diff options
| author | Steve Twiss <stwiss.opensource@diasemi.com> | 2016-07-20 15:53:58 +0100 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2016-07-20 17:00:34 +0100 |
| commit | 707319b60ade4fefa4fc31138f4147f2a5abb88b (patch) | |
| tree | 22f93230a5bd45c250a6b47c59f8c09d6bdc14b3 /drivers/regulator | |
| parent | 1a695a905c18548062509178b98bc91e67510864 (diff) | |
regulator: da9053/52: Fix incorrectly stated minimum and maximum voltage limits
This fix alters the minimum and maximum BUCK voltage limits for DA9052 and
DA9053. It does so for the following cases:
DA9052
- BUCK3 (MEM)
min: 0.925V -> 0.950V
max: 2.500V -> 2.525V
DA9053
- BUCK3 (MEM)
min: 0.925V -> 0.950V
max: 2.500V -> 2.525V
- BUCK4 (PERI)
min: 0.925V -> 0.950V
max: 2.500V -> 2.525V
The voltage range remains the same, but the limits are shifted by +0.025V.
This change is provided on DA9052:MEM, DA9053:MEM and DA9053:PERI
and is a voltage difference of 0.025V, compared to those measured before
this fix is applied. The patch has the effect of decreasing *all* measured
voltages on those BUCKs when compared against the previously measured
values for the same software voltage request.
For example, with this fix applied for DA9052:MEM, DA9053:MEM and
DA9053:PERI, the following is true.
Because the previous software defined slot 0 as being 0.925V, if a request
for 0.950V was previously sent, the slot 1 voltage would have been used.
This would have corresponded to an actual measured voltage of 0.975V. But,
with this patch fix, and with slot 0 properly aligned to 0.950V, if a
voltage of 0.950V is requested by software, a measured value of 0.950V will
be provided.
Tested-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/regulator')
| -rw-r--r-- | drivers/regulator/da9052-regulator.c | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c index 1050cb77561a..9ececfef42d6 100644 --- a/drivers/regulator/da9052-regulator.c +++ b/drivers/regulator/da9052-regulator.c @@ -333,7 +333,7 @@ static const struct regulator_ops da9052_ldo_ops = { static struct da9052_regulator_info da9052_regulator_info[] = { DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO), DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO), - DA9052_DCDC(BUCK3, 25, 925, 2500, 6, 6, DA9052_SUPPLY_VBMEMGO), + DA9052_DCDC(BUCK3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO), DA9052_DCDC(BUCK4, 50, 1800, 3600, 5, 6, 0), DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0), DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO), @@ -350,8 +350,8 @@ static struct da9052_regulator_info da9052_regulator_info[] = { static struct da9052_regulator_info da9053_regulator_info[] = { DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO), DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO), - DA9052_DCDC(BUCK3, 25, 925, 2500, 6, 6, DA9052_SUPPLY_VBMEMGO), - DA9052_DCDC(BUCK4, 25, 925, 2500, 6, 6, 0), + DA9052_DCDC(BUCK3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO), + DA9052_DCDC(BUCK4, 25, 950, 2525, 6, 6, 0), DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0), DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO), DA9052_LDO(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO), |