nvme: fix deadlock in disconnect during scan_work and/or ana_work

A deadlock happens in the following scenario with multipath:
1) scan_work(nvme0) detects a new nsid while nvme0
    is an optimized path to it, path nvme1 happens to be
    inaccessible.

2) Before scan_work is complete nvme0 disconnect is initiated
    nvme_delete_ctrl_sync() sets nvme0 state to NVME_CTRL_DELETING

3) scan_work(1) attempts to submit IO,
    but nvme_path_is_optimized() observes nvme0 is not LIVE.
    Since nvme1 is a possible path IO is requeued and scan_work hangs.

--
Workqueue: nvme-wq nvme_scan_work [nvme_core]
kernel: Call Trace:
kernel:  __schedule+0x2b9/0x6c0
kernel:  schedule+0x42/0xb0
kernel:  io_schedule+0x16/0x40
kernel:  do_read_cache_page+0x438/0x830
kernel:  read_cache_page+0x12/0x20
kernel:  read_dev_sector+0x27/0xc0
kernel:  read_lba+0xc1/0x220
kernel:  efi_partition+0x1e6/0x708
kernel:  check_partition+0x154/0x244
kernel:  rescan_partitions+0xae/0x280
kernel:  __blkdev_get+0x40f/0x560
kernel:  blkdev_get+0x3d/0x140
kernel:  __device_add_disk+0x388/0x480
kernel:  device_add_disk+0x13/0x20
kernel:  nvme_mpath_set_live+0x119/0x140 [nvme_core]
kernel:  nvme_update_ns_ana_state+0x5c/0x60 [nvme_core]
kernel:  nvme_set_ns_ana_state+0x1e/0x30 [nvme_core]
kernel:  nvme_parse_ana_log+0xa1/0x180 [nvme_core]
kernel:  nvme_mpath_add_disk+0x47/0x90 [nvme_core]
kernel:  nvme_validate_ns+0x396/0x940 [nvme_core]
kernel:  nvme_scan_work+0x24f/0x380 [nvme_core]
kernel:  process_one_work+0x1db/0x380
kernel:  worker_thread+0x249/0x400
kernel:  kthread+0x104/0x140
--

4) Delete also hangs in flush_work(ctrl->scan_work)
    from nvme_remove_namespaces().

Similiarly a deadlock with ana_work may happen: if ana_work has started
and calls nvme_mpath_set_live and device_add_disk, it will
trigger I/O. When we trigger disconnect I/O will block because
our accessible (optimized) path is disconnecting, but the alternate
path is inaccessible, so I/O blocks. Then disconnect tries to flush
the ana_work and hangs.

[  605.550896] Workqueue: nvme-wq nvme_ana_work [nvme_core]
[  605.552087] Call Trace:
[  605.552683]  __schedule+0x2b9/0x6c0
[  605.553507]  schedule+0x42/0xb0
[  605.554201]  io_schedule+0x16/0x40
[  605.555012]  do_read_cache_page+0x438/0x830
[  605.556925]  read_cache_page+0x12/0x20
[  605.557757]  read_dev_sector+0x27/0xc0
[  605.558587]  amiga_partition+0x4d/0x4c5
[  605.561278]  check_partition+0x154/0x244
[  605.562138]  rescan_partitions+0xae/0x280
[  605.563076]  __blkdev_get+0x40f/0x560
[  605.563830]  blkdev_get+0x3d/0x140
[  605.564500]  __device_add_disk+0x388/0x480
[  605.565316]  device_add_disk+0x13/0x20
[  605.566070]  nvme_mpath_set_live+0x5e/0x130 [nvme_core]
[  605.567114]  nvme_update_ns_ana_state+0x2c/0x30 [nvme_core]
[  605.568197]  nvme_update_ana_state+0xca/0xe0 [nvme_core]
[  605.569360]  nvme_parse_ana_log+0xa1/0x180 [nvme_core]
[  605.571385]  nvme_read_ana_log+0x76/0x100 [nvme_core]
[  605.572376]  nvme_ana_work+0x15/0x20 [nvme_core]
[  605.573330]  process_one_work+0x1db/0x380
[  605.574144]  worker_thread+0x4d/0x400
[  605.574896]  kthread+0x104/0x140
[  605.577205]  ret_from_fork+0x35/0x40
[  605.577955] INFO: task nvme:14044 blocked for more than 120 seconds.
[  605.579239]       Tainted: G           OE     5.3.5-050305-generic #201910071830
[  605.580712] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  605.582320] nvme            D    0 14044  14043 0x00000000
[  605.583424] Call Trace:
[  605.583935]  __schedule+0x2b9/0x6c0
[  605.584625]  schedule+0x42/0xb0
[  605.585290]  schedule_timeout+0x203/0x2f0
[  605.588493]  wait_for_completion+0xb1/0x120
[  605.590066]  __flush_work+0x123/0x1d0
[  605.591758]  __cancel_work_timer+0x10e/0x190
[  605.593542]  cancel_work_sync+0x10/0x20
[  605.594347]  nvme_mpath_stop+0x2f/0x40 [nvme_core]
[  605.595328]  nvme_stop_ctrl+0x12/0x50 [nvme_core]
[  605.596262]  nvme_do_delete_ctrl+0x3f/0x90 [nvme_core]
[  605.597333]  nvme_sysfs_delete+0x5c/0x70 [nvme_core]
[  605.598320]  dev_attr_store+0x17/0x30

Fix this by introducing a new state: NVME_CTRL_DELETE_NOIO, which will
indicate the phase of controller deletion where I/O cannot be allowed
to access the namespace. NVME_CTRL_DELETING still allows mpath I/O to
be issued to the bottom device, and only after we flush the ana_work
and scan_work (after nvme_stop_ctrl and nvme_prep_remove_namespaces)
we change the state to NVME_CTRL_DELETING_NOIO. Also we prevent ana_work
from re-firing by aborting early if we are not LIVE, so we should be safe
here.

In addition, change the transport drivers to follow the updated state
machine.

Fixes: 0d0b660f214d ("nvme: add ANA support")
Reported-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

1 files changed, 6 insertions, 0 deletions

diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 92629758b77c..1609267a1f0e 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -190,6 +190,11 @@ static inline u16 nvme_req_qid(struct request *req)
  * @NVME_CTRL_CONNECTING:	Controller is disconnected, now connecting the
  *				transport
  * @NVME_CTRL_DELETING:		Controller is deleting (or scheduled deletion)
+ * @NVME_CTRL_DELETING_NOIO:	Controller is deleting and I/O is not
+ *				disabled/failed immediately. This state comes
+ * 				after all async event processing took place and
+ * 				before ns removal and the controller deletion
+ * 				progress
  * @NVME_CTRL_DEAD:		Controller is non-present/unresponsive during
  *				shutdown or removal. In this case we forcibly
  *				kill all inflight I/O as they have no chance to
@@ -201,6 +206,7 @@ enum nvme_ctrl_state {
 	NVME_CTRL_RESETTING,
 	NVME_CTRL_CONNECTING,
 	NVME_CTRL_DELETING,
+	NVME_CTRL_DELETING_NOIO,
 	NVME_CTRL_DEAD,
 };