ixgbe: do not use ixgbe specific mdio defines

Replace some ixgbe specific MDIO defines with their equivalent
from the kernel.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

3 files changed, 33 insertions, 56 deletions

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
index 648739a3904a..ebf46afd08b0 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -2395,9 +2395,7 @@ s32 ixgbe_set_copper_phy_power(struct ixgbe_hw *hw, bool on)
 	if (!on && ixgbe_mng_present(hw))
 		return 0;
 
-	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL,
-				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
-				      &reg);
+	status = hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_VEND1, &reg);
 	if (status)
 		return status;
 
@@ -2409,8 +2407,6 @@ s32 ixgbe_set_copper_phy_power(struct ixgbe_hw *hw, bool on)
 		reg |= IXGBE_MDIO_PHY_SET_LOW_POWER_MODE;
 	}
 
-	status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL,
-				       IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
-				       reg);
+	status = hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_VEND1, reg);
 	return status;
 }
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 82813f98b8c1..6886e57d12f7 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -874,19 +874,13 @@ struct ixgbe_thermal_sensor_data {
 #define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB	0x4 /* 1Gb/s */
 #define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB	0x6 /* 10Gb/s */
 
-#define IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG	0x20	/* 10G Control Reg */
 #define IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG 0xC400	/* 1G Provisioning 1 */
 #define IXGBE_MII_AUTONEG_XNP_TX_REG		0x17	/* 1G XNP Transmit */
-#define IXGBE_MII_AUTONEG_ADVERTISE_REG		0x10	/* 100M Advertisement */
-#define IXGBE_MII_10GBASE_T_ADVERTISE		0x1000	/* full duplex, bit:12*/
 #define IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX	0x4000	/* full duplex, bit:14*/
 #define IXGBE_MII_1GBASE_T_ADVERTISE		0x8000	/* full duplex, bit:15*/
 #define IXGBE_MII_2_5GBASE_T_ADVERTISE		0x0400
 #define IXGBE_MII_5GBASE_T_ADVERTISE		0x0800
-#define IXGBE_MII_100BASE_T_ADVERTISE		0x0100	/* full duplex, bit:8 */
-#define IXGBE_MII_100BASE_T_ADVERTISE_HALF	0x0080	/* half duplex, bit:7 */
 #define IXGBE_MII_RESTART			0x200
-#define IXGBE_MII_AUTONEG_COMPLETE		0x20
 #define IXGBE_MII_AUTONEG_LINK_UP		0x04
 #define IXGBE_MII_AUTONEG_REG			0x0
 
@@ -1320,30 +1314,20 @@ struct ixgbe_thermal_sensor_data {
 /* MDIO definitions */
 
 #define IXGBE_MDIO_ZERO_DEV_TYPE		0x0
-#define IXGBE_MDIO_PMA_PMD_DEV_TYPE		0x1
 #define IXGBE_MDIO_PCS_DEV_TYPE		0x3
-#define IXGBE_MDIO_PHY_XS_DEV_TYPE		0x4
-#define IXGBE_MDIO_AUTO_NEG_DEV_TYPE		0x7
-#define IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE	0x1E   /* Device 30 */
 #define IXGBE_TWINAX_DEV			1
 
 #define IXGBE_MDIO_COMMAND_TIMEOUT     100 /* PHY Timeout for 1 GB mode */
 
-#define IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL      0x0    /* VS1 Control Reg */
-#define IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS       0x1    /* VS1 Status Reg */
 #define IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS  0x0008 /* 1 = Link Up */
 #define IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS 0x0010 /* 0 - 10G, 1 - 1G */
 #define IXGBE_MDIO_VENDOR_SPECIFIC_1_10G_SPEED    0x0018
 #define IXGBE_MDIO_VENDOR_SPECIFIC_1_1G_SPEED     0x0010
 
-#define IXGBE_MDIO_AUTO_NEG_CONTROL	0x0 /* AUTO_NEG Control Reg */
-#define IXGBE_MDIO_AUTO_NEG_STATUS	0x1 /* AUTO_NEG Status Reg */
 #define IXGBE_MDIO_AUTO_NEG_VENDOR_STAT	0xC800 /* AUTO_NEG Vendor Status Reg */
 #define IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM  0xCC00 /* AUTO_NEG Vendor TX Reg */
 #define IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2 0xCC01 /* AUTO_NEG Vendor Tx Reg */
 #define IXGBE_MDIO_AUTO_NEG_VEN_LSC	0x1 /* AUTO_NEG Vendor Tx LSC */
-#define IXGBE_MDIO_AUTO_NEG_ADVT	0x10 /* AUTO_NEG Advt Reg */
-#define IXGBE_MDIO_AUTO_NEG_LP		0x13 /* AUTO_NEG LP Status Reg */
 #define IXGBE_MDIO_AUTO_NEG_EEE_ADVT	0x3C /* AUTO_NEG EEE Advt Reg */
 
 #define IXGBE_MDIO_PHY_SET_LOW_POWER_MODE	 0x0800 /* Set low power mode */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index f4385fcd7147..e9fa83baa00a 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -1571,8 +1571,7 @@ static s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw,
 	 /* MAC link is up, so check external PHY link.
 	  * Read this twice back to back to indicate current status.
 	  */
-	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
-				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+	status = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN,
 				      &autoneg_status);
 	if (status)
 		return status;
@@ -1758,7 +1757,7 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
 
 	/* Vendor alarm triggered */
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG,
-				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      MDIO_MMD_VEND1,
 				      &reg);
 
 	if (status || !(reg & IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN))
@@ -1766,7 +1765,7 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
 
 	/* Vendor Auto-Neg alarm triggered or Global alarm 1 triggered */
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_FLAG,
-				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      MDIO_MMD_VEND1,
 				      &reg);
 
 	if (status || !(reg & (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN |
@@ -1775,7 +1774,7 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
 
 	/* Global alarm triggered */
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_ALARM_1,
-				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      MDIO_MMD_VEND1,
 				      &reg);
 
 	if (status)
@@ -1790,7 +1789,7 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
 	if (reg & IXGBE_MDIO_GLOBAL_ALM_1_DEV_FAULT) {
 		/*  device fault alarm triggered */
 		status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_FAULT_MSG,
-					  IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+					  MDIO_MMD_VEND1,
 					  &reg);
 		if (status)
 			return status;
@@ -1805,14 +1804,14 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
 
 	/* Vendor alarm 2 triggered */
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG,
-				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &reg);
+				      MDIO_MMD_AN, &reg);
 
 	if (status || !(reg & IXGBE_MDIO_GLOBAL_STD_ALM2_INT))
 		return status;
 
 	/* link connect/disconnect event occurred */
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2,
-				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &reg);
+				      MDIO_MMD_AN, &reg);
 
 	if (status)
 		return status;
@@ -1844,20 +1843,20 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
 
 	/* Enable link status change alarm */
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
-				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &reg);
+				      MDIO_MMD_AN, &reg);
 	if (status)
 		return status;
 
 	reg |= IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN;
 
 	status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
-				       IXGBE_MDIO_AUTO_NEG_DEV_TYPE, reg);
+				       MDIO_MMD_AN, reg);
 	if (status)
 		return status;
 
 	/* Enable high temperature failure and global fault alarms */
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK,
-				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      MDIO_MMD_VEND1,
 				      &reg);
 	if (status)
 		return status;
@@ -1866,14 +1865,14 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
 		IXGBE_MDIO_GLOBAL_INT_DEV_FAULT_EN);
 
 	status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK,
-				       IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				       MDIO_MMD_VEND1,
 				       reg);
 	if (status)
 		return status;
 
 	/* Enable vendor Auto-Neg alarm and Global Interrupt Mask 1 alarm */
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK,
-				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      MDIO_MMD_VEND1,
 				      &reg);
 	if (status)
 		return status;
@@ -1882,14 +1881,14 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
 		IXGBE_MDIO_GLOBAL_ALARM_1_INT);
 
 	status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK,
-				       IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				       MDIO_MMD_VEND1,
 				       reg);
 	if (status)
 		return status;
 
 	/* Enable chip-wide vendor alarm */
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK,
-				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      MDIO_MMD_VEND1,
 				      &reg);
 	if (status)
 		return status;
@@ -1897,7 +1896,7 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
 	reg |= IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN;
 
 	status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK,
-				       IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				       MDIO_MMD_VEND1,
 				       reg);
 
 	return status;
@@ -2038,14 +2037,12 @@ static s32 ixgbe_ext_phy_t_x550em_get_link(struct ixgbe_hw *hw, bool *link_up)
 	*link_up = false;
 
 	/* read this twice back to back to indicate current status */
-	ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
-				   IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+	ret = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN,
 				   &autoneg_status);
 	if (ret)
 		return ret;
 
-	ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
-				   IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+	ret = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN,
 				   &autoneg_status);
 	if (ret)
 		return ret;
@@ -2091,7 +2088,7 @@ static s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw)
 		return 0;
 
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
-				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      MDIO_MMD_AN,
 				      &speed);
 	if (status)
 		return status;
@@ -2152,10 +2149,10 @@ static s32 ixgbe_led_on_t_x550em(struct ixgbe_hw *hw, u32 led_idx)
 
 	/* To turn on the LED, set mode to ON. */
 	hw->phy.ops.read_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
-			     IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data);
+			     MDIO_MMD_VEND1, &phy_data);
 	phy_data |= IXGBE_X557_LED_MANUAL_SET_MASK;
 	hw->phy.ops.write_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
-			      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data);
+			      MDIO_MMD_VEND1, phy_data);
 
 	return 0;
 }
@@ -2174,10 +2171,10 @@ static s32 ixgbe_led_off_t_x550em(struct ixgbe_hw *hw, u32 led_idx)
 
 	/* To turn on the LED, set mode to ON. */
 	hw->phy.ops.read_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
-			     IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data);
+			     MDIO_MMD_VEND1, &phy_data);
 	phy_data &= ~IXGBE_X557_LED_MANUAL_SET_MASK;
 	hw->phy.ops.write_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
-			      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data);
+			      MDIO_MMD_VEND1, phy_data);
 
 	return 0;
 }
@@ -2198,7 +2195,7 @@ static s32 ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw,
 	*lcd_speed = IXGBE_LINK_SPEED_UNKNOWN;
 
 	status = hw->phy.ops.read_reg(hw, IXGBE_AUTO_NEG_LP_STATUS,
-				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      MDIO_MMD_AN,
 				      &an_lp_status);
 	if (status)
 		return status;
@@ -2345,7 +2342,7 @@ static s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
 		return ixgbe_set_copper_phy_power(hw, false);
 
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
-				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      MDIO_MMD_AN,
 				      &speed);
 	if (status)
 		return status;
@@ -2367,20 +2364,20 @@ static s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
 
 	/* Clear AN completed indication */
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM,
-				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      MDIO_MMD_AN,
 				      &autoneg_reg);
 	if (status)
 		return status;
 
-	status = hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
-				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+	status = hw->phy.ops.read_reg(hw, MDIO_AN_10GBT_CTRL,
+				      MDIO_MMD_AN,
 				      &an_10g_cntl_reg);
 	if (status)
 		return status;
 
 	status = hw->phy.ops.read_reg(hw,
 				      IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
-				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      MDIO_MMD_AN,
 				      &autoneg_reg);
 	if (status)
 		return status;
@@ -2538,7 +2535,7 @@ static s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw)
 
 	status = hw->phy.ops.read_reg(hw,
 				      IXGBE_MDIO_TX_VENDOR_ALARMS_3,
-				      IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+				      MDIO_MMD_PMAPMD,
 				      &reg);
 	if (status)
 		return status;
@@ -2549,7 +2546,7 @@ static s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw)
 	if (reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) {
 		status = hw->phy.ops.read_reg(hw,
 					IXGBE_MDIO_GLOBAL_RES_PR_10,
-					IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+					MDIO_MMD_VEND1,
 					&reg);
 		if (status)
 			return status;
@@ -2558,7 +2555,7 @@ static s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw)
 
 		status = hw->phy.ops.write_reg(hw,
 					IXGBE_MDIO_GLOBAL_RES_PR_10,
-					IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+					MDIO_MMD_VEND1,
 					reg);
 		if (status)
 			return status;