summaryrefslogtreecommitdiff
path: root/drivers/mtd
diff options
context:
space:
mode:
authorPekon Gupta <pekon@ti.com>2013-10-24 18:20:20 +0530
committerBrian Norris <computersforpeace@gmail.com>2013-11-06 23:33:08 -0800
commitf18befb57b0779094ac7658fa7be5cf559da835f (patch)
treefe73befc203731491a2ad549ec8763483e9bb10c /drivers/mtd
parent633deb58e1ecc81486505fe9d3dc2aa3cfbca719 (diff)
mtd: nand: omap: use DT specified bus-width only for scanning NAND device
This patch: - calls nand_scan_ident() using bus-width as passed by DT - removes double calls to nand_scan_ident(), in case first call fails then omap_nand_probe just returns error. Signed-off-by: Pekon Gupta <pekon@ti.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/nand/omap2.c21
1 files changed, 9 insertions, 12 deletions
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 5596368a3574..f464321c598d 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -1856,7 +1856,6 @@ static int omap_nand_probe(struct platform_device *pdev)
mtd->name = dev_name(&pdev->dev);
mtd->owner = THIS_MODULE;
nand_chip = &info->nand;
- nand_chip->options = pdata->devsize;
nand_chip->options |= NAND_SKIP_BBTSCAN;
#ifdef CONFIG_MTD_NAND_OMAP_BCH
info->of_node = pdata->of_node;
@@ -1904,6 +1903,15 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip->chip_delay = 50;
}
+ /* scan NAND device connected to chip controller */
+ nand_chip->options |= pdata->devsize & NAND_BUSWIDTH_16;
+ if (nand_scan_ident(mtd, 1, NULL)) {
+ pr_err("nand device scan failed, may be bus-width mismatch\n");
+ err = -ENXIO;
+ goto out_release_mem_region;
+ }
+
+ /* re-populate low-level callbacks based on xfer modes */
switch (pdata->xfer_type) {
case NAND_OMAP_PREFETCH_POLLED:
nand_chip->read_buf = omap_read_buf_pref;
@@ -2011,17 +2019,6 @@ static int omap_nand_probe(struct platform_device *pdev)
}
}
- /* DIP switches on some boards change between 8 and 16 bit
- * bus widths for flash. Try the other width if the first try fails.
- */
- if (nand_scan_ident(mtd, 1, NULL)) {
- nand_chip->options ^= NAND_BUSWIDTH_16;
- if (nand_scan_ident(mtd, 1, NULL)) {
- err = -ENXIO;
- goto out_release_mem_region;
- }
- }
-
/* rom code layout */
if (pdata->ecc_opt == OMAP_ECC_HAM1_CODE_HW) {