Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "The irq departement delivers:

   - a cleanup series to get rid of mindlessly copied code.

   - another bunch of new pointlessly different interrupt chip drivers.

     Adding homebrewn irq chips (and timers) to SoCs must provide a
     value add which is beyond the imagination of mere mortals.

   - the usual SoC irq controller updates, IOW my second cat herding
     project"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
  irqchip: gic-v3: Implement CPU PM notifier
  irqchip: gic-v3: Refactor gic_enable_redist to support both enabling and disabling
  irqchip: renesas-intc-irqpin: Add minimal runtime PM support
  irqchip: renesas-intc-irqpin: Add helper variable dev = &pdev->dev
  irqchip: atmel-aic5: Add sama5d4 support
  irqchip: atmel-aic5: The sama5d3 has 48 IRQs
  Documentation: bcm7120-l2: Add Broadcom BCM7120-style L2 binding
  irqchip: bcm7120-l2: Add Broadcom BCM7120-style Level 2 interrupt controller
  irqchip: renesas-irqc: Add binding docs for new R-Car Gen2 SoCs
  irqchip: renesas-irqc: Add DT binding documentation
  irqchip: renesas-intc-irqpin: Document SoC-specific bindings
  openrisc: Get rid of handle_IRQ
  arm64: Get rid of handle_IRQ
  ARM: omap2: irq: Convert to handle_domain_irq
  ARM: imx: tzic: Convert to handle_domain_irq
  ARM: imx: avic: Convert to handle_domain_irq
  irqchip: or1k-pic: Convert to handle_domain_irq
  irqchip: atmel-aic5: Convert to handle_domain_irq
  irqchip: atmel-aic: Convert to handle_domain_irq
  irqchip: gic-v3: Convert to handle_domain_irq
  ...

1 files changed, 9 insertions, 6 deletions

diff --git a/drivers/irqchip/irq-gic-common.c b/drivers/irqchip/irq-gic-common.c
index 60ac704d2090..61541ff24397 100644
--- a/drivers/irqchip/irq-gic-common.c
+++ b/drivers/irqchip/irq-gic-common.c
@@ -74,20 +74,22 @@ void __init gic_dist_config(void __iomem *base, int gic_irqs,
 	 * Set all global interrupts to be level triggered, active low.
 	 */
 	for (i = 32; i < gic_irqs; i += 16)
-		writel_relaxed(0, base + GIC_DIST_CONFIG + i / 4);
+		writel_relaxed(GICD_INT_ACTLOW_LVLTRIG,
+					base + GIC_DIST_CONFIG + i / 4);
 
 	/*
 	 * Set priority on all global interrupts.
 	 */
 	for (i = 32; i < gic_irqs; i += 4)
-		writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i);
+		writel_relaxed(GICD_INT_DEF_PRI_X4, base + GIC_DIST_PRI + i);
 
 	/*
 	 * Disable all interrupts.  Leave the PPI and SGIs alone
 	 * as they are enabled by redistributor registers.
 	 */
 	for (i = 32; i < gic_irqs; i += 32)
-		writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i / 8);
+		writel_relaxed(GICD_INT_EN_CLR_X32,
+					base + GIC_DIST_ENABLE_CLEAR + i / 8);
 
 	if (sync_access)
 		sync_access();
@@ -101,14 +103,15 @@ void gic_cpu_config(void __iomem *base, void (*sync_access)(void))
 	 * Deal with the banked PPI and SGI interrupts - disable all
 	 * PPI interrupts, ensure all SGI interrupts are enabled.
 	 */
-	writel_relaxed(0xffff0000, base + GIC_DIST_ENABLE_CLEAR);
-	writel_relaxed(0x0000ffff, base + GIC_DIST_ENABLE_SET);
+	writel_relaxed(GICD_INT_EN_CLR_PPI, base + GIC_DIST_ENABLE_CLEAR);
+	writel_relaxed(GICD_INT_EN_SET_SGI, base + GIC_DIST_ENABLE_SET);
 
 	/*
 	 * Set priority on PPI and SGI interrupts
 	 */
 	for (i = 0; i < 32; i += 4)
-		writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
+		writel_relaxed(GICD_INT_DEF_PRI_X4,
+					base + GIC_DIST_PRI + i * 4 / 4);
 
 	if (sync_access)
 		sync_access();