diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2010-09-27 12:32:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2010-09-27 12:32:36 -0700 |
commit | 6e029fe3737b022610ededf9e70ee84fb2bdc045 (patch) | |
tree | 0fc7a86e17014907d32e1b6dcb3b8b310b495870 /arch | |
parent | 26d1e7ced7a51c9ebcff058a9671513fe1fe05b1 (diff) | |
parent | 2de59fea8b3095d1df4c729fda041625930aab4f (diff) |
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (28 commits)
ARM: 6411/1: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
ARM: 6409/1: davinci: map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE
ARM: 6408/1: omap: Map only available sram memory
ARM: 6407/1: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries
ARM: pxa: remove pr_<level> uses of KERN_<level>
ARM: pxa168fb: clear enable bit when not active
ARM: pxa: fix cpu_is_pxa*() not expanding to zero when not configured
ARM: pxa168: fix corrected reset vector
ARM: pxa: Use PIO for PI2C communication on Palm27x
ARM: pxa: Fix Vpac270 gpio_power for MMC
ARM: 6401/1: plug a race in the alignment trap handler
ARM: 6406/1: at91sam9g45: fix i2c bus speed
leds: leds-ns2: fix locking
ARM: dove: fix __io() definition to use bus based offset
dmaengine: fix interrupt clearing for mv_xor
ARM: kirkwood: Unbreak PCIe I/O port
ARM: Fix build error when using KCONFIG_CONFIG
ARM: 6383/1: Implement phys_mem_access_prot() to avoid attributes aliasing
ARM: 6400/1: at91: fix arch_gettimeoffset fallout
ARM: 6398/1: add proc info for ARM11MPCore/Cortex-A9 from ARM
...
Diffstat (limited to 'arch')
24 files changed, 199 insertions, 74 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 553b7cf17bfb..88c97bc7a6f5 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -271,7 +271,6 @@ config ARCH_AT91 bool "Atmel AT91" select ARCH_REQUIRE_GPIOLIB select HAVE_CLK - select ARCH_USES_GETTIMEOFFSET help This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 and AT91CAP9 processors. @@ -1051,6 +1050,32 @@ config ARM_ERRATA_460075 ACTLR register. Note that setting specific bits in the ACTLR register may not be available in non-secure mode. +config ARM_ERRATA_742230 + bool "ARM errata: DMB operation may be faulty" + depends on CPU_V7 && SMP + help + This option enables the workaround for the 742230 Cortex-A9 + (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction + between two write operations may not ensure the correct visibility + ordering of the two writes. This workaround sets a specific bit in + the diagnostic register of the Cortex-A9 which causes the DMB + instruction to behave as a DSB, ensuring the correct behaviour of + the two writes. + +config ARM_ERRATA_742231 + bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption" + depends on CPU_V7 && SMP + help + This option enables the workaround for the 742231 Cortex-A9 + (r2p0..r2p2) erratum. Under certain conditions, specific to the + Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode, + accessing some data located in the same cache line, may get corrupted + data due to bad handling of the address hazard when the line gets + replaced from one of the CPUs at the same time as another CPU is + accessing it. This workaround sets specific bits in the diagnostic + register of the Cortex-A9 which reduces the linefill issuing + capabilities of the processor. + config PL310_ERRATA_588369 bool "Clean & Invalidate maintenance operations do not invalidate clean lines" depends on CACHE_L2X0 && ARCH_OMAP4 diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index b23f6bc46cfa..65a7c1c588a9 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -116,5 +116,5 @@ CFLAGS_font.o := -Dstatic= $(obj)/font.c: $(FONTC) $(call cmd,shipped) -$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile .config +$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile $(KCONFIG_CONFIG) @sed "$(SEDFLAGS)" < $< > $@ diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index ab68cf1ef80f..e90b167ea848 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -317,6 +317,10 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; } #ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE #define pgprot_dmacoherent(prot) \ __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE) +#define __HAVE_PHYS_MEM_ACCESS_PROT +struct file; +extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, + unsigned long size, pgprot_t vma_prot); #else #define pgprot_dmacoherent(prot) \ __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_UNCACHED) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 1b560825e1cf..7885722bdf4e 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -48,6 +48,8 @@ work_pending: beq no_work_pending mov r0, sp @ 'regs' mov r2, why @ 'syscall' + tst r1, #_TIF_SIGPENDING @ delivering a signal? + movne why, #0 @ prevent further restarts bl do_notify_resume b ret_slow_syscall @ Check work again diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 5e71ccd5e7d3..1276babf84d5 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -426,7 +426,7 @@ static struct i2c_gpio_platform_data pdata_i2c0 = { .sda_is_open_drain = 1, .scl_pin = AT91_PIN_PA21, .scl_is_open_drain = 1, - .udelay = 2, /* ~100 kHz */ + .udelay = 5, /* ~100 kHz */ }; static struct platform_device at91sam9g45_twi0_device = { @@ -440,7 +440,7 @@ static struct i2c_gpio_platform_data pdata_i2c1 = { .sda_is_open_drain = 1, .scl_pin = AT91_PIN_PB11, .scl_is_open_drain = 1, - .udelay = 2, /* ~100 kHz */ + .udelay = 5, /* ~100 kHz */ }; static struct platform_device at91sam9g45_twi1_device = { diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 3d996b659ff4..9be261beae7d 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -769,8 +769,7 @@ static struct map_desc dm355_io_desc[] = { .virtual = SRAM_VIRT, .pfn = __phys_to_pfn(0x00010000), .length = SZ_32K, - /* MT_MEMORY_NONCACHED requires supersection alignment */ - .type = MT_DEVICE, + .type = MT_MEMORY_NONCACHED, }, }; diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 6b6f4c643709..7781e35daec3 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -969,8 +969,7 @@ static struct map_desc dm365_io_desc[] = { .virtual = SRAM_VIRT, .pfn = __phys_to_pfn(0x00010000), .length = SZ_32K, - /* MT_MEMORY_NONCACHED requires supersection alignment */ - .type = MT_DEVICE, + .type = MT_MEMORY_NONCACHED, }, }; diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 40fec315c99a..5e5b0a7831fb 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -653,8 +653,7 @@ static struct map_desc dm644x_io_desc[] = { .virtual = SRAM_VIRT, .pfn = __phys_to_pfn(0x00008000), .length = SZ_16K, - /* MT_MEMORY_NONCACHED requires supersection alignment */ - .type = MT_DEVICE, + .type = MT_MEMORY_NONCACHED, }, }; diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index e4a3df1872ac..26e8a9c7f50b 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -737,8 +737,7 @@ static struct map_desc dm646x_io_desc[] = { .virtual = SRAM_VIRT, .pfn = __phys_to_pfn(0x00010000), .length = SZ_32K, - /* MT_MEMORY_NONCACHED requires supersection alignment */ - .type = MT_DEVICE, + .type = MT_MEMORY_NONCACHED, }, }; diff --git a/arch/arm/mach-dove/include/mach/io.h b/arch/arm/mach-dove/include/mach/io.h index 3b3e4721ce2e..eb4936ff90ad 100644 --- a/arch/arm/mach-dove/include/mach/io.h +++ b/arch/arm/mach-dove/include/mach/io.h @@ -13,8 +13,8 @@ #define IO_SPACE_LIMIT 0xffffffff -#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_PHYS_BASE) +\ - DOVE_PCIE0_IO_VIRT_BASE)) -#define __mem_pci(a) (a) +#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_BUS_BASE) + \ + DOVE_PCIE0_IO_VIRT_BASE)) +#define __mem_pci(a) (a) #endif diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index 93fc2ec95e76..6e924b398919 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -38,7 +38,7 @@ #define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000 #define KIRKWOOD_PCIE1_IO_VIRT_BASE 0xfef00000 -#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00000000 +#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00100000 #define KIRKWOOD_PCIE1_IO_SIZE SZ_1M #define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000 diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 55e7f00836b7..513ad3102d7c 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -117,7 +117,7 @@ static void __init pcie0_ioresources_init(struct pcie_port *pp) * IORESOURCE_IO */ pp->res[0].name = "PCIe 0 I/O Space"; - pp->res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE; + pp->res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE; pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1; pp->res[0].flags = IORESOURCE_IO; @@ -139,7 +139,7 @@ static void __init pcie1_ioresources_init(struct pcie_port *pp) * IORESOURCE_IO */ pp->res[0].name = "PCIe 1 I/O Space"; - pp->res[0].start = KIRKWOOD_PCIE1_IO_PHYS_BASE; + pp->res[0].start = KIRKWOOD_PCIE1_IO_BUS_BASE; pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1; pp->res[0].flags = IORESOURCE_IO; diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h index 4f5b0e0ce6cf..1a8a25edb1b4 100644 --- a/arch/arm/mach-mmp/include/mach/system.h +++ b/arch/arm/mach-mmp/include/mach/system.h @@ -9,6 +9,8 @@ #ifndef __ASM_MACH_SYSTEM_H #define __ASM_MACH_SYSTEM_H +#include <mach/cputype.h> + static inline void arch_idle(void) { cpu_do_idle(); @@ -16,6 +18,9 @@ static inline void arch_idle(void) static inline void arch_reset(char mode, const char *cmd) { - cpu_reset(0); + if (cpu_is_pxa168()) + cpu_reset(0xffff0000); + else + cpu_reset(0); } #endif /* __ASM_MACH_SYSTEM_H */ diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c index 50d5939a78f1..58093d9e07be 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c @@ -312,8 +312,7 @@ static int pxa_set_target(struct cpufreq_policy *policy, freqs.cpu = policy->cpu; if (freq_debug) - pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, " - "(SDRAM %d Mhz)\n", + pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n", freqs.new / 1000, (pxa_freq_settings[idx].div2) ? (new_freq_mem / 2000) : (new_freq_mem / 1000)); diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index 428cc7bda9a4..814f1458a06a 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -264,23 +264,35 @@ * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x * == 0x3 for pxa300/pxa310/pxa320 */ +#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x) #define __cpu_is_pxa2xx(id) \ ({ \ unsigned int _id = (id) >> 13 & 0x7; \ _id <= 0x2; \ }) +#else +#define __cpu_is_pxa2xx(id) (0) +#endif +#ifdef CONFIG_PXA3xx #define __cpu_is_pxa3xx(id) \ ({ \ unsigned int _id = (id) >> 13 & 0x7; \ _id == 0x3; \ }) +#else +#define __cpu_is_pxa3xx(id) (0) +#endif +#if defined(CONFIG_CPU_PXA930) || defined(CONFIG_CPU_PXA935) #define __cpu_is_pxa93x(id) \ ({ \ unsigned int _id = (id) >> 4 & 0xfff; \ _id == 0x683 || _id == 0x693; \ }) +#else +#define __cpu_is_pxa93x(id) (0) +#endif #define cpu_is_pxa2xx() \ ({ \ diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 77ad6d34ab5b..405b92a29793 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -469,9 +469,13 @@ static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = { }, }; +static struct i2c_pxa_platform_data palm27x_i2c_power_info = { + .use_pio = 1, +}; + void __init palm27x_pmic_init(void) { i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info)); - pxa27x_set_i2c_power_info(NULL); + pxa27x_set_i2c_power_info(&palm27x_i2c_power_info); } #endif diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index c9b747cedea8..37d6173bbb66 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -240,6 +240,7 @@ static void __init vpac270_onenand_init(void) {} #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) static struct pxamci_platform_data vpac270_mci_platform_data = { .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .gpio_power = -1, .gpio_card_detect = GPIO53_VPAC270_SD_DETECT_N, .gpio_card_ro = GPIO52_VPAC270_SD_READONLY, .detect_delay_ms = 200, diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h index 7b1fc984abb6..d5a71abcbaea 100644 --- a/arch/arm/mach-u300/include/mach/gpio.h +++ b/arch/arm/mach-u300/include/mach/gpio.h @@ -273,6 +273,9 @@ extern void gpio_pullup(unsigned gpio, int value); extern int gpio_get_value(unsigned gpio); extern void gpio_set_value(unsigned gpio, int value); +#define gpio_get_value_cansleep gpio_get_value +#define gpio_set_value_cansleep gpio_set_value + /* wrappers to sleep-enable the previous two functions */ static inline unsigned gpio_to_irq(unsigned gpio) { diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 577df6cccb08..efb127022d42 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -227,7 +227,13 @@ static void ct_ca9x4_init(void) int i; #ifdef CONFIG_CACHE_L2X0 - l2x0_init(MMIO_P2V(CT_CA9X4_L2CC), 0x00000000, 0xfe0fffff); + void __iomem *l2x0_base = MMIO_P2V(CT_CA9X4_L2CC); + + /* set RAM latencies to 1 cycle for this core tile. */ + writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL); + writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL); + + l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff); #endif clkdev_add_table(lookups, ARRAY_SIZE(lookups)); diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index d073b64ae87e..724ba3bce72c 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -885,8 +885,23 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (ai_usermode & UM_SIGNAL) force_sig(SIGBUS, current); - else - set_cr(cr_no_alignment); + else { + /* + * We're about to disable the alignment trap and return to + * user space. But if an interrupt occurs before actually + * reaching user space, then the IRQ vector entry code will + * notice that we were still in kernel space and therefore + * the alignment trap won't be re-enabled in that case as it + * is presumed to be always on from kernel space. + * Let's prevent that race by disabling interrupts here (they + * are disabled on the way back to user space anyway in + * entry-common.S) and disable the alignment trap only if + * there is no work pending for this thread. + */ + raw_local_irq_disable(); + if (!(current_thread_info()->flags & _TIF_WORK_MASK)) + set_cr(cr_no_alignment); + } return 0; } diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 6e1c4f6a2b3f..6a3a2d0cd6db 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -15,6 +15,7 @@ #include <linux/nodemask.h> #include <linux/memblock.h> #include <linux/sort.h> +#include <linux/fs.h> #include <asm/cputype.h> #include <asm/sections.h> @@ -246,6 +247,9 @@ static struct mem_type mem_types[] = { .domain = DOMAIN_USER, }, [MT_MEMORY] = { + .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | + L_PTE_USER | L_PTE_EXEC, + .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE, .domain = DOMAIN_KERNEL, }, @@ -254,6 +258,9 @@ static struct mem_type mem_types[] = { .domain = DOMAIN_KERNEL, }, [MT_MEMORY_NONCACHED] = { + .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | + L_PTE_USER | L_PTE_EXEC | L_PTE_MT_BUFFERABLE, + .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE, .domain = DOMAIN_KERNEL, }, @@ -411,9 +418,12 @@ static void __init build_mem_type_table(void) * Enable CPU-specific coherency if supported. * (Only available on XSC3 at the moment.) */ - if (arch_is_coherent() && cpu_is_xsc3()) + if (arch_is_coherent() && cpu_is_xsc3()) { mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; - + mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED; + mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S; + mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED; + } /* * ARMv6 and above have extended page tables. */ @@ -438,7 +448,9 @@ static void __init build_mem_type_table(void) mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S; mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED; mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; + mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED; mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S; + mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED; #endif } @@ -475,6 +487,8 @@ static void __init build_mem_type_table(void) mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask; mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask; mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd; + mem_types[MT_MEMORY].prot_pte |= kern_pgprot; + mem_types[MT_MEMORY_NONCACHED].prot_sect |= ecc_mask; mem_types[MT_ROM].prot_sect |= cp->pmd; switch (cp->pmd) { @@ -498,6 +512,19 @@ static void __init build_mem_type_table(void) } } +#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE +pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, + unsigned long size, pgprot_t vma_prot) +{ + if (!pfn_valid(pfn)) + return pgprot_noncached(vma_prot); + else if (file->f_flags & O_SYNC) + return pgprot_writecombine(vma_prot); + return vma_prot; +} +EXPORT_SYMBOL(phys_mem_access_prot); +#endif + #define vectors_base() (vectors_high() ? 0xffff0000 : 0) static void __init *early_alloc(unsigned long sz) diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 6a8506d99ee9..7563ff0141bd 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -186,13 +186,14 @@ cpu_v7_name: * It is assumed that: * - cache type register is implemented */ -__v7_setup: +__v7_ca9mp_setup: #ifdef CONFIG_SMP mrc p15, 0, r0, c1, c0, 1 tst r0, #(1 << 6) @ SMP/nAMP mode enabled? orreq r0, r0, #(1 << 6) | (1 << 0) @ Enable SMP/nAMP mode and mcreq p15, 0, r0, c1, c0, 1 @ TLB ops broadcasting #endif +__v7_setup: adr r12, __v7_setup_stack @ the local stack stmia r12, {r0-r5, r7, r9, r11, lr} bl v7_flush_dcache_all @@ -201,11 +202,16 @@ __v7_setup: mrc p15, 0, r0, c0, c0, 0 @ read main ID register and r10, r0, #0xff000000 @ ARM? teq r10, #0x41000000 - bne 2f + bne 3f and r5, r0, #0x00f00000 @ variant and r6, r0, #0x0000000f @ revision - orr r0, r6, r5, lsr #20-4 @ combine variant and revision + orr r6, r6, r5, lsr #20-4 @ combine variant and revision + ubfx r0, r0, #4, #12 @ primary part number + /* Cortex-A8 Errata */ + ldr r10, =0x00000c08 @ Cortex-A8 primary part number + teq r0, r10 + bne 2f #ifdef CONFIG_ARM_ERRATA_430973 teq r5, #0x00100000 @ only present in r1p* mrceq p15, 0, r10, c1, c0, 1 @ read aux control register @@ -213,21 +219,42 @@ __v7_setup: mcreq p15, 0, r10, c1, c0, 1 @ write aux control register #endif #ifdef CONFIG_ARM_ERRATA_458693 - teq r0, #0x20 @ only present in r2p0 + teq r6, #0x20 @ only present in r2p0 mrceq p15, 0, r10, c1, c0, 1 @ read aux control register orreq r10, r10, #(1 << 5) @ set L1NEON to 1 orreq r10, r10, #(1 << 9) @ set PLDNOP to 1 mcreq p15, 0, r10, c1, c0, 1 @ write aux control register #endif #ifdef CONFIG_ARM_ERRATA_460075 - teq r0, #0x20 @ only present in r2p0 + teq r6, #0x20 @ only present in r2p0 mrceq p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register tsteq r10, #1 << 22 orreq r10, r10, #(1 << 22) @ set the Write Allocate disable bit mcreq p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register #endif + b 3f + + /* Cortex-A9 Errata */ +2: ldr r10, =0x00000c09 @ Cortex-A9 primary part number + teq r0, r10 + bne 3f +#ifdef CONFIG_ARM_ERRATA_742230 + cmp r6, #0x22 @ only present up to r2p2 + mrcle p15, 0, r10, c15, c0, 1 @ read diagnostic register + orrle r10, r10, #1 << 4 @ set bit #4 + mcrle p15, 0, r10, c15, c0, 1 @ write diagnostic register +#endif +#ifdef CONFIG_ARM_ERRATA_742231 + teq r6, #0x20 @ present in r2p0 + teqne r6, #0x21 @ present in r2p1 + teqne r6, #0x22 @ present in r2p2 + mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register + orreq r10, r10, #1 << 12 @ set bit #12 + orreq r10, r10, #1 << 22 @ set bit #22 + mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register +#endif -2: mov r10, #0 +3: mov r10, #0 #ifdef HARVARD_CACHE mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate #endif @@ -323,6 +350,29 @@ cpu_elf_name: .section ".proc.info.init", #alloc, #execinstr + .type __v7_ca9mp_proc_info, #object +__v7_ca9mp_proc_info: + .long 0x410fc090 @ Required ID value + .long 0xff0ffff0 @ Mask for ID + .long PMD_TYPE_SECT | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ | \ + PMD_FLAGS + .long PMD_TYPE_SECT | \ + PMD_SECT_XN | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __v7_ca9mp_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long cpu_v7_name + .long v7_processor_functions + .long v7wbi_tlb_fns + .long v6_user_fns + .long v7_cache_fns + .size __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info + /* * Match any ARMv7 processor core. */ diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c index ea3ca86c5283..aedf9c1d645e 100644 --- a/arch/arm/plat-nomadik/timer.c +++ b/arch/arm/plat-nomadik/timer.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-nomadik/timer.c + * linux/arch/arm/plat-nomadik/timer.c * * Copyright (C) 2008 STMicroelectronics * Copyright (C) 2010 Alessandro Rubini @@ -75,7 +75,7 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode, cr = readl(mtu_base + MTU_CR(1)); writel(0, mtu_base + MTU_LR(1)); writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1)); - writel(0x2, mtu_base + MTU_IMSC); + writel(1 << 1, mtu_base + MTU_IMSC); break; case CLOCK_EVT_MODE_SHUTDOWN: case CLOCK_EVT_MODE_UNUSED: @@ -131,25 +131,23 @@ void __init nmdk_timer_init(void) { unsigned long rate; struct clk *clk0; - struct clk *clk1; - u32 cr; + u32 cr = MTU_CRn_32BITS; clk0 = clk_get_sys("mtu0", NULL); BUG_ON(IS_ERR(clk0)); - clk1 = clk_get_sys("mtu1", NULL); - BUG_ON(IS_ERR(clk1)); - clk_enable(clk0); - clk_enable(clk1); /* - * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500: - * use a divide-by-16 counter if it's more than 16MHz + * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz + * for ux500. + * Use a divide-by-16 counter if the tick rate is more than 32MHz. + * At 32 MHz, the timer (with 32 bit counter) can be programmed + * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer + * with 16 gives too low timer resolution. */ - cr = MTU_CRn_32BITS;; rate = clk_get_rate(clk0); - if (rate > 16 << 20) { + if (rate > 32000000) { rate /= 16; cr |= MTU_CRn_PRESCALE_16; } else { @@ -170,15 +168,8 @@ void __init nmdk_timer_init(void) pr_err("timer: failed to initialize clock source %s\n", nmdk_clksrc.name); - /* Timer 1 is used for events, fix according to rate */ - cr = MTU_CRn_32BITS; - rate = clk_get_rate(clk1); - if (rate > 16 << 20) { - rate /= 16; - cr |= MTU_CRn_PRESCALE_16; - } else { - cr |= MTU_CRn_PRESCALE_1; - } + /* Timer 1 is used for events */ + clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE); writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */ diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 226b2e858d6c..10b3b4c63372 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -220,20 +220,7 @@ void __init omap_map_sram(void) if (omap_sram_size == 0) return; - if (cpu_is_omap24xx()) { - omap_sram_io_desc[0].virtual = OMAP2_SRAM_VA; - - base = OMAP2_SRAM_PA; - base = ROUND_DOWN(base, PAGE_SIZE); - omap_sram_io_desc[0].pfn = __phys_to_pfn(base); - } - if (cpu_is_omap34xx()) { - omap_sram_io_desc[0].virtual = OMAP3_SRAM_VA; - base = OMAP3_SRAM_PA; - base = ROUND_DOWN(base, PAGE_SIZE); - omap_sram_io_desc[0].pfn = __phys_to_pfn(base); - /* * SRAM must be marked as non-cached on OMAP3 since the * CORE DPLL M2 divider change code (in SRAM) runs with the @@ -244,13 +231,11 @@ void __init omap_map_sram(void) omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED; } - if (cpu_is_omap44xx()) { - omap_sram_io_desc[0].virtual = OMAP4_SRAM_VA; - base = OMAP4_SRAM_PA; - base = ROUND_DOWN(base, PAGE_SIZE); - omap_sram_io_desc[0].pfn = __phys_to_pfn(base); - } - omap_sram_io_desc[0].length = 1024 * 1024; /* Use section desc */ + omap_sram_io_desc[0].virtual = omap_sram_base; + base = omap_sram_start; + base = ROUND_DOWN(base, PAGE_SIZE); + omap_sram_io_desc[0].pfn = __phys_to_pfn(base); + omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE); iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc)); printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n", |