Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "The fixes for this week include one small patch that was years in the
  making and that finally fixes using all eight CPUs on exynos542x.

  The rest are lots of minor changes for sunxi, imx, exynos and shmobile

   - fixing the minimum voltage for Allwinner A20
   - thermal boot issue on SMDK5250.
   - invalid clock used for FIMD IOMMU.
   - audio on Renesas r8a7790/r8a7791
   - invalid clock used for FIMD IOMMU
   - LEDs on exynos5422-odroidxu3-common
   - usb pin control for imx-rex
   - imx53: fix PMIC interrupt level
   - a Makefile typo"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: Fix wrong clock binding for sysmmu_fimd1_1 on exynos5420
  ARM: dts: Fix bootup thermal issue on smdk5250
  ARM: shmobile: r8a7791 dtsi: Add CPG/MSTP Clock Domain for sound
  ARM: shmobile: r8a7790 dtsi: Add CPG/MSTP Clock Domain for sound
  arm-cci500: Don't enable PMU driver by default
  ARM: dts: fix usb pin control for imx-rex dts
  ARM: imx53: qsrb: fix PMIC interrupt level
  ARM: imx53: include IRQ dt-bindings header
  ARM: dts: add suspend opp to exynos4412
  ARM: dts: Fix LEDs on exynos5422-odroidxu3
  ARM: EXYNOS: reset Little cores when cpu is up
  ARM: dts: Fix Makefile target for sun4i-a10-itead-iteaduino-plus
  ARM: dts: sunxi: Raise minimum CPU voltage for sun7i-a20 to meet SoC specifications

13 files changed, 41 insertions, 8 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 233159d2eaab..bb8fa023d574 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -578,7 +578,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-hackberry.dtb \
 	sun4i-a10-hyundai-a7hd.dtb \
 	sun4i-a10-inet97fv2.dtb \
-	sun4i-a10-itead-iteaduino-plus.dts \
+	sun4i-a10-itead-iteaduino-plus.dtb \
 	sun4i-a10-jesurun-q5.dtb \
 	sun4i-a10-marsboard.dtb \
 	sun4i-a10-mini-xplus.dtb \
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index ca0e3c15977f..294cfe40388d 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -98,6 +98,7 @@
 			opp-hz = /bits/ 64 <800000000>;
 			opp-microvolt = <1000000>;
 			clock-latency-ns = <200000>;
+			opp-suspend;
 		};
 		opp07 {
 			opp-hz = /bits/ 64 <900000000>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 15aea760c1da..c625e71217aa 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -197,6 +197,7 @@
 				regulator-name = "P1.8V_LDO_OUT10";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 			};
 
 			ldo11_reg: LDO11 {
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index df9aee92ecf4..1b3d6c769a3c 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -1117,7 +1117,7 @@
 		interrupt-parent = <&combiner>;
 		interrupts = <3 0>;
 		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
+		clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>;
 		power-domains = <&disp_pd>;
 		#iommu-cells = <0>;
 	};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 79ffdfe712aa..3b43e57845ae 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -472,7 +472,6 @@
 	 */
 	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
 	pinctrl-names = "default";
-	samsung,pwm-outputs = <0>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts
index 66e47de5e826..96d7eede412e 100644
--- a/arch/arm/boot/dts/imx53-qsrb.dts
+++ b/arch/arm/boot/dts/imx53-qsrb.dts
@@ -36,7 +36,7 @@
 		pinctrl-0 = <&pinctrl_pmic>;
 		reg = <0x08>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <23 0x8>;
+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
 		regulators {
 			sw1_reg: sw1a {
 				regulator-name = "SW1";
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index c3e3ca9362fb..cd170376eaca 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/clock/imx5-clock.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	aliases {
diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
index 3373fd958e95..a50356243888 100644
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
@@ -35,7 +35,6 @@
 			compatible = "regulator-fixed";
 			reg = <1>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1>;
 			regulator-name = "usbh1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -47,7 +46,6 @@
 			compatible = "regulator-fixed";
 			reg = <2>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbotg>;
 			regulator-name = "usb_otg_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index a0b2a79cbfbd..4624d0f2a754 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1627,6 +1627,7 @@
 				"mix.0", "mix.1",
 				"dvc.0", "dvc.1",
 				"clk_a", "clk_b", "clk_c", "clk_i";
+		power-domains = <&cpg_clocks>;
 
 		status = "disabled";
 
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 831525dd39a6..1666c8a6b143 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1677,6 +1677,7 @@
 				"mix.0", "mix.1",
 				"dvc.0", "dvc.1",
 				"clk_a", "clk_b", "clk_c", "clk_i";
+		power-domains = <&cpg_clocks>;
 
 		status = "disabled";
 
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 2bebaa286f9a..391230c3dc93 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -107,7 +107,7 @@
 				720000	1200000
 				528000	1100000
 				312000	1000000
-				144000	900000
+				144000	1000000
 				>;
 			#cooling-cells = <2>;
 			cooling-min-level = <0>;
diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
index 9bdf54795f05..56978199c479 100644
--- a/arch/arm/mach-exynos/mcpm-exynos.c
+++ b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -20,6 +20,7 @@
 #include <asm/cputype.h>
 #include <asm/cp15.h>
 #include <asm/mcpm.h>
+#include <asm/smp_plat.h>
 
 #include "regs-pmu.h"
 #include "common.h"
@@ -70,7 +71,31 @@ static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster)
 		cluster >= EXYNOS5420_NR_CLUSTERS)
 		return -EINVAL;
 
-	exynos_cpu_power_up(cpunr);
+	if (!exynos_cpu_power_state(cpunr)) {
+		exynos_cpu_power_up(cpunr);
+
+		/*
+		 * This assumes the cluster number of the big cores(Cortex A15)
+		 * is 0 and the Little cores(Cortex A7) is 1.
+		 * When the system was booted from the Little core,
+		 * they should be reset during power up cpu.
+		 */
+		if (cluster &&
+		    cluster == MPIDR_AFFINITY_LEVEL(cpu_logical_map(0), 1)) {
+			/*
+			 * Before we reset the Little cores, we should wait
+			 * the SPARE2 register is set to 1 because the init
+			 * codes of the iROM will set the register after
+			 * initialization.
+			 */
+			while (!pmu_raw_readl(S5P_PMU_SPARE2))
+				udelay(10);
+
+			pmu_raw_writel(EXYNOS5420_KFC_CORE_RESET(cpu),
+					EXYNOS_SWRESET);
+		}
+	}
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h
index b7614333d296..fba9068ed260 100644
--- a/arch/arm/mach-exynos/regs-pmu.h
+++ b/arch/arm/mach-exynos/regs-pmu.h
@@ -513,6 +513,12 @@ static inline unsigned int exynos_pmu_cpunr(unsigned int mpidr)
 #define SPREAD_ENABLE						0xF
 #define SPREAD_USE_STANDWFI					0xF
 
+#define EXYNOS5420_KFC_CORE_RESET0				BIT(8)
+#define EXYNOS5420_KFC_ETM_RESET0				BIT(20)
+
+#define EXYNOS5420_KFC_CORE_RESET(_nr)				\
+	((EXYNOS5420_KFC_CORE_RESET0 | EXYNOS5420_KFC_ETM_RESET0) << (_nr))
+
 #define EXYNOS5420_BB_CON1					0x0784
 #define EXYNOS5420_BB_SEL_EN					BIT(31)
 #define EXYNOS5420_BB_PMOS_EN					BIT(7)