Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - improve dma-debug scalability (Eric Dumazet)

 - tiny dma-debug cleanup (Dan Carpenter)

 - check for vmap memory in dma_map_single (Kees Cook)

 - check for dma_addr_t overflows in dma-direct when using DMA offsets
   (Nicolas Saenz Julienne)

 - switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas
   Saenz Julienne)

 - fix arm-nommu dma-ranges handling (Vladimir Murzin)

 - use __initdata in CMA (Shyam Saini)

 - replace the bus dma mask with a limit (Nicolas Saenz Julienne)

 - merge the remapping helpers into the main dma-direct flow (me)

 - switch xtensa to the generic dma remap handling (me)

 - various cleanups around dma_capable (me)

 - remove unused dev arguments to various dma-noncoherent helpers (me)

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux:

* tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits)
  dma-mapping: treat dev->bus_dma_mask as a DMA limit
  dma-direct: exclude dma_direct_map_resource from the min_low_pfn check
  dma-direct: don't check swiotlb=force in dma_direct_map_resource
  dma-debug: clean up put_hash_bucket()
  powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys
  dma-direct: avoid a forward declaration for phys_to_dma
  dma-direct: unify the dma_capable definitions
  dma-mapping: drop the dev argument to arch_sync_dma_for_*
  x86/PCI: sta2x11: use default DMA address translation
  dma-direct: check for overflows on 32 bit DMA addresses
  dma-debug: increase HASH_SIZE
  dma-debug: reorder struct dma_debug_entry fields
  xtensa: use the generic uncached segment support
  dma-mapping: merge the generic remapping helpers into dma-direct
  dma-direct: provide mmap and get_sgtable method overrides
  dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages
  dma-direct: remove __dma_direct_free_pages
  usb: core: Remove redundant vmap checks
  kernel: dma-contiguous: mark CMA parameters __initdata/__initconst
  dma-debug: add a schedule point in debug_dma_dump_mappings()
  ...

1 files changed, 26 insertions, 109 deletions

diff --git a/arch/x86/pci/sta2x11-fixup.c b/arch/x86/pci/sta2x11-fixup.c
index 6269a175385d..c313d784efab 100644
--- a/arch/x86/pci/sta2x11-fixup.c
+++ b/arch/x86/pci/sta2x11-fixup.c
@@ -30,7 +30,6 @@ struct sta2x11_ahb_regs { /* saved during suspend */
 };
 
 struct sta2x11_mapping {
-	u32 amba_base;
 	int is_suspended;
 	struct sta2x11_ahb_regs regs[STA2X11_NR_FUNCS];
 };
@@ -92,18 +91,6 @@ static int sta2x11_pdev_to_ep(struct pci_dev *pdev)
 	return pdev->bus->number - instance->bus0;
 }
 
-static struct sta2x11_mapping *sta2x11_pdev_to_mapping(struct pci_dev *pdev)
-{
-	struct sta2x11_instance *instance;
-	int ep;
-
-	instance = sta2x11_pdev_to_instance(pdev);
-	if (!instance)
-		return NULL;
-	ep = sta2x11_pdev_to_ep(pdev);
-	return instance->map + ep;
-}
-
 /* This is exported, as some devices need to access the MFD registers */
 struct sta2x11_instance *sta2x11_get_instance(struct pci_dev *pdev)
 {
@@ -111,39 +98,6 @@ struct sta2x11_instance *sta2x11_get_instance(struct pci_dev *pdev)
 }
 EXPORT_SYMBOL(sta2x11_get_instance);
 
-
-/**
- * p2a - Translate physical address to STA2x11 AMBA address,
- *       used for DMA transfers to STA2x11
- * @p: Physical address
- * @pdev: PCI device (must be hosted within the connext)
- */
-static dma_addr_t p2a(dma_addr_t p, struct pci_dev *pdev)
-{
-	struct sta2x11_mapping *map;
-	dma_addr_t a;
-
-	map = sta2x11_pdev_to_mapping(pdev);
-	a = p + map->amba_base;
-	return a;
-}
-
-/**
- * a2p - Translate STA2x11 AMBA address to physical address
- *       used for DMA transfers from STA2x11
- * @a: STA2x11 AMBA address
- * @pdev: PCI device (must be hosted within the connext)
- */
-static dma_addr_t a2p(dma_addr_t a, struct pci_dev *pdev)
-{
-	struct sta2x11_mapping *map;
-	dma_addr_t p;
-
-	map = sta2x11_pdev_to_mapping(pdev);
-	p = a - map->amba_base;
-	return p;
-}
-
 /* At setup time, we use our own ops if the device is a ConneXt one */
 static void sta2x11_setup_pdev(struct pci_dev *pdev)
 {
@@ -151,9 +105,6 @@ static void sta2x11_setup_pdev(struct pci_dev *pdev)
 
 	if (!instance) /* either a sta2x11 bridge or another ST device */
 		return;
-	pci_set_consistent_dma_mask(pdev, STA2X11_AMBA_SIZE - 1);
-	pci_set_dma_mask(pdev, STA2X11_AMBA_SIZE - 1);
-	pdev->dev.archdata.is_sta2x11 = true;
 
 	/* We must enable all devices as master, for audio DMA to work */
 	pci_set_master(pdev);
@@ -161,61 +112,6 @@ static void sta2x11_setup_pdev(struct pci_dev *pdev)
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, sta2x11_setup_pdev);
 
 /*
- * The following three functions are exported (used in swiotlb: FIXME)
- */
-/**
- * dma_capable - Check if device can manage DMA transfers (FIXME: kill it)
- * @dev: device for a PCI device
- * @addr: DMA address
- * @size: DMA size
- */
-bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
-{
-	struct sta2x11_mapping *map;
-
-	if (!dev->archdata.is_sta2x11) {
-		if (!dev->dma_mask)
-			return false;
-		return addr + size - 1 <= *dev->dma_mask;
-	}
-
-	map = sta2x11_pdev_to_mapping(to_pci_dev(dev));
-
-	if (!map || (addr < map->amba_base))
-		return false;
-	if (addr + size >= map->amba_base + STA2X11_AMBA_SIZE) {
-		return false;
-	}
-
-	return true;
-}
-
-/**
- * __phys_to_dma - Return the DMA AMBA address used for this STA2x11 device
- * @dev: device for a PCI device
- * @paddr: Physical address
- */
-dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
-{
-	if (!dev->archdata.is_sta2x11)
-		return paddr;
-	return p2a(paddr, to_pci_dev(dev));
-}
-
-/**
- * dma_to_phys - Return the physical address used for this STA2x11 DMA address
- * @dev: device for a PCI device
- * @daddr: STA2x11 AMBA DMA address
- */
-phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr)
-{
-	if (!dev->archdata.is_sta2x11)
-		return daddr;
-	return a2p(daddr, to_pci_dev(dev));
-}
-
-
-/*
  * At boot we must set up the mappings for the pcie-to-amba bridge.
  * It involves device access, and the same happens at suspend/resume time
  */
@@ -234,12 +130,22 @@ phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr)
 /* At probe time, enable mapping for each endpoint, using the pdev */
 static void sta2x11_map_ep(struct pci_dev *pdev)
 {
-	struct sta2x11_mapping *map = sta2x11_pdev_to_mapping(pdev);
+	struct sta2x11_instance *instance = sta2x11_pdev_to_instance(pdev);
+	struct device *dev = &pdev->dev;
+	u32 amba_base, max_amba_addr;
 	int i;
 
-	if (!map)
+	if (!instance)
 		return;
-	pci_read_config_dword(pdev, AHB_BASE(0), &map->amba_base);
+
+	pci_read_config_dword(pdev, AHB_BASE(0), &amba_base);
+	max_amba_addr = amba_base + STA2X11_AMBA_SIZE - 1;
+
+	dev->dma_pfn_offset = PFN_DOWN(-amba_base);
+
+	dev->bus_dma_limit = max_amba_addr;
+	pci_set_consistent_dma_mask(pdev, max_amba_addr);
+	pci_set_dma_mask(pdev, max_amba_addr);
 
 	/* Configure AHB mapping */
 	pci_write_config_dword(pdev, AHB_PEXLBASE(0), 0);
@@ -253,13 +159,24 @@ static void sta2x11_map_ep(struct pci_dev *pdev)
 
 	dev_info(&pdev->dev,
 		 "sta2x11: Map EP %i: AMBA address %#8x-%#8x\n",
-		 sta2x11_pdev_to_ep(pdev),  map->amba_base,
-		 map->amba_base + STA2X11_AMBA_SIZE - 1);
+		 sta2x11_pdev_to_ep(pdev), amba_base, max_amba_addr);
 }
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, sta2x11_map_ep);
 
 #ifdef CONFIG_PM /* Some register values must be saved and restored */
 
+static struct sta2x11_mapping *sta2x11_pdev_to_mapping(struct pci_dev *pdev)
+{
+	struct sta2x11_instance *instance;
+	int ep;
+
+	instance = sta2x11_pdev_to_instance(pdev);
+	if (!instance)
+		return NULL;
+	ep = sta2x11_pdev_to_ep(pdev);
+	return instance->map + ep;
+}
+
 static void suspend_mapping(struct pci_dev *pdev)
 {
 	struct sta2x11_mapping *map = sta2x11_pdev_to_mapping(pdev);