sh: mach-sdk7786: FPGA updates.

This does a bit of refactoring of the FPGA management code. The primary
FPGA initialization is moved out to its own file in preparation for
implementing some of the more complex capabilities, a complete set of
register definitions is provided, and all of the existing users in the
board code are moved over to use the new interface instead of setting up
overlapping mappings. This also corrects the FPGA size, which previously
was chomped off at the SDIF control register.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

3 files changed, 47 insertions, 70 deletions

diff --git a/arch/sh/boards/mach-sdk7786/Makefile b/arch/sh/boards/mach-sdk7786/Makefile
index f663768429f0..50c8065deaa0 100644
--- a/arch/sh/boards/mach-sdk7786/Makefile
+++ b/arch/sh/boards/mach-sdk7786/Makefile
@@ -1 +1 @@
-obj-y	:= setup.o
+obj-y	:= setup.o fpga.o
diff --git a/arch/sh/boards/mach-sdk7786/fpga.c b/arch/sh/boards/mach-sdk7786/fpga.c
new file mode 100644
index 000000000000..99f903c8b238
--- /dev/null
+++ b/arch/sh/boards/mach-sdk7786/fpga.c
@@ -0,0 +1,37 @@
+/*
+ * SDK7786 FPGA Support.
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/bcd.h>
+#include <mach/fpga.h>
+
+#define FPGA_REGS_BASE	0x07fff800
+#define FPGA_REGS_SIZE	0x490
+
+void __iomem *sdk7786_fpga_base;
+
+void __init sdk7786_fpga_init(void)
+{
+	u16 version, date;
+
+	sdk7786_fpga_base = ioremap_nocache(FPGA_REGS_BASE, FPGA_REGS_SIZE);
+	if (unlikely(!sdk7786_fpga_base)) {
+		panic("FPGA remapping failed.\n");
+		return;
+	}
+
+	version = fpga_read_reg(FPGAVR);
+	date = fpga_read_reg(FPGADR);
+
+	pr_info("\tFPGA version:\t%d.%d (built on %d/%d/%d)\n",
+		bcd2bin(version >> 8) & 0xf, bcd2bin(version & 0xf),
+		((date >> 12) & 0xf) + 2000,
+		(date >> 8) & 0xf, bcd2bin(date & 0xff));
+}
diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c
index 0e4b1c39742c..8dbbdea9c983 100644
--- a/arch/sh/boards/mach-sdk7786/setup.c
+++ b/arch/sh/boards/mach-sdk7786/setup.c
@@ -18,6 +18,7 @@
 #include <asm/machvec.h>
 #include <asm/heartbeat.h>
 #include <asm/sizes.h>
+#include <mach/fpga.h>
 
 static struct resource heartbeat_resource = {
 	.start		= 0x07fff8b0,
@@ -103,27 +104,17 @@ static struct platform_device *sh7786_devices[] __initdata = {
 	&smbus_pcie_device,
 };
 
-#define SBCR_REGS_BASE	0x07fff990
-
-#define SCBR_I2CMEN	(1 << 0)	/* FPGA I2C master enable */
-#define SCBR_I2CCEN	(1 << 1)	/* CPU I2C master enable */
-
 static int sdk7786_i2c_setup(void)
 {
-	void __iomem *sbcr;
 	unsigned int tmp;
 
-	sbcr = ioremap_nocache(SBCR_REGS_BASE, SZ_16);
-
 	/*
 	 * Hand over I2C control to the FPGA.
 	 */
-	tmp = ioread16(sbcr);
+	tmp = fpga_read_reg(SBCR);
 	tmp &= ~SCBR_I2CCEN;
 	tmp |= SCBR_I2CMEN;
-	iowrite16(tmp, sbcr);
-
-	iounmap(sbcr);
+	fpga_write_reg(tmp, SBCR);
 
 	return i2c_register_board_info(0, sdk7786_i2c_devices,
 				       ARRAY_SIZE(sdk7786_i2c_devices));
@@ -141,43 +132,6 @@ static int __init sdk7786_devices_setup(void)
 }
 __initcall(sdk7786_devices_setup);
 
-#define FPGA_REGS_BASE	0x07fff800
-#define FPGA_REGS_SIZE	1152
-
-#define INTASR		0x010
-#define INTAMR		0x020
-#define INTBSR		0x090
-#define INTBMR		0x0a0
-#define INTMSR		0x130
-
-#define IASELR1		0x210
-#define IASELR2		0x220
-#define IASELR3		0x230
-#define IASELR4		0x240
-#define IASELR5		0x250
-#define IASELR6		0x260
-#define IASELR7		0x270
-#define IASELR8		0x280
-#define IASELR9		0x290
-#define IASELR10	0x2a0
-#define IASELR11	0x2b0
-#define IASELR12	0x2c0
-#define IASELR13	0x2d0
-#define IASELR14	0x2e0
-#define IASELR15	0x2f0
-
-static void __iomem *fpga_regs;
-
-static u16 fpga_read_reg(unsigned int reg)
-{
-	return __raw_readw(fpga_regs + reg);
-}
-
-static void fpga_write_reg(u16 val, unsigned int reg)
-{
-	__raw_writew(val, fpga_regs + reg);
-}
-
 enum {
 	ATA_IRQ_BIT		= 1,
 	SPI_BUSY_BIT		= 2,
@@ -197,12 +151,6 @@ static void __init init_sdk7786_IRQ(void)
 {
 	unsigned int tmp;
 
-	fpga_regs = ioremap_nocache(FPGA_REGS_BASE, FPGA_REGS_SIZE);
-	if (!fpga_regs) {
-		printk(KERN_ERR "Couldn't map FPGA registers\n");
-		return;
-	}
-
 	/* Enable priority encoding for all IRLs */
 	fpga_write_reg(fpga_read_reg(INTMSR) | 0x0303, INTMSR);
 
@@ -219,21 +167,9 @@ static void __init init_sdk7786_IRQ(void)
 	plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK);
 }
 
-#define MODSWR_REGS	0x07fff830
-
 static int sdk7786_mode_pins(void)
 {
-	void __iomem *modswr;
-	int pin_states;
-
-	modswr = ioremap_nocache(MODSWR_REGS, SZ_16);
-	if (!modswr)
-		return -ENXIO;
-
-	pin_states = ioread16(modswr);
-	iounmap(modswr);
-
-	return pin_states;
+	return fpga_read_reg(MODSWR);
 }
 
 static int sdk7786_clk_init(void)
@@ -260,7 +196,11 @@ static int sdk7786_clk_init(void)
 /* Initialize the board */
 static void __init sdk7786_setup(char **cmdline_p)
 {
-	printk(KERN_INFO "Renesas Technology Corp. SDK7786 support.\n");
+	pr_info("Renesas Technology Europe SDK7786 support:\n");
+
+	sdk7786_fpga_init();
+
+	pr_info("\tPCB revision:\t%d\n", fpga_read_reg(PCBRR) & 0xf);
 }
 
 /*