MIPS: Whitespace cleanup.

Having received another series of whitespace patches I decided to do this
once and for all rather than dealing with this kind of patches trickling
in forever.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

4 files changed, 130 insertions, 130 deletions

diff --git a/arch/mips/loongson/lemote-2f/ec_kb3310b.h b/arch/mips/loongson/lemote-2f/ec_kb3310b.h
index 1595a21b315b..5a3f1860d4d2 100644
--- a/arch/mips/loongson/lemote-2f/ec_kb3310b.h
+++ b/arch/mips/loongson/lemote-2f/ec_kb3310b.h
@@ -30,141 +30,141 @@ extern sci_handler yeeloong_report_lid_status;
  * 2, fill the PORT_LOW as EC register low part.
  * 3, fill the PORT_DATA as EC register write data or get the data from it.
  */
-#define	EC_IO_PORT_HIGH	0x0381
-#define	EC_IO_PORT_LOW	0x0382
-#define	EC_IO_PORT_DATA	0x0383
+#define EC_IO_PORT_HIGH 0x0381
+#define EC_IO_PORT_LOW	0x0382
+#define EC_IO_PORT_DATA 0x0383
 
 /*
  * EC delay time is 500us for register and status access
  */
-#define	EC_REG_DELAY	500	/* unit : us */
-#define	EC_CMD_TIMEOUT	0x1000
+#define EC_REG_DELAY	500	/* unit : us */
+#define EC_CMD_TIMEOUT	0x1000
 
 /*
  * EC access port for SCI communication
  */
-#define	EC_CMD_PORT		0x66
-#define	EC_STS_PORT		0x66
-#define	EC_DAT_PORT		0x62
-#define	CMD_INIT_IDLE_MODE	0xdd
-#define	CMD_EXIT_IDLE_MODE	0xdf
-#define	CMD_INIT_RESET_MODE	0xd8
-#define	CMD_REBOOT_SYSTEM	0x8c
-#define	CMD_GET_EVENT_NUM	0x84
-#define	CMD_PROGRAM_PIECE	0xda
+#define EC_CMD_PORT		0x66
+#define EC_STS_PORT		0x66
+#define EC_DAT_PORT		0x62
+#define CMD_INIT_IDLE_MODE	0xdd
+#define CMD_EXIT_IDLE_MODE	0xdf
+#define CMD_INIT_RESET_MODE	0xd8
+#define CMD_REBOOT_SYSTEM	0x8c
+#define CMD_GET_EVENT_NUM	0x84
+#define CMD_PROGRAM_PIECE	0xda
 
 /* temperature & fan registers */
-#define	REG_TEMPERATURE_VALUE	0xF458
-#define	REG_FAN_AUTO_MAN_SWITCH 0xF459
-#define	BIT_FAN_AUTO		0
-#define	BIT_FAN_MANUAL		1
-#define	REG_FAN_CONTROL		0xF4D2
-#define	BIT_FAN_CONTROL_ON	(1 << 0)
-#define	BIT_FAN_CONTROL_OFF	(0 << 0)
-#define	REG_FAN_STATUS		0xF4DA
-#define	BIT_FAN_STATUS_ON	(1 << 0)
-#define	BIT_FAN_STATUS_OFF	(0 << 0)
-#define	REG_FAN_SPEED_HIGH	0xFE22
-#define	REG_FAN_SPEED_LOW	0xFE23
-#define	REG_FAN_SPEED_LEVEL	0xF4CC
+#define REG_TEMPERATURE_VALUE	0xF458
+#define REG_FAN_AUTO_MAN_SWITCH 0xF459
+#define BIT_FAN_AUTO		0
+#define BIT_FAN_MANUAL		1
+#define REG_FAN_CONTROL		0xF4D2
+#define BIT_FAN_CONTROL_ON	(1 << 0)
+#define BIT_FAN_CONTROL_OFF	(0 << 0)
+#define REG_FAN_STATUS		0xF4DA
+#define BIT_FAN_STATUS_ON	(1 << 0)
+#define BIT_FAN_STATUS_OFF	(0 << 0)
+#define REG_FAN_SPEED_HIGH	0xFE22
+#define REG_FAN_SPEED_LOW	0xFE23
+#define REG_FAN_SPEED_LEVEL	0xF4CC
 /* fan speed divider */
-#define	FAN_SPEED_DIVIDER	480000	/* (60*1000*1000/62.5/2)*/
+#define FAN_SPEED_DIVIDER	480000	/* (60*1000*1000/62.5/2)*/
 
 /* battery registers */
-#define	REG_BAT_DESIGN_CAP_HIGH		0xF77D
-#define	REG_BAT_DESIGN_CAP_LOW		0xF77E
-#define	REG_BAT_FULLCHG_CAP_HIGH	0xF780
-#define	REG_BAT_FULLCHG_CAP_LOW		0xF781
-#define	REG_BAT_DESIGN_VOL_HIGH		0xF782
-#define	REG_BAT_DESIGN_VOL_LOW		0xF783
-#define	REG_BAT_CURRENT_HIGH		0xF784
-#define	REG_BAT_CURRENT_LOW		0xF785
-#define	REG_BAT_VOLTAGE_HIGH		0xF786
-#define	REG_BAT_VOLTAGE_LOW		0xF787
-#define	REG_BAT_TEMPERATURE_HIGH	0xF788
-#define	REG_BAT_TEMPERATURE_LOW		0xF789
-#define	REG_BAT_RELATIVE_CAP_HIGH	0xF492
-#define	REG_BAT_RELATIVE_CAP_LOW	0xF493
-#define	REG_BAT_VENDOR			0xF4C4
-#define	FLAG_BAT_VENDOR_SANYO		0x01
-#define	FLAG_BAT_VENDOR_SIMPLO		0x02
-#define	REG_BAT_CELL_COUNT		0xF4C6
-#define	FLAG_BAT_CELL_3S1P		0x03
-#define	FLAG_BAT_CELL_3S2P		0x06
-#define	REG_BAT_CHARGE			0xF4A2
-#define	FLAG_BAT_CHARGE_DISCHARGE	0x01
-#define	FLAG_BAT_CHARGE_CHARGE		0x02
-#define	FLAG_BAT_CHARGE_ACPOWER		0x00
-#define	REG_BAT_STATUS			0xF4B0
-#define	BIT_BAT_STATUS_LOW		(1 << 5)
-#define	BIT_BAT_STATUS_DESTROY		(1 << 2)
-#define	BIT_BAT_STATUS_FULL		(1 << 1)
-#define	BIT_BAT_STATUS_IN		(1 << 0)
-#define	REG_BAT_CHARGE_STATUS		0xF4B1
-#define	BIT_BAT_CHARGE_STATUS_OVERTEMP	(1 << 2)
-#define	BIT_BAT_CHARGE_STATUS_PRECHG	(1 << 1)
-#define	REG_BAT_STATE			0xF482
-#define	BIT_BAT_STATE_CHARGING		(1 << 1)
-#define	BIT_BAT_STATE_DISCHARGING	(1 << 0)
-#define	REG_BAT_POWER			0xF440
-#define	BIT_BAT_POWER_S3		(1 << 2)
-#define	BIT_BAT_POWER_ON		(1 << 1)
-#define	BIT_BAT_POWER_ACIN		(1 << 0)
+#define REG_BAT_DESIGN_CAP_HIGH		0xF77D
+#define REG_BAT_DESIGN_CAP_LOW		0xF77E
+#define REG_BAT_FULLCHG_CAP_HIGH	0xF780
+#define REG_BAT_FULLCHG_CAP_LOW		0xF781
+#define REG_BAT_DESIGN_VOL_HIGH		0xF782
+#define REG_BAT_DESIGN_VOL_LOW		0xF783
+#define REG_BAT_CURRENT_HIGH		0xF784
+#define REG_BAT_CURRENT_LOW		0xF785
+#define REG_BAT_VOLTAGE_HIGH		0xF786
+#define REG_BAT_VOLTAGE_LOW		0xF787
+#define REG_BAT_TEMPERATURE_HIGH	0xF788
+#define REG_BAT_TEMPERATURE_LOW		0xF789
+#define REG_BAT_RELATIVE_CAP_HIGH	0xF492
+#define REG_BAT_RELATIVE_CAP_LOW	0xF493
+#define REG_BAT_VENDOR			0xF4C4
+#define FLAG_BAT_VENDOR_SANYO		0x01
+#define FLAG_BAT_VENDOR_SIMPLO		0x02
+#define REG_BAT_CELL_COUNT		0xF4C6
+#define FLAG_BAT_CELL_3S1P		0x03
+#define FLAG_BAT_CELL_3S2P		0x06
+#define REG_BAT_CHARGE			0xF4A2
+#define FLAG_BAT_CHARGE_DISCHARGE	0x01
+#define FLAG_BAT_CHARGE_CHARGE		0x02
+#define FLAG_BAT_CHARGE_ACPOWER		0x00
+#define REG_BAT_STATUS			0xF4B0
+#define BIT_BAT_STATUS_LOW		(1 << 5)
+#define BIT_BAT_STATUS_DESTROY		(1 << 2)
+#define BIT_BAT_STATUS_FULL		(1 << 1)
+#define BIT_BAT_STATUS_IN		(1 << 0)
+#define REG_BAT_CHARGE_STATUS		0xF4B1
+#define BIT_BAT_CHARGE_STATUS_OVERTEMP	(1 << 2)
+#define BIT_BAT_CHARGE_STATUS_PRECHG	(1 << 1)
+#define REG_BAT_STATE			0xF482
+#define BIT_BAT_STATE_CHARGING		(1 << 1)
+#define BIT_BAT_STATE_DISCHARGING	(1 << 0)
+#define REG_BAT_POWER			0xF440
+#define BIT_BAT_POWER_S3		(1 << 2)
+#define BIT_BAT_POWER_ON		(1 << 1)
+#define BIT_BAT_POWER_ACIN		(1 << 0)
 
 /* other registers */
 /* Audio: rd/wr */
-#define	REG_AUDIO_VOLUME	0xF46C
-#define	REG_AUDIO_MUTE		0xF4E7
-#define	REG_AUDIO_BEEP		0xF4D0
+#define REG_AUDIO_VOLUME	0xF46C
+#define REG_AUDIO_MUTE		0xF4E7
+#define REG_AUDIO_BEEP		0xF4D0
 /* USB port power or not: rd/wr */
-#define	REG_USB0_FLAG		0xF461
-#define	REG_USB1_FLAG		0xF462
-#define	REG_USB2_FLAG		0xF463
-#define	BIT_USB_FLAG_ON		1
-#define	BIT_USB_FLAG_OFF	0
+#define REG_USB0_FLAG		0xF461
+#define REG_USB1_FLAG		0xF462
+#define REG_USB2_FLAG		0xF463
+#define BIT_USB_FLAG_ON		1
+#define BIT_USB_FLAG_OFF	0
 /* LID */
-#define	REG_LID_DETECT		0xF4BD
-#define	BIT_LID_DETECT_ON	1
-#define	BIT_LID_DETECT_OFF	0
+#define REG_LID_DETECT		0xF4BD
+#define BIT_LID_DETECT_ON	1
+#define BIT_LID_DETECT_OFF	0
 /* CRT */
-#define	REG_CRT_DETECT		0xF4AD
-#define	BIT_CRT_DETECT_PLUG	1
-#define	BIT_CRT_DETECT_UNPLUG	0
+#define REG_CRT_DETECT		0xF4AD
+#define BIT_CRT_DETECT_PLUG	1
+#define BIT_CRT_DETECT_UNPLUG	0
 /* LCD backlight brightness adjust: 9 levels */
-#define	REG_DISPLAY_BRIGHTNESS	0xF4F5
+#define REG_DISPLAY_BRIGHTNESS	0xF4F5
 /* Black screen Status */
-#define	BIT_DISPLAY_LCD_ON	1
-#define	BIT_DISPLAY_LCD_OFF	0
+#define BIT_DISPLAY_LCD_ON	1
+#define BIT_DISPLAY_LCD_OFF	0
 /* LCD backlight control: off/restore */
-#define	REG_BACKLIGHT_CTRL	0xF7BD
-#define	BIT_BACKLIGHT_ON	1
-#define	BIT_BACKLIGHT_OFF	0
+#define REG_BACKLIGHT_CTRL	0xF7BD
+#define BIT_BACKLIGHT_ON	1
+#define BIT_BACKLIGHT_OFF	0
 /* Reset the machine auto-clear: rd/wr */
-#define	REG_RESET		0xF4EC
-#define	BIT_RESET_ON		1
+#define REG_RESET		0xF4EC
+#define BIT_RESET_ON		1
 /* Light the led: rd/wr */
-#define	REG_LED			0xF4C8
-#define	BIT_LED_RED_POWER	(1 << 0)
-#define	BIT_LED_ORANGE_POWER	(1 << 1)
-#define	BIT_LED_GREEN_CHARGE	(1 << 2)
-#define	BIT_LED_RED_CHARGE	(1 << 3)
-#define	BIT_LED_NUMLOCK		(1 << 4)
+#define REG_LED			0xF4C8
+#define BIT_LED_RED_POWER	(1 << 0)
+#define BIT_LED_ORANGE_POWER	(1 << 1)
+#define BIT_LED_GREEN_CHARGE	(1 << 2)
+#define BIT_LED_RED_CHARGE	(1 << 3)
+#define BIT_LED_NUMLOCK		(1 << 4)
 /* Test led mode, all led on/off */
-#define	REG_LED_TEST		0xF4C2
-#define	BIT_LED_TEST_IN		1
-#define	BIT_LED_TEST_OUT	0
+#define REG_LED_TEST		0xF4C2
+#define BIT_LED_TEST_IN		1
+#define BIT_LED_TEST_OUT	0
 /* Camera on/off */
-#define	REG_CAMERA_STATUS	0xF46A
-#define	BIT_CAMERA_STATUS_ON	1
-#define	BIT_CAMERA_STATUS_OFF	0
-#define	REG_CAMERA_CONTROL	0xF7B7
-#define	BIT_CAMERA_CONTROL_OFF	0
-#define	BIT_CAMERA_CONTROL_ON	1
+#define REG_CAMERA_STATUS	0xF46A
+#define BIT_CAMERA_STATUS_ON	1
+#define BIT_CAMERA_STATUS_OFF	0
+#define REG_CAMERA_CONTROL	0xF7B7
+#define BIT_CAMERA_CONTROL_OFF	0
+#define BIT_CAMERA_CONTROL_ON	1
 /* Wlan Status */
-#define	REG_WLAN		0xF4FA
-#define	BIT_WLAN_ON		1
-#define	BIT_WLAN_OFF		0
-#define	REG_DISPLAY_LCD		0xF79F
+#define REG_WLAN		0xF4FA
+#define BIT_WLAN_ON		1
+#define BIT_WLAN_OFF		0
+#define REG_DISPLAY_LCD		0xF79F
 
 /* SCI Event Number from EC */
 enum {
diff --git a/arch/mips/loongson/lemote-2f/irq.c b/arch/mips/loongson/lemote-2f/irq.c
index 14b081841b6b..6f8682e44483 100644
--- a/arch/mips/loongson/lemote-2f/irq.c
+++ b/arch/mips/loongson/lemote-2f/irq.c
@@ -2,9 +2,9 @@
  * Copyright (C) 2007 Lemote Inc.
  * Author: Fuxin Zhang, zhangfx@lemote.com
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
  *  option) any later version.
  */
 
@@ -18,10 +18,10 @@
 #include <loongson.h>
 #include <machine.h>
 
-#define LOONGSON_TIMER_IRQ	(MIPS_CPU_IRQ_BASE + 7)	/* cpu timer */
-#define LOONGSON_NORTH_BRIDGE_IRQ	(MIPS_CPU_IRQ_BASE + 6)	/* bonito */
-#define LOONGSON_UART_IRQ	(MIPS_CPU_IRQ_BASE + 3)	/* cpu serial port */
-#define LOONGSON_SOUTH_BRIDGE_IRQ	(MIPS_CPU_IRQ_BASE + 2)	/* i8259 */
+#define LOONGSON_TIMER_IRQ	(MIPS_CPU_IRQ_BASE + 7) /* cpu timer */
+#define LOONGSON_NORTH_BRIDGE_IRQ	(MIPS_CPU_IRQ_BASE + 6) /* bonito */
+#define LOONGSON_UART_IRQ	(MIPS_CPU_IRQ_BASE + 3) /* cpu serial port */
+#define LOONGSON_SOUTH_BRIDGE_IRQ	(MIPS_CPU_IRQ_BASE + 2) /* i8259 */
 
 #define LOONGSON_INT_BIT_INT0		(1 << 11)
 #define LOONGSON_INT_BIT_INT1		(1 << 12)
@@ -108,9 +108,9 @@ struct irqaction cascade_irqaction = {
 void __init mach_init_irq(void)
 {
 	/* init all controller
-	 *   0-15         ------> i8259 interrupt
-	 *   16-23        ------> mips cpu interrupt
-	 *   32-63        ------> bonito irq
+	 *   0-15	  ------> i8259 interrupt
+	 *   16-23	  ------> mips cpu interrupt
+	 *   32-63	  ------> bonito irq
 	 */
 
 	/* setup cs5536 as high level trigger */
diff --git a/arch/mips/loongson/lemote-2f/machtype.c b/arch/mips/loongson/lemote-2f/machtype.c
index e860a2705c27..b55e6eece5e0 100644
--- a/arch/mips/loongson/lemote-2f/machtype.c
+++ b/arch/mips/loongson/lemote-2f/machtype.c
@@ -2,8 +2,8 @@
  * Copyright (C) 2009 Lemote Inc.
  * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
@@ -22,11 +22,11 @@ void __init mach_prom_init_machtype(void)
 	 * machines, this will help the users a lot.
 	 *
 	 * If no "machtype=" passed, get machine type from "PMON_VER=".
-	 * 	PMON_VER=LM8089		Lemote 8.9'' netbook
-	 * 	         LM8101		Lemote 10.1'' netbook
-	 * 	(The above two netbooks have the same kernel support)
-	 *	         LM6XXX		Lemote FuLoong(2F) box series
-	 *	         LM9XXX		Lemote LynLoong PC series
+	 *	PMON_VER=LM8089		Lemote 8.9'' netbook
+	 *		 LM8101		Lemote 10.1'' netbook
+	 *	(The above two netbooks have the same kernel support)
+	 *		 LM6XXX		Lemote FuLoong(2F) box series
+	 *		 LM9XXX		Lemote LynLoong PC series
 	 */
 	if (strstr(arcs_cmdline, "PMON_VER=LM")) {
 		if (strstr(arcs_cmdline, "PMON_VER=LM8"))
diff --git a/arch/mips/loongson/lemote-2f/reset.c b/arch/mips/loongson/lemote-2f/reset.c
index 36020a07e180..90962a3a1731 100644
--- a/arch/mips/loongson/lemote-2f/reset.c
+++ b/arch/mips/loongson/lemote-2f/reset.c
@@ -5,8 +5,8 @@
  * Copyright (C) 2009 Lemote Inc.
  * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
@@ -90,9 +90,9 @@ void ml2f_reboot(void)
 #define EC_SHUTDOWN_IO_PORT_HIGH 0xff2d
 #define EC_SHUTDOWN_IO_PORT_LOW	 0xff2e
 #define EC_SHUTDOWN_IO_PORT_DATA 0xff2f
-#define REG_SHUTDOWN_HIGH        0xFC
-#define REG_SHUTDOWN_LOW         0x29
-#define BIT_SHUTDOWN_ON          (1 << 1)
+#define REG_SHUTDOWN_HIGH	 0xFC
+#define REG_SHUTDOWN_LOW	 0x29
+#define BIT_SHUTDOWN_ON		 (1 << 1)
 
 static void ml2f_shutdown(void)
 {