Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 508 insertions, 0 deletions

diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S
new file mode 100644
index 000000000000..afa8eae18ff6
--- /dev/null
+++ b/arch/mips/lib/memcpy.S
@@ -0,0 +1,508 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Unified implementation of memcpy, memmove and the __copy_user backend.
+ *
+ * Copyright (C) 1998, 99, 2000, 01, 2002 Ralf Baechle (ralf@gnu.org)
+ * Copyright (C) 1999, 2000, 01, 2002 Silicon Graphics, Inc.
+ * Copyright (C) 2002 Broadcom, Inc.
+ *   memcpy/copy_user author: Mark Vandevoorde
+ *
+ * Mnemonic names for arguments to memcpy/__copy_user
+ */
+#include <linux/config.h>
+#include <asm/asm.h>
+#include <asm/offset.h>
+#include <asm/regdef.h>
+
+#define dst a0
+#define src a1
+#define len a2
+
+/*
+ * Spec
+ *
+ * memcpy copies len bytes from src to dst and sets v0 to dst.
+ * It assumes that
+ *   - src and dst don't overlap
+ *   - src is readable
+ *   - dst is writable
+ * memcpy uses the standard calling convention
+ *
+ * __copy_user copies up to len bytes from src to dst and sets a2 (len) to
+ * the number of uncopied bytes due to an exception caused by a read or write.
+ * __copy_user assumes that src and dst don't overlap, and that the call is
+ * implementing one of the following:
+ *   copy_to_user
+ *     - src is readable  (no exceptions when reading src)
+ *   copy_from_user
+ *     - dst is writable  (no exceptions when writing dst)
+ * __copy_user uses a non-standard calling convention; see
+ * include/asm-mips/uaccess.h
+ *
+ * When an exception happens on a load, the handler must
+ # ensure that all of the destination buffer is overwritten to prevent
+ * leaking information to user mode programs.
+ */
+
+/*
+ * Implementation
+ */
+
+/*
+ * The exception handler for loads requires that:
+ *  1- AT contain the address of the byte just past the end of the source
+ *     of the copy,
+ *  2- src_entry <= src < AT, and
+ *  3- (dst - src) == (dst_entry - src_entry),
+ * The _entry suffix denotes values when __copy_user was called.
+ *
+ * (1) is set up up by uaccess.h and maintained by not writing AT in copy_user
+ * (2) is met by incrementing src by the number of bytes copied
+ * (3) is met by not doing loads between a pair of increments of dst and src
+ *
+ * The exception handlers for stores adjust len (if necessary) and return.
+ * These handlers do not need to overwrite any data.
+ *
+ * For __rmemcpy and memmove an exception is always a kernel bug, therefore
+ * they're not protected.
+ */
+
+#define EXC(inst_reg,addr,handler)		\
+9:	inst_reg, addr;				\
+	.section __ex_table,"a";		\
+	PTR	9b, handler;			\
+	.previous
+
+/*
+ * Only on the 64-bit kernel we can made use of 64-bit registers.
+ */
+#ifdef CONFIG_MIPS64
+#define USE_DOUBLE
+#endif
+
+#ifdef USE_DOUBLE
+
+#define LOAD   ld
+#define LOADL  ldl
+#define LOADR  ldr
+#define STOREL sdl
+#define STORER sdr
+#define STORE  sd
+#define ADD    daddu
+#define SUB    dsubu
+#define SRL    dsrl
+#define SRA    dsra
+#define SLL    dsll
+#define SLLV   dsllv
+#define SRLV   dsrlv
+#define NBYTES 8
+#define LOG_NBYTES 3
+
+/* 
+ * As we are sharing code base with the mips32 tree (which use the o32 ABI
+ * register definitions). We need to redefine the register definitions from
+ * the n64 ABI register naming to the o32 ABI register naming.
+ */
+#undef t0
+#undef t1
+#undef t2
+#undef t3
+#define t0	$8
+#define t1	$9
+#define t2	$10
+#define t3	$11
+#define t4	$12
+#define t5	$13
+#define t6	$14
+#define t7	$15
+	
+#else
+
+#define LOAD   lw
+#define LOADL  lwl
+#define LOADR  lwr
+#define STOREL swl
+#define STORER swr
+#define STORE  sw
+#define ADD    addu
+#define SUB    subu
+#define SRL    srl
+#define SLL    sll
+#define SRA    sra
+#define SLLV   sllv
+#define SRLV   srlv
+#define NBYTES 4
+#define LOG_NBYTES 2
+
+#endif /* USE_DOUBLE */
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define LDFIRST LOADR
+#define LDREST  LOADL
+#define STFIRST STORER
+#define STREST  STOREL
+#define SHIFT_DISCARD SLLV
+#else
+#define LDFIRST LOADL
+#define LDREST  LOADR
+#define STFIRST STOREL
+#define STREST  STORER
+#define SHIFT_DISCARD SRLV
+#endif
+
+#define FIRST(unit) ((unit)*NBYTES)
+#define REST(unit)  (FIRST(unit)+NBYTES-1)
+#define UNIT(unit)  FIRST(unit)
+
+#define ADDRMASK (NBYTES-1)
+
+	.text
+	.set	noreorder
+	.set	noat
+
+/*
+ * A combined memcpy/__copy_user
+ * __copy_user sets len to 0 for success; else to an upper bound of
+ * the number of uncopied bytes.
+ * memcpy sets v0 to dst.
+ */
+	.align	5
+LEAF(memcpy)					/* a0=dst a1=src a2=len */
+	move	v0, dst				/* return value */
+__memcpy:
+FEXPORT(__copy_user)
+	/*
+	 * Note: dst & src may be unaligned, len may be 0
+	 * Temps
+	 */
+#define rem t8
+
+	/*
+	 * The "issue break"s below are very approximate.
+	 * Issue delays for dcache fills will perturb the schedule, as will
+	 * load queue full replay traps, etc.
+	 *
+	 * If len < NBYTES use byte operations.
+	 */
+	PREF(	0, 0(src) )
+	PREF(	1, 0(dst) )
+	sltu	t2, len, NBYTES
+	and	t1, dst, ADDRMASK
+	PREF(	0, 1*32(src) )
+	PREF(	1, 1*32(dst) )
+	bnez	t2, copy_bytes_checklen
+	 and	t0, src, ADDRMASK
+	PREF(	0, 2*32(src) )
+	PREF(	1, 2*32(dst) )
+	bnez	t1, dst_unaligned
+	 nop
+	bnez	t0, src_unaligned_dst_aligned
+	/*
+	 * use delay slot for fall-through
+	 * src and dst are aligned; need to compute rem
+	 */
+both_aligned:
+	 SRL	t0, len, LOG_NBYTES+3    # +3 for 8 units/iter
+	beqz	t0, cleanup_both_aligned # len < 8*NBYTES
+	 and	rem, len, (8*NBYTES-1)	 # rem = len % (8*NBYTES)
+	PREF(	0, 3*32(src) )
+	PREF(	1, 3*32(dst) )
+	.align	4
+1:
+EXC(	LOAD	t0, UNIT(0)(src),	l_exc)
+EXC(	LOAD	t1, UNIT(1)(src),	l_exc_copy)
+EXC(	LOAD	t2, UNIT(2)(src),	l_exc_copy)
+EXC(	LOAD	t3, UNIT(3)(src),	l_exc_copy)
+	SUB	len, len, 8*NBYTES
+EXC(	LOAD	t4, UNIT(4)(src),	l_exc_copy)
+EXC(	LOAD	t7, UNIT(5)(src),	l_exc_copy)
+EXC(	STORE	t0, UNIT(0)(dst),	s_exc_p8u)
+EXC(	STORE	t1, UNIT(1)(dst),	s_exc_p7u)
+EXC(	LOAD	t0, UNIT(6)(src),	l_exc_copy)
+EXC(	LOAD	t1, UNIT(7)(src),	l_exc_copy)
+	ADD	src, src, 8*NBYTES
+	ADD	dst, dst, 8*NBYTES
+EXC(	STORE	t2, UNIT(-6)(dst),	s_exc_p6u)
+EXC(	STORE	t3, UNIT(-5)(dst),	s_exc_p5u)
+EXC(	STORE	t4, UNIT(-4)(dst),	s_exc_p4u)
+EXC(	STORE	t7, UNIT(-3)(dst),	s_exc_p3u)
+EXC(	STORE	t0, UNIT(-2)(dst),	s_exc_p2u)
+EXC(	STORE	t1, UNIT(-1)(dst),	s_exc_p1u)
+	PREF(	0, 8*32(src) )
+	PREF(	1, 8*32(dst) )
+	bne	len, rem, 1b
+	 nop
+
+	/*
+	 * len == rem == the number of bytes left to copy < 8*NBYTES
+	 */
+cleanup_both_aligned:
+	beqz	len, done
+	 sltu	t0, len, 4*NBYTES
+	bnez	t0, less_than_4units
+	 and	rem, len, (NBYTES-1)	# rem = len % NBYTES
+	/*
+	 * len >= 4*NBYTES
+	 */
+EXC(	LOAD	t0, UNIT(0)(src),	l_exc)
+EXC(	LOAD	t1, UNIT(1)(src),	l_exc_copy)
+EXC(	LOAD	t2, UNIT(2)(src),	l_exc_copy)
+EXC(	LOAD	t3, UNIT(3)(src),	l_exc_copy)
+	SUB	len, len, 4*NBYTES
+	ADD	src, src, 4*NBYTES
+EXC(	STORE	t0, UNIT(0)(dst),	s_exc_p4u)
+EXC(	STORE	t1, UNIT(1)(dst),	s_exc_p3u)
+EXC(	STORE	t2, UNIT(2)(dst),	s_exc_p2u)
+EXC(	STORE	t3, UNIT(3)(dst),	s_exc_p1u)
+	beqz	len, done
+	 ADD	dst, dst, 4*NBYTES
+less_than_4units:
+	/*
+	 * rem = len % NBYTES
+	 */
+	beq	rem, len, copy_bytes
+	 nop
+1:
+EXC(	LOAD	t0, 0(src),		l_exc)
+	ADD	src, src, NBYTES
+	SUB	len, len, NBYTES
+EXC(	STORE	t0, 0(dst),		s_exc_p1u)
+	bne	rem, len, 1b
+	 ADD	dst, dst, NBYTES
+
+	/*
+	 * src and dst are aligned, need to copy rem bytes (rem < NBYTES)
+	 * A loop would do only a byte at a time with possible branch
+	 * mispredicts.  Can't do an explicit LOAD dst,mask,or,STORE
+	 * because can't assume read-access to dst.  Instead, use
+	 * STREST dst, which doesn't require read access to dst.
+	 *
+	 * This code should perform better than a simple loop on modern,
+	 * wide-issue mips processors because the code has fewer branches and
+	 * more instruction-level parallelism.
+	 */
+#define bits t2
+	beqz	len, done
+	 ADD	t1, dst, len	# t1 is just past last byte of dst
+	li	bits, 8*NBYTES
+	SLL	rem, len, 3	# rem = number of bits to keep
+EXC(	LOAD	t0, 0(src),		l_exc)
+	SUB	bits, bits, rem	# bits = number of bits to discard
+	SHIFT_DISCARD t0, t0, bits
+EXC(	STREST	t0, -1(t1),		s_exc)
+	jr	ra
+	 move	len, zero
+dst_unaligned:
+	/*
+	 * dst is unaligned
+	 * t0 = src & ADDRMASK
+	 * t1 = dst & ADDRMASK; T1 > 0
+	 * len >= NBYTES
+	 *
+	 * Copy enough bytes to align dst
+	 * Set match = (src and dst have same alignment)
+	 */
+#define match rem
+EXC(	LDFIRST	t3, FIRST(0)(src),	l_exc)
+	ADD	t2, zero, NBYTES
+EXC(	LDREST	t3, REST(0)(src),	l_exc_copy)
+	SUB	t2, t2, t1	# t2 = number of bytes copied
+	xor	match, t0, t1
+EXC(	STFIRST t3, FIRST(0)(dst),	s_exc)
+	beq	len, t2, done
+	 SUB	len, len, t2
+	ADD	dst, dst, t2
+	beqz	match, both_aligned
+	 ADD	src, src, t2
+
+src_unaligned_dst_aligned:
+	SRL	t0, len, LOG_NBYTES+2    # +2 for 4 units/iter
+	PREF(	0, 3*32(src) )
+	beqz	t0, cleanup_src_unaligned
+	 and	rem, len, (4*NBYTES-1)   # rem = len % 4*NBYTES
+	PREF(	1, 3*32(dst) )
+1:
+/*
+ * Avoid consecutive LD*'s to the same register since some mips
+ * implementations can't issue them in the same cycle.
+ * It's OK to load FIRST(N+1) before REST(N) because the two addresses
+ * are to the same unit (unless src is aligned, but it's not).
+ */
+EXC(	LDFIRST	t0, FIRST(0)(src),	l_exc)
+EXC(	LDFIRST	t1, FIRST(1)(src),	l_exc_copy)
+	SUB     len, len, 4*NBYTES
+EXC(	LDREST	t0, REST(0)(src),	l_exc_copy)
+EXC(	LDREST	t1, REST(1)(src),	l_exc_copy)
+EXC(	LDFIRST	t2, FIRST(2)(src),	l_exc_copy)
+EXC(	LDFIRST	t3, FIRST(3)(src),	l_exc_copy)
+EXC(	LDREST	t2, REST(2)(src),	l_exc_copy)
+EXC(	LDREST	t3, REST(3)(src),	l_exc_copy)
+	PREF(	0, 9*32(src) )		# 0 is PREF_LOAD  (not streamed)
+	ADD	src, src, 4*NBYTES
+#ifdef CONFIG_CPU_SB1
+	nop				# improves slotting
+#endif
+EXC(	STORE	t0, UNIT(0)(dst),	s_exc_p4u)
+EXC(	STORE	t1, UNIT(1)(dst),	s_exc_p3u)
+EXC(	STORE	t2, UNIT(2)(dst),	s_exc_p2u)
+EXC(	STORE	t3, UNIT(3)(dst),	s_exc_p1u)
+	PREF(	1, 9*32(dst) )     	# 1 is PREF_STORE (not streamed)
+	bne	len, rem, 1b
+	 ADD	dst, dst, 4*NBYTES
+
+cleanup_src_unaligned:
+	beqz	len, done
+	 and	rem, len, NBYTES-1  # rem = len % NBYTES
+	beq	rem, len, copy_bytes
+	 nop
+1:
+EXC(	LDFIRST t0, FIRST(0)(src),	l_exc)
+EXC(	LDREST	t0, REST(0)(src),	l_exc_copy)
+	ADD	src, src, NBYTES
+	SUB	len, len, NBYTES
+EXC(	STORE	t0, 0(dst),		s_exc_p1u)
+	bne	len, rem, 1b
+	 ADD	dst, dst, NBYTES
+
+copy_bytes_checklen:
+	beqz	len, done
+	 nop
+copy_bytes:
+	/* 0 < len < NBYTES  */
+#define COPY_BYTE(N)			\
+EXC(	lb	t0, N(src), l_exc);	\
+	SUB	len, len, 1;		\
+	beqz	len, done;		\
+EXC(	 sb	t0, N(dst), s_exc_p1)
+
+	COPY_BYTE(0)
+	COPY_BYTE(1)
+#ifdef USE_DOUBLE
+	COPY_BYTE(2)
+	COPY_BYTE(3)
+	COPY_BYTE(4)
+	COPY_BYTE(5)
+#endif
+EXC(	lb	t0, NBYTES-2(src), l_exc)
+	SUB	len, len, 1
+	jr	ra
+EXC(	 sb	t0, NBYTES-2(dst), s_exc_p1)
+done:
+	jr	ra
+	 nop
+	END(memcpy)
+
+l_exc_copy:
+	/*
+	 * Copy bytes from src until faulting load address (or until a
+	 * lb faults)
+	 *
+	 * When reached by a faulting LDFIRST/LDREST, THREAD_BUADDR($28)
+	 * may be more than a byte beyond the last address.
+	 * Hence, the lb below may get an exception.
+	 *
+	 * Assumes src < THREAD_BUADDR($28)
+	 */
+	LOAD	t0, TI_TASK($28)
+	 nop
+	LOAD	t0, THREAD_BUADDR(t0)
+1:
+EXC(	lb	t1, 0(src),	l_exc)
+	ADD	src, src, 1
+	sb	t1, 0(dst)	# can't fault -- we're copy_from_user
+	bne	src, t0, 1b
+	 ADD	dst, dst, 1
+l_exc:
+	LOAD	t0, TI_TASK($28)
+	 nop
+	LOAD	t0, THREAD_BUADDR(t0)	# t0 is just past last good address
+	 nop
+	SUB	len, AT, t0		# len number of uncopied bytes
+	/*
+	 * Here's where we rely on src and dst being incremented in tandem,
+	 *   See (3) above.
+	 * dst += (fault addr - src) to put dst at first byte to clear
+	 */
+	ADD	dst, t0			# compute start address in a1
+	SUB	dst, src
+	/*
+	 * Clear len bytes starting at dst.  Can't call __bzero because it
+	 * might modify len.  An inefficient loop for these rare times...
+	 */
+	beqz	len, done
+	 SUB	src, len, 1
+1:	sb	zero, 0(dst)
+	ADD	dst, dst, 1
+	bnez	src, 1b
+	 SUB	src, src, 1
+	jr	ra
+	 nop
+
+
+#define SEXC(n)				\
+s_exc_p ## n ## u:			\
+	jr	ra;			\
+	 ADD	len, len, n*NBYTES
+
+SEXC(8)
+SEXC(7)
+SEXC(6)
+SEXC(5)
+SEXC(4)
+SEXC(3)
+SEXC(2)
+SEXC(1)
+
+s_exc_p1:
+	jr	ra
+	 ADD	len, len, 1
+s_exc:
+	jr	ra
+	 nop
+
+	.align	5
+LEAF(memmove)
+	ADD	t0, a0, a2
+	ADD	t1, a1, a2
+	sltu	t0, a1, t0			# dst + len <= src -> memcpy
+	sltu	t1, a0, t1			# dst >= src + len -> memcpy
+	and	t0, t1
+	beqz	t0, __memcpy
+	 move	v0, a0				/* return value */
+	beqz	a2, r_out
+	END(memmove)
+
+	/* fall through to __rmemcpy */
+LEAF(__rmemcpy)					/* a0=dst a1=src a2=len */
+	 sltu	t0, a1, a0
+	beqz	t0, r_end_bytes_up		# src >= dst
+	 nop
+	ADD	a0, a2				# dst = dst + len
+	ADD	a1, a2				# src = src + len
+
+r_end_bytes:
+	lb	t0, -1(a1)
+	SUB	a2, a2, 0x1
+	sb	t0, -1(a0)
+	SUB	a1, a1, 0x1
+	bnez	a2, r_end_bytes
+	 SUB	a0, a0, 0x1
+
+r_out:
+	jr	ra
+	 move	a2, zero
+
+r_end_bytes_up:
+	lb	t0, (a1)
+	SUB	a2, a2, 0x1
+	sb	t0, (a0)
+	ADD	a1, a1, 0x1
+	bnez	a2, r_end_bytes_up
+	 ADD	a0, a0, 0x1
+
+	jr	ra
+	 move	a2, zero
+	END(__rmemcpy)