Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 342 insertions, 0 deletions

diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
new file mode 100644
index 000000000000..1405383463ea
--- /dev/null
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -0,0 +1,342 @@
+/*
+ * linux/arch/arm/mach-sa1100/neponset.c
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ptrace.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/serial_sa1100.h>
+#include <asm/arch/assabet.h>
+#include <asm/arch/neponset.h>
+#include <asm/hardware/sa1111.h>
+#include <asm/sizes.h>
+
+/*
+ * Install handler for Neponset IRQ.  Note that we have to loop here
+ * since the ETHERNET and USAR IRQs are level based, and we need to
+ * ensure that the IRQ signal is deasserted before returning.  This
+ * is rather unfortunate.
+ */
+static void
+neponset_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
+{
+	unsigned int irr;
+
+	while (1) {
+		struct irqdesc *d;
+
+		/*
+		 * Acknowledge the parent IRQ.
+		 */
+		desc->chip->ack(irq);
+
+		/*
+		 * Read the interrupt reason register.  Let's have all
+		 * active IRQ bits high.  Note: there is a typo in the
+		 * Neponset user's guide for the SA1111 IRR level.
+		 */
+		irr = IRR ^ (IRR_ETHERNET | IRR_USAR);
+
+		if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0)
+			break;
+
+		/*
+		 * Since there is no individual mask, we have to
+		 * mask the parent IRQ.  This is safe, since we'll
+		 * recheck the register for any pending IRQs.
+		 */
+		if (irr & (IRR_ETHERNET | IRR_USAR)) {
+			desc->chip->mask(irq);
+
+			if (irr & IRR_ETHERNET) {
+				d = irq_desc + IRQ_NEPONSET_SMC9196;
+				d->handle(IRQ_NEPONSET_SMC9196, d, regs);
+			}
+
+			if (irr & IRR_USAR) {
+				d = irq_desc + IRQ_NEPONSET_USAR;
+				d->handle(IRQ_NEPONSET_USAR, d, regs);
+			}
+
+			desc->chip->unmask(irq);
+		}
+
+		if (irr & IRR_SA1111) {
+			d = irq_desc + IRQ_NEPONSET_SA1111;
+			d->handle(IRQ_NEPONSET_SA1111, d, regs);
+		}
+	}
+}
+
+static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
+{
+	u_int mdm_ctl0 = MDM_CTL_0;
+
+	if (port->mapbase == _Ser1UTCR0) {
+		if (mctrl & TIOCM_RTS)
+			mdm_ctl0 &= ~MDM_CTL0_RTS2;
+		else
+			mdm_ctl0 |= MDM_CTL0_RTS2;
+
+		if (mctrl & TIOCM_DTR)
+			mdm_ctl0 &= ~MDM_CTL0_DTR2;
+		else
+			mdm_ctl0 |= MDM_CTL0_DTR2;
+	} else if (port->mapbase == _Ser3UTCR0) {
+		if (mctrl & TIOCM_RTS)
+			mdm_ctl0 &= ~MDM_CTL0_RTS1;
+		else
+			mdm_ctl0 |= MDM_CTL0_RTS1;
+
+		if (mctrl & TIOCM_DTR)
+			mdm_ctl0 &= ~MDM_CTL0_DTR1;
+		else
+			mdm_ctl0 |= MDM_CTL0_DTR1;
+	}
+
+	MDM_CTL_0 = mdm_ctl0;
+}
+
+static u_int neponset_get_mctrl(struct uart_port *port)
+{
+	u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
+	u_int mdm_ctl1 = MDM_CTL_1;
+
+	if (port->mapbase == _Ser1UTCR0) {
+		if (mdm_ctl1 & MDM_CTL1_DCD2)
+			ret &= ~TIOCM_CD;
+		if (mdm_ctl1 & MDM_CTL1_CTS2)
+			ret &= ~TIOCM_CTS;
+		if (mdm_ctl1 & MDM_CTL1_DSR2)
+			ret &= ~TIOCM_DSR;
+	} else if (port->mapbase == _Ser3UTCR0) {
+		if (mdm_ctl1 & MDM_CTL1_DCD1)
+			ret &= ~TIOCM_CD;
+		if (mdm_ctl1 & MDM_CTL1_CTS1)
+			ret &= ~TIOCM_CTS;
+		if (mdm_ctl1 & MDM_CTL1_DSR1)
+			ret &= ~TIOCM_DSR;
+	}
+
+	return ret;
+}
+
+static struct sa1100_port_fns neponset_port_fns __initdata = {
+	.set_mctrl	= neponset_set_mctrl,
+	.get_mctrl	= neponset_get_mctrl,
+};
+
+static int neponset_probe(struct device *dev)
+{
+	sa1100_register_uart_fns(&neponset_port_fns);
+
+	/*
+	 * Install handler for GPIO25.
+	 */
+	set_irq_type(IRQ_GPIO25, IRQT_RISING);
+	set_irq_chained_handler(IRQ_GPIO25, neponset_irq_handler);
+
+	/*
+	 * We would set IRQ_GPIO25 to be a wake-up IRQ, but
+	 * unfortunately something on the Neponset activates
+	 * this IRQ on sleep (ethernet?)
+	 */
+#if 0
+	enable_irq_wake(IRQ_GPIO25);
+#endif
+
+	/*
+	 * Setup other Neponset IRQs.  SA1111 will be done by the
+	 * generic SA1111 code.
+	 */
+	set_irq_handler(IRQ_NEPONSET_SMC9196, do_simple_IRQ);
+	set_irq_flags(IRQ_NEPONSET_SMC9196, IRQF_VALID | IRQF_PROBE);
+	set_irq_handler(IRQ_NEPONSET_USAR, do_simple_IRQ);
+	set_irq_flags(IRQ_NEPONSET_USAR, IRQF_VALID | IRQF_PROBE);
+
+	/*
+	 * Disable GPIO 0/1 drivers so the buttons work on the module.
+	 */
+	NCR_0 = NCR_GP01_OFF;
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+/*
+ * LDM power management.
+ */
+static int neponset_suspend(struct device *dev, pm_message_t state, u32 level)
+{
+	/*
+	 * Save state.
+	 */
+	if (level == SUSPEND_SAVE_STATE ||
+	    level == SUSPEND_DISABLE ||
+	    level == SUSPEND_POWER_DOWN) {
+		if (!dev->power.saved_state)
+			dev->power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL);
+		if (!dev->power.saved_state)
+			return -ENOMEM;
+
+		*(unsigned int *)dev->power.saved_state = NCR_0;
+	}
+
+	return 0;
+}
+
+static int neponset_resume(struct device *dev, u32 level)
+{
+	if (level == RESUME_RESTORE_STATE || level == RESUME_ENABLE) {
+		if (dev->power.saved_state) {
+			NCR_0 = *(unsigned int *)dev->power.saved_state;
+			kfree(dev->power.saved_state);
+			dev->power.saved_state = NULL;
+		}
+	}
+
+	return 0;
+}
+
+#else
+#define neponset_suspend NULL
+#define neponset_resume  NULL
+#endif
+
+static struct device_driver neponset_device_driver = {
+	.name		= "neponset",
+	.bus		= &platform_bus_type,
+	.probe		= neponset_probe,
+	.suspend	= neponset_suspend,
+	.resume		= neponset_resume,
+};
+
+static struct resource neponset_resources[] = {
+	[0] = {
+		.start	= 0x10000000,
+		.end	= 0x17ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device neponset_device = {
+	.name		= "neponset",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(neponset_resources),
+	.resource	= neponset_resources,
+};
+
+static struct resource sa1111_resources[] = {
+	[0] = {
+		.start	= 0x40000000,
+		.end	= 0x40001fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_NEPONSET_SA1111,
+		.end	= IRQ_NEPONSET_SA1111,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 sa1111_dmamask = 0xffffffffUL;
+
+static struct platform_device sa1111_device = {
+	.name		= "sa1111",
+	.id		= 0,
+	.dev		= {
+		.dma_mask = &sa1111_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(sa1111_resources),
+	.resource	= sa1111_resources,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name	= "smc91x-regs",
+		.start	= SA1100_CS3_PHYS,
+		.end	= SA1100_CS3_PHYS + 0x01ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_NEPONSET_SMC9196,
+		.end	= IRQ_NEPONSET_SMC9196,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.name	= "smc91x-attrib",
+		.start	= SA1100_CS3_PHYS + 0x02000000,
+		.end	= SA1100_CS3_PHYS + 0x03ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&neponset_device,
+	&sa1111_device,
+	&smc91x_device,
+};
+
+static int __init neponset_init(void)
+{
+	driver_register(&neponset_device_driver);
+
+	/*
+	 * The Neponset is only present on the Assabet machine type.
+	 */
+	if (!machine_is_assabet())
+		return -ENODEV;
+
+	/*
+	 * Ensure that the memory bus request/grant signals are setup,
+	 * and the grant is held in its inactive state, whether or not
+	 * we actually have a Neponset attached.
+	 */
+	sa1110_mb_disable();
+
+	if (!machine_has_neponset()) {
+		printk(KERN_DEBUG "Neponset expansion board not present\n");
+		return -ENODEV;
+	}
+
+	if (WHOAMI != 0x11) {
+		printk(KERN_WARNING "Neponset board detected, but "
+			"wrong ID: %02x\n", WHOAMI);
+		return -ENODEV;
+	}
+
+	return platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+subsys_initcall(neponset_init);
+
+static struct map_desc neponset_io_desc[] __initdata = {
+ /* virtual     physical    length type */
+  { 0xf3000000, 0x10000000, SZ_1M, MT_DEVICE }, /* System Registers */
+  { 0xf4000000, 0x40000000, SZ_1M, MT_DEVICE }  /* SA-1111 */
+};
+
+void __init neponset_map_io(void)
+{
+	iotable_init(neponset_io_desc, ARRAY_SIZE(neponset_io_desc));
+}