Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 332 insertions, 0 deletions

diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
new file mode 100644
index 000000000000..66a929cb7bc5
--- /dev/null
+++ b/arch/arm/mach-sa1100/irq.c
@@ -0,0 +1,332 @@
+/*
+ * linux/arch/arm/mach-sa1100/irq.c
+ *
+ * Copyright (C) 1999-2001 Nicolas Pitre
+ *
+ * Generic IRQ handling for the SA11x0, GPIO 11-27 IRQ demultiplexing.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+
+#include "generic.h"
+
+
+/*
+ * SA1100 GPIO edge detection for IRQs:
+ * IRQs are generated on Falling-Edge, Rising-Edge, or both.
+ * Use this instead of directly setting GRER/GFER.
+ */
+static int GPIO_IRQ_rising_edge;
+static int GPIO_IRQ_falling_edge;
+static int GPIO_IRQ_mask = (1 << 11) - 1;
+
+/*
+ * To get the GPIO number from an IRQ number
+ */
+#define GPIO_11_27_IRQ(i)	((i) - 21)
+#define GPIO11_27_MASK(irq)	(1 << GPIO_11_27_IRQ(irq))
+
+static int sa1100_gpio_type(unsigned int irq, unsigned int type)
+{
+	unsigned int mask;
+
+	if (irq <= 10)
+		mask = 1 << irq;
+	else
+		mask = GPIO11_27_MASK(irq);
+
+	if (type == IRQT_PROBE) {
+		if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
+			return 0;
+		type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+	}
+
+	if (type & __IRQT_RISEDGE) {
+		GPIO_IRQ_rising_edge |= mask;
+	} else
+		GPIO_IRQ_rising_edge &= ~mask;
+	if (type & __IRQT_FALEDGE) {
+		GPIO_IRQ_falling_edge |= mask;
+	} else
+		GPIO_IRQ_falling_edge &= ~mask;
+
+	GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
+	GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
+
+	return 0;
+}
+
+/*
+ * GPIO IRQs must be acknowledged.  This is for IRQs from 0 to 10.
+ */
+static void sa1100_low_gpio_ack(unsigned int irq)
+{
+	GEDR = (1 << irq);
+}
+
+static void sa1100_low_gpio_mask(unsigned int irq)
+{
+	ICMR &= ~(1 << irq);
+}
+
+static void sa1100_low_gpio_unmask(unsigned int irq)
+{
+	ICMR |= 1 << irq;
+}
+
+static int sa1100_low_gpio_wake(unsigned int irq, unsigned int on)
+{
+	if (on)
+		PWER |= 1 << irq;
+	else
+		PWER &= ~(1 << irq);
+	return 0;
+}
+
+static struct irqchip sa1100_low_gpio_chip = {
+	.ack		= sa1100_low_gpio_ack,
+	.mask		= sa1100_low_gpio_mask,
+	.unmask		= sa1100_low_gpio_unmask,
+	.type		= sa1100_gpio_type,
+	.wake		= sa1100_low_gpio_wake,
+};
+
+/*
+ * IRQ11 (GPIO11 through 27) handler.  We enter here with the
+ * irq_controller_lock held, and IRQs disabled.  Decode the IRQ
+ * and call the handler.
+ */
+static void
+sa1100_high_gpio_handler(unsigned int irq, struct irqdesc *desc,
+			 struct pt_regs *regs)
+{
+	unsigned int mask;
+
+	mask = GEDR & 0xfffff800;
+	do {
+		/*
+		 * clear down all currently active IRQ sources.
+		 * We will be processing them all.
+		 */
+		GEDR = mask;
+
+		irq = IRQ_GPIO11;
+		desc = irq_desc + irq;
+		mask >>= 11;
+		do {
+			if (mask & 1)
+				desc->handle(irq, desc, regs);
+			mask >>= 1;
+			irq++;
+			desc++;
+		} while (mask);
+
+		mask = GEDR & 0xfffff800;
+	} while (mask);
+}
+
+/*
+ * Like GPIO0 to 10, GPIO11-27 IRQs need to be handled specially.
+ * In addition, the IRQs are all collected up into one bit in the
+ * interrupt controller registers.
+ */
+static void sa1100_high_gpio_ack(unsigned int irq)
+{
+	unsigned int mask = GPIO11_27_MASK(irq);
+
+	GEDR = mask;
+}
+
+static void sa1100_high_gpio_mask(unsigned int irq)
+{
+	unsigned int mask = GPIO11_27_MASK(irq);
+
+	GPIO_IRQ_mask &= ~mask;
+
+	GRER &= ~mask;
+	GFER &= ~mask;
+}
+
+static void sa1100_high_gpio_unmask(unsigned int irq)
+{
+	unsigned int mask = GPIO11_27_MASK(irq);
+
+	GPIO_IRQ_mask |= mask;
+
+	GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
+	GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
+}
+
+static int sa1100_high_gpio_wake(unsigned int irq, unsigned int on)
+{
+	if (on)
+		PWER |= GPIO11_27_MASK(irq);
+	else
+		PWER &= ~GPIO11_27_MASK(irq);
+	return 0;
+}
+
+static struct irqchip sa1100_high_gpio_chip = {
+	.ack		= sa1100_high_gpio_ack,
+	.mask		= sa1100_high_gpio_mask,
+	.unmask		= sa1100_high_gpio_unmask,
+	.type		= sa1100_gpio_type,
+	.wake		= sa1100_high_gpio_wake,
+};
+
+/*
+ * We don't need to ACK IRQs on the SA1100 unless they're GPIOs
+ * this is for internal IRQs i.e. from 11 to 31.
+ */
+static void sa1100_mask_irq(unsigned int irq)
+{
+	ICMR &= ~(1 << irq);
+}
+
+static void sa1100_unmask_irq(unsigned int irq)
+{
+	ICMR |= (1 << irq);
+}
+
+static struct irqchip sa1100_normal_chip = {
+	.ack		= sa1100_mask_irq,
+	.mask		= sa1100_mask_irq,
+	.unmask		= sa1100_unmask_irq,
+};
+
+static struct resource irq_resource = {
+	.name	= "irqs",
+	.start	= 0x90050000,
+	.end	= 0x9005ffff,
+};
+
+static struct sa1100irq_state {
+	unsigned int	saved;
+	unsigned int	icmr;
+	unsigned int	iclr;
+	unsigned int	iccr;
+} sa1100irq_state;
+
+static int sa1100irq_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct sa1100irq_state *st = &sa1100irq_state;
+
+	st->saved = 1;
+	st->icmr = ICMR;
+	st->iclr = ICLR;
+	st->iccr = ICCR;
+
+	/*
+	 * Disable all GPIO-based interrupts.
+	 */
+	ICMR &= ~(IC_GPIO11_27|IC_GPIO10|IC_GPIO9|IC_GPIO8|IC_GPIO7|
+		  IC_GPIO6|IC_GPIO5|IC_GPIO4|IC_GPIO3|IC_GPIO2|
+		  IC_GPIO1|IC_GPIO0);
+
+	/*
+	 * Set the appropriate edges for wakeup.
+	 */
+	GRER = PWER & GPIO_IRQ_rising_edge;
+	GFER = PWER & GPIO_IRQ_falling_edge;
+	
+	/*
+	 * Clear any pending GPIO interrupts.
+	 */
+	GEDR = GEDR;
+
+	return 0;
+}
+
+static int sa1100irq_resume(struct sys_device *dev)
+{
+	struct sa1100irq_state *st = &sa1100irq_state;
+
+	if (st->saved) {
+		ICCR = st->iccr;
+		ICLR = st->iclr;
+
+		GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
+		GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
+
+		ICMR = st->icmr;
+	}
+	return 0;
+}
+
+static struct sysdev_class sa1100irq_sysclass = {
+	set_kset_name("sa11x0-irq"),
+	.suspend	= sa1100irq_suspend,
+	.resume		= sa1100irq_resume,
+};
+
+static struct sys_device sa1100irq_device = {
+	.id		= 0,
+	.cls		= &sa1100irq_sysclass,
+};
+
+static int __init sa1100irq_init_devicefs(void)
+{
+	sysdev_class_register(&sa1100irq_sysclass);
+	return sysdev_register(&sa1100irq_device);
+}
+
+device_initcall(sa1100irq_init_devicefs);
+
+void __init sa1100_init_irq(void)
+{
+	unsigned int irq;
+
+	request_resource(&iomem_resource, &irq_resource);
+
+	/* disable all IRQs */
+	ICMR = 0;
+
+	/* all IRQs are IRQ, not FIQ */
+	ICLR = 0;
+
+	/* clear all GPIO edge detects */
+	GFER = 0;
+	GRER = 0;
+	GEDR = -1;
+
+	/*
+	 * Whatever the doc says, this has to be set for the wait-on-irq
+	 * instruction to work... on a SA1100 rev 9 at least.
+	 */
+	ICCR = 1;
+
+	for (irq = 0; irq <= 10; irq++) {
+		set_irq_chip(irq, &sa1100_low_gpio_chip);
+		set_irq_handler(irq, do_edge_IRQ);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	}
+
+	for (irq = 12; irq <= 31; irq++) {
+		set_irq_chip(irq, &sa1100_normal_chip);
+		set_irq_handler(irq, do_level_IRQ);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	for (irq = 32; irq <= 48; irq++) {
+		set_irq_chip(irq, &sa1100_high_gpio_chip);
+		set_irq_handler(irq, do_edge_IRQ);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	}
+
+	/*
+	 * Install handler for GPIO 11-27 edge detect interrupts
+	 */
+	set_irq_chip(IRQ_GPIO11_27, &sa1100_normal_chip);
+	set_irq_chained_handler(IRQ_GPIO11_27, sa1100_high_gpio_handler);
+}