Merge branch 'master' into for-linus

1 files changed, 0 insertions, 225 deletions

diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
deleted file mode 100644
index d578021d1a10..000000000000
--- a/arch/arm/mach-pxa/e740.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/clk.h>
-#include <linux/mfd/t7l66xb.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-#include <mach/irda.h>
-#include <mach/irqs.h>
-#include <mach/audio.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-#include "devices.h"
-
-/* ------------------------ e740 video support --------------------------- */
-
-static struct w100_gen_regs e740_lcd_regs = {
-	.lcd_format =            0x00008023,
-	.lcdd_cntl1 =            0x0f000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00ffff03,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e740_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 20,
-	.right_margin    = 28,
-	.upper_margin    = 9,
-	.lower_margin    = 8,
-	.crtc_ss         = 0x80140013,
-	.crtc_ls         = 0x81150110,
-	.crtc_gs         = 0x80050005,
-	.crtc_vpos_gs    = 0x000a0009,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa906000a,
-	.crtc_gclk       = 0x80050108,
-	.crtc_goe        = 0x80050108,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-	.crtc_ps1_active =       0x41060010,
-};
-
-static struct w100_gpio_regs e740_w100_gpio_info = {
-	.init_data1 = 0x21002103,
-	.gpio_dir1  = 0xffffdeff,
-	.gpio_oe1   = 0x03c00643,
-	.init_data2 = 0x003f003f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000000ff,
-};
-
-static struct w100fb_mach_info e740_fb_info = {
-	.modelist   = &e740_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e740_lcd_regs,
-	.gpio       = &e740_w100_gpio_info,
-	.xtal_freq = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e740_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e740_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e740_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e740_fb_resources),
-	.resource       = e740_fb_resources,
-};
-
-/* --------------------------- MFP Pin config -------------------------- */
-
-static unsigned long e740_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO79_nCS_3,   /* CS3 - IMAGEON */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* UDC */
-	GPIO13_GPIO,
-	GPIO3_GPIO,
-
-	/* IrDA */
-	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* Audio power control */
-	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
-	GPIO40_GPIO,  /* Mic amp power */
-	GPIO41_GPIO,  /* Headphone amp power */
-
-	/* PC Card */
-	GPIO8_GPIO,   /* CD0 */
-	GPIO44_GPIO,  /* CD1 */
-	GPIO11_GPIO,  /* IRQ0 */
-	GPIO6_GPIO,   /* IRQ1 */
-	GPIO27_GPIO,  /* RST0 */
-	GPIO24_GPIO,  /* RST1 */
-	GPIO20_GPIO,  /* PWR0 */
-	GPIO23_GPIO,  /* PWR1 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* -------------------- e740 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e740_t7l66xb_info = {
-	.irq_base 		= IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-};
-
-static struct platform_device e740_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e740_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&e740_fb_device,
-	&e740_t7l66xb_device,
-};
-
-static void __init e740_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
-			"UDCCLK", &pxa25x_device_udc.dev),
-	eseries_get_tmio_gpios();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E740, "Toshiba e740")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e740_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-