ARM: dts: exynos: Use lower case hex addresses in node unit addresses

Convert all hex addresses in node unit addresses to lower case to fix warnings
like:
    arch/arm/boot/dts/exynos5422-odroidhc1.dtb: Warning (simple_bus_reg):
      Node /soc/nocp@10CA1000 simple-bus unit address format error, expected "10ca1000"

Conversion was done using sed:

    $ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm/boot/dts/exynos*.dts*

Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

1 files changed, 13 insertions, 13 deletions

diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index 5e88c9645975..12c6b011576b 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -106,13 +106,13 @@
 			#clock-cells = <1>;
 		};
 
-		clock_g2d: clock-controller@10A00000 {
+		clock_g2d: clock-controller@10a00000 {
 			compatible = "samsung,exynos5260-clock-g2d";
 			reg = <0x10A00000 0x10000>;
 			#clock-cells = <1>;
 		};
 
-		clock_mif: clock-controller@10CE0000 {
+		clock_mif: clock-controller@10ce0000 {
 			compatible = "samsung,exynos5260-clock-mif";
 			reg = <0x10CE0000 0x10000>;
 			#clock-cells = <1>;
@@ -130,25 +130,25 @@
 			#clock-cells = <1>;
 		};
 
-		clock_fsys: clock-controller@122E0000 {
+		clock_fsys: clock-controller@122e0000 {
 			compatible = "samsung,exynos5260-clock-fsys";
 			reg = <0x122E0000 0x10000>;
 			#clock-cells = <1>;
 		};
 
-		clock_aud: clock-controller@128C0000 {
+		clock_aud: clock-controller@128c0000 {
 			compatible = "samsung,exynos5260-clock-aud";
 			reg = <0x128C0000 0x10000>;
 			#clock-cells = <1>;
 		};
 
-		clock_isp: clock-controller@133C0000 {
+		clock_isp: clock-controller@133c0000 {
 			compatible = "samsung,exynos5260-clock-isp";
 			reg = <0x133C0000 0x10000>;
 			#clock-cells = <1>;
 		};
 
-		clock_gscl: clock-controller@13F00000 {
+		clock_gscl: clock-controller@13f00000 {
 			compatible = "samsung,exynos5260-clock-gscl";
 			reg = <0x13F00000 0x10000>;
 			#clock-cells = <1>;
@@ -179,7 +179,7 @@
 			reg = <0x10000000 0x100>;
 		};
 
-		mct: mct@100B0000 {
+		mct: mct@100b0000 {
 			compatible = "samsung,exynos4210-mct";
 			reg = <0x100B0000 0x1000>;
 			clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
@@ -198,7 +198,7 @@
 				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		cci: cci@10F00000 {
+		cci: cci@10f00000 {
 			compatible = "arm,cci-400";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -236,18 +236,18 @@
 			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		pinctrl_2: pinctrl@128B0000 {
+		pinctrl_2: pinctrl@128b0000 {
 			compatible = "samsung,exynos5260-pinctrl";
 			reg = <0x128B0000 0x1000>;
 			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		pmu_system_controller: system-controller@10D50000 {
+		pmu_system_controller: system-controller@10d50000 {
 			compatible = "samsung,exynos5260-pmu", "syscon";
 			reg = <0x10D50000 0x10000>;
 		};
 
-		uart0: serial@12C00000 {
+		uart0: serial@12c00000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x12C00000 0x100>;
 			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
@@ -256,7 +256,7 @@
 			status = "disabled";
 		};
 
-		uart1: serial@12C10000 {
+		uart1: serial@12c10000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x12C10000 0x100>;
 			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
@@ -265,7 +265,7 @@
 			status = "disabled";
 		};
 
-		uart2: serial@12C20000 {
+		uart2: serial@12c20000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x12C20000 0x100>;
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;