diff options
| author | Sebastian Reichel <sebastian.reichel@collabora.com> | 2020-05-10 01:56:03 +0200 |
|---|---|---|
| committer | Sebastian Reichel <sebastian.reichel@collabora.com> | 2020-05-10 01:56:03 +0200 |
| commit | bf584e4dbd5bac7b1aaddbd33a7116364f919819 (patch) | |
| tree | 1a4ebb22e283da0b363d9ad497f11624a2f4f439 /Documentation | |
| parent | 1072ceada4586f7c1d316a0dd9fa751a7055969c (diff) | |
| parent | 60ab7f4153b6af461c90d572c31104086b44639f (diff) | |
Merge tag 'tags/linear-ranges-lib' into psy-next
lib: Add linear ranges helper library and start using it
Series extracts a "linear ranges" helper out of the regulator
framework. Linear ranges helper is intended to help converting
real-world values to register values when conversion is linear. I
suspect this is useful also for power subsystem and possibly for clk.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Diffstat (limited to 'Documentation')
57 files changed, 452 insertions, 324 deletions
diff --git a/Documentation/admin-guide/device-mapper/dm-integrity.rst b/Documentation/admin-guide/device-mapper/dm-integrity.rst index c00f9f11e3f3..8439d2ae689b 100644 --- a/Documentation/admin-guide/device-mapper/dm-integrity.rst +++ b/Documentation/admin-guide/device-mapper/dm-integrity.rst @@ -182,12 +182,15 @@ fix_padding space-efficient. If this option is not present, large padding is used - that is for compatibility with older kernels. - -The journal mode (D/J), buffer_sectors, journal_watermark, commit_time can -be changed when reloading the target (load an inactive table and swap the -tables with suspend and resume). The other arguments should not be changed -when reloading the target because the layout of disk data depend on them -and the reloaded target would be non-functional. +allow_discards + Allow block discard requests (a.k.a. TRIM) for the integrity device. + Discards are only allowed to devices using internal hash. + +The journal mode (D/J), buffer_sectors, journal_watermark, commit_time and +allow_discards can be changed when reloading the target (load an inactive +table and swap the tables with suspend and resume). The other arguments +should not be changed when reloading the target because the layout of disk +data depend on them and the reloaded target would be non-functional. The layout of the formatted block device: diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index f2a93c8679e8..7bc83f3d9bdf 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -5187,8 +5187,7 @@ usbcore.old_scheme_first= [USB] Start with the old device initialization - scheme, applies only to low and full-speed devices - (default 0 = off). + scheme (default 0 = off). usbcore.usbfs_memory_mb= [USB] Memory limit (in MB) for buffers allocated by diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst index 39c95c0e13d3..0d427fd10941 100644 --- a/Documentation/admin-guide/sysctl/kernel.rst +++ b/Documentation/admin-guide/sysctl/kernel.rst @@ -390,9 +390,17 @@ When ``kptr_restrict`` is set to 2, kernel pointers printed using modprobe ======== -This gives the full path of the modprobe command which the kernel will -use to load modules. This can be used to debug module loading -requests:: +The full path to the usermode helper for autoloading kernel modules, +by default "/sbin/modprobe". This binary is executed when the kernel +requests a module. For example, if userspace passes an unknown +filesystem type to mount(), then the kernel will automatically request +the corresponding filesystem module by executing this usermode helper. +This usermode helper should insert the needed module into the kernel. + +This sysctl only affects module autoloading. It has no effect on the +ability to explicitly insert modules. + +This sysctl can be used to debug module loading requests:: echo '#! /bin/sh' > /tmp/modprobe echo 'echo "$@" >> /tmp/modprobe.log' >> /tmp/modprobe @@ -400,10 +408,15 @@ requests:: chmod a+x /tmp/modprobe echo /tmp/modprobe > /proc/sys/kernel/modprobe -This only applies when the *kernel* is requesting that the module be -loaded; it won't have any effect if the module is being loaded -explicitly using ``modprobe`` from userspace. +Alternatively, if this sysctl is set to the empty string, then module +autoloading is completely disabled. The kernel will not try to +execute a usermode helper at all, nor will it call the +kernel_module_request LSM hook. +If CONFIG_STATIC_USERMODEHELPER=y is set in the kernel configuration, +then the configured static usermode helper overrides this sysctl, +except that the empty string is still accepted to completely disable +module autoloading as described above. modules_disabled ================ @@ -446,28 +459,6 @@ Notes: successful IPC object allocation. If an IPC object allocation syscall fails, it is undefined if the value remains unmodified or is reset to -1. -modprobe: -========= - -The path to the usermode helper for autoloading kernel modules, by -default "/sbin/modprobe". This binary is executed when the kernel -requests a module. For example, if userspace passes an unknown -filesystem type to mount(), then the kernel will automatically request -the corresponding filesystem module by executing this usermode helper. -This usermode helper should insert the needed module into the kernel. - -This sysctl only affects module autoloading. It has no effect on the -ability to explicitly insert modules. - -If this sysctl is set to the empty string, then module autoloading is -completely disabled. The kernel will not try to execute a usermode -helper at all, nor will it call the kernel_module_request LSM hook. - -If CONFIG_STATIC_USERMODEHELPER=y is set in the kernel configuration, -then the configured static usermode helper overrides this sysctl, -except that the empty string is still accepted to completely disable -module autoloading as described above. - nmi_watchdog ============ diff --git a/Documentation/arm64/amu.rst b/Documentation/arm64/amu.rst index 5057b11100ed..036783ee327f 100644 --- a/Documentation/arm64/amu.rst +++ b/Documentation/arm64/amu.rst @@ -23,13 +23,14 @@ optional external memory-mapped interface. Version 1 of the Activity Monitors architecture implements a counter group of four fixed and architecturally defined 64-bit event counters. - - CPU cycle counter: increments at the frequency of the CPU. - - Constant counter: increments at the fixed frequency of the system - clock. - - Instructions retired: increments with every architecturally executed - instruction. - - Memory stall cycles: counts instruction dispatch stall cycles caused by - misses in the last level cache within the clock domain. + +- CPU cycle counter: increments at the frequency of the CPU. +- Constant counter: increments at the fixed frequency of the system + clock. +- Instructions retired: increments with every architecturally executed + instruction. +- Memory stall cycles: counts instruction dispatch stall cycles caused by + misses in the last level cache within the clock domain. When in WFI or WFE these counters do not increment. @@ -57,11 +58,12 @@ counters, only the presence of the extension. Firmware (code running at higher exception levels, e.g. arm-tf) support is needed to: - - Enable access for lower exception levels (EL2 and EL1) to the AMU - registers. - - Enable the counters. If not enabled these will read as 0. - - Save/restore the counters before/after the CPU is being put/brought up - from the 'off' power state. + +- Enable access for lower exception levels (EL2 and EL1) to the AMU + registers. +- Enable the counters. If not enabled these will read as 0. +- Save/restore the counters before/after the CPU is being put/brought up + from the 'off' power state. When using kernels that have this feature enabled but boot with broken firmware the user may experience panics or lockups when accessing the @@ -78,10 +80,11 @@ are not trapped in EL2/EL3. The fixed counters of AMUv1 are accessible though the following system register definitions: - - SYS_AMEVCNTR0_CORE_EL0 - - SYS_AMEVCNTR0_CONST_EL0 - - SYS_AMEVCNTR0_INST_RET_EL0 - - SYS_AMEVCNTR0_MEM_STALL_EL0 + +- SYS_AMEVCNTR0_CORE_EL0 +- SYS_AMEVCNTR0_CONST_EL0 +- SYS_AMEVCNTR0_INST_RET_EL0 +- SYS_AMEVCNTR0_MEM_STALL_EL0 Auxiliary platform specific counters can be accessed using SYS_AMEVCNTR1_EL0(n), where n is a value between 0 and 15. @@ -93,9 +96,10 @@ Userspace access ---------------- Currently, access from userspace to the AMU registers is disabled due to: - - Security reasons: they might expose information about code executed in - secure mode. - - Purpose: AMU counters are intended for system management use. + +- Security reasons: they might expose information about code executed in + secure mode. +- Purpose: AMU counters are intended for system management use. Also, the presence of the feature is not visible to userspace. @@ -105,8 +109,9 @@ Virtualization Currently, access from userspace (EL0) and kernelspace (EL1) on the KVM guest side is disabled due to: - - Security reasons: they might expose information about code executed - by other guests or the host. + +- Security reasons: they might expose information about code executed + by other guests or the host. Any attempt to access the AMU registers will result in an UNDEFINED exception being injected into the guest. diff --git a/Documentation/core-api/timekeeping.rst b/Documentation/core-api/timekeeping.rst index c0ffa30c7c37..729e24864fe7 100644 --- a/Documentation/core-api/timekeeping.rst +++ b/Documentation/core-api/timekeeping.rst @@ -154,9 +154,9 @@ architectures. These are the recommended replacements: Use ktime_get() or ktime_get_ts64() instead. -.. c:function:: struct timeval do_gettimeofday( void ) - struct timespec getnstimeofday( void ) - struct timespec64 getnstimeofday64( void ) +.. c:function:: void do_gettimeofday( struct timeval * ) + void getnstimeofday( struct timespec * ) + void getnstimeofday64( struct timespec64 * ) void ktime_get_real_ts( struct timespec * ) ktime_get_real_ts64() is a direct replacement, but consider using diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index 1df680d07461..7782d9985082 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -2,6 +2,7 @@ DT_DOC_CHECKER ?= dt-doc-validate DT_EXTRACT_EX ?= dt-extract-example DT_MK_SCHEMA ?= dt-mk-schema +DT_MK_SCHEMA_USERONLY_FLAG := $(if $(DT_SCHEMA_FILES), -u) quiet_cmd_chk_binding = CHKDT $(patsubst $(srctree)/%,%,$<) cmd_chk_binding = $(DT_DOC_CHECKER) -u $(srctree)/$(src) $< ; \ @@ -13,16 +14,18 @@ $(obj)/%.example.dts: $(src)/%.yaml FORCE # Use full schemas when checking %.example.dts DT_TMP_SCHEMA := $(obj)/processed-schema-examples.yaml +find_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \ + -name 'processed-schema*' ! \ + -name '*.example.dt.yaml' \) + quiet_cmd_mk_schema = SCHEMA $@ - cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(real-prereqs) + cmd_mk_schema = rm -f $@ ; \ + $(if $(DT_MK_SCHEMA_FLAGS), \ + echo $(real-prereqs), \ + $(find_cmd)) | \ + xargs $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) >> $@ -DT_DOCS = $(addprefix $(src)/, \ - $(shell \ - cd $(srctree)/$(src) && \ - find * \( -name '*.yaml' ! \ - -name 'processed-schema*' ! \ - -name '*.example.dt.yaml' \) \ - )) +DT_DOCS = $(shell $(find_cmd) | sed -e 's|^$(srctree)/||') DT_SCHEMA_FILES ?= $(DT_DOCS) @@ -37,7 +40,7 @@ override DTC_FLAGS := \ $(obj)/processed-schema-examples.yaml: $(DT_DOCS) FORCE $(call if_changed,mk_schema) -$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := -u +$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := $(DT_MK_SCHEMA_USERONLY_FLAG) $(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) FORCE $(call if_changed,mk_schema) diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml index aa0738b4d534..e713a6fe4cf7 100644 --- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml @@ -42,6 +42,10 @@ properties: description: See section 2.3.9 of the DeviceTree Specification. + '#address-cells': true + + '#size-cells': true + required: - "#interconnect-cells" - compatible @@ -59,6 +63,8 @@ examples: compatible = "allwinner,sun5i-a13-mbus"; reg = <0x01c01000 0x1000>; clocks = <&ccu CLK_MBUS>; + #address-cells = <1>; + #size-cells = <1>; dma-ranges = <0x00000000 0x40000000 0x20000000>; #interconnect-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml index de9a465096db..444aeea27db8 100644 --- a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml +++ b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml @@ -91,7 +91,7 @@ required: examples: - | - vco1: clock@00 { + vco1: clock { compatible = "arm,impd1-vco1"; #clock-cells = <0>; lock-offset = <0x08>; diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt index a6b2b2b8f3d9..d3c2a4914ea2 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt @@ -1,5 +1,5 @@ -Analog Device ADV7123 Video DAC -------------------------------- +Analog Devices ADV7123 Video DAC +-------------------------------- The ADV7123 is a digital-to-analog converter that outputs VGA signals from a parallel video input. diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index e8ddec5d9d91..659523f538bf 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt @@ -1,5 +1,5 @@ -Analog Device ADV7511(W)/13/33/35 HDMI Encoders ------------------------------------------ +Analog Devices ADV7511(W)/13/33/35 HDMI Encoders +------------------------------------------------ The ADV7511, ADV7511W, ADV7513, ADV7533 and ADV7535 are HDMI audio and video transmitters compatible with HDMI 1.4 and DVI 1.0. They support color space diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml index fd931b293816..b900973b5f7b 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml @@ -37,7 +37,6 @@ examples: dsi { #address-cells = <1>; #size-cells = <0>; - reg = <0xff450000 0x1000>; panel@0 { compatible = "leadtek,ltk500hd1829"; diff --git a/Documentation/devicetree/bindings/display/panel/lvds.yaml b/Documentation/devicetree/bindings/display/panel/lvds.yaml index d0083301acbe..946dd354256c 100644 --- a/Documentation/devicetree/bindings/display/panel/lvds.yaml +++ b/Documentation/devicetree/bindings/display/panel/lvds.yaml @@ -96,12 +96,20 @@ properties: If set, reverse the bit order described in the data mappings below on all data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6. + port: true + ports: true + required: - compatible - data-mapping - width-mm - height-mm - panel-timing - - port + +oneOf: + - required: + - port + - required: + - ports ... diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml index d9fdb58e06b4..6913923df569 100644 --- a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml +++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml @@ -37,7 +37,6 @@ examples: dsi { #address-cells = <1>; #size-cells = <0>; - reg = <0xff450000 0x1000>; panel@0 { compatible = "xinpeng,xpp055c272"; diff --git a/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt b/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt index b38ee732efa9..cd17684aaab5 100644 --- a/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt +++ b/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt @@ -1,4 +1,4 @@ -Analog Device AXI-DMAC DMA controller +Analog Devices AXI-DMAC DMA controller Required properties: - compatible: Must be "adi,axi-dmac-1.00.a". diff --git a/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml index 86cfb599256e..371f18773198 100644 --- a/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml +++ b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml @@ -22,9 +22,7 @@ properties: const: socionext,uniphier-xdmac reg: - items: - - description: XDMAC base register region (offset and length) - - description: XDMAC extension register region (offset and length) + maxItems: 1 interrupts: maxItems: 1 @@ -49,12 +47,13 @@ required: - reg - interrupts - "#dma-cells" + - dma-channels examples: - | xdmac: dma-controller@5fc10000 { compatible = "socionext,uniphier-xdmac"; - reg = <0x5fc10000 0x1000>, <0x5fc20000 0x800>; + reg = <0x5fc10000 0x5300>; interrupts = <0 188 4>; #dma-cells = <2>; dma-channels = <16>; diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml index 57a240d2d026..7db78767c02d 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml @@ -2,7 +2,7 @@ # Copyright 2019 Analog Devices Inc. %YAML 1.2 --- -$id: http://devicetree.org/schemas/bindings/hwmon/adi,axi-fan-control.yaml# +$id: http://devicetree.org/schemas/hwmon/adi,axi-fan-control.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Analog Devices AXI FAN Control Device Tree Bindings @@ -47,7 +47,7 @@ required: examples: - | - fpga_axi: fpga-axi@0 { + fpga_axi: fpga-axi { #address-cells = <0x2>; #size-cells = <0x1>; diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml index 76985034ea73..46c441574f98 100644 --- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/adt7475.yaml# +$id: http://devicetree.org/schemas/hwmon/adt7475.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: ADT7475 hwmon sensor diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml index 933ba37944d7..dd8eb15aeb63 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/bindings/iio/adc/st,stm32-adc.yaml#" +$id: "http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: STMicroelectronics STM32 ADC bindings diff --git a/Documentation/devicetree/bindings/iio/dac/ad5755.txt b/Documentation/devicetree/bindings/iio/dac/ad5755.txt index f0bbd7e1029b..502e1e55adbd 100644 --- a/Documentation/devicetree/bindings/iio/dac/ad5755.txt +++ b/Documentation/devicetree/bindings/iio/dac/ad5755.txt @@ -1,4 +1,4 @@ -* Analog Device AD5755 IIO Multi-Channel DAC Linux Driver +* Analog Devices AD5755 IIO Multi-Channel DAC Linux Driver Required properties: - compatible: Has to contain one of the following: diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml index d9c25cf4b92f..58d81ca43460 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml @@ -2,7 +2,7 @@ # Copyright 2020 Analog Devices Inc. %YAML 1.2 --- -$id: http://devicetree.org/schemas/bindings/iio/dac/adi,ad5770r.yaml# +$id: http://devicetree.org/schemas/iio/dac/adi,ad5770r.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Analog Devices AD5770R DAC device driver @@ -49,93 +49,86 @@ properties: asserted during driver probe. maxItems: 1 - channel0: + channel@0: description: Represents an external channel which are connected to the DAC. Channel 0 can act both as a current source and sink. type: object properties: - num: + reg: description: This represents the channel number. - items: - const: 0 + const: 0 adi,range-microamp: description: Output range of the channel. oneOf: - - $ref: /schemas/types.yaml#/definitions/int32-array - items: - - enum: [0 300000] - - enum: [-60000 0] - - enum: [-60000 300000] + - const: 0 + - const: 300000 + - items: + - const: -60000 + - const: 0 + - items: + - const: -60000 + - const: 300000 - channel1: + channel@1: description: Represents an external channel which are connected to the DAC. type: object properties: - num: + reg: description: This represents the channel number. - items: - const: 1 + const: 1 adi,range-microamp: description: Output range of the channel. - oneOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - - enum: [0 140000] - - enum: [0 250000] + items: + - const: 0 + - enum: [ 140000, 250000 ] - channel2: + channel@2: description: Represents an external channel which are connected to the DAC. type: object properties: - num: + reg: description: This represents the channel number. - items: - const: 2 + const: 2 adi,range-microamp: description: Output range of the channel. - oneOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - - enum: [0 140000] - - enum: [0 250000] + items: + - const: 0 + - enum: [ 55000, 150000 ] patternProperties: "^channel@([3-5])$": type: object description: Represents the external channels which are connected to the DAC. properties: - num: + reg: description: This represents the channel number. - items: - minimum: 3 - maximum: 5 + minimum: 3 + maximum: 5 adi,range-microamp: description: Output range of the channel. - oneOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - - enum: [0 45000] - - enum: [0 100000] + items: + - const: 0 + - enum: [ 45000, 100000 ] required: - reg -- diff-channels -- channel0 -- channel1 -- channel2 -- channel3 -- channel4 -- channel5 +- channel@0 +- channel@1 +- channel@2 +- channel@3 +- channel@4 +- channel@5 examples: - | @@ -144,40 +137,42 @@ examples: #size-cells = <0>; ad5770r@0 { - compatible = "ad5770r"; + compatible = "adi,ad5770r"; reg = <0>; spi-max-frequency = <1000000>; vref-supply = <&vref>; adi,external-resistor; reset-gpios = <&gpio 22 0>; + #address-cells = <1>; + #size-cells = <0>; channel@0 { - num = <0>; - adi,range-microamp = <(-60000) 300000>; + reg = <0>; + adi,range-microamp = <0 300000>; }; channel@1 { - num = <1>; + reg = <1>; adi,range-microamp = <0 140000>; }; channel@2 { - num = <2>; + reg = <2>; adi,range-microamp = <0 55000>; }; channel@3 { - num = <3>; + reg = <3>; adi,range-microamp = <0 45000>; }; channel@4 { - num = <4>; + reg = <4>; adi,range-microamp = <0 45000>; }; channel@5 { - num = <5>; + reg = <5>; adi,range-microamp = <0 45000>; }; }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml index 8d58709d4b47..383d64a91854 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml @@ -109,7 +109,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - i2c@00000000 { + i2c { #address-cells = <1>; #size-cells = <0>; edt-ft5x06@38 { diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml index 9c6b91fee477..26f1fcf0857a 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml @@ -56,9 +56,8 @@ properties: cell with zero. allOf: - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minItems: 4 - maxItems: 4 + - minItems: 4 + maxItems: 4 required: diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml index 12516bd89cf9..611bda38d187 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml @@ -97,30 +97,35 @@ examples: #include <dt-bindings/clock/tegra186-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - memory-controller@2c00000 { - compatible = "nvidia,tegra186-mc"; - reg = <0x0 0x02c00000 0x0 0xb0000>; - interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; - + bus { #address-cells = <2>; #size-cells = <2>; - ranges = <0x0 0x02c00000 0x02c00000 0x0 0xb0000>; + memory-controller@2c00000 { + compatible = "nvidia,tegra186-mc"; + reg = <0x0 0x02c00000 0x0 0xb0000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x0 0x02c00000 0x0 0x02c00000 0x0 0xb0000>; - /* - * Memory clients have access to all 40 bits that the memory - * controller can address. - */ - dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; + /* + * Memory clients have access to all 40 bits that the memory + * controller can address. + */ + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; - external-memory-controller@2c60000 { - compatible = "nvidia,tegra186-emc"; - reg = <0x0 0x02c60000 0x0 0x50000>; - interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bpmp TEGRA186_CLK_EMC>; - clock-names = "emc"; + external-memory-controller@2c60000 { + compatible = "nvidia,tegra186-emc"; + reg = <0x0 0x02c60000 0x0 0x50000>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_EMC>; + clock-names = "emc"; - nvidia,bpmp = <&bpmp>; + nvidia,bpmp = <&bpmp>; + }; }; }; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml index aa922c560fcc..65018a019e1d 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml @@ -123,7 +123,9 @@ examples: #include <dt-bindings/leds/common.h> i2c { - pmic: pmic@4b { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@4b { compatible = "rohm,bd71837"; reg = <0x4b>; interrupt-parent = <&gpio1>; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml index 402e40dfe0b8..77bcca2d414f 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml @@ -128,7 +128,9 @@ examples: #include <dt-bindings/leds/common.h> i2c { - pmic: pmic@4b { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@4b { compatible = "rohm,bd71847"; reg = <0x4b>; interrupt-parent = <&gpio1>; diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml index d9ad9260e348..be7faa6dc055 100644 --- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml @@ -259,8 +259,6 @@ properties: additionalProperties: false - additionalProperties: false - additionalProperties: false required: @@ -274,7 +272,7 @@ examples: - | #include <dt-bindings/mfd/st,stpmic1.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - i2c@0 { + i2c { #address-cells = <1>; #size-cells = <0>; pmic@33 { diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index 8927941c74bb..5aa141ccc113 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -45,6 +45,9 @@ properties: bits of a vendor specific ID. - items: - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$" + - const: ethernet-phy-ieee802.3-c22 + - items: + - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$" - const: ethernet-phy-ieee802.3-c45 reg: diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index 5b88fae0307d..ff8b0f211aa1 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -22,6 +22,8 @@ Optional properties: - fsl,err006687-workaround-present: If present indicates that the system has the hardware workaround for ERR006687 applied and does not need a software workaround. +- gpr: phandle of SoC general purpose register mode. Required for wake on LAN + on some SoCs -interrupt-names: names of the interrupts listed in interrupts property in the same order. The defaults if not specified are __Number of interrupts__ __Default__ diff --git a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml index b9f90081046f..67df3fe861ee 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml @@ -48,6 +48,7 @@ examples: switch@10 { compatible = "qca,qca8337"; + reg = <0x10>; /* ... */ }; }; diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt index beca6466d59a..d2202791c1d4 100644 --- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt @@ -29,7 +29,7 @@ Required properties for compatible string qcom,wcn399x-bt: Optional properties for compatible string qcom,wcn399x-bt: - - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt + - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml - firmware-name: specify the name of nvm firmware to load - clocks: clock provided to the controller diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml index 144ae29e7141..f8bd28ff31c1 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -97,7 +97,7 @@ then: - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 maximum: 63 - default: 0 + default: 32 qcom,charge-ctrl-value: description: @@ -130,7 +130,7 @@ then: - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 maximum: 3 - default: 2 + default: 0 qcom,preemphasis-width: description: @@ -152,7 +152,7 @@ then: - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 maximum: 3 - default: 0 + default: 1 required: - compatible diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml index fd1982c56104..3f913d6d1c3d 100644 --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml @@ -146,7 +146,7 @@ patternProperties: bindings specified in Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt Torrent SERDES should follow the bindings specified in - Documentation/devicetree/bindings/phy/phy-cadence-dp.txt + Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml required: - compatible diff --git a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml index 24c217b76580..41ece1d85315 100644 --- a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml @@ -31,10 +31,17 @@ additionalProperties: false examples: - | - cros-ec@0 { - compatible = "google,cros-ec-spi"; - cros_ec_pwm: ec-pwm { - compatible = "google,cros-ec-pwm"; - #pwm-cells = <1>; + spi { + #address-cells = <1>; + #size-cells = <0>; + + cros-ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + + cros_ec_pwm: ec-pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; }; }; diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml index f0acce2029fd..3b019fa6db31 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml @@ -37,7 +37,6 @@ properties: type: object additionalProperties: false - additionalProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml index a682af0dc67e..ae6e7ab36c58 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml @@ -75,7 +75,8 @@ properties: description: | disables over voltage protection of this buck - additionalProperties: false + unevaluatedProperties: false + additionalProperties: false required: diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml index 71ce032b8cf8..1e52dafcb5c9 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml @@ -35,6 +35,8 @@ patternProperties: description: should be "ldo1", ..., "ldo7" + unevaluatedProperties: false + "^BUCK[1-7]$": type: object allOf: @@ -103,5 +105,7 @@ patternProperties: required: - regulator-name - additionalProperties: false + + unevaluatedProperties: false + additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml index a323b1696eee..543d4b52397e 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml @@ -41,6 +41,8 @@ patternProperties: description: should be "ldo1", ..., "ldo7" + unevaluatedProperties: false + "^BUCK[1-8]$": type: object allOf: @@ -99,5 +101,7 @@ patternProperties: required: - regulator-name - additionalProperties: false + + unevaluatedProperties: false + additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml index 526fd00bcb16..d797cc23406f 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml @@ -40,6 +40,8 @@ patternProperties: description: should be "ldo1", ..., "ldo6" + unevaluatedProperties: false + "^BUCK[1-6]$": type: object allOf: @@ -93,5 +95,7 @@ patternProperties: required: - regulator-name - additionalProperties: false + + unevaluatedProperties: false + additionalProperties: false diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml index 89ab67f20a7f..c147900f9041 100644 --- a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml +++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml @@ -39,7 +39,7 @@ additionalProperties: false examples: - | - rng { + rng@7e104000 { compatible = "brcm,bcm2835-rng"; reg = <0x7e104000 0x10>; interrupts = <2 29>; diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml index 7cd0e278ed85..a3ba2186d6a1 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml @@ -56,6 +56,9 @@ properties: - const: tx - const: rx + power-domains: + maxItems: 1 + rockchip,capture-channels: allOf: - $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt deleted file mode 100644 index ec20c1271e92..000000000000 --- a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt +++ /dev/null @@ -1,45 +0,0 @@ -* Rockchip SPDIF transceiver - -The S/PDIF audio block is a stereo transceiver that allows the -processor to receive and transmit digital audio via an coaxial cable or -a fibre cable. - -Required properties: - -- compatible: should be one of the following: - - "rockchip,rk3066-spdif" - - "rockchip,rk3188-spdif" - - "rockchip,rk3228-spdif" - - "rockchip,rk3288-spdif" - - "rockchip,rk3328-spdif" - - "rockchip,rk3366-spdif" - - "rockchip,rk3368-spdif" - - "rockchip,rk3399-spdif" -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: should contain the SPDIF interrupt. -- dmas: DMA specifiers for tx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: should be "tx" -- clocks: a list of phandle + clock-specifier pairs, one for each entry - in clock-names. -- clock-names: should contain following: - - "hclk": clock for SPDIF controller - - "mclk" : clock for SPDIF bus - -Required properties on RK3288: - - rockchip,grf: the phandle of the syscon node for the general register - file (GRF) - -Example for the rk3188 SPDIF controller: - -spdif: spdif@1011e000 { - compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif"; - reg = <0x1011e000 0x2000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmac1_s 8>; - dma-names = "tx"; - clock-names = "hclk", "mclk"; - clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>; - #sound-dai-cells = <0>; -}; diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml new file mode 100644 index 000000000000..c467152656f7 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/rockchip-spdif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SPDIF transceiver + +description: + The S/PDIF audio block is a stereo transceiver that allows the + processor to receive and transmit digital audio via a coaxial or + fibre cable. + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + oneOf: + - const: rockchip,rk3066-spdif + - const: rockchip,rk3228-spdif + - const: rockchip,rk3328-spdif + - const: rockchip,rk3366-spdif + - const: rockchip,rk3368-spdif + - const: rockchip,rk3399-spdif + - items: + - enum: + - rockchip,rk3188-spdif + - rockchip,rk3288-spdif + - const: rockchip,rk3066-spdif + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: clock for SPDIF bus + - description: clock for SPDIF controller + + clock-names: + items: + - const: mclk + - const: hclk + + dmas: + maxItems: 1 + + dma-names: + const: tx + + power-domains: + maxItems: 1 + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle of the syscon node for the GRF register. + Required property on RK3288. + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + - "#sound-dai-cells" + +if: + properties: + compatible: + contains: + const: rockchip,rk3288-spdif + +then: + required: + - rockchip,grf + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3188-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + spdif: spdif@1011e000 { + compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif"; + reg = <0x1011e000 0x2000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF>; + clock-names = "mclk", "hclk"; + dmas = <&dmac1_s 8>; + dma-names = "tx"; + #sound-dai-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml index 0cf470eaf2a0..5c16cf59ca00 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml @@ -61,7 +61,7 @@ examples: #include <dt-bindings/clock/qcom,gcc-sdm845.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - soc: soc@0 { + soc: soc { #address-cells = <2>; #size-cells = <2>; diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml index 1d6877875077..c2d2ee43ba67 100644 --- a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml +++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml @@ -56,7 +56,7 @@ additionalProperties: false examples: - | #include <dt-bindings/clock/jz4740-cgu.h> - usb_phy: usb-phy@0 { + usb_phy: usb-phy { compatible = "usb-nop-xceiv"; #phy-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt index cb695aa3fba4..fbdd01756752 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt @@ -52,8 +52,8 @@ A child node must exist to represent the core DWC3 IP block. The name of the node is not important. The content of the node is defined in dwc3.txt. Phy documentation is provided in the following places: -Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt - USB3 QMP PHY -Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt - USB2 QUSB2 PHY +Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt - USB3 QMP PHY +Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml - USB2 QUSB2 PHY Example device nodes: diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml index 92d8631b9aa6..031452aa25bc 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml @@ -18,6 +18,7 @@ properties: - renesas,r8a774c0-usb3-peri # RZ/G2E - renesas,r8a7795-usb3-peri # R-Car H3 - renesas,r8a7796-usb3-peri # R-Car M3-W + - renesas,r8a77961-usb3-peri # R-Car M3-W+ - renesas,r8a77965-usb3-peri # R-Car M3-N - renesas,r8a77990-usb3-peri # R-Car E3 - const: renesas,rcar-gen3-usb3-peri diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml index 469affa872d3..a7ae95598ccb 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml @@ -40,6 +40,7 @@ properties: - renesas,usbhs-r8a774c0 # RZ/G2E - renesas,usbhs-r8a7795 # R-Car H3 - renesas,usbhs-r8a7796 # R-Car M3-W + - renesas,usbhs-r8a77961 # R-Car M3-W+ - renesas,usbhs-r8a77965 # R-Car M3-N - renesas,usbhs-r8a77990 # R-Car E3 - renesas,usbhs-r8a77995 # R-Car D3 diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt index c8c4b00ecb94..94520493233b 100644 --- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt @@ -16,7 +16,7 @@ A child node must exist to represent the core DWC3 IP block. The name of the node is not important. The content of the node is defined in dwc3.txt. Phy documentation is provided in the following places: -Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt - USB2.0 PHY +Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml - USB2.0 PHY Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt - Type-C PHY Example device nodes: diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index 3f378951d624..dc025f126d71 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -16,7 +16,8 @@ Required properties: - "renesas,xhci-r8a7791" for r8a7791 SoC - "renesas,xhci-r8a7793" for r8a7793 SoC - "renesas,xhci-r8a7795" for r8a7795 SoC - - "renesas,xhci-r8a7796" for r8a7796 SoC + - "renesas,xhci-r8a7796" for r8a77960 SoC + - "renesas,xhci-r8a77961" for r8a77961 SoC - "renesas,xhci-r8a77965" for r8a77965 SoC - "renesas,xhci-r8a77990" for r8a77990 SoC - "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 or RZ/G1 compatible diff --git a/Documentation/filesystems/debugfs.rst b/Documentation/filesystems/debugfs.rst index db9ea0854040..6c032db235a5 100644 --- a/Documentation/filesystems/debugfs.rst +++ b/Documentation/filesystems/debugfs.rst @@ -79,8 +79,8 @@ created with any of:: struct dentry *parent, u8 *value); void debugfs_create_u16(const char *name, umode_t mode, struct dentry *parent, u16 *value); - struct dentry *debugfs_create_u32(const char *name, umode_t mode, - struct dentry *parent, u32 *value); + void debugfs_create_u32(const char *name, umode_t mode, + struct dentry *parent, u32 *value); void debugfs_create_u64(const char *name, umode_t mode, struct dentry *parent, u64 *value); diff --git a/Documentation/hwmon/isl68137.rst b/Documentation/hwmon/isl68137.rst index cc4b61447b63..0e71b22047f8 100644 --- a/Documentation/hwmon/isl68137.rst +++ b/Documentation/hwmon/isl68137.rst @@ -16,7 +16,7 @@ Supported chips: * Renesas ISL68220 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl68220' Addresses scanned: - @@ -26,7 +26,7 @@ Supported chips: * Renesas ISL68221 - Prefix: 'raa_dmpvr2_3rail' + Prefix: 'isl68221' Addresses scanned: - @@ -36,7 +36,7 @@ Supported chips: * Renesas ISL68222 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl68222' Addresses scanned: - @@ -46,7 +46,7 @@ Supported chips: * Renesas ISL68223 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl68223' Addresses scanned: - @@ -56,7 +56,7 @@ Supported chips: * Renesas ISL68224 - Prefix: 'raa_dmpvr2_3rail' + Prefix: 'isl68224' Addresses scanned: - @@ -66,7 +66,7 @@ Supported chips: * Renesas ISL68225 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl68225' Addresses scanned: - @@ -76,7 +76,7 @@ Supported chips: * Renesas ISL68226 - Prefix: 'raa_dmpvr2_3rail' + Prefix: 'isl68226' Addresses scanned: - @@ -86,7 +86,7 @@ Supported chips: * Renesas ISL68227 - Prefix: 'raa_dmpvr2_1rail' + Prefix: 'isl68227' Addresses scanned: - @@ -96,7 +96,7 @@ Supported chips: * Renesas ISL68229 - Prefix: 'raa_dmpvr2_3rail' + Prefix: 'isl68229' Addresses scanned: - @@ -106,7 +106,7 @@ Supported chips: * Renesas ISL68233 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl68233' Addresses scanned: - @@ -116,7 +116,7 @@ Supported chips: * Renesas ISL68239 - Prefix: 'raa_dmpvr2_3rail' + Prefix: 'isl68239' Addresses scanned: - @@ -126,7 +126,7 @@ Supported chips: * Renesas ISL69222 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69222' Addresses scanned: - @@ -136,7 +136,7 @@ Supported chips: * Renesas ISL69223 - Prefix: 'raa_dmpvr2_3rail' + Prefix: 'isl69223' Addresses scanned: - @@ -146,7 +146,7 @@ Supported chips: * Renesas ISL69224 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69224' Addresses scanned: - @@ -156,7 +156,7 @@ Supported chips: * Renesas ISL69225 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69225' Addresses scanned: - @@ -166,7 +166,7 @@ Supported chips: * Renesas ISL69227 - Prefix: 'raa_dmpvr2_3rail' + Prefix: 'isl69227' Addresses scanned: - @@ -176,7 +176,7 @@ Supported chips: * Renesas ISL69228 - Prefix: 'raa_dmpvr2_3rail' + Prefix: 'isl69228' Addresses scanned: - @@ -186,7 +186,7 @@ Supported chips: * Renesas ISL69234 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69234' Addresses scanned: - @@ -196,7 +196,7 @@ Supported chips: * Renesas ISL69236 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69236' Addresses scanned: - @@ -206,7 +206,7 @@ Supported chips: * Renesas ISL69239 - Prefix: 'raa_dmpvr2_3rail' + Prefix: 'isl69239' Addresses scanned: - @@ -216,7 +216,7 @@ Supported chips: * Renesas ISL69242 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69242' Addresses scanned: - @@ -226,7 +226,7 @@ Supported chips: * Renesas ISL69243 - Prefix: 'raa_dmpvr2_1rail' + Prefix: 'isl69243' Addresses scanned: - @@ -236,7 +236,7 @@ Supported chips: * Renesas ISL69247 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69247' Addresses scanned: - @@ -246,7 +246,7 @@ Supported chips: * Renesas ISL69248 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69248' Addresses scanned: - @@ -256,7 +256,7 @@ Supported chips: * Renesas ISL69254 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69254' Addresses scanned: - @@ -266,7 +266,7 @@ Supported chips: * Renesas ISL69255 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69255' Addresses scanned: - @@ -276,7 +276,7 @@ Supported chips: * Renesas ISL69256 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69256' Addresses scanned: - @@ -286,7 +286,7 @@ Supported chips: * Renesas ISL69259 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69259' Addresses scanned: - @@ -296,7 +296,7 @@ Supported chips: * Renesas ISL69260 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69260' Addresses scanned: - @@ -306,7 +306,7 @@ Supported chips: * Renesas ISL69268 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69268' Addresses scanned: - @@ -316,7 +316,7 @@ Supported chips: * Renesas ISL69269 - Prefix: 'raa_dmpvr2_3rail' + Prefix: 'isl69269' Addresses scanned: - @@ -326,7 +326,7 @@ Supported chips: * Renesas ISL69298 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69298' Addresses scanned: - @@ -336,7 +336,7 @@ Supported chips: * Renesas RAA228000 - Prefix: 'raa_dmpvr2_hv' + Prefix: 'raa228000' Addresses scanned: - @@ -346,7 +346,7 @@ Supported chips: * Renesas RAA228004 - Prefix: 'raa_dmpvr2_hv' + Prefix: 'raa228004' Addresses scanned: - @@ -356,7 +356,7 @@ Supported chips: * Renesas RAA228006 - Prefix: 'raa_dmpvr2_hv' + Prefix: 'raa228006' Addresses scanned: - @@ -366,7 +366,7 @@ Supported chips: * Renesas RAA228228 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'raa228228' Addresses scanned: - @@ -376,7 +376,7 @@ Supported chips: * Renesas RAA229001 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'raa229001' Addresses scanned: - @@ -386,7 +386,7 @@ Supported chips: * Renesas RAA229004 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'raa229004' Addresses scanned: - diff --git a/Documentation/kbuild/makefiles.rst b/Documentation/kbuild/makefiles.rst index 04d5c01a2e99..b80257a03830 100644 --- a/Documentation/kbuild/makefiles.rst +++ b/Documentation/kbuild/makefiles.rst @@ -1241,7 +1241,8 @@ When kbuild executes, the following steps are followed (roughly): will be displayed with "make KBUILD_VERBOSE=0". ---- 6.9 Preprocessing linker scripts +6.9 Preprocessing linker scripts +-------------------------------- When the vmlinux image is built, the linker script arch/$(ARCH)/kernel/vmlinux.lds is used. diff --git a/Documentation/networking/devlink/devlink-trap.rst b/Documentation/networking/devlink/devlink-trap.rst index a09971c2115c..fe089acb7783 100644 --- a/Documentation/networking/devlink/devlink-trap.rst +++ b/Documentation/networking/devlink/devlink-trap.rst @@ -257,6 +257,8 @@ drivers: * :doc:`netdevsim` * :doc:`mlxsw` +.. _Generic-Packet-Trap-Groups: + Generic Packet Trap Groups ========================== diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst index 50133d9761c9..6538ede29661 100644 --- a/Documentation/networking/index.rst +++ b/Documentation/networking/index.rst @@ -22,6 +22,7 @@ Contents: z8530book msg_zerocopy failover + net_dim net_failover phy sfp-phylink diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index ee961d322d93..9375324aa8e1 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -812,7 +812,7 @@ tcp_limit_output_bytes - INTEGER tcp_challenge_ack_limit - INTEGER Limits number of Challenge ACK sent per second, as recommended in RFC 5961 (Improving TCP's Robustness to Blind In-Window Attacks) - Default: 100 + Default: 1000 tcp_rx_skb_cache - BOOLEAN Controls a per TCP socket cache of one skb, that might help @@ -983,6 +983,13 @@ ip_early_demux - BOOLEAN reduces overall throughput, in such case you should disable it. Default: 1 +ping_group_range - 2 INTEGERS + Restrict ICMP_PROTO datagram sockets to users in the group range. + The default is "1 0", meaning, that nobody (not even root) may + create ping sockets. Setting it to "100 100" would grant permissions + to the single group. "0 4294967295" would enable it for the world, "100 + 4294967295" would enable it for the users, but not daemons. + tcp_early_demux - BOOLEAN Enable early demux for established TCP sockets. Default: 1 diff --git a/Documentation/networking/net_dim.txt b/Documentation/networking/net_dim.rst index 9bdb7d5a3ba3..3bed9fd95336 100644 --- a/Documentation/networking/net_dim.txt +++ b/Documentation/networking/net_dim.rst @@ -1,28 +1,20 @@ +====================================================== Net DIM - Generic Network Dynamic Interrupt Moderation ====================================================== -Author: - Tal Gilboa <talgi@mellanox.com> - - -Contents -========= +:Author: Tal Gilboa <talgi@mellanox.com> -- Assumptions -- Introduction -- The Net DIM Algorithm -- Registering a Network Device to DIM -- Example +.. contents:: :depth: 2 -Part 0: Assumptions -====================== +Assumptions +=========== This document assumes the reader has basic knowledge in network drivers and in general interrupt moderation. -Part I: Introduction -====================== +Introduction +============ Dynamic Interrupt Moderation (DIM) (in networking) refers to changing the interrupt moderation configuration of a channel in order to optimize packet @@ -41,14 +33,15 @@ number of wanted packets per event. The Net DIM algorithm ascribes importance to increase bandwidth over reducing interrupt rate. -Part II: The Net DIM Algorithm -=============================== +Net DIM Algorithm +================= Each iteration of the Net DIM algorithm follows these steps: -1. Calculates new data sample. -2. Compares it to previous sample. -3. Makes a decision - suggests interrupt moderation configuration fields. -4. Applies a schedule work function, which applies suggested configuration. + +#. Calculates new data sample. +#. Compares it to previous sample. +#. Makes a decision - suggests interrupt moderation configuration fields. +#. Applies a schedule work function, which applies suggested configuration. The first two steps are straightforward, both the new and the previous data are supplied by the driver registered to Net DIM. The previous data is the new data @@ -89,19 +82,21 @@ manoeuvre as it may provide partial data or ignore the algorithm suggestion under some conditions. -Part III: Registering a Network Device to DIM -============================================== +Registering a Network Device to DIM +=================================== -Net DIM API exposes the main function net_dim(struct dim *dim, -struct dim_sample end_sample). This function is the entry point to the Net +Net DIM API exposes the main function net_dim(). +This function is the entry point to the Net DIM algorithm and has to be called every time the driver would like to check if it should change interrupt moderation parameters. The driver should provide two -data structures: struct dim and struct dim_sample. Struct dim +data structures: :c:type:`struct dim <dim>` and +:c:type:`struct dim_sample <dim_sample>`. :c:type:`struct dim <dim>` describes the state of DIM for a specific object (RX queue, TX queue, other queues, etc.). This includes the current selected profile, previous data samples, the callback function provided by the driver and more. -Struct dim_sample describes a data sample, which will be compared to the -data sample stored in struct dim in order to decide on the algorithm's next +:c:type:`struct dim_sample <dim_sample>` describes a data sample, +which will be compared to the data sample stored in :c:type:`struct dim <dim>` +in order to decide on the algorithm's next step. The sample should include bytes, packets and interrupts, measured by the driver. @@ -110,9 +105,10 @@ main net_dim() function. The recommended method is to call net_dim() on each interrupt. Since Net DIM has a built-in moderation and it might decide to skip iterations under certain conditions, there is no need to moderate the net_dim() calls as well. As mentioned above, the driver needs to provide an object of type -struct dim to the net_dim() function call. It is advised for each entity -using Net DIM to hold a struct dim as part of its data structure and use it -as the main Net DIM API object. The struct dim_sample should hold the latest +:c:type:`struct dim <dim>` to the net_dim() function call. It is advised for +each entity using Net DIM to hold a :c:type:`struct dim <dim>` as part of its +data structure and use it as the main Net DIM API object. +The :c:type:`struct dim_sample <dim_sample>` should hold the latest bytes, packets and interrupts count. No need to perform any calculations, just include the raw data. @@ -124,19 +120,19 @@ the data flow. After the work is done, Net DIM algorithm needs to be set to the proper state in order to move to the next iteration. -Part IV: Example -================= +Example +======= The following code demonstrates how to register a driver to Net DIM. The actual usage is not complete but it should make the outline of the usage clear. -my_driver.c: +.. code-block:: c -#include <linux/dim.h> + #include <linux/dim.h> -/* Callback for net DIM to schedule on a decision to change moderation */ -void my_driver_do_dim_work(struct work_struct *work) -{ + /* Callback for net DIM to schedule on a decision to change moderation */ + void my_driver_do_dim_work(struct work_struct *work) + { /* Get struct dim from struct work_struct */ struct dim *dim = container_of(work, struct dim, work); @@ -145,11 +141,11 @@ void my_driver_do_dim_work(struct work_struct *work) /* Signal net DIM work is done and it should move to next iteration */ dim->state = DIM_START_MEASURE; -} + } -/* My driver's interrupt handler */ -int my_driver_handle_interrupt(struct my_driver_entity *my_entity, ...) -{ + /* My driver's interrupt handler */ + int my_driver_handle_interrupt(struct my_driver_entity *my_entity, ...) + { ... /* A struct to hold current measured data */ struct dim_sample dim_sample; @@ -162,13 +158,19 @@ int my_driver_handle_interrupt(struct my_driver_entity *my_entity, ...) /* Call net DIM */ net_dim(&my_entity->dim, dim_sample); ... -} + } -/* My entity's initialization function (my_entity was already allocated) */ -int my_driver_init_my_entity(struct my_driver_entity *my_entity, ...) -{ + /* My entity's initialization function (my_entity was already allocated) */ + int my_driver_init_my_entity(struct my_driver_entity *my_entity, ...) + { ... /* Initiate struct work_struct with my driver's callback function */ INIT_WORK(&my_entity->dim.work, my_driver_do_dim_work); ... -} + } + +Dynamic Interrupt Moderation (DIM) library API +============================================== + +.. kernel-doc:: include/linux/dim.h + :internal: diff --git a/Documentation/x86/boot.rst b/Documentation/x86/boot.rst index fa7ddc0428c8..5325c71ca877 100644 --- a/Documentation/x86/boot.rst +++ b/Documentation/x86/boot.rst @@ -1399,8 +1399,8 @@ must have read/write permission; CS must be __BOOT_CS and DS, ES, SS must be __BOOT_DS; interrupt must be disabled; %rsi must hold the base address of the struct boot_params. -EFI Handover Protocol -===================== +EFI Handover Protocol (deprecated) +================================== This protocol allows boot loaders to defer initialisation to the EFI boot stub. The boot loader is required to load the kernel/initrd(s) @@ -1408,6 +1408,12 @@ from the boot media and jump to the EFI handover protocol entry point which is hdr->handover_offset bytes from the beginning of startup_{32,64}. +The boot loader MUST respect the kernel's PE/COFF metadata when it comes +to section alignment, the memory footprint of the executable image beyond +the size of the file itself, and any other aspect of the PE/COFF header +that may affect correct operation of the image as a PE/COFF binary in the +execution context provided by the EFI firmware. + The function prototype for the handover entry point looks like this:: efi_main(void *handle, efi_system_table_t *table, struct boot_params *bp) @@ -1419,9 +1425,18 @@ UEFI specification. 'bp' is the boot loader-allocated boot params. The boot loader *must* fill out the following fields in bp:: - - hdr.code32_start - hdr.cmd_line_ptr - hdr.ramdisk_image (if applicable) - hdr.ramdisk_size (if applicable) All other fields should be zero. + +NOTE: The EFI Handover Protocol is deprecated in favour of the ordinary PE/COFF + entry point, combined with the LINUX_EFI_INITRD_MEDIA_GUID based initrd + loading protocol (refer to [0] for an example of the bootloader side of + this), which removes the need for any knowledge on the part of the EFI + bootloader regarding the internal representation of boot_params or any + requirements/limitations regarding the placement of the command line + and ramdisk in memory, or the placement of the kernel image itself. + +[0] https://github.com/u-boot/u-boot/commit/ec80b4735a593961fe701cc3a5d717d4739b0fd0 |