Merge tag 'for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 "Core:
   - Add over-current health state
   - Add standard, adaptive and custom charge types
   - Add new properties for start/end charge threshold

  New Drivers / Hardware:
   - UCS1002 Programmable USB Port Power Controller
   - Ingenic JZ47xx Battery Fuel Gauge
   - AXP20x USB Power: Add AXP813 support
   - AT91 poweroff: Add SAM9X60 support
   - OLPC battery: Add XO-1.5 and XO-1.75 support

  Misc Changes:
   - syscon-reboot: support mask property
   - AXP288 fuel gauge: Blacklist ACEPC T8/T11. Looks like some vendor
     thought it's a good idea to build a desktop system with a fuel
     gauge, that slowly "discharges"...
   - cpcap-battery: Fix calculation errors
   - misc fixes"

* tag 'for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (54 commits)
  power: supply: olpc_battery: force the le/be casts
  power: supply: ucs1002: Fix build error without CONFIG_REGULATOR
  power: supply: ucs1002: Fix wrong return value checking
  power: supply: Add driver for Microchip UCS1002
  dt-bindings: power: supply: Add bindings for Microchip UCS1002
  power: supply: core: Add POWER_SUPPLY_HEALTH_OVERCURRENT constant
  power: supply: core: fix clang -Wunsequenced
  power: supply: core: Add missing documentation for CHARGE_CONTROL_* properties
  power: supply: core: Add CHARGE_CONTROL_{START_THRESHOLD,END_THRESHOLD} properties
  power: supply: core: Add Standard, Adaptive, and Custom charge types
  power: supply: axp288_fuel_gauge: Add ACEPC T8 and T11 mini PCs to the blacklist
  power: supply: bq27xxx_battery: Notify also about status changes
  power: supply: olpc_battery: Have the framework register sysfs files for us
  power: supply: olpc_battery: Add OLPC XO 1.75 support
  power: supply: olpc_battery: Avoid using platform_info
  power: supply: olpc_battery: Use devm_power_supply_register()
  power: supply: olpc_battery: Move priv data to a struct
  power: supply: olpc_battery: Use DT to get battery version
  x86/platform/olpc: Use a correct version when making up a battery node
  x86/platform/olpc: Trivial code move in DT fixup
  ...

9 files changed, 133 insertions, 13 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power
index 5e23e22dce1b..b77e30b9014e 100644
--- a/Documentation/ABI/testing/sysfs-class-power
+++ b/Documentation/ABI/testing/sysfs-class-power
@@ -114,15 +114,60 @@ Description:
 		Access: Read
 		Valid values: Represented in microamps
 
+What:		/sys/class/power_supply/<supply_name>/charge_control_limit
+Date:		Oct 2012
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Maximum allowable charging current. Used for charge rate
+		throttling for thermal cooling or improving battery health.
+
+		Access: Read, Write
+		Valid values: Represented in microamps
+
+What:		/sys/class/power_supply/<supply_name>/charge_control_limit_max
+Date:		Oct 2012
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Maximum legal value for the charge_control_limit property.
+
+		Access: Read
+		Valid values: Represented in microamps
+
+What:		/sys/class/power_supply/<supply_name>/charge_control_start_threshold
+Date:		April 2019
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Represents a battery percentage level, below which charging will
+		begin.
+
+		Access: Read, Write
+		Valid values: 0 - 100 (percent)
+
+What:		/sys/class/power_supply/<supply_name>/charge_control_end_threshold
+Date:		April 2019
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Represents a battery percentage level, above which charging will
+		stop.
+
+		Access: Read, Write
+		Valid values: 0 - 100 (percent)
+
 What:		/sys/class/power_supply/<supply_name>/charge_type
 Date:		July 2009
 Contact:	linux-pm@vger.kernel.org
 Description:
 		Represents the type of charging currently being applied to the
-		battery.
+		battery. "Trickle", "Fast", and "Standard" all mean different
+		charging speeds. "Adaptive" means that the charger uses some
+		algorithm to adjust the charge rate dynamically, without
+		any user configuration required. "Custom" means that the charger
+		uses the charge_control_* properties as configuration for some
+		different algorithm.
 
-		Access: Read
-		Valid values: "Unknown", "N/A", "Trickle", "Fast"
+		Access: Read, Write
+		Valid values: "Unknown", "N/A", "Trickle", "Fast", "Standard",
+			      "Adaptive", "Custom"
 
 What:		/sys/class/power_supply/<supply_name>/charge_term_current
 Date:		July 2014
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index e61d00e25b95..9fbde401a090 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -84,7 +84,7 @@ SHDWC SAMA5D2-Compatible Shutdown Controller
 1) shdwc node
 
 required properties:
-- compatible: should be "atmel,sama5d2-shdwc".
+- compatible: should be "atmel,sama5d2-shdwc" or "microchip,sam9x60-shdwc".
 - reg: should contain registers location and length
 - clocks: phandle to input clock.
 - #address-cells: should be one. The cell is the wake-up input index.
@@ -96,6 +96,9 @@ optional properties:
   microseconds. It's usually a board-related property.
 - atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
 
+optional microchip,sam9x60-shdwc properties:
+- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
+
 The node contains child nodes for each wake-up input that the platform uses.
 
 2) input nodes
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.txt b/Documentation/devicetree/bindings/power/reset/syscon-reboot.txt
index 11906316b43d..e23dea8344f8 100644
--- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.txt
+++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.txt
@@ -3,13 +3,20 @@ Generic SYSCON mapped register reset driver
 This is a generic reset driver using syscon to map the reset register.
 The reset is generally performed with a write to the reset register
 defined by the register map pointed by syscon reference plus the offset
-with the mask defined in the reboot node.
+with the value and mask defined in the reboot node.
 
 Required properties:
 - compatible: should contain "syscon-reboot"
 - regmap: this is phandle to the register map node
 - offset: offset in the register map for the reboot register (in bytes)
-- mask: the reset value written to the reboot register (32 bit access)
+- value: the reset value written to the reboot register (32 bit access)
+
+Optional properties:
+- mask: update only the register bits defined by the mask (32 bit)
+
+Legacy usage:
+If a node doesn't contain a value property but contains a mask property, the
+mask property is used as the value.
 
 Default will be little endian mode, 32 bit access only.
 
diff --git a/Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt b/Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt
index ba8d35f66cbe..b2d4968fde7d 100644
--- a/Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt
+++ b/Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt
@@ -4,6 +4,7 @@ Required Properties:
 -compatible: One of: "x-powers,axp202-usb-power-supply"
                      "x-powers,axp221-usb-power-supply"
                      "x-powers,axp223-usb-power-supply"
+		     "x-powers,axp813-usb-power-supply"
 
 The AXP223 PMIC shares most of its behaviour with the AXP221 but has slight
 variations such as the former being able to set the VBUS power supply max
diff --git a/Documentation/devicetree/bindings/power/supply/gpio-charger.txt b/Documentation/devicetree/bindings/power/supply/gpio-charger.txt
index adbb5dc5b6e9..0fb33b2c62a6 100644
--- a/Documentation/devicetree/bindings/power/supply/gpio-charger.txt
+++ b/Documentation/devicetree/bindings/power/supply/gpio-charger.txt
@@ -14,13 +14,17 @@ Required properties :
      usb-cdp (USB charging downstream port)
      usb-aca (USB accessory charger adapter)
 
+Optional properties:
+ - charge-status-gpios: GPIO indicating whether a battery is charging.
+
 Example:
 
 	usb_charger: charger {
 		compatible = "gpio-charger";
 		charger-type = "usb-sdp";
-		gpios = <&gpf0 2 0 0 0>;
-	}
+		gpios = <&gpd 28 GPIO_ACTIVE_LOW>;
+		charge-status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>;
+	};
 
 	battery {
 		power-supplies = <&usb_charger>;
diff --git a/Documentation/devicetree/bindings/power/supply/ingenic,battery.txt b/Documentation/devicetree/bindings/power/supply/ingenic,battery.txt
new file mode 100644
index 000000000000..66430bf73815
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/ingenic,battery.txt
@@ -0,0 +1,31 @@
+* Ingenic JZ47xx battery bindings
+
+Required properties:
+
+- compatible: Must be "ingenic,jz4740-battery".
+- io-channels: phandle and IIO specifier pair to the IIO device.
+  Format described in iio-bindings.txt.
+- monitored-battery: phandle to a "simple-battery" compatible node.
+
+The "monitored-battery" property must be a phandle to a node using the format
+described in battery.txt, with the following properties being required:
+
+- voltage-min-design-microvolt: Drained battery voltage.
+- voltage-max-design-microvolt: Fully charged battery voltage.
+
+Example:
+
+#include <dt-bindings/iio/adc/ingenic,adc.h>
+
+simple_battery: battery {
+	compatible = "simple-battery";
+	voltage-min-design-microvolt = <3600000>;
+	voltage-max-design-microvolt = <4200000>;
+};
+
+ingenic_battery {
+	compatible = "ingenic,jz4740-battery";
+	io-channels = <&adc INGENIC_ADC_BATTERY>;
+	io-channel-names = "battery";
+	monitored-battery = <&simple_battery>;
+};
diff --git a/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt b/Documentation/devicetree/bindings/power/supply/lt3651-charger.txt
index 71f2840e8209..40811ff8de10 100644
--- a/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt
+++ b/Documentation/devicetree/bindings/power/supply/lt3651-charger.txt
@@ -1,14 +1,16 @@
-ltc3651-charger
+Analog Devices LT3651 Charger Power Supply bindings: lt3651-charger
 
 Required properties:
- - compatible: "lltc,ltc3651-charger"
+- compatible: Should contain one of the following:
+ * "lltc,ltc3651-charger", (DEPRECATED: Use "lltc,lt3651-charger")
+ * "lltc,lt3651-charger"
  - lltc,acpr-gpios: Connect to ACPR output. See remark below.
 
 Optional properties:
  - lltc,fault-gpios: Connect to FAULT output. See remark below.
  - lltc,chrg-gpios: Connect to CHRG output. See remark below.
 
-The ltc3651 outputs are open-drain type and active low. The driver assumes the
+The lt3651 outputs are open-drain type and active low. The driver assumes the
 GPIO reports "active" when the output is asserted, so if the pins have been
 connected directly, the GPIO flags should be set to active low also.
 
@@ -20,7 +22,7 @@ attributes to detect changes.
 Example:
 
 	charger: battery-charger {
-		compatible = "lltc,ltc3651-charger";
+		compatible = "lltc,lt3651-charger";
 		lltc,acpr-gpios = <&gpio0 68 GPIO_ACTIVE_LOW>;
 		lltc,fault-gpios = <&gpio0 64 GPIO_ACTIVE_LOW>;
 		lltc,chrg-gpios = <&gpio0 63 GPIO_ACTIVE_LOW>;
diff --git a/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.txt b/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.txt
new file mode 100644
index 000000000000..1d284ad816bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.txt
@@ -0,0 +1,27 @@
+Microchip UCS1002 USB Port Power Controller
+
+Required properties:
+- compatible		: Should be "microchip,ucs1002";
+- reg			: I2C slave address
+
+Optional properties:
+- interrupts		: A list of interrupts lines present (could be either
+			  corresponding to A_DET# pin, ALERT# pin, or both)
+- interrupt-names	: A list of interrupt names. Should contain (if
+			  present):
+			  - "a_det" for line connected to A_DET# pin
+			  - "alert" for line connected to ALERT# pin
+			  Both are expected to be IRQ_TYPE_EDGE_BOTH
+Example:
+
+&i2c3 {
+	charger@32 {
+		compatible = "microchip,ucs1002";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ucs1002_pins>;
+		reg = <0x32>;
+		interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>,
+				      <&gpio3 21 IRQ_TYPE_EDGE_BOTH>;
+		interrupt-names = "a_det", "alert";
+	};
+};
diff --git a/Documentation/devicetree/bindings/power/supply/olpc_battery.txt b/Documentation/devicetree/bindings/power/supply/olpc_battery.txt
index c8901b3992d9..8d87d6b35a98 100644
--- a/Documentation/devicetree/bindings/power/supply/olpc_battery.txt
+++ b/Documentation/devicetree/bindings/power/supply/olpc_battery.txt
@@ -2,4 +2,4 @@ OLPC battery
 ~~~~~~~~~~~~
 
 Required properties:
-  - compatible : "olpc,xo1-battery"
+  - compatible : "olpc,xo1-battery" or "olpc,xo1.5-battery"