diff options
| author | Jean-Philippe Brucker <jean-philippe.brucker@arm.com> | 2019-01-15 12:19:53 +0000 |
|---|---|---|
| committer | Michael S. Tsirkin <mst@redhat.com> | 2019-06-06 17:32:13 -0400 |
| commit | 8447d84e35f2c3b2e76f80319d0b547a9521bafa (patch) | |
| tree | fe47d0adeefd957d3714ef44e9b60029b1a02c60 /Documentation | |
| parent | 0b4a7092ffe568a55bf8f3cefdf79ff666586d91 (diff) | |
dt-bindings: virtio-mmio: Add IOMMU description
The nature of a virtio-mmio node is discovered by the virtio driver at
probe time. However the DMA relation between devices must be described
statically. When a virtio-mmio node is a virtio-iommu device, it needs an
"#iommu-cells" property as specified by bindings/iommu/iommu.txt.
Otherwise, the virtio-mmio device may perform DMA through an IOMMU, which
requires an "iommus" property. Describe these requirements in the
device-tree bindings documentation.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/virtio/mmio.txt | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/virtio/mmio.txt b/Documentation/devicetree/bindings/virtio/mmio.txt index 5069c1b8e193..21af30fbb81f 100644 --- a/Documentation/devicetree/bindings/virtio/mmio.txt +++ b/Documentation/devicetree/bindings/virtio/mmio.txt @@ -8,10 +8,40 @@ Required properties: - reg: control registers base address and size including configuration space - interrupts: interrupt generated by the device +Required properties for virtio-iommu: + +- #iommu-cells: When the node corresponds to a virtio-iommu device, it is + linked to DMA masters using the "iommus" or "iommu-map" + properties [1][2]. #iommu-cells specifies the size of the + "iommus" property. For virtio-iommu #iommu-cells must be + 1, each cell describing a single endpoint ID. + +Optional properties: + +- iommus: If the device accesses memory through an IOMMU, it should + have an "iommus" property [1]. Since virtio-iommu itself + does not access memory through an IOMMU, the "virtio,mmio" + node cannot have both an "#iommu-cells" and an "iommus" + property. + Example: virtio_block@3000 { compatible = "virtio,mmio"; reg = <0x3000 0x100>; interrupts = <41>; + + /* Device has endpoint ID 23 */ + iommus = <&viommu 23> } + + viommu: iommu@3100 { + compatible = "virtio,mmio"; + reg = <0x3100 0x100>; + interrupts = <42>; + + #iommu-cells = <1> + } + +[1] Documentation/devicetree/bindings/iommu/iommu.txt +[2] Documentation/devicetree/bindings/pci/pci-iommu.txt |