Merge branch 'for-gadget/next' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

* 'for-gadget/next' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (24 commits)
  usb: dwc3: gadget: add support for SG lists
  usb: dwc3: gadget: don't force 'LST' always
  usb: dwc3: gadget: don't return anything on prepare trbs
  usb: dwc3: gadget: re-factor dwc3_prepare_trbs()
  usb: gadget: introduce support for sg lists
  usb: renesas: pipe: convert a long if into a XOR operation
  usb: gadget: remove useless depends on Kconfig
  usb: gadget: s3c-hsudc: remove the_controller global
  usb: gadget: s3c-hsudc: use release_mem_region instead of release_resource
  usb: gadget: s3c-hsudc: Add regulator handling
  usb: gadget: s3c-hsudc: use udc_start and udc_stop functions
  usb: gadget: s3c-hsudc: move device registration to probe
  usb: gadget: s3c-hsudc: add missing otg_put_transceiver in probe
  usb: gadget: s3c-hsudc: add __devinit to probe function
  usb: gadget: s3c-hsudc: move platform_data struct to global header
  USB: EHCI: Add Marvell Host Controller driver
  USB: OTG: add Marvell usb OTG driver support
  usb: gadget: mv_udc: drop ARCH dependency
  usb: gadget: mv_udc: fix bug in ep_dequeue
  usb: gadget: enlarge maxburst bit width.
  ...

22 files changed, 1911 insertions, 280 deletions

diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c
index a9eee531ca76..6345bcbf5c73 100644
--- a/arch/arm/mach-s3c2416/mach-smdk2416.c
+++ b/arch/arm/mach-s3c2416/mach-smdk2416.c
@@ -50,6 +50,7 @@
 #include <plat/nand.h>
 #include <plat/sdhci.h>
 #include <plat/udc.h>
+#include <linux/platform_data/s3c-hsudc.h>
 
 #include <plat/regs-fb-v4.h>
 #include <plat/fb.h>
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 4ca8b571f971..92b4c025d37a 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -29,6 +29,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mmc/host.h>
 #include <linux/ioport.h>
+#include <linux/platform_data/s3c-hsudc.h>
 
 #include <asm/irq.h>
 #include <asm/pmu.h>
diff --git a/arch/arm/plat-samsung/include/plat/udc.h b/arch/arm/plat-samsung/include/plat/udc.h
index 8c22d586befb..de8e2288a509 100644
--- a/arch/arm/plat-samsung/include/plat/udc.h
+++ b/arch/arm/plat-samsung/include/plat/udc.h
@@ -37,20 +37,7 @@ struct s3c2410_udc_mach_info {
 
 extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
 
-/**
- * s3c24xx_hsudc_platdata - Platform data for USB High-Speed gadget controller.
- * @epnum: Number of endpoints to be instantiated by the controller driver.
- * @gpio_init: Platform specific USB related GPIO initialization.
- * @gpio_uninit: Platform specific USB releted GPIO uninitialzation.
- *
- * Representation of platform data for the S3C24XX USB 2.0 High Speed gadget
- * controllers.
- */
-struct s3c24xx_hsudc_platdata {
-	unsigned int	epnum;
-	void		(*gpio_init)(void);
-	void		(*gpio_uninit)(void);
-};
+struct s3c24xx_hsudc_platdata;
 
 extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd);
 
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 7367e5cb9831..4c6bedad51fd 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -65,6 +65,22 @@ void dwc3_map_buffer_to_dma(struct dwc3_request *req)
 		return;
 	}
 
+	if (req->request.num_sgs) {
+		int	mapped;
+
+		mapped = dma_map_sg(dwc->dev, req->request.sg,
+				req->request.num_sgs,
+				req->direction ? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+		if (mapped < 0) {
+			dev_err(dwc->dev, "failed to map SGs\n");
+			return;
+		}
+
+		req->request.num_mapped_sgs = mapped;
+		return;
+	}
+
 	if (req->request.dma == DMA_ADDR_INVALID) {
 		req->request.dma = dma_map_single(dwc->dev, req->request.buf,
 				req->request.length, req->direction
@@ -82,6 +98,17 @@ void dwc3_unmap_buffer_from_dma(struct dwc3_request *req)
 		return;
 	}
 
+	if (req->request.num_mapped_sgs) {
+		req->request.dma = DMA_ADDR_INVALID;
+		dma_unmap_sg(dwc->dev, req->request.sg,
+				req->request.num_sgs,
+				req->direction ? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+
+		req->request.num_mapped_sgs = 0;
+		return;
+	}
+
 	if (req->mapped) {
 		dma_unmap_single(dwc->dev, req->request.dma,
 				req->request.length, req->direction
@@ -97,7 +124,11 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
 	struct dwc3			*dwc = dep->dwc;
 
 	if (req->queued) {
-		dep->busy_slot++;
+		if (req->request.num_mapped_sgs)
+			dep->busy_slot += req->request.num_mapped_sgs;
+		else
+			dep->busy_slot++;
+
 		/*
 		 * Skip LINK TRB. We can't use req->trb and check for
 		 * DWC3_TRBCTL_LINK_TRB because it points the TRB we just
@@ -108,6 +139,7 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
 			dep->busy_slot++;
 	}
 	list_del(&req->list);
+	req->trb = NULL;
 
 	if (req->request.status == -EINPROGRESS)
 		req->request.status = status;
@@ -544,6 +576,85 @@ static void dwc3_gadget_ep_free_request(struct usb_ep *ep,
 	kfree(req);
 }
 
+/**
+ * dwc3_prepare_one_trb - setup one TRB from one request
+ * @dep: endpoint for which this request is prepared
+ * @req: dwc3_request pointer
+ */
+static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
+		struct dwc3_request *req, dma_addr_t dma,
+		unsigned length, unsigned last, unsigned chain)
+{
+	struct dwc3		*dwc = dep->dwc;
+	struct dwc3_trb_hw	*trb_hw;
+	struct dwc3_trb		trb;
+
+	unsigned int		cur_slot;
+
+	dev_vdbg(dwc->dev, "%s: req %p dma %08llx length %d%s%s\n",
+			dep->name, req, (unsigned long long) dma,
+			length, last ? " last" : "",
+			chain ? " chain" : "");
+
+	trb_hw = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK];
+	cur_slot = dep->free_slot;
+	dep->free_slot++;
+
+	/* Skip the LINK-TRB on ISOC */
+	if (((cur_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) &&
+			usb_endpoint_xfer_isoc(dep->desc))
+		return;
+
+	memset(&trb, 0, sizeof(trb));
+	if (!req->trb) {
+		dwc3_gadget_move_request_queued(req);
+		req->trb = trb_hw;
+		req->trb_dma = dwc3_trb_dma_offset(dep, trb_hw);
+	}
+
+	if (usb_endpoint_xfer_isoc(dep->desc)) {
+		trb.isp_imi = true;
+		trb.csp = true;
+	} else {
+		trb.chn = chain;
+		trb.lst = last;
+	}
+
+	if (usb_endpoint_xfer_bulk(dep->desc) && dep->stream_capable)
+		trb.sid_sofn = req->request.stream_id;
+
+	switch (usb_endpoint_type(dep->desc)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		trb.trbctl = DWC3_TRBCTL_CONTROL_SETUP;
+		break;
+
+	case USB_ENDPOINT_XFER_ISOC:
+		trb.trbctl = DWC3_TRBCTL_ISOCHRONOUS_FIRST;
+
+		/* IOC every DWC3_TRB_NUM / 4 so we can refill */
+		if (!(cur_slot % (DWC3_TRB_NUM / 4)))
+			trb.ioc = last;
+		break;
+
+	case USB_ENDPOINT_XFER_BULK:
+	case USB_ENDPOINT_XFER_INT:
+		trb.trbctl = DWC3_TRBCTL_NORMAL;
+		break;
+	default:
+		/*
+		 * This is only possible with faulty memory because we
+		 * checked it already :)
+		 */
+		BUG();
+	}
+
+	trb.length	= length;
+	trb.bplh	= dma;
+	trb.hwo		= true;
+
+	dwc3_trb_to_hw(&trb, trb_hw);
+}
+
 /*
  * dwc3_prepare_trbs - setup TRBs from requests
  * @dep: endpoint for which requests are being prepared
@@ -553,18 +664,17 @@ static void dwc3_gadget_ep_free_request(struct usb_ep *ep,
  * transfers. The functions returns once there are not more TRBs available or
  * it run out of requests.
  */
-static struct dwc3_request *dwc3_prepare_trbs(struct dwc3_ep *dep,
-		bool starting)
+static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
 {
-	struct dwc3_request	*req, *n, *ret = NULL;
-	struct dwc3_trb_hw	*trb_hw;
-	struct dwc3_trb		trb;
+	struct dwc3_request	*req, *n;
 	u32			trbs_left;
+	unsigned int		last_one = 0;
 
 	BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM);
 
 	/* the first request must not be queued */
 	trbs_left = (dep->busy_slot - dep->free_slot) & DWC3_TRB_MASK;
+
 	/*
 	 * if busy & slot are equal than it is either full or empty. If we are
 	 * starting to proceed requests then we are empty. Otherwise we ar
@@ -572,7 +682,7 @@ static struct dwc3_request *dwc3_prepare_trbs(struct dwc3_ep *dep,
 	 */
 	if (!trbs_left) {
 		if (!starting)
-			return NULL;
+			return;
 		trbs_left = DWC3_TRB_NUM;
 		/*
 		 * In case we start from scratch, we queue the ISOC requests
@@ -596,94 +706,62 @@ static struct dwc3_request *dwc3_prepare_trbs(struct dwc3_ep *dep,
 
 	/* The last TRB is a link TRB, not used for xfer */
 	if ((trbs_left <= 1) && usb_endpoint_xfer_isoc(dep->desc))
-		return NULL;
+		return;
 
 	list_for_each_entry_safe(req, n, &dep->request_list, list) {
-		unsigned int last_one = 0;
-		unsigned int cur_slot;
+		unsigned	length;
+		dma_addr_t	dma;
 
-		trb_hw = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK];
-		cur_slot = dep->free_slot;
-		dep->free_slot++;
+		if (req->request.num_mapped_sgs > 0) {
+			struct usb_request *request = &req->request;
+			struct scatterlist *sg = request->sg;
+			struct scatterlist *s;
+			int		i;
 
-		/* Skip the LINK-TRB on ISOC */
-		if (((cur_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) &&
-				usb_endpoint_xfer_isoc(dep->desc))
-			continue;
+			for_each_sg(sg, s, request->num_mapped_sgs, i) {
+				unsigned chain = true;
 
-		dwc3_gadget_move_request_queued(req);
-		memset(&trb, 0, sizeof(trb));
-		trbs_left--;
+				length = sg_dma_len(s);
+				dma = sg_dma_address(s);
 
-		/* Is our TRB pool empty? */
-		if (!trbs_left)
-			last_one = 1;
-		/* Is this the last request? */
-		if (list_empty(&dep->request_list))
-			last_one = 1;
+				if (i == (request->num_mapped_sgs - 1)
+						|| sg_is_last(s)) {
+					last_one = true;
+					chain = false;
+				}
 
-		/*
-		 * FIXME we shouldn't need to set LST bit always but we are
-		 * facing some weird problem with the Hardware where it doesn't
-		 * complete even though it has been previously started.
-		 *
-		 * While we're debugging the problem, as a workaround to
-		 * multiple TRBs handling, use only one TRB at a time.
-		 */
-		last_one = 1;
+				trbs_left--;
+				if (!trbs_left)
+					last_one = true;
 
-		req->trb = trb_hw;
-		if (!ret)
-			ret = req;
+				if (last_one)
+					chain = false;
 
-		trb.bplh = req->request.dma;
+				dwc3_prepare_one_trb(dep, req, dma, length,
+						last_one, chain);
 
-		if (usb_endpoint_xfer_isoc(dep->desc)) {
-			trb.isp_imi = true;
-			trb.csp = true;
+				if (last_one)
+					break;
+			}
 		} else {
-			trb.lst = last_one;
-		}
+			dma = req->request.dma;
+			length = req->request.length;
+			trbs_left--;
 
-		if (usb_endpoint_xfer_bulk(dep->desc) && dep->stream_capable)
-			trb.sid_sofn = req->request.stream_id;
+			if (!trbs_left)
+				last_one = 1;
 
-		switch (usb_endpoint_type(dep->desc)) {
-		case USB_ENDPOINT_XFER_CONTROL:
-			trb.trbctl = DWC3_TRBCTL_CONTROL_SETUP;
-			break;
+			/* Is this the last request? */
+			if (list_is_last(&req->list, &dep->request_list))
+				last_one = 1;
 
-		case USB_ENDPOINT_XFER_ISOC:
-			trb.trbctl = DWC3_TRBCTL_ISOCHRONOUS_FIRST;
+			dwc3_prepare_one_trb(dep, req, dma, length,
+					last_one, false);
 
-			/* IOC every DWC3_TRB_NUM / 4 so we can refill */
-			if (!(cur_slot % (DWC3_TRB_NUM / 4)))
-				trb.ioc = last_one;
-			break;
-
-		case USB_ENDPOINT_XFER_BULK:
-		case USB_ENDPOINT_XFER_INT:
-			trb.trbctl = DWC3_TRBCTL_NORMAL;
-			break;
-		default:
-			/*
-			 * This is only possible with faulty memory because we
-			 * checked it already :)
-			 */
-			BUG();
+			if (last_one)
+				break;
 		}
-
-		trb.length	= req->request.length;
-		trb.hwo = true;
-
-		dwc3_trb_to_hw(&trb, trb_hw);
-		req->trb_dma = dwc3_trb_dma_offset(dep, trb_hw);
-
-		if (last_one)
-			break;
 	}
-
-	return ret;
 }
 
 static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
@@ -712,11 +790,13 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
 		/* req points to the first request which will be sent */
 		req = next_request(&dep->req_queued);
 	} else {
+		dwc3_prepare_trbs(dep, start_new);
+
 		/*
 		 * req points to the first request where HWO changed
 		 * from 0 to 1
 		 */
-		req = dwc3_prepare_trbs(dep, start_new);
+		req = next_request(&dep->req_queued);
 	}
 	if (!req) {
 		dep->flags |= DWC3_EP_PENDING_REQUEST;
@@ -2093,6 +2173,7 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc)
 	dwc->gadget.max_speed		= USB_SPEED_SUPER;
 	dwc->gadget.speed		= USB_SPEED_UNKNOWN;
 	dwc->gadget.dev.parent		= dwc->dev;
+	dwc->gadget.sg_supported	= true;
 
 	dma_set_coherent_mask(&dwc->gadget.dev, dwc->dev->coherent_dma_mask);
 
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 93f6c808f570..1fe87aafa087 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -125,7 +125,6 @@ config USB_GADGET_STORAGE_NUM_BUFFERS
 #
 choice
 	prompt "USB Peripheral Controller"
-	depends on USB_GADGET
 	help
 	   A USB device uses a controller to talk to its host.
 	   Systems should have only one such upstream link.
@@ -310,13 +309,13 @@ config USB_S3C_HSUDC
 
 	  This driver has been tested on S3C2416 and S3C2450 processors.
 
-config USB_PXA_U2O
-	tristate "PXA9xx Processor USB2.0 controller"
-	depends on ARCH_MMP
+config USB_MV_UDC
+	tristate "Marvell USB2.0 Device Controller"
 	select USB_GADGET_DUALSPEED
 	help
-	  PXA9xx Processor series include a high speed USB2.0 device
-	  controller, which support high speed and full speed USB peripheral.
+	  Marvell Socs (including PXA and MMP series) include a high speed
+	  USB2.0 OTG controller, which can be configured as high speed or
+	  full speed USB peripheral.
 
 #
 # Controllers available in both integrated and discrete versions
@@ -532,12 +531,10 @@ endchoice
 # Selected by UDC drivers that support high-speed operation.
 config USB_GADGET_DUALSPEED
 	bool
-	depends on USB_GADGET
 
 # Selected by UDC drivers that support super-speed opperation
 config USB_GADGET_SUPERSPEED
 	bool
-	depends on USB_GADGET
 	depends on USB_GADGET_DUALSPEED
 
 #
@@ -545,7 +542,6 @@ config USB_GADGET_SUPERSPEED
 #
 choice
 	tristate "USB Gadget Drivers"
-	depends on USB_GADGET
 	default USB_ETH
 	help
 	  A Linux "Gadget Driver" talks to the USB Peripheral Controller
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index b54ac6190890..b7f6eefc3927 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -27,7 +27,7 @@ obj-$(CONFIG_USB_S3C_HSOTG)	+= s3c-hsotg.o
 obj-$(CONFIG_USB_S3C_HSUDC)	+= s3c-hsudc.o
 obj-$(CONFIG_USB_LANGWELL)	+= langwell_udc.o
 obj-$(CONFIG_USB_EG20T)		+= pch_udc.o
-obj-$(CONFIG_USB_PXA_U2O)	+= mv_udc.o
+obj-$(CONFIG_USB_MV_UDC)	+= mv_udc.o
 mv_udc-y			:= mv_udc_core.o
 obj-$(CONFIG_USB_CI13XXX_MSM)	+= ci13xxx_msm.o
 obj-$(CONFIG_USB_FUSB300)	+= fusb300_udc.o
diff --git a/drivers/usb/gadget/mv_udc.h b/drivers/usb/gadget/mv_udc.h
index 3d8404484613..34aadfae723d 100644
--- a/drivers/usb/gadget/mv_udc.h
+++ b/drivers/usb/gadget/mv_udc.h
@@ -180,7 +180,7 @@ struct mv_udc {
 
 	struct mv_cap_regs __iomem	*cap_regs;
 	struct mv_op_regs __iomem	*op_regs;
-	unsigned int			phy_regs;
+	void __iomem                    *phy_regs;
 	unsigned int			max_eps;
 	struct mv_dqh			*ep_dqh;
 	size_t				ep_dqh_size;
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 142a67f06638..f97e737d26f7 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -276,11 +276,12 @@ static void done(struct mv_ep *ep, struct mv_req *req, int status)
 
 static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
 {
-	u32 tmp, epstatus, bit_pos, direction;
 	struct mv_udc *udc;
 	struct mv_dqh *dqh;
+	u32 bit_pos, direction;
+	u32 usbcmd, epstatus;
 	unsigned int loops;
-	int readsafe, retval = 0;
+	int retval = 0;
 
 	udc = ep->udc;
 	direction = ep_dir(ep);
@@ -293,30 +294,18 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
 		lastreq = list_entry(ep->queue.prev, struct mv_req, queue);
 		lastreq->tail->dtd_next =
 			req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK;
-		if (readl(&udc->op_regs->epprime) & bit_pos) {
-			loops = LOOPS(PRIME_TIMEOUT);
-			while (readl(&udc->op_regs->epprime) & bit_pos) {
-				if (loops == 0) {
-					retval = -ETIME;
-					goto done;
-				}
-				udelay(LOOPS_USEC);
-				loops--;
-			}
-			if (readl(&udc->op_regs->epstatus) & bit_pos)
-				goto done;
-		}
-		readsafe = 0;
+
+		wmb();
+
+		if (readl(&udc->op_regs->epprime) & bit_pos)
+			goto done;
+
 		loops = LOOPS(READSAFE_TIMEOUT);
-		while (readsafe == 0) {
-			if (loops == 0) {
-				retval = -ETIME;
-				goto done;
-			}
+		while (1) {
 			/* start with setting the semaphores */
-			tmp = readl(&udc->op_regs->usbcmd);
-			tmp |= USBCMD_ATDTW_TRIPWIRE_SET;
-			writel(tmp, &udc->op_regs->usbcmd);
+			usbcmd = readl(&udc->op_regs->usbcmd);
+			usbcmd |= USBCMD_ATDTW_TRIPWIRE_SET;
+			writel(usbcmd, &udc->op_regs->usbcmd);
 
 			/* read the endpoint status */
 			epstatus = readl(&udc->op_regs->epstatus) & bit_pos;
@@ -329,98 +318,46 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
 			 * primed.
 			 */
 			if (readl(&udc->op_regs->usbcmd)
-				& USBCMD_ATDTW_TRIPWIRE_SET) {
-				readsafe = 1;
-			}
+				& USBCMD_ATDTW_TRIPWIRE_SET)
+				break;
+
 			loops--;
+			if (loops == 0) {
+				dev_err(&udc->dev->dev,
+					"Timeout for ATDTW_TRIPWIRE...\n");
+				retval = -ETIME;
+				goto done;
+			}
 			udelay(LOOPS_USEC);
 		}
 
 		/* Clear the semaphore */
-		tmp = readl(&udc->op_regs->usbcmd);
-		tmp &= USBCMD_ATDTW_TRIPWIRE_CLEAR;
-		writel(tmp, &udc->op_regs->usbcmd);
-
-		/* If endpoint is not active, we activate it now. */
-		if (!epstatus) {
-			if (direction == EP_DIR_IN) {
-				struct mv_dtd *curr_dtd = dma_to_virt(
-					&udc->dev->dev, dqh->curr_dtd_ptr);
-
-				loops = LOOPS(DTD_TIMEOUT);
-				while (curr_dtd->size_ioc_sts
-					& DTD_STATUS_ACTIVE) {
-					if (loops == 0) {
-						retval = -ETIME;
-						goto done;
-					}
-					loops--;
-					udelay(LOOPS_USEC);
-				}
-			}
-			/* No other transfers on the queue */
+		usbcmd = readl(&udc->op_regs->usbcmd);
+		usbcmd &= USBCMD_ATDTW_TRIPWIRE_CLEAR;
+		writel(usbcmd, &udc->op_regs->usbcmd);
 
-			/* Write dQH next pointer and terminate bit to 0 */
-			dqh->next_dtd_ptr = req->head->td_dma
-				& EP_QUEUE_HEAD_NEXT_POINTER_MASK;
-			dqh->size_ioc_int_sts = 0;
+		if (epstatus)
+			goto done;
+	}
 
-			/*
-			 * Ensure that updates to the QH will
-			 * occur before priming.
-			 */
-			wmb();
+	/* Write dQH next pointer and terminate bit to 0 */
+	dqh->next_dtd_ptr = req->head->td_dma
+				& EP_QUEUE_HEAD_NEXT_POINTER_MASK;
 
-			/* Prime the Endpoint */
-			writel(bit_pos, &udc->op_regs->epprime);
-		}
-	} else {
-		/* Write dQH next pointer and terminate bit to 0 */
-		dqh->next_dtd_ptr = req->head->td_dma
-			& EP_QUEUE_HEAD_NEXT_POINTER_MASK;
-		dqh->size_ioc_int_sts = 0;
+	/* clear active and halt bit, in case set from a previous error */
+	dqh->size_ioc_int_sts &= ~(DTD_STATUS_ACTIVE | DTD_STATUS_HALTED);
 
-		/* Ensure that updates to the QH will occur before priming. */
-		wmb();
+	/* Ensure that updates to the QH will occure before priming. */
+	wmb();
 
-		/* Prime the Endpoint */
-		writel(bit_pos, &udc->op_regs->epprime);
+	/* Prime the Endpoint */
+	writel(bit_pos, &udc->op_regs->epprime);
 
-		if (direction == EP_DIR_IN) {
-			/* FIXME add status check after prime the IN ep */
-			int prime_again;
-			u32 curr_dtd_ptr = dqh->curr_dtd_ptr;
-
-			loops = LOOPS(DTD_TIMEOUT);
-			prime_again = 0;
-			while ((curr_dtd_ptr != req->head->td_dma)) {
-				curr_dtd_ptr = dqh->curr_dtd_ptr;
-				if (loops == 0) {
-					dev_err(&udc->dev->dev,
-						"failed to prime %s\n",
-						ep->name);
-					retval = -ETIME;
-					goto done;
-				}
-				loops--;
-				udelay(LOOPS_USEC);
-
-				if (loops == (LOOPS(DTD_TIMEOUT) >> 2)) {
-					if (prime_again)
-						goto done;
-					dev_info(&udc->dev->dev,
-						"prime again\n");
-					writel(bit_pos,
-						&udc->op_regs->epprime);
-					prime_again = 1;
-				}
-			}
-		}
-	}
 done:
 	return retval;
 }
 
+
 static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length,
 		dma_addr_t *dma, int *is_last)
 {
@@ -841,6 +778,27 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	return 0;
 }
 
+static void mv_prime_ep(struct mv_ep *ep, struct mv_req *req)
+{
+	struct mv_dqh *dqh = ep->dqh;
+	u32 bit_pos;
+
+	/* Write dQH next pointer and terminate bit to 0 */
+	dqh->next_dtd_ptr = req->head->td_dma
+		& EP_QUEUE_HEAD_NEXT_POINTER_MASK;
+
+	/* clear active and halt bit, in case set from a previous error */
+	dqh->size_ioc_int_sts &= ~(DTD_STATUS_ACTIVE | DTD_STATUS_HALTED);
+
+	/* Ensure that updates to the QH will occure before priming. */
+	wmb();
+
+	bit_pos = 1 << (((ep_dir(ep) == EP_DIR_OUT) ? 0 : 16) + ep->ep_num);
+
+	/* Prime the Endpoint */
+	writel(bit_pos, &ep->udc->op_regs->epprime);
+}
+
 /* dequeues (cancels, unlinks) an I/O request from an endpoint */
 static int mv_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 {
@@ -883,15 +841,13 @@ static int mv_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 
 		/* The request isn't the last request in this ep queue */
 		if (req->queue.next != &ep->queue) {
-			struct mv_dqh *qh;
 			struct mv_req *next_req;
 
-			qh = ep->dqh;
-			next_req = list_entry(req->queue.next, struct mv_req,
-					queue);
+			next_req = list_entry(req->queue.next,
+				struct mv_req, queue);
 
 			/* Point the QH to the first TD of next request */
-			writel((u32) next_req->head, &qh->curr_dtd_ptr);
+			mv_prime_ep(ep, next_req);
 		} else {
 			struct mv_dqh *qh;
 
@@ -1196,7 +1152,7 @@ static int mv_udc_get_frame(struct usb_gadget *gadget)
 
 	udc = container_of(gadget, struct mv_udc, gadget);
 
-	retval = readl(udc->op_regs->frindex) & USB_FRINDEX_MASKS;
+	retval = readl(&udc->op_regs->frindex) & USB_FRINDEX_MASKS;
 
 	return retval;
 }
@@ -2172,11 +2128,9 @@ static int __devexit mv_udc_remove(struct platform_device *dev)
 
 	if (udc->cap_regs)
 		iounmap(udc->cap_regs);
-	udc->cap_regs = NULL;
 
 	if (udc->phy_regs)
-		iounmap((void *)udc->phy_regs);
-	udc->phy_regs = 0;
+		iounmap(udc->phy_regs);
 
 	if (udc->status_req) {
 		kfree(udc->status_req->req.buf);
@@ -2261,8 +2215,8 @@ static int __devinit mv_udc_probe(struct platform_device *dev)
 		goto err_iounmap_capreg;
 	}
 
-	udc->phy_regs = (unsigned int)ioremap(r->start, resource_size(r));
-	if (udc->phy_regs == 0) {
+	udc->phy_regs = ioremap(r->start, resource_size(r));
+	if (udc->phy_regs == NULL) {
 		dev_err(&dev->dev, "failed to map phy I/O memory\n");
 		retval = -EBUSY;
 		goto err_iounmap_capreg;
@@ -2273,7 +2227,8 @@ static int __devinit mv_udc_probe(struct platform_device *dev)
 	if (retval)
 		goto err_iounmap_phyreg;
 
-	udc->op_regs = (struct mv_op_regs __iomem *)((u32)udc->cap_regs
+	udc->op_regs =
+		(struct mv_op_regs __iomem *)((unsigned long)udc->cap_regs
 		+ (readl(&udc->cap_regs->caplength_hciversion)
 			& CAPLENGTH_MASK));
 	udc->max_eps = readl(&udc->cap_regs->dccparams) & DCCPARAMS_DEN_MASK;
@@ -2433,7 +2388,7 @@ err_free_dma:
 err_disable_clock:
 	mv_udc_disable_internal(udc);
 err_iounmap_phyreg:
-	iounmap((void *)udc->phy_regs);
+	iounmap(udc->phy_regs);
 err_iounmap_capreg:
 	iounmap(udc->cap_regs);
 err_put_clk:
@@ -2524,7 +2479,7 @@ static struct platform_driver udc_driver = {
 	.shutdown	= mv_udc_shutdown,
 	.driver		= {
 		.owner	= THIS_MODULE,
-		.name	= "pxa-u2o",
+		.name	= "mv-udc",
 #ifdef CONFIG_PM
 		.pm	= &mv_udc_pm_ops,
 #endif
@@ -2532,9 +2487,8 @@ static struct platform_driver udc_driver = {
 };
 
 module_platform_driver(udc_driver);
-
+MODULE_ALIAS("platform:mv-udc");
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR("Chao Xie <chao.xie@marvell.com>");
 MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:pxa-u2o");
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index 6f2a0419350d..df8661d266cb 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -28,9 +28,10 @@
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
 #include <linux/prefetch.h>
+#include <linux/platform_data/s3c-hsudc.h>
+#include <linux/regulator/consumer.h>
 
 #include <mach/regs-s3c2443-clock.h>
-#include <plat/udc.h>
 
 #define S3C_HSUDC_REG(x)	(x)
 
@@ -87,6 +88,12 @@
 #define DATA_STATE_XMIT			(1)
 #define DATA_STATE_RECV			(2)
 
+static const char * const s3c_hsudc_supply_names[] = {
+	"vdda",		/* analog phy supply, 3.3V */
+	"vddi",		/* digital phy supply, 1.2V */
+	"vddosc",	/* oscillator supply, 1.8V - 3.3V */
+};
+
 /**
  * struct s3c_hsudc_ep - Endpoint representation used by driver.
  * @ep: USB gadget layer representation of device endpoint.
@@ -139,6 +146,7 @@ struct s3c_hsudc {
 	struct device *dev;
 	struct s3c24xx_hsudc_platdata *pd;
 	struct otg_transceiver *transceiver;
+	struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsudc_supply_names)];
 	spinlock_t lock;
 	void __iomem *regs;
 	struct resource *mem_rsrc;
@@ -153,7 +161,6 @@ struct s3c_hsudc {
 #define ep_index(_ep)		((_ep)->bEndpointAddress & \
 					USB_ENDPOINT_NUMBER_MASK)
 
-static struct s3c_hsudc *the_controller;
 static const char driver_name[] = "s3c-udc";
 static const char ep0name[] = "ep0-control";
 
@@ -282,8 +289,7 @@ static void s3c_hsudc_nuke_ep(struct s3c_hsudc_ep *hsep, int status)
  * All the endpoints are stopped and any pending transfer requests if any on
  * the endpoint are terminated.
  */
-static void s3c_hsudc_stop_activity(struct s3c_hsudc *hsudc,
-			  struct usb_gadget_driver *driver)
+static void s3c_hsudc_stop_activity(struct s3c_hsudc *hsudc)
 {
 	struct s3c_hsudc_ep *hsep;
 	int epnum;
@@ -295,10 +301,6 @@ static void s3c_hsudc_stop_activity(struct s3c_hsudc *hsudc,
 		hsep->stopped = 1;
 		s3c_hsudc_nuke_ep(hsep, -ESHUTDOWN);
 	}
-
-	spin_unlock(&hsudc->lock);
-	driver->disconnect(&hsudc->gadget);
-	spin_lock(&hsudc->lock);
 }
 
 /**
@@ -1135,16 +1137,15 @@ static irqreturn_t s3c_hsudc_irq(int irq, void *_dev)
 	return IRQ_HANDLED;
 }
 
-static int s3c_hsudc_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+static int s3c_hsudc_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct s3c_hsudc *hsudc = the_controller;
+	struct s3c_hsudc *hsudc = to_hsudc(gadget);
 	int ret;
 
 	if (!driver
 		|| driver->max_speed < USB_SPEED_FULL
-		|| !bind
-		|| !driver->unbind || !driver->disconnect || !driver->setup)
+		|| !driver->setup)
 		return -EINVAL;
 
 	if (!hsudc)
@@ -1155,21 +1156,12 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver,
 
 	hsudc->driver = driver;
 	hsudc->gadget.dev.driver = &driver->driver;
-	hsudc->gadget.speed = USB_SPEED_UNKNOWN;
-	ret = device_add(&hsudc->gadget.dev);
-	if (ret) {
-		dev_err(hsudc->dev, "failed to probe gadget device");
-		return ret;
-	}
-
-	ret = bind(&hsudc->gadget);
-	if (ret) {
-		dev_err(hsudc->dev, "%s: bind failed\n", hsudc->gadget.name);
-		device_del(&hsudc->gadget.dev);
 
-		hsudc->driver = NULL;
-		hsudc->gadget.dev.driver = NULL;
-		return ret;
+	ret = regulator_bulk_enable(ARRAY_SIZE(hsudc->supplies),
+				    hsudc->supplies);
+	if (ret != 0) {
+		dev_err(hsudc->dev, "failed to enable supplies: %d\n", ret);
+		goto err_supplies;
 	}
 
 	/* connect to bus through transceiver */
@@ -1178,13 +1170,7 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver,
 		if (ret) {
 			dev_err(hsudc->dev, "%s: can't bind to transceiver\n",
 					hsudc->gadget.name);
-			driver->unbind(&hsudc->gadget);
-
-			device_del(&hsudc->gadget.dev);
-
-			hsudc->driver = NULL;
-			hsudc->gadget.dev.driver = NULL;
-			return ret;
+			goto err_otg;
 		}
 	}
 
@@ -1197,34 +1183,43 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver,
 		hsudc->pd->gpio_init();
 
 	return 0;
+err_otg:
+	regulator_bulk_disable(ARRAY_SIZE(hsudc->supplies), hsudc->supplies);
+err_supplies:
+	hsudc->driver = NULL;
+	hsudc->gadget.dev.driver = NULL;
+	return ret;
 }
 
-static int s3c_hsudc_stop(struct usb_gadget_driver *driver)
+static int s3c_hsudc_stop(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct s3c_hsudc *hsudc = the_controller;
+	struct s3c_hsudc *hsudc = to_hsudc(gadget);
 	unsigned long flags;
 
 	if (!hsudc)
 		return -ENODEV;
 
-	if (!driver || driver != hsudc->driver || !driver->unbind)
+	if (!driver || driver != hsudc->driver)
 		return -EINVAL;
 
 	spin_lock_irqsave(&hsudc->lock, flags);
-	hsudc->driver = 0;
+	hsudc->driver = NULL;
+	hsudc->gadget.dev.driver = NULL;
+	hsudc->gadget.speed = USB_SPEED_UNKNOWN;
 	s3c_hsudc_uninit_phy();
 	if (hsudc->pd->gpio_uninit)
 		hsudc->pd->gpio_uninit();
-	s3c_hsudc_stop_activity(hsudc, driver);
+	s3c_hsudc_stop_activity(hsudc);
 	spin_unlock_irqrestore(&hsudc->lock, flags);
 
 	if (hsudc->transceiver)
 		(void) otg_set_peripheral(hsudc->transceiver, NULL);
 
-	driver->unbind(&hsudc->gadget);
-	device_del(&hsudc->gadget.dev);
 	disable_irq(hsudc->irq);
 
+	regulator_bulk_disable(ARRAY_SIZE(hsudc->supplies), hsudc->supplies);
+
 	dev_info(hsudc->dev, "unregistered gadget driver '%s'\n",
 			driver->driver.name);
 	return 0;
@@ -1242,7 +1237,7 @@ static int s3c_hsudc_gadget_getframe(struct usb_gadget *gadget)
 
 static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 {
-	struct s3c_hsudc *hsudc = the_controller;
+	struct s3c_hsudc *hsudc = to_hsudc(gadget);
 
 	if (!hsudc)
 		return -ENODEV;
@@ -1255,18 +1250,18 @@ static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 
 static struct usb_gadget_ops s3c_hsudc_gadget_ops = {
 	.get_frame	= s3c_hsudc_gadget_getframe,
-	.start		= s3c_hsudc_start,
-	.stop		= s3c_hsudc_stop,
+	.udc_start	= s3c_hsudc_start,
+	.udc_stop	= s3c_hsudc_stop,
 	.vbus_draw	= s3c_hsudc_vbus_draw,
 };
 
-static int s3c_hsudc_probe(struct platform_device *pdev)
+static int __devinit s3c_hsudc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct resource *res;
 	struct s3c_hsudc *hsudc;
 	struct s3c24xx_hsudc_platdata *pd = pdev->dev.platform_data;
-	int ret;
+	int ret, i;
 
 	hsudc = kzalloc(sizeof(struct s3c_hsudc) +
 			sizeof(struct s3c_hsudc_ep) * pd->epnum,
@@ -1276,13 +1271,22 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	the_controller = hsudc;
 	platform_set_drvdata(pdev, dev);
 	hsudc->dev = dev;
 	hsudc->pd = pdev->dev.platform_data;
 
 	hsudc->transceiver = otg_get_transceiver();
 
+	for (i = 0; i < ARRAY_SIZE(hsudc->supplies); i++)
+		hsudc->supplies[i].supply = s3c_hsudc_supply_names[i];
+
+	ret = regulator_bulk_get(dev, ARRAY_SIZE(hsudc->supplies),
+				 hsudc->supplies);
+	if (ret != 0) {
+		dev_err(dev, "failed to request supplies: %d\n", ret);
+		goto err_supplies;
+	}
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(dev, "unable to obtain driver resource data\n");
@@ -1307,7 +1311,6 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 
 	spin_lock_init(&hsudc->lock);
 
-	device_initialize(&hsudc->gadget.dev);
 	dev_set_name(&hsudc->gadget.dev, "gadget");
 
 	hsudc->gadget.max_speed = USB_SPEED_HIGH;
@@ -1319,6 +1322,7 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 
 	hsudc->gadget.is_otg = 0;
 	hsudc->gadget.is_a_peripheral = 0;
+	hsudc->gadget.speed = USB_SPEED_UNKNOWN;
 
 	s3c_hsudc_setup_ep(hsudc);
 
@@ -1348,12 +1352,20 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 	disable_irq(hsudc->irq);
 	local_irq_enable();
 
+	ret = device_register(&hsudc->gadget.dev);
+	if (ret) {
+		put_device(&hsudc->gadget.dev);
+		goto err_add_device;
+	}
+
 	ret = usb_add_gadget_udc(&pdev->dev, &hsudc->gadget);
 	if (ret)
 		goto err_add_udc;
 
 	return 0;
 err_add_udc:
+	device_unregister(&hsudc->gadget.dev);
+err_add_device:
 	clk_disable(hsudc->uclk);
 	clk_put(hsudc->uclk);
 err_clk:
@@ -1362,10 +1374,13 @@ err_irq:
 	iounmap(hsudc->regs);
 
 err_remap:
-	release_resource(hsudc->mem_rsrc);
-	kfree(hsudc->mem_rsrc);
-
+	release_mem_region(res->start, resource_size(res));
 err_res:
+	if (hsudc->transceiver)
+		otg_put_transceiver(hsudc->transceiver);
+
+	regulator_bulk_free(ARRAY_SIZE(hsudc->supplies), hsudc->supplies);
+err_supplies:
 	kfree(hsudc);
 	return ret;
 }
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 060e0e2b1ae6..a52769b5c904 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -194,6 +194,15 @@ config USB_EHCI_S5P
        help
 	 Enable support for the S5P SOC's on-chip EHCI controller.
 
+config USB_EHCI_MV
+	bool "EHCI support for Marvell on-chip controller"
+	depends on USB_EHCI_HCD
+	select USB_EHCI_ROOT_HUB_TT
+	---help---
+	  Enables support for Marvell (including PXA and MMP series) on-chip
+	  USB SPH and OTG controller. SPH is a single port host, and it can
+	  only be EHCI host. OTG is controller that can switch to host mode.
+
 config USB_W90X900_EHCI
 	bool "W90X900(W90P910) EHCI support"
 	depends on USB_EHCI_HCD && ARCH_W90X900
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index c4c76ab204c1..e311a511529b 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1371,6 +1371,11 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ehci_xls_driver
 #endif
 
+#ifdef CONFIG_USB_EHCI_MV
+#include "ehci-mv.c"
+#define        PLATFORM_DRIVER         ehci_mv_driver
+#endif
+
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
     !defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
new file mode 100644
index 000000000000..52a604fb9321
--- /dev/null
+++ b/drivers/usb/host/ehci-mv.c
@@ -0,0 +1,391 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ * Author: Chao Xie <chao.xie@marvell.com>
+ *        Neil Zhang <zhangwm@marvell.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/usb/otg.h>
+#include <linux/platform_data/mv_usb.h>
+
+#define CAPLENGTH_MASK         (0xff)
+
+struct ehci_hcd_mv {
+	struct usb_hcd *hcd;
+
+	/* Which mode does this ehci running OTG/Host ? */
+	int mode;
+
+	void __iomem *phy_regs;
+	void __iomem *cap_regs;
+	void __iomem *op_regs;
+
+	struct otg_transceiver *otg;
+
+	struct mv_usb_platform_data *pdata;
+
+	/* clock source and total clock number */
+	unsigned int clknum;
+	struct clk *clk[0];
+};
+
+static void ehci_clock_enable(struct ehci_hcd_mv *ehci_mv)
+{
+	unsigned int i;
+
+	for (i = 0; i < ehci_mv->clknum; i++)
+		clk_enable(ehci_mv->clk[i]);
+}
+
+static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv)
+{
+	unsigned int i;
+
+	for (i = 0; i < ehci_mv->clknum; i++)
+		clk_disable(ehci_mv->clk[i]);
+}
+
+static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv)
+{
+	int retval;
+
+	ehci_clock_enable(ehci_mv);
+	if (ehci_mv->pdata->phy_init) {
+		retval = ehci_mv->pdata->phy_init(ehci_mv->phy_regs);
+		if (retval)
+			return retval;
+	}
+
+	return 0;
+}
+
+static void mv_ehci_disable(struct ehci_hcd_mv *ehci_mv)
+{
+	if (ehci_mv->pdata->phy_deinit)
+		ehci_mv->pdata->phy_deinit(ehci_mv->phy_regs);
+	ehci_clock_disable(ehci_mv);
+}
+
+static int mv_ehci_reset(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	struct device *dev = hcd->self.controller;
+	struct ehci_hcd_mv *ehci_mv = dev_get_drvdata(dev);
+	int retval;
+
+	if (ehci_mv == NULL) {
+		dev_err(dev, "Can not find private ehci data\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * data structure init
+	 */
+	retval = ehci_init(hcd);
+	if (retval) {
+		dev_err(dev, "ehci_init failed %d\n", retval);
+		return retval;
+	}
+
+	hcd->has_tt = 1;
+	ehci->sbrn = 0x20;
+
+	retval = ehci_reset(ehci);
+	if (retval) {
+		dev_err(dev, "ehci_reset failed %d\n", retval);
+		return retval;
+	}
+
+	return 0;
+}
+
+static const struct hc_driver mv_ehci_hc_driver = {
+	.description = hcd_name,
+	.product_desc = "Marvell EHCI",
+	.hcd_priv_size = sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq = ehci_irq,
+	.flags = HCD_MEMORY | HCD_USB2,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset = mv_ehci_reset,
+	.start = ehci_run,
+	.stop = ehci_stop,
+	.shutdown = ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue = ehci_urb_enqueue,
+	.urb_dequeue = ehci_urb_dequeue,
+	.endpoint_disable = ehci_endpoint_disable,
+	.endpoint_reset = ehci_endpoint_reset,
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number = ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data = ehci_hub_status_data,
+	.hub_control = ehci_hub_control,
+	.bus_suspend = ehci_bus_suspend,
+	.bus_resume = ehci_bus_resume,
+};
+
+static int mv_ehci_probe(struct platform_device *pdev)
+{
+	struct mv_usb_platform_data *pdata = pdev->dev.platform_data;
+	struct usb_hcd *hcd;
+	struct ehci_hcd *ehci;
+	struct ehci_hcd_mv *ehci_mv;
+	struct resource *r;
+	int clk_i, retval = -ENODEV;
+	u32 offset;
+	size_t size;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "missing platform_data\n");
+		return -ENODEV;
+	}
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	hcd = usb_create_hcd(&mv_ehci_hc_driver, &pdev->dev, "mv ehci");
+	if (!hcd)
+		return -ENOMEM;
+
+	size = sizeof(*ehci_mv) + sizeof(struct clk *) * pdata->clknum;
+	ehci_mv = kzalloc(size, GFP_KERNEL);
+	if (ehci_mv == NULL) {
+		dev_err(&pdev->dev, "cannot allocate ehci_hcd_mv\n");
+		retval = -ENOMEM;
+		goto err_put_hcd;
+	}
+
+	platform_set_drvdata(pdev, ehci_mv);
+	ehci_mv->pdata = pdata;
+	ehci_mv->hcd = hcd;
+
+	ehci_mv->clknum = pdata->clknum;
+	for (clk_i = 0; clk_i < ehci_mv->clknum; clk_i++) {
+		ehci_mv->clk[clk_i] =
+		    clk_get(&pdev->dev, pdata->clkname[clk_i]);
+		if (IS_ERR(ehci_mv->clk[clk_i])) {
+			dev_err(&pdev->dev, "error get clck \"%s\"\n",
+				pdata->clkname[clk_i]);
+			retval = PTR_ERR(ehci_mv->clk[clk_i]);
+			goto err_put_clk;
+		}
+	}
+
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phyregs");
+	if (r == NULL) {
+		dev_err(&pdev->dev, "no phy I/O memory resource defined\n");
+		retval = -ENODEV;
+		goto err_put_clk;
+	}
+
+	ehci_mv->phy_regs = ioremap(r->start, resource_size(r));
+	if (ehci_mv->phy_regs == 0) {
+		dev_err(&pdev->dev, "failed to map phy I/O memory\n");
+		retval = -EFAULT;
+		goto err_put_clk;
+	}
+
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "capregs");
+	if (!r) {
+		dev_err(&pdev->dev, "no I/O memory resource defined\n");
+		retval = -ENODEV;
+		goto err_iounmap_phyreg;
+	}
+
+	ehci_mv->cap_regs = ioremap(r->start, resource_size(r));
+	if (ehci_mv->cap_regs == NULL) {
+		dev_err(&pdev->dev, "failed to map I/O memory\n");
+		retval = -EFAULT;
+		goto err_iounmap_phyreg;
+	}
+
+	retval = mv_ehci_enable(ehci_mv);
+	if (retval) {
+		dev_err(&pdev->dev, "init phy error %d\n", retval);
+		goto err_iounmap_capreg;
+	}
+
+	offset = readl(ehci_mv->cap_regs) & CAPLENGTH_MASK;
+	ehci_mv->op_regs =
+		(void __iomem *) ((unsigned long) ehci_mv->cap_regs + offset);
+
+	hcd->rsrc_start = r->start;
+	hcd->rsrc_len = r->end - r->start + 1;
+	hcd->regs = ehci_mv->op_regs;
+
+	hcd->irq = platform_get_irq(pdev, 0);
+	if (!hcd->irq) {
+		dev_err(&pdev->dev, "Cannot get irq.");
+		retval = -ENODEV;
+		goto err_disable_clk;
+	}
+
+	ehci = hcd_to_ehci(hcd);
+	ehci->caps = (struct ehci_caps *) ehci_mv->cap_regs;
+	ehci->regs = (struct ehci_regs *) ehci_mv->op_regs;
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+	ehci_mv->mode = pdata->mode;
+	if (ehci_mv->mode == MV_USB_MODE_OTG) {
+#ifdef CONFIG_USB_OTG_UTILS
+		ehci_mv->otg = otg_get_transceiver();
+		if (!ehci_mv->otg) {
+			dev_err(&pdev->dev,
+				"unable to find transceiver\n");
+			retval = -ENODEV;
+			goto err_disable_clk;
+		}
+
+		retval = otg_set_host(ehci_mv->otg, &hcd->self);
+		if (retval < 0) {
+			dev_err(&pdev->dev,
+				"unable to register with transceiver\n");
+			retval = -ENODEV;
+			goto err_put_transceiver;
+		}
+		/* otg will enable clock before use as host */
+		mv_ehci_disable(ehci_mv);
+#else
+		dev_info(&pdev->dev, "MV_USB_MODE_OTG "
+			 "must have CONFIG_USB_OTG_UTILS enabled\n");
+		goto err_disable_clk;
+#endif
+	} else {
+		if (pdata->set_vbus)
+			pdata->set_vbus(1);
+
+		retval = usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
+		if (retval) {
+			dev_err(&pdev->dev,
+				"failed to add hcd with err %d\n", retval);
+			goto err_set_vbus;
+		}
+	}
+
+	if (pdata->private_init)
+		pdata->private_init(ehci_mv->op_regs, ehci_mv->phy_regs);
+
+	dev_info(&pdev->dev,
+		 "successful find EHCI device with regs 0x%p irq %d"
+		 " working in %s mode\n", hcd->regs, hcd->irq,
+		 ehci_mv->mode == MV_USB_MODE_OTG ? "OTG" : "Host");
+
+	return 0;
+
+err_set_vbus:
+	if (pdata->set_vbus)
+		pdata->set_vbus(0);
+#ifdef CONFIG_USB_OTG_UTILS
+err_put_transceiver:
+	if (ehci_mv->otg)
+		otg_put_transceiver(ehci_mv->otg);
+#endif
+err_disable_clk:
+	mv_ehci_disable(ehci_mv);
+err_iounmap_capreg:
+	iounmap(ehci_mv->cap_regs);
+err_iounmap_phyreg:
+	iounmap(ehci_mv->phy_regs);
+err_put_clk:
+	for (clk_i--; clk_i >= 0; clk_i--)
+		clk_put(ehci_mv->clk[clk_i]);
+	platform_set_drvdata(pdev, NULL);
+	kfree(ehci_mv);
+err_put_hcd:
+	usb_put_hcd(hcd);
+
+	return retval;
+}
+
+static int mv_ehci_remove(struct platform_device *pdev)
+{
+	struct ehci_hcd_mv *ehci_mv = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = ehci_mv->hcd;
+	int clk_i;
+
+	if (hcd->rh_registered)
+		usb_remove_hcd(hcd);
+
+	if (ehci_mv->otg) {
+		otg_set_host(ehci_mv->otg, NULL);
+		otg_put_transceiver(ehci_mv->otg);
+	}
+
+	if (ehci_mv->mode == MV_USB_MODE_HOST) {
+		if (ehci_mv->pdata->set_vbus)
+			ehci_mv->pdata->set_vbus(0);
+
+		mv_ehci_disable(ehci_mv);
+	}
+
+	iounmap(ehci_mv->cap_regs);
+	iounmap(ehci_mv->phy_regs);
+
+	for (clk_i = 0; clk_i < ehci_mv->clknum; clk_i++)
+		clk_put(ehci_mv->clk[clk_i]);
+
+	platform_set_drvdata(pdev, NULL);
+
+	kfree(ehci_mv);
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+MODULE_ALIAS("mv-ehci");
+
+static const struct platform_device_id ehci_id_table[] = {
+	{"pxa-u2oehci", PXA_U2OEHCI},
+	{"pxa-sph", PXA_SPH},
+	{"mmp3-hsic", MMP3_HSIC},
+	{"mmp3-fsic", MMP3_FSIC},
+	{},
+};
+
+static void mv_ehci_shutdown(struct platform_device *pdev)
+{
+	struct ehci_hcd_mv *ehci_mv = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = ehci_mv->hcd;
+
+	if (!hcd->rh_registered)
+		return;
+
+	if (hcd->driver->shutdown)
+		hcd->driver->shutdown(hcd);
+}
+
+static struct platform_driver ehci_mv_driver = {
+	.probe = mv_ehci_probe,
+	.remove = mv_ehci_remove,
+	.shutdown = mv_ehci_shutdown,
+	.driver = {
+		   .name = "mv-ehci",
+		   .bus = &platform_bus_type,
+		   },
+	.id_table = ehci_id_table,
+};
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 5e913d72cdab..2a25955881fc 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -130,4 +130,16 @@ config FSL_USB2_OTG
 	help
 	  Enable this to support Freescale USB OTG transceiver.
 
+config USB_MV_OTG
+	tristate "Marvell USB OTG support"
+	depends on USB_MV_UDC
+	select USB_OTG
+	select USB_OTG_UTILS
+	help
+	  Say Y here if you want to build Marvell USB OTG transciever
+	  driver in kernel (including PXA and MMP series). This driver
+	  implements role switch between EHCI host driver and gadget driver.
+
+	  To compile this driver as a module, choose M here.
+
 endif # USB || OTG
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index 566655c53331..b2c5a9598637 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_USB_MSM_OTG)	+= msm_otg.o
 obj-$(CONFIG_AB8500_USB)	+= ab8500-usb.o
 fsl_usb2_otg-objs		:= fsl_otg.o otg_fsm.o
 obj-$(CONFIG_FSL_USB2_OTG)	+= fsl_usb2_otg.o
+obj-$(CONFIG_USB_MV_OTG)	+= mv_otg.o
diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/otg/mv_otg.c
new file mode 100644
index 000000000000..db0d4fcdc8e2
--- /dev/null
+++ b/drivers/usb/otg/mv_otg.c
@@ -0,0 +1,957 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ * Author: Chao Xie <chao.xie@marvell.com>
+ *	   Neil Zhang <zhangwm@marvell.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/device.h>
+#include <linux/proc_fs.h>
+#include <linux/clk.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/hcd.h>
+#include <linux/platform_data/mv_usb.h>
+
+#include "mv_otg.h"
+
+#define	DRIVER_DESC	"Marvell USB OTG transceiver driver"
+#define	DRIVER_VERSION	"Jan 20, 2010"
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+static const char driver_name[] = "mv-otg";
+
+static char *state_string[] = {
+	"undefined",
+	"b_idle",
+	"b_srp_init",
+	"b_peripheral",
+	"b_wait_acon",
+	"b_host",
+	"a_idle",
+	"a_wait_vrise",
+	"a_wait_bcon",
+	"a_host",
+	"a_suspend",
+	"a_peripheral",
+	"a_wait_vfall",
+	"a_vbus_err"
+};
+
+static int mv_otg_set_vbus(struct otg_transceiver *otg, bool on)
+{
+	struct mv_otg *mvotg = container_of(otg, struct mv_otg, otg);
+	if (mvotg->pdata->set_vbus == NULL)
+		return -ENODEV;
+
+	return mvotg->pdata->set_vbus(on);
+}
+
+static int mv_otg_set_host(struct otg_transceiver *otg,
+			   struct usb_bus *host)
+{
+	otg->host = host;
+
+	return 0;
+}
+
+static int mv_otg_set_peripheral(struct otg_transceiver *otg,
+				 struct usb_gadget *gadget)
+{
+	otg->gadget = gadget;
+
+	return 0;
+}
+
+static void mv_otg_run_state_machine(struct mv_otg *mvotg,
+				     unsigned long delay)
+{
+	dev_dbg(&mvotg->pdev->dev, "transceiver is updated\n");
+	if (!mvotg->qwork)
+		return;
+
+	queue_delayed_work(mvotg->qwork, &mvotg->work, delay);
+}
+
+static void mv_otg_timer_await_bcon(unsigned long data)
+{
+	struct mv_otg *mvotg = (struct mv_otg *) data;
+
+	mvotg->otg_ctrl.a_wait_bcon_timeout = 1;
+
+	dev_info(&mvotg->pdev->dev, "B Device No Response!\n");
+
+	if (spin_trylock(&mvotg->wq_lock)) {
+		mv_otg_run_state_machine(mvotg, 0);
+		spin_unlock(&mvotg->wq_lock);
+	}
+}
+
+static int mv_otg_cancel_timer(struct mv_otg *mvotg, unsigned int id)
+{
+	struct timer_list *timer;
+
+	if (id >= OTG_TIMER_NUM)
+		return -EINVAL;
+
+	timer = &mvotg->otg_ctrl.timer[id];
+
+	if (timer_pending(timer))
+		del_timer(timer);
+
+	return 0;
+}
+
+static int mv_otg_set_timer(struct mv_otg *mvotg, unsigned int id,
+			    unsigned long interval,
+			    void (*callback) (unsigned long))
+{
+	struct timer_list *timer;
+
+	if (id >= OTG_TIMER_NUM)
+		return -EINVAL;
+
+	timer = &mvotg->otg_ctrl.timer[id];
+	if (timer_pending(timer)) {
+		dev_err(&mvotg->pdev->dev, "Timer%d is already running\n", id);
+		return -EBUSY;
+	}
+
+	init_timer(timer);
+	timer->data = (unsigned long) mvotg;
+	timer->function = callback;
+	timer->expires = jiffies + interval;
+	add_timer(timer);
+
+	return 0;
+}
+
+static int mv_otg_reset(struct mv_otg *mvotg)
+{
+	unsigned int loops;
+	u32 tmp;
+
+	/* Stop the controller */
+	tmp = readl(&mvotg->op_regs->usbcmd);
+	tmp &= ~USBCMD_RUN_STOP;
+	writel(tmp, &mvotg->op_regs->usbcmd);
+
+	/* Reset the controller to get default values */
+	writel(USBCMD_CTRL_RESET, &mvotg->op_regs->usbcmd);
+
+	loops = 500;
+	while (readl(&mvotg->op_regs->usbcmd) & USBCMD_CTRL_RESET) {
+		if (loops == 0) {
+			dev_err(&mvotg->pdev->dev,
+				"Wait for RESET completed TIMEOUT\n");
+			return -ETIMEDOUT;
+		}
+		loops--;
+		udelay(20);
+	}
+
+	writel(0x0, &mvotg->op_regs->usbintr);
+	tmp = readl(&mvotg->op_regs->usbsts);
+	writel(tmp, &mvotg->op_regs->usbsts);
+
+	return 0;
+}
+
+static void mv_otg_init_irq(struct mv_otg *mvotg)
+{
+	u32 otgsc;
+
+	mvotg->irq_en = OTGSC_INTR_A_SESSION_VALID
+	    | OTGSC_INTR_A_VBUS_VALID;
+	mvotg->irq_status = OTGSC_INTSTS_A_SESSION_VALID
+	    | OTGSC_INTSTS_A_VBUS_VALID;
+
+	if (mvotg->pdata->vbus == NULL) {
+		mvotg->irq_en |= OTGSC_INTR_B_SESSION_VALID
+		    | OTGSC_INTR_B_SESSION_END;
+		mvotg->irq_status |= OTGSC_INTSTS_B_SESSION_VALID
+		    | OTGSC_INTSTS_B_SESSION_END;
+	}
+
+	if (mvotg->pdata->id == NULL) {
+		mvotg->irq_en |= OTGSC_INTR_USB_ID;
+		mvotg->irq_status |= OTGSC_INTSTS_USB_ID;
+	}
+
+	otgsc = readl(&mvotg->op_regs->otgsc);
+	otgsc |= mvotg->irq_en;
+	writel(otgsc, &mvotg->op_regs->otgsc);
+}
+
+static void mv_otg_start_host(struct mv_otg *mvotg, int on)
+{
+	struct otg_transceiver *otg = &mvotg->otg;
+	struct usb_hcd *hcd;
+
+	if (!otg->host)
+		return;
+
+	dev_info(&mvotg->pdev->dev, "%s host\n", on ? "start" : "stop");
+
+	hcd = bus_to_hcd(otg->host);
+
+	if (on)
+		usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
+	else
+		usb_remove_hcd(hcd);
+}
+
+static void mv_otg_start_periphrals(struct mv_otg *mvotg, int on)
+{
+	struct otg_transceiver *otg = &mvotg->otg;
+
+	if (!otg->gadget)
+		return;
+
+	dev_info(otg->dev, "gadget %s\n", on ? "on" : "off");
+
+	if (on)
+		usb_gadget_vbus_connect(otg->gadget);
+	else
+		usb_gadget_vbus_disconnect(otg->gadget);
+}
+
+static void otg_clock_enable(struct mv_otg *mvotg)
+{
+	unsigned int i;
+
+	for (i = 0; i < mvotg->clknum; i++)
+		clk_enable(mvotg->clk[i]);
+}
+
+static void otg_clock_disable(struct mv_otg *mvotg)
+{
+	unsigned int i;
+
+	for (i = 0; i < mvotg->clknum; i++)
+		clk_disable(mvotg->clk[i]);
+}
+
+static int mv_otg_enable_internal(struct mv_otg *mvotg)
+{
+	int retval = 0;
+
+	if (mvotg->active)
+		return 0;
+
+	dev_dbg(&mvotg->pdev->dev, "otg enabled\n");
+
+	otg_clock_enable(mvotg);
+	if (mvotg->pdata->phy_init) {
+		retval = mvotg->pdata->phy_init(mvotg->phy_regs);
+		if (retval) {
+			dev_err(&mvotg->pdev->dev,
+				"init phy error %d\n", retval);
+			otg_clock_disable(mvotg);
+			return retval;
+		}
+	}
+	mvotg->active = 1;
+
+	return 0;
+
+}
+
+static int mv_otg_enable(struct mv_otg *mvotg)
+{
+	if (mvotg->clock_gating)
+		return mv_otg_enable_internal(mvotg);
+
+	return 0;
+}
+
+static void mv_otg_disable_internal(struct mv_otg *mvotg)
+{
+	if (mvotg->active) {
+		dev_dbg(&mvotg->pdev->dev, "otg disabled\n");
+		if (mvotg->pdata->phy_deinit)
+			mvotg->pdata->phy_deinit(mvotg->phy_regs);
+		otg_clock_disable(mvotg);
+		mvotg->active = 0;
+	}
+}
+
+static void mv_otg_disable(struct mv_otg *mvotg)
+{
+	if (mvotg->clock_gating)
+		mv_otg_disable_internal(mvotg);
+}
+
+static void mv_otg_update_inputs(struct mv_otg *mvotg)
+{
+	struct mv_otg_ctrl *otg_ctrl = &mvotg->otg_ctrl;
+	u32 otgsc;
+
+	otgsc = readl(&mvotg->op_regs->otgsc);
+
+	if (mvotg->pdata->vbus) {
+		if (mvotg->pdata->vbus->poll() == VBUS_HIGH) {
+			otg_ctrl->b_sess_vld = 1;
+			otg_ctrl->b_sess_end = 0;
+		} else {
+			otg_ctrl->b_sess_vld = 0;
+			otg_ctrl->b_sess_end = 1;
+		}
+	} else {
+		otg_ctrl->b_sess_vld = !!(otgsc & OTGSC_STS_B_SESSION_VALID);
+		otg_ctrl->b_sess_end = !!(otgsc & OTGSC_STS_B_SESSION_END);
+	}
+
+	if (mvotg->pdata->id)
+		otg_ctrl->id = !!mvotg->pdata->id->poll();
+	else
+		otg_ctrl->id = !!(otgsc & OTGSC_STS_USB_ID);
+
+	if (mvotg->pdata->otg_force_a_bus_req && !otg_ctrl->id)
+		otg_ctrl->a_bus_req = 1;
+
+	otg_ctrl->a_sess_vld = !!(otgsc & OTGSC_STS_A_SESSION_VALID);
+	otg_ctrl->a_vbus_vld = !!(otgsc & OTGSC_STS_A_VBUS_VALID);
+
+	dev_dbg(&mvotg->pdev->dev, "%s: ", __func__);
+	dev_dbg(&mvotg->pdev->dev, "id %d\n", otg_ctrl->id);
+	dev_dbg(&mvotg->pdev->dev, "b_sess_vld %d\n", otg_ctrl->b_sess_vld);
+	dev_dbg(&mvotg->pdev->dev, "b_sess_end %d\n", otg_ctrl->b_sess_end);
+	dev_dbg(&mvotg->pdev->dev, "a_vbus_vld %d\n", otg_ctrl->a_vbus_vld);
+	dev_dbg(&mvotg->pdev->dev, "a_sess_vld %d\n", otg_ctrl->a_sess_vld);
+}
+
+static void mv_otg_update_state(struct mv_otg *mvotg)
+{
+	struct mv_otg_ctrl *otg_ctrl = &mvotg->otg_ctrl;
+	struct otg_transceiver *otg = &mvotg->otg;
+	int old_state = otg->state;
+
+	switch (old_state) {
+	case OTG_STATE_UNDEFINED:
+		otg->state = OTG_STATE_B_IDLE;
+		/* FALL THROUGH */
+	case OTG_STATE_B_IDLE:
+		if (otg_ctrl->id == 0)
+			otg->state = OTG_STATE_A_IDLE;
+		else if (otg_ctrl->b_sess_vld)
+			otg->state = OTG_STATE_B_PERIPHERAL;
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		if (!otg_ctrl->b_sess_vld || otg_ctrl->id == 0)
+			otg->state = OTG_STATE_B_IDLE;
+		break;
+	case OTG_STATE_A_IDLE:
+		if (otg_ctrl->id)
+			otg->state = OTG_STATE_B_IDLE;
+		else if (!(otg_ctrl->a_bus_drop) &&
+			 (otg_ctrl->a_bus_req || otg_ctrl->a_srp_det))
+			otg->state = OTG_STATE_A_WAIT_VRISE;
+		break;
+	case OTG_STATE_A_WAIT_VRISE:
+		if (otg_ctrl->a_vbus_vld)
+			otg->state = OTG_STATE_A_WAIT_BCON;
+		break;
+	case OTG_STATE_A_WAIT_BCON:
+		if (otg_ctrl->id || otg_ctrl->a_bus_drop
+		    || otg_ctrl->a_wait_bcon_timeout) {
+			mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER);
+			mvotg->otg_ctrl.a_wait_bcon_timeout = 0;
+			otg->state = OTG_STATE_A_WAIT_VFALL;
+			otg_ctrl->a_bus_req = 0;
+		} else if (!otg_ctrl->a_vbus_vld) {
+			mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER);
+			mvotg->otg_ctrl.a_wait_bcon_timeout = 0;
+			otg->state = OTG_STATE_A_VBUS_ERR;
+		} else if (otg_ctrl->b_conn) {
+			mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER);
+			mvotg->otg_ctrl.a_wait_bcon_timeout = 0;
+			otg->state = OTG_STATE_A_HOST;
+		}
+		break;
+	case OTG_STATE_A_HOST:
+		if (otg_ctrl->id || !otg_ctrl->b_conn
+		    || otg_ctrl->a_bus_drop)
+			otg->state = OTG_STATE_A_WAIT_BCON;
+		else if (!otg_ctrl->a_vbus_vld)
+			otg->state = OTG_STATE_A_VBUS_ERR;
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		if (otg_ctrl->id
+		    || (!otg_ctrl->b_conn && otg_ctrl->a_sess_vld)
+		    || otg_ctrl->a_bus_req)
+			otg->state = OTG_STATE_A_IDLE;
+		break;
+	case OTG_STATE_A_VBUS_ERR:
+		if (otg_ctrl->id || otg_ctrl->a_clr_err
+		    || otg_ctrl->a_bus_drop) {
+			otg_ctrl->a_clr_err = 0;
+			otg->state = OTG_STATE_A_WAIT_VFALL;
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static void mv_otg_work(struct work_struct *work)
+{
+	struct mv_otg *mvotg;
+	struct otg_transceiver *otg;
+	int old_state;
+
+	mvotg = container_of((struct delayed_work *)work, struct mv_otg, work);
+
+run:
+	/* work queue is single thread, or we need spin_lock to protect */
+	otg = &mvotg->otg;
+	old_state = otg->state;
+
+	if (!mvotg->active)
+		return;
+
+	mv_otg_update_inputs(mvotg);
+	mv_otg_update_state(mvotg);
+
+	if (old_state != otg->state) {
+		dev_info(&mvotg->pdev->dev, "change from state %s to %s\n",
+			 state_string[old_state],
+			 state_string[otg->state]);
+
+		switch (otg->state) {
+		case OTG_STATE_B_IDLE:
+			mvotg->otg.default_a = 0;
+			if (old_state == OTG_STATE_B_PERIPHERAL)
+				mv_otg_start_periphrals(mvotg, 0);
+			mv_otg_reset(mvotg);
+			mv_otg_disable(mvotg);
+			break;
+		case OTG_STATE_B_PERIPHERAL:
+			mv_otg_enable(mvotg);
+			mv_otg_start_periphrals(mvotg, 1);
+			break;
+		case OTG_STATE_A_IDLE:
+			mvotg->otg.default_a = 1;
+			mv_otg_enable(mvotg);
+			if (old_state == OTG_STATE_A_WAIT_VFALL)
+				mv_otg_start_host(mvotg, 0);
+			mv_otg_reset(mvotg);
+			break;
+		case OTG_STATE_A_WAIT_VRISE:
+			mv_otg_set_vbus(&mvotg->otg, 1);
+			break;
+		case OTG_STATE_A_WAIT_BCON:
+			if (old_state != OTG_STATE_A_HOST)
+				mv_otg_start_host(mvotg, 1);
+			mv_otg_set_timer(mvotg, A_WAIT_BCON_TIMER,
+					 T_A_WAIT_BCON,
+					 mv_otg_timer_await_bcon);
+			/*
+			 * Now, we directly enter A_HOST. So set b_conn = 1
+			 * here. In fact, it need host driver to notify us.
+			 */
+			mvotg->otg_ctrl.b_conn = 1;
+			break;
+		case OTG_STATE_A_HOST:
+			break;
+		case OTG_STATE_A_WAIT_VFALL:
+			/*
+			 * Now, we has exited A_HOST. So set b_conn = 0
+			 * here. In fact, it need host driver to notify us.
+			 */
+			mvotg->otg_ctrl.b_conn = 0;
+			mv_otg_set_vbus(&mvotg->otg, 0);
+			break;
+		case OTG_STATE_A_VBUS_ERR:
+			break;
+		default:
+			break;
+		}
+		goto run;
+	}
+}
+
+static irqreturn_t mv_otg_irq(int irq, void *dev)
+{
+	struct mv_otg *mvotg = dev;
+	u32 otgsc;
+
+	otgsc = readl(&mvotg->op_regs->otgsc);
+	writel(otgsc, &mvotg->op_regs->otgsc);
+
+	/*
+	 * if we have vbus, then the vbus detection for B-device
+	 * will be done by mv_otg_inputs_irq().
+	 */
+	if (mvotg->pdata->vbus)
+		if ((otgsc & OTGSC_STS_USB_ID) &&
+		    !(otgsc & OTGSC_INTSTS_USB_ID))
+			return IRQ_NONE;
+
+	if ((otgsc & mvotg->irq_status) == 0)
+		return IRQ_NONE;
+
+	mv_otg_run_state_machine(mvotg, 0);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t mv_otg_inputs_irq(int irq, void *dev)
+{
+	struct mv_otg *mvotg = dev;
+
+	/* The clock may disabled at this time */
+	if (!mvotg->active) {
+		mv_otg_enable(mvotg);
+		mv_otg_init_irq(mvotg);
+	}
+
+	mv_otg_run_state_machine(mvotg, 0);
+
+	return IRQ_HANDLED;
+}
+
+static ssize_t
+get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct mv_otg *mvotg = dev_get_drvdata(dev);
+	return scnprintf(buf, PAGE_SIZE, "%d\n",
+			 mvotg->otg_ctrl.a_bus_req);
+}
+
+static ssize_t
+set_a_bus_req(struct device *dev, struct device_attribute *attr,
+	      const char *buf, size_t count)
+{
+	struct mv_otg *mvotg = dev_get_drvdata(dev);
+
+	if (count > 2)
+		return -1;
+
+	/* We will use this interface to change to A device */
+	if (mvotg->otg.state != OTG_STATE_B_IDLE
+	    && mvotg->otg.state != OTG_STATE_A_IDLE)
+		return -1;
+
+	/* The clock may disabled and we need to set irq for ID detected */
+	mv_otg_enable(mvotg);
+	mv_otg_init_irq(mvotg);
+
+	if (buf[0] == '1') {
+		mvotg->otg_ctrl.a_bus_req = 1;
+		mvotg->otg_ctrl.a_bus_drop = 0;
+		dev_dbg(&mvotg->pdev->dev,
+			"User request: a_bus_req = 1\n");
+
+		if (spin_trylock(&mvotg->wq_lock)) {
+			mv_otg_run_state_machine(mvotg, 0);
+			spin_unlock(&mvotg->wq_lock);
+		}
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUSR, get_a_bus_req,
+		   set_a_bus_req);
+
+static ssize_t
+set_a_clr_err(struct device *dev, struct device_attribute *attr,
+	      const char *buf, size_t count)
+{
+	struct mv_otg *mvotg = dev_get_drvdata(dev);
+	if (!mvotg->otg.default_a)
+		return -1;
+
+	if (count > 2)
+		return -1;
+
+	if (buf[0] == '1') {
+		mvotg->otg_ctrl.a_clr_err = 1;
+		dev_dbg(&mvotg->pdev->dev,
+			"User request: a_clr_err = 1\n");
+	}
+
+	if (spin_trylock(&mvotg->wq_lock)) {
+		mv_otg_run_state_machine(mvotg, 0);
+		spin_unlock(&mvotg->wq_lock);
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR(a_clr_err, S_IWUSR, NULL, set_a_clr_err);
+
+static ssize_t
+get_a_bus_drop(struct device *dev, struct device_attribute *attr,
+	       char *buf)
+{
+	struct mv_otg *mvotg = dev_get_drvdata(dev);
+	return scnprintf(buf, PAGE_SIZE, "%d\n",
+			 mvotg->otg_ctrl.a_bus_drop);
+}
+
+static ssize_t
+set_a_bus_drop(struct device *dev, struct device_attribute *attr,
+	       const char *buf, size_t count)
+{
+	struct mv_otg *mvotg = dev_get_drvdata(dev);
+	if (!mvotg->otg.default_a)
+		return -1;
+
+	if (count > 2)
+		return -1;
+
+	if (buf[0] == '0') {
+		mvotg->otg_ctrl.a_bus_drop = 0;
+		dev_dbg(&mvotg->pdev->dev,
+			"User request: a_bus_drop = 0\n");
+	} else if (buf[0] == '1') {
+		mvotg->otg_ctrl.a_bus_drop = 1;
+		mvotg->otg_ctrl.a_bus_req = 0;
+		dev_dbg(&mvotg->pdev->dev,
+			"User request: a_bus_drop = 1\n");
+		dev_dbg(&mvotg->pdev->dev,
+			"User request: and a_bus_req = 0\n");
+	}
+
+	if (spin_trylock(&mvotg->wq_lock)) {
+		mv_otg_run_state_machine(mvotg, 0);
+		spin_unlock(&mvotg->wq_lock);
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUSR,
+		   get_a_bus_drop, set_a_bus_drop);
+
+static struct attribute *inputs_attrs[] = {
+	&dev_attr_a_bus_req.attr,
+	&dev_attr_a_clr_err.attr,
+	&dev_attr_a_bus_drop.attr,
+	NULL,
+};
+
+static struct attribute_group inputs_attr_group = {
+	.name = "inputs",
+	.attrs = inputs_attrs,
+};
+
+int mv_otg_remove(struct platform_device *pdev)
+{
+	struct mv_otg *mvotg = platform_get_drvdata(pdev);
+	int clk_i;
+
+	sysfs_remove_group(&mvotg->pdev->dev.kobj, &inputs_attr_group);
+
+	if (mvotg->irq)
+		free_irq(mvotg->irq, mvotg);
+
+	if (mvotg->pdata->vbus)
+		free_irq(mvotg->pdata->vbus->irq, mvotg);
+	if (mvotg->pdata->id)
+		free_irq(mvotg->pdata->id->irq, mvotg);
+
+	if (mvotg->qwork) {
+		flush_workqueue(mvotg->qwork);
+		destroy_workqueue(mvotg->qwork);
+	}
+
+	mv_otg_disable(mvotg);
+
+	if (mvotg->cap_regs)
+		iounmap(mvotg->cap_regs);
+
+	if (mvotg->phy_regs)
+		iounmap(mvotg->phy_regs);
+
+	for (clk_i = 0; clk_i <= mvotg->clknum; clk_i++)
+		clk_put(mvotg->clk[clk_i]);
+
+	otg_set_transceiver(NULL);
+	platform_set_drvdata(pdev, NULL);
+
+	kfree(mvotg);
+
+	return 0;
+}
+
+static int mv_otg_probe(struct platform_device *pdev)
+{
+	struct mv_usb_platform_data *pdata = pdev->dev.platform_data;
+	struct mv_otg *mvotg;
+	struct resource *r;
+	int retval = 0, clk_i, i;
+	size_t size;
+
+	if (pdata == NULL) {
+		dev_err(&pdev->dev, "failed to get platform data\n");
+		return -ENODEV;
+	}
+
+	size = sizeof(*mvotg) + sizeof(struct clk *) * pdata->clknum;
+	mvotg = kzalloc(size, GFP_KERNEL);
+	if (!mvotg) {
+		dev_err(&pdev->dev, "failed to allocate memory!\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, mvotg);
+
+	mvotg->pdev = pdev;
+	mvotg->pdata = pdata;
+
+	mvotg->clknum = pdata->clknum;
+	for (clk_i = 0; clk_i < mvotg->clknum; clk_i++) {
+		mvotg->clk[clk_i] = clk_get(&pdev->dev, pdata->clkname[clk_i]);
+		if (IS_ERR(mvotg->clk[clk_i])) {
+			retval = PTR_ERR(mvotg->clk[clk_i]);
+			goto err_put_clk;
+		}
+	}
+
+	mvotg->qwork = create_singlethread_workqueue("mv_otg_queue");
+	if (!mvotg->qwork) {
+		dev_dbg(&pdev->dev, "cannot create workqueue for OTG\n");
+		retval = -ENOMEM;
+		goto err_put_clk;
+	}
+
+	INIT_DELAYED_WORK(&mvotg->work, mv_otg_work);
+
+	/* OTG common part */
+	mvotg->pdev = pdev;
+	mvotg->otg.dev = &pdev->dev;
+	mvotg->otg.label = driver_name;
+	mvotg->otg.set_host = mv_otg_set_host;
+	mvotg->otg.set_peripheral = mv_otg_set_peripheral;
+	mvotg->otg.set_vbus = mv_otg_set_vbus;
+	mvotg->otg.state = OTG_STATE_UNDEFINED;
+
+	for (i = 0; i < OTG_TIMER_NUM; i++)
+		init_timer(&mvotg->otg_ctrl.timer[i]);
+
+	r = platform_get_resource_byname(mvotg->pdev,
+					 IORESOURCE_MEM, "phyregs");
+	if (r == NULL) {
+		dev_err(&pdev->dev, "no phy I/O memory resource defined\n");
+		retval = -ENODEV;
+		goto err_destroy_workqueue;
+	}
+
+	mvotg->phy_regs = ioremap(r->start, resource_size(r));
+	if (mvotg->phy_regs == NULL) {
+		dev_err(&pdev->dev, "failed to map phy I/O memory\n");
+		retval = -EFAULT;
+		goto err_destroy_workqueue;
+	}
+
+	r = platform_get_resource_byname(mvotg->pdev,
+					 IORESOURCE_MEM, "capregs");
+	if (r == NULL) {
+		dev_err(&pdev->dev, "no I/O memory resource defined\n");
+		retval = -ENODEV;
+		goto err_unmap_phyreg;
+	}
+
+	mvotg->cap_regs = ioremap(r->start, resource_size(r));
+	if (mvotg->cap_regs == NULL) {
+		dev_err(&pdev->dev, "failed to map I/O memory\n");
+		retval = -EFAULT;
+		goto err_unmap_phyreg;
+	}
+
+	/* we will acces controller register, so enable the udc controller */
+	retval = mv_otg_enable_internal(mvotg);
+	if (retval) {
+		dev_err(&pdev->dev, "mv otg enable error %d\n", retval);
+		goto err_unmap_capreg;
+	}
+
+	mvotg->op_regs =
+		(struct mv_otg_regs __iomem *) ((unsigned long) mvotg->cap_regs
+			+ (readl(mvotg->cap_regs) & CAPLENGTH_MASK));
+
+	if (pdata->id) {
+		retval = request_threaded_irq(pdata->id->irq, NULL,
+					      mv_otg_inputs_irq,
+					      IRQF_ONESHOT, "id", mvotg);
+		if (retval) {
+			dev_info(&pdev->dev,
+				 "Failed to request irq for ID\n");
+			pdata->id = NULL;
+		}
+	}
+
+	if (pdata->vbus) {
+		mvotg->clock_gating = 1;
+		retval = request_threaded_irq(pdata->vbus->irq, NULL,
+					      mv_otg_inputs_irq,
+					      IRQF_ONESHOT, "vbus", mvotg);
+		if (retval) {
+			dev_info(&pdev->dev,
+				 "Failed to request irq for VBUS, "
+				 "disable clock gating\n");
+			mvotg->clock_gating = 0;
+			pdata->vbus = NULL;
+		}
+	}
+
+	if (pdata->disable_otg_clock_gating)
+		mvotg->clock_gating = 0;
+
+	mv_otg_reset(mvotg);
+	mv_otg_init_irq(mvotg);
+
+	r = platform_get_resource(mvotg->pdev, IORESOURCE_IRQ, 0);
+	if (r == NULL) {
+		dev_err(&pdev->dev, "no IRQ resource defined\n");
+		retval = -ENODEV;
+		goto err_disable_clk;
+	}
+
+	mvotg->irq = r->start;
+	if (request_irq(mvotg->irq, mv_otg_irq, IRQF_SHARED,
+			driver_name, mvotg)) {
+		dev_err(&pdev->dev, "Request irq %d for OTG failed\n",
+			mvotg->irq);
+		mvotg->irq = 0;
+		retval = -ENODEV;
+		goto err_disable_clk;
+	}
+
+	retval = otg_set_transceiver(&mvotg->otg);
+	if (retval < 0) {
+		dev_err(&pdev->dev, "can't register transceiver, %d\n",
+			retval);
+		goto err_free_irq;
+	}
+
+	retval = sysfs_create_group(&pdev->dev.kobj, &inputs_attr_group);
+	if (retval < 0) {
+		dev_dbg(&pdev->dev,
+			"Can't register sysfs attr group: %d\n", retval);
+		goto err_set_transceiver;
+	}
+
+	spin_lock_init(&mvotg->wq_lock);
+	if (spin_trylock(&mvotg->wq_lock)) {
+		mv_otg_run_state_machine(mvotg, 2 * HZ);
+		spin_unlock(&mvotg->wq_lock);
+	}
+
+	dev_info(&pdev->dev,
+		 "successful probe OTG device %s clock gating.\n",
+		 mvotg->clock_gating ? "with" : "without");
+
+	return 0;
+
+err_set_transceiver:
+	otg_set_transceiver(NULL);
+err_free_irq:
+	free_irq(mvotg->irq, mvotg);
+err_disable_clk:
+	if (pdata->vbus)
+		free_irq(pdata->vbus->irq, mvotg);
+	if (pdata->id)
+		free_irq(pdata->id->irq, mvotg);
+	mv_otg_disable_internal(mvotg);
+err_unmap_capreg:
+	iounmap(mvotg->cap_regs);
+err_unmap_phyreg:
+	iounmap(mvotg->phy_regs);
+err_destroy_workqueue:
+	flush_workqueue(mvotg->qwork);
+	destroy_workqueue(mvotg->qwork);
+err_put_clk:
+	for (clk_i--; clk_i >= 0; clk_i--)
+		clk_put(mvotg->clk[clk_i]);
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(mvotg);
+
+	return retval;
+}
+
+#ifdef CONFIG_PM
+static int mv_otg_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct mv_otg *mvotg = platform_get_drvdata(pdev);
+
+	if (mvotg->otg.state != OTG_STATE_B_IDLE) {
+		dev_info(&pdev->dev,
+			 "OTG state is not B_IDLE, it is %d!\n",
+			 mvotg->otg.state);
+		return -EAGAIN;
+	}
+
+	if (!mvotg->clock_gating)
+		mv_otg_disable_internal(mvotg);
+
+	return 0;
+}
+
+static int mv_otg_resume(struct platform_device *pdev)
+{
+	struct mv_otg *mvotg = platform_get_drvdata(pdev);
+	u32 otgsc;
+
+	if (!mvotg->clock_gating) {
+		mv_otg_enable_internal(mvotg);
+
+		otgsc = readl(&mvotg->op_regs->otgsc);
+		otgsc |= mvotg->irq_en;
+		writel(otgsc, &mvotg->op_regs->otgsc);
+
+		if (spin_trylock(&mvotg->wq_lock)) {
+			mv_otg_run_state_machine(mvotg, 0);
+			spin_unlock(&mvotg->wq_lock);
+		}
+	}
+	return 0;
+}
+#endif
+
+static struct platform_driver mv_otg_driver = {
+	.probe = mv_otg_probe,
+	.remove = __exit_p(mv_otg_remove),
+	.driver = {
+		   .owner = THIS_MODULE,
+		   .name = driver_name,
+		   },
+#ifdef CONFIG_PM
+	.suspend = mv_otg_suspend,
+	.resume = mv_otg_resume,
+#endif
+};
+
+static int __init mv_otg_init(void)
+{
+	return platform_driver_register(&mv_otg_driver);
+}
+
+static void __exit mv_otg_exit(void)
+{
+	platform_driver_unregister(&mv_otg_driver);
+}
+
+module_init(mv_otg_init);
+module_exit(mv_otg_exit);
diff --git a/drivers/usb/otg/mv_otg.h b/drivers/usb/otg/mv_otg.h
new file mode 100644
index 000000000000..be6ca1437645
--- /dev/null
+++ b/drivers/usb/otg/mv_otg.h
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef	__MV_USB_OTG_CONTROLLER__
+#define	__MV_USB_OTG_CONTROLLER__
+
+#include <linux/types.h>
+
+/* Command Register Bit Masks */
+#define USBCMD_RUN_STOP			(0x00000001)
+#define USBCMD_CTRL_RESET		(0x00000002)
+
+/* otgsc Register Bit Masks */
+#define OTGSC_CTRL_VUSB_DISCHARGE		0x00000001
+#define OTGSC_CTRL_VUSB_CHARGE			0x00000002
+#define OTGSC_CTRL_OTG_TERM			0x00000008
+#define OTGSC_CTRL_DATA_PULSING			0x00000010
+#define OTGSC_STS_USB_ID			0x00000100
+#define OTGSC_STS_A_VBUS_VALID			0x00000200
+#define OTGSC_STS_A_SESSION_VALID		0x00000400
+#define OTGSC_STS_B_SESSION_VALID		0x00000800
+#define OTGSC_STS_B_SESSION_END			0x00001000
+#define OTGSC_STS_1MS_TOGGLE			0x00002000
+#define OTGSC_STS_DATA_PULSING			0x00004000
+#define OTGSC_INTSTS_USB_ID			0x00010000
+#define OTGSC_INTSTS_A_VBUS_VALID		0x00020000
+#define OTGSC_INTSTS_A_SESSION_VALID		0x00040000
+#define OTGSC_INTSTS_B_SESSION_VALID		0x00080000
+#define OTGSC_INTSTS_B_SESSION_END		0x00100000
+#define OTGSC_INTSTS_1MS			0x00200000
+#define OTGSC_INTSTS_DATA_PULSING		0x00400000
+#define OTGSC_INTR_USB_ID			0x01000000
+#define OTGSC_INTR_A_VBUS_VALID			0x02000000
+#define OTGSC_INTR_A_SESSION_VALID		0x04000000
+#define OTGSC_INTR_B_SESSION_VALID		0x08000000
+#define OTGSC_INTR_B_SESSION_END		0x10000000
+#define OTGSC_INTR_1MS_TIMER			0x20000000
+#define OTGSC_INTR_DATA_PULSING			0x40000000
+
+#define CAPLENGTH_MASK		(0xff)
+
+/* Timer's interval, unit 10ms */
+#define T_A_WAIT_VRISE		100
+#define T_A_WAIT_BCON		2000
+#define T_A_AIDL_BDIS		100
+#define T_A_BIDL_ADIS		20
+#define T_B_ASE0_BRST		400
+#define T_B_SE0_SRP		300
+#define T_B_SRP_FAIL		2000
+#define T_B_DATA_PLS		10
+#define T_B_SRP_INIT		100
+#define T_A_SRP_RSPNS		10
+#define T_A_DRV_RSM		5
+
+enum otg_function {
+	OTG_B_DEVICE = 0,
+	OTG_A_DEVICE
+};
+
+enum mv_otg_timer {
+	A_WAIT_BCON_TIMER = 0,
+	OTG_TIMER_NUM
+};
+
+/* PXA OTG state machine */
+struct mv_otg_ctrl {
+	/* internal variables */
+	u8 a_set_b_hnp_en;	/* A-Device set b_hnp_en */
+	u8 b_srp_done;
+	u8 b_hnp_en;
+
+	/* OTG inputs */
+	u8 a_bus_drop;
+	u8 a_bus_req;
+	u8 a_clr_err;
+	u8 a_bus_resume;
+	u8 a_bus_suspend;
+	u8 a_conn;
+	u8 a_sess_vld;
+	u8 a_srp_det;
+	u8 a_vbus_vld;
+	u8 b_bus_req;		/* B-Device Require Bus */
+	u8 b_bus_resume;
+	u8 b_bus_suspend;
+	u8 b_conn;
+	u8 b_se0_srp;
+	u8 b_sess_end;
+	u8 b_sess_vld;
+	u8 id;
+	u8 a_suspend_req;
+
+	/*Timer event */
+	u8 a_aidl_bdis_timeout;
+	u8 b_ase0_brst_timeout;
+	u8 a_bidl_adis_timeout;
+	u8 a_wait_bcon_timeout;
+
+	struct timer_list timer[OTG_TIMER_NUM];
+};
+
+#define VUSBHS_MAX_PORTS	8
+
+struct mv_otg_regs {
+	u32 usbcmd;		/* Command register */
+	u32 usbsts;		/* Status register */
+	u32 usbintr;		/* Interrupt enable */
+	u32 frindex;		/* Frame index */
+	u32 reserved1[1];
+	u32 deviceaddr;		/* Device Address */
+	u32 eplistaddr;		/* Endpoint List Address */
+	u32 ttctrl;		/* HOST TT status and control */
+	u32 burstsize;		/* Programmable Burst Size */
+	u32 txfilltuning;	/* Host Transmit Pre-Buffer Packet Tuning */
+	u32 reserved[4];
+	u32 epnak;		/* Endpoint NAK */
+	u32 epnaken;		/* Endpoint NAK Enable */
+	u32 configflag;		/* Configured Flag register */
+	u32 portsc[VUSBHS_MAX_PORTS];	/* Port Status/Control x, x = 1..8 */
+	u32 otgsc;
+	u32 usbmode;		/* USB Host/Device mode */
+	u32 epsetupstat;	/* Endpoint Setup Status */
+	u32 epprime;		/* Endpoint Initialize */
+	u32 epflush;		/* Endpoint De-initialize */
+	u32 epstatus;		/* Endpoint Status */
+	u32 epcomplete;		/* Endpoint Interrupt On Complete */
+	u32 epctrlx[16];	/* Endpoint Control, where x = 0.. 15 */
+	u32 mcr;		/* Mux Control */
+	u32 isr;		/* Interrupt Status */
+	u32 ier;		/* Interrupt Enable */
+};
+
+struct mv_otg {
+	struct otg_transceiver otg;
+	struct mv_otg_ctrl otg_ctrl;
+
+	/* base address */
+	void __iomem *phy_regs;
+	void __iomem *cap_regs;
+	struct mv_otg_regs __iomem *op_regs;
+
+	struct platform_device *pdev;
+	int irq;
+	u32 irq_status;
+	u32 irq_en;
+
+	struct delayed_work work;
+	struct workqueue_struct *qwork;
+
+	spinlock_t wq_lock;
+
+	struct mv_usb_platform_data *pdata;
+
+	unsigned int active;
+	unsigned int clock_gating;
+	unsigned int clknum;
+	struct clk *clk[0];
+};
+
+#endif
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index db2a1c6a0866..528691d5f3e2 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -185,7 +185,7 @@ static int usbhsg_dma_map(struct device *dev,
 	}
 
 	if (dma_mapping_error(dev, pkt->dma)) {
-		dev_err(dev, "dma mapping error %x\n", pkt->dma);
+		dev_err(dev, "dma mapping error %llx\n", (u64)pkt->dma);
 		return -EIO;
 	}
 
diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
index aa50eaaffcb6..df8363d252a5 100644
--- a/drivers/usb/renesas_usbhs/mod_host.c
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -633,7 +633,6 @@ static void usbhsh_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt)
 	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
 	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
 	struct urb *urb = ureq->urb;
-	struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep);
 	struct device *dev = usbhs_priv_to_dev(priv);
 	int status = 0;
 
@@ -651,7 +650,7 @@ static void usbhsh_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt)
 	usbhsh_ureq_free(hpriv, ureq);
 
 	usbhsh_endpoint_sequence_save(hpriv, urb, pkt);
-	usbhsh_pipe_detach(hpriv, uep);
+	usbhsh_pipe_detach(hpriv, usbhsh_ep_to_uep(urb->ep));
 
 	usb_hcd_unlink_urb_from_ep(hcd, urb);
 	usb_hcd_giveback_urb(hcd, urb, status);
diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c
index c2559e80d41f..feb06d6d2814 100644
--- a/drivers/usb/renesas_usbhs/pipe.c
+++ b/drivers/usb/renesas_usbhs/pipe.c
@@ -330,8 +330,7 @@ static u16 usbhsp_setup_pipecfg(struct usbhs_pipe *pipe,
 	if (dir_in)
 		usbhsp_flags_set(pipe, IS_DIR_HOST);
 
-	if ((is_host  && !dir_in) ||
-	    (!is_host && dir_in))
+	if (!!is_host ^ !!dir_in)
 		dir |= DIR_OUT;
 
 	if (!dir)
diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h
index e9d9149ddf38..d94804aca764 100644
--- a/include/linux/platform_data/mv_usb.h
+++ b/include/linux/platform_data/mv_usb.h
@@ -42,9 +42,23 @@ struct mv_usb_platform_data {
 	/* only valid for HCD. OTG or Host only*/
 	unsigned int		mode;
 
-	int     (*phy_init)(unsigned int regbase);
-	void    (*phy_deinit)(unsigned int regbase);
+	/* This flag is used for that needs id pin checked by otg */
+	unsigned int    disable_otg_clock_gating:1;
+	/* Force a_bus_req to be asserted */
+	 unsigned int    otg_force_a_bus_req:1;
+
+	int	(*phy_init)(void __iomem *regbase);
+	void	(*phy_deinit)(void __iomem *regbase);
 	int	(*set_vbus)(unsigned int vbus);
+	int     (*private_init)(void __iomem *opregs, void __iomem *phyregs);
 };
 
+#ifndef CONFIG_HAVE_CLK
+/* Dummy stub for clk framework */
+#define clk_get(dev, id)       NULL
+#define clk_put(clock)         do {} while (0)
+#define clk_enable(clock)      do {} while (0)
+#define clk_disable(clock)     do {} while (0)
+#endif
+
 #endif
diff --git a/include/linux/platform_data/s3c-hsudc.h b/include/linux/platform_data/s3c-hsudc.h
new file mode 100644
index 000000000000..6fa109339bf9
--- /dev/null
+++ b/include/linux/platform_data/s3c-hsudc.h
@@ -0,0 +1,34 @@
+/*
+ * S3C24XX USB 2.0 High-speed USB controller gadget driver
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * The S3C24XX USB 2.0 high-speed USB controller supports upto 9 endpoints.
+ * Each endpoint can be configured as either in or out endpoint. Endpoints
+ * can be configured for Bulk or Interrupt transfer mode.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __LINUX_USB_S3C_HSUDC_H
+#define __LINUX_USB_S3C_HSUDC_H
+
+/**
+ * s3c24xx_hsudc_platdata - Platform data for USB High-Speed gadget controller.
+ * @epnum: Number of endpoints to be instantiated by the controller driver.
+ * @gpio_init: Platform specific USB related GPIO initialization.
+ * @gpio_uninit: Platform specific USB releted GPIO uninitialzation.
+ *
+ * Representation of platform data for the S3C24XX USB 2.0 High Speed gadget
+ * controllers.
+ */
+struct s3c24xx_hsudc_platdata {
+	unsigned int	epnum;
+	void		(*gpio_init)(void);
+	void		(*gpio_uninit)(void);
+};
+
+#endif	/* __LINUX_USB_S3C_HSUDC_H */
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 317d8925387c..da653b5c7134 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/slab.h>
+#include <linux/scatterlist.h>
 #include <linux/types.h>
 #include <linux/usb/ch9.h>
 
@@ -32,6 +33,9 @@ struct usb_ep;
  * @dma: DMA address corresponding to 'buf'.  If you don't set this
  *	field, and the usb controller needs one, it is responsible
  *	for mapping and unmapping the buffer.
+ * @sg: a scatterlist for SG-capable controllers.
+ * @num_sgs: number of SG entries
+ * @num_mapped_sgs: number of SG entries mapped to DMA (internal)
  * @length: Length of that data
  * @stream_id: The stream id, when USB3.0 bulk streams are being used
  * @no_interrupt: If true, hints that no completion irq is needed.
@@ -88,6 +92,10 @@ struct usb_request {
 	unsigned		length;
 	dma_addr_t		dma;
 
+	struct scatterlist	*sg;
+	unsigned		num_sgs;
+	unsigned		num_mapped_sgs;
+
 	unsigned		stream_id:16;
 	unsigned		no_interrupt:1;
 	unsigned		zero:1;
@@ -164,7 +172,7 @@ struct usb_ep {
 	unsigned		maxpacket:16;
 	unsigned		max_streams:16;
 	unsigned		mult:2;
-	unsigned		maxburst:4;
+	unsigned		maxburst:5;
 	u8			address;
 	const struct usb_endpoint_descriptor	*desc;
 	const struct usb_ss_ep_comp_descriptor	*comp_desc;
@@ -479,6 +487,7 @@ struct usb_gadget_ops {
  * @speed: Speed of current connection to USB host.
  * @max_speed: Maximal speed the UDC can handle.  UDC must support this
  *      and all slower speeds.
+ * @sg_supported: true if we can handle scatter-gather
  * @is_otg: True if the USB device port uses a Mini-AB jack, so that the
  *	gadget driver must provide a USB OTG descriptor.
  * @is_a_peripheral: False unless is_otg, the "A" end of a USB cable
@@ -519,6 +528,7 @@ struct usb_gadget {
 	struct list_head		ep_list;	/* of usb_ep */
 	enum usb_device_speed		speed;
 	enum usb_device_speed		max_speed;
+	unsigned			sg_supported:1;
 	unsigned			is_otg:1;
 	unsigned			is_a_peripheral:1;
 	unsigned			b_hnp_enable:1;