Merge tag 'staging-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO fixes from Greg KH:
 "Here are a number of small staging and IIO driver fixes for reported
  issues for 5.5-rc2

  Nothing major, a bunch of tiny IIO driver issues resolved, and some
  staging driver fixes for things that people ran into with 5.5-rc1.
  Full details are in the shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'staging-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (28 commits)
  fbtft: Fix the initialization from property algorithm
  staging: rtl8712: fix interface sanity check
  staging: rtl8188eu: fix interface sanity check
  staging: gigaset: add endpoint-type sanity check
  staging: gigaset: fix illegal free on probe errors
  staging: gigaset: fix general protection fault on probe
  staging: vchiq: call unregister_chrdev_region() when driver registration fails
  staging: exfat: fix multiple definition error of `rename_file'
  staging/wlan-ng: add CRC32 dependency in Kconfig
  staging: hp100: Fix build error without ETHERNET
  staging: fbtft: Do not hardcode SPI CS polarity inversion
  staging: exfat: properly support discard in clr_alloc_bitmap()
  staging/octeon: Mark Ethernet driver as BROKEN
  iio: adc: max9611: Fix too short conversion time delay
  iio: ad7949: fix channels mixups
  iio: imu: st_lsm6dsx: do not power-off accel if events are enabled
  iio: imu: st_lsm6dsx: track hw FIFO buffering with fifo_mask
  iio: imu: st_lsm6dsx: fix decimation factor estimation
  iio: imu: inv_mpu6050: fix temperature reporting using bad unit
  iio: humidity: hdc100x: fix IIO_HUMIDITYRELATIVE channel reporting
  ...

28 files changed, 198 insertions, 90 deletions

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
index b68be3aaf587..e1f6d64bdccd 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/iio/adc/adi,ad7292.yaml#
@@ -53,7 +53,8 @@ patternProperties:
         description: |
           The channel number. It can have up to 8 channels numbered from 0 to 7.
         items:
-          maximum: 7
+          - minimum: 0
+            maximum: 7
 
       diff-channels:
         description: see Documentation/devicetree/bindings/iio/adc/adc.txt
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 7b837641f166..7320275c7e56 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -992,6 +992,7 @@ static const struct iio_trigger_ops st_accel_trigger_ops = {
 #define ST_ACCEL_TRIGGER_OPS NULL
 #endif
 
+#ifdef CONFIG_ACPI
 static const struct iio_mount_matrix *
 get_mount_matrix(const struct iio_dev *indio_dev,
 		 const struct iio_chan_spec *chan)
@@ -1012,7 +1013,6 @@ static const struct iio_chan_spec_ext_info mount_matrix_ext_info[] = {
 static int apply_acpi_orientation(struct iio_dev *indio_dev,
 				  struct iio_chan_spec *channels)
 {
-#ifdef CONFIG_ACPI
 	struct st_sensor_data *adata = iio_priv(indio_dev);
 	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
 	struct acpi_device *adev;
@@ -1140,10 +1140,14 @@ static int apply_acpi_orientation(struct iio_dev *indio_dev,
 out:
 	kfree(buffer.pointer);
 	return ret;
+}
 #else /* !CONFIG_ACPI */
+static int apply_acpi_orientation(struct iio_dev *indio_dev,
+				  struct iio_chan_spec *channels)
+{
 	return 0;
-#endif
 }
+#endif
 
 /*
  * st_accel_get_settings() - get sensor settings from device name
diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c
index edc6f1cc90b2..3f03abf100b5 100644
--- a/drivers/iio/adc/ad7124.c
+++ b/drivers/iio/adc/ad7124.c
@@ -39,6 +39,8 @@
 #define AD7124_STATUS_POR_FLAG_MSK	BIT(4)
 
 /* AD7124_ADC_CONTROL */
+#define AD7124_ADC_CTRL_REF_EN_MSK	BIT(8)
+#define AD7124_ADC_CTRL_REF_EN(x)	FIELD_PREP(AD7124_ADC_CTRL_REF_EN_MSK, x)
 #define AD7124_ADC_CTRL_PWR_MSK	GENMASK(7, 6)
 #define AD7124_ADC_CTRL_PWR(x)		FIELD_PREP(AD7124_ADC_CTRL_PWR_MSK, x)
 #define AD7124_ADC_CTRL_MODE_MSK	GENMASK(5, 2)
@@ -424,7 +426,10 @@ static int ad7124_init_channel_vref(struct ad7124_state *st,
 		break;
 	case AD7124_INT_REF:
 		st->channel_config[channel_number].vref_mv = 2500;
-		break;
+		st->adc_control &= ~AD7124_ADC_CTRL_REF_EN_MSK;
+		st->adc_control |= AD7124_ADC_CTRL_REF_EN(1);
+		return ad_sd_write_reg(&st->sd, AD7124_ADC_CONTROL,
+				      2, st->adc_control);
 	default:
 		dev_err(&st->sd.spi->dev, "Invalid reference %d\n", refsel);
 		return -EINVAL;
diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
index f5ba94c03a8d..e4683a68522a 100644
--- a/drivers/iio/adc/ad7606.c
+++ b/drivers/iio/adc/ad7606.c
@@ -85,7 +85,7 @@ err_unlock:
 
 static int ad7606_read_samples(struct ad7606_state *st)
 {
-	unsigned int num = st->chip_info->num_channels;
+	unsigned int num = st->chip_info->num_channels - 1;
 	u16 *data = st->data;
 	int ret;
 
diff --git a/drivers/iio/adc/ad7949.c b/drivers/iio/adc/ad7949.c
index 5c2b3446fa4a..2c6f60edb7ce 100644
--- a/drivers/iio/adc/ad7949.c
+++ b/drivers/iio/adc/ad7949.c
@@ -89,6 +89,7 @@ static int ad7949_spi_read_channel(struct ad7949_adc_chip *ad7949_adc, int *val,
 				   unsigned int channel)
 {
 	int ret;
+	int i;
 	int bits_per_word = ad7949_adc->resolution;
 	int mask = GENMASK(ad7949_adc->resolution, 0);
 	struct spi_message msg;
@@ -100,12 +101,23 @@ static int ad7949_spi_read_channel(struct ad7949_adc_chip *ad7949_adc, int *val,
 		},
 	};
 
-	ret = ad7949_spi_write_cfg(ad7949_adc,
-				   channel << AD7949_OFFSET_CHANNEL_SEL,
-				   AD7949_MASK_CHANNEL_SEL);
-	if (ret)
-		return ret;
+	/*
+	 * 1: write CFG for sample N and read old data (sample N-2)
+	 * 2: if CFG was not changed since sample N-1 then we'll get good data
+	 *    at the next xfer, so we bail out now, otherwise we write something
+	 *    and we read garbage (sample N-1 configuration).
+	 */
+	for (i = 0; i < 2; i++) {
+		ret = ad7949_spi_write_cfg(ad7949_adc,
+					   channel << AD7949_OFFSET_CHANNEL_SEL,
+					   AD7949_MASK_CHANNEL_SEL);
+		if (ret)
+			return ret;
+		if (channel == ad7949_adc->current_channel)
+			break;
+	}
 
+	/* 3: write something and read actual data */
 	ad7949_adc->buffer = 0;
 	spi_message_init_with_transfers(&msg, tx, 1);
 	ret = spi_sync(ad7949_adc->spi, &msg);
diff --git a/drivers/iio/adc/intel_mrfld_adc.c b/drivers/iio/adc/intel_mrfld_adc.c
index 67d096f8180d..c35a1beb817c 100644
--- a/drivers/iio/adc/intel_mrfld_adc.c
+++ b/drivers/iio/adc/intel_mrfld_adc.c
@@ -185,7 +185,7 @@ static int mrfld_adc_probe(struct platform_device *pdev)
 	int irq;
 	int ret;
 
-	indio_dev = devm_iio_device_alloc(dev, sizeof(*indio_dev));
+	indio_dev = devm_iio_device_alloc(dev, sizeof(struct mrfld_adc));
 	if (!indio_dev)
 		return -ENOMEM;
 
diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c
index e171db20c04a..02834ca3e1ce 100644
--- a/drivers/iio/adc/max1027.c
+++ b/drivers/iio/adc/max1027.c
@@ -478,7 +478,13 @@ static int max1027_probe(struct spi_device *spi)
 		st->trig->ops = &max1027_trigger_ops;
 		st->trig->dev.parent = &spi->dev;
 		iio_trigger_set_drvdata(st->trig, indio_dev);
-		iio_trigger_register(st->trig);
+		ret = devm_iio_trigger_register(&indio_dev->dev,
+						st->trig);
+		if (ret < 0) {
+			dev_err(&indio_dev->dev,
+				"Failed to register iio trigger\n");
+			return ret;
+		}
 
 		ret = devm_request_threaded_irq(&spi->dev, spi->irq,
 						iio_trigger_generic_data_rdy_poll,
diff --git a/drivers/iio/adc/max9611.c b/drivers/iio/adc/max9611.c
index da073d72f649..e480529b3f04 100644
--- a/drivers/iio/adc/max9611.c
+++ b/drivers/iio/adc/max9611.c
@@ -89,6 +89,12 @@
 #define MAX9611_TEMP_SCALE_NUM		1000000
 #define MAX9611_TEMP_SCALE_DIV		2083
 
+/*
+ * Conversion time is 2 ms (typically) at Ta=25 degreeC
+ * No maximum value is known, so play it safe.
+ */
+#define MAX9611_CONV_TIME_US_RANGE	3000, 3300
+
 struct max9611_dev {
 	struct device *dev;
 	struct i2c_client *i2c_client;
@@ -236,11 +242,9 @@ static int max9611_read_single(struct max9611_dev *max9611,
 		return ret;
 	}
 
-	/*
-	 * need a delay here to make register configuration
-	 * stabilize. 1 msec at least, from empirical testing.
-	 */
-	usleep_range(1000, 2000);
+	/* need a delay here to make register configuration stabilize. */
+
+	usleep_range(MAX9611_CONV_TIME_US_RANGE);
 
 	ret = i2c_smbus_read_word_swapped(max9611->i2c_client, reg_addr);
 	if (ret < 0) {
@@ -507,7 +511,7 @@ static int max9611_init(struct max9611_dev *max9611)
 			MAX9611_REG_CTRL2, 0);
 		return ret;
 	}
-	usleep_range(1000, 2000);
+	usleep_range(MAX9611_CONV_TIME_US_RANGE);
 
 	return 0;
 }
diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c
index 963ff043eecf..7ecd2ffa3132 100644
--- a/drivers/iio/humidity/hdc100x.c
+++ b/drivers/iio/humidity/hdc100x.c
@@ -229,7 +229,7 @@ static int hdc100x_read_raw(struct iio_dev *indio_dev,
 			*val2 = 65536;
 			return IIO_VAL_FRACTIONAL;
 		} else {
-			*val = 100;
+			*val = 100000;
 			*val2 = 65536;
 			return IIO_VAL_FRACTIONAL;
 		}
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 45e77b308238..0686e41bb8a1 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -117,6 +117,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
 		.reg = &reg_set_6050,
 		.config = &chip_config_6050,
 		.fifo_size = 1024,
+		.temp = {INV_MPU6050_TEMP_OFFSET, INV_MPU6050_TEMP_SCALE},
 	},
 	{
 		.whoami = INV_MPU6500_WHOAMI_VALUE,
@@ -124,6 +125,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
 		.reg = &reg_set_6500,
 		.config = &chip_config_6050,
 		.fifo_size = 512,
+		.temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
 	},
 	{
 		.whoami = INV_MPU6515_WHOAMI_VALUE,
@@ -131,6 +133,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
 		.reg = &reg_set_6500,
 		.config = &chip_config_6050,
 		.fifo_size = 512,
+		.temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
 	},
 	{
 		.whoami = INV_MPU6000_WHOAMI_VALUE,
@@ -138,6 +141,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
 		.reg = &reg_set_6050,
 		.config = &chip_config_6050,
 		.fifo_size = 1024,
+		.temp = {INV_MPU6050_TEMP_OFFSET, INV_MPU6050_TEMP_SCALE},
 	},
 	{
 		.whoami = INV_MPU9150_WHOAMI_VALUE,
@@ -145,6 +149,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
 		.reg = &reg_set_6050,
 		.config = &chip_config_6050,
 		.fifo_size = 1024,
+		.temp = {INV_MPU6050_TEMP_OFFSET, INV_MPU6050_TEMP_SCALE},
 	},
 	{
 		.whoami = INV_MPU9250_WHOAMI_VALUE,
@@ -152,6 +157,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
 		.reg = &reg_set_6500,
 		.config = &chip_config_6050,
 		.fifo_size = 512,
+		.temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
 	},
 	{
 		.whoami = INV_MPU9255_WHOAMI_VALUE,
@@ -159,6 +165,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
 		.reg = &reg_set_6500,
 		.config = &chip_config_6050,
 		.fifo_size = 512,
+		.temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
 	},
 	{
 		.whoami = INV_ICM20608_WHOAMI_VALUE,
@@ -166,6 +173,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
 		.reg = &reg_set_6500,
 		.config = &chip_config_6050,
 		.fifo_size = 512,
+		.temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
 	},
 	{
 		.whoami = INV_ICM20602_WHOAMI_VALUE,
@@ -173,6 +181,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
 		.reg = &reg_set_icm20602,
 		.config = &chip_config_6050,
 		.fifo_size = 1008,
+		.temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
 	},
 };
 
@@ -481,12 +490,8 @@ inv_mpu6050_read_raw(struct iio_dev *indio_dev,
 
 			return IIO_VAL_INT_PLUS_MICRO;
 		case IIO_TEMP:
-			*val = 0;
-			if (st->chip_type == INV_ICM20602)
-				*val2 = INV_ICM20602_TEMP_SCALE;
-			else
-				*val2 = INV_MPU6050_TEMP_SCALE;
-
+			*val = st->hw->temp.scale / 1000000;
+			*val2 = st->hw->temp.scale % 1000000;
 			return IIO_VAL_INT_PLUS_MICRO;
 		case IIO_MAGN:
 			return inv_mpu_magn_get_scale(st, chan, val, val2);
@@ -496,11 +501,7 @@ inv_mpu6050_read_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_OFFSET:
 		switch (chan->type) {
 		case IIO_TEMP:
-			if (st->chip_type == INV_ICM20602)
-				*val = INV_ICM20602_TEMP_OFFSET;
-			else
-				*val = INV_MPU6050_TEMP_OFFSET;
-
+			*val = st->hw->temp.offset;
 			return IIO_VAL_INT;
 		default:
 			return -EINVAL;
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index f1fb7b6bdab1..b096e010d4ee 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -107,6 +107,7 @@ struct inv_mpu6050_chip_config {
  *  @reg:   register map of the chip.
  *  @config:    configuration of the chip.
  *  @fifo_size:	size of the FIFO in bytes.
+ *  @temp:	offset and scale to apply to raw temperature.
  */
 struct inv_mpu6050_hw {
 	u8 whoami;
@@ -114,6 +115,10 @@ struct inv_mpu6050_hw {
 	const struct inv_mpu6050_reg_map *reg;
 	const struct inv_mpu6050_chip_config *config;
 	size_t fifo_size;
+	struct {
+		int offset;
+		int scale;
+	} temp;
 };
 
 /*
@@ -279,16 +284,19 @@ struct inv_mpu6050_state {
 #define INV_MPU6050_REG_UP_TIME_MIN          5000
 #define INV_MPU6050_REG_UP_TIME_MAX          10000
 
-#define INV_MPU6050_TEMP_OFFSET	             12421
-#define INV_MPU6050_TEMP_SCALE               2941
+#define INV_MPU6050_TEMP_OFFSET	             12420
+#define INV_MPU6050_TEMP_SCALE               2941176
 #define INV_MPU6050_MAX_GYRO_FS_PARAM        3
 #define INV_MPU6050_MAX_ACCL_FS_PARAM        3
 #define INV_MPU6050_THREE_AXIS               3
 #define INV_MPU6050_GYRO_CONFIG_FSR_SHIFT    3
 #define INV_MPU6050_ACCL_CONFIG_FSR_SHIFT    3
 
-#define INV_ICM20602_TEMP_OFFSET	     8170
-#define INV_ICM20602_TEMP_SCALE		     3060
+#define INV_MPU6500_TEMP_OFFSET              7011
+#define INV_MPU6500_TEMP_SCALE               2995178
+
+#define INV_ICM20608_TEMP_OFFSET	     8170
+#define INV_ICM20608_TEMP_SCALE		     3059976
 
 /* 6 + 6 + 7 (for MPU9x50) = 19 round up to 24 and plus 8 */
 #define INV_MPU6050_OUTPUT_DATA_SIZE         32
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index c605b153be41..dc55d7dff3eb 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -320,7 +320,6 @@ enum st_lsm6dsx_fifo_mode {
  * @odr: Output data rate of the sensor [Hz].
  * @watermark: Sensor watermark level.
  * @sip: Number of samples in a given pattern.
- * @decimator: FIFO decimation factor.
  * @ts_ref: Sensor timestamp reference for hw one.
  * @ext_info: Sensor settings if it is connected to i2c controller
  */
@@ -334,7 +333,6 @@ struct st_lsm6dsx_sensor {
 
 	u16 watermark;
 	u8 sip;
-	u8 decimator;
 	s64 ts_ref;
 
 	struct {
@@ -351,9 +349,9 @@ struct st_lsm6dsx_sensor {
  * @fifo_lock: Mutex to prevent concurrent access to the hw FIFO.
  * @conf_lock: Mutex to prevent concurrent FIFO configuration update.
  * @page_lock: Mutex to prevent concurrent memory page configuration.
- * @fifo_mode: FIFO operating mode supported by the device.
  * @suspend_mask: Suspended sensor bitmask.
  * @enable_mask: Enabled sensor bitmask.
+ * @fifo_mask: Enabled hw FIFO bitmask.
  * @ts_gain: Hw timestamp rate after internal calibration.
  * @ts_sip: Total number of timestamp samples in a given pattern.
  * @sip: Total number of samples (acc/gyro/ts) in a given pattern.
@@ -373,9 +371,9 @@ struct st_lsm6dsx_hw {
 	struct mutex conf_lock;
 	struct mutex page_lock;
 
-	enum st_lsm6dsx_fifo_mode fifo_mode;
 	u8 suspend_mask;
 	u8 enable_mask;
+	u8 fifo_mask;
 	s64 ts_gain;
 	u8 ts_sip;
 	u8 sip;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
index d416990ae309..cb536b81a1c2 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -78,14 +78,20 @@ struct st_lsm6dsx_decimator_entry st_lsm6dsx_decimator_table[] = {
 	{ 32, 0x7 },
 };
 
-static int st_lsm6dsx_get_decimator_val(u8 val)
+static int
+st_lsm6dsx_get_decimator_val(struct st_lsm6dsx_sensor *sensor, u32 max_odr)
 {
 	const int max_size = ARRAY_SIZE(st_lsm6dsx_decimator_table);
+	u32 decimator =  max_odr / sensor->odr;
 	int i;
 
-	for (i = 0; i < max_size; i++)
-		if (st_lsm6dsx_decimator_table[i].decimator == val)
+	if (decimator > 1)
+		decimator = round_down(decimator, 2);
+
+	for (i = 0; i < max_size; i++) {
+		if (st_lsm6dsx_decimator_table[i].decimator == decimator)
 			break;
+	}
 
 	return i == max_size ? 0 : st_lsm6dsx_decimator_table[i].val;
 }
@@ -111,6 +117,13 @@ static void st_lsm6dsx_get_max_min_odr(struct st_lsm6dsx_hw *hw,
 	}
 }
 
+static u8 st_lsm6dsx_get_sip(struct st_lsm6dsx_sensor *sensor, u32 min_odr)
+{
+	u8 sip = sensor->odr / min_odr;
+
+	return sip > 1 ? round_down(sip, 2) : sip;
+}
+
 static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw)
 {
 	const struct st_lsm6dsx_reg *ts_dec_reg;
@@ -131,12 +144,10 @@ static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw)
 		sensor = iio_priv(hw->iio_devs[i]);
 		/* update fifo decimators and sample in pattern */
 		if (hw->enable_mask & BIT(sensor->id)) {
-			sensor->sip = sensor->odr / min_odr;
-			sensor->decimator = max_odr / sensor->odr;
-			data = st_lsm6dsx_get_decimator_val(sensor->decimator);
+			sensor->sip = st_lsm6dsx_get_sip(sensor, min_odr);
+			data = st_lsm6dsx_get_decimator_val(sensor, max_odr);
 		} else {
 			sensor->sip = 0;
-			sensor->decimator = 0;
 			data = 0;
 		}
 		ts_sip = max_t(u16, ts_sip, sensor->sip);
@@ -176,17 +187,10 @@ int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw,
 			     enum st_lsm6dsx_fifo_mode fifo_mode)
 {
 	unsigned int data;
-	int err;
 
 	data = FIELD_PREP(ST_LSM6DSX_FIFO_MODE_MASK, fifo_mode);
-	err = st_lsm6dsx_update_bits_locked(hw, ST_LSM6DSX_REG_FIFO_MODE_ADDR,
-					    ST_LSM6DSX_FIFO_MODE_MASK, data);
-	if (err < 0)
-		return err;
-
-	hw->fifo_mode = fifo_mode;
-
-	return 0;
+	return st_lsm6dsx_update_bits_locked(hw, ST_LSM6DSX_REG_FIFO_MODE_ADDR,
+					     ST_LSM6DSX_FIFO_MODE_MASK, data);
 }
 
 static int st_lsm6dsx_set_fifo_odr(struct st_lsm6dsx_sensor *sensor,
@@ -608,11 +612,17 @@ int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw)
 int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable)
 {
 	struct st_lsm6dsx_hw *hw = sensor->hw;
+	u8 fifo_mask;
 	int err;
 
 	mutex_lock(&hw->conf_lock);
 
-	if (hw->fifo_mode != ST_LSM6DSX_FIFO_BYPASS) {
+	if (enable)
+		fifo_mask = hw->fifo_mask | BIT(sensor->id);
+	else
+		fifo_mask = hw->fifo_mask & ~BIT(sensor->id);
+
+	if (hw->fifo_mask) {
 		err = st_lsm6dsx_flush_fifo(hw);
 		if (err < 0)
 			goto out;
@@ -642,15 +652,19 @@ int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable)
 	if (err < 0)
 		goto out;
 
-	if (hw->enable_mask) {
+	if (fifo_mask) {
 		/* reset hw ts counter */
 		err = st_lsm6dsx_reset_hw_ts(hw);
 		if (err < 0)
 			goto out;
 
 		err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_CONT);
+		if (err < 0)
+			goto out;
 	}
 
+	hw->fifo_mask = fifo_mask;
+
 out:
 	mutex_unlock(&hw->conf_lock);
 
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 11b2c7bc8041..a7d40c02ce6b 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -1447,8 +1447,9 @@ st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u32 req_odr)
 	return st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data);
 }
 
-int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
-				 bool enable)
+static int
+__st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
+			       bool enable)
 {
 	struct st_lsm6dsx_hw *hw = sensor->hw;
 	u32 odr = enable ? sensor->odr : 0;
@@ -1466,6 +1467,26 @@ int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
 	return 0;
 }
 
+static int
+st_lsm6dsx_check_events(struct st_lsm6dsx_sensor *sensor, bool enable)
+{
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+
+	if (sensor->id == ST_LSM6DSX_ID_GYRO || enable)
+		return 0;
+
+	return hw->enable_event;
+}
+
+int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
+				 bool enable)
+{
+	if (st_lsm6dsx_check_events(sensor, enable))
+		return 0;
+
+	return __st_lsm6dsx_sensor_set_enable(sensor, enable);
+}
+
 static int st_lsm6dsx_read_oneshot(struct st_lsm6dsx_sensor *sensor,
 				   u8 addr, int *val)
 {
@@ -1661,7 +1682,7 @@ st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
 	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
 	struct st_lsm6dsx_hw *hw = sensor->hw;
 	u8 enable_event;
-	int err = 0;
+	int err;
 
 	if (type != IIO_EV_TYPE_THRESH)
 		return -EINVAL;
@@ -1689,7 +1710,8 @@ st_lsm6dsx_write_event_config(struct iio_dev *iio_dev,
 		return err;
 
 	mutex_lock(&hw->conf_lock);
-	err = st_lsm6dsx_sensor_set_enable(sensor, state);
+	if (enable_event || !(hw->fifo_mask & BIT(sensor->id)))
+		err = __st_lsm6dsx_sensor_set_enable(sensor, state);
 	mutex_unlock(&hw->conf_lock);
 	if (err < 0)
 		return err;
@@ -2300,7 +2322,7 @@ static int __maybe_unused st_lsm6dsx_suspend(struct device *dev)
 		hw->suspend_mask |= BIT(sensor->id);
 	}
 
-	if (hw->fifo_mode != ST_LSM6DSX_FIFO_BYPASS)
+	if (hw->fifo_mask)
 		err = st_lsm6dsx_flush_fifo(hw);
 
 	return err;
@@ -2336,7 +2358,7 @@ static int __maybe_unused st_lsm6dsx_resume(struct device *dev)
 		hw->suspend_mask &= ~BIT(sensor->id);
 	}
 
-	if (hw->enable_mask)
+	if (hw->fifo_mask)
 		err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_CONT);
 
 	return err;
diff --git a/drivers/iio/temperature/ltc2983.c b/drivers/iio/temperature/ltc2983.c
index ddf47023364b..d39c0d6b77f1 100644
--- a/drivers/iio/temperature/ltc2983.c
+++ b/drivers/iio/temperature/ltc2983.c
@@ -444,8 +444,10 @@ static struct ltc2983_custom_sensor *__ltc2983_custom_sensor_new(
 			else
 				temp = __convert_to_raw(temp, resolution);
 		} else {
-			of_property_read_u32_index(np, propname, index,
-						   (u32 *)&temp);
+			u32 t32;
+
+			of_property_read_u32_index(np, propname, index, &t32);
+			temp = t32;
 		}
 
 		for (j = 0; j < n_size; j++)
diff --git a/drivers/staging/exfat/exfat.h b/drivers/staging/exfat/exfat.h
index 2aac1e000977..51c665a924b7 100644
--- a/drivers/staging/exfat/exfat.h
+++ b/drivers/staging/exfat/exfat.h
@@ -805,8 +805,8 @@ s32 create_dir(struct inode *inode, struct chain_t *p_dir,
 s32 create_file(struct inode *inode, struct chain_t *p_dir,
 		struct uni_name_t *p_uniname, u8 mode, struct file_id_t *fid);
 void remove_file(struct inode *inode, struct chain_t *p_dir, s32 entry);
-s32 rename_file(struct inode *inode, struct chain_t *p_dir, s32 old_entry,
-		struct uni_name_t *p_uniname, struct file_id_t *fid);
+s32 exfat_rename_file(struct inode *inode, struct chain_t *p_dir, s32 old_entry,
+		      struct uni_name_t *p_uniname, struct file_id_t *fid);
 s32 move_file(struct inode *inode, struct chain_t *p_olddir, s32 oldentry,
 	      struct chain_t *p_newdir, struct uni_name_t *p_uniname,
 	      struct file_id_t *fid);
diff --git a/drivers/staging/exfat/exfat_core.c b/drivers/staging/exfat/exfat_core.c
index d2d3447083c7..794000e7bc6f 100644
--- a/drivers/staging/exfat/exfat_core.c
+++ b/drivers/staging/exfat/exfat_core.c
@@ -192,8 +192,6 @@ static s32 clr_alloc_bitmap(struct super_block *sb, u32 clu)
 
 	exfat_bitmap_clear((u8 *)p_fs->vol_amap[i]->b_data, b);
 
-	return sector_write(sb, sector, p_fs->vol_amap[i], 0);
-
 #ifdef CONFIG_EXFAT_DISCARD
 	if (opts->discard) {
 		ret = sb_issue_discard(sb, START_SECTOR(clu),
@@ -202,9 +200,13 @@ static s32 clr_alloc_bitmap(struct super_block *sb, u32 clu)
 		if (ret == -EOPNOTSUPP) {
 			pr_warn("discard not supported by device, disabling");
 			opts->discard = 0;
+		} else {
+			return ret;
 		}
 	}
 #endif /* CONFIG_EXFAT_DISCARD */
+
+	return sector_write(sb, sector, p_fs->vol_amap[i], 0);
 }
 
 static u32 test_alloc_bitmap(struct super_block *sb, u32 clu)
@@ -2322,8 +2324,8 @@ void remove_file(struct inode *inode, struct chain_t *p_dir, s32 entry)
 	fs_func->delete_dir_entry(sb, p_dir, entry, 0, num_entries);
 }
 
-s32 rename_file(struct inode *inode, struct chain_t *p_dir, s32 oldentry,
-		struct uni_name_t *p_uniname, struct file_id_t *fid)
+s32 exfat_rename_file(struct inode *inode, struct chain_t *p_dir, s32 oldentry,
+		      struct uni_name_t *p_uniname, struct file_id_t *fid)
 {
 	s32 ret, newentry = -1, num_old_entries, num_new_entries;
 	sector_t sector_old, sector_new;
diff --git a/drivers/staging/exfat/exfat_super.c b/drivers/staging/exfat/exfat_super.c
index 6e481908c59f..9f91853b189b 100644
--- a/drivers/staging/exfat/exfat_super.c
+++ b/drivers/staging/exfat/exfat_super.c
@@ -1262,8 +1262,8 @@ static int ffsMoveFile(struct inode *old_parent_inode, struct file_id_t *fid,
 	fs_set_vol_flags(sb, VOL_DIRTY);
 
 	if (olddir.dir == newdir.dir)
-		ret = rename_file(new_parent_inode, &olddir, dentry, &uni_name,
-				  fid);
+		ret = exfat_rename_file(new_parent_inode, &olddir, dentry,
+					&uni_name, fid);
 	else
 		ret = move_file(new_parent_inode, &olddir, dentry, &newdir,
 				&uni_name, fid);
diff --git a/drivers/staging/fbtft/fb_uc1611.c b/drivers/staging/fbtft/fb_uc1611.c
index e763205e9e4f..f61e373c75e9 100644
--- a/drivers/staging/fbtft/fb_uc1611.c
+++ b/drivers/staging/fbtft/fb_uc1611.c
@@ -63,11 +63,17 @@ static int init_display(struct fbtft_par *par)
 {
 	int ret;
 
-	/* Set CS active high */
-	par->spi->mode |= SPI_CS_HIGH;
+	/*
+	 * Set CS active inverse polarity: just setting SPI_CS_HIGH does not
+	 * work with GPIO based chip selects that are logically active high
+	 * but inverted inside the GPIO library, so enforce inverted
+	 * semantics.
+	 */
+	par->spi->mode ^= SPI_CS_HIGH;
 	ret = spi_setup(par->spi);
 	if (ret) {
-		dev_err(par->info->device, "Could not set SPI_CS_HIGH\n");
+		dev_err(par->info->device,
+			"Could not set inverse CS polarity\n");
 		return ret;
 	}
 
diff --git a/drivers/staging/fbtft/fb_watterott.c b/drivers/staging/fbtft/fb_watterott.c
index 27cc8eabcbe9..76b25df376b8 100644
--- a/drivers/staging/fbtft/fb_watterott.c
+++ b/drivers/staging/fbtft/fb_watterott.c
@@ -150,10 +150,17 @@ static int init_display(struct fbtft_par *par)
 
 	/* enable SPI interface by having CS and MOSI low during reset */
 	save_mode = par->spi->mode;
-	par->spi->mode |= SPI_CS_HIGH;
-	ret = spi_setup(par->spi); /* set CS inactive low */
+	/*
+	 * Set CS active inverse polarity: just setting SPI_CS_HIGH does not
+	 * work with GPIO based chip selects that are logically active high
+	 * but inverted inside the GPIO library, so enforce inverted
+	 * semantics.
+	 */
+	par->spi->mode ^= SPI_CS_HIGH;
+	ret = spi_setup(par->spi);
 	if (ret) {
-		dev_err(par->info->device, "Could not set SPI_CS_HIGH\n");
+		dev_err(par->info->device,
+			"Could not set inverse CS polarity\n");
 		return ret;
 	}
 	write_reg(par, 0x00); /* make sure mode is set */
diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c
index ffb84987dd86..d3e098b41b1a 100644
--- a/drivers/staging/fbtft/fbtft-core.c
+++ b/drivers/staging/fbtft/fbtft-core.c
@@ -913,7 +913,7 @@ static int fbtft_init_display_from_property(struct fbtft_par *par)
 	if (count == 0)
 		return -EINVAL;
 
-	values = kmalloc_array(count, sizeof(*values), GFP_KERNEL);
+	values = kmalloc_array(count + 1, sizeof(*values), GFP_KERNEL);
 	if (!values)
 		return -ENOMEM;
 
@@ -926,9 +926,9 @@ static int fbtft_init_display_from_property(struct fbtft_par *par)
 		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
 
 	index = -1;
-	while (index < count) {
-		val = values[++index];
+	val = values[++index];
 
+	while (index < count) {
 		if (val & FBTFT_OF_INIT_CMD) {
 			val &= 0xFFFF;
 			i = 0;
diff --git a/drivers/staging/hp/Kconfig b/drivers/staging/hp/Kconfig
index fb395cfe6b92..f20ab21a6b2a 100644
--- a/drivers/staging/hp/Kconfig
+++ b/drivers/staging/hp/Kconfig
@@ -6,6 +6,7 @@
 config NET_VENDOR_HP
 	bool "HP devices"
 	default y
+	depends on ETHERNET
 	depends on ISA || EISA || PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y.
diff --git a/drivers/staging/isdn/gigaset/usb-gigaset.c b/drivers/staging/isdn/gigaset/usb-gigaset.c
index 1b9b43659bdf..a20c0bfa68f3 100644
--- a/drivers/staging/isdn/gigaset/usb-gigaset.c
+++ b/drivers/staging/isdn/gigaset/usb-gigaset.c
@@ -571,8 +571,7 @@ static int gigaset_initcshw(struct cardstate *cs)
 {
 	struct usb_cardstate *ucs;
 
-	cs->hw.usb = ucs =
-		kmalloc(sizeof(struct usb_cardstate), GFP_KERNEL);
+	cs->hw.usb = ucs = kzalloc(sizeof(struct usb_cardstate), GFP_KERNEL);
 	if (!ucs) {
 		pr_err("out of memory\n");
 		return -ENOMEM;
@@ -584,9 +583,6 @@ static int gigaset_initcshw(struct cardstate *cs)
 	ucs->bchars[3] = 0;
 	ucs->bchars[4] = 0x11;
 	ucs->bchars[5] = 0x13;
-	ucs->bulk_out_buffer = NULL;
-	ucs->bulk_out_urb = NULL;
-	ucs->read_urb = NULL;
 	tasklet_init(&cs->write_tasklet,
 		     gigaset_modem_fill, (unsigned long) cs);
 
@@ -685,6 +681,11 @@ static int gigaset_probe(struct usb_interface *interface,
 		return -ENODEV;
 	}
 
+	if (hostif->desc.bNumEndpoints < 2) {
+		dev_err(&interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
 	dev_info(&udev->dev, "%s: Device matched ... !\n", __func__);
 
 	/* allocate memory for our device state and initialize it */
@@ -704,6 +705,12 @@ static int gigaset_probe(struct usb_interface *interface,
 
 	endpoint = &hostif->endpoint[0].desc;
 
+	if (!usb_endpoint_is_bulk_out(endpoint)) {
+		dev_err(&interface->dev, "missing bulk-out endpoint\n");
+		retval = -ENODEV;
+		goto error;
+	}
+
 	buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
 	ucs->bulk_out_size = buffer_size;
 	ucs->bulk_out_epnum = usb_endpoint_num(endpoint);
@@ -723,6 +730,12 @@ static int gigaset_probe(struct usb_interface *interface,
 
 	endpoint = &hostif->endpoint[1].desc;
 
+	if (!usb_endpoint_is_int_in(endpoint)) {
+		dev_err(&interface->dev, "missing int-in endpoint\n");
+		retval = -ENODEV;
+		goto error;
+	}
+
 	ucs->busy = 0;
 
 	ucs->read_urb = usb_alloc_urb(0, GFP_KERNEL);
diff --git a/drivers/staging/octeon/Kconfig b/drivers/staging/octeon/Kconfig
index 5319909eb2f6..e7f4ddcc1361 100644
--- a/drivers/staging/octeon/Kconfig
+++ b/drivers/staging/octeon/Kconfig
@@ -3,6 +3,7 @@ config OCTEON_ETHERNET
 	tristate "Cavium Networks Octeon Ethernet support"
 	depends on CAVIUM_OCTEON_SOC || COMPILE_TEST
 	depends on NETDEVICES
+	depends on BROKEN
 	select PHYLIB
 	select MDIO_OCTEON
 	help
diff --git a/drivers/staging/rtl8188eu/os_dep/usb_intf.c b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
index 4fac9dca798e..a7cac0719b8b 100644
--- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c
+++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
@@ -70,7 +70,7 @@ static struct dvobj_priv *usb_dvobj_init(struct usb_interface *usb_intf)
 	phost_conf = pusbd->actconfig;
 	pconf_desc = &phost_conf->desc;
 
-	phost_iface = &usb_intf->altsetting[0];
+	phost_iface = usb_intf->cur_altsetting;
 	piface_desc = &phost_iface->desc;
 
 	pdvobjpriv->NumInterfaces = pconf_desc->bNumInterfaces;
diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c
index ba1288297ee4..a87562f632a7 100644
--- a/drivers/staging/rtl8712/usb_intf.c
+++ b/drivers/staging/rtl8712/usb_intf.c
@@ -247,7 +247,7 @@ static uint r8712_usb_dvobj_init(struct _adapter *padapter)
 
 	pdvobjpriv->padapter = padapter;
 	padapter->eeprom_address_size = 6;
-	phost_iface = &pintf->altsetting[0];
+	phost_iface = pintf->cur_altsetting;
 	piface_desc = &phost_iface->desc;
 	pdvobjpriv->nr_endpoint = piface_desc->bNumEndpoints;
 	if (pusbd->speed == USB_SPEED_HIGH) {
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
index 02148a24818a..4458c1e60fa3 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
@@ -3309,7 +3309,7 @@ static int __init vchiq_driver_init(void)
 	return 0;
 
 region_unregister:
-	platform_driver_unregister(&vchiq_driver);
+	unregister_chrdev_region(vchiq_devid, 1);
 
 class_destroy:
 	class_destroy(vchiq_class);
diff --git a/drivers/staging/wlan-ng/Kconfig b/drivers/staging/wlan-ng/Kconfig
index ac136663fa8e..082c16a31616 100644
--- a/drivers/staging/wlan-ng/Kconfig
+++ b/drivers/staging/wlan-ng/Kconfig
@@ -4,6 +4,7 @@ config PRISM2_USB
 	depends on WLAN && USB && CFG80211
 	select WIRELESS_EXT
 	select WEXT_PRIV
+	select CRC32
 	help
 	  This is the wlan-ng prism 2.5/3 USB driver for a wide range of
 	  old USB wireless devices.