Merge branch 'for-l-o-3.5'

Conflicts:
	drivers/video/omap2/displays/panel-taal.c

Merge OMAP DSS related board file changes. The branch will also be
merged through linux-omap tree to solve conflicts.

19 files changed, 251 insertions, 448 deletions

diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index da75f239873e..37abb0d49b51 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -37,7 +37,7 @@
 #include <plat/dma.h>
 #include <plat/gpmc.h>
 #include <video/omapdss.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
 
 #include <plat/gpmc-smc91x.h>
 
@@ -113,9 +113,6 @@ static struct gpio sdp3430_dss_gpios[] __initdata = {
 	{SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"},
 };
 
-static int lcd_enabled;
-static int dvi_enabled;
-
 static void __init sdp3430_display_init(void)
 {
 	int r;
@@ -129,44 +126,18 @@ static void __init sdp3430_display_init(void)
 
 static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
 {
-	if (dvi_enabled) {
-		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
-		return -EINVAL;
-	}
-
 	gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1);
 	gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1);
 
-	lcd_enabled = 1;
-
 	return 0;
 }
 
 static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev)
 {
-	lcd_enabled = 0;
-
 	gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0);
 	gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0);
 }
 
-static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (lcd_enabled) {
-		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
-		return -EINVAL;
-	}
-
-	dvi_enabled = 1;
-
-	return 0;
-}
-
-static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev)
-{
-	dvi_enabled = 0;
-}
-
 static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev)
 {
 	return 0;
@@ -186,15 +157,14 @@ static struct omap_dss_device sdp3430_lcd_device = {
 	.platform_disable	= sdp3430_panel_disable_lcd,
 };
 
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable	= sdp3430_panel_enable_dvi,
-	.platform_disable	= sdp3430_panel_disable_dvi,
+static struct tfp410_platform_data dvi_panel = {
+	.power_down_gpio	= -1,
 };
 
 static struct omap_dss_device sdp3430_dvi_device = {
 	.name			= "dvi",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "dvi",
+	.driver_name		= "tfp410",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
 };
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 130ab00c09a2..b4ad706c145a 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -666,6 +666,10 @@ static struct nokia_dsi_panel_data dsi1_panel = {
 		.use_ext_te	= false,
 		.ext_te_gpio	= 101,
 		.esd_interval	= 0,
+		.pin_config = {
+			.num_pins	= 6,
+			.pins		= { 0, 1, 2, 3, 4, 5 },
+		},
 };
 
 static struct omap_dss_device sdp4430_lcd_device = {
@@ -674,13 +678,6 @@ static struct omap_dss_device sdp4430_lcd_device = {
 	.type			= OMAP_DISPLAY_TYPE_DSI,
 	.data			= &dsi1_panel,
 	.phy.dsi		= {
-		.clk_lane	= 1,
-		.clk_pol	= 0,
-		.data1_lane	= 2,
-		.data1_pol	= 0,
-		.data2_lane	= 3,
-		.data2_pol	= 0,
-
 		.module		= 0,
 	},
 
@@ -715,6 +712,10 @@ static struct nokia_dsi_panel_data dsi2_panel = {
 		.use_ext_te	= false,
 		.ext_te_gpio	= 103,
 		.esd_interval	= 0,
+		.pin_config = {
+			.num_pins	= 6,
+			.pins		= { 0, 1, 2, 3, 4, 5 },
+		},
 };
 
 static struct omap_dss_device sdp4430_lcd2_device = {
@@ -723,12 +724,6 @@ static struct omap_dss_device sdp4430_lcd2_device = {
 	.type			= OMAP_DISPLAY_TYPE_DSI,
 	.data			= &dsi2_panel,
 	.phy.dsi		= {
-		.clk_lane	= 1,
-		.clk_pol	= 0,
-		.data1_lane	= 2,
-		.data1_pol	= 0,
-		.data2_lane	= 3,
-		.data2_pol	= 0,
 
 		.module		= 1,
 	},
@@ -758,21 +753,6 @@ static struct omap_dss_device sdp4430_lcd2_device = {
 	.channel		= OMAP_DSS_CHANNEL_LCD2,
 };
 
-static void sdp4430_lcd_init(void)
-{
-	int r;
-
-	r = gpio_request_one(dsi1_panel.reset_gpio, GPIOF_DIR_OUT,
-		"lcd1_reset_gpio");
-	if (r)
-		pr_err("%s: Could not get lcd1_reset_gpio\n", __func__);
-
-	r = gpio_request_one(dsi2_panel.reset_gpio, GPIOF_DIR_OUT,
-		"lcd2_reset_gpio");
-	if (r)
-		pr_err("%s: Could not get lcd2_reset_gpio\n", __func__);
-}
-
 static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
 	.hpd_gpio = HDMI_GPIO_HPD,
 };
@@ -858,7 +838,6 @@ static void __init omap_4430sdp_display_init(void)
 	if (r)
 		pr_err("%s: Could not get display_sel GPIO\n", __func__);
 
-	sdp4430_lcd_init();
 	sdp4430_picodlp_init();
 	omap_display_init(&sdp4430_dss_data);
 	/*
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 3645285a3e2b..99790eb646e8 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -37,7 +37,7 @@
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
 
 #include "am35xx-emac.h"
 #include "mux.h"
@@ -207,31 +207,14 @@ static struct omap_dss_device am3517_evm_tv_device = {
 	.platform_disable	= am3517_evm_panel_disable_tv,
 };
 
-static int am3517_evm_panel_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (lcd_enabled) {
-		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
-		return -EINVAL;
-	}
-	dvi_enabled = 1;
-
-	return 0;
-}
-
-static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev)
-{
-	dvi_enabled = 0;
-}
-
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable	= am3517_evm_panel_enable_dvi,
-	.platform_disable	= am3517_evm_panel_disable_dvi,
+static struct tfp410_platform_data dvi_panel = {
+	.power_down_gpio	= -1,
 };
 
 static struct omap_dss_device am3517_evm_dvi_device = {
 	.type			= OMAP_DISPLAY_TYPE_DPI,
 	.name			= "dvi",
-	.driver_name		= "dvi",
+	.driver_name		= "tfp410",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
 };
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 909a8b91b564..45746cb56c68 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -44,7 +44,7 @@
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
 #include <plat/mcspi.h>
 
 #include <mach/hardware.h>
@@ -218,25 +218,6 @@ static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev)
 	gpio_set_value(CM_T35_LCD_EN_GPIO, 0);
 }
 
-static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (lcd_enabled) {
-		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
-		return -EINVAL;
-	}
-
-	gpio_set_value(CM_T35_DVI_EN_GPIO, 0);
-	dvi_enabled = 1;
-
-	return 0;
-}
-
-static void cm_t35_panel_disable_dvi(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(CM_T35_DVI_EN_GPIO, 1);
-	dvi_enabled = 0;
-}
-
 static int cm_t35_panel_enable_tv(struct omap_dss_device *dssdev)
 {
 	return 0;
@@ -260,15 +241,14 @@ static struct omap_dss_device cm_t35_lcd_device = {
 	.phy.dpi.data_lines	= 18,
 };
 
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable	= cm_t35_panel_enable_dvi,
-	.platform_disable	= cm_t35_panel_disable_dvi,
+static struct tfp410_platform_data dvi_panel = {
+	.power_down_gpio	= CM_T35_DVI_EN_GPIO,
 };
 
 static struct omap_dss_device cm_t35_dvi_device = {
 	.name			= "dvi",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "dvi",
+	.driver_name		= "tfp410",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
 };
@@ -316,7 +296,6 @@ static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = {
 static struct gpio cm_t35_dss_gpios[] __initdata = {
 	{ CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW,  "lcd enable"    },
 	{ CM_T35_LCD_BL_GPIO, GPIOF_OUT_INIT_LOW,  "lcd bl enable" },
-	{ CM_T35_DVI_EN_GPIO, GPIOF_OUT_INIT_HIGH, "dvi enable"    },
 };
 
 static void __init cm_t35_init_display(void)
@@ -335,7 +314,6 @@ static void __init cm_t35_init_display(void)
 
 	gpio_export(CM_T35_LCD_EN_GPIO, 0);
 	gpio_export(CM_T35_LCD_BL_GPIO, 0);
-	gpio_export(CM_T35_DVI_EN_GPIO, 0);
 
 	msleep(50);
 	gpio_set_value(CM_T35_LCD_EN_GPIO, 1);
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index a2010f07de31..b063f0d2faa6 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -47,7 +47,7 @@
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
 
 #include <plat/mcspi.h>
 #include <linux/input/matrix_keypad.h>
@@ -118,19 +118,6 @@ static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
 		gpio_set_value_cansleep(dssdev->reset_gpio, 0);
 }
 
-static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value_cansleep(dssdev->reset_gpio, 1);
-	return 0;
-}
-
-static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
-{
-	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value_cansleep(dssdev->reset_gpio, 0);
-}
-
 static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = {
 	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
@@ -154,15 +141,14 @@ static struct omap_dss_device devkit8000_lcd_device = {
 	.phy.dpi.data_lines     = 24,
 };
 
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable        = devkit8000_panel_enable_dvi,
-	.platform_disable       = devkit8000_panel_disable_dvi,
+static struct tfp410_platform_data dvi_panel = {
+	.power_down_gpio	= -1,
 };
 
 static struct omap_dss_device devkit8000_dvi_device = {
 	.name                   = "dvi",
 	.type                   = OMAP_DISPLAY_TYPE_DPI,
-	.driver_name            = "dvi",
+	.driver_name            = "tfp410",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines     = 24,
 };
@@ -244,13 +230,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 	}
 
 	/* gpio + 7 is "DVI_PD" (out, active low) */
-	devkit8000_dvi_device.reset_gpio = gpio + 7;
-	ret = gpio_request_one(devkit8000_dvi_device.reset_gpio,
-			       GPIOF_OUT_INIT_LOW, "DVI PowerDown");
-	if (ret < 0) {
-		devkit8000_dvi_device.reset_gpio = -EINVAL;
-		printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n");
-	}
+	dvi_panel.power_down_gpio = gpio + 7;
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 930c0d380435..04816c96e829 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -32,7 +32,7 @@
 #include <plat/gpmc.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
 #include <plat/onenand.h>
 
 #include "mux.h"
@@ -444,28 +444,15 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
 	.setup		= igep_twl_gpio_setup,
 };
 
-static int igep2_enable_dvi(struct omap_dss_device *dssdev)
-{
-	gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1);
-
-	return 0;
-}
-
-static void igep2_disable_dvi(struct omap_dss_device *dssdev)
-{
-	gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0);
-}
-
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable	= igep2_enable_dvi,
-	.platform_disable	= igep2_disable_dvi,
-	.i2c_bus_num = 3,
+static struct tfp410_platform_data dvi_panel = {
+	.i2c_bus_num		= 3,
+	.power_down_gpio	= IGEP2_GPIO_DVI_PUP,
 };
 
 static struct omap_dss_device igep2_dvi_device = {
 	.type			= OMAP_DISPLAY_TYPE_DPI,
 	.name			= "dvi",
-	.driver_name		= "dvi",
+	.driver_name		= "tfp410",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
 };
@@ -480,14 +467,6 @@ static struct omap_dss_board_info igep2_dss_data = {
 	.default_device	= &igep2_dvi_device,
 };
 
-static void __init igep2_display_init(void)
-{
-	int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH,
-				   "GPIO_DVI_PUP");
-	if (err)
-		pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n");
-}
-
 static struct platform_device *igep_devices[] __initdata = {
 	&igep_vwlan_device,
 };
@@ -668,7 +647,6 @@ static void __init igep_init(void)
 
 	if (machine_is_igep0020()) {
 		omap_display_init(&igep2_dss_data);
-		igep2_display_init();
 		igep2_init_smsc911x();
 		usbhs_init(&igep2_usbhs_bdata);
 	} else {
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 7be8d659d91d..8ede8d20d7b2 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -42,7 +42,7 @@
 #include <plat/board.h>
 #include "common.h"
 #include <video/omapdss.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
@@ -189,33 +189,17 @@ static struct mtd_partition omap3beagle_nand_partitions[] = {
 
 /* DSS */
 
-static int beagle_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value(dssdev->reset_gpio, 1);
-
-	return 0;
-}
-
-static void beagle_disable_dvi(struct omap_dss_device *dssdev)
-{
-	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value(dssdev->reset_gpio, 0);
-}
-
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable = beagle_enable_dvi,
-	.platform_disable = beagle_disable_dvi,
+static struct tfp410_platform_data dvi_panel = {
 	.i2c_bus_num = 3,
+	.power_down_gpio = -1,
 };
 
 static struct omap_dss_device beagle_dvi_device = {
 	.type = OMAP_DISPLAY_TYPE_DPI,
 	.name = "dvi",
-	.driver_name = "dvi",
+	.driver_name = "tfp410",
 	.data = &dvi_panel,
 	.phy.dpi.data_lines = 24,
-	.reset_gpio = -EINVAL,
 };
 
 static struct omap_dss_device beagle_tv_device = {
@@ -236,16 +220,6 @@ static struct omap_dss_board_info beagle_dss_data = {
 	.default_device = &beagle_dvi_device,
 };
 
-static void __init beagle_display_init(void)
-{
-	int r;
-
-	r = gpio_request_one(beagle_dvi_device.reset_gpio, GPIOF_OUT_INIT_LOW,
-			     "DVI reset");
-	if (r < 0)
-		printk(KERN_ERR "Unable to get DVI reset GPIO\n");
-}
-
 #include "sdram-micron-mt46h32m32lf-6.h"
 
 static struct omap2_hsmmc_info mmc[] = {
@@ -309,7 +283,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
 		if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
 			pr_err("%s: unable to configure EHCI_nOC\n", __func__);
 	}
-	beagle_dvi_device.reset_gpio = beagle_config.reset_gpio;
+	dvi_panel.power_down_gpio = beagle_config.reset_gpio;
 
 	gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
 			"nEN_USB_PWR");
@@ -552,7 +526,6 @@ static void __init omap3_beagle_init(void)
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 
-	beagle_display_init();
 	beagle_opp_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 49df12735b41..9919d6c1a531 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -46,7 +46,7 @@
 #include "common.h"
 #include <plat/mcspi.h>
 #include <video/omapdss.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
@@ -219,35 +219,14 @@ static struct omap_dss_device omap3_evm_tv_device = {
 	.platform_disable	= omap3_evm_disable_tv,
 };
 
-static int omap3_evm_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (lcd_enabled) {
-		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
-		return -EINVAL;
-	}
-
-	gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 1);
-
-	dvi_enabled = 1;
-	return 0;
-}
-
-static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
-{
-	gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 0);
-
-	dvi_enabled = 0;
-}
-
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable	= omap3_evm_enable_dvi,
-	.platform_disable	= omap3_evm_disable_dvi,
+static struct tfp410_platform_data dvi_panel = {
+	.power_down_gpio	= OMAP3EVM_DVI_PANEL_EN_GPIO,
 };
 
 static struct omap_dss_device omap3_evm_dvi_device = {
 	.name			= "dvi",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "dvi",
+	.driver_name		= "tfp410",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
 };
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 4dffc95bddd2..4396bae91677 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -42,7 +42,7 @@
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
 
 #include <plat/mcspi.h>
 #include <linux/input/matrix_keypad.h>
@@ -92,9 +92,6 @@ static inline void __init omap3stalker_init_eth(void)
 #define LCD_PANEL_BKLIGHT_GPIO	210
 #define ENABLE_VPLL2_DEV_GRP	0xE0
 
-static int lcd_enabled;
-static int dvi_enabled;
-
 static void __init omap3_stalker_display_init(void)
 {
 	return;
@@ -122,32 +119,14 @@ static struct omap_dss_device omap3_stalker_tv_device = {
 	.platform_disable	= omap3_stalker_disable_tv,
 };
 
-static int omap3_stalker_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (lcd_enabled) {
-		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
-		return -EINVAL;
-	}
-	gpio_set_value(DSS_ENABLE_GPIO, 1);
-	dvi_enabled = 1;
-	return 0;
-}
-
-static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(DSS_ENABLE_GPIO, 0);
-	dvi_enabled = 0;
-}
-
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable	= omap3_stalker_enable_dvi,
-	.platform_disable	= omap3_stalker_disable_dvi,
+static struct tfp410_platform_data dvi_panel = {
+	.power_down_gpio	= DSS_ENABLE_GPIO,
 };
 
 static struct omap_dss_device omap3_stalker_dvi_device = {
 	.name			= "dvi",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "dvi",
+	.driver_name		= "tfp410",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
 };
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 1b782ba53433..b26cd15f3c8b 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -42,7 +42,7 @@
 #include "common.h"
 #include <plat/usb.h>
 #include <plat/mmc.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
 
 #include "hsmmc.h"
 #include "control.h"
@@ -420,46 +420,22 @@ static struct omap_board_mux board_mux[] __initdata = {
 /* Display DVI */
 #define PANDA_DVI_TFP410_POWER_DOWN_GPIO	0
 
-static int omap4_panda_enable_dvi(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(dssdev->reset_gpio, 1);
-	return 0;
-}
-
-static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(dssdev->reset_gpio, 0);
-}
-
 /* Using generic display panel */
-static struct panel_dvi_platform_data omap4_dvi_panel = {
-	.platform_enable	= omap4_panda_enable_dvi,
-	.platform_disable	= omap4_panda_disable_dvi,
-	.i2c_bus_num = 3,
+static struct tfp410_platform_data omap4_dvi_panel = {
+	.i2c_bus_num		= 3,
+	.power_down_gpio	= PANDA_DVI_TFP410_POWER_DOWN_GPIO,
 };
 
 struct omap_dss_device omap4_panda_dvi_device = {
 	.type			= OMAP_DISPLAY_TYPE_DPI,
 	.name			= "dvi",
-	.driver_name		= "dvi",
+	.driver_name		= "tfp410",
 	.data			= &omap4_dvi_panel,
 	.phy.dpi.data_lines	= 24,
 	.reset_gpio		= PANDA_DVI_TFP410_POWER_DOWN_GPIO,
 	.channel		= OMAP_DSS_CHANNEL_LCD2,
 };
 
-int __init omap4_panda_dvi_init(void)
-{
-	int r;
-
-	/* Requesting TFP410 DVI GPIO and disabling it, at bootup */
-	r = gpio_request_one(omap4_panda_dvi_device.reset_gpio,
-				GPIOF_OUT_INIT_LOW, "DVI PD");
-	if (r)
-		pr_err("Failed to get DVI powerdown GPIO\n");
-
-	return r;
-}
 
 static struct gpio panda_hdmi_gpios[] = {
 	{ HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
@@ -511,11 +487,6 @@ static struct omap_dss_board_info omap4_panda_dss_data = {
 
 void __init omap4_panda_display_init(void)
 {
-	int r;
-
-	r = omap4_panda_dvi_init();
-	if (r)
-		pr_err("error initializing panda DVI\n");
 
 	omap_display_init(&omap4_panda_dss_data);
 
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 33aa3910b09e..5527c1979a16 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -46,7 +46,7 @@
 #include "common.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
 #include <plat/gpmc.h>
 #include <mach/hardware.h>
 #include <plat/nand.h>
@@ -167,32 +167,15 @@ static void __init overo_display_init(void)
 	gpio_export(OVERO_GPIO_LCD_BL, 0);
 }
 
-static int overo_panel_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (lcd_enabled) {
-		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
-		return -EINVAL;
-	}
-	dvi_enabled = 1;
-
-	return 0;
-}
-
-static void overo_panel_disable_dvi(struct omap_dss_device *dssdev)
-{
-	dvi_enabled = 0;
-}
-
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable	= overo_panel_enable_dvi,
-	.platform_disable	= overo_panel_disable_dvi,
+static struct tfp410_platform_data dvi_panel = {
 	.i2c_bus_num		= 3,
+	.power_down_gpio	= -1,
 };
 
 static struct omap_dss_device overo_dvi_device = {
 	.name			= "dvi",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "dvi",
+	.driver_name		= "tfp410",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
 };
diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
index 408a9927be92..c3853c92279b 100644
--- a/drivers/video/omap2/displays/Kconfig
+++ b/drivers/video/omap2/displays/Kconfig
@@ -10,12 +10,12 @@ config PANEL_GENERIC_DPI
 	  Supports LCD Panel used in TI SDP3430 and EVM boards,
 	  OMAP3517 EVM boards and CM-T35.
 
-config PANEL_DVI
-	tristate "DVI output"
+config PANEL_TFP410
+	tristate "TFP410 DPI-to-DVI chip"
 	depends on OMAP2_DSS_DPI && I2C
 	help
-	  Driver for external monitors, connected via DVI. The driver uses i2c
-	  to read EDID information from the monitor.
+	  Driver for TFP410 DPI-to-DVI chip. The driver uses i2c to read EDID
+	  information from the monitor.
 
 config PANEL_LGPHILIPS_LB035Q02
 	tristate "LG.Philips LB035Q02 LCD Panel"
diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
index fbfafc6eebb4..58a5176b07b0 100644
--- a/drivers/video/omap2/displays/Makefile
+++ b/drivers/video/omap2/displays/Makefile
@@ -1,5 +1,5 @@
 obj-$(CONFIG_PANEL_GENERIC_DPI) += panel-generic-dpi.o
-obj-$(CONFIG_PANEL_DVI) += panel-dvi.o
+obj-$(CONFIG_PANEL_TFP410) += panel-tfp410.o
 obj-$(CONFIG_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o
 obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
 obj-$(CONFIG_PANEL_NEC_NL8048HL11_01B) += panel-nec-nl8048hl11-01b.o
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 3053399faf9a..2ce9992f403b 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -912,6 +912,15 @@ static int taal_probe(struct omap_dss_device *dssdev)
 
 	dev_set_drvdata(&dssdev->dev, td);
 
+	if (gpio_is_valid(panel_data->reset_gpio)) {
+		r = gpio_request_one(panel_data->reset_gpio, GPIOF_OUT_INIT_LOW,
+				"taal rst");
+		if (r) {
+			dev_err(&dssdev->dev, "failed to request reset gpio\n");
+			goto err_rst_gpio;
+		}
+	}
+
 	taal_hw_reset(dssdev);
 
 	if (panel_data->use_dsi_backlight) {
@@ -992,6 +1001,9 @@ err_gpio:
 	if (bldev != NULL)
 		backlight_device_unregister(bldev);
 err_bl:
+	if (gpio_is_valid(panel_data->reset_gpio))
+		gpio_free(panel_data->reset_gpio);
+err_rst_gpio:
 	destroy_workqueue(td->workqueue);
 err_wq:
 	kfree(td);
@@ -1030,15 +1042,25 @@ static void __exit taal_remove(struct omap_dss_device *dssdev)
 	/* reset, to be sure that the panel is in a valid state */
 	taal_hw_reset(dssdev);
 
+	if (gpio_is_valid(panel_data->reset_gpio))
+		gpio_free(panel_data->reset_gpio);
+
 	kfree(td);
 }
 
 static int taal_power_on(struct omap_dss_device *dssdev)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 	u8 id1, id2, id3;
 	int r;
 
+	r = omapdss_dsi_configure_pins(dssdev, &panel_data->pin_config);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to configure DSI pins\n");
+		goto err0;
+	};
+
 	r = omapdss_dsi_display_enable(dssdev);
 	if (r) {
 		dev_err(&dssdev->dev, "failed to enable DSI\n");
diff --git a/drivers/video/omap2/displays/panel-dvi.c b/drivers/video/omap2/displays/panel-tfp410.c
index 03eb14af33e0..52637fa8fda8 100644
--- a/drivers/video/omap2/displays/panel-dvi.c
+++ b/drivers/video/omap2/displays/panel-tfp410.c
@@ -1,5 +1,5 @@
 /*
- * DVI output support
+ * TFP410 DPI-to-DVI chip
  *
  * Copyright (C) 2011 Texas Instruments Inc
  * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
@@ -21,11 +21,12 @@
 #include <linux/slab.h>
 #include <video/omapdss.h>
 #include <linux/i2c.h>
+#include <linux/gpio.h>
 #include <drm/drm_edid.h>
 
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
 
-static const struct omap_video_timings panel_dvi_default_timings = {
+static const struct omap_video_timings tfp410_default_timings = {
 	.x_res		= 640,
 	.y_res		= 480,
 
@@ -44,17 +45,19 @@ struct panel_drv_data {
 	struct omap_dss_device *dssdev;
 
 	struct mutex lock;
+
+	int pd_gpio;
 };
 
-static inline struct panel_dvi_platform_data
+static inline struct tfp410_platform_data
 *get_pdata(const struct omap_dss_device *dssdev)
 {
 	return dssdev->data;
 }
 
-static int panel_dvi_power_on(struct omap_dss_device *dssdev)
+static int tfp410_power_on(struct omap_dss_device *dssdev)
 {
-	struct panel_dvi_platform_data *pdata = get_pdata(dssdev);
+	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
 	int r;
 
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
@@ -64,57 +67,72 @@ static int panel_dvi_power_on(struct omap_dss_device *dssdev)
 	if (r)
 		goto err0;
 
-	if (pdata->platform_enable) {
-		r = pdata->platform_enable(dssdev);
-		if (r)
-			goto err1;
-	}
+	if (gpio_is_valid(ddata->pd_gpio))
+		gpio_set_value(ddata->pd_gpio, 1);
 
 	return 0;
-err1:
-	omapdss_dpi_display_disable(dssdev);
 err0:
 	return r;
 }
 
-static void panel_dvi_power_off(struct omap_dss_device *dssdev)
+static void tfp410_power_off(struct omap_dss_device *dssdev)
 {
-	struct panel_dvi_platform_data *pdata = get_pdata(dssdev);
+	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
 
 	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
 		return;
 
-	if (pdata->platform_disable)
-		pdata->platform_disable(dssdev);
+	if (gpio_is_valid(ddata->pd_gpio))
+		gpio_set_value(ddata->pd_gpio, 0);
 
 	omapdss_dpi_display_disable(dssdev);
 }
 
-static int panel_dvi_probe(struct omap_dss_device *dssdev)
+static int tfp410_probe(struct omap_dss_device *dssdev)
 {
+	struct tfp410_platform_data *pdata = get_pdata(dssdev);
 	struct panel_drv_data *ddata;
+	int r;
 
 	ddata = kzalloc(sizeof(*ddata), GFP_KERNEL);
 	if (!ddata)
 		return -ENOMEM;
 
-	dssdev->panel.timings = panel_dvi_default_timings;
+	dssdev->panel.timings = tfp410_default_timings;
 	dssdev->panel.config = OMAP_DSS_LCD_TFT;
 
 	ddata->dssdev = dssdev;
 	mutex_init(&ddata->lock);
 
+	if (pdata)
+		ddata->pd_gpio = pdata->power_down_gpio;
+	else
+		ddata->pd_gpio = -1;
+
+	if (gpio_is_valid(ddata->pd_gpio)) {
+		r = gpio_request_one(ddata->pd_gpio, GPIOF_OUT_INIT_LOW,
+				"tfp410 pd");
+		if (r) {
+			dev_err(&dssdev->dev, "Failed to request PD GPIO %d\n",
+					ddata->pd_gpio);
+			ddata->pd_gpio = -1;
+		}
+	}
+
 	dev_set_drvdata(&dssdev->dev, ddata);
 
 	return 0;
 }
 
-static void __exit panel_dvi_remove(struct omap_dss_device *dssdev)
+static void __exit tfp410_remove(struct omap_dss_device *dssdev)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
 
 	mutex_lock(&ddata->lock);
 
+	if (gpio_is_valid(ddata->pd_gpio))
+		gpio_free(ddata->pd_gpio);
+
 	dev_set_drvdata(&dssdev->dev, NULL);
 
 	mutex_unlock(&ddata->lock);
@@ -122,14 +140,14 @@ static void __exit panel_dvi_remove(struct omap_dss_device *dssdev)
 	kfree(ddata);
 }
 
-static int panel_dvi_enable(struct omap_dss_device *dssdev)
+static int tfp410_enable(struct omap_dss_device *dssdev)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
 	int r;
 
 	mutex_lock(&ddata->lock);
 
-	r = panel_dvi_power_on(dssdev);
+	r = tfp410_power_on(dssdev);
 	if (r == 0)
 		dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
@@ -138,26 +156,26 @@ static int panel_dvi_enable(struct omap_dss_device *dssdev)
 	return r;
 }
 
-static void panel_dvi_disable(struct omap_dss_device *dssdev)
+static void tfp410_disable(struct omap_dss_device *dssdev)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
 
 	mutex_lock(&ddata->lock);
 
-	panel_dvi_power_off(dssdev);
+	tfp410_power_off(dssdev);
 
 	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
 
 	mutex_unlock(&ddata->lock);
 }
 
-static int panel_dvi_suspend(struct omap_dss_device *dssdev)
+static int tfp410_suspend(struct omap_dss_device *dssdev)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
 
 	mutex_lock(&ddata->lock);
 
-	panel_dvi_power_off(dssdev);
+	tfp410_power_off(dssdev);
 
 	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
 
@@ -166,14 +184,14 @@ static int panel_dvi_suspend(struct omap_dss_device *dssdev)
 	return 0;
 }
 
-static int panel_dvi_resume(struct omap_dss_device *dssdev)
+static int tfp410_resume(struct omap_dss_device *dssdev)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
 	int r;
 
 	mutex_lock(&ddata->lock);
 
-	r = panel_dvi_power_on(dssdev);
+	r = tfp410_power_on(dssdev);
 	if (r == 0)
 		dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
@@ -182,7 +200,7 @@ static int panel_dvi_resume(struct omap_dss_device *dssdev)
 	return r;
 }
 
-static void panel_dvi_set_timings(struct omap_dss_device *dssdev,
+static void tfp410_set_timings(struct omap_dss_device *dssdev,
 		struct omap_video_timings *timings)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
@@ -192,7 +210,7 @@ static void panel_dvi_set_timings(struct omap_dss_device *dssdev,
 	mutex_unlock(&ddata->lock);
 }
 
-static void panel_dvi_get_timings(struct omap_dss_device *dssdev,
+static void tfp410_get_timings(struct omap_dss_device *dssdev,
 		struct omap_video_timings *timings)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
@@ -202,7 +220,7 @@ static void panel_dvi_get_timings(struct omap_dss_device *dssdev,
 	mutex_unlock(&ddata->lock);
 }
 
-static int panel_dvi_check_timings(struct omap_dss_device *dssdev,
+static int tfp410_check_timings(struct omap_dss_device *dssdev,
 		struct omap_video_timings *timings)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
@@ -216,7 +234,7 @@ static int panel_dvi_check_timings(struct omap_dss_device *dssdev,
 }
 
 
-static int panel_dvi_ddc_read(struct i2c_adapter *adapter,
+static int tfp410_ddc_read(struct i2c_adapter *adapter,
 		unsigned char *buf, u16 count, u8 offset)
 {
 	int r, retries;
@@ -247,11 +265,11 @@ static int panel_dvi_ddc_read(struct i2c_adapter *adapter,
 	return r < 0 ? r : -EIO;
 }
 
-static int panel_dvi_read_edid(struct omap_dss_device *dssdev,
+static int tfp410_read_edid(struct omap_dss_device *dssdev,
 		u8 *edid, int len)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
-	struct panel_dvi_platform_data *pdata = get_pdata(dssdev);
+	struct tfp410_platform_data *pdata = get_pdata(dssdev);
 	struct i2c_adapter *adapter;
 	int r, l, bytes_read;
 
@@ -271,7 +289,7 @@ static int panel_dvi_read_edid(struct omap_dss_device *dssdev,
 	}
 
 	l = min(EDID_LENGTH, len);
-	r = panel_dvi_ddc_read(adapter, edid, l, 0);
+	r = tfp410_ddc_read(adapter, edid, l, 0);
 	if (r)
 		goto err;
 
@@ -281,7 +299,7 @@ static int panel_dvi_read_edid(struct omap_dss_device *dssdev,
 	if (len > EDID_LENGTH && edid[0x7e] > 0) {
 		l = min(EDID_LENGTH, len - EDID_LENGTH);
 
-		r = panel_dvi_ddc_read(adapter, edid + EDID_LENGTH,
+		r = tfp410_ddc_read(adapter, edid + EDID_LENGTH,
 				l, EDID_LENGTH);
 		if (r)
 			goto err;
@@ -298,10 +316,10 @@ err:
 	return r;
 }
 
-static bool panel_dvi_detect(struct omap_dss_device *dssdev)
+static bool tfp410_detect(struct omap_dss_device *dssdev)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
-	struct panel_dvi_platform_data *pdata = get_pdata(dssdev);
+	struct tfp410_platform_data *pdata = get_pdata(dssdev);
 	struct i2c_adapter *adapter;
 	unsigned char out;
 	int r;
@@ -315,7 +333,7 @@ static bool panel_dvi_detect(struct omap_dss_device *dssdev)
 	if (!adapter)
 		goto out;
 
-	r = panel_dvi_ddc_read(adapter, &out, 1, 0);
+	r = tfp410_ddc_read(adapter, &out, 1, 0);
 
 	mutex_unlock(&ddata->lock);
 
@@ -326,38 +344,38 @@ out:
 	return true;
 }
 
-static struct omap_dss_driver panel_dvi_driver = {
-	.probe		= panel_dvi_probe,
-	.remove		= __exit_p(panel_dvi_remove),
+static struct omap_dss_driver tfp410_driver = {
+	.probe		= tfp410_probe,
+	.remove		= __exit_p(tfp410_remove),
 
-	.enable		= panel_dvi_enable,
-	.disable	= panel_dvi_disable,
-	.suspend	= panel_dvi_suspend,
-	.resume		= panel_dvi_resume,
+	.enable		= tfp410_enable,
+	.disable	= tfp410_disable,
+	.suspend	= tfp410_suspend,
+	.resume		= tfp410_resume,
 
-	.set_timings	= panel_dvi_set_timings,
-	.get_timings	= panel_dvi_get_timings,
-	.check_timings	= panel_dvi_check_timings,
+	.set_timings	= tfp410_set_timings,
+	.get_timings	= tfp410_get_timings,
+	.check_timings	= tfp410_check_timings,
 
-	.read_edid	= panel_dvi_read_edid,
-	.detect		= panel_dvi_detect,
+	.read_edid	= tfp410_read_edid,
+	.detect		= tfp410_detect,
 
 	.driver         = {
-		.name   = "dvi",
+		.name   = "tfp410",
 		.owner  = THIS_MODULE,
 	},
 };
 
-static int __init panel_dvi_init(void)
+static int __init tfp410_init(void)
 {
-	return omap_dss_register_driver(&panel_dvi_driver);
+	return omap_dss_register_driver(&tfp410_driver);
 }
 
-static void __exit panel_dvi_exit(void)
+static void __exit tfp410_exit(void)
 {
-	omap_dss_unregister_driver(&panel_dvi_driver);
+	omap_dss_unregister_driver(&tfp410_driver);
 }
 
-module_init(panel_dvi_init);
-module_exit(panel_dvi_exit);
+module_init(tfp410_init);
+module_exit(tfp410_exit);
 MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 95bc9964ab9c..446e13667471 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -2045,65 +2045,6 @@ static unsigned dsi_get_line_buf_size(struct platform_device *dsidev)
 	}
 }
 
-static int dsi_parse_lane_config(struct omap_dss_device *dssdev)
-{
-	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
-	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
-	u8 lanes[DSI_MAX_NR_LANES];
-	u8 polarities[DSI_MAX_NR_LANES];
-	int num_lanes, i;
-
-	static const enum dsi_lane_function functions[] = {
-		DSI_LANE_CLK,
-		DSI_LANE_DATA1,
-		DSI_LANE_DATA2,
-		DSI_LANE_DATA3,
-		DSI_LANE_DATA4,
-	};
-
-	lanes[0] = dssdev->phy.dsi.clk_lane;
-	lanes[1] = dssdev->phy.dsi.data1_lane;
-	lanes[2] = dssdev->phy.dsi.data2_lane;
-	lanes[3] = dssdev->phy.dsi.data3_lane;
-	lanes[4] = dssdev->phy.dsi.data4_lane;
-	polarities[0] = dssdev->phy.dsi.clk_pol;
-	polarities[1] = dssdev->phy.dsi.data1_pol;
-	polarities[2] = dssdev->phy.dsi.data2_pol;
-	polarities[3] = dssdev->phy.dsi.data3_pol;
-	polarities[4] = dssdev->phy.dsi.data4_pol;
-
-	num_lanes = 0;
-
-	for (i = 0; i < dsi->num_lanes_supported; ++i)
-		dsi->lanes[i].function = DSI_LANE_UNUSED;
-
-	for (i = 0; i < dsi->num_lanes_supported; ++i) {
-		int num;
-
-		if (lanes[i] == DSI_LANE_UNUSED)
-			break;
-
-		num = lanes[i] - 1;
-
-		if (num >= dsi->num_lanes_supported)
-			return -EINVAL;
-
-		if (dsi->lanes[num].function != DSI_LANE_UNUSED)
-			return -EINVAL;
-
-		dsi->lanes[num].function = functions[i];
-		dsi->lanes[num].polarity = polarities[i];
-		num_lanes++;
-	}
-
-	if (num_lanes < 2 || num_lanes > dsi->num_lanes_supported)
-		return -EINVAL;
-
-	dsi->num_lanes_used = num_lanes;
-
-	return 0;
-}
-
 static int dsi_set_lane_config(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
@@ -3944,6 +3885,74 @@ static void dsi_proto_timings(struct omap_dss_device *dssdev)
 	}
 }
 
+int omapdss_dsi_configure_pins(struct omap_dss_device *dssdev,
+		const struct omap_dsi_pin_config *pin_cfg)
+{
+	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+	int num_pins;
+	const int *pins;
+	struct dsi_lane_config lanes[DSI_MAX_NR_LANES];
+	int num_lanes;
+	int i;
+
+	static const enum dsi_lane_function functions[] = {
+		DSI_LANE_CLK,
+		DSI_LANE_DATA1,
+		DSI_LANE_DATA2,
+		DSI_LANE_DATA3,
+		DSI_LANE_DATA4,
+	};
+
+	num_pins = pin_cfg->num_pins;
+	pins = pin_cfg->pins;
+
+	if (num_pins < 4 || num_pins > dsi->num_lanes_supported * 2
+			|| num_pins % 2 != 0)
+		return -EINVAL;
+
+	for (i = 0; i < DSI_MAX_NR_LANES; ++i)
+		lanes[i].function = DSI_LANE_UNUSED;
+
+	num_lanes = 0;
+
+	for (i = 0; i < num_pins; i += 2) {
+		u8 lane, pol;
+		int dx, dy;
+
+		dx = pins[i];
+		dy = pins[i + 1];
+
+		if (dx < 0 || dx >= dsi->num_lanes_supported * 2)
+			return -EINVAL;
+
+		if (dy < 0 || dy >= dsi->num_lanes_supported * 2)
+			return -EINVAL;
+
+		if (dx & 1) {
+			if (dy != dx - 1)
+				return -EINVAL;
+			pol = 1;
+		} else {
+			if (dy != dx + 1)
+				return -EINVAL;
+			pol = 0;
+		}
+
+		lane = dx / 2;
+
+		lanes[lane].function = functions[i / 2];
+		lanes[lane].polarity = pol;
+		num_lanes++;
+	}
+
+	memcpy(dsi->lanes, lanes, sizeof(dsi->lanes));
+	dsi->num_lanes_used = num_lanes;
+
+	return 0;
+}
+EXPORT_SYMBOL(omapdss_dsi_configure_pins);
+
 int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
@@ -4301,12 +4310,6 @@ static int dsi_display_init_dsi(struct omap_dss_device *dssdev)
 	int dsi_module = dsi_get_dsidev_id(dsidev);
 	int r;
 
-	r = dsi_parse_lane_config(dssdev);
-	if (r) {
-		DSSERR("illegal lane config");
-		goto err0;
-	}
-
 	r = dsi_pll_init(dsidev, true, true);
 	if (r)
 		goto err0;
diff --git a/include/video/omap-panel-nokia-dsi.h b/include/video/omap-panel-nokia-dsi.h
index 7dc71f9c13e6..04219a295539 100644
--- a/include/video/omap-panel-nokia-dsi.h
+++ b/include/video/omap-panel-nokia-dsi.h
@@ -11,6 +11,7 @@ struct omap_dss_device;
  * @esd_interval: interval of ESD checks, 0 = disabled (ms)
  * @ulps_timeout: time to wait before entering ULPS, 0 = disabled (ms)
  * @use_dsi_backlight: true if panel uses DSI command to control backlight
+ * @pin_config: DSI pin configuration
  */
 struct nokia_dsi_panel_data {
 	const char *name;
@@ -24,6 +25,8 @@ struct nokia_dsi_panel_data {
 	unsigned ulps_timeout;
 
 	bool use_dsi_backlight;
+
+	struct omap_dsi_pin_config pin_config;
 };
 
 #endif /* __OMAP_NOKIA_DSI_PANEL_H */
diff --git a/include/video/omap-panel-dvi.h b/include/video/omap-panel-tfp410.h
index 87ad567b4229..68c31d79c571 100644
--- a/include/video/omap-panel-dvi.h
+++ b/include/video/omap-panel-tfp410.h
@@ -1,5 +1,5 @@
 /*
- * Header for DVI output driver
+ * Header for TFP410 chip driver
  *
  * Copyright (C) 2011 Texas Instruments Inc
  * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
@@ -17,21 +17,19 @@
  * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef __OMAP_PANEL_DVI_H
-#define __OMAP_PANEL_DVI_H
+#ifndef __OMAP_PANEL_TFP410_H
+#define __OMAP_PANEL_TFP410_H
 
 struct omap_dss_device;
 
 /**
- * struct panel_dvi_platform_data - panel driver configuration data
- * @platform_enable: platform specific panel enable function
- * @platform_disable: platform specific panel disable function
+ * struct tfp410_platform_data - panel driver configuration data
  * @i2c_bus_num: i2c bus id for the panel
+ * @power_down_gpio: gpio number for PD pin (or -1 if not available)
  */
-struct panel_dvi_platform_data {
-	int (*platform_enable)(struct omap_dss_device *dssdev);
-	void (*platform_disable)(struct omap_dss_device *dssdev);
+struct tfp410_platform_data {
 	u16 i2c_bus_num;
+	int power_down_gpio;
 };
 
-#endif /* __OMAP_PANEL_DVI_H */
+#endif /* __OMAP_PANEL_TFP410_H */
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index 5f36ddd0e295..1cbb2dd5fbba 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -469,6 +469,21 @@ struct omap_overlay_manager {
 	int (*wait_for_vsync)(struct omap_overlay_manager *mgr);
 };
 
+/* 22 pins means 1 clk lane and 10 data lanes */
+#define OMAP_DSS_MAX_DSI_PINS 22
+
+struct omap_dsi_pin_config {
+	int num_pins;
+	/*
+	 * pin numbers in the following order:
+	 * clk+, clk-
+	 * data1+, data1-
+	 * data2+, data2-
+	 * ...
+	 */
+	int pins[OMAP_DSS_MAX_DSI_PINS];
+};
+
 struct omap_dss_device {
 	struct device dev;
 
@@ -491,17 +506,6 @@ struct omap_dss_device {
 		} sdi;
 
 		struct {
-			u8 clk_lane;
-			u8 clk_pol;
-			u8 data1_lane;
-			u8 data1_pol;
-			u8 data2_lane;
-			u8 data2_pol;
-			u8 data3_lane;
-			u8 data3_pol;
-			u8 data4_lane;
-			u8 data4_pol;
-
 			int module;
 
 			bool ext_te;
@@ -690,6 +694,8 @@ int omap_dsi_update(struct omap_dss_device *dssdev, int channel,
 int omap_dsi_request_vc(struct omap_dss_device *dssdev, int *channel);
 int omap_dsi_set_vc_id(struct omap_dss_device *dssdev, int channel, int vc_id);
 void omap_dsi_release_vc(struct omap_dss_device *dssdev, int channel);
+int omapdss_dsi_configure_pins(struct omap_dss_device *dssdev,
+		const struct omap_dsi_pin_config *pin_cfg);
 
 int omapdss_dsi_display_enable(struct omap_dss_device *dssdev);
 void omapdss_dsi_display_disable(struct omap_dss_device *dssdev,