diff options
Diffstat (limited to 'qt/qdbusabstractadaptor.cpp')
| -rw-r--r-- | qt/qdbusabstractadaptor.cpp | 767 |
1 files changed, 758 insertions, 9 deletions
diff --git a/qt/qdbusabstractadaptor.cpp b/qt/qdbusabstractadaptor.cpp index 335469e..4d6217a 100644 --- a/qt/qdbusabstractadaptor.cpp +++ b/qt/qdbusabstractadaptor.cpp @@ -26,19 +26,622 @@ #include <QtCore/qmetaobject.h> #include <QtCore/qtimer.h> +#include "qdbusconnection.h" + +#include "qdbusconnection_p.h" // for qDBusParametersForMethod +#include "qdbusabstractadaptor_p.h" + +/*! + \internal +*/ +struct QDBusAdaptorInit +{ + QSignalSpyCallbackSet callbacks; + QDBusAdaptorInit() + { + extern void qt_register_signal_spy_callbacks(const QSignalSpyCallbackSet &callback_set); + callbacks.signal_begin_callback = QDBusAdaptorConnector::signalBeginCallback; + callbacks.signal_end_callback = QDBusAdaptorConnector::signalEndCallback; + callbacks.slot_begin_callback = 0; + callbacks.slot_end_callback = 0; + qt_register_signal_spy_callbacks(callbacks); + + //QDBusAdaptorConnector::id = QObject::registerUserData(); + } +}; + +Q_GLOBAL_STATIC(QDBusAdaptorInit, qAdaptorInit) + +QDBusAdaptorConnector *qDBusFindAdaptorConnector(QObject *obj) +{ + qAdaptorInit(); + +#if 0 + if (caller->metaObject() == QDBusAdaptorConnector::staticMetaObject) + return 0; // it's a QDBusAdaptorConnector +#endif + + if (!obj) + return 0; + QDBusAdaptorConnector *connector = qFindChild<QDBusAdaptorConnector *>(obj); + if (connector) + connector->polish(); + return connector; +} + +QDBusAdaptorConnector *qDBusCreateAdaptorConnector(QObject *obj) +{ + qAdaptorInit(); + + QDBusAdaptorConnector *connector = qDBusFindAdaptorConnector(obj); + if (connector) + return connector; + return new QDBusAdaptorConnector(obj); +} + +QString QDBusAbstractAdaptorPrivate::retrieveIntrospectionXml(QDBusAbstractAdaptor *adaptor) +{ + return adaptor->d->xml; +} + +void QDBusAbstractAdaptorPrivate::saveIntrospectionXml(QDBusAbstractAdaptor *adaptor, + const QString &xml) +{ + adaptor->d->xml = xml; +} + +/*! + \page UsingAdaptors Using Adaptors + + Adaptors are special classes that are attached to any QObject-derived class and provide the + interface to the external world using D-Bus. Adaptors are intended to be light-weight classes + whose main purpose is to relay calls to and from the real object, possibly validating or + converting the input from the external world and, thus, protecting the real object. + + Unlike multiple inheritance, adaptors can be added at any time to any object (but not removed), + which allows for greater flexibility when exporting existing classes. Another advantage of + adaptors is to provide similar but not identical functionality in methods of the same name in + different interfaces, a case which can be quite common when adding a new version of a standard + interface to an object. + + In order to use an adaptor, one must create a class which inherits QDBusAbstractAdaptor. Since + that is a standard QObject-derived class, the Q_OBJECT macro must appear in the declaration and + the source file must be processed with the \link moc \endlink tool. The class must also contain + one or more Q_CLASSINFO entries with the "D-Bus Interface" name, declaring which interfaces it + is exporting. + + Any public slot in the class will be accessible through the bus over messages of the MethodCall + type. (See \link DeclaringSlots \endlink for more information). Signals in the class will be + automatically relayed over D-Bus. However, not all types are allowed signals or slots' parameter + lists: see \link AllowedParameters \endlink for more information. + + Also, any property declared with Q_PROPERTY will be automatically exposed over the Properties + interface on D-Bus. Since the QObject property system does not allow for non-readable + properties, it is not possible to declare write-only properties using adaptors. + + More information: + - \subpage DeclaringSlots + - \subpage DeclaringSignals + - \subpage AllowedParameters + - \subpage UsingAnnotations + - \subpage AdaptorExample + + \sa QDBusAbstractAdaptor +*/ + +/*! + \page AdaptorExample Example of an interface implemented with an adaptor + + A sample usage of QDBusAbstractAdaptor is as follows: + \code + class MainApplicationAdaptor: public QDBusAbstractAdaptor + { + Q_OBJECT + Q_CLASSINFO("D-Bus Interface", "com.example.DBus.MainApplication") + Q_CLASSINFO("D-Bus Interface", "org.kde.DBus.MainApplication") + Q_PROPERTY(QString caption READ caption WRITE setCaption) + Q_PROPERTY(QString organizationName READ organizationName) + Q_PROPERTY(QString organizationDomain READ organizationDomain) + + private: + MyApplication *app; + + public: + MyInterfaceAdaptor(MyApplication *application) + : QDBusAbstractAdaptor(application), app(application) + { + connect(application, SIGNAL(aboutToQuit()), SIGNAL(aboutToQuit()); + connect(application, SIGNAL(focusChanged(QWidget*, QWidget*)), + SLOT(focusChangedSlot(QWidget*, QWidget*))); + } + + QString caption() + { + if (app->hasMainWindow()) + return app->mainWindow()->caption(); + return QString(); + } + + void setCaption(const QString &newCaption) + { + if (app->hasMainWindow()) + app->mainWindow()->setCaption(newCaption); + } + + QString organizationName() + { + return app->organizationName(); + } + + QString organizationDomain() + { + return app->organizationDomain(); + } + + public slots: + async void quit() + { app->quit(); } + + void reparseConfiguration() + { app->reparseConfiguration(); } + + QString mainWindowObject() + { + if (app->hasMainWindow()) + return QString("/%1/mainwindow").arg(app->applicationName()); + return QString(); + } + + void setSessionManagement(bool enable) + { + if (enable) + app->enableSessionManagement(); + else + app->disableSessionManagement(); + } + + private slots: + void focusChangedSlot(QWidget *, QWidget *now) + { + if (now == app->mainWindow()) + emit mainWindowHasFocus(); + } + + signals: + void aboutToQuit(); + void mainWindowHasFocus(); + }; + \endcode + + The code above would create an interface that could be represented more or less in the following + canonical representation: + \code + interface com.example.DBus.MainApplication + { + property readwrite STRING caption + property read STRING organizationName + property read STRING organizationDomain + + method quit() annotation("org.freedesktop.DBus.Method.NoReply", "true") + method reparseConfiguration() + method mainWindowObject(out STRING) + method disableSessionManagement(in BOOLEAN enable) + + signal aboutToQuit() + signal mainWindowHasFocus() + } + + interface org.kde.DBus.MainApplication + { + .... + } + \endcode + + This adaptor could be used in the application's constructor as follows: + \code + MyApplication::MyApplication() + { + [...] + + // create the MainApplication adaptor: + new MainApplicationAdaptor(this); + + // connect to D-Bus: + QDBusConnection connection = QDBusConnection::addConnection(QDBusConnection::SessionBus); + + // register us as an object: + connection.registerObject("/MainApplication", this); + + [...] + } + \endcode + + Break-down analysis: + - \subpage AdaptorExampleHeader + - \subpage AdaptorExampleProperties + - \subpage AdaptorExampleConstructor + - \subpage AdaptorExampleSlots + - \subpage AdaptorExampleSignals +*/ + +/*! + \page AdaptorExampleHeader The header + + The header of the example is: + \code + class MainApplicationAdaptor: public QDBusAbstractAdaptor + { + Q_OBJECT + Q_CLASSINFO("D-Bus Interface", "com.example.DBus.MainApplication") + Q_CLASSINFO("D-Bus Interface", "org.kde.DBus.MainApplication") + \endcode + + The code does the following: + - it declares the adaptor MainApplicationAdaptor, which descends from QDBusAbstractAdaptor + - it declares the Qt Meta Object data using the #Q_OBJECT macro + - it declares the names of two D-Bus interfaces it implements. Those interfaces are equal in all + aspects. +*/ + +/*! + \page AdaptorExampleProperties The properties + + The properties are declared as follows: + \code + Q_PROPERTY(QString caption READ caption WRITE setCaption) + Q_PROPERTY(QString organizationName READ organizationName) + Q_PROPERTY(QString organizationDomain READ organizationDomain) + \endcode + + And are implemented as follows: + \code + QString caption() + { + if (app->hasMainWindow()) + return app->mainWindow()->caption(); + return QString(); + } + + void setCaption(const QString &newCaption) + { + if (app->hasMainWindow()) + app->mainWindow()->setCaption(newCaption); + } + + QString organizationName() + { + return app->organizationName(); + } + + QString organizationDomain() + { + return app->organizationDomain(); + } + \endcode + + The code declares three properties: one of them is a read-write property called "caption" of + string type. The other two are read-only, also of the string type. + + The properties organizationName and organizationDomain are simple relays of the app object's + organizationName and organizationDomain properties. However, the caption property requires + verifying if the application has a main window associated with it: if there isn't any, the + caption property is empty. Note how it is possible to access data defined in other objects + through the getter/setter functions. + */ + +/*! + \page AdaptorExampleConstructor The constructor + + The constructor: + \code + MyInterfaceAdaptor(MyApplication *application) + : QDBusAbstractAdaptor(application), app(application) + { + connect(application, SIGNAL(aboutToQuit()), SIGNAL(aboutToQuit()); + connect(application, SIGNAL(focusChanged(QWidget*, QWidget*)), + SLOT(focusChangedSlot(QWidget*, QWidget*))); + } + \endcode + + The constructor does the following: + - it initialises its base class (QDBusAbstractAdaptor) with the parent object it is related to. + - it stores the app pointer in a member variable. Note that it would be possible to access the + same object using the QDBusAbstractAdaptor::object() function, but it would be necessary to + use \a static_cast<> to properly access the methods in MyApplication that are not part of + QObject. + - it connects the application's signal \a aboutToQuit to its own signal \a aboutToQuit. + - it connects the application's signal \a focusChanged to a private slot to do some further + processing before emitting a D-Bus signal. + + Note that there is no destructor in the example. An eventual destructor could be used to emit + one last signal before the object is destroyed, for instance. +*/ + +/*! + \page AdaptorExampleSlots Slots/methods + + The public slots in the example (which will be exported as D-Bus methods) are the following: + \code + public slots: + async void quit() + { app->quit(); } + + void reparseConfiguration() + { app->reparseConfiguration(); } + + QString mainWindowObject() + { + if (app->hasMainWindow()) + return QString("/%1/mainwindow").arg(app->applicationName()); + return QString(); + } + + void setSessionManagement(bool enable) + { + if (enable) + app->enableSessionManagement(); + else + app->disableSessionManagement(); + } + \endcode + + This snippet of code defines 4 methods with different properties each: + - \p quit: this method takes no parameters and is defined to be asynchronous. That is, callers + are expected to use "fire-and-forget" mechanism when calling this method, since it provides no + useful reply. This is represented in D-Bus by the use of the + org.freedesktop.DBus.Method.NoReply annotation. See #Q_ASYNC for more information on + asynchronous methods + + - \p reparseConfiguration: this simple method, with no input or output arguments simply relays + the call to the application's reparseConfiguration member function. + + - \p mainWindowObject: this method takes no input parameter, but returns one string output + argument, containing the path to the main window object (if the application has a main + window), or an empty string if it has no main window. Note that this method could have also + been written: void mainWindowObject(QString &path). + + - \p setSessionManagement: this method takes one input argument (a boolean) and, depending on + its value, it calls one function or another in the application. + + \sa #Q_ASYNC +*/ + +/*! + \page AdaptorExampleSignals Signals + + The signals in this example are defined as follows: + \code + signals: + void aboutToQuit(); + void mainWindowHasFocus(); + \endcode + + However, signal definition isn't enough: signals have to be emitted. One simple way of emitting + signals is to connect another signal to them, so that Qt's signal handling system chains them + automatically. This is what is done for the \a aboutToQuit signal (see \ref + AdaptorExampleConstructor). + + When this is the case, one can use the QDBusAbstractAdaptor::setAutoRelaySignals to + automatically connect every signal from the real object to the adaptor. + + When simple signal-to-signal connection isn't enough, one can use a private slot do do some + work. This is what was done for the mainWindowHasFocus signal: + \code + private slots: + void focusChangedSlot(QWidget *, QWidget *now) + { + if (now == app->mainWindow()) + emit mainWindowHasFocus(); + } + \endcode + + This private slot (which will not be exported as a method via D-Bus) was connected to the + \a focusChanged signal in the adaptor's constructor. It is therefore able to shape the + application's signal into what the interface expects it to be. +*/ + +/*! + \page DeclaringSlots Declaring slots + + Slots in D-Bus adaptors are declared just like normal, public slots, but their parameters must + follow certain rules (see \ref AllowedParameters for more information). Slots whose parameters + do not follow those rules or that are not public will not be accessible via D-Bus. + + Slots can be of three kinds: + -# Asynchronous + -# Input-only + -# Input-and-output + + \par Asynchronous slots + Asynchronous slots are those that do not normally return any reply to the caller. For that + reason, they cannot take any output parameters. In most cases, by the time the first line + of the slot is run, the caller function has already resumed working. + + \par + However, slots must rely on that behavior. Scheduling and message-dispatching issues could + change the order in which the slot is run. Code intending to synchronize with the caller + should provide its own method of synchronization. + + \par + Asynchronous slots are marked by the keyword \p #async or \p #Q_ASYNC in the method + signature, before the \p void return type and the slot name. (See the \p quit slot in the + \ref AdaptorExample "adaptor example"). + + \par Input-only slots + Input-only slots are normal slots that take parameters passed by value or by constant + reference. However, unlike asynchronous slots, the caller is usually waiting for completion + of the callee before resuming operation. Therefore, non-asynchronous slots should not block + or should state it its documentation that they may do so. + + \par + Input-only slots have no special marking in their signature, except that they take only + parameters passed by value or by constant reference. Optionally, slots can take a + QDBusMessage parameter as a last parameter, which can be used to perform additional + analysis of the method call message. + + \par Input and output slots + Like input-only slots, input-and-output slots are those that the caller is waiting for a + reply. Unlike input-only ones, though, this reply will contain data. Slots that output data + may contain non-constant references and may return a value as well. However, the output + parameters must all appear at the end of the argument list and may not have input arguments + interleaved. Optionally, a QDBusMessage argument may appear between the input and the + output arguments. + + \note When a caller places a method call and waits for a reply, it will only wait for so long. + Slots intending to take a long time to complete should make that fact clear in + documentation so that callers properly set higher timeouts. + + Method replies are generated automatically with the contents of the output parameters (if there + were any) by the QtDBus implementation. Slots need not worry about constructing proper + QDBusMessage objects and sending them over the connection. + + However, the possibility of doing so remains there. Should the slot find out it needs to send a + special reply or even an error, it can do so by using QDBusMessage::methodReply or + QDBusMessage::error on the QDBusMessage parameter and send it with QDBusConnection::send. The + QtDBus implementation will not generate any reply if the slot did so. + + \sa \ref UsingAdaptors, \ref DeclaringSignals, \ref AllowedParameters, QDBusConnection, + QDBusMessage +*/ + +/*! + \page DeclaringSignals Declaring signals + + Any signal in a class derived from QDBusAbstractAdaptor will be automatically relayed into + D-Bus, provided that the signal's parameters conform to certain rules (see \ref + AllowedParameters for more information). No special code is necessary to make this relay. + + However, signals must still be emitted. The easiest way to emit an adaptor signal is to connect + another signal to it, so that the Qt signal/slot mechanism automatically emits the adaptor + signal too. This can be done in the adaptor's constructor, as has been done in the \ref + AdaptorExample "adaptor example". + + The convenience function QDBusAbstractAdaptor::setAutoRelaySignals can also be used to connect + or disconnect every signal in the real object to the same signal in the adaptor. It will inspect + the list of signals in both classes and connect those that have exact parameter match. + + \sa \ref UsingAdaptors, \ref DeclaringSlots, \ref AllowedParameters, QDBusAbstractAdaptor +*/ + +/*! + \page AllowedParameters Allowed parameter types + + D-Bus has a very limited set of types that can be sent and received over the bus. They are + listed below, along with the D-Bus type they relate to: + - unsigned char / uchar (BYTE) + - short (INT16) + - unsigned short / ushort (UINT16) + - int (INT32) + - unsigned int / uint (UINT32) + - qlonglong (INT64) + - qulonglong (UINT64) + - bool (BOOLEAN) + - double (DOUBLE) + - QString (STRING) + - QByteArray (ARRAY of BYTE) + - QStringList (ARRAY of STRING) + - QVariant / QDBusVariant (VARIANT) + - QVariantList (ARRAY of VARIANT) + - QVariantMap (ARRAY of DICT_ENTRY of (STRING, VARIANT)) + + The last two types may be used to receive any array (except string and byte arrays), any structs + and any maps. However, it is currently not possible to generate external function definitions + containing specific types of lists, structs and maps. + + All of the types above may be passed by value or by constant reference for input arguments to + slots as well as the output arguments to signals. When used as output arguments for slots, they + can all be used as non-constant references or the return type. + + Additionally, slots can have one parameter of type \p const \p QDBusMessage \p \&, which must + appear at the end of the input parameter list, before any output parameters. Signals cannot have + this parameter. + + \warning You may not use any type that is not on the list above, including \a typedefs to the + types listed. This also includes QList<QVariant> and QMap<QString,QVariant>. +*/ + +/*! + \page UsingAnnotations Using annotations in adaptors + + It is currently not possible to specify arbitrary annotations in adaptors. +*/ + +/*! + \class QDBusAbstractAdaptor + \brief Abstract adaptor for D-Bus adaptor classes. + + The QDBusAbstractAdaptor class is the starting point for all objects intending to provide + interfaces to the external world using D-Bus. This is accomplished by attaching a one or more + classes derived from QDBusAbstractAdaptor to a normal QObject and then registering that QObject + with QDBusConnection::registerObject. QDBusAbstractAdaptor objects are intended to be + light-weight wrappers, mostly just relaying calls into the real object (see object()) and the + signals from it. + + Each QDBusAbstractAdaptor-derived class should define the D-Bus interface it is implementing + using the Q_CLASSINFO macro in the class definition. + + QDBusAbstractAdaptor uses the standard QObject mechanism of signals, slots and properties to + determine what signals, methods and properties to export to the bus. Any signal emitted by + QDBusAbstractAdaptor-derived classes will be automatically be relayed through any D-Bus + connections the object is registered on. + + Classes derived from QDBusAbstractAdaptor must be created on the heap using the \a new operator + and must not be deleted by the user (they will be deleted automatically when the object they are + connected to is also deleted). + + \sa \ref UsingAdaptors, QDBusConnection +*/ + +/*! + Constructs a QDBusAbstractAdaptor with \a parent as the object we refer to. + + \param parent the real object we're the adaptor for + + \warning Use object() to retrieve the object passed as \a parent to this constructor. The real + parent object (as retrieved by QObject::parent()) may be something else. +*/ QDBusAbstractAdaptor::QDBusAbstractAdaptor(QObject* parent) - : QObject(parent) + : d(new QDBusAbstractAdaptorPrivate) { - QTimer::singleShot(0, this, SLOT(polish())); + QDBusAdaptorConnector *connector = qDBusCreateAdaptorConnector(parent); + setParent(connector); + + connector->waitingForPolish = true; + QTimer::singleShot(0, connector, SLOT(polish())); } +/*! + Destroys the adaptor. + + \warning Adaptors are destroyed automatically when the real object they refer to is + destroyed. Do not delete the adaptors yourself. +*/ QDBusAbstractAdaptor::~QDBusAbstractAdaptor() { + delete d; +} + +/*! + Returns the QObject that we're the adaptor for. This is the same object that was passed as an + argument to the QDBusAbstractAdaptor constructor. +*/ +QObject* QDBusAbstractAdaptor::object() const +{ + return parent()->parent(); } +/*! + Toggles automatic signal relaying from the real object (see object()). + + Automatic signal relaying consists of signal-to-signal connection of the signals on the parent + that have the exact same method signatue in both classes. + + \param enable if set to true, connect the signals; if set to false, disconnect all signals +*/ void QDBusAbstractAdaptor::setAutoRelaySignals(bool enable) { const QMetaObject *us = metaObject(); + const QMetaObject *them = parent()->metaObject(); for (int idx = staticMetaObject.methodCount(); idx < us->methodCount(); ++idx) { QMetaMethod mm = us->method(idx); @@ -46,19 +649,165 @@ void QDBusAbstractAdaptor::setAutoRelaySignals(bool enable) continue; // try to connect/disconnect to a signal on the parent that has the same method signature - QByteArray sig = mm.signature(); + QByteArray sig = QMetaObject::normalizedSignature(mm.signature()); + if (them->indexOfSignal(sig) == -1) + continue; sig.prepend(QSIGNAL_CODE + '0'); + object()->disconnect(sig, this, sig); if (enable) - connect(parent(), sig, sig); - else - parent()->disconnect(sig, this, sig); + connect(object(), sig, sig, Qt::QueuedConnection); + } +} + +QDBusAdaptorConnector::QDBusAdaptorConnector(QObject *parent) + : QObject(parent), waitingForPolish(false), lastSignalIdx(0), argv(0) +{ +} + +QDBusAdaptorConnector::~QDBusAdaptorConnector() +{ +} + +void QDBusAdaptorConnector::addAdaptor(QDBusAbstractAdaptor *adaptor) +{ + // find the interface name + const QMetaObject *mo = adaptor->metaObject(); + while (mo != &QDBusAbstractAdaptor::staticMetaObject) { + int ciend = mo->classInfoCount(); + for (int i = mo->classInfoOffset(); i < ciend; ++i) { + QMetaClassInfo mci = mo->classInfo(i); + if (strcmp(mci.name(), QCLASSINFO_DBUS_INTERFACE) == 0 && *mci.value()) { + // find out if this interface exists first + QString interface = QString::fromUtf8(mci.value()); + AdaptorMap::Iterator it = qLowerBound(adaptors.begin(), adaptors.end(), interface); + if (it != adaptors.end() && it->interface == interface) { + // exists. Replace it (though it's probably the same) + it->adaptor = adaptor; + it->metaObject = mo; + } else { + // create a new one + AdaptorData entry; + entry.interface = interface; + entry.adaptor = adaptor; + entry.metaObject = mo; + adaptors << entry; + } + } + } + + mo = mo->superClass(); + } + + // connect the adaptor's signals to our relaySlot slot + mo = adaptor->metaObject(); + for (int i = QDBusAbstractAdaptor::staticMetaObject.methodCount(); + i < mo->methodCount(); ++i) { + QMetaMethod mm = mo->method(i); + + if (mm.methodType() != QMetaMethod::Signal) + continue; + + QByteArray sig = mm.signature(); + sig.prepend(QSIGNAL_CODE + '0'); + disconnect(adaptor, sig, this, SLOT(relaySlot())); + connect(adaptor, sig, this, SLOT(relaySlot())); } } -void QDBusAbstractAdaptor::polish() +void QDBusAdaptorConnector::polish() { - // future work: - // connect every signal in this adaptor to a slot that will relay them into D-Bus + if (!waitingForPolish) + return; // avoid working multiple times if multiple adaptors were added + + waitingForPolish = false; + const QObjectList &objs = children(); + foreach (QObject *obj, objs) { + Q_ASSERT(qobject_cast<QDBusAbstractAdaptor *>(obj)); + + QDBusAbstractAdaptor *adaptor = static_cast<QDBusAbstractAdaptor *>(obj); + addAdaptor(adaptor); + } + + // sort the adaptor list + qSort(adaptors); +} + +void QDBusAdaptorConnector::relaySlot() +{ + relay(sender()); +} + +void QDBusAdaptorConnector::relay(QObject *sender) +{ + // we're being called because there is a signal being emitted that we must relay + Q_ASSERT(lastSignalIdx); + Q_ASSERT(argv); + Q_ASSERT(senderMetaObject); + + if (senderMetaObject != sender->metaObject()) { + qWarning("Inconsistency detected: QDBusAdaptorConnector::relay got called with unexpected sender object!"); + } else { + QMetaMethod mm = senderMetaObject->method(lastSignalIdx); + QObject *object = static_cast<QDBusAbstractAdaptor *>(sender)->object(); + + // break down the parameter list + QList<int> types; + QByteArray signature = QMetaObject::normalizedSignature(mm.signature()); + int inputCount = qDBusParametersForMethod(signature, types); + if (inputCount == -1) + // invalid signal signature + // qDBusParametersForMethod has already complained + return; + if (inputCount + 1 != types.count() || + types.at(inputCount) == QDBusConnectionPrivate::messageMetaType) { + // invalid signal signature + // qDBusParametersForMethod has not yet complained about this one + qWarning("Cannot relay signal %s::%s", senderMetaObject->className(), mm.signature()); + return; + } + + signature.truncate(signature.indexOf('(')); // remove parameter decoration + + QVariantList args; + for (int i = 1; i < types.count(); ++i) + args << QVariant(types.at(i), argv[i]); + + // find all the interfaces this signal belongs to + for (const QMetaObject *mo = senderMetaObject; mo != &QDBusAbstractAdaptor::staticMetaObject; + mo = mo->superClass()) { + if (lastSignalIdx < mo->methodOffset()) + break; + + for (int i = mo->classInfoOffset(); i < mo->classInfoCount(); ++i) { + QMetaClassInfo mci = mo->classInfo(i); + if (qstrcmp(mci.name(), QCLASSINFO_DBUS_INTERFACE) == 0 && *mci.value()) + // now emit the signal with all the information + emit relaySignal(object, mci.value(), signature.constData(), args); + } + } + } +} + +void QDBusAdaptorConnector::signalBeginCallback(QObject *caller, int method_index, void **argv) +{ + QDBusAdaptorConnector *data = qobject_cast<QDBusAdaptorConnector *>(caller->parent()); + if (data) { + data->lastSignalIdx = method_index; + data->argv = argv; + data->senderMetaObject = caller->metaObject(); + data->polish(); // make sure it's polished + } +} + +void QDBusAdaptorConnector::signalEndCallback(QObject *caller, int) +{ + QDBusAdaptorConnector *data = qobject_cast<QDBusAdaptorConnector *>(caller->parent()); + if (data) { + data->lastSignalIdx = 0; + data->argv = 0; + data->senderMetaObject = 0; + } } #include "qdbusabstractadaptor.moc" +#include "qdbusabstractadaptor_p.moc" |