summaryrefslogtreecommitdiff
path: root/drivers/usb/serial
AgeCommit message (Collapse)AuthorFilesLines
2015-03-25USB: ftdi_sio: Use jtag quirk for SNAP Connect E10Doug Goldstein1-2/+6
This patch uses the existing CALAO Systems ftdi_8u2232c_probe in order to avoid attaching a TTY to the JTAG port as this board is based on the CALAO Systems reference design and needs the same fix up. Signed-off-by: Doug Goldstein <cardoe@cardoe.com> CC: stable <stable@vger.kernel.org> [johan: clean up probe logic ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-03-19USB: keyspan_pda: add new device idNathaniel W Filardo1-0/+3
Add USB VID/PID for Xircom PGMFHUB USB/serial component. (The hub and SCSI bridge on that hardware are recognized out of the box by existing drivers.) Tested VID/PID using new_id and loopback connection and was met with success, but that's all the testing done. Signed-off-by: Nathaniel Wesley Filardo <nwf@cs.jhu.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-03-16USB: ftdi_sio: Added custom PID for Synapse Wireless productDoug Goldstein2-0/+7
Synapse Wireless uses the FTDI VID with a custom PID of 0x9090 for their SNAP Stick 200 product. Signed-off-by: Doug Goldstein <cardoe@cardoe.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-03-08Merge tag 'usb-4.0-rc3' of ↵Linus Torvalds9-43/+105
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here's a round of USB fixes for 4.0-rc3. Nothing major, the usual gadget, xhci and usb-serial fixes and a few new device ids as well. All have been in linux-next successfully" * tag 'usb-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (36 commits) xhci: Workaround for PME stuck issues in Intel xhci xhci: fix reporting of 0-sized URBs in control endpoint usb: ftdi_sio: Add jtag quirk support for Cyber Cortex AV boards USB: ch341: set tty baud speed according to tty struct USB: serial: cp210x: Adding Seletek device id's USB: pl2303: disable break on shutdown USB: mxuport: fix null deref when used as a console USB: serial: clean up bus probe error handling USB: serial: fix port attribute-creation race USB: serial: fix tty-device error handling at probe USB: serial: fix potential use-after-free after failed probe USB: console: add dummy __module_get USB: ftdi_sio: add PIDs for Actisense USB devices Revert "USB: serial: make bulk_out_size a lower limit" cdc-acm: Add support for Denso cradle CU-321 usb-storage: support for more than 8 LUNs uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS539 USB: usbfs: don't leak kernel data in siginfo xhci: Clear the host side toggle manually when endpoint is 'soft reset' xhci: Allocate correct amount of scratchpad buffers ...
2015-03-07USB: serial: fix infinite wait_until_sent timeoutJohan Hovold1-2/+3
Make sure to handle an infinite timeout (0). Note that wait_until_sent is currently never called with a 0-timeout argument due to a bug in tty_wait_until_sent. Fixes: dcf010503966 ("USB: serial: add generic wait_until_sent implementation") Cc: stable <stable@vger.kernel.org> # v3.10 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-03usb: ftdi_sio: Add jtag quirk support for Cyber Cortex AV boardsMax Mansfield2-0/+5
This patch integrates Cyber Cortex AV boards with the existing ftdi_jtag_quirk in order to use serial port 0 with JTAG which is required by the manufacturers' software. Steps: 2 [ftdi_sio_ids.h] 1. Defined the device PID [ftdi_sio.c] 2. Added a macro declaration to the ids array, in order to enable the jtag quirk for the device. Signed-off-by: Max Mansfield <max.m.mansfield@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-03-02USB: ch341: set tty baud speed according to tty structNicolas PLANEL1-9/+6
The ch341_set_baudrate() function initialize the device baud speed according to the value on priv->baud_rate. By default the ch341_open() set it to a hardcoded value (DEFAULT_BAUD_RATE 9600). Unfortunately, the tty_struct is not initialized with the same default value. (usually 56700) This means that the tty_struct and the device baud rate generator are not synchronized after opening the port. Fixup is done by calling ch341_set_termios() if tty exist. Remove unnecessary variable priv->baud_rate setup as it's already done by ch341_port_probe(). Remove unnecessary call to ch341_set_{handshake,baudrate}() in ch341_open() as there already called in ch341_configure() and ch341_set_termios() Signed-off-by: Nicolas PLANEL <nicolas.planel@enovance.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-27USB: serial: cp210x: Adding Seletek device id'sMichiel vd Garde1-0/+2
These device ID's are not associated with the cp210x module currently, but should be. This patch allows the devices to operate upon connecting them to the usb bus as intended. Signed-off-by: Michiel van de Garde <mgparser@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26USB: pl2303: disable break on shutdownJohan Hovold1-5/+13
Currently an enabled break state is not disabled on final close nor on re-open and has to be disabled manually. Fix this by disabling break on port shutdown. Reported-by: Jari Ruusu <jariruusu@users.sourceforge.net> Tested-by: Jari Ruusu <jariruusu@users.sourceforge.net> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26USB: mxuport: fix null deref when used as a consoleJohan Hovold1-1/+2
Fix null-pointer dereference at probe when the device is used as a console, in which case the tty argument to open will be NULL. Fixes: ee467a1f2066 ("USB: serial: add Moxa UPORT 12XX/14XX/16XX driver") Cc: stable <stable@vger.kernel.org> # v3.14 Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Greg Kroah-Hartman <greg@kroah.com>
2015-02-26USB: serial: clean up bus probe error handlingJohan Hovold1-11/+14
Clean up bus probe error handling by separating success and error paths. Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26USB: serial: fix port attribute-creation raceJohan Hovold2-19/+16
Fix attribute-creation race with userspace by using the port device groups field to create the port attributes. Also use %u when printing the port number, which is unsigned, even though we do not currently support more than 128 ports per device. Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Greg Kroah-Hartman <greg@kroah.com>
2015-02-26USB: serial: fix tty-device error handling at probeJohan Hovold1-1/+10
Add missing error handling when registering the tty device at port probe. This avoids trying to remove an uninitialised character device when the port device is removed. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Takashi Iwai <tiwai@suse.de> Cc: stable <stable@vger.kernel.org> # v2.6.12 Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Greg Kroah-Hartman <greg@kroah.com>
2015-02-26USB: serial: fix potential use-after-free after failed probeJohan Hovold1-1/+1
Fix return value in probe error path, which could end up returning success (0) on errors. This could in turn lead to use-after-free or double free (e.g. in port_remove) when the port device is removed. Fixes: c706ebdfc895 ("USB: usb-serial: call port_probe and port_remove at the right times") Cc: stable <stable@vger.kernel.org> # v2.6.31 Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Greg Kroah-Hartman <greg@kroah.com>
2015-02-26USB: console: add dummy __module_getJohan Hovold1-0/+2
Add call to __module_get when initialising the fake tty in usb_console_setup to match the module_put in release_one_tty. Note that the tty-driver (i.e. usb-serial core) must be compiled-in to enable the usb console so the __module_get is essentially a noop as driver->owner will be null. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26USB: ftdi_sio: add PIDs for Actisense USB devicesMark Glover2-0/+37
These product identifiers (PID) all deal with marine NMEA format data used on motor boats and yachts. We supply the programmed devices to Chetco, for use inside their equipment. The PIDs are a direct copy of our Windows device drivers (FTDI drivers with altered PIDs). Signed-off-by: Mark Glover <mark@actisense.com> Cc: stable <stable@vger.kernel.org> [johan: edit commit message slightly ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26Revert "USB: serial: make bulk_out_size a lower limit"Johan Hovold1-2/+3
This reverts commit 5083fd7bdfe6760577235a724cf6dccae13652c2. A bulk-out size smaller than the end-point size is indeed valid. The offending commit broke the usb-debug driver for EHCI debug devices, which use 8-byte buffers. Fixes: 5083fd7bdfe6 ("USB: serial: make bulk_out_size a lower limit") Reported-by: "Li, Elvin" <elvin.li@intel.com> Cc: stable <stable@vger.kernel.org> # v3.15 Signed-off-by: Johan Hovold <johan@kernel.org>
2015-01-30Merge tag 'usb-serial-3.19-rc7' of ↵Greg Kroah-Hartman1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next USB-serial fixes for v3.19-rc7 Just another device id for cp210x. Signed-off-by: Johan Hovold <johan@kernel.org>
2015-01-26USB: cp210x: add ID for RUGGEDCOM USB Serial ConsoleLennart Sorensen1-0/+1
Added the USB serial console device ID for Siemens Ruggedcom devices which have a USB port for their serial console. Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-01-19USB: mos7840: remove unused codeColin Ian King1-60/+0
There is old, unused code that is #defined out by the use of NOTMOS7840 and NOTMCS7840 - these are not defined anywhere. If NOTMOS7840 is defined then the code will break on null pointer dereferences on mos7840_port. So the code is currently unused, and broken anyway, so why not just remove it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-01-19USB: option: clean up blacklist handlingJohan Hovold1-46/+14
Clean up the unnecessarily complicated blacklist implementation somewhat. Signed-off-by: Johan Hovold <johan@kernel.org>
2015-01-12usb: serial: handle -ENODEV quietly in generic_submit_read_urbJeremiah Mahler1-1/+1
If a USB serial device (e.g. /dev/ttyUSB0) with an active program is unplugged, an -ENODEV (19) error will be produced after it gives up trying to resubmit a read. usb_serial_generic_submit_read_urb - usb_submit_urb failed: -19 Add -ENODEV as one of the permanent errors along with -EPERM that usb_serial_generic_submit_read_urb() handles quietly without an error. Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-01-12usb: serial: silence all non-critical read errorsJeremiah Mahler1-1/+1
If a USB serial device is unplugged while there is an active program using the device it may spam the logs with -EPROTO (71) messages as it attempts to retry. Most serial usb drivers (metro-usb, pl2303, mos7840, ...) only output these messages for debugging. The generic driver treats these as errors. Change the default output for the generic serial driver from error to debug to silence these non-critical errors. Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-01-10USB: console: fix potential use after freeJohan Hovold1-5/+10
Use tty kref to release the fake tty in usb_console_setup to avoid use after free if the underlying serial driver has acquired a reference. Note that using the tty destructor release_one_tty requires some more state to be initialised. Fixes: 4a90f09b20f4 ("tty: usb-serial krefs") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-01-10USB: console: fix uninitialised ldisc semaphoreJohan Hovold1-0/+1
The USB console currently allocates a temporary fake tty which is used to pass terminal settings to the underlying serial driver. The tty struct is not fully initialised, something which can lead to a lockdep warning (or worse) if a serial driver tries to acquire a line-discipline reference: usbserial: USB Serial support registered for pl2303 pl2303 1-2.1:1.0: pl2303 converter detected usb 1-2.1: pl2303 converter now attached to ttyUSB0 INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 68 Comm: udevd Tainted: G W 3.18.0-rc5 #10 [<c0016f04>] (unwind_backtrace) from [<c0013978>] (show_stack+0x20/0x24) [<c0013978>] (show_stack) from [<c0449794>] (dump_stack+0x24/0x28) [<c0449794>] (dump_stack) from [<c006f730>] (__lock_acquire+0x1e50/0x2004) [<c006f730>] (__lock_acquire) from [<c0070128>] (lock_acquire+0xe4/0x18c) [<c0070128>] (lock_acquire) from [<c027c6f8>] (ldsem_down_read_trylock+0x78/0x90) [<c027c6f8>] (ldsem_down_read_trylock) from [<c027a1cc>] (tty_ldisc_ref+0x24/0x58) [<c027a1cc>] (tty_ldisc_ref) from [<c0340760>] (usb_serial_handle_dcd_change+0x48/0xe8) [<c0340760>] (usb_serial_handle_dcd_change) from [<bf000484>] (pl2303_read_int_callback+0x210/0x220 [pl2303]) [<bf000484>] (pl2303_read_int_callback [pl2303]) from [<c031624c>] (__usb_hcd_giveback_urb+0x80/0x140) [<c031624c>] (__usb_hcd_giveback_urb) from [<c0316fc0>] (usb_giveback_urb_bh+0x98/0xd4) [<c0316fc0>] (usb_giveback_urb_bh) from [<c0042e44>] (tasklet_hi_action+0x9c/0x108) [<c0042e44>] (tasklet_hi_action) from [<c0042380>] (__do_softirq+0x148/0x42c) [<c0042380>] (__do_softirq) from [<c00429cc>] (irq_exit+0xd8/0x114) [<c00429cc>] (irq_exit) from [<c007ae58>] (__handle_domain_irq+0x84/0xdc) [<c007ae58>] (__handle_domain_irq) from [<c000879c>] (omap_intc_handle_irq+0xd8/0xe0) [<c000879c>] (omap_intc_handle_irq) from [<c0014544>] (__irq_svc+0x44/0x7c) Exception stack(0xdf4e7f08 to 0xdf4e7f50) 7f00: debc0b80 df4e7f5c 00000000 00000000 debc0b80 be8da96c 7f20: 00000000 00000128 c000fc84 df4e6000 00000000 df4e7f94 00000004 df4e7f50 7f40: c038ebc0 c038d74c 600f0013 ffffffff [<c0014544>] (__irq_svc) from [<c038d74c>] (___sys_sendmsg.part.29+0x0/0x2e0) [<c038d74c>] (___sys_sendmsg.part.29) from [<c038ec08>] (SyS_sendmsg+0x18/0x1c) [<c038ec08>] (SyS_sendmsg) from [<c000fa00>] (ret_fast_syscall+0x0/0x48) console [ttyUSB0] enabled Fixes: 36697529b5bb ("tty: Replace ldisc locking with ldisc_sem") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-01-07USB: qcserial/option: make AT URCs work for Sierra Wireless MC73xxReinhard Speyerer2-2/+10
As has been discussed in the thread starting with https://lkml.kernel.org/g/549748e9.d+SiJzqu50f1r4lSAL043YSc@arcor.de Sierra Wireless MC73xx devices with USB VID/PID 0x1199:0x68c0 require the option_send_setup() code to be used on the USB interface for the AT port to make unsolicited response codes work correctly. Move these devices from the qcserial driver where they have been added by commit 70a3615fc07c2330ed7c1e922f3c44f4a67c0762 ("usb: qcserial: add Sierra Wireless MC73xx") to the option driver and add a MC73xx-specific blacklist to ensure that 1. the sendsetup code is not used for the DIAG/DM and NMEA interfaces 2. the option driver does not attach to the QMI/network interfaces Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-01-06USB: cp210x: add IDs for CEL USB sticks and MeshWorks devicesDavid Peterson1-1/+3
Added virtual com port VID/PID entries for CEL USB sticks and MeshWorks devices. Signed-off-by: David Peterson <david.peterson@cel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-01-02USB: keyspan: fix null-deref at probeJohan Hovold1-5/+15
Fix null-pointer dereference during probe if the interface-status completion handler is called before the individual ports have been set up. Fixes: f79b2d0fe81e ("USB: keyspan: fix NULL-pointer dereferences and memory leaks") Reported-by: Richard <richjunk@pacbell.net> Tested-by: Richard <richjunk@pacbell.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-01-02USB: cp210x: fix ID for production CEL MeshConnect USB StickPreston Fick1-1/+1
Fixing typo for MeshConnect IDs. The original PID (0x8875) is not in production and is not needed. Instead it has been changed to the official production PID (0x8857). Signed-off-by: Preston Fick <pffick@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-12-14Merge tag 'usb-3.19-rc1' of ↵Linus Torvalds7-19/+59
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big set of USB and PHY patches for 3.19-rc1. The normal churn in the USB gadget area is in here, as well as xhci and other individual USB driver updates. The PHY tree is also in here, as there were dependancies on the USB tree. All of these have been in linux-next" * tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (351 commits) arm: omap3: twl: remove usb phy init data usbip: fix error handling in stub_probe() usb: gadget: udc: missing curly braces USB: mos7720: delete some unneeded code wusb: replace memset by memzero_explicit usbip: remove unneeded structure usb: xhci: fix comment for PORT_DEV_REMOVE xhci: don't use the same variable for stopped and halted rings current TD xhci: clear extra bits from slot context when setting max exit latency xhci: cleanup finish_td function USB: adutux: NULL dereferences on disconnect usb: chipidea: fix platform_no_drv_owner.cocci warnings usb: chipidea: Fixed a few typos in comments Documentation: bindings: add doc for the USB2 ChipIdea USB driver usb: chipidea: add a usb2 driver for ci13xxx usb: chipidea: fix phy handling usb: chipidea: remove duplicate dev_set_drvdata for host_start usb: chipidea: parameter 'mode' isn't needed for hw_device_reset usb: chipidea: add controller reset API usb: chipidea: remove flag CI_HDRC_REQUIRE_TRANSCEIVER ...
2014-12-12Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree update from Jiri Kosina: "Usual stuff: documentation updates, printk() fixes, etc" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits) intel_ips: fix a type in error message cpufreq: cpufreq-dt: Move newline to end of error message ps3rom: fix error return code treewide: fix typo in printk and Kconfig ARM: dts: bcm63138: change "interupts" to "interrupts" Replace mentions of "list_struct" to "list_head" kernel: trace: fix printk message scsi: mpt2sas: fix ioctl in comment zbud, zswap: change module author email clocksource: Fix 'clcoksource' typo in comment arm: fix wording of "Crotex" in CONFIG_ARCH_EXYNOS3 help gpio: msm-v1: make boolean argument more obvious usb: Fix typo in usb-serial-simple.c PCI: Fix comment typo 'COMFIG_PM_OPS' powerpc: Fix comment typo 'CONIFG_8xx' powerpc: Fix comment typos 'CONFiG_ALTIVEC' clk: st: Spelling s/stucture/structure/ isci: Spelling s/stucture/structure/ usb: gadget: zero: Spelling s/infrastucture/infrastructure/ treewide: Fix company name in module descriptions ...
2014-12-02USB: mos7720: delete some unneeded codeDan Carpenter1-4/+0
The "status" is uninitialized so this creates a static checker warning. But it's harmless, we can just delete it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-30Merge 3.18-rc7 into usb-nextGreg Kroah-Hartman5-50/+131
We need the xhci fixes here and this resolves a merge issue with drivers/usb/dwc3/ep0.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26Merge tag 'usb-serial-3.19-rc1' of ↵Greg Kroah-Hartman7-15/+59
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for v3.19-rc1 These changes add a new "simple" driver for Google USB-serial devices and add support for Huawei Gobi modems to qcserial. Included are also some removals of unnecessary atomic allocations and a few spelling fixes. Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-20Merge Linus' tree to be be to apply submitted patches to newer code thanJiri Kosina19-407/+171
current trivial.git base
2014-11-19USB: ssu100: fix overrun-error reportingJohan Hovold1-8/+3
Fix reporting of overrun errors, which should only be reported once using the inserted null character. Fixes: 6b8f1ca5581b ("USB: ssu100: set tty_flags in ssu100_process_packet") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-19USB: keyspan: fix overrun-error reportingJohan Hovold1-10/+11
Fix reporting of overrun errors, which are not associated with a character. Instead insert a null character and report only once. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-19USB: keyspan: fix tty line-status reportingJohan Hovold1-28/+48
Fix handling of TTY error flags, which are not bitmasks and must specifically not be ORed together as this prevents the line discipline from recognising them. Also insert null characters when reporting overrun errors as these are not associated with the received character. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-19USB: qcserial: Add support for HP lt4112 LTE/HSPA+ Gobi 4G ModemMartin Hauke1-0/+33
Added new device layout "DEVICE_HWI" and also added the USB VID/PID for the HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) Signed-off-by: Martin Hauke <mardnh@gmx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-19usb: serial: ftdi_sio: add PIDs for Matrix Orbital productsTroy Clark2-4/+68
Add PIDs for new Matrix Orbital GTT series products. Signed-off-by: Troy Clark <tclark@matrixorbital.ca> Cc: stable <stable@vger.kernel.org> [johan: shorten commit message ] Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-10USB: serial: cp210x: add IDs for CEL MeshConnect USB StickPreston Fick1-0/+1
Signed-off-by: Preston Fick <pffick@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-04USB: serial: add Google simple serial SubClass supportAnton Staaf2-0/+11
Add support for Google devices that export simple serial interfaces using the vendor specific SubClass/Protocol pair 0x50/0x01. Signed-off-by: Anton Staaf <robotboy@chromium.org> Reviewed-by: Benson Leung <bleung@chromium.org> [johan: move id entries and update Kconfig] Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-03USB: mos7840: replace unnecessary atomic allocationsJohan Hovold1-2/+2
Use GFP_KERNEL instead of GFP_ATOMIC for allocations in set_termios and port-setting helper which both may and do sleep. Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-03USB: mos7720: replace unnecessary atomic allocationsJohan Hovold1-2/+2
Use GFP_KERNEL instead of GFP_ATOMIC for allocations in set_termios and port-setting helper which both may and do sleep. Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-03USB: kobil_sct: replace unnecessary atomic allocationJohan Hovold1-1/+1
Use GFP_KERNEL instead of GFP_ATOMIC for allocation in open(), which may sleep. Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-03USB: opticon: fix non-atomic allocation in write pathJohan Hovold1-1/+1
Write may be called from interrupt context so make sure to use GFP_ATOMIC for all allocations in write. Fixes: 0d930e51cfe6 ("USB: opticon: Add Opticon OPN2001 write support") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-03USB: kobil_sct: fix non-atomic allocation in write pathJohan Hovold1-2/+3
Write may be called from interrupt context so make sure to use GFP_ATOMIC for all allocations in write. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-10-29usb: Fix typo in usb-serial-simple.cRoman Mindalev1-1/+1
Signed-off-by: Roman Mindalev <r000n@r000n.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-23usb: serial: ftdi_sio: add "bricked" FTDI device PIDPerry Hung2-0/+7
An official recent Windows driver from FTDI detects counterfeit devices and reprograms the internal EEPROM containing the USB PID to 0, effectively bricking the device. Add support for this VID/PID pair to correctly bind the driver on these devices. See: http://hackaday.com/2014/10/22/watch-that-windows-update-ftdi-drivers-are-killing-fake-chips/ Signed-off-by: Perry Hung <iperry@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-10-22USB: serial: keyspan_pda: fix Entrega company name spellingMark Knibbs2-10/+10
Entrega is misspelled as Entregra or Entrgra, so fix that. Signed-off-by: Mark Knibbs <markk@clara.co.uk> Signed-off-by: Johan Hovold <johan@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 23:38:15 +0000