diff options
Diffstat (limited to 'arch/ppc/platforms/4xx/ibmstb4.h')
| -rw-r--r-- | arch/ppc/platforms/4xx/ibmstb4.h | 235 |
1 files changed, 0 insertions, 235 deletions
diff --git a/arch/ppc/platforms/4xx/ibmstb4.h b/arch/ppc/platforms/4xx/ibmstb4.h deleted file mode 100644 index 31a08abaa4a2..000000000000 --- a/arch/ppc/platforms/4xx/ibmstb4.h +++ /dev/null @@ -1,235 +0,0 @@ -/* - * Author: Armin Kuster <akuster@mvista.com> - * - * 2001 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_IBMSTB4_H__ -#define __ASM_IBMSTB4_H__ - - -/* serial port defines */ -#define STB04xxx_IO_BASE ((uint)0xe0000000) -#define PPC4xx_PCI_IO_ADDR STB04xxx_IO_BASE -#define PPC4xx_ONB_IO_PADDR STB04xxx_IO_BASE -#define PPC4xx_ONB_IO_VADDR ((uint)0xe0000000) -#define PPC4xx_ONB_IO_SIZE ((uint)14*64*1024) - -/* - * map STB04xxx internal i/o address (0x400x00xx) to an address - * which is below the 2GB limit... - * - * 4000 000x uart1 -> 0xe000 000x - * 4001 00xx ppu - * 4002 00xx smart card - * 4003 000x iic - * 4004 000x uart0 - * 4005 0xxx timer - * 4006 00xx gpio - * 4007 00xx smart card - * 400b 000x iic - * 400c 000x scp - * 400d 000x modem - * 400e 000x uart2 -*/ -#define STB04xxx_MAP_IO_ADDR(a) (((uint)(a)) + (STB04xxx_IO_BASE - 0x40000000)) - -#define RS_TABLE_SIZE 3 -#define UART0_INT 20 - -#ifdef __BOOTER__ -#define UART0_IO_BASE 0x40040000 -#else -#define UART0_IO_BASE 0xe0040000 -#endif - -#define UART1_INT 21 - -#ifdef __BOOTER__ -#define UART1_IO_BASE 0x40000000 -#else -#define UART1_IO_BASE 0xe0000000 -#endif - -#define UART2_INT 31 -#ifdef __BOOTER__ -#define UART2_IO_BASE 0x400e0000 -#else -#define UART2_IO_BASE 0xe00e0000 -#endif - -#define IDE0_BASE 0x400F0000 -#define IDE0_SIZE 0x200 -#define IDE0_IRQ 25 -#define IIC0_BASE 0x40030000 -#define IIC1_BASE 0x400b0000 -#define OPB0_BASE 0x40000000 -#define GPIO0_BASE 0x40060000 - -#define USB0_BASE 0x40010000 -#define USB0_SIZE 0xA0 -#define USB0_IRQ 18 - -#define IIC_NUMS 2 -#define UART_NUMS 3 -#define IIC0_IRQ 9 -#define IIC1_IRQ 10 -#define IIC_OWN 0x55 -#define IIC_CLOCK 50 - -#define BD_EMAC_ADDR(e,i) bi_enetaddr[i] - -#define STD_UART_OP(num) \ - { 0, BASE_BAUD, 0, UART##num##_INT, \ - (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ - iomem_base: (u8 *)UART##num##_IO_BASE, \ - io_type: SERIAL_IO_MEM}, - -#if defined(CONFIG_UART0_TTYS0) -#define SERIAL_DEBUG_IO_BASE UART0_IO_BASE -#define SERIAL_PORT_DFNS \ - STD_UART_OP(0) \ - STD_UART_OP(1) \ - STD_UART_OP(2) -#endif - -#if defined(CONFIG_UART0_TTYS1) -#define SERIAL_DEBUG_IO_BASE UART2_IO_BASE -#define SERIAL_PORT_DFNS \ - STD_UART_OP(1) \ - STD_UART_OP(0) \ - STD_UART_OP(2) -#endif - -#if defined(CONFIG_UART0_TTYS2) -#define SERIAL_DEBUG_IO_BASE UART2_IO_BASE -#define SERIAL_PORT_DFNS \ - STD_UART_OP(2) \ - STD_UART_OP(0) \ - STD_UART_OP(1) -#endif - -#define DCRN_BE_BASE 0x090 -#define DCRN_DMA0_BASE 0x0C0 -#define DCRN_DMA1_BASE 0x0C8 -#define DCRN_DMA2_BASE 0x0D0 -#define DCRN_DMA3_BASE 0x0D8 -#define DCRNCAP_DMA_CC 1 /* have DMA chained count capability */ -#define DCRN_DMASR_BASE 0x0E0 -#define DCRN_PLB0_BASE 0x054 -#define DCRN_PLB1_BASE 0x064 -#define DCRN_POB0_BASE 0x0B0 -#define DCRN_SCCR_BASE 0x120 -#define DCRN_UIC0_BASE 0x040 -#define DCRN_BE_BASE 0x090 -#define DCRN_DMA0_BASE 0x0C0 -#define DCRN_DMA1_BASE 0x0C8 -#define DCRN_DMA2_BASE 0x0D0 -#define DCRN_DMA3_BASE 0x0D8 -#define DCRN_CIC_BASE 0x030 -#define DCRN_DMASR_BASE 0x0E0 -#define DCRN_EBIMC_BASE 0x070 -#define DCRN_DCRX_BASE 0x020 -#define DCRN_CPMFR_BASE 0x102 -#define DCRN_SCCR_BASE 0x120 -#define UIC0 DCRN_UIC0_BASE - -#define IBM_CPM_IIC0 0x80000000 /* IIC 0 interface */ -#define IBM_CPM_USB0 0x40000000 /* IEEE-1284 */ -#define IBM_CPM_IIC1 0x20000000 /* IIC 1 interface */ -#define IBM_CPM_CPU 0x10000000 /* PPC405B3 clock control */ -#define IBM_CPM_AUD 0x08000000 /* Audio Decoder */ -#define IBM_CPM_EBIU 0x04000000 /* External Bus Interface Unit */ -#define IBM_CPM_SDRAM1 0x02000000 /* SDRAM 1 memory controller */ -#define IBM_CPM_DMA 0x01000000 /* DMA controller */ -#define IBM_CPM_DMA1 0x00800000 /* reserved */ -#define IBM_CPM_XPT1 0x00400000 /* reserved */ -#define IBM_CPM_XPT2 0x00200000 /* reserved */ -#define IBM_CPM_UART1 0x00100000 /* Serial 1 / Infrared */ -#define IBM_CPM_UART0 0x00080000 /* Serial 0 / 16550 */ -#define IBM_CPM_EPI 0x00040000 /* DCR Extension */ -#define IBM_CPM_SC0 0x00020000 /* Smart Card 0 */ -#define IBM_CPM_VID 0x00010000 /* reserved */ -#define IBM_CPM_SC1 0x00008000 /* Smart Card 1 */ -#define IBM_CPM_USBSDRA 0x00004000 /* SDRAM 0 memory controller */ -#define IBM_CPM_XPT0 0x00002000 /* Transport - 54 Mhz */ -#define IBM_CPM_CBS 0x00001000 /* Cross Bar Switch */ -#define IBM_CPM_GPT 0x00000800 /* GPTPWM */ -#define IBM_CPM_GPIO0 0x00000400 /* General Purpose IO 0 */ -#define IBM_CPM_DENC 0x00000200 /* Digital video Encoder */ -#define IBM_CPM_TMRCLK 0x00000100 /* CPU timers */ -#define IBM_CPM_XPT27 0x00000080 /* Transport - 27 Mhz */ -#define IBM_CPM_UIC 0x00000040 /* Universal Interrupt Controller */ -#define IBM_CPM_SSP 0x00000010 /* Modem Serial Interface (SSP) */ -#define IBM_CPM_UART2 0x00000008 /* Serial Control Port */ -#define IBM_CPM_DDIO 0x00000004 /* Descrambler */ -#define IBM_CPM_VID2 0x00000002 /* Video Decoder clock domain 2 */ - -#define DFLT_IBM4xx_PM ~(IBM_CPM_CPU | IBM_CPM_EBIU | IBM_CPM_SDRAM1 \ - | IBM_CPM_DMA | IBM_CPM_DMA1 | IBM_CPM_CBS \ - | IBM_CPM_USBSDRA | IBM_CPM_XPT0 | IBM_CPM_TMRCLK \ - | IBM_CPM_XPT27 | IBM_CPM_UIC ) - -#define DCRN_BEAR (DCRN_BE_BASE + 0x0) /* Bus Error Address Register */ -#define DCRN_BESR (DCRN_BE_BASE + 0x1) /* Bus Error Syndrome Register */ -/* DCRN_BESR */ -#define BESR_DSES 0x80000000 /* Data-Side Error Status */ -#define BESR_DMES 0x40000000 /* DMA Error Status */ -#define BESR_RWS 0x20000000 /* Read/Write Status */ -#define BESR_ETMASK 0x1C000000 /* Error Type */ -#define ET_PROT 0 -#define ET_PARITY 1 -#define ET_NCFG 2 -#define ET_BUSERR 4 -#define ET_BUSTO 6 - -#define CHR1_CETE 0x00800000 /* CPU external timer enable */ -#define CHR1_PCIPW 0x00008000 /* PCI Int enable/Peripheral Write enable */ - -#define DCRN_CICCR (DCRN_CIC_BASE + 0x0) /* CIC Control Register */ -#define DCRN_DMAS1 (DCRN_CIC_BASE + 0x1) /* DMA Select1 Register */ -#define DCRN_DMAS2 (DCRN_CIC_BASE + 0x2) /* DMA Select2 Register */ -#define DCRN_CICVCR (DCRN_CIC_BASE + 0x3) /* CIC Video COntro Register */ -#define DCRN_CICSEL3 (DCRN_CIC_BASE + 0x5) /* CIC Select 3 Register */ -#define DCRN_SGPO (DCRN_CIC_BASE + 0x6) /* CIC GPIO Output Register */ -#define DCRN_SGPOD (DCRN_CIC_BASE + 0x7) /* CIC GPIO OD Register */ -#define DCRN_SGPTC (DCRN_CIC_BASE + 0x8) /* CIC GPIO Tristate Ctrl Reg */ -#define DCRN_SGPI (DCRN_CIC_BASE + 0x9) /* CIC GPIO Input Reg */ - -#define DCRN_DCRXICR (DCRN_DCRX_BASE + 0x0) /* Internal Control Register */ -#define DCRN_DCRXISR (DCRN_DCRX_BASE + 0x1) /* Internal Status Register */ -#define DCRN_DCRXECR (DCRN_DCRX_BASE + 0x2) /* External Control Register */ -#define DCRN_DCRXESR (DCRN_DCRX_BASE + 0x3) /* External Status Register */ -#define DCRN_DCRXTAR (DCRN_DCRX_BASE + 0x4) /* Target Address Register */ -#define DCRN_DCRXTDR (DCRN_DCRX_BASE + 0x5) /* Target Data Register */ -#define DCRN_DCRXIGR (DCRN_DCRX_BASE + 0x6) /* Interrupt Generation Register */ -#define DCRN_DCRXBCR (DCRN_DCRX_BASE + 0x7) /* Line Buffer Control Register */ - -#define DCRN_BRCRH0 (DCRN_EBIMC_BASE + 0x0) /* Bus Region Config High 0 */ -#define DCRN_BRCRH1 (DCRN_EBIMC_BASE + 0x1) /* Bus Region Config High 1 */ -#define DCRN_BRCRH2 (DCRN_EBIMC_BASE + 0x2) /* Bus Region Config High 2 */ -#define DCRN_BRCRH3 (DCRN_EBIMC_BASE + 0x3) /* Bus Region Config High 3 */ -#define DCRN_BRCRH4 (DCRN_EBIMC_BASE + 0x4) /* Bus Region Config High 4 */ -#define DCRN_BRCRH5 (DCRN_EBIMC_BASE + 0x5) /* Bus Region Config High 5 */ -#define DCRN_BRCRH6 (DCRN_EBIMC_BASE + 0x6) /* Bus Region Config High 6 */ -#define DCRN_BRCRH7 (DCRN_EBIMC_BASE + 0x7) /* Bus Region Config High 7 */ -#define DCRN_BRCR0 (DCRN_EBIMC_BASE + 0x10) /* BRC 0 */ -#define DCRN_BRCR1 (DCRN_EBIMC_BASE + 0x11) /* BRC 1 */ -#define DCRN_BRCR2 (DCRN_EBIMC_BASE + 0x12) /* BRC 2 */ -#define DCRN_BRCR3 (DCRN_EBIMC_BASE + 0x13) /* BRC 3 */ -#define DCRN_BRCR4 (DCRN_EBIMC_BASE + 0x14) /* BRC 4 */ -#define DCRN_BRCR5 (DCRN_EBIMC_BASE + 0x15) /* BRC 5 */ -#define DCRN_BRCR6 (DCRN_EBIMC_BASE + 0x16) /* BRC 6 */ -#define DCRN_BRCR7 (DCRN_EBIMC_BASE + 0x17) /* BRC 7 */ -#define DCRN_BEAR0 (DCRN_EBIMC_BASE + 0x20) /* Bus Error Address Register */ -#define DCRN_BESR0 (DCRN_EBIMC_BASE + 0x21) /* Bus Error Status Register */ -#define DCRN_BIUCR (DCRN_EBIMC_BASE + 0x2A) /* Bus Interfac Unit Ctrl Reg */ - -#include <asm/ibm405.h> - -#endif /* __ASM_IBMSTB4_H__ */ -#endif /* __KERNEL__ */ |