diff options
64 files changed, 3538 insertions, 2604 deletions
diff --git a/Documentation/filesystems/devpts.txt b/Documentation/filesystems/devpts.txt new file mode 100644 index 000000000000..68dffd87f9b7 --- /dev/null +++ b/Documentation/filesystems/devpts.txt @@ -0,0 +1,132 @@ + +To support containers, we now allow multiple instances of devpts filesystem, +such that indices of ptys allocated in one instance are independent of indices +allocated in other instances of devpts. + +To preserve backward compatibility, this support for multiple instances is +enabled only if: + + - CONFIG_DEVPTS_MULTIPLE_INSTANCES=y, and + - '-o newinstance' mount option is specified while mounting devpts + +IOW, devpts now supports both single-instance and multi-instance semantics. + +If CONFIG_DEVPTS_MULTIPLE_INSTANCES=n, there is no change in behavior and +this referred to as the "legacy" mode. In this mode, the new mount options +(-o newinstance and -o ptmxmode) will be ignored with a 'bogus option' message +on console. + +If CONFIG_DEVPTS_MULTIPLE_INSTANCES=y and devpts is mounted without the +'newinstance' option (as in current start-up scripts) the new mount binds +to the initial kernel mount of devpts. This mode is referred to as the +'single-instance' mode and the current, single-instance semantics are +preserved, i.e PTYs are common across the system. + +The only difference between this single-instance mode and the legacy mode +is the presence of new, '/dev/pts/ptmx' node with permissions 0000, which +can safely be ignored. + +If CONFIG_DEVPTS_MULTIPLE_INSTANCES=y and 'newinstance' option is specified, +the mount is considered to be in the multi-instance mode and a new instance +of the devpts fs is created. Any ptys created in this instance are independent +of ptys in other instances of devpts. Like in the single-instance mode, the +/dev/pts/ptmx node is present. To effectively use the multi-instance mode, +open of /dev/ptmx must be a redirected to '/dev/pts/ptmx' using a symlink or +bind-mount. + +Eg: A container startup script could do the following: + + $ chmod 0666 /dev/pts/ptmx + $ rm /dev/ptmx + $ ln -s pts/ptmx /dev/ptmx + $ ns_exec -cm /bin/bash + + # We are now in new container + + $ umount /dev/pts + $ mount -t devpts -o newinstance lxcpts /dev/pts + $ sshd -p 1234 + +where 'ns_exec -cm /bin/bash' calls clone() with CLONE_NEWNS flag and execs +/bin/bash in the child process. A pty created by the sshd is not visible in +the original mount of /dev/pts. + +User-space changes +------------------ + +In multi-instance mode (i.e '-o newinstance' mount option is specified at least +once), following user-space issues should be noted. + +1. If -o newinstance mount option is never used, /dev/pts/ptmx can be ignored + and no change is needed to system-startup scripts. + +2. To effectively use multi-instance mode (i.e -o newinstance is specified) + administrators or startup scripts should "redirect" open of /dev/ptmx to + /dev/pts/ptmx using either a bind mount or symlink. + + $ mount -t devpts -o newinstance devpts /dev/pts + + followed by either + + $ rm /dev/ptmx + $ ln -s pts/ptmx /dev/ptmx + $ chmod 666 /dev/pts/ptmx + or + $ mount -o bind /dev/pts/ptmx /dev/ptmx + +3. The '/dev/ptmx -> pts/ptmx' symlink is the preferred method since it + enables better error-reporting and treats both single-instance and + multi-instance mounts similarly. + + But this method requires that system-startup scripts set the mode of + /dev/pts/ptmx correctly (default mode is 0000). The scripts can set the + mode by, either + + - adding ptmxmode mount option to devpts entry in /etc/fstab, or + - using 'chmod 0666 /dev/pts/ptmx' + +4. If multi-instance mode mount is needed for containers, but the system + startup scripts have not yet been updated, container-startup scripts + should bind mount /dev/ptmx to /dev/pts/ptmx to avoid breaking single- + instance mounts. + + Or, in general, container-startup scripts should use: + + mount -t devpts -o newinstance -o ptmxmode=0666 devpts /dev/pts + if [ ! -L /dev/ptmx ]; then + mount -o bind /dev/pts/ptmx /dev/ptmx + fi + + When all devpts mounts are multi-instance, /dev/ptmx can permanently be + a symlink to pts/ptmx and the bind mount can be ignored. + +5. A multi-instance mount that is not accompanied by the /dev/ptmx to + /dev/pts/ptmx redirection would result in an unusable/unreachable pty. + + mount -t devpts -o newinstance lxcpts /dev/pts + + immediately followed by: + + open("/dev/ptmx") + + would create a pty, say /dev/pts/7, in the initial kernel mount. + But /dev/pts/7 would be invisible in the new mount. + +6. The permissions for /dev/pts/ptmx node should be specified when mounting + /dev/pts, using the '-o ptmxmode=%o' mount option (default is 0000). + + mount -t devpts -o newinstance -o ptmxmode=0644 devpts /dev/pts + + The permissions can be later be changed as usual with 'chmod'. + + chmod 666 /dev/pts/ptmx + +7. A mount of devpts without the 'newinstance' option results in binding to + initial kernel mount. This behavior while preserving legacy semantics, + does not provide strict isolation in a container environment. i.e by + mounting devpts without the 'newinstance' option, a container could + get visibility into the 'host' or root container's devpts. + + To workaround this and have strict isolation, all mounts of devpts, + including the mount in the root container, should use the newinstance + option. diff --git a/MAINTAINERS b/MAINTAINERS index ceb32ee51f9d..d5fc534a1085 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2049,6 +2049,12 @@ M: mikulas@artax.karlin.mff.cuni.cz W: http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi S: Maintained +HSO 3G Modem Driver (hso.c) +P: Denis Joseph Barrow +M: d.barow@option.com +W: http://www.pharscape.org +S: Maintained + HTCPEN TOUCHSCREEN DRIVER P: Pau Oliva Fora M: pof@eslack.org diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index c602b547cc6e..1697043119bd 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -190,7 +190,7 @@ config DIGIEPCA config ESPSERIAL tristate "Hayes ESP serial port support" - depends on SERIAL_NONSTANDARD && ISA && ISA_DMA_API + depends on SERIAL_NONSTANDARD && ISA && ISA_DMA_API && BROKEN help This is a driver which supports Hayes ESP serial ports. Both single port cards and multiport cards are supported. Make sure to read @@ -443,6 +443,17 @@ config UNIX98_PTYS All modern Linux systems use the Unix98 ptys. Say Y unless you're on an embedded system and want to conserve memory. +config DEVPTS_MULTIPLE_INSTANCES + bool "Support multiple instances of devpts" + depends on UNIX98_PTYS + default n + ---help--- + Enable support for multiple instances of devpts filesystem. + If you want to have isolated PTY namespaces (eg: in containers), + say Y here. Otherwise, say N. If enabled, each mount of devpts + filesystem with the '-o newinstance' option will create an + independent PTY namespace. + config LEGACY_PTYS bool "Legacy (BSD) PTY support" default y diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c index b97aebd7aeb8..4e0cfdeab146 100644 --- a/drivers/char/amiserial.c +++ b/drivers/char/amiserial.c @@ -170,7 +170,7 @@ static __inline__ void rtsdtr_ctrl(int bits) */ static void rs_stop(struct tty_struct *tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_stop")) @@ -190,7 +190,7 @@ static void rs_stop(struct tty_struct *tty) static void rs_start(struct tty_struct *tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_start")) @@ -861,7 +861,7 @@ static int rs_put_char(struct tty_struct *tty, unsigned char ch) static void rs_flush_chars(struct tty_struct *tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_flush_chars")) @@ -934,7 +934,7 @@ static int rs_write(struct tty_struct * tty, const unsigned char *buf, int count static int rs_write_room(struct tty_struct *tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; if (serial_paranoia_check(info, tty->name, "rs_write_room")) return 0; @@ -943,7 +943,7 @@ static int rs_write_room(struct tty_struct *tty) static int rs_chars_in_buffer(struct tty_struct *tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) return 0; @@ -952,7 +952,7 @@ static int rs_chars_in_buffer(struct tty_struct *tty) static void rs_flush_buffer(struct tty_struct *tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) @@ -969,7 +969,7 @@ static void rs_flush_buffer(struct tty_struct *tty) */ static void rs_send_xchar(struct tty_struct *tty, char ch) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_send_char")) @@ -1004,7 +1004,7 @@ static void rs_send_xchar(struct tty_struct *tty, char ch) */ static void rs_throttle(struct tty_struct * tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; #ifdef SERIAL_DEBUG_THROTTLE char buf[64]; @@ -1029,7 +1029,7 @@ static void rs_throttle(struct tty_struct * tty) static void rs_unthrottle(struct tty_struct * tty) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; #ifdef SERIAL_DEBUG_THROTTLE char buf[64]; @@ -1194,7 +1194,7 @@ static int get_lsr_info(struct async_struct * info, unsigned int __user *value) static int rs_tiocmget(struct tty_struct *tty, struct file *file) { - struct async_struct * info = (struct async_struct *)tty->driver_data; + struct async_struct * info = tty->driver_data; unsigned char control, status; unsigned long flags; @@ -1217,7 +1217,7 @@ static int rs_tiocmget(struct tty_struct *tty, struct file *file) static int rs_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct async_struct * info = (struct async_struct *)tty->driver_data; + struct async_struct * info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_ioctl")) @@ -1244,7 +1244,7 @@ static int rs_tiocmset(struct tty_struct *tty, struct file *file, */ static int rs_break(struct tty_struct *tty, int break_state) { - struct async_struct * info = (struct async_struct *)tty->driver_data; + struct async_struct * info = tty->driver_data; unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_break")) @@ -1264,7 +1264,7 @@ static int rs_break(struct tty_struct *tty, int break_state) static int rs_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) { - struct async_struct * info = (struct async_struct *)tty->driver_data; + struct async_struct * info = tty->driver_data; struct async_icount cprev, cnow; /* kernel counter temps */ struct serial_icounter_struct icount; void __user *argp = (void __user *)arg; @@ -1368,7 +1368,7 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file, static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct async_struct *info = (struct async_struct *)tty->driver_data; + struct async_struct *info = tty->driver_data; unsigned long flags; unsigned int cflag = tty->termios->c_cflag; @@ -1428,7 +1428,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) */ static void rs_close(struct tty_struct *tty, struct file * filp) { - struct async_struct * info = (struct async_struct *)tty->driver_data; + struct async_struct * info = tty->driver_data; struct serial_state *state; unsigned long flags; @@ -1523,7 +1523,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp) */ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) { - struct async_struct * info = (struct async_struct *)tty->driver_data; + struct async_struct * info = tty->driver_data; unsigned long orig_jiffies, char_time; int lsr; @@ -1587,7 +1587,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) */ static void rs_hangup(struct tty_struct *tty) { - struct async_struct * info = (struct async_struct *)tty->driver_data; + struct async_struct * info = tty->driver_data; struct serial_state *state = info->state; if (serial_paranoia_check(info, tty->name, "rs_hangup")) diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 5e5b1dc1a0a7..6a59f72a9c21 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -5010,7 +5010,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, if (nchan == 0) { dev_err(&pdev->dev, "Cyclom-Y PCI host card with no " "Serial-Modules\n"); - return -EIO; + goto err_unmap; } } else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi) { struct RUNTIME_9060 __iomem *ctl_addr; diff --git a/drivers/char/epca.c b/drivers/char/epca.c index cf2461d34e5f..39ad820b2350 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -69,7 +69,9 @@ static int invalid_lilo_config; /* * The ISA boards do window flipping into the same spaces so its only sane with - * a single lock. It's still pretty efficient. + * a single lock. It's still pretty efficient. This lock guards the hardware + * and the tty_port lock guards the kernel side stuff like use counts. Take + * this lock inside the port lock if you must take both. */ static DEFINE_SPINLOCK(epca_lock); @@ -156,14 +158,12 @@ static struct channel *verifyChannel(struct tty_struct *); static void pc_sched_event(struct channel *, int); static void epca_error(int, char *); static void pc_close(struct tty_struct *, struct file *); -static void shutdown(struct channel *); +static void shutdown(struct channel *, struct tty_struct *tty); static void pc_hangup(struct tty_struct *); static int pc_write_room(struct tty_struct *); static int pc_chars_in_buffer(struct tty_struct *); static void pc_flush_buffer(struct tty_struct *); static void pc_flush_chars(struct tty_struct *); -static int block_til_ready(struct tty_struct *, struct file *, - struct channel *); static int pc_open(struct tty_struct *, struct file *); static void post_fep_init(unsigned int crd); static void epcapoll(unsigned long); @@ -173,7 +173,7 @@ static unsigned termios2digi_h(struct channel *ch, unsigned); static unsigned termios2digi_i(struct channel *ch, unsigned); static unsigned termios2digi_c(struct channel *ch, unsigned); static void epcaparam(struct tty_struct *, struct channel *); -static void receive_data(struct channel *); +static void receive_data(struct channel *, struct tty_struct *tty); static int pc_ioctl(struct tty_struct *, struct file *, unsigned int, unsigned long); static int info_ioctl(struct tty_struct *, struct file *, @@ -392,7 +392,7 @@ static struct channel *verifyChannel(struct tty_struct *tty) * through tty->driver_data this should catch it. */ if (tty) { - struct channel *ch = (struct channel *)tty->driver_data; + struct channel *ch = tty->driver_data; if (ch >= &digi_channels[0] && ch < &digi_channels[nbdevs]) { if (ch->magic == EPCA_MAGIC) return ch; @@ -419,76 +419,34 @@ static void epca_error(int line, char *msg) static void pc_close(struct tty_struct *tty, struct file *filp) { struct channel *ch; - unsigned long flags; + struct tty_port *port; /* * verifyChannel returns the channel from the tty struct if it is * valid. This serves as a sanity check. */ ch = verifyChannel(tty); - if (ch != NULL) { - spin_lock_irqsave(&epca_lock, flags); - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&epca_lock, flags); - return; - } - if (ch->port.count-- > 1) { - /* Begin channel is open more than once */ - /* - * Return without doing anything. Someone might still - * be using the channel. - */ - spin_unlock_irqrestore(&epca_lock, flags); - return; - } - /* Port open only once go ahead with shutdown & reset */ - BUG_ON(ch->port.count < 0); - - /* - * Let the rest of the driver know the channel is being closed. - * This becomes important if an open is attempted before close - * is finished. - */ - ch->port.flags |= ASYNC_CLOSING; - tty->closing = 1; - - spin_unlock_irqrestore(&epca_lock, flags); - - if (ch->port.flags & ASYNC_INITIALIZED) { - /* Setup an event to indicate when the - transmit buffer empties */ - setup_empty_event(tty, ch); - /* 30 seconds timeout */ - tty_wait_until_sent(tty, 3000); - } - pc_flush_buffer(tty); + if (ch == NULL) + return; + port = &ch->port; - tty_ldisc_flush(tty); - shutdown(ch); + if (tty_port_close_start(port, tty, filp) == 0) + return; - spin_lock_irqsave(&epca_lock, flags); - tty->closing = 0; - ch->event = 0; - ch->port.tty = NULL; - spin_unlock_irqrestore(&epca_lock, flags); + pc_flush_buffer(tty); + shutdown(ch, tty); - if (ch->port.blocked_open) { - if (ch->close_delay) - msleep_interruptible(jiffies_to_msecs(ch->close_delay)); - wake_up_interruptible(&ch->port.open_wait); - } - ch->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_INITIALIZED | - ASYNC_CLOSING); - wake_up_interruptible(&ch->port.close_wait); - } + tty_port_close_end(port, tty); + ch->event = 0; /* FIXME: review ch->event locking */ + tty_port_tty_set(port, NULL); } -static void shutdown(struct channel *ch) +static void shutdown(struct channel *ch, struct tty_struct *tty) { unsigned long flags; - struct tty_struct *tty; struct board_chan __iomem *bc; + struct tty_port *port = &ch->port; - if (!(ch->port.flags & ASYNC_INITIALIZED)) + if (!(port->flags & ASYNC_INITIALIZED)) return; spin_lock_irqsave(&epca_lock, flags); @@ -503,7 +461,6 @@ static void shutdown(struct channel *ch) */ if (bc) writeb(0, &bc->idata); - tty = ch->port.tty; /* If we're a modem control device and HUPCL is on, drop RTS & DTR. */ if (tty->termios->c_cflag & HUPCL) { @@ -517,32 +474,26 @@ static void shutdown(struct channel *ch) * will have to reinitialized. Set a flag to indicate this. */ /* Prevent future Digi programmed interrupts from coming active */ - ch->port.flags &= ~ASYNC_INITIALIZED; + port->flags &= ~ASYNC_INITIALIZED; spin_unlock_irqrestore(&epca_lock, flags); } static void pc_hangup(struct tty_struct *tty) { struct channel *ch; + /* * verifyChannel returns the channel from the tty struct if it is * valid. This serves as a sanity check. */ ch = verifyChannel(tty); if (ch != NULL) { - unsigned long flags; - pc_flush_buffer(tty); tty_ldisc_flush(tty); - shutdown(ch); + shutdown(ch, tty); - spin_lock_irqsave(&epca_lock, flags); - ch->port.tty = NULL; - ch->event = 0; - ch->port.count = 0; - ch->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_INITIALIZED); - spin_unlock_irqrestore(&epca_lock, flags); - wake_up_interruptible(&ch->port.open_wait); + ch->event = 0; /* FIXME: review locking of ch->event */ + tty_port_hangup(&ch->port); } } @@ -786,100 +737,22 @@ static void pc_flush_chars(struct tty_struct *tty) } } -static int block_til_ready(struct tty_struct *tty, - struct file *filp, struct channel *ch) +static int epca_carrier_raised(struct tty_port *port) { - DECLARE_WAITQUEUE(wait, current); - int retval, do_clocal = 0; - unsigned long flags; - - if (tty_hung_up_p(filp)) { - if (ch->port.flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - return retval; - } - - /* - * If the device is in the middle of being closed, then block until - * it's done, and then try again. - */ - if (ch->port.flags & ASYNC_CLOSING) { - interruptible_sleep_on(&ch->port.close_wait); - - if (ch->port.flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; - } - - if (filp->f_flags & O_NONBLOCK) { - /* - * If non-blocking mode is set, then make the check up front - * and then exit. - */ - ch->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; - /* Block waiting for the carrier detect and the line to become free */ - - retval = 0; - add_wait_queue(&ch->port.open_wait, &wait); - - spin_lock_irqsave(&epca_lock, flags); - /* We dec count so that pc_close will know when to free things */ - if (!tty_hung_up_p(filp)) - ch->port.count--; - ch->port.blocked_open++; - while (1) { - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(ch->port.flags & ASYNC_INITIALIZED)) { - if (ch->port.flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(ch->port.flags & ASYNC_CLOSING) && - (do_clocal || (ch->imodem & ch->dcd))) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - spin_unlock_irqrestore(&epca_lock, flags); - /* - * Allow someone else to be scheduled. We will occasionally go - * through this loop until one of the above conditions change. - * The below schedule call will allow other processes to enter - * and prevent this loop from hogging the cpu. - */ - schedule(); - spin_lock_irqsave(&epca_lock, flags); - } - - __set_current_state(TASK_RUNNING); - remove_wait_queue(&ch->port.open_wait, &wait); - if (!tty_hung_up_p(filp)) - ch->port.count++; - ch->port.blocked_open--; - - spin_unlock_irqrestore(&epca_lock, flags); - - if (retval) - return retval; - - ch->port.flags |= ASYNC_NORMAL_ACTIVE; + struct channel *ch = container_of(port, struct channel, port); + if (ch->imodem & ch->dcd) + return 1; return 0; } +static void epca_raise_dtr_rts(struct tty_port *port) +{ +} + static int pc_open(struct tty_struct *tty, struct file *filp) { struct channel *ch; + struct tty_port *port; unsigned long flags; int line, retval, boardnum; struct board_chan __iomem *bc; @@ -890,6 +763,7 @@ static int pc_open(struct tty_struct *tty, struct file *filp) return -ENODEV; ch = &digi_channels[line]; + port = &ch->port; boardnum = ch->boardnum; /* Check status of board configured in system. */ @@ -926,22 +800,24 @@ static int pc_open(struct tty_struct *tty, struct file *filp) return -ENODEV; } - spin_lock_irqsave(&epca_lock, flags); + spin_lock_irqsave(&port->lock, flags); /* * Every time a channel is opened, increment a counter. This is * necessary because we do not wish to flush and shutdown the channel * until the last app holding the channel open, closes it. */ - ch->port.count++; + port->count++; /* * Set a kernel structures pointer to our local channel structure. This * way we can get to it when passed only a tty struct. */ tty->driver_data = ch; + port->tty = tty; /* * If this is the first time the channel has been opened, initialize * the tty->termios struct otherwise let pc_close handle it. */ + spin_lock(&epca_lock); globalwinon(ch); ch->statusflags = 0; @@ -956,31 +832,33 @@ static int pc_open(struct tty_struct *tty, struct file *filp) writew(head, &bc->rout); /* Set the channels associated tty structure */ - ch->port.tty = tty; /* * The below routine generally sets up parity, baud, flow control * issues, etc.... It effect both control flags and input flags. */ epcaparam(tty, ch); - ch->port.flags |= ASYNC_INITIALIZED; memoff(ch); - spin_unlock_irqrestore(&epca_lock, flags); + spin_unlock(&epca_lock); + port->flags |= ASYNC_INITIALIZED; + spin_unlock_irqrestore(&port->lock, flags); - retval = block_til_ready(tty, filp, ch); + retval = tty_port_block_til_ready(port, tty, filp); if (retval) return retval; /* * Set this again in case a hangup set it to zero while this open() was * waiting for the line... */ - spin_lock_irqsave(&epca_lock, flags); - ch->port.tty = tty; + spin_lock_irqsave(&port->lock, flags); + port->tty = tty; + spin_lock(&epca_lock); globalwinon(ch); /* Enable Digi Data events */ writeb(1, &bc->idata); memoff(ch); - spin_unlock_irqrestore(&epca_lock, flags); + spin_unlock(&epca_lock); + spin_unlock_irqrestore(&port->lock, flags); return 0; } @@ -1016,8 +894,11 @@ static void __exit epca_module_exit(void) } ch = card_ptr[crd]; for (count = 0; count < bd->numports; count++, ch++) { - if (ch && ch->port.tty) - tty_hangup(ch->port.tty); + struct tty_struct *tty = tty_port_tty_get(&ch->port); + if (tty) { + tty_hangup(tty); + tty_kref_put(tty); + } } } pci_unregister_driver(&epca_driver); @@ -1042,6 +923,11 @@ static const struct tty_operations pc_ops = { .break_ctl = pc_send_break }; +static const struct tty_port_operations epca_port_ops = { + .carrier_raised = epca_carrier_raised, + .raise_dtr_rts = epca_raise_dtr_rts, +}; + static int info_open(struct tty_struct *tty, struct file *filp) { return 0; @@ -1377,6 +1263,7 @@ static void post_fep_init(unsigned int crd) u16 tseg, rseg; tty_port_init(&ch->port); + ch->port.ops = &epca_port_ops; ch->brdchan = bc; ch->mailbox = gd; INIT_WORK(&ch->tqueue, do_softint); @@ -1428,7 +1315,7 @@ static void post_fep_init(unsigned int crd) ch->boardnum = crd; ch->channelnum = i; ch->magic = EPCA_MAGIC; - ch->port.tty = NULL; + tty_port_tty_set(&ch->port, NULL); if (shrinkmem) { fepcmd(ch, SETBUFFER, 32, 0, 0, 0); @@ -1510,7 +1397,7 @@ static void post_fep_init(unsigned int crd) ch->fepstartca = 0; ch->fepstopca = 0; - ch->close_delay = 50; + ch->port.close_delay = 50; spin_unlock_irqrestore(&epca_lock, flags); } @@ -1622,15 +1509,16 @@ static void doevent(int crd) if (bc == NULL) goto next; + tty = tty_port_tty_get(&ch->port); if (event & DATA_IND) { /* Begin DATA_IND */ - receive_data(ch); + receive_data(ch, tty); assertgwinon(ch); } /* End DATA_IND */ /* else *//* Fix for DCD transition missed bug */ if (event & MODEMCHG_IND) { /* A modem signal change has been indicated */ ch->imodem = mstat; - if (ch->port.flags & ASYNC_CHECK_CD) { + if (test_bit(ASYNC_CHECK_CD, &ch->port.flags)) { /* We are now receiving dcd */ if (mstat & ch->dcd) wake_up_interruptible(&ch->port.open_wait); @@ -1638,7 +1526,6 @@ static void doevent(int crd) pc_sched_event(ch, EPCA_EVENT_HANGUP); } } - tty = ch->port.tty; if (tty) { if (event & BREAK_IND) { /* A break has been indicated */ @@ -1658,6 +1545,7 @@ static void doevent(int crd) tty_wakeup(tty); } } + tty_kref_put(tty); } next: globalwinon(ch); @@ -1877,9 +1765,9 @@ static void epcaparam(struct tty_struct *tty, struct channel *ch) * that the driver will wait on carrier detect. */ if (ts->c_cflag & CLOCAL) - ch->port.flags &= ~ASYNC_CHECK_CD; + clear_bit(ASYNC_CHECK_CD, &ch->port.flags); else - ch->port.flags |= ASYNC_CHECK_CD; + set_bit(ASYNC_CHECK_CD, &ch->port.flags); mval = ch->m_dtr | ch->m_rts; } /* End CBAUD not detected */ iflag = termios2digi_i(ch, ts->c_iflag); @@ -1952,11 +1840,10 @@ static void epcaparam(struct tty_struct *tty, struct channel *ch) } /* Caller holds lock */ -static void receive_data(struct channel *ch) +static void receive_data(struct channel *ch, struct tty_struct *tty) { unchar *rptr; struct ktermios *ts = NULL; - struct tty_struct *tty; struct board_chan __iomem *bc; int dataToRead, wrapgap, bytesAvailable; unsigned int tail, head; @@ -1969,7 +1856,6 @@ static void receive_data(struct channel *ch) globalwinon(ch); if (ch->statusflags & RXSTOPPED) return; - tty = ch->port.tty; if (tty) ts = tty->termios; bc = ch->brdchan; @@ -2029,7 +1915,7 @@ static void receive_data(struct channel *ch) globalwinon(ch); writew(tail, &bc->rout); /* Must be called with global data */ - tty_schedule_flip(ch->port.tty); + tty_schedule_flip(tty); } static int info_ioctl(struct tty_struct *tty, struct file *file, @@ -2097,7 +1983,7 @@ static int info_ioctl(struct tty_struct *tty, struct file *file, static int pc_tiocmget(struct tty_struct *tty, struct file *file) { - struct channel *ch = (struct channel *) tty->driver_data; + struct channel *ch = tty->driver_data; struct board_chan __iomem *bc; unsigned int mstat, mflag = 0; unsigned long flags; @@ -2131,7 +2017,7 @@ static int pc_tiocmget(struct tty_struct *tty, struct file *file) static int pc_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct channel *ch = (struct channel *) tty->driver_data; + struct channel *ch = tty->driver_data; unsigned long flags; if (!ch) @@ -2178,7 +2064,7 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file, unsigned int mflag, mstat; unsigned char startc, stopc; struct board_chan __iomem *bc; - struct channel *ch = (struct channel *) tty->driver_data; + struct channel *ch = tty->driver_data; void __user *argp = (void __user *)arg; if (ch) @@ -2352,15 +2238,16 @@ static void do_softint(struct work_struct *work) struct channel *ch = container_of(work, struct channel, tqueue); /* Called in response to a modem change event */ if (ch && ch->magic == EPCA_MAGIC) { - struct tty_struct *tty = ch->port.tty; + struct tty_struct *tty = tty_port_tty_get(&ch->port);; if (tty && tty->driver_data) { if (test_and_clear_bit(EPCA_EVENT_HANGUP, &ch->event)) { tty_hangup(tty); wake_up_interruptible(&ch->port.open_wait); - ch->port.flags &= ~ASYNC_NORMAL_ACTIVE; + clear_bit(ASYNC_NORMAL_ACTIVE, &ch->port.flags); } } + tty_kref_put(tty); } } @@ -2473,7 +2360,7 @@ static void pc_unthrottle(struct tty_struct *tty) static int pc_send_break(struct tty_struct *tty, int msec) { - struct channel *ch = (struct channel *) tty->driver_data; + struct channel *ch = tty->driver_data; unsigned long flags; if (msec == -1) diff --git a/drivers/char/esp.c b/drivers/char/esp.c index 7f077c0097f6..45ec263ec012 100644 --- a/drivers/char/esp.c +++ b/drivers/char/esp.c @@ -2054,6 +2054,15 @@ static void esp_hangup(struct tty_struct *tty) wake_up_interruptible(&info->port.open_wait); } +static int esp_carrier_raised(struct tty_port *port) +{ + struct esp_struct *info = container_of(port, struct esp_struct, port); + serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT); + if (serial_in(info, UART_ESI_STAT2) & UART_MSR_DCD) + return 1; + return 0; +} + /* * ------------------------------------------------------------ * esp_open() and friends @@ -2066,17 +2075,19 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, int retval; int do_clocal = 0; unsigned long flags; + int cd; + struct tty_port *port = &info->port; /* * If the device is in the middle of being closed, then block * until it's done, and then try again. */ if (tty_hung_up_p(filp) || - (info->port.flags & ASYNC_CLOSING)) { - if (info->port.flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->port.close_wait); + (port->flags & ASYNC_CLOSING)) { + if (port->flags & ASYNC_CLOSING) + interruptible_sleep_on(&port->close_wait); #ifdef SERIAL_DO_RESTART - if (info->port.flags & ASYNC_HUP_NOTIFY) + if (port->flags & ASYNC_HUP_NOTIFY) return -EAGAIN; else return -ERESTARTSYS; @@ -2091,7 +2102,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, */ if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -2101,20 +2112,20 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, /* * Block waiting for the carrier detect and the line to become * free (i.e., not in use by the callout). While we are in - * this loop, info->port.count is dropped by one, so that + * this loop, port->count is dropped by one, so that * rs_close() knows when to free things. We restore it upon * exit, either normal or abnormal. */ retval = 0; - add_wait_queue(&info->port.open_wait, &wait); + add_wait_queue(&port->open_wait, &wait); #ifdef SERIAL_DEBUG_OPEN printk(KERN_DEBUG "block_til_ready before block: ttys%d, count = %d\n", - info->line, info->port.count); + info->line, port->count); #endif spin_lock_irqsave(&info->lock, flags); if (!tty_hung_up_p(filp)) - info->port.count--; - info->port.blocked_open++; + port->count--; + port->blocked_open++; while (1) { if ((tty->termios->c_cflag & CBAUD)) { unsigned int scratch; @@ -2129,9 +2140,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, } set_current_state(TASK_INTERRUPTIBLE); if (tty_hung_up_p(filp) || - !(info->port.flags & ASYNC_INITIALIZED)) { + !(port->flags & ASYNC_INITIALIZED)) { #ifdef SERIAL_DO_RESTART - if (info->port.flags & ASYNC_HUP_NOTIFY) + if (port->flags & ASYNC_HUP_NOTIFY) retval = -EAGAIN; else retval = -ERESTARTSYS; @@ -2141,11 +2152,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, break; } - serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT); - if (serial_in(info, UART_ESI_STAT2) & UART_MSR_DCD) - do_clocal = 1; + cd = tty_port_carrier_raised(port); - if (!(info->port.flags & ASYNC_CLOSING) && + if (!(port->flags & ASYNC_CLOSING) && (do_clocal)) break; if (signal_pending(current)) { @@ -2154,25 +2163,25 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, } #ifdef SERIAL_DEBUG_OPEN printk(KERN_DEBUG "block_til_ready blocking: ttys%d, count = %d\n", - info->line, info->port.count); + info->line, port->count); #endif spin_unlock_irqrestore(&info->lock, flags); schedule(); spin_lock_irqsave(&info->lock, flags); } set_current_state(TASK_RUNNING); - remove_wait_queue(&info->port.open_wait, &wait); + remove_wait_queue(&port->open_wait, &wait); if (!tty_hung_up_p(filp)) - info->port.count++; - info->port.blocked_open--; + port->count++; + port->blocked_open--; spin_unlock_irqrestore(&info->lock, flags); #ifdef SERIAL_DEBUG_OPEN printk(KERN_DEBUG "block_til_ready after blocking: ttys%d, count = %d\n", - info->line, info->port.count); + info->line, port->count); #endif if (retval) return retval; - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -2329,6 +2338,10 @@ static const struct tty_operations esp_ops = { .tiocmset = esp_tiocmset, }; +static const struct tty_port_operations esp_port_ops = { + .esp_carrier_raised, +}; + /* * The serial driver boot-time initialization code! */ @@ -2415,6 +2428,8 @@ static int __init espserial_init(void) offset = 0; do { + tty_port_init(&info->port); + info->port.ops = &esp_port_ops; info->io_port = esp[i] + offset; info->irq = irq[i]; info->line = (i * 8) + (offset / 8); @@ -2437,8 +2452,6 @@ static int __init espserial_init(void) info->config.flow_off = flow_off; info->config.pio_threshold = pio_threshold; info->next_port = ports; - init_waitqueue_head(&info->port.open_wait); - init_waitqueue_head(&info->port.close_wait); init_waitqueue_head(&info->delta_msr_wait); init_waitqueue_head(&info->break_wait); ports = info; diff --git a/drivers/char/generic_serial.c b/drivers/char/generic_serial.c index c6090f84a2e4..9e4e569dc00d 100644 --- a/drivers/char/generic_serial.c +++ b/drivers/char/generic_serial.c @@ -376,7 +376,8 @@ static void gs_shutdown_port (struct gs_port *port) void gs_hangup(struct tty_struct *tty) { - struct gs_port *port; + struct gs_port *port; + unsigned long flags; func_enter (); @@ -386,9 +387,11 @@ void gs_hangup(struct tty_struct *tty) return; gs_shutdown_port (port); + spin_lock_irqsave(&port->port.lock, flags); port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|GS_ACTIVE); port->port.tty = NULL; port->port.count = 0; + spin_unlock_irqrestore(&port->port.lock, flags); wake_up_interruptible(&port->port.open_wait); func_exit (); @@ -397,7 +400,8 @@ void gs_hangup(struct tty_struct *tty) int gs_block_til_ready(void *port_, struct file * filp) { - struct gs_port *port = port_; + struct gs_port *gp = port_; + struct tty_port *port = &gp->port; DECLARE_WAITQUEUE(wait, current); int retval; int do_clocal = 0; @@ -409,16 +413,16 @@ int gs_block_til_ready(void *port_, struct file * filp) if (!port) return 0; - tty = port->port.tty; + tty = port->tty; gs_dprintk (GS_DEBUG_BTR, "Entering gs_block_till_ready.\n"); /* * If the device is in the middle of being closed, then block * until it's done, and then try again. */ - if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) { - interruptible_sleep_on(&port->port.close_wait); - if (port->port.flags & ASYNC_HUP_NOTIFY) + if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) { + interruptible_sleep_on(&port->close_wait); + if (port->flags & ASYNC_HUP_NOTIFY) return -EAGAIN; else return -ERESTARTSYS; @@ -432,7 +436,7 @@ int gs_block_til_ready(void *port_, struct file * filp) */ if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { - port->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -444,34 +448,34 @@ int gs_block_til_ready(void *port_, struct file * filp) /* * Block waiting for the carrier detect and the line to become * free (i.e., not in use by the callout). While we are in - * this loop, port->port.count is dropped by one, so that + * this loop, port->count is dropped by one, so that * rs_close() knows when to free things. We restore it upon * exit, either normal or abnormal. */ retval = 0; - add_wait_queue(&port->port.open_wait, &wait); + add_wait_queue(&port->open_wait, &wait); gs_dprintk (GS_DEBUG_BTR, "after add waitq.\n"); - spin_lock_irqsave(&port->driver_lock, flags); + spin_lock_irqsave(&port->lock, flags); if (!tty_hung_up_p(filp)) { - port->port.count--; + port->count--; } - spin_unlock_irqrestore(&port->driver_lock, flags); - port->port.blocked_open++; + port->blocked_open++; + spin_unlock_irqrestore(&port->lock, flags); while (1) { - CD = port->rd->get_CD (port); + CD = tty_port_carrier_raised(port); gs_dprintk (GS_DEBUG_BTR, "CD is now %d.\n", CD); set_current_state (TASK_INTERRUPTIBLE); if (tty_hung_up_p(filp) || - !(port->port.flags & ASYNC_INITIALIZED)) { - if (port->port.flags & ASYNC_HUP_NOTIFY) + !(port->flags & ASYNC_INITIALIZED)) { + if (port->flags & ASYNC_HUP_NOTIFY) retval = -EAGAIN; else retval = -ERESTARTSYS; break; } - if (!(port->port.flags & ASYNC_CLOSING) && + if (!(port->flags & ASYNC_CLOSING) && (do_clocal || CD)) break; gs_dprintk (GS_DEBUG_BTR, "signal_pending is now: %d (%lx)\n", @@ -483,19 +487,20 @@ int gs_block_til_ready(void *port_, struct file * filp) schedule(); } gs_dprintk (GS_DEBUG_BTR, "Got out of the loop. (%d)\n", - port->port.blocked_open); + port->blocked_open); set_current_state (TASK_RUNNING); - remove_wait_queue(&port->port.open_wait, &wait); + remove_wait_queue(&port->open_wait, &wait); + + spin_lock_irqsave(&port->lock, flags); if (!tty_hung_up_p(filp)) { - port->port.count++; + port->count++; } - port->port.blocked_open--; - if (retval) - return retval; - - port->port.flags |= ASYNC_NORMAL_ACTIVE; + port->blocked_open--; + if (retval == 0) + port->flags |= ASYNC_NORMAL_ACTIVE; + spin_unlock_irqrestore(&port->lock, flags); func_exit (); - return 0; + return retval; } @@ -506,7 +511,7 @@ void gs_close(struct tty_struct * tty, struct file * filp) func_enter (); - port = (struct gs_port *) tty->driver_data; + port = tty->driver_data; if (!port) return; @@ -516,10 +521,10 @@ void gs_close(struct tty_struct * tty, struct file * filp) port->port.tty = tty; } - spin_lock_irqsave(&port->driver_lock, flags); + spin_lock_irqsave(&port->port.lock, flags); if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&port->driver_lock, flags); + spin_unlock_irqrestore(&port->port.lock, flags); if (port->rd->hungup) port->rd->hungup (port); func_exit (); @@ -538,7 +543,7 @@ void gs_close(struct tty_struct * tty, struct file * filp) if (port->port.count) { gs_dprintk(GS_DEBUG_CLOSE, "gs_close port %p: count: %d\n", port, port->port.count); - spin_unlock_irqrestore(&port->driver_lock, flags); + spin_unlock_irqrestore(&port->port.lock, flags); func_exit (); return; } @@ -559,8 +564,10 @@ void gs_close(struct tty_struct * tty, struct file * filp) * line status register. */ + spin_lock_irqsave(&port->driver_lock, flags); port->rd->disable_rx_interrupts (port); spin_unlock_irqrestore(&port->driver_lock, flags); + spin_unlock_irqrestore(&port->port.lock, flags); /* close has no way of returning "EINTR", so discard return value */ if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) @@ -573,20 +580,25 @@ void gs_close(struct tty_struct * tty, struct file * filp) tty_ldisc_flush(tty); tty->closing = 0; + spin_lock_irqsave(&port->driver_lock, flags); port->event = 0; port->rd->close (port); port->rd->shutdown_port (port); + spin_unlock_irqrestore(&port->driver_lock, flags); + + spin_lock_irqsave(&port->port.lock, flags); port->port.tty = NULL; if (port->port.blocked_open) { if (port->close_delay) { - spin_unlock_irqrestore(&port->driver_lock, flags); + spin_unlock_irqrestore(&port->port.lock, flags); msleep_interruptible(jiffies_to_msecs(port->close_delay)); - spin_lock_irqsave(&port->driver_lock, flags); + spin_lock_irqsave(&port->port.lock, flags); } wake_up_interruptible(&port->port.open_wait); } port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING | ASYNC_INITIALIZED); + spin_unlock_irqrestore(&port->port.lock, flags); wake_up_interruptible(&port->port.close_wait); func_exit (); diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c index 0587b66d6fc7..5a8a4c28c867 100644 --- a/drivers/char/hvc_console.c +++ b/drivers/char/hvc_console.c @@ -529,7 +529,7 @@ static void hvc_set_winsz(struct work_struct *work) tty = tty_kref_get(hp->tty); spin_unlock_irqrestore(&hp->lock, hvc_flags); - tty_do_resize(tty, tty, &ws); + tty_do_resize(tty, &ws); tty_kref_put(tty); } diff --git a/drivers/char/hvsi.c b/drivers/char/hvsi.c index af055287271a..406f8742a260 100644 --- a/drivers/char/hvsi.c +++ b/drivers/char/hvsi.c @@ -997,14 +997,14 @@ out: static int hvsi_write_room(struct tty_struct *tty) { - struct hvsi_struct *hp = (struct hvsi_struct *)tty->driver_data; + struct hvsi_struct *hp = tty->driver_data; return N_OUTBUF - hp->n_outbuf; } static int hvsi_chars_in_buffer(struct tty_struct *tty) { - struct hvsi_struct *hp = (struct hvsi_struct *)tty->driver_data; + struct hvsi_struct *hp = tty->driver_data; return hp->n_outbuf; } @@ -1070,7 +1070,7 @@ out: */ static void hvsi_throttle(struct tty_struct *tty) { - struct hvsi_struct *hp = (struct hvsi_struct *)tty->driver_data; + struct hvsi_struct *hp = tty->driver_data; pr_debug("%s\n", __func__); @@ -1079,7 +1079,7 @@ static void hvsi_throttle(struct tty_struct *tty) static void hvsi_unthrottle(struct tty_struct *tty) { - struct hvsi_struct *hp = (struct hvsi_struct *)tty->driver_data; + struct hvsi_struct *hp = tty->driver_data; unsigned long flags; int shouldflip = 0; @@ -1100,7 +1100,7 @@ static void hvsi_unthrottle(struct tty_struct *tty) static int hvsi_tiocmget(struct tty_struct *tty, struct file *file) { - struct hvsi_struct *hp = (struct hvsi_struct *)tty->driver_data; + struct hvsi_struct *hp = tty->driver_data; hvsi_get_mctrl(hp); return hp->mctrl; @@ -1109,7 +1109,7 @@ static int hvsi_tiocmget(struct tty_struct *tty, struct file *file) static int hvsi_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct hvsi_struct *hp = (struct hvsi_struct *)tty->driver_data; + struct hvsi_struct *hp = tty->driver_data; unsigned long flags; uint16_t new_mctrl; diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 04e4549299ba..24aa6e88e223 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -328,11 +328,13 @@ static inline void drop_rts(struct isi_port *port) } /* card->lock MUST NOT be held */ -static inline void raise_dtr_rts(struct isi_port *port) + +static void isicom_raise_dtr_rts(struct tty_port *port) { - struct isi_board *card = port->card; + struct isi_port *ip = container_of(port, struct isi_port, port); + struct isi_board *card = ip->card; unsigned long base = card->base; - u16 channel = port->channel; + u16 channel = ip->channel; if (!lock_card(card)) return; @@ -340,7 +342,7 @@ static inline void raise_dtr_rts(struct isi_port *port) outw(0x8000 | (channel << card->shift_count) | 0x02, base); outw(0x0f04, base); InterruptTheCard(base); - port->status |= (ISI_DTR | ISI_RTS); + ip->status |= (ISI_DTR | ISI_RTS); unlock_card(card); } @@ -830,80 +832,10 @@ static int isicom_setup_port(struct tty_struct *tty) return 0; } -static int block_til_ready(struct tty_struct *tty, struct file *filp, - struct isi_port *port) +static int isicom_carrier_raised(struct tty_port *port) { - struct isi_board *card = port->card; - int do_clocal = 0, retval; - unsigned long flags; - DECLARE_WAITQUEUE(wait, current); - - /* block if port is in the process of being closed */ - - if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) { - pr_dbg("block_til_ready: close in progress.\n"); - interruptible_sleep_on(&port->port.close_wait); - if (port->port.flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; - } - - /* if non-blocking mode is set ... */ - - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - pr_dbg("block_til_ready: non-block mode.\n"); - port->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (C_CLOCAL(tty)) - do_clocal = 1; - - /* block waiting for DCD to be asserted, and while - callout dev is busy */ - retval = 0; - add_wait_queue(&port->port.open_wait, &wait); - - spin_lock_irqsave(&card->card_lock, flags); - if (!tty_hung_up_p(filp)) - port->port.count--; - port->port.blocked_open++; - spin_unlock_irqrestore(&card->card_lock, flags); - - while (1) { - raise_dtr_rts(port); - - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(port->port.flags & ASYNC_INITIALIZED)) { - if (port->port.flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(port->port.flags & ASYNC_CLOSING) && - (do_clocal || (port->status & ISI_DCD))) { - break; - } - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - schedule(); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->port.open_wait, &wait); - spin_lock_irqsave(&card->card_lock, flags); - if (!tty_hung_up_p(filp)) - port->port.count++; - port->port.blocked_open--; - spin_unlock_irqrestore(&card->card_lock, flags); - if (retval) - return retval; - port->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; + struct isi_port *ip = container_of(port, struct isi_port, port); + return (ip->status & ISI_DCD)?1 : 0; } static int isicom_open(struct tty_struct *tty, struct file *filp) @@ -932,12 +864,13 @@ static int isicom_open(struct tty_struct *tty, struct file *filp) isicom_setup_board(card); + /* FIXME: locking on port.count etc */ port->port.count++; tty->driver_data = port; tty_port_tty_set(&port->port, tty); error = isicom_setup_port(tty); if (error == 0) - error = block_til_ready(tty, filp, port); + error = tty_port_block_til_ready(&port->port, tty, filp); return error; } @@ -1012,76 +945,30 @@ static void isicom_flush_buffer(struct tty_struct *tty) static void isicom_close(struct tty_struct *tty, struct file *filp) { - struct isi_port *port = tty->driver_data; + struct isi_port *ip = tty->driver_data; + struct tty_port *port = &ip->port; struct isi_board *card; unsigned long flags; - if (!port) - return; - card = port->card; - if (isicom_paranoia_check(port, tty->name, "isicom_close")) - return; - - pr_dbg("Close start!!!.\n"); - - spin_lock_irqsave(&card->card_lock, flags); - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&card->card_lock, flags); - return; - } - - if (tty->count == 1 && port->port.count != 1) { - printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port " - "count tty->count = 1 port count = %d.\n", - card->base, port->port.count); - port->port.count = 1; - } - if (--port->port.count < 0) { - printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port " - "count for channel%d = %d", card->base, port->channel, - port->port.count); - port->port.count = 0; - } + BUG_ON(!ip); - if (port->port.count) { - spin_unlock_irqrestore(&card->card_lock, flags); + card = ip->card; + if (isicom_paranoia_check(ip, tty->name, "isicom_close")) return; - } - port->port.flags |= ASYNC_CLOSING; - tty->closing = 1; - spin_unlock_irqrestore(&card->card_lock, flags); - if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, port->port.closing_wait); /* indicate to the card that no more data can be received on this port */ spin_lock_irqsave(&card->card_lock, flags); - if (port->port.flags & ASYNC_INITIALIZED) { - card->port_status &= ~(1 << port->channel); + if (port->flags & ASYNC_INITIALIZED) { + card->port_status &= ~(1 << ip->channel); outw(card->port_status, card->base + 0x02); } - isicom_shutdown_port(port); + isicom_shutdown_port(ip); spin_unlock_irqrestore(&card->card_lock, flags); isicom_flush_buffer(tty); - tty_ldisc_flush(tty); - - spin_lock_irqsave(&card->card_lock, flags); - tty->closing = 0; - - if (port->port.blocked_open) { - spin_unlock_irqrestore(&card->card_lock, flags); - if (port->port.close_delay) { - pr_dbg("scheduling until time out.\n"); - msleep_interruptible( - jiffies_to_msecs(port->port.close_delay)); - } - spin_lock_irqsave(&card->card_lock, flags); - wake_up_interruptible(&port->port.open_wait); - } - port->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); - wake_up_interruptible(&port->port.close_wait); - spin_unlock_irqrestore(&card->card_lock, flags); + + tty_port_close_end(port, tty); } /* write et all */ @@ -1420,10 +1307,7 @@ static void isicom_hangup(struct tty_struct *tty) isicom_shutdown_port(port); spin_unlock_irqrestore(&port->card->card_lock, flags); - port->port.count = 0; - port->port.flags &= ~ASYNC_NORMAL_ACTIVE; - tty_port_tty_set(&port->port, NULL); - wake_up_interruptible(&port->port.open_wait); + tty_port_hangup(&port->port); } @@ -1452,6 +1336,11 @@ static const struct tty_operations isicom_ops = { .break_ctl = isicom_send_break, }; +static const struct tty_port_operations isicom_port_ops = { + .carrier_raised = isicom_carrier_raised, + .raise_dtr_rts = isicom_raise_dtr_rts, +}; + static int __devinit reset_card(struct pci_dev *pdev, const unsigned int card, unsigned int *signature) { @@ -1794,6 +1683,7 @@ static int __init isicom_init(void) spin_lock_init(&isi_card[idx].card_lock); for (channel = 0; channel < 16; channel++, port++) { tty_port_init(&port->port); + port->port.ops = &isicom_port_ops; port->magic = ISICOM_MAGIC; port->card = &isi_card[idx]; port->channel = channel; diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 4b10770fa937..5c3dc6b8411c 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -151,7 +151,7 @@ static char *stli_drvversion = "5.6.0"; static char *stli_serialname = "ttyE"; static struct tty_driver *stli_serial; - +static const struct tty_port_operations stli_port_ops; #define STLI_TXBUFSIZE 4096 @@ -626,8 +626,6 @@ static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp); static int stli_initopen(struct tty_struct *tty, struct stlibrd *brdp, struct stliport *portp); static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait); static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait); -static int stli_waitcarrier(struct tty_struct *tty, struct stlibrd *brdp, - struct stliport *portp, struct file *filp); static int stli_setport(struct tty_struct *tty); static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback); static void stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback); @@ -769,7 +767,7 @@ static int stli_parsebrd(struct stlconf *confp, char **argp) break; } if (i == ARRAY_SIZE(stli_brdstr)) { - printk("STALLION: unknown board name, %s?\n", argp[0]); + printk(KERN_WARNING "istallion: unknown board name, %s?\n", argp[0]); return 0; } @@ -787,6 +785,7 @@ static int stli_open(struct tty_struct *tty, struct file *filp) { struct stlibrd *brdp; struct stliport *portp; + struct tty_port *port; unsigned int minordev, brdnr, portnr; int rc; @@ -808,30 +807,19 @@ static int stli_open(struct tty_struct *tty, struct file *filp) return -ENODEV; if (portp->devnr < 1) return -ENODEV; - - -/* - * Check if this port is in the middle of closing. If so then wait - * until it is closed then return error status based on flag settings. - * The sleep here does not need interrupt protection since the wakeup - * for it is done with the same context. - */ - if (portp->port.flags & ASYNC_CLOSING) { - interruptible_sleep_on(&portp->port.close_wait); - if (portp->port.flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - return -ERESTARTSYS; - } + port = &portp->port; /* * On the first open of the device setup the port hardware, and * initialize the per port data structure. Since initializing the port * requires several commands to the board we will need to wait for any * other open that is already initializing the port. + * + * Review - locking */ - tty_port_tty_set(&portp->port, tty); + tty_port_tty_set(port, tty); tty->driver_data = portp; - portp->port.count++; + port->count++; wait_event_interruptible(portp->raw_wait, !test_bit(ST_INITIALIZING, &portp->state)); @@ -841,7 +829,8 @@ static int stli_open(struct tty_struct *tty, struct file *filp) if ((portp->port.flags & ASYNC_INITIALIZED) == 0) { set_bit(ST_INITIALIZING, &portp->state); if ((rc = stli_initopen(tty, brdp, portp)) >= 0) { - portp->port.flags |= ASYNC_INITIALIZED; + /* Locking */ + port->flags |= ASYNC_INITIALIZED; clear_bit(TTY_IO_ERROR, &tty->flags); } clear_bit(ST_INITIALIZING, &portp->state); @@ -849,31 +838,7 @@ static int stli_open(struct tty_struct *tty, struct file *filp) if (rc < 0) return rc; } - -/* - * Check if this port is in the middle of closing. If so then wait - * until it is closed then return error status, based on flag settings. - * The sleep here does not need interrupt protection since the wakeup - * for it is done with the same context. - */ - if (portp->port.flags & ASYNC_CLOSING) { - interruptible_sleep_on(&portp->port.close_wait); - if (portp->port.flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - return -ERESTARTSYS; - } - -/* - * Based on type of open being done check if it can overlap with any - * previous opens still in effect. If we are a normal serial device - * then also we might have to wait for carrier. - */ - if (!(filp->f_flags & O_NONBLOCK)) { - if ((rc = stli_waitcarrier(tty, brdp, portp, filp)) != 0) - return rc; - } - portp->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; + return tty_port_block_til_ready(&portp->port, tty, filp); } /*****************************************************************************/ @@ -882,25 +847,16 @@ static void stli_close(struct tty_struct *tty, struct file *filp) { struct stlibrd *brdp; struct stliport *portp; + struct tty_port *port; unsigned long flags; portp = tty->driver_data; if (portp == NULL) return; + port = &portp->port; - spin_lock_irqsave(&stli_lock, flags); - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&stli_lock, flags); - return; - } - if ((tty->count == 1) && (portp->port.count != 1)) - portp->port.count = 1; - if (portp->port.count-- > 1) { - spin_unlock_irqrestore(&stli_lock, flags); + if (tty_port_close_start(port, tty, filp) == 0) return; - } - - portp->port.flags |= ASYNC_CLOSING; /* * May want to wait for data to drain before closing. The BUSY flag @@ -908,15 +864,19 @@ static void stli_close(struct tty_struct *tty, struct file *filp) * updated by messages from the slave - indicating when all chars * really have drained. */ + spin_lock_irqsave(&stli_lock, flags); if (tty == stli_txcooktty) stli_flushchars(tty); - tty->closing = 1; spin_unlock_irqrestore(&stli_lock, flags); + /* We end up doing this twice for the moment. This needs looking at + eventually. Note we still use portp->closing_wait as a result */ if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE) tty_wait_until_sent(tty, portp->closing_wait); - portp->port.flags &= ~ASYNC_INITIALIZED; + /* FIXME: port locking here needs attending to */ + port->flags &= ~ASYNC_INITIALIZED; + brdp = stli_brds[portp->brdnr]; stli_rawclose(brdp, portp, 0, 0); if (tty->termios->c_cflag & HUPCL) { @@ -934,17 +894,8 @@ static void stli_close(struct tty_struct *tty, struct file *filp) set_bit(ST_DOFLUSHRX, &portp->state); stli_flushbuffer(tty); - tty->closing = 0; - tty_port_tty_set(&portp->port, NULL); - - if (portp->openwaitcnt) { - if (portp->close_delay) - msleep_interruptible(jiffies_to_msecs(portp->close_delay)); - wake_up_interruptible(&portp->port.open_wait); - } - - portp->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&portp->port.close_wait); + tty_port_close_end(port, tty); + tty_port_tty_set(port, NULL); } /*****************************************************************************/ @@ -1183,62 +1134,23 @@ static int stli_setport(struct tty_struct *tty) /*****************************************************************************/ -/* - * Possibly need to wait for carrier (DCD signal) to come high. Say - * maybe because if we are clocal then we don't need to wait... - */ - -static int stli_waitcarrier(struct tty_struct *tty, struct stlibrd *brdp, - struct stliport *portp, struct file *filp) +static int stli_carrier_raised(struct tty_port *port) { - unsigned long flags; - int rc, doclocal; - - rc = 0; - doclocal = 0; - - if (tty->termios->c_cflag & CLOCAL) - doclocal++; - - spin_lock_irqsave(&stli_lock, flags); - portp->openwaitcnt++; - if (! tty_hung_up_p(filp)) - portp->port.count--; - spin_unlock_irqrestore(&stli_lock, flags); - - for (;;) { - stli_mkasysigs(&portp->asig, 1, 1); - if ((rc = stli_cmdwait(brdp, portp, A_SETSIGNALS, - &portp->asig, sizeof(asysigs_t), 0)) < 0) - break; - if (tty_hung_up_p(filp) || - ((portp->port.flags & ASYNC_INITIALIZED) == 0)) { - if (portp->port.flags & ASYNC_HUP_NOTIFY) - rc = -EBUSY; - else - rc = -ERESTARTSYS; - break; - } - if (((portp->port.flags & ASYNC_CLOSING) == 0) && - (doclocal || (portp->sigs & TIOCM_CD))) { - break; - } - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - interruptible_sleep_on(&portp->port.open_wait); - } - - spin_lock_irqsave(&stli_lock, flags); - if (! tty_hung_up_p(filp)) - portp->port.count++; - portp->openwaitcnt--; - spin_unlock_irqrestore(&stli_lock, flags); + struct stliport *portp = container_of(port, struct stliport, port); + return (portp->sigs & TIOCM_CD) ? 1 : 0; +} - return rc; +static void stli_raise_dtr_rts(struct tty_port *port) +{ + struct stliport *portp = container_of(port, struct stliport, port); + struct stlibrd *brdp = stli_brds[portp->brdnr]; + stli_mkasysigs(&portp->asig, 1, 1); + if (stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig, + sizeof(asysigs_t), 0) < 0) + printk(KERN_WARNING "istallion: dtr raise failed.\n"); } + /*****************************************************************************/ /* @@ -1550,7 +1462,7 @@ static int stli_getserial(struct stliport *portp, struct serial_struct __user *s sio.irq = 0; sio.flags = portp->port.flags; sio.baud_base = portp->baud_base; - sio.close_delay = portp->close_delay; + sio.close_delay = portp->port.close_delay; sio.closing_wait = portp->closing_wait; sio.custom_divisor = portp->custom_divisor; sio.xmit_fifo_size = 0; @@ -1582,7 +1494,7 @@ static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *s return -EFAULT; if (!capable(CAP_SYS_ADMIN)) { if ((sio.baud_base != portp->baud_base) || - (sio.close_delay != portp->close_delay) || + (sio.close_delay != portp->port.close_delay) || ((sio.flags & ~ASYNC_USR_MASK) != (portp->port.flags & ~ASYNC_USR_MASK))) return -EPERM; @@ -1591,7 +1503,7 @@ static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *s portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) | (sio.flags & ASYNC_USR_MASK); portp->baud_base = sio.baud_base; - portp->close_delay = sio.close_delay; + portp->port.close_delay = sio.close_delay; portp->closing_wait = sio.closing_wait; portp->custom_divisor = sio.custom_divisor; @@ -1821,6 +1733,7 @@ static void stli_hangup(struct tty_struct *tty) { struct stliport *portp; struct stlibrd *brdp; + struct tty_port *port; unsigned long flags; portp = tty->driver_data; @@ -1831,8 +1744,11 @@ static void stli_hangup(struct tty_struct *tty) brdp = stli_brds[portp->brdnr]; if (brdp == NULL) return; + port = &portp->port; - portp->port.flags &= ~ASYNC_INITIALIZED; + spin_lock_irqsave(&port->lock, flags); + port->flags &= ~ASYNC_INITIALIZED; + spin_unlock_irqrestore(&port->lock, flags); if (!test_bit(ST_CLOSING, &portp->state)) stli_rawclose(brdp, portp, 0, 0); @@ -1853,12 +1769,9 @@ static void stli_hangup(struct tty_struct *tty) clear_bit(ST_TXBUSY, &portp->state); clear_bit(ST_RXSTOP, &portp->state); set_bit(TTY_IO_ERROR, &tty->flags); - tty_port_tty_set(&portp->port, NULL); - portp->port.flags &= ~ASYNC_NORMAL_ACTIVE; - portp->port.count = 0; spin_unlock_irqrestore(&stli_lock, flags); - wake_up_interruptible(&portp->port.open_wait); + tty_port_hangup(port); } /*****************************************************************************/ @@ -2132,7 +2045,7 @@ static void __stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigne unsigned char __iomem *bits; if (test_bit(ST_CMDING, &portp->state)) { - printk(KERN_ERR "STALLION: command already busy, cmd=%x!\n", + printk(KERN_ERR "istallion: command already busy, cmd=%x!\n", (int) cmd); return; } @@ -2692,16 +2605,17 @@ static int stli_initports(struct stlibrd *brdp) for (i = 0, panelnr = 0, panelport = 0; (i < brdp->nrports); i++) { portp = kzalloc(sizeof(struct stliport), GFP_KERNEL); if (!portp) { - printk("STALLION: failed to allocate port structure\n"); + printk(KERN_WARNING "istallion: failed to allocate port structure\n"); continue; } tty_port_init(&portp->port); + portp->port.ops = &stli_port_ops; portp->magic = STLI_PORTMAGIC; portp->portnr = i; portp->brdnr = brdp->brdnr; portp->panelnr = panelnr; portp->baud_base = STL_BAUDBASE; - portp->close_delay = STL_CLOSEDELAY; + portp->port.close_delay = STL_CLOSEDELAY; portp->closing_wait = 30 * HZ; init_waitqueue_head(&portp->port.open_wait); init_waitqueue_head(&portp->port.close_wait); @@ -2758,7 +2672,7 @@ static void __iomem *stli_ecpgetmemptr(struct stlibrd *brdp, unsigned long offse unsigned char val; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -2832,7 +2746,7 @@ static void __iomem *stli_ecpeigetmemptr(struct stlibrd *brdp, unsigned long off unsigned char val; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -2884,7 +2798,7 @@ static void __iomem *stli_ecpmcgetmemptr(struct stlibrd *brdp, unsigned long off unsigned char val; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -2929,7 +2843,7 @@ static void __iomem *stli_ecppcigetmemptr(struct stlibrd *brdp, unsigned long of unsigned char val; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), board=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -2994,7 +2908,7 @@ static void __iomem *stli_onbgetmemptr(struct stlibrd *brdp, unsigned long offse void __iomem *ptr; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -3060,7 +2974,7 @@ static void __iomem *stli_onbegetmemptr(struct stlibrd *brdp, unsigned long offs unsigned char val; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -3499,7 +3413,7 @@ static int stli_startbrd(struct stlibrd *brdp) #endif if (nrdevs < (brdp->nrports + 1)) { - printk(KERN_ERR "STALLION: slave failed to allocate memory for " + printk(KERN_ERR "istallion: slave failed to allocate memory for " "all devices, devices=%d\n", nrdevs); brdp->nrports = nrdevs - 1; } @@ -3509,13 +3423,13 @@ static int stli_startbrd(struct stlibrd *brdp) brdp->bitsize = (nrdevs + 7) / 8; memoff = readl(&hdrp->memp); if (memoff > brdp->memsize) { - printk(KERN_ERR "STALLION: corrupted shared memory region?\n"); + printk(KERN_ERR "istallion: corrupted shared memory region?\n"); rc = -EIO; goto stli_donestartup; } memp = (cdkmem_t __iomem *) EBRDGETMEMPTR(brdp, memoff); if (readw(&memp->dtype) != TYP_ASYNCTRL) { - printk(KERN_ERR "STALLION: no slave control device found\n"); + printk(KERN_ERR "istallion: no slave control device found\n"); goto stli_donestartup; } memp++; @@ -3600,7 +3514,7 @@ static int __devinit stli_brdinit(struct stlibrd *brdp) retval = stli_initonb(brdp); break; default: - printk(KERN_ERR "STALLION: board=%d is unknown board " + printk(KERN_ERR "istallion: board=%d is unknown board " "type=%d\n", brdp->brdnr, brdp->brdtype); retval = -ENODEV; } @@ -3609,7 +3523,7 @@ static int __devinit stli_brdinit(struct stlibrd *brdp) return retval; stli_initports(brdp); - printk(KERN_INFO "STALLION: %s found, board=%d io=%x mem=%x " + printk(KERN_INFO "istallion: %s found, board=%d io=%x mem=%x " "nrpanels=%d nrports=%d\n", stli_brdnames[brdp->brdtype], brdp->brdnr, brdp->iobase, (int) brdp->memaddr, brdp->nrpanels, brdp->nrports); @@ -3703,7 +3617,7 @@ static int stli_eisamemprobe(struct stlibrd *brdp) if (! foundit) { brdp->memaddr = 0; brdp->membase = NULL; - printk(KERN_ERR "STALLION: failed to probe shared memory " + printk(KERN_ERR "istallion: failed to probe shared memory " "region for %s in EISA slot=%d\n", stli_brdnames[brdp->brdtype], (brdp->iobase >> 12)); return -ENODEV; @@ -3848,7 +3762,7 @@ static int __devinit stli_pciprobe(struct pci_dev *pdev, mutex_lock(&stli_brdslock); brdnr = stli_getbrdnr(); if (brdnr < 0) { - printk(KERN_INFO "STALLION: too many boards found, " + printk(KERN_INFO "istallion: too many boards found, " "maximum supported %d\n", STL_MAXBRDS); mutex_unlock(&stli_brdslock); retval = -EIO; @@ -3920,7 +3834,7 @@ static struct stlibrd *stli_allocbrd(void) brdp = kzalloc(sizeof(struct stlibrd), GFP_KERNEL); if (!brdp) { - printk(KERN_ERR "STALLION: failed to allocate memory " + printk(KERN_ERR "istallion: failed to allocate memory " "(size=%Zd)\n", sizeof(struct stlibrd)); return NULL; } @@ -4518,6 +4432,11 @@ static const struct tty_operations stli_ops = { .tiocmset = stli_tiocmset, }; +static const struct tty_port_operations stli_port_ops = { + .carrier_raised = stli_carrier_raised, + .raise_dtr_rts = stli_raise_dtr_rts, +}; + /*****************************************************************************/ /* * Loadable module initialization stuff. @@ -4554,7 +4473,7 @@ static int __init istallion_module_init(void) stli_txcookbuf = kmalloc(STLI_TXBUFSIZE, GFP_KERNEL); if (!stli_txcookbuf) { - printk(KERN_ERR "STALLION: failed to allocate memory " + printk(KERN_ERR "istallion: failed to allocate memory " "(size=%d)\n", STLI_TXBUFSIZE); retval = -ENOMEM; goto err; @@ -4579,7 +4498,7 @@ static int __init istallion_module_init(void) retval = tty_register_driver(stli_serial); if (retval) { - printk(KERN_ERR "STALLION: failed to register serial driver\n"); + printk(KERN_ERR "istallion: failed to register serial driver\n"); goto err_ttyput; } @@ -4593,7 +4512,7 @@ static int __init istallion_module_init(void) */ retval = register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stli_fsiomem); if (retval) { - printk(KERN_ERR "STALLION: failed to register serial memory " + printk(KERN_ERR "istallion: failed to register serial memory " "device\n"); goto err_deinit; } diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index 12d327a2c9ba..8b0da97d5293 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -206,6 +206,7 @@ static void moxa_poll(unsigned long); static void moxa_set_tty_param(struct tty_struct *, struct ktermios *); static void moxa_setup_empty_event(struct tty_struct *); static void moxa_shut_down(struct tty_struct *); +static int moxa_carrier_raised(struct tty_port *); /* * moxa board interface functions: */ @@ -405,6 +406,10 @@ static const struct tty_operations moxa_ops = { .tiocmset = moxa_tiocmset, }; +static const struct tty_port_operations moxa_port_ops = { + .carrier_raised = moxa_carrier_raised, +}; + static struct tty_driver *moxaDriver; static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0); static DEFINE_SPINLOCK(moxa_lock); @@ -826,6 +831,7 @@ static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev) for (i = 0, p = brd->ports; i < MAX_PORTS_PER_BOARD; i++, p++) { tty_port_init(&p->port); + p->port.ops = &moxa_port_ops; p->type = PORT_16550A; p->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL; } @@ -1115,15 +1121,27 @@ static void moxa_close_port(struct tty_struct *tty) tty_port_tty_set(&ch->port, NULL); } +static int moxa_carrier_raised(struct tty_port *port) +{ + struct moxa_port *ch = container_of(port, struct moxa_port, port); + int dcd; + + spin_lock_bh(&moxa_lock); + dcd = ch->DCDState; + spin_unlock_bh(&moxa_lock); + return dcd; +} + static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp, struct moxa_port *ch) { + struct tty_port *port = &ch->port; DEFINE_WAIT(wait); int retval = 0; u8 dcd; while (1) { - prepare_to_wait(&ch->port.open_wait, &wait, TASK_INTERRUPTIBLE); + prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE); if (tty_hung_up_p(filp)) { #ifdef SERIAL_DO_RESTART retval = -ERESTARTSYS; @@ -1132,9 +1150,7 @@ static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp, #endif break; } - spin_lock_bh(&moxa_lock); - dcd = ch->DCDState; - spin_unlock_bh(&moxa_lock); + dcd = tty_port_carrier_raised(port); if (dcd) break; @@ -1144,7 +1160,7 @@ static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp, } schedule(); } - finish_wait(&ch->port.open_wait, &wait); + finish_wait(&port->open_wait, &wait); return retval; } diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 047766915411..402c9f217f83 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -541,74 +541,21 @@ static unsigned char mxser_get_msr(int baseaddr, int mode, int port) return status; } -static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp, - struct mxser_port *port) +static int mxser_carrier_raised(struct tty_port *port) { - DECLARE_WAITQUEUE(wait, current); - int retval; - int do_clocal = 0; - unsigned long flags; - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - test_bit(TTY_IO_ERROR, &tty->flags)) { - port->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } + struct mxser_port *mp = container_of(port, struct mxser_port, port); + return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0; +} - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; +static void mxser_raise_dtr_rts(struct tty_port *port) +{ + struct mxser_port *mp = container_of(port, struct mxser_port, port); + unsigned long flags; - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, port->port.count is dropped by one, so that - * mxser_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&port->port.open_wait, &wait); - - spin_lock_irqsave(&port->slock, flags); - if (!tty_hung_up_p(filp)) - port->port.count--; - spin_unlock_irqrestore(&port->slock, flags); - port->port.blocked_open++; - while (1) { - spin_lock_irqsave(&port->slock, flags); - outb(inb(port->ioaddr + UART_MCR) | - UART_MCR_DTR | UART_MCR_RTS, port->ioaddr + UART_MCR); - spin_unlock_irqrestore(&port->slock, flags); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(port->port.flags & ASYNC_INITIALIZED)) { - if (port->port.flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(port->port.flags & ASYNC_CLOSING) && - (do_clocal || - (inb(port->ioaddr + UART_MSR) & UART_MSR_DCD))) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - schedule(); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->port.open_wait, &wait); - if (!tty_hung_up_p(filp)) - port->port.count++; - port->port.blocked_open--; - if (retval) - return retval; - port->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; + spin_lock_irqsave(&mp->slock, flags); + outb(inb(mp->ioaddr + UART_MCR) | + UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR); + spin_unlock_irqrestore(&mp->slock, flags); } static int mxser_set_baud(struct tty_struct *tty, long newspd) @@ -1087,14 +1034,14 @@ static int mxser_open(struct tty_struct *tty, struct file *filp) /* * Start up serial port */ - spin_lock_irqsave(&info->slock, flags); + spin_lock_irqsave(&info->port.lock, flags); info->port.count++; - spin_unlock_irqrestore(&info->slock, flags); + spin_unlock_irqrestore(&info->port.lock, flags); retval = mxser_startup(tty); if (retval) return retval; - retval = mxser_block_til_ready(tty, filp, info); + retval = tty_port_block_til_ready(&info->port, tty, filp); if (retval) return retval; @@ -1133,58 +1080,27 @@ static void mxser_flush_buffer(struct tty_struct *tty) static void mxser_close(struct tty_struct *tty, struct file *filp) { struct mxser_port *info = tty->driver_data; + struct tty_port *port = &info->port; unsigned long timeout; - unsigned long flags; if (tty->index == MXSER_PORTS) return; if (!info) return; - spin_lock_irqsave(&info->slock, flags); - - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&info->slock, flags); - return; - } - if ((tty->count == 1) && (info->port.count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->port.count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk(KERN_ERR "mxser_close: bad serial port count; " - "tty->count is 1, info->port.count is %d\n", info->port.count); - info->port.count = 1; - } - if (--info->port.count < 0) { - printk(KERN_ERR "mxser_close: bad serial port count for " - "ttys%d: %d\n", tty->index, info->port.count); - info->port.count = 0; - } - if (info->port.count) { - spin_unlock_irqrestore(&info->slock, flags); + if (tty_port_close_start(port, tty, filp) == 0) return; - } - info->port.flags |= ASYNC_CLOSING; - spin_unlock_irqrestore(&info->slock, flags); + /* * Save the termios structure, since this port may have * separate termios for callout and dialin. + * + * FIXME: Can this go ? */ if (info->port.flags & ASYNC_NORMAL_ACTIVE) info->normal_termios = *tty->termios; /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->port.closing_wait); - /* * At this point we stop accepting input. To do this, we * disable the receive line status interrupts, and tell the * interrupt driver to stop checking the data ready bit in the @@ -1209,19 +1125,12 @@ static void mxser_close(struct tty_struct *tty, struct file *filp) } } mxser_shutdown(tty); - mxser_flush_buffer(tty); - tty_ldisc_flush(tty); - - tty->closing = 0; - tty_port_tty_set(&info->port, NULL); - if (info->port.blocked_open) { - if (info->port.close_delay) - schedule_timeout_interruptible(info->port.close_delay); - wake_up_interruptible(&info->port.open_wait); - } - info->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); + /* Right now the tty_port set is done outside of the close_end helper + as we don't yet have everyone using refcounts */ + tty_port_close_end(port, tty); + tty_port_tty_set(port, NULL); } static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count) @@ -2146,10 +2055,7 @@ static void mxser_hangup(struct tty_struct *tty) mxser_flush_buffer(tty); mxser_shutdown(tty); - info->port.count = 0; - info->port.flags &= ~ASYNC_NORMAL_ACTIVE; - tty_port_tty_set(&info->port, NULL); - wake_up_interruptible(&info->port.open_wait); + tty_port_hangup(&info->port); } /* @@ -2449,6 +2355,11 @@ static const struct tty_operations mxser_ops = { .tiocmset = mxser_tiocmset, }; +struct tty_port_operations mxser_port_ops = { + .carrier_raised = mxser_carrier_raised, + .raise_dtr_rts = mxser_raise_dtr_rts, +}; + /* * The MOXA Smartio/Industio serial driver boot-time initialization code! */ @@ -2482,6 +2393,7 @@ static int __devinit mxser_initbrd(struct mxser_board *brd, for (i = 0; i < brd->info->nports; i++) { info = &brd->ports[i]; tty_port_init(&info->port); + info->port.ops = &mxser_port_ops; info->board = brd; info->stop_rx = 0; info->ldisc_stop_rx = 0; diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c index 4a8215a89ad3..d2e93e343226 100644 --- a/drivers/char/n_r3964.c +++ b/drivers/char/n_r3964.c @@ -1003,7 +1003,7 @@ static int r3964_open(struct tty_struct *tty) static void r3964_close(struct tty_struct *tty) { - struct r3964_info *pInfo = (struct r3964_info *)tty->disc_data; + struct r3964_info *pInfo = tty->disc_data; struct r3964_client_info *pClient, *pNext; struct r3964_message *pMsg; struct r3964_block_header *pHeader, *pNextHeader; @@ -1058,7 +1058,7 @@ static void r3964_close(struct tty_struct *tty) static ssize_t r3964_read(struct tty_struct *tty, struct file *file, unsigned char __user * buf, size_t nr) { - struct r3964_info *pInfo = (struct r3964_info *)tty->disc_data; + struct r3964_info *pInfo = tty->disc_data; struct r3964_client_info *pClient; struct r3964_message *pMsg; struct r3964_client_message theMsg; @@ -1113,7 +1113,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file, static ssize_t r3964_write(struct tty_struct *tty, struct file *file, const unsigned char *data, size_t count) { - struct r3964_info *pInfo = (struct r3964_info *)tty->disc_data; + struct r3964_info *pInfo = tty->disc_data; struct r3964_block_header *pHeader; struct r3964_client_info *pClient; unsigned char *new_data; @@ -1182,7 +1182,7 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file, static int r3964_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { - struct r3964_info *pInfo = (struct r3964_info *)tty->disc_data; + struct r3964_info *pInfo = tty->disc_data; if (pInfo == NULL) return -EINVAL; switch (cmd) { @@ -1216,7 +1216,7 @@ static void r3964_set_termios(struct tty_struct *tty, struct ktermios *old) static unsigned int r3964_poll(struct tty_struct *tty, struct file *file, struct poll_table_struct *wait) { - struct r3964_info *pInfo = (struct r3964_info *)tty->disc_data; + struct r3964_info *pInfo = tty->disc_data; struct r3964_client_info *pClient; struct r3964_message *pMsg = NULL; unsigned long flags; @@ -1241,7 +1241,7 @@ static unsigned int r3964_poll(struct tty_struct *tty, struct file *file, static void r3964_receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { - struct r3964_info *pInfo = (struct r3964_info *)tty->disc_data; + struct r3964_info *pInfo = tty->disc_data; const unsigned char *p; char *f, flags = 0; int i; diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c index efbfe9612658..f6f0e4ec2b51 100644 --- a/drivers/char/n_tty.c +++ b/drivers/char/n_tty.c @@ -47,8 +47,8 @@ #include <linux/bitops.h> #include <linux/audit.h> #include <linux/file.h> +#include <linux/uaccess.h> -#include <asm/uaccess.h> #include <asm/system.h> /* number of characters left in xmit buffer before select has we have room */ @@ -62,6 +62,17 @@ #define TTY_THRESHOLD_THROTTLE 128 /* now based on remaining room */ #define TTY_THRESHOLD_UNTHROTTLE 128 +/* + * Special byte codes used in the echo buffer to represent operations + * or special handling of characters. Bytes in the echo buffer that + * are not part of such special blocks are treated as normal character + * codes. + */ +#define ECHO_OP_START 0xff +#define ECHO_OP_MOVE_BACK_COL 0x80 +#define ECHO_OP_SET_CANON_COL 0x81 +#define ECHO_OP_ERASE_TAB 0x82 + static inline unsigned char *alloc_buf(void) { gfp_t prio = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; @@ -169,6 +180,7 @@ static void check_unthrottle(struct tty_struct *tty) * * Locking: tty_read_lock for read fields. */ + static void reset_buffer_flags(struct tty_struct *tty) { unsigned long flags; @@ -176,6 +188,11 @@ static void reset_buffer_flags(struct tty_struct *tty) spin_lock_irqsave(&tty->read_lock, flags); tty->read_head = tty->read_tail = tty->read_cnt = 0; spin_unlock_irqrestore(&tty->read_lock, flags); + + mutex_lock(&tty->echo_lock); + tty->echo_pos = tty->echo_cnt = tty->echo_overrun = 0; + mutex_unlock(&tty->echo_lock); + tty->canon_head = tty->canon_data = tty->erasing = 0; memset(&tty->read_flags, 0, sizeof tty->read_flags); n_tty_set_room(tty); @@ -266,89 +283,118 @@ static inline int is_continuation(unsigned char c, struct tty_struct *tty) } /** - * opost - output post processor + * do_output_char - output one character * @c: character (or partial unicode symbol) * @tty: terminal device + * @space: space available in tty driver write buffer * - * Perform OPOST processing. Returns -1 when the output device is - * full and the character must be retried. Note that Linux currently - * ignores TABDLY, CRDLY, VTDLY, FFDLY and NLDLY. They simply aren't - * relevant in the world today. If you ever need them, add them here. + * This is a helper function that handles one output character + * (including special characters like TAB, CR, LF, etc.), + * putting the results in the tty driver's write buffer. + * + * Note that Linux currently ignores TABDLY, CRDLY, VTDLY, FFDLY + * and NLDLY. They simply aren't relevant in the world today. + * If you ever need them, add them here. + * + * Returns the number of bytes of buffer space used or -1 if + * no space left. * - * Called from both the receive and transmit sides and can be called - * re-entrantly. Relies on lock_kernel() for tty->column state. + * Locking: should be called under the output_lock to protect + * the column state and space left in the buffer */ -static int opost(unsigned char c, struct tty_struct *tty) +static int do_output_char(unsigned char c, struct tty_struct *tty, int space) { - int space, spaces; + int spaces; - space = tty_write_room(tty); if (!space) return -1; - lock_kernel(); - if (O_OPOST(tty)) { - switch (c) { - case '\n': - if (O_ONLRET(tty)) - tty->column = 0; - if (O_ONLCR(tty)) { - if (space < 2) { - unlock_kernel(); - return -1; - } - tty_put_char(tty, '\r'); - tty->column = 0; - } - tty->canon_column = tty->column; - break; - case '\r': - if (O_ONOCR(tty) && tty->column == 0) { - unlock_kernel(); - return 0; - } - if (O_OCRNL(tty)) { - c = '\n'; - if (O_ONLRET(tty)) - tty->canon_column = tty->column = 0; - break; - } + switch (c) { + case '\n': + if (O_ONLRET(tty)) + tty->column = 0; + if (O_ONLCR(tty)) { + if (space < 2) + return -1; tty->canon_column = tty->column = 0; + tty_put_char(tty, '\r'); + tty_put_char(tty, c); + return 2; + } + tty->canon_column = tty->column; + break; + case '\r': + if (O_ONOCR(tty) && tty->column == 0) + return 0; + if (O_OCRNL(tty)) { + c = '\n'; + if (O_ONLRET(tty)) + tty->canon_column = tty->column = 0; break; - case '\t': - spaces = 8 - (tty->column & 7); - if (O_TABDLY(tty) == XTABS) { - if (space < spaces) { - unlock_kernel(); - return -1; - } - tty->column += spaces; - tty->ops->write(tty, " ", spaces); - unlock_kernel(); - return 0; - } + } + tty->canon_column = tty->column = 0; + break; + case '\t': + spaces = 8 - (tty->column & 7); + if (O_TABDLY(tty) == XTABS) { + if (space < spaces) + return -1; tty->column += spaces; - break; - case '\b': - if (tty->column > 0) - tty->column--; - break; - default: + tty->ops->write(tty, " ", spaces); + return spaces; + } + tty->column += spaces; + break; + case '\b': + if (tty->column > 0) + tty->column--; + break; + default: + if (!iscntrl(c)) { if (O_OLCUC(tty)) c = toupper(c); - if (!iscntrl(c) && !is_continuation(c, tty)) + if (!is_continuation(c, tty)) tty->column++; - break; } + break; } + tty_put_char(tty, c); - unlock_kernel(); - return 0; + return 1; } /** - * opost_block - block postprocess + * process_output - output post processor + * @c: character (or partial unicode symbol) + * @tty: terminal device + * + * Perform OPOST processing. Returns -1 when the output device is + * full and the character must be retried. + * + * Locking: output_lock to protect column state and space left + * (also, this is called from n_tty_write under the + * tty layer write lock) + */ + +static int process_output(unsigned char c, struct tty_struct *tty) +{ + int space, retval; + + mutex_lock(&tty->output_lock); + + space = tty_write_room(tty); + retval = do_output_char(c, tty, space); + + mutex_unlock(&tty->output_lock); + if (retval < 0) + return -1; + else + return 0; +} + +/** + * process_output_block - block post processor * @tty: terminal device * @inbuf: user buffer * @nr: number of bytes @@ -358,26 +404,32 @@ static int opost(unsigned char c, struct tty_struct *tty) * the simple cases normally found and helps to generate blocks of * symbols for the console driver and thus improve performance. * - * Called from n_tty_write under the tty layer write lock. Relies - * on lock_kernel for the tty->column state. + * Locking: output_lock to protect column state and space left + * (also, this is called from n_tty_write under the + * tty layer write lock) */ -static ssize_t opost_block(struct tty_struct *tty, - const unsigned char *buf, unsigned int nr) +static ssize_t process_output_block(struct tty_struct *tty, + const unsigned char *buf, unsigned int nr) { int space; int i; const unsigned char *cp; + mutex_lock(&tty->output_lock); + space = tty_write_room(tty); - if (!space) + if (!space) { + mutex_unlock(&tty->output_lock); return 0; + } if (nr > space) nr = space; - lock_kernel(); for (i = 0, cp = buf; i < nr; i++, cp++) { - switch (*cp) { + unsigned char c = *cp; + + switch (c) { case '\n': if (O_ONLRET(tty)) tty->column = 0; @@ -399,54 +451,403 @@ static ssize_t opost_block(struct tty_struct *tty, tty->column--; break; default: - if (O_OLCUC(tty)) - goto break_out; - if (!iscntrl(*cp)) - tty->column++; + if (!iscntrl(c)) { + if (O_OLCUC(tty)) + goto break_out; + if (!is_continuation(c, tty)) + tty->column++; + } break; } } break_out: - if (tty->ops->flush_chars) - tty->ops->flush_chars(tty); i = tty->ops->write(tty, buf, i); - unlock_kernel(); + + mutex_unlock(&tty->output_lock); return i; } +/** + * process_echoes - write pending echo characters + * @tty: terminal device + * + * Write previously buffered echo (and other ldisc-generated) + * characters to the tty. + * + * Characters generated by the ldisc (including echoes) need to + * be buffered because the driver's write buffer can fill during + * heavy program output. Echoing straight to the driver will + * often fail under these conditions, causing lost characters and + * resulting mismatches of ldisc state information. + * + * Since the ldisc state must represent the characters actually sent + * to the driver at the time of the write, operations like certain + * changes in column state are also saved in the buffer and executed + * here. + * + * A circular fifo buffer is used so that the most recent characters + * are prioritized. Also, when control characters are echoed with a + * prefixed "^", the pair is treated atomically and thus not separated. + * + * Locking: output_lock to protect column state and space left, + * echo_lock to protect the echo buffer + */ + +static void process_echoes(struct tty_struct *tty) +{ + int space, nr; + unsigned char c; + unsigned char *cp, *buf_end; + + if (!tty->echo_cnt) + return; + + mutex_lock(&tty->output_lock); + mutex_lock(&tty->echo_lock); + + space = tty_write_room(tty); + + buf_end = tty->echo_buf + N_TTY_BUF_SIZE; + cp = tty->echo_buf + tty->echo_pos; + nr = tty->echo_cnt; + while (nr > 0) { + c = *cp; + if (c == ECHO_OP_START) { + unsigned char op; + unsigned char *opp; + int no_space_left = 0; + + /* + * If the buffer byte is the start of a multi-byte + * operation, get the next byte, which is either the + * op code or a control character value. + */ + opp = cp + 1; + if (opp == buf_end) + opp -= N_TTY_BUF_SIZE; + op = *opp; + + switch (op) { + unsigned int num_chars, num_bs; + + case ECHO_OP_ERASE_TAB: + if (++opp == buf_end) + opp -= N_TTY_BUF_SIZE; + num_chars = *opp; + + /* + * Determine how many columns to go back + * in order to erase the tab. + * This depends on the number of columns + * used by other characters within the tab + * area. If this (modulo 8) count is from + * the start of input rather than from a + * previous tab, we offset by canon column. + * Otherwise, tab spacing is normal. + */ + if (!(num_chars & 0x80)) + num_chars += tty->canon_column; + num_bs = 8 - (num_chars & 7); + + if (num_bs > space) { + no_space_left = 1; + break; + } + space -= num_bs; + while (num_bs--) { + tty_put_char(tty, '\b'); + if (tty->column > 0) + tty->column--; + } + cp += 3; + nr -= 3; + break; + + case ECHO_OP_SET_CANON_COL: + tty->canon_column = tty->column; + cp += 2; + nr -= 2; + break; + + case ECHO_OP_MOVE_BACK_COL: + if (tty->column > 0) + tty->column--; + cp += 2; + nr -= 2; + break; + + case ECHO_OP_START: + /* This is an escaped echo op start code */ + if (!space) { + no_space_left = 1; + break; + } + tty_put_char(tty, ECHO_OP_START); + tty->column++; + space--; + cp += 2; + nr -= 2; + break; + + default: + if (iscntrl(op)) { + if (L_ECHOCTL(tty)) { + /* + * Ensure there is enough space + * for the whole ctrl pair. + */ + if (space < 2) { + no_space_left = 1; + break; + } + tty_put_char(tty, '^'); + tty_put_char(tty, op ^ 0100); + tty->column += 2; + space -= 2; + } else { + if (!space) { + no_space_left = 1; + break; + } + tty_put_char(tty, op); + space--; + } + } + /* + * If above falls through, this was an + * undefined op. + */ + cp += 2; + nr -= 2; + } + + if (no_space_left) + break; + } else { + int retval; + + retval = do_output_char(c, tty, space); + if (retval < 0) + break; + space -= retval; + cp += 1; + nr -= 1; + } + + /* When end of circular buffer reached, wrap around */ + if (cp >= buf_end) + cp -= N_TTY_BUF_SIZE; + } + + if (nr == 0) { + tty->echo_pos = 0; + tty->echo_cnt = 0; + tty->echo_overrun = 0; + } else { + int num_processed = tty->echo_cnt - nr; + tty->echo_pos += num_processed; + tty->echo_pos &= N_TTY_BUF_SIZE - 1; + tty->echo_cnt = nr; + if (num_processed > 0) + tty->echo_overrun = 0; + } + + mutex_unlock(&tty->echo_lock); + mutex_unlock(&tty->output_lock); + + if (tty->ops->flush_chars) + tty->ops->flush_chars(tty); +} /** - * echo_char - echo characters + * add_echo_byte - add a byte to the echo buffer + * @c: unicode byte to echo + * @tty: terminal device + * + * Add a character or operation byte to the echo buffer. + * + * Should be called under the echo lock to protect the echo buffer. + */ + +static void add_echo_byte(unsigned char c, struct tty_struct *tty) +{ + int new_byte_pos; + + if (tty->echo_cnt == N_TTY_BUF_SIZE) { + /* Circular buffer is already at capacity */ + new_byte_pos = tty->echo_pos; + + /* + * Since the buffer start position needs to be advanced, + * be sure to step by a whole operation byte group. + */ + if (tty->echo_buf[tty->echo_pos] == ECHO_OP_START) { + if (tty->echo_buf[(tty->echo_pos + 1) & + (N_TTY_BUF_SIZE - 1)] == + ECHO_OP_ERASE_TAB) { + tty->echo_pos += 3; + tty->echo_cnt -= 2; + } else { + tty->echo_pos += 2; + tty->echo_cnt -= 1; + } + } else { + tty->echo_pos++; + } + tty->echo_pos &= N_TTY_BUF_SIZE - 1; + + tty->echo_overrun = 1; + } else { + new_byte_pos = tty->echo_pos + tty->echo_cnt; + new_byte_pos &= N_TTY_BUF_SIZE - 1; + tty->echo_cnt++; + } + + tty->echo_buf[new_byte_pos] = c; +} + +/** + * echo_move_back_col - add operation to move back a column + * @tty: terminal device + * + * Add an operation to the echo buffer to move back one column. + * + * Locking: echo_lock to protect the echo buffer + */ + +static void echo_move_back_col(struct tty_struct *tty) +{ + mutex_lock(&tty->echo_lock); + + add_echo_byte(ECHO_OP_START, tty); + add_echo_byte(ECHO_OP_MOVE_BACK_COL, tty); + + mutex_unlock(&tty->echo_lock); +} + +/** + * echo_set_canon_col - add operation to set the canon column + * @tty: terminal device + * + * Add an operation to the echo buffer to set the canon column + * to the current column. + * + * Locking: echo_lock to protect the echo buffer + */ + +static void echo_set_canon_col(struct tty_struct *tty) +{ + mutex_lock(&tty->echo_lock); + + add_echo_byte(ECHO_OP_START, tty); + add_echo_byte(ECHO_OP_SET_CANON_COL, tty); + + mutex_unlock(&tty->echo_lock); +} + +/** + * echo_erase_tab - add operation to erase a tab + * @num_chars: number of character columns already used + * @after_tab: true if num_chars starts after a previous tab + * @tty: terminal device + * + * Add an operation to the echo buffer to erase a tab. + * + * Called by the eraser function, which knows how many character + * columns have been used since either a previous tab or the start + * of input. This information will be used later, along with + * canon column (if applicable), to go back the correct number + * of columns. + * + * Locking: echo_lock to protect the echo buffer + */ + +static void echo_erase_tab(unsigned int num_chars, int after_tab, + struct tty_struct *tty) +{ + mutex_lock(&tty->echo_lock); + + add_echo_byte(ECHO_OP_START, tty); + add_echo_byte(ECHO_OP_ERASE_TAB, tty); + + /* We only need to know this modulo 8 (tab spacing) */ + num_chars &= 7; + + /* Set the high bit as a flag if num_chars is after a previous tab */ + if (after_tab) + num_chars |= 0x80; + + add_echo_byte(num_chars, tty); + + mutex_unlock(&tty->echo_lock); +} + +/** + * echo_char_raw - echo a character raw * @c: unicode byte to echo * @tty: terminal device * * Echo user input back onto the screen. This must be called only when * L_ECHO(tty) is true. Called from the driver receive_buf path. * - * Relies on BKL for tty column locking + * This variant does not treat control characters specially. + * + * Locking: echo_lock to protect the echo buffer + */ + +static void echo_char_raw(unsigned char c, struct tty_struct *tty) +{ + mutex_lock(&tty->echo_lock); + + if (c == ECHO_OP_START) { + add_echo_byte(ECHO_OP_START, tty); + add_echo_byte(ECHO_OP_START, tty); + } else { + add_echo_byte(c, tty); + } + + mutex_unlock(&tty->echo_lock); +} + +/** + * echo_char - echo a character + * @c: unicode byte to echo + * @tty: terminal device + * + * Echo user input back onto the screen. This must be called only when + * L_ECHO(tty) is true. Called from the driver receive_buf path. + * + * This variant tags control characters to be possibly echoed as + * as "^X" (where X is the letter representing the control char). + * + * Locking: echo_lock to protect the echo buffer */ static void echo_char(unsigned char c, struct tty_struct *tty) { - if (L_ECHOCTL(tty) && iscntrl(c) && c != '\t') { - tty_put_char(tty, '^'); - tty_put_char(tty, c ^ 0100); - tty->column += 2; - } else - opost(c, tty); + mutex_lock(&tty->echo_lock); + + if (c == ECHO_OP_START) { + add_echo_byte(ECHO_OP_START, tty); + add_echo_byte(ECHO_OP_START, tty); + } else { + if (iscntrl(c) && c != '\t') + add_echo_byte(ECHO_OP_START, tty); + add_echo_byte(c, tty); + } + + mutex_unlock(&tty->echo_lock); } /** - * finsh_erasing - complete erase + * finish_erasing - complete erase * @tty: tty doing the erase - * - * Relies on BKL for tty column locking */ + static inline void finish_erasing(struct tty_struct *tty) { if (tty->erasing) { - tty_put_char(tty, '/'); - tty->column++; + echo_char_raw('/', tty); tty->erasing = 0; } } @@ -460,7 +861,7 @@ static inline void finish_erasing(struct tty_struct *tty) * present in the stream from the driver layer. Handles the complexities * of UTF-8 multibyte symbols. * - * Locking: read_lock for tty buffers, BKL for column/erasing state + * Locking: read_lock for tty buffers */ static void eraser(unsigned char c, struct tty_struct *tty) @@ -471,7 +872,7 @@ static void eraser(unsigned char c, struct tty_struct *tty) /* FIXME: locking needed ? */ if (tty->read_head == tty->canon_head) { - /* opost('\a', tty); */ /* what do you think? */ + /* process_output('\a', tty); */ /* what do you think? */ return; } if (c == ERASE_CHAR(tty)) @@ -497,7 +898,7 @@ static void eraser(unsigned char c, struct tty_struct *tty) echo_char(KILL_CHAR(tty), tty); /* Add a newline if ECHOK is on and ECHOKE is off. */ if (L_ECHOK(tty)) - opost('\n', tty); + echo_char_raw('\n', tty); return; } kill_type = KILL; @@ -533,67 +934,61 @@ static void eraser(unsigned char c, struct tty_struct *tty) if (L_ECHO(tty)) { if (L_ECHOPRT(tty)) { if (!tty->erasing) { - tty_put_char(tty, '\\'); - tty->column++; + echo_char_raw('\\', tty); tty->erasing = 1; } /* if cnt > 1, output a multi-byte character */ echo_char(c, tty); while (--cnt > 0) { head = (head+1) & (N_TTY_BUF_SIZE-1); - tty_put_char(tty, tty->read_buf[head]); + echo_char_raw(tty->read_buf[head], tty); + echo_move_back_col(tty); } } else if (kill_type == ERASE && !L_ECHOE(tty)) { echo_char(ERASE_CHAR(tty), tty); } else if (c == '\t') { - unsigned int col = tty->canon_column; - unsigned long tail = tty->canon_head; - - /* Find the column of the last char. */ - while (tail != tty->read_head) { + unsigned int num_chars = 0; + int after_tab = 0; + unsigned long tail = tty->read_head; + + /* + * Count the columns used for characters + * since the start of input or after a + * previous tab. + * This info is used to go back the correct + * number of columns. + */ + while (tail != tty->canon_head) { + tail = (tail-1) & (N_TTY_BUF_SIZE-1); c = tty->read_buf[tail]; - if (c == '\t') - col = (col | 7) + 1; - else if (iscntrl(c)) { + if (c == '\t') { + after_tab = 1; + break; + } else if (iscntrl(c)) { if (L_ECHOCTL(tty)) - col += 2; - } else if (!is_continuation(c, tty)) - col++; - tail = (tail+1) & (N_TTY_BUF_SIZE-1); - } - - /* should never happen */ - if (tty->column > 0x80000000) - tty->column = 0; - - /* Now backup to that column. */ - while (tty->column > col) { - /* Can't use opost here. */ - tty_put_char(tty, '\b'); - if (tty->column > 0) - tty->column--; + num_chars += 2; + } else if (!is_continuation(c, tty)) { + num_chars++; + } } + echo_erase_tab(num_chars, after_tab, tty); } else { if (iscntrl(c) && L_ECHOCTL(tty)) { - tty_put_char(tty, '\b'); - tty_put_char(tty, ' '); - tty_put_char(tty, '\b'); - if (tty->column > 0) - tty->column--; + echo_char_raw('\b', tty); + echo_char_raw(' ', tty); + echo_char_raw('\b', tty); } if (!iscntrl(c) || L_ECHOCTL(tty)) { - tty_put_char(tty, '\b'); - tty_put_char(tty, ' '); - tty_put_char(tty, '\b'); - if (tty->column > 0) - tty->column--; + echo_char_raw('\b', tty); + echo_char_raw(' ', tty); + echo_char_raw('\b', tty); } } } if (kill_type == ERASE) break; } - if (tty->read_head == tty->canon_head) + if (tty->read_head == tty->canon_head && L_ECHO(tty)) finish_erasing(tty); } @@ -712,6 +1107,7 @@ static inline void n_tty_receive_parity_error(struct tty_struct *tty, static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) { unsigned long flags; + int parmrk; if (tty->raw) { put_tty_queue(c, tty); @@ -721,18 +1117,21 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) if (I_ISTRIP(tty)) c &= 0x7f; if (I_IUCLC(tty) && L_IEXTEN(tty)) - c=tolower(c); + c = tolower(c); if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && - ((I_IXANY(tty) && c != START_CHAR(tty) && c != STOP_CHAR(tty)) || - c == INTR_CHAR(tty) || c == QUIT_CHAR(tty) || c == SUSP_CHAR(tty))) + I_IXANY(tty) && c != START_CHAR(tty) && c != STOP_CHAR(tty) && + c != INTR_CHAR(tty) && c != QUIT_CHAR(tty) && c != SUSP_CHAR(tty)) { start_tty(tty); + process_echoes(tty); + } if (tty->closing) { if (I_IXON(tty)) { - if (c == START_CHAR(tty)) + if (c == START_CHAR(tty)) { start_tty(tty); - else if (c == STOP_CHAR(tty)) + process_echoes(tty); + } else if (c == STOP_CHAR(tty)) stop_tty(tty); } return; @@ -745,19 +1144,23 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) * up. */ if (!test_bit(c, tty->process_char_map) || tty->lnext) { - finish_erasing(tty); tty->lnext = 0; + parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0; + if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) { + /* beep if no space */ + if (L_ECHO(tty)) + process_output('\a', tty); + return; + } if (L_ECHO(tty)) { - if (tty->read_cnt >= N_TTY_BUF_SIZE-1) { - tty_put_char(tty, '\a'); /* beep if no space */ - return; - } + finish_erasing(tty); /* Record the column of first canon char. */ if (tty->canon_head == tty->read_head) - tty->canon_column = tty->column; + echo_set_canon_col(tty); echo_char(c, tty); + process_echoes(tty); } - if (I_PARMRK(tty) && c == (unsigned char) '\377') + if (parmrk) put_tty_queue(c, tty); put_tty_queue(c, tty); return; @@ -766,6 +1169,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) if (I_IXON(tty)) { if (c == START_CHAR(tty)) { start_tty(tty); + process_echoes(tty); return; } if (c == STOP_CHAR(tty)) { @@ -786,7 +1190,6 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) if (c == SUSP_CHAR(tty)) { send_signal: /* - * Echo character, and then send the signal. * Note that we do not use isig() here because we want * the order to be: * 1) flush, 2) echo, 3) signal @@ -795,8 +1198,12 @@ send_signal: n_tty_flush_buffer(tty); tty_driver_flush_buffer(tty); } - if (L_ECHO(tty)) + if (I_IXON(tty)) + start_tty(tty); + if (L_ECHO(tty)) { echo_char(c, tty); + process_echoes(tty); + } if (tty->pgrp) kill_pgrp(tty->pgrp, signal, 1); return; @@ -815,6 +1222,7 @@ send_signal: if (c == ERASE_CHAR(tty) || c == KILL_CHAR(tty) || (c == WERASE_CHAR(tty) && L_IEXTEN(tty))) { eraser(c, tty); + process_echoes(tty); return; } if (c == LNEXT_CHAR(tty) && L_IEXTEN(tty)) { @@ -822,8 +1230,9 @@ send_signal: if (L_ECHO(tty)) { finish_erasing(tty); if (L_ECHOCTL(tty)) { - tty_put_char(tty, '^'); - tty_put_char(tty, '\b'); + echo_char_raw('^', tty); + echo_char_raw('\b', tty); + process_echoes(tty); } } return; @@ -834,22 +1243,29 @@ send_signal: finish_erasing(tty); echo_char(c, tty); - opost('\n', tty); + echo_char_raw('\n', tty); while (tail != tty->read_head) { echo_char(tty->read_buf[tail], tty); tail = (tail+1) & (N_TTY_BUF_SIZE-1); } + process_echoes(tty); return; } if (c == '\n') { + if (tty->read_cnt >= N_TTY_BUF_SIZE) { + if (L_ECHO(tty)) + process_output('\a', tty); + return; + } if (L_ECHO(tty) || L_ECHONL(tty)) { - if (tty->read_cnt >= N_TTY_BUF_SIZE-1) - tty_put_char(tty, '\a'); - opost('\n', tty); + echo_char_raw('\n', tty); + process_echoes(tty); } goto handle_newline; } if (c == EOF_CHAR(tty)) { + if (tty->read_cnt >= N_TTY_BUF_SIZE) + return; if (tty->canon_head != tty->read_head) set_bit(TTY_PUSH, &tty->flags); c = __DISABLED_CHAR; @@ -857,22 +1273,28 @@ send_signal: } if ((c == EOL_CHAR(tty)) || (c == EOL2_CHAR(tty) && L_IEXTEN(tty))) { + parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) + ? 1 : 0; + if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk)) { + if (L_ECHO(tty)) + process_output('\a', tty); + return; + } /* * XXX are EOL_CHAR and EOL2_CHAR echoed?!? */ if (L_ECHO(tty)) { - if (tty->read_cnt >= N_TTY_BUF_SIZE-1) - tty_put_char(tty, '\a'); /* Record the column of first canon char. */ if (tty->canon_head == tty->read_head) - tty->canon_column = tty->column; + echo_set_canon_col(tty); echo_char(c, tty); + process_echoes(tty); } /* * XXX does PARMRK doubling happen for * EOL_CHAR and EOL2_CHAR? */ - if (I_PARMRK(tty) && c == (unsigned char) '\377') + if (parmrk) put_tty_queue(c, tty); handle_newline: @@ -889,23 +1311,27 @@ handle_newline: } } - finish_erasing(tty); + parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0; + if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) { + /* beep if no space */ + if (L_ECHO(tty)) + process_output('\a', tty); + return; + } if (L_ECHO(tty)) { - if (tty->read_cnt >= N_TTY_BUF_SIZE-1) { - tty_put_char(tty, '\a'); /* beep if no space */ - return; - } + finish_erasing(tty); if (c == '\n') - opost('\n', tty); + echo_char_raw('\n', tty); else { /* Record the column of first canon char. */ if (tty->canon_head == tty->read_head) - tty->canon_column = tty->column; + echo_set_canon_col(tty); echo_char(c, tty); } + process_echoes(tty); } - if (I_PARMRK(tty) && c == (unsigned char) '\377') + if (parmrk) put_tty_queue(c, tty); put_tty_queue(c, tty); @@ -923,10 +1349,11 @@ handle_newline: static void n_tty_write_wakeup(struct tty_struct *tty) { - if (tty->fasync) { - set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + /* Write out any echoed characters that are still pending */ + process_echoes(tty); + + if (tty->fasync && test_and_clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) kill_fasync(&tty->fasync, SIGIO, POLL_OUT); - } } /** @@ -1134,6 +1561,10 @@ static void n_tty_close(struct tty_struct *tty) free_buf(tty->read_buf); tty->read_buf = NULL; } + if (tty->echo_buf) { + free_buf(tty->echo_buf); + tty->echo_buf = NULL; + } } /** @@ -1151,13 +1582,19 @@ static int n_tty_open(struct tty_struct *tty) if (!tty) return -EINVAL; - /* This one is ugly. Currently a malloc failure here can panic */ + /* These are ugly. Currently a malloc failure here can panic */ if (!tty->read_buf) { tty->read_buf = alloc_buf(); if (!tty->read_buf) return -ENOMEM; } + if (!tty->echo_buf) { + tty->echo_buf = alloc_buf(); + if (!tty->echo_buf) + return -ENOMEM; + } memset(tty->read_buf, 0, N_TTY_BUF_SIZE); + memset(tty->echo_buf, 0, N_TTY_BUF_SIZE); reset_buffer_flags(tty); tty->column = 0; n_tty_set_termios(tty, NULL); @@ -1487,16 +1924,23 @@ do_it_again: * @buf: userspace buffer pointer * @nr: size of I/O * - * Write function of the terminal device. This is serialized with + * Write function of the terminal device. This is serialized with * respect to other write callers but not to termios changes, reads - * and other such events. We must be careful with N_TTY as the receive - * code will echo characters, thus calling driver write methods. + * and other such events. Since the receive code will echo characters, + * thus calling driver write methods, the output_lock is used in + * the output processing functions called here as well as in the + * echo processing function to protect the column state and space + * left in the buffer. * * This code must be sure never to sleep through a hangup. + * + * Locking: output_lock to protect column state and space left + * (note that the process_output*() functions take this + * lock themselves) */ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file, - const unsigned char *buf, size_t nr) + const unsigned char *buf, size_t nr) { const unsigned char *b = buf; DECLARE_WAITQUEUE(wait, current); @@ -1510,6 +1954,9 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file, return retval; } + /* Write out any echoed characters that are still pending */ + process_echoes(tty); + add_wait_queue(&tty->write_wait, &wait); while (1) { set_current_state(TASK_INTERRUPTIBLE); @@ -1523,7 +1970,7 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file, } if (O_OPOST(tty) && !(test_bit(TTY_HW_COOK_OUT, &tty->flags))) { while (nr > 0) { - ssize_t num = opost_block(tty, b, nr); + ssize_t num = process_output_block(tty, b, nr); if (num < 0) { if (num == -EAGAIN) break; @@ -1535,7 +1982,7 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file, if (nr == 0) break; c = *b; - if (opost(c, tty) < 0) + if (process_output(c, tty) < 0) break; b++; nr--; } @@ -1565,6 +2012,8 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file, break_out: __set_current_state(TASK_RUNNING); remove_wait_queue(&tty->write_wait, &wait); + if (b - buf != nr && tty->fasync) + set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); return (b - buf) ? b - buf : retval; } @@ -1663,4 +2112,3 @@ struct tty_ldisc_ops tty_ldisc_N_TTY = { .receive_buf = n_tty_receive_buf, .write_wakeup = n_tty_write_wakeup }; - diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index 9a34a1935283..d6102b644b55 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -353,6 +353,7 @@ struct ctrl_ul { /* This holds all information that is needed regarding a port */ struct port { + struct tty_port port; u8 update_flow_control; struct ctrl_ul ctrl_ul; struct ctrl_dl ctrl_dl; @@ -365,8 +366,6 @@ struct port { u8 toggle_ul; u16 token_dl; - struct tty_struct *tty; - int tty_open_count; /* mutex to ensure one access patch to this port */ struct mutex tty_sem; wait_queue_head_t tty_wait; @@ -788,14 +787,14 @@ static void disable_transmit_dl(enum port_type port, struct nozomi *dc) * Return 1 - send buffer to card and ack. * Return 0 - don't ack, don't send buffer to card. */ -static int send_data(enum port_type index, const struct nozomi *dc) +static int send_data(enum port_type index, struct nozomi *dc) { u32 size = 0; - const struct port *port = &dc->port[index]; + struct port *port = &dc->port[index]; const u8 toggle = port->toggle_ul; void __iomem *addr = port->ul_addr[toggle]; const u32 ul_size = port->ul_size[toggle]; - struct tty_struct *tty = port->tty; + struct tty_struct *tty = tty_port_tty_get(&port->port); /* Get data from tty and place in buf for now */ size = __kfifo_get(port->fifo_ul, dc->send_buf, @@ -803,6 +802,7 @@ static int send_data(enum port_type index, const struct nozomi *dc) if (size == 0) { DBG4("No more data to send, disable link:"); + tty_kref_put(tty); return 0; } @@ -815,6 +815,7 @@ static int send_data(enum port_type index, const struct nozomi *dc) if (tty) tty_wakeup(tty); + tty_kref_put(tty); return 1; } @@ -826,7 +827,7 @@ static int receive_data(enum port_type index, struct nozomi *dc) u32 offset = 4; struct port *port = &dc->port[index]; void __iomem *addr = port->dl_addr[port->toggle_dl]; - struct tty_struct *tty = port->tty; + struct tty_struct *tty = tty_port_tty_get(&port->port); int i; if (unlikely(!tty)) { @@ -870,7 +871,7 @@ static int receive_data(enum port_type index, struct nozomi *dc) } set_bit(index, &dc->flip); - + tty_kref_put(tty); return 1; } @@ -1276,9 +1277,15 @@ static irqreturn_t interrupt_handler(int irq, void *dev_id) exit_handler: spin_unlock(&dc->spin_mutex); - for (a = 0; a < NOZOMI_MAX_PORTS; a++) - if (test_and_clear_bit(a, &dc->flip)) - tty_flip_buffer_push(dc->port[a].tty); + for (a = 0; a < NOZOMI_MAX_PORTS; a++) { + struct tty_struct *tty; + if (test_and_clear_bit(a, &dc->flip)) { + tty = tty_port_tty_get(&dc->port[a].port); + if (tty) + tty_flip_buffer_push(tty); + tty_kref_put(tty); + } + } return IRQ_HANDLED; none: spin_unlock(&dc->spin_mutex); @@ -1453,12 +1460,10 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev, for (i = 0; i < MAX_PORT; i++) { mutex_init(&dc->port[i].tty_sem); - dc->port[i].tty_open_count = 0; - dc->port[i].tty = NULL; + tty_port_init(&dc->port[i].port); tty_register_device(ntty_driver, dc->index_start + i, &pdev->dev); } - return 0; err_free_sbuf: @@ -1482,14 +1487,16 @@ static void __devexit tty_exit(struct nozomi *dc) flush_scheduled_work(); - for (i = 0; i < MAX_PORT; ++i) - if (dc->port[i].tty && \ - list_empty(&dc->port[i].tty->hangup_work.entry)) - tty_hangup(dc->port[i].tty); - + for (i = 0; i < MAX_PORT; ++i) { + struct tty_struct *tty = tty_port_tty_get(&dc->port[i].port); + if (tty && list_empty(&tty->hangup_work.entry)) + tty_hangup(tty); + tty_kref_put(tty); + } + /* Racy below - surely should wait for scheduled work to be done or + complete off a hangup method ? */ while (dc->open_ttys) msleep(1); - for (i = dc->index_start; i < dc->index_start + MAX_PORT; ++i) tty_unregister_device(ntty_driver, i); } @@ -1579,23 +1586,22 @@ static int ntty_open(struct tty_struct *tty, struct file *file) if (mutex_lock_interruptible(&port->tty_sem)) return -ERESTARTSYS; - port->tty_open_count++; + port->port.count++; dc->open_ttys++; /* Enable interrupt downlink for channel */ - if (port->tty_open_count == 1) { + if (port->port.count == 1) { + /* FIXME: is this needed now ? */ tty->low_latency = 1; tty->driver_data = port; - port->tty = tty; + tty_port_tty_set(&port->port, tty); DBG1("open: %d", port->token_dl); spin_lock_irqsave(&dc->spin_mutex, flags); dc->last_ier = dc->last_ier | port->token_dl; writew(dc->last_ier, dc->reg_ier); spin_unlock_irqrestore(&dc->spin_mutex, flags); } - mutex_unlock(&port->tty_sem); - return 0; } @@ -1606,31 +1612,30 @@ static int ntty_open(struct tty_struct *tty, struct file *file) static void ntty_close(struct tty_struct *tty, struct file *file) { struct nozomi *dc = get_dc_by_tty(tty); - struct port *port = tty->driver_data; + struct port *nport = tty->driver_data; + struct tty_port *port = &nport->port; unsigned long flags; - if (!dc || !port) + if (!dc || !nport) return; - if (mutex_lock_interruptible(&port->tty_sem)) - return; + /* Users cannot interrupt a close */ + mutex_lock(&nport->tty_sem); - if (!port->tty_open_count) - goto exit; + WARN_ON(!port->count); dc->open_ttys--; - port->tty_open_count--; + port->count--; + tty_port_tty_set(port, NULL); - if (port->tty_open_count == 0) { - DBG1("close: %d", port->token_dl); + if (port->count == 0) { + DBG1("close: %d", nport->token_dl); spin_lock_irqsave(&dc->spin_mutex, flags); - dc->last_ier &= ~(port->token_dl); + dc->last_ier &= ~(nport->token_dl); writew(dc->last_ier, dc->reg_ier); spin_unlock_irqrestore(&dc->spin_mutex, flags); } - -exit: - mutex_unlock(&port->tty_sem); + mutex_unlock(&nport->tty_sem); } /* @@ -1660,7 +1665,7 @@ static int ntty_write(struct tty_struct *tty, const unsigned char *buffer, return -EAGAIN; } - if (unlikely(!port->tty_open_count)) { + if (unlikely(!port->port.count)) { DBG1(" "); goto exit; } @@ -1710,7 +1715,7 @@ static int ntty_write_room(struct tty_struct *tty) if (!mutex_trylock(&port->tty_sem)) return 0; - if (!port->tty_open_count) + if (!port->port.count) goto exit; room = port->fifo_ul->size - __kfifo_len(port->fifo_ul); @@ -1866,7 +1871,7 @@ static s32 ntty_chars_in_buffer(struct tty_struct *tty) goto exit_in_buffer; } - if (unlikely(!port->tty_open_count)) { + if (unlikely(!port->port.count)) { dev_err(&dc->pdev->dev, "No tty open?\n"); rval = -ENODEV; goto exit_in_buffer; diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 4d64a02612a4..dc073e167abc 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -138,20 +138,15 @@ struct _input_signal_events { */ typedef struct _mgslpc_info { + struct tty_port port; void *if_ptr; /* General purpose pointer (used by SPPP) */ int magic; - int flags; - int count; /* count of opens */ int line; - unsigned short close_delay; - unsigned short closing_wait; /* time to wait before closing */ struct mgsl_icount icount; - struct tty_struct *tty; int timeout; int x_char; /* xon/xoff character */ - int blocked_open; /* # of blocked opens */ unsigned char read_status_mask; unsigned char ignore_status_mask; @@ -170,9 +165,6 @@ typedef struct _mgslpc_info { int rx_buf_count; /* total number of rx buffers */ int rx_frame_count; /* number of full rx buffers */ - wait_queue_head_t open_wait; - wait_queue_head_t close_wait; - wait_queue_head_t status_event_wait_q; wait_queue_head_t event_wait_q; struct timer_list tx_timer; /* HDLC transmit timeout timer */ @@ -375,7 +367,7 @@ static void irq_enable(MGSLPC_INFO *info, unsigned char channel, unsigned short static void rx_start(MGSLPC_INFO *info); static void rx_stop(MGSLPC_INFO *info); -static void tx_start(MGSLPC_INFO *info); +static void tx_start(MGSLPC_INFO *info, struct tty_struct *tty); static void tx_stop(MGSLPC_INFO *info); static void tx_set_idle(MGSLPC_INFO *info); @@ -389,7 +381,8 @@ static void async_mode(MGSLPC_INFO *info); static void tx_timeout(unsigned long context); -static int ioctl_common(MGSLPC_INFO *info, unsigned int cmd, unsigned long arg); +static int carrier_raised(struct tty_port *port); +static void raise_dtr_rts(struct tty_port *port); #if SYNCLINK_GENERIC_HDLC #define dev_to_port(D) (dev_to_hdlc(D)->priv) @@ -410,7 +403,7 @@ static void release_resources(MGSLPC_INFO *info); static void mgslpc_add_device(MGSLPC_INFO *info); static void mgslpc_remove_device(MGSLPC_INFO *info); -static bool rx_get_frame(MGSLPC_INFO *info); +static bool rx_get_frame(MGSLPC_INFO *info, struct tty_struct *tty); static void rx_reset_buffers(MGSLPC_INFO *info); static int rx_alloc_buffers(MGSLPC_INFO *info); static void rx_free_buffers(MGSLPC_INFO *info); @@ -421,7 +414,7 @@ static irqreturn_t mgslpc_isr(int irq, void *dev_id); * Bottom half interrupt handlers */ static void bh_handler(struct work_struct *work); -static void bh_transmit(MGSLPC_INFO *info); +static void bh_transmit(MGSLPC_INFO *info, struct tty_struct *tty); static void bh_status(MGSLPC_INFO *info); /* @@ -432,10 +425,10 @@ static int tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static int get_stats(MGSLPC_INFO *info, struct mgsl_icount __user *user_icount); static int get_params(MGSLPC_INFO *info, MGSL_PARAMS __user *user_params); -static int set_params(MGSLPC_INFO *info, MGSL_PARAMS __user *new_params); +static int set_params(MGSLPC_INFO *info, MGSL_PARAMS __user *new_params, struct tty_struct *tty); static int get_txidle(MGSLPC_INFO *info, int __user *idle_mode); static int set_txidle(MGSLPC_INFO *info, int idle_mode); -static int set_txenable(MGSLPC_INFO *info, int enable); +static int set_txenable(MGSLPC_INFO *info, int enable, struct tty_struct *tty); static int tx_abort(MGSLPC_INFO *info); static int set_rxenable(MGSLPC_INFO *info, int enable); static int wait_events(MGSLPC_INFO *info, int __user *mask); @@ -474,7 +467,7 @@ static struct tty_driver *serial_driver; /* number of characters left in xmit buffer before we ask for more */ #define WAKEUP_CHARS 256 -static void mgslpc_change_params(MGSLPC_INFO *info); +static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty); static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout); /* PCMCIA prototypes */ @@ -517,6 +510,11 @@ static void ldisc_receive_buf(struct tty_struct *tty, } } +static const struct tty_port_operations mgslpc_port_ops = { + .carrier_raised = carrier_raised, + .raise_dtr_rts = raise_dtr_rts +}; + static int mgslpc_probe(struct pcmcia_device *link) { MGSLPC_INFO *info; @@ -532,12 +530,12 @@ static int mgslpc_probe(struct pcmcia_device *link) } info->magic = MGSLPC_MAGIC; + tty_port_init(&info->port); + info->port.ops = &mgslpc_port_ops; INIT_WORK(&info->task, bh_handler); info->max_frame_size = 4096; - info->close_delay = 5*HZ/10; - info->closing_wait = 30*HZ; - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); + info->port.close_delay = 5*HZ/10; + info->port.closing_wait = 30*HZ; init_waitqueue_head(&info->status_event_wait_q); init_waitqueue_head(&info->event_wait_q); spin_lock_init(&info->lock); @@ -784,7 +782,7 @@ static void tx_release(struct tty_struct *tty) spin_lock_irqsave(&info->lock,flags); if (!info->tx_enabled) - tx_start(info); + tx_start(info, tty); spin_unlock_irqrestore(&info->lock,flags); } @@ -823,6 +821,7 @@ static int bh_action(MGSLPC_INFO *info) static void bh_handler(struct work_struct *work) { MGSLPC_INFO *info = container_of(work, MGSLPC_INFO, task); + struct tty_struct *tty; int action; if (!info) @@ -833,6 +832,7 @@ static void bh_handler(struct work_struct *work) __FILE__,__LINE__,info->device_name); info->bh_running = true; + tty = tty_port_tty_get(&info->port); while((action = bh_action(info)) != 0) { @@ -844,10 +844,10 @@ static void bh_handler(struct work_struct *work) switch (action) { case BH_RECEIVE: - while(rx_get_frame(info)); + while(rx_get_frame(info, tty)); break; case BH_TRANSMIT: - bh_transmit(info); + bh_transmit(info, tty); break; case BH_STATUS: bh_status(info); @@ -859,14 +859,14 @@ static void bh_handler(struct work_struct *work) } } + tty_kref_put(tty); if (debug_level >= DEBUG_LEVEL_BH) printk( "%s(%d):bh_handler(%s) exit\n", __FILE__,__LINE__,info->device_name); } -static void bh_transmit(MGSLPC_INFO *info) +static void bh_transmit(MGSLPC_INFO *info, struct tty_struct *tty) { - struct tty_struct *tty = info->tty; if (debug_level >= DEBUG_LEVEL_BH) printk("bh_transmit() entry on %s\n", info->device_name); @@ -945,12 +945,11 @@ static void rx_ready_hdlc(MGSLPC_INFO *info, int eom) issue_command(info, CHA, CMD_RXFIFO); } -static void rx_ready_async(MGSLPC_INFO *info, int tcd) +static void rx_ready_async(MGSLPC_INFO *info, int tcd, struct tty_struct *tty) { unsigned char data, status, flag; int fifo_count; int work = 0; - struct tty_struct *tty = info->tty; struct mgsl_icount *icount = &info->icount; if (tcd) { @@ -1013,7 +1012,7 @@ static void rx_ready_async(MGSLPC_INFO *info, int tcd) } -static void tx_done(MGSLPC_INFO *info) +static void tx_done(MGSLPC_INFO *info, struct tty_struct *tty) { if (!info->tx_active) return; @@ -1042,7 +1041,7 @@ static void tx_done(MGSLPC_INFO *info) else #endif { - if (info->tty->stopped || info->tty->hw_stopped) { + if (tty->stopped || tty->hw_stopped) { tx_stop(info); return; } @@ -1050,7 +1049,7 @@ static void tx_done(MGSLPC_INFO *info) } } -static void tx_ready(MGSLPC_INFO *info) +static void tx_ready(MGSLPC_INFO *info, struct tty_struct *tty) { unsigned char fifo_count = 32; int c; @@ -1062,7 +1061,7 @@ static void tx_ready(MGSLPC_INFO *info) if (!info->tx_active) return; } else { - if (info->tty->stopped || info->tty->hw_stopped) { + if (tty->stopped || tty->hw_stopped) { tx_stop(info); return; } @@ -1099,7 +1098,7 @@ static void tx_ready(MGSLPC_INFO *info) } } -static void cts_change(MGSLPC_INFO *info) +static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty) { get_signals(info); if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) @@ -1112,14 +1111,14 @@ static void cts_change(MGSLPC_INFO *info) wake_up_interruptible(&info->status_event_wait_q); wake_up_interruptible(&info->event_wait_q); - if (info->flags & ASYNC_CTS_FLOW) { - if (info->tty->hw_stopped) { + if (info->port.flags & ASYNC_CTS_FLOW) { + if (tty->hw_stopped) { if (info->serial_signals & SerialSignal_CTS) { if (debug_level >= DEBUG_LEVEL_ISR) printk("CTS tx start..."); - if (info->tty) - info->tty->hw_stopped = 0; - tx_start(info); + if (tty) + tty->hw_stopped = 0; + tx_start(info, tty); info->pending_bh |= BH_TRANSMIT; return; } @@ -1127,8 +1126,8 @@ static void cts_change(MGSLPC_INFO *info) if (!(info->serial_signals & SerialSignal_CTS)) { if (debug_level >= DEBUG_LEVEL_ISR) printk("CTS tx stop..."); - if (info->tty) - info->tty->hw_stopped = 1; + if (tty) + tty->hw_stopped = 1; tx_stop(info); } } @@ -1136,7 +1135,7 @@ static void cts_change(MGSLPC_INFO *info) info->pending_bh |= BH_STATUS; } -static void dcd_change(MGSLPC_INFO *info) +static void dcd_change(MGSLPC_INFO *info, struct tty_struct *tty) { get_signals(info); if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) @@ -1158,17 +1157,17 @@ static void dcd_change(MGSLPC_INFO *info) wake_up_interruptible(&info->status_event_wait_q); wake_up_interruptible(&info->event_wait_q); - if (info->flags & ASYNC_CHECK_CD) { + if (info->port.flags & ASYNC_CHECK_CD) { if (debug_level >= DEBUG_LEVEL_ISR) printk("%s CD now %s...", info->device_name, (info->serial_signals & SerialSignal_DCD) ? "on" : "off"); if (info->serial_signals & SerialSignal_DCD) - wake_up_interruptible(&info->open_wait); + wake_up_interruptible(&info->port.open_wait); else { if (debug_level >= DEBUG_LEVEL_ISR) printk("doing serial hangup..."); - if (info->tty) - tty_hangup(info->tty); + if (tty) + tty_hangup(tty); } } info->pending_bh |= BH_STATUS; @@ -1214,6 +1213,7 @@ static void ri_change(MGSLPC_INFO *info) static irqreturn_t mgslpc_isr(int dummy, void *dev_id) { MGSLPC_INFO *info = dev_id; + struct tty_struct *tty; unsigned short isr; unsigned char gis, pis; int count=0; @@ -1224,6 +1224,8 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id) if (!(info->p_dev->_locked)) return IRQ_HANDLED; + tty = tty_port_tty_get(&info->port); + spin_lock(&info->lock); while ((gis = read_reg(info, CHA + GIS))) { @@ -1239,9 +1241,9 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id) if (gis & (BIT1 + BIT0)) { isr = read_reg16(info, CHB + ISR); if (isr & IRQ_DCD) - dcd_change(info); + dcd_change(info, tty); if (isr & IRQ_CTS) - cts_change(info); + cts_change(info, tty); } if (gis & (BIT3 + BIT2)) { @@ -1258,8 +1260,8 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id) } if (isr & IRQ_BREAK_ON) { info->icount.brk++; - if (info->flags & ASYNC_SAK) - do_SAK(info->tty); + if (info->port.flags & ASYNC_SAK) + do_SAK(tty); } if (isr & IRQ_RXTIME) { issue_command(info, CHA, CMD_RXFIFO_READ); @@ -1268,7 +1270,7 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id) if (info->params.mode == MGSL_MODE_HDLC) rx_ready_hdlc(info, isr & IRQ_RXEOM); else - rx_ready_async(info, isr & IRQ_RXEOM); + rx_ready_async(info, isr & IRQ_RXEOM, tty); } /* transmit IRQs */ @@ -1277,14 +1279,14 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id) info->icount.txabort++; else info->icount.txunder++; - tx_done(info); + tx_done(info, tty); } else if (isr & IRQ_ALLSENT) { info->icount.txok++; - tx_done(info); + tx_done(info, tty); } else if (isr & IRQ_TXFIFO) - tx_ready(info); + tx_ready(info, tty); } if (gis & BIT7) { pis = read_reg(info, CHA + PIS); @@ -1308,6 +1310,7 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id) } spin_unlock(&info->lock); + tty_kref_put(tty); if (debug_level >= DEBUG_LEVEL_ISR) printk("%s(%d):mgslpc_isr(%d)exit.\n", @@ -1318,14 +1321,14 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id) /* Initialize and start device. */ -static int startup(MGSLPC_INFO * info) +static int startup(MGSLPC_INFO * info, struct tty_struct *tty) { int retval = 0; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):startup(%s)\n",__FILE__,__LINE__,info->device_name); - if (info->flags & ASYNC_INITIALIZED) + if (info->port.flags & ASYNC_INITIALIZED) return 0; if (!info->tx_buf) { @@ -1352,30 +1355,30 @@ static int startup(MGSLPC_INFO * info) retval = adapter_test(info); if ( retval ) { - if (capable(CAP_SYS_ADMIN) && info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); + if (capable(CAP_SYS_ADMIN) && tty) + set_bit(TTY_IO_ERROR, &tty->flags); release_resources(info); return retval; } /* program hardware for current parameters */ - mgslpc_change_params(info); + mgslpc_change_params(info, tty); - if (info->tty) - clear_bit(TTY_IO_ERROR, &info->tty->flags); + if (tty) + clear_bit(TTY_IO_ERROR, &tty->flags); - info->flags |= ASYNC_INITIALIZED; + info->port.flags |= ASYNC_INITIALIZED; return 0; } /* Called by mgslpc_close() and mgslpc_hangup() to shutdown hardware */ -static void shutdown(MGSLPC_INFO * info) +static void shutdown(MGSLPC_INFO * info, struct tty_struct *tty) { unsigned long flags; - if (!(info->flags & ASYNC_INITIALIZED)) + if (!(info->port.flags & ASYNC_INITIALIZED)) return; if (debug_level >= DEBUG_LEVEL_INFO) @@ -1402,7 +1405,7 @@ static void shutdown(MGSLPC_INFO * info) /* TODO:disable interrupts instead of reset to preserve signal states */ reset_device(info); - if (!info->tty || info->tty->termios->c_cflag & HUPCL) { + if (!tty || tty->termios->c_cflag & HUPCL) { info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS); set_signals(info); } @@ -1411,13 +1414,13 @@ static void shutdown(MGSLPC_INFO * info) release_resources(info); - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); + if (tty) + set_bit(TTY_IO_ERROR, &tty->flags); - info->flags &= ~ASYNC_INITIALIZED; + info->port.flags &= ~ASYNC_INITIALIZED; } -static void mgslpc_program_hw(MGSLPC_INFO *info) +static void mgslpc_program_hw(MGSLPC_INFO *info, struct tty_struct *tty) { unsigned long flags; @@ -1443,7 +1446,7 @@ static void mgslpc_program_hw(MGSLPC_INFO *info) port_irq_enable(info, (unsigned char) PVR_DSR | PVR_RI); get_signals(info); - if (info->netcount || info->tty->termios->c_cflag & CREAD) + if (info->netcount || (tty && (tty->termios->c_cflag & CREAD))) rx_start(info); spin_unlock_irqrestore(&info->lock,flags); @@ -1451,19 +1454,19 @@ static void mgslpc_program_hw(MGSLPC_INFO *info) /* Reconfigure adapter based on new parameters */ -static void mgslpc_change_params(MGSLPC_INFO *info) +static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty) { unsigned cflag; int bits_per_char; - if (!info->tty || !info->tty->termios) + if (!tty || !tty->termios) return; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_change_params(%s)\n", __FILE__,__LINE__, info->device_name ); - cflag = info->tty->termios->c_cflag; + cflag = tty->termios->c_cflag; /* if B0 rate (hangup) specified then negate DTR and RTS */ /* otherwise assert DTR and RTS */ @@ -1510,7 +1513,7 @@ static void mgslpc_change_params(MGSLPC_INFO *info) * current data rate. */ if (info->params.data_rate <= 460800) { - info->params.data_rate = tty_get_baud_rate(info->tty); + info->params.data_rate = tty_get_baud_rate(tty); } if ( info->params.data_rate ) { @@ -1520,24 +1523,24 @@ static void mgslpc_change_params(MGSLPC_INFO *info) info->timeout += HZ/50; /* Add .02 seconds of slop */ if (cflag & CRTSCTS) - info->flags |= ASYNC_CTS_FLOW; + info->port.flags |= ASYNC_CTS_FLOW; else - info->flags &= ~ASYNC_CTS_FLOW; + info->port.flags &= ~ASYNC_CTS_FLOW; if (cflag & CLOCAL) - info->flags &= ~ASYNC_CHECK_CD; + info->port.flags &= ~ASYNC_CHECK_CD; else - info->flags |= ASYNC_CHECK_CD; + info->port.flags |= ASYNC_CHECK_CD; /* process tty input control flags */ info->read_status_mask = 0; - if (I_INPCK(info->tty)) + if (I_INPCK(tty)) info->read_status_mask |= BIT7 | BIT6; - if (I_IGNPAR(info->tty)) + if (I_IGNPAR(tty)) info->ignore_status_mask |= BIT7 | BIT6; - mgslpc_program_hw(info); + mgslpc_program_hw(info, tty); } /* Add a character to the transmit buffer @@ -1597,7 +1600,7 @@ static void mgslpc_flush_chars(struct tty_struct *tty) spin_lock_irqsave(&info->lock,flags); if (!info->tx_active) - tx_start(info); + tx_start(info, tty); spin_unlock_irqrestore(&info->lock,flags); } @@ -1659,7 +1662,7 @@ start: if (info->tx_count && !tty->stopped && !tty->hw_stopped) { spin_lock_irqsave(&info->lock,flags); if (!info->tx_active) - tx_start(info); + tx_start(info, tty); spin_unlock_irqrestore(&info->lock,flags); } cleanup: @@ -1764,7 +1767,7 @@ static void mgslpc_send_xchar(struct tty_struct *tty, char ch) if (ch) { spin_lock_irqsave(&info->lock,flags); if (!info->tx_enabled) - tx_start(info); + tx_start(info, tty); spin_unlock_irqrestore(&info->lock,flags); } } @@ -1862,7 +1865,7 @@ static int get_params(MGSLPC_INFO * info, MGSL_PARAMS __user *user_params) * * Returns: 0 if success, otherwise error code */ -static int set_params(MGSLPC_INFO * info, MGSL_PARAMS __user *new_params) +static int set_params(MGSLPC_INFO * info, MGSL_PARAMS __user *new_params, struct tty_struct *tty) { unsigned long flags; MGSL_PARAMS tmp_params; @@ -1883,7 +1886,7 @@ static int set_params(MGSLPC_INFO * info, MGSL_PARAMS __user *new_params) memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); spin_unlock_irqrestore(&info->lock,flags); - mgslpc_change_params(info); + mgslpc_change_params(info, tty); return 0; } @@ -1944,7 +1947,7 @@ static int set_interface(MGSLPC_INFO * info, int if_mode) return 0; } -static int set_txenable(MGSLPC_INFO * info, int enable) +static int set_txenable(MGSLPC_INFO * info, int enable, struct tty_struct *tty) { unsigned long flags; @@ -1954,7 +1957,7 @@ static int set_txenable(MGSLPC_INFO * info, int enable) spin_lock_irqsave(&info->lock,flags); if (enable) { if (!info->tx_enabled) - tx_start(info); + tx_start(info, tty); } else { if (info->tx_enabled) tx_stop(info); @@ -2263,6 +2266,11 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) { MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; + int error; + struct mgsl_icount cnow; /* kernel counter temps */ + struct serial_icounter_struct __user *p_cuser; /* user space */ + void __user *argp = (void __user *)arg; + unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__,__LINE__, @@ -2277,22 +2285,11 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file, return -EIO; } - return ioctl_common(info, cmd, arg); -} - -static int ioctl_common(MGSLPC_INFO *info, unsigned int cmd, unsigned long arg) -{ - int error; - struct mgsl_icount cnow; /* kernel counter temps */ - struct serial_icounter_struct __user *p_cuser; /* user space */ - void __user *argp = (void __user *)arg; - unsigned long flags; - switch (cmd) { case MGSL_IOCGPARAMS: return get_params(info, argp); case MGSL_IOCSPARAMS: - return set_params(info, argp); + return set_params(info, argp, tty); case MGSL_IOCGTXIDLE: return get_txidle(info, argp); case MGSL_IOCSTXIDLE: @@ -2302,7 +2299,7 @@ static int ioctl_common(MGSLPC_INFO *info, unsigned int cmd, unsigned long arg) case MGSL_IOCSIF: return set_interface(info,(int)arg); case MGSL_IOCTXENABLE: - return set_txenable(info,(int)arg); + return set_txenable(info,(int)arg, tty); case MGSL_IOCRXENABLE: return set_rxenable(info,(int)arg); case MGSL_IOCTXABORT: @@ -2369,7 +2366,7 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term == RELEVANT_IFLAG(old_termios->c_iflag))) return; - mgslpc_change_params(info); + mgslpc_change_params(info, tty); /* Handle transition to B0 status */ if (old_termios->c_cflag & CBAUD && @@ -2404,81 +2401,34 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term static void mgslpc_close(struct tty_struct *tty, struct file * filp) { MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; + struct tty_port *port = &info->port; if (mgslpc_paranoia_check(info, tty->name, "mgslpc_close")) return; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_close(%s) entry, count=%d\n", - __FILE__,__LINE__, info->device_name, info->count); - - if (!info->count) - return; + __FILE__,__LINE__, info->device_name, port->count); - if (tty_hung_up_p(filp)) - goto cleanup; - - if ((tty->count == 1) && (info->count != 1)) { - /* - * tty->count is 1 and the tty structure will be freed. - * info->count should be one in this case. - * if it's not, correct it so that the port is shutdown. - */ - printk("mgslpc_close: bad refcount; tty->count is 1, " - "info->count is %d\n", info->count); - info->count = 1; - } + WARN_ON(!port->count); - info->count--; - - /* if at least one open remaining, leave hardware active */ - if (info->count) + if (tty_port_close_start(port, tty, filp) == 0) goto cleanup; - info->flags |= ASYNC_CLOSING; - - /* set tty->closing to notify line discipline to - * only process XON/XOFF characters. Only the N_TTY - * discipline appears to use this (ppp does not). - */ - tty->closing = 1; - - /* wait for transmit data to clear all layers */ - - if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) { - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_close(%s) calling tty_wait_until_sent\n", - __FILE__,__LINE__, info->device_name ); - tty_wait_until_sent(tty, info->closing_wait); - } - - if (info->flags & ASYNC_INITIALIZED) + if (port->flags & ASYNC_INITIALIZED) mgslpc_wait_until_sent(tty, info->timeout); mgslpc_flush_buffer(tty); tty_ldisc_flush(tty); - - shutdown(info); - - tty->closing = 0; - info->tty = NULL; - - if (info->blocked_open) { - if (info->close_delay) { - msleep_interruptible(jiffies_to_msecs(info->close_delay)); - } - wake_up_interruptible(&info->open_wait); - } - - info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - - wake_up_interruptible(&info->close_wait); - + shutdown(info, tty); + + tty_port_close_end(port, tty); + tty_port_tty_set(port, NULL); cleanup: if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_close(%s) exit, count=%d\n", __FILE__,__LINE__, - tty->driver->name, info->count); + tty->driver->name, port->count); } /* Wait until the transmitter is empty. @@ -2498,7 +2448,7 @@ static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout) if (mgslpc_paranoia_check(info, tty->name, "mgslpc_wait_until_sent")) return; - if (!(info->flags & ASYNC_INITIALIZED)) + if (!(info->port.flags & ASYNC_INITIALIZED)) goto exit; orig_jiffies = jiffies; @@ -2559,120 +2509,40 @@ static void mgslpc_hangup(struct tty_struct *tty) return; mgslpc_flush_buffer(tty); - shutdown(info); - - info->count = 0; - info->flags &= ~ASYNC_NORMAL_ACTIVE; - info->tty = NULL; - - wake_up_interruptible(&info->open_wait); + shutdown(info, tty); + tty_port_hangup(&info->port); } -/* Block the current process until the specified port - * is ready to be opened. - */ -static int block_til_ready(struct tty_struct *tty, struct file *filp, - MGSLPC_INFO *info) +static int carrier_raised(struct tty_port *port) { - DECLARE_WAITQUEUE(wait, current); - int retval; - bool do_clocal = false; - bool extra_count = false; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):block_til_ready on %s\n", - __FILE__,__LINE__, tty->driver->name ); - - if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ - /* nonblock mode is set or port is not enabled */ - /* just verify that callout device is not active */ - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = true; - - /* Wait for carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, info->count is dropped by one, so that - * mgslpc_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - - retval = 0; - add_wait_queue(&info->open_wait, &wait); - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):block_til_ready before block on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->count ); - - spin_lock_irqsave(&info->lock, flags); - if (!tty_hung_up_p(filp)) { - extra_count = true; - info->count--; - } - spin_unlock_irqrestore(&info->lock, flags); - info->blocked_open++; - - while (1) { - if ((tty->termios->c_cflag & CBAUD)) { - spin_lock_irqsave(&info->lock,flags); - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } - - set_current_state(TASK_INTERRUPTIBLE); - - if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){ - retval = (info->flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS; - break; - } - - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - - if (!(info->flags & ASYNC_CLOSING) && - (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) { - break; - } - - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):block_til_ready blocking on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->count ); - - schedule(); - } - - set_current_state(TASK_RUNNING); - remove_wait_queue(&info->open_wait, &wait); + MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port); + unsigned long flags; - if (extra_count) - info->count++; - info->blocked_open--; + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):block_til_ready after blocking on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->count ); + if (info->serial_signals & SerialSignal_DCD) + return 1; + return 0; +} - if (!retval) - info->flags |= ASYNC_NORMAL_ACTIVE; +static void raise_dtr_rts(struct tty_port *port) +{ + MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port); + unsigned long flags; - return retval; + spin_lock_irqsave(&info->lock,flags); + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); } + static int mgslpc_open(struct tty_struct *tty, struct file * filp) { MGSLPC_INFO *info; + struct tty_port *port; int retval, line; unsigned long flags; @@ -2691,23 +2561,24 @@ static int mgslpc_open(struct tty_struct *tty, struct file * filp) if (mgslpc_paranoia_check(info, tty->name, "mgslpc_open")) return -ENODEV; + port = &info->port; tty->driver_data = info; - info->tty = tty; + tty_port_tty_set(port, tty); if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_open(%s), old ref count = %d\n", - __FILE__,__LINE__,tty->driver->name, info->count); + __FILE__,__LINE__,tty->driver->name, port->count); /* If port is closing, signal caller to try again */ - if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){ - if (info->flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->close_wait); - retval = ((info->flags & ASYNC_HUP_NOTIFY) ? + if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING){ + if (port->flags & ASYNC_CLOSING) + interruptible_sleep_on(&port->close_wait); + retval = ((port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); goto cleanup; } - info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; spin_lock_irqsave(&info->netlock, flags); if (info->netcount) { @@ -2715,17 +2586,19 @@ static int mgslpc_open(struct tty_struct *tty, struct file * filp) spin_unlock_irqrestore(&info->netlock, flags); goto cleanup; } - info->count++; + spin_lock(&port->lock); + port->count++; + spin_unlock(&port->lock); spin_unlock_irqrestore(&info->netlock, flags); - if (info->count == 1) { + if (port->count == 1) { /* 1st open on this device, init hardware */ - retval = startup(info); + retval = startup(info, tty); if (retval < 0) goto cleanup; } - retval = block_til_ready(tty, filp, info); + retval = tty_port_block_til_ready(&info->port, tty, filp); if (retval) { if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):block_til_ready(%s) returned %d\n", @@ -2739,13 +2612,6 @@ static int mgslpc_open(struct tty_struct *tty, struct file * filp) retval = 0; cleanup: - if (retval) { - if (tty->count == 1) - info->tty = NULL; /* tty layer will release tty struct */ - if(info->count) - info->count--; - } - return retval; } @@ -3500,7 +3366,7 @@ static void rx_start(MGSLPC_INFO *info) info->rx_enabled = true; } -static void tx_start(MGSLPC_INFO *info) +static void tx_start(MGSLPC_INFO *info, struct tty_struct *tty) { if (debug_level >= DEBUG_LEVEL_ISR) printk("%s(%d):tx_start(%s)\n", @@ -3524,11 +3390,11 @@ static void tx_start(MGSLPC_INFO *info) if (info->params.mode == MGSL_MODE_ASYNC) { if (!info->tx_active) { info->tx_active = true; - tx_ready(info); + tx_ready(info, tty); } } else { info->tx_active = true; - tx_ready(info); + tx_ready(info, tty); mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(5000)); } @@ -3849,13 +3715,12 @@ static void rx_reset_buffers(MGSLPC_INFO *info) * * Returns true if frame returned, otherwise false */ -static bool rx_get_frame(MGSLPC_INFO *info) +static bool rx_get_frame(MGSLPC_INFO *info, struct tty_struct *tty) { unsigned short status; RXBUF *buf; unsigned int framesize = 0; unsigned long flags; - struct tty_struct *tty = info->tty; bool return_frame = false; if (info->rx_frame_count == 0) @@ -4075,7 +3940,11 @@ static void tx_timeout(unsigned long context) hdlcdev_tx_done(info); else #endif - bh_transmit(info); + { + struct tty_struct *tty = tty_port_tty_get(&info->port); + bh_transmit(info, tty); + tty_kref_put(tty); + } } #if SYNCLINK_GENERIC_HDLC @@ -4094,11 +3963,12 @@ static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, unsigned short parity) { MGSLPC_INFO *info = dev_to_port(dev); + struct tty_struct *tty; unsigned char new_encoding; unsigned short new_crctype; /* return error if TTY interface open */ - if (info->count) + if (info->port.count) return -EBUSY; switch (encoding) @@ -4123,8 +3993,11 @@ static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, info->params.crc_type = new_crctype; /* if network interface up, reprogram hardware */ - if (info->netcount) - mgslpc_program_hw(info); + if (info->netcount) { + tty = tty_port_tty_get(&info->port); + mgslpc_program_hw(info, tty); + tty_kref_put(tty); + } return 0; } @@ -4165,8 +4038,11 @@ static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev) /* start hardware transmitter if necessary */ spin_lock_irqsave(&info->lock,flags); - if (!info->tx_active) - tx_start(info); + if (!info->tx_active) { + struct tty_struct *tty = tty_port_tty_get(&info->port); + tx_start(info, tty); + tty_kref_put(tty); + } spin_unlock_irqrestore(&info->lock,flags); return 0; @@ -4183,6 +4059,7 @@ static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev) static int hdlcdev_open(struct net_device *dev) { MGSLPC_INFO *info = dev_to_port(dev); + struct tty_struct *tty; int rc; unsigned long flags; @@ -4195,7 +4072,7 @@ static int hdlcdev_open(struct net_device *dev) /* arbitrate between network and tty opens */ spin_lock_irqsave(&info->netlock, flags); - if (info->count != 0 || info->netcount != 0) { + if (info->port.count != 0 || info->netcount != 0) { printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name); spin_unlock_irqrestore(&info->netlock, flags); return -EBUSY; @@ -4203,17 +4080,19 @@ static int hdlcdev_open(struct net_device *dev) info->netcount=1; spin_unlock_irqrestore(&info->netlock, flags); + tty = tty_port_tty_get(&info->port); /* claim resources and init adapter */ - if ((rc = startup(info)) != 0) { + if ((rc = startup(info, tty)) != 0) { + tty_kref_put(tty); spin_lock_irqsave(&info->netlock, flags); info->netcount=0; spin_unlock_irqrestore(&info->netlock, flags); return rc; } - /* assert DTR and RTS, apply hardware settings */ info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; - mgslpc_program_hw(info); + mgslpc_program_hw(info, tty); + tty_kref_put(tty); /* enable network layer transmit */ dev->trans_start = jiffies; @@ -4241,6 +4120,7 @@ static int hdlcdev_open(struct net_device *dev) static int hdlcdev_close(struct net_device *dev) { MGSLPC_INFO *info = dev_to_port(dev); + struct tty_struct *tty = tty_port_tty_get(&info->port); unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -4249,8 +4129,8 @@ static int hdlcdev_close(struct net_device *dev) netif_stop_queue(dev); /* shutdown adapter and release resources */ - shutdown(info); - + shutdown(info, tty); + tty_kref_put(tty); hdlc_close(dev); spin_lock_irqsave(&info->netlock, flags); @@ -4281,7 +4161,7 @@ static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name); /* return error if TTY interface open */ - if (info->count) + if (info->port.count) return -EBUSY; if (cmd != SIOCWANDEV) @@ -4354,8 +4234,11 @@ static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) info->params.clock_speed = 0; /* if network interface up, reprogram hardware */ - if (info->netcount) - mgslpc_program_hw(info); + if (info->netcount) { + struct tty_struct *tty = tty_port_tty_get(&info->port); + mgslpc_program_hw(info, tty); + tty_kref_put(tty); + } return 0; default: diff --git a/drivers/char/pty.c b/drivers/char/pty.c index 6d4582712b1f..112a6ba9a96f 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -5,8 +5,6 @@ * * Added support for a Unix98-style ptmx device. * -- C. Scott Ananian <cananian@alumni.princeton.edu>, 14-Jan-1998 - * Added TTY_DO_WRITE_WAKEUP to enable n_tty to send POLL_OUT to - * waiting writers -- Sapan Bhatia <sapan@corewars.org> * * When reading this code see also fs/devpts. In particular note that the * driver_data field is used by the devpts side as a binding to the devpts @@ -217,7 +215,6 @@ static int pty_open(struct tty_struct *tty, struct file *filp) clear_bit(TTY_OTHER_CLOSED, &tty->link->flags); set_bit(TTY_THROTTLED, &tty->flags); - set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); retval = 0; out: return retval; @@ -230,6 +227,55 @@ static void pty_set_termios(struct tty_struct *tty, tty->termios->c_cflag |= (CS8 | CREAD); } +/** + * pty_do_resize - resize event + * @tty: tty being resized + * @real_tty: real tty (not the same as tty if using a pty/tty pair) + * @rows: rows (character) + * @cols: cols (character) + * + * Update the termios variables and send the neccessary signals to + * peform a terminal resize correctly + */ + +int pty_resize(struct tty_struct *tty, struct winsize *ws) +{ + struct pid *pgrp, *rpgrp; + unsigned long flags; + struct tty_struct *pty = tty->link; + + /* For a PTY we need to lock the tty side */ + mutex_lock(&tty->termios_mutex); + if (!memcmp(ws, &tty->winsize, sizeof(*ws))) + goto done; + + /* Get the PID values and reference them so we can + avoid holding the tty ctrl lock while sending signals. + We need to lock these individually however. */ + + spin_lock_irqsave(&tty->ctrl_lock, flags); + pgrp = get_pid(tty->pgrp); + spin_unlock_irqrestore(&tty->ctrl_lock, flags); + + spin_lock_irqsave(&pty->ctrl_lock, flags); + rpgrp = get_pid(pty->pgrp); + spin_unlock_irqrestore(&pty->ctrl_lock, flags); + + if (pgrp) + kill_pgrp(pgrp, SIGWINCH, 1); + if (rpgrp != pgrp && rpgrp) + kill_pgrp(rpgrp, SIGWINCH, 1); + + put_pid(pgrp); + put_pid(rpgrp); + + tty->winsize = *ws; + pty->winsize = *ws; /* Never used so will go away soon */ +done: + mutex_unlock(&tty->termios_mutex); + return 0; +} + static int pty_install(struct tty_driver *driver, struct tty_struct *tty) { struct tty_struct *o_tty; @@ -290,6 +336,7 @@ static const struct tty_operations pty_ops = { .chars_in_buffer = pty_chars_in_buffer, .unthrottle = pty_unthrottle, .set_termios = pty_set_termios, + .resize = pty_resize }; /* Traditional BSD devices */ @@ -319,6 +366,7 @@ static const struct tty_operations pty_ops_bsd = { .unthrottle = pty_unthrottle, .set_termios = pty_set_termios, .ioctl = pty_bsd_ioctl, + .resize = pty_resize }; static void __init legacy_pty_init(void) @@ -561,7 +609,8 @@ static const struct tty_operations ptm_unix98_ops = { .unthrottle = pty_unthrottle, .set_termios = pty_set_termios, .ioctl = pty_unix98_ioctl, - .shutdown = pty_unix98_shutdown + .shutdown = pty_unix98_shutdown, + .resize = pty_resize }; static const struct tty_operations pty_unix98_ops = { diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c index a8f68a3f14dd..2e8a6eed34be 100644 --- a/drivers/char/rio/rio_linux.c +++ b/drivers/char/rio/rio_linux.c @@ -173,7 +173,7 @@ static void rio_disable_tx_interrupts(void *ptr); static void rio_enable_tx_interrupts(void *ptr); static void rio_disable_rx_interrupts(void *ptr); static void rio_enable_rx_interrupts(void *ptr); -static int rio_get_CD(void *ptr); +static int rio_carrier_raised(struct tty_port *port); static void rio_shutdown_port(void *ptr); static int rio_set_real_termios(void *ptr); static void rio_hungup(void *ptr); @@ -224,7 +224,6 @@ static struct real_driver rio_real_driver = { rio_enable_tx_interrupts, rio_disable_rx_interrupts, rio_enable_rx_interrupts, - rio_get_CD, rio_shutdown_port, rio_set_real_termios, rio_chars_in_buffer, @@ -476,9 +475,9 @@ static void rio_enable_rx_interrupts(void *ptr) /* Jeez. Isn't this simple? */ -static int rio_get_CD(void *ptr) +static int rio_carrier_raised(struct tty_port *port) { - struct Port *PortP = ptr; + struct Port *PortP = container_of(port, struct Port, gs.port); int rv; func_enter(); @@ -797,16 +796,9 @@ static int rio_init_drivers(void) return 1; } - -static void *ckmalloc(int size) -{ - void *p; - - p = kzalloc(size, GFP_KERNEL); - return p; -} - - +static const struct tty_port_operations rio_port_ops = { + .carrier_raised = rio_carrier_raised, +}; static int rio_init_datastructures(void) { @@ -826,33 +818,30 @@ static int rio_init_datastructures(void) #define TMIO_SZ sizeof(struct termios *) rio_dprintk(RIO_DEBUG_INIT, "getting : %Zd %Zd %Zd %Zd %Zd bytes\n", RI_SZ, RIO_HOSTS * HOST_SZ, RIO_PORTS * PORT_SZ, RIO_PORTS * TMIO_SZ, RIO_PORTS * TMIO_SZ); - if (!(p = ckmalloc(RI_SZ))) + if (!(p = kzalloc(RI_SZ, GFP_KERNEL))) goto free0; - if (!(p->RIOHosts = ckmalloc(RIO_HOSTS * HOST_SZ))) + if (!(p->RIOHosts = kzalloc(RIO_HOSTS * HOST_SZ, GFP_KERNEL))) goto free1; - if (!(p->RIOPortp = ckmalloc(RIO_PORTS * PORT_SZ))) + if (!(p->RIOPortp = kzalloc(RIO_PORTS * PORT_SZ, GFP_KERNEL))) goto free2; p->RIOConf = RIOConf; rio_dprintk(RIO_DEBUG_INIT, "Got : %p %p %p\n", p, p->RIOHosts, p->RIOPortp); #if 1 for (i = 0; i < RIO_PORTS; i++) { - port = p->RIOPortp[i] = ckmalloc(sizeof(struct Port)); + port = p->RIOPortp[i] = kzalloc(sizeof(struct Port), GFP_KERNEL); if (!port) { goto free6; } rio_dprintk(RIO_DEBUG_INIT, "initing port %d (%d)\n", i, port->Mapped); + tty_port_init(&port->gs.port); + port->gs.port.ops = &rio_port_ops; port->PortNum = i; port->gs.magic = RIO_MAGIC; port->gs.close_delay = HZ / 2; port->gs.closing_wait = 30 * HZ; port->gs.rd = &rio_real_driver; spin_lock_init(&port->portSem); - /* - * Initializing wait queue - */ - init_waitqueue_head(&port->gs.port.open_wait); - init_waitqueue_head(&port->gs.port.close_wait); } #else /* We could postpone initializing them to when they are configured. */ diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c index 2c6c8f33d6b4..9af8d74875bc 100644 --- a/drivers/char/riscom8.c +++ b/drivers/char/riscom8.c @@ -857,98 +857,21 @@ static void rc_shutdown_port(struct tty_struct *tty, rc_shutdown_board(bp); } -static int block_til_ready(struct tty_struct *tty, struct file *filp, - struct riscom_port *port) +static int carrier_raised(struct tty_port *port) { - DECLARE_WAITQUEUE(wait, current); - struct riscom_board *bp = port_Board(port); - int retval; - int do_clocal = 0; - int CD; + struct riscom_port *p = container_of(port, struct riscom_port, port); + struct riscom_board *bp = port_Board(p); unsigned long flags; - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) { - interruptible_sleep_on(&port->port.close_wait); - if (port->port.flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; - } - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - port->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (C_CLOCAL(tty)) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, info->count is dropped by one, so that - * rs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&port->port.open_wait, &wait); - + int CD; + spin_lock_irqsave(&riscom_lock, flags); - - if (!tty_hung_up_p(filp)) - port->port.count--; - + rc_out(bp, CD180_CAR, port_No(p)); + CD = rc_in(bp, CD180_MSVR) & MSVR_CD; + rc_out(bp, CD180_MSVR, MSVR_RTS); + bp->DTR &= ~(1u << port_No(p)); + rc_out(bp, RC_DTR, bp->DTR); spin_unlock_irqrestore(&riscom_lock, flags); - - port->port.blocked_open++; - while (1) { - spin_lock_irqsave(&riscom_lock, flags); - - rc_out(bp, CD180_CAR, port_No(port)); - CD = rc_in(bp, CD180_MSVR) & MSVR_CD; - rc_out(bp, CD180_MSVR, MSVR_RTS); - bp->DTR &= ~(1u << port_No(port)); - rc_out(bp, RC_DTR, bp->DTR); - - spin_unlock_irqrestore(&riscom_lock, flags); - - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(port->port.flags & ASYNC_INITIALIZED)) { - if (port->port.flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(port->port.flags & ASYNC_CLOSING) && - (do_clocal || CD)) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - schedule(); - } - __set_current_state(TASK_RUNNING); - remove_wait_queue(&port->port.open_wait, &wait); - if (!tty_hung_up_p(filp)) - port->port.count++; - port->port.blocked_open--; - if (retval) - return retval; - - port->port.flags |= ASYNC_NORMAL_ACTIVE; - return 0; + return CD; } static int rc_open(struct tty_struct *tty, struct file *filp) @@ -977,13 +900,13 @@ static int rc_open(struct tty_struct *tty, struct file *filp) error = rc_setup_port(bp, port); if (error == 0) - error = block_til_ready(tty, filp, port); + error = tty_port_block_til_ready(&port->port, tty, filp); return error; } static void rc_flush_buffer(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; unsigned long flags; if (rc_paranoia_check(port, tty->name, "rc_flush_buffer")) @@ -998,7 +921,7 @@ static void rc_flush_buffer(struct tty_struct *tty) static void rc_close(struct tty_struct *tty, struct file *filp) { - struct riscom_port *port = (struct riscom_port *) tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; unsigned long flags; unsigned long timeout; @@ -1006,40 +929,19 @@ static void rc_close(struct tty_struct *tty, struct file *filp) if (!port || rc_paranoia_check(port, tty->name, "close")) return; - spin_lock_irqsave(&riscom_lock, flags); - - if (tty_hung_up_p(filp)) - goto out; - bp = port_Board(port); - if ((tty->count == 1) && (port->port.count != 1)) { - printk(KERN_INFO "rc%d: rc_close: bad port count;" - " tty->count is 1, port count is %d\n", - board_No(bp), port->port.count); - port->port.count = 1; - } - if (--port->port.count < 0) { - printk(KERN_INFO "rc%d: rc_close: bad port count " - "for tty%d: %d\n", - board_No(bp), port_No(port), port->port.count); - port->port.count = 0; - } - if (port->port.count) - goto out; - port->port.flags |= ASYNC_CLOSING; - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, port->port.closing_wait); + + if (tty_port_close_start(&port->port, tty, filp) == 0) + return; + /* * At this point we stop accepting input. To do this, we * disable the receive line status interrupts, and tell the * interrupt driver to stop checking the data ready bit in the * line status register. */ + + spin_lock_irqsave(&riscom_lock, flags); port->IER &= ~IER_RXD; if (port->port.flags & ASYNC_INITIALIZED) { port->IER &= ~IER_TXRDY; @@ -1053,33 +955,24 @@ static void rc_close(struct tty_struct *tty, struct file *filp) */ timeout = jiffies + HZ; while (port->IER & IER_TXEMPTY) { + spin_unlock_irqrestore(&riscom_lock, flags); msleep_interruptible(jiffies_to_msecs(port->timeout)); + spin_lock_irqsave(&riscom_lock, flags); if (time_after(jiffies, timeout)) break; } } rc_shutdown_port(tty, bp, port); rc_flush_buffer(tty); - tty_ldisc_flush(tty); - - tty->closing = 0; - port->port.tty = NULL; - if (port->port.blocked_open) { - if (port->port.close_delay) - msleep_interruptible(jiffies_to_msecs(port->port.close_delay)); - wake_up_interruptible(&port->port.open_wait); - } - port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&port->port.close_wait); - -out: spin_unlock_irqrestore(&riscom_lock, flags); + + tty_port_close_end(&port->port, tty); } static int rc_write(struct tty_struct *tty, const unsigned char *buf, int count) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; int c, total = 0; unsigned long flags; @@ -1122,7 +1015,7 @@ static int rc_write(struct tty_struct *tty, static int rc_put_char(struct tty_struct *tty, unsigned char ch) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; unsigned long flags; int ret = 0; @@ -1146,7 +1039,7 @@ out: static void rc_flush_chars(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; unsigned long flags; if (rc_paranoia_check(port, tty->name, "rc_flush_chars")) @@ -1166,7 +1059,7 @@ static void rc_flush_chars(struct tty_struct *tty) static int rc_write_room(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; int ret; if (rc_paranoia_check(port, tty->name, "rc_write_room")) @@ -1180,7 +1073,7 @@ static int rc_write_room(struct tty_struct *tty) static int rc_chars_in_buffer(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; if (rc_paranoia_check(port, tty->name, "rc_chars_in_buffer")) return 0; @@ -1190,7 +1083,7 @@ static int rc_chars_in_buffer(struct tty_struct *tty) static int rc_tiocmget(struct tty_struct *tty, struct file *file) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; unsigned char status; unsigned int result; @@ -1220,7 +1113,7 @@ static int rc_tiocmget(struct tty_struct *tty, struct file *file) static int rc_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; unsigned long flags; struct riscom_board *bp; @@ -1252,7 +1145,7 @@ static int rc_tiocmset(struct tty_struct *tty, struct file *file, static int rc_send_break(struct tty_struct *tty, int length) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp = port_Board(port); unsigned long flags; @@ -1345,7 +1238,7 @@ static int rc_get_serial_info(struct riscom_port *port, static int rc_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, unsigned long arg) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; void __user *argp = (void __user *)arg; int retval; @@ -1371,7 +1264,7 @@ static int rc_ioctl(struct tty_struct *tty, struct file *filp, static void rc_throttle(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; unsigned long flags; @@ -1393,7 +1286,7 @@ static void rc_throttle(struct tty_struct *tty) static void rc_unthrottle(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; unsigned long flags; @@ -1415,7 +1308,7 @@ static void rc_unthrottle(struct tty_struct *tty) static void rc_stop(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; unsigned long flags; @@ -1433,7 +1326,7 @@ static void rc_stop(struct tty_struct *tty) static void rc_start(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; unsigned long flags; @@ -1454,8 +1347,9 @@ static void rc_start(struct tty_struct *tty) static void rc_hangup(struct tty_struct *tty) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; struct riscom_board *bp; + unsigned long flags; if (rc_paranoia_check(port, tty->name, "rc_hangup")) return; @@ -1463,16 +1357,18 @@ static void rc_hangup(struct tty_struct *tty) bp = port_Board(port); rc_shutdown_port(tty, bp, port); + spin_lock_irqsave(&port->port.lock, flags); port->port.count = 0; port->port.flags &= ~ASYNC_NORMAL_ACTIVE; port->port.tty = NULL; wake_up_interruptible(&port->port.open_wait); + spin_unlock_irqrestore(&port->port.lock, flags); } static void rc_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct riscom_port *port = (struct riscom_port *)tty->driver_data; + struct riscom_port *port = tty->driver_data; unsigned long flags; if (rc_paranoia_check(port, tty->name, "rc_set_termios")) @@ -1510,6 +1406,11 @@ static const struct tty_operations riscom_ops = { .break_ctl = rc_send_break, }; +static const struct tty_port_operations riscom_port_ops = { + .carrier_raised = carrier_raised, +}; + + static int __init rc_init_drivers(void) { int error; @@ -1541,6 +1442,7 @@ static int __init rc_init_drivers(void) memset(rc_port, 0, sizeof(rc_port)); for (i = 0; i < RC_NPORT * RC_NBOARD; i++) { tty_port_init(&rc_port[i].port); + rc_port[i].port.ops = &riscom_port_ops; rc_port[i].magic = RISCOM8_MAGIC; } return 0; diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c index 584d791e84a6..f59fc5cea067 100644 --- a/drivers/char/rocket.c +++ b/drivers/char/rocket.c @@ -135,6 +135,7 @@ static int rcktpt_type[NUM_BOARDS]; static int is_PCI[NUM_BOARDS]; static rocketModel_t rocketModel[NUM_BOARDS]; static int max_board; +static const struct tty_port_operations rocket_port_ops; /* * The following arrays define the interrupt bits corresponding to each AIOP. @@ -435,15 +436,15 @@ static void rp_do_transmit(struct r_port *info) #endif if (!info) return; - if (!info->port.tty) { - printk(KERN_WARNING "rp: WARNING %s called with " - "info->port.tty==NULL\n", __func__); + tty = tty_port_tty_get(&info->port); + + if (tty == NULL) { + printk(KERN_WARNING "rp: WARNING %s called with tty==NULL\n", __func__); clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); return; } spin_lock_irqsave(&info->slock, flags); - tty = info->port.tty; info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp); /* Loop sending data to FIFO until done or FIFO full */ @@ -477,6 +478,7 @@ static void rp_do_transmit(struct r_port *info) } spin_unlock_irqrestore(&info->slock, flags); + tty_kref_put(tty); #ifdef ROCKET_DEBUG_INTR printk(KERN_DEBUG "(%d,%d,%d,%d)...\n", info->xmit_cnt, info->xmit_head, @@ -498,18 +500,18 @@ static void rp_handle_port(struct r_port *info) if (!info) return; - if ((info->flags & ROCKET_INITIALIZED) == 0) { + if ((info->port.flags & ASYNC_INITIALIZED) == 0) { printk(KERN_WARNING "rp: WARNING: rp_handle_port called with " "info->flags & NOT_INIT\n"); return; } - if (!info->port.tty) { + tty = tty_port_tty_get(&info->port); + if (!tty) { printk(KERN_WARNING "rp: WARNING: rp_handle_port called with " - "info->port.tty==NULL\n"); + "tty==NULL\n"); return; } cp = &info->channel; - tty = info->port.tty; IntMask = sGetChanIntID(cp) & info->intmask; #ifdef ROCKET_DEBUG_INTR @@ -541,6 +543,7 @@ static void rp_handle_port(struct r_port *info) printk(KERN_INFO "DSR change...\n"); } #endif + tty_kref_put(tty); } /* @@ -649,9 +652,8 @@ static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev) info->board = board; info->aiop = aiop; info->chan = chan; - info->port.closing_wait = 3000; - info->port.close_delay = 50; - init_waitqueue_head(&info->port.open_wait); + tty_port_init(&info->port); + info->port.ops = &rocket_port_ops; init_completion(&info->close_wait); info->flags &= ~ROCKET_MODE_MASK; switch (pc104[board][line]) { @@ -710,7 +712,7 @@ static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev) * Configures a rocketport port according to its termio settings. Called from * user mode into the driver (exception handler). *info CD manipulation is spinlock protected. */ -static void configure_r_port(struct r_port *info, +static void configure_r_port(struct tty_struct *tty, struct r_port *info, struct ktermios *old_termios) { unsigned cflag; @@ -718,7 +720,7 @@ static void configure_r_port(struct r_port *info, unsigned rocketMode; int bits, baud, divisor; CHANNEL_t *cp; - struct ktermios *t = info->port.tty->termios; + struct ktermios *t = tty->termios; cp = &info->channel; cflag = t->c_cflag; @@ -751,7 +753,7 @@ static void configure_r_port(struct r_port *info, } /* baud rate */ - baud = tty_get_baud_rate(info->port.tty); + baud = tty_get_baud_rate(tty); if (!baud) baud = 9600; divisor = ((rp_baud_base[info->board] + (baud >> 1)) / baud) - 1; @@ -769,7 +771,7 @@ static void configure_r_port(struct r_port *info, sSetBaud(cp, divisor); /* FIXME: Should really back compute a baud rate from the divisor */ - tty_encode_baud_rate(info->port.tty, baud, baud); + tty_encode_baud_rate(tty, baud, baud); if (cflag & CRTSCTS) { info->intmask |= DELTA_CTS; @@ -794,15 +796,15 @@ static void configure_r_port(struct r_port *info, * Handle software flow control in the board */ #ifdef ROCKET_SOFT_FLOW - if (I_IXON(info->port.tty)) { + if (I_IXON(tty)) { sEnTxSoftFlowCtl(cp); - if (I_IXANY(info->port.tty)) { + if (I_IXANY(tty)) { sEnIXANY(cp); } else { sDisIXANY(cp); } - sSetTxXONChar(cp, START_CHAR(info->port.tty)); - sSetTxXOFFChar(cp, STOP_CHAR(info->port.tty)); + sSetTxXONChar(cp, START_CHAR(tty)); + sSetTxXOFFChar(cp, STOP_CHAR(tty)); } else { sDisTxSoftFlowCtl(cp); sDisIXANY(cp); @@ -814,24 +816,24 @@ static void configure_r_port(struct r_port *info, * Set up ignore/read mask words */ info->read_status_mask = STMRCVROVRH | 0xFF; - if (I_INPCK(info->port.tty)) + if (I_INPCK(tty)) info->read_status_mask |= STMFRAMEH | STMPARITYH; - if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) + if (I_BRKINT(tty) || I_PARMRK(tty)) info->read_status_mask |= STMBREAKH; /* * Characters to ignore */ info->ignore_status_mask = 0; - if (I_IGNPAR(info->port.tty)) + if (I_IGNPAR(tty)) info->ignore_status_mask |= STMFRAMEH | STMPARITYH; - if (I_IGNBRK(info->port.tty)) { + if (I_IGNBRK(tty)) { info->ignore_status_mask |= STMBREAKH; /* * If we're ignoring parity and break indicators, * ignore overruns too. (For real raw support). */ - if (I_IGNPAR(info->port.tty)) + if (I_IGNPAR(tty)) info->ignore_status_mask |= STMRCVROVRH; } @@ -864,106 +866,17 @@ static void configure_r_port(struct r_port *info, } } -/* info->port.count is considered critical, protected by spinlocks. */ -static int block_til_ready(struct tty_struct *tty, struct file *filp, - struct r_port *info) +static int carrier_raised(struct tty_port *port) { - DECLARE_WAITQUEUE(wait, current); - int retval; - int do_clocal = 0, extra_count = 0; - unsigned long flags; - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp)) - return ((info->flags & ROCKET_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); - if (info->flags & ROCKET_CLOSING) { - if (wait_for_completion_interruptible(&info->close_wait)) - return -ERESTARTSYS; - return ((info->flags & ROCKET_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); - } - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { - info->flags |= ROCKET_NORMAL_ACTIVE; - return 0; - } - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become free. While we are in - * this loop, info->port.count is dropped by one, so that rp_close() knows when to free things. - * We restore it upon exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&info->port.open_wait, &wait); -#ifdef ROCKET_DEBUG_OPEN - printk(KERN_INFO "block_til_ready before block: ttyR%d, count = %d\n", info->line, info->port.count); -#endif - spin_lock_irqsave(&info->slock, flags); - -#ifdef ROCKET_DISABLE_SIMUSAGE - info->flags |= ROCKET_NORMAL_ACTIVE; -#else - if (!tty_hung_up_p(filp)) { - extra_count = 1; - info->port.count--; - } -#endif - info->port.blocked_open++; - - spin_unlock_irqrestore(&info->slock, flags); - - while (1) { - if (tty->termios->c_cflag & CBAUD) { - sSetDTR(&info->channel); - sSetRTS(&info->channel); - } - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(info->flags & ROCKET_INITIALIZED)) { - if (info->flags & ROCKET_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(info->flags & ROCKET_CLOSING) && (do_clocal || (sGetChanStatusLo(&info->channel) & CD_ACT))) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } -#ifdef ROCKET_DEBUG_OPEN - printk(KERN_INFO "block_til_ready blocking: ttyR%d, count = %d, flags=0x%0x\n", - info->line, info->port.count, info->flags); -#endif - schedule(); /* Don't hold spinlock here, will hang PC */ - } - __set_current_state(TASK_RUNNING); - remove_wait_queue(&info->port.open_wait, &wait); - - spin_lock_irqsave(&info->slock, flags); - - if (extra_count) - info->port.count++; - info->port.blocked_open--; - - spin_unlock_irqrestore(&info->slock, flags); + struct r_port *info = container_of(port, struct r_port, port); + return (sGetChanStatusLo(&info->channel) & CD_ACT) ? 1 : 0; +} -#ifdef ROCKET_DEBUG_OPEN - printk(KERN_INFO "block_til_ready after blocking: ttyR%d, count = %d\n", - info->line, info->port.count); -#endif - if (retval) - return retval; - info->flags |= ROCKET_NORMAL_ACTIVE; - return 0; +static void raise_dtr_rts(struct tty_port *port) +{ + struct r_port *info = container_of(port, struct r_port, port); + sSetDTR(&info->channel); + sSetRTS(&info->channel); } /* @@ -973,24 +886,26 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, static int rp_open(struct tty_struct *tty, struct file *filp) { struct r_port *info; + struct tty_port *port; int line = 0, retval; CHANNEL_t *cp; unsigned long page; line = tty->index; - if ((line < 0) || (line >= MAX_RP_PORTS) || ((info = rp_table[line]) == NULL)) + if (line < 0 || line >= MAX_RP_PORTS || ((info = rp_table[line]) == NULL)) return -ENXIO; - + port = &info->port; + page = __get_free_page(GFP_KERNEL); if (!page) return -ENOMEM; - if (info->flags & ROCKET_CLOSING) { + if (port->flags & ASYNC_CLOSING) { retval = wait_for_completion_interruptible(&info->close_wait); free_page(page); if (retval) return retval; - return ((info->flags & ROCKET_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); + return ((port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); } /* @@ -1002,9 +917,9 @@ static int rp_open(struct tty_struct *tty, struct file *filp) info->xmit_buf = (unsigned char *) page; tty->driver_data = info; - info->port.tty = tty; + tty_port_tty_set(port, tty); - if (info->port.count++ == 0) { + if (port->count++ == 0) { atomic_inc(&rp_num_ports_open); #ifdef ROCKET_DEBUG_OPEN @@ -1019,7 +934,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp) /* * Info->count is now 1; so it's safe to sleep now. */ - if ((info->flags & ROCKET_INITIALIZED) == 0) { + if (!test_bit(ASYNC_INITIALIZED, &port->flags)) { cp = &info->channel; sSetRxTrigger(cp, TRIG_1); if (sGetChanStatus(cp) & CD_ACT) @@ -1043,21 +958,21 @@ static int rp_open(struct tty_struct *tty, struct file *filp) sEnRxFIFO(cp); sEnTransmit(cp); - info->flags |= ROCKET_INITIALIZED; + set_bit(ASYNC_INITIALIZED, &info->port.flags); /* * Set up the tty->alt_speed kludge */ if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI) - info->port.tty->alt_speed = 57600; + tty->alt_speed = 57600; if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI) - info->port.tty->alt_speed = 115200; + tty->alt_speed = 115200; if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI) - info->port.tty->alt_speed = 230400; + tty->alt_speed = 230400; if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP) - info->port.tty->alt_speed = 460800; + tty->alt_speed = 460800; - configure_r_port(info, NULL); + configure_r_port(tty, info, NULL); if (tty->termios->c_cflag & CBAUD) { sSetDTR(cp); sSetRTS(cp); @@ -1066,7 +981,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp) /* Starts (or resets) the maint polling loop */ mod_timer(&rocket_timer, jiffies + POLL_PERIOD); - retval = block_til_ready(tty, filp, info); + retval = tty_port_block_til_ready(port, tty, filp); if (retval) { #ifdef ROCKET_DEBUG_OPEN printk(KERN_INFO "rp_open returning after block_til_ready with %d\n", retval); @@ -1081,8 +996,8 @@ static int rp_open(struct tty_struct *tty, struct file *filp) */ static void rp_close(struct tty_struct *tty, struct file *filp) { - struct r_port *info = (struct r_port *) tty->driver_data; - unsigned long flags; + struct r_port *info = tty->driver_data; + struct tty_port *port = &info->port; int timeout; CHANNEL_t *cp; @@ -1093,53 +1008,10 @@ static void rp_close(struct tty_struct *tty, struct file *filp) printk(KERN_INFO "rp_close ttyR%d, count = %d\n", info->line, info->port.count); #endif - if (tty_hung_up_p(filp)) - return; - spin_lock_irqsave(&info->slock, flags); - - if ((tty->count == 1) && (info->port.count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk(KERN_WARNING "rp_close: bad serial port count; " - "tty->count is 1, info->port.count is %d\n", info->port.count); - info->port.count = 1; - } - if (--info->port.count < 0) { - printk(KERN_WARNING "rp_close: bad serial port count for " - "ttyR%d: %d\n", info->line, info->port.count); - info->port.count = 0; - } - if (info->port.count) { - spin_unlock_irqrestore(&info->slock, flags); + if (tty_port_close_start(port, tty, filp) == 0) return; - } - info->flags |= ROCKET_CLOSING; - spin_unlock_irqrestore(&info->slock, flags); cp = &info->channel; - - /* - * Notify the line discpline to only process XON/XOFF characters - */ - tty->closing = 1; - - /* - * If transmission was throttled by the application request, - * just flush the xmit buffer. - */ - if (tty->flow_stopped) - rp_flush_buffer(tty); - - /* - * Wait for the transmit buffer to clear - */ - if (info->port.closing_wait != ROCKET_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->port.closing_wait); /* * Before we drop DTR, make sure the UART transmitter * has completely drained; this is especially @@ -1168,19 +1040,24 @@ static void rp_close(struct tty_struct *tty, struct file *filp) clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); - if (info->port.blocked_open) { - if (info->port.close_delay) { - msleep_interruptible(jiffies_to_msecs(info->port.close_delay)); + /* We can't yet use tty_port_close_end as the buffer handling in this + driver is a bit different to the usual */ + + if (port->blocked_open) { + if (port->close_delay) { + msleep_interruptible(jiffies_to_msecs(port->close_delay)); } - wake_up_interruptible(&info->port.open_wait); + wake_up_interruptible(&port->open_wait); } else { if (info->xmit_buf) { free_page((unsigned long) info->xmit_buf); info->xmit_buf = NULL; } } - info->flags &= ~(ROCKET_INITIALIZED | ROCKET_CLOSING | ROCKET_NORMAL_ACTIVE); + info->port.flags &= ~(ASYNC_INITIALIZED | ASYNC_CLOSING | ASYNC_NORMAL_ACTIVE); tty->closing = 0; + tty_port_tty_set(port, NULL); + wake_up_interruptible(&port->close_wait); complete_all(&info->close_wait); atomic_dec(&rp_num_ports_open); @@ -1195,7 +1072,7 @@ static void rp_close(struct tty_struct *tty, struct file *filp) static void rp_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; unsigned cflag; @@ -1213,7 +1090,7 @@ static void rp_set_termios(struct tty_struct *tty, /* Or CMSPAR */ tty->termios->c_cflag &= ~CMSPAR; - configure_r_port(info, old_termios); + configure_r_port(tty, info, old_termios); cp = &info->channel; @@ -1238,7 +1115,7 @@ static void rp_set_termios(struct tty_struct *tty, static int rp_break(struct tty_struct *tty, int break_state) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; unsigned long flags; if (rocket_paranoia_check(info, "rp_break")) @@ -1284,7 +1161,7 @@ static int sGetChanRI(CHANNEL_T * ChP) */ static int rp_tiocmget(struct tty_struct *tty, struct file *file) { - struct r_port *info = (struct r_port *)tty->driver_data; + struct r_port *info = tty->driver_data; unsigned int control, result, ChanStatus; ChanStatus = sGetChanStatusLo(&info->channel); @@ -1305,7 +1182,7 @@ static int rp_tiocmget(struct tty_struct *tty, struct file *file) static int rp_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct r_port *info = (struct r_port *)tty->driver_data; + struct r_port *info = tty->driver_data; if (set & TIOCM_RTS) info->channel.TxControl[3] |= SET_RTS; @@ -1338,7 +1215,8 @@ static int get_config(struct r_port *info, struct rocket_config __user *retinfo) return 0; } -static int set_config(struct r_port *info, struct rocket_config __user *new_info) +static int set_config(struct tty_struct *tty, struct r_port *info, + struct rocket_config __user *new_info) { struct rocket_config new_serial; @@ -1350,7 +1228,7 @@ static int set_config(struct r_port *info, struct rocket_config __user *new_info if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK)) return -EPERM; info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK)); - configure_r_port(info, NULL); + configure_r_port(tty, info, NULL); return 0; } @@ -1359,15 +1237,15 @@ static int set_config(struct r_port *info, struct rocket_config __user *new_info info->port.closing_wait = new_serial.closing_wait; if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI) - info->port.tty->alt_speed = 57600; + tty->alt_speed = 57600; if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI) - info->port.tty->alt_speed = 115200; + tty->alt_speed = 115200; if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI) - info->port.tty->alt_speed = 230400; + tty->alt_speed = 230400; if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP) - info->port.tty->alt_speed = 460800; + tty->alt_speed = 460800; - configure_r_port(info, NULL); + configure_r_port(tty, info, NULL); return 0; } @@ -1434,7 +1312,7 @@ static int get_version(struct r_port *info, struct rocket_version __user *retver static int rp_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; void __user *argp = (void __user *)arg; int ret = 0; @@ -1452,7 +1330,7 @@ static int rp_ioctl(struct tty_struct *tty, struct file *file, ret = get_config(info, argp); break; case RCKP_SET_CONFIG: - ret = set_config(info, argp); + ret = set_config(tty, info, argp); break; case RCKP_GET_PORTS: ret = get_ports(info, argp); @@ -1472,7 +1350,7 @@ static int rp_ioctl(struct tty_struct *tty, struct file *file, static void rp_send_xchar(struct tty_struct *tty, char ch) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; if (rocket_paranoia_check(info, "rp_send_xchar")) @@ -1487,7 +1365,7 @@ static void rp_send_xchar(struct tty_struct *tty, char ch) static void rp_throttle(struct tty_struct *tty) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; #ifdef ROCKET_DEBUG_THROTTLE @@ -1507,7 +1385,7 @@ static void rp_throttle(struct tty_struct *tty) static void rp_unthrottle(struct tty_struct *tty) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; #ifdef ROCKET_DEBUG_THROTTLE printk(KERN_INFO "unthrottle %s: %d....\n", tty->name, @@ -1534,7 +1412,7 @@ static void rp_unthrottle(struct tty_struct *tty) */ static void rp_stop(struct tty_struct *tty) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; #ifdef ROCKET_DEBUG_FLOW printk(KERN_INFO "stop %s: %d %d....\n", tty->name, @@ -1550,7 +1428,7 @@ static void rp_stop(struct tty_struct *tty) static void rp_start(struct tty_struct *tty) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; #ifdef ROCKET_DEBUG_FLOW printk(KERN_INFO "start %s: %d %d....\n", tty->name, @@ -1570,7 +1448,7 @@ static void rp_start(struct tty_struct *tty) */ static void rp_wait_until_sent(struct tty_struct *tty, int timeout) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; unsigned long orig_jiffies; int check_time, exit_time; @@ -1627,7 +1505,7 @@ static void rp_wait_until_sent(struct tty_struct *tty, int timeout) static void rp_hangup(struct tty_struct *tty) { CHANNEL_t *cp; - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; if (rocket_paranoia_check(info, "rp_hangup")) return; @@ -1636,15 +1514,13 @@ static void rp_hangup(struct tty_struct *tty) printk(KERN_INFO "rp_hangup of ttyR%d...\n", info->line); #endif rp_flush_buffer(tty); - if (info->flags & ROCKET_CLOSING) + if (info->port.flags & ASYNC_CLOSING) return; if (info->port.count) atomic_dec(&rp_num_ports_open); clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); - info->port.count = 0; - info->flags &= ~ROCKET_NORMAL_ACTIVE; - info->port.tty = NULL; + tty_port_hangup(&info->port); cp = &info->channel; sDisRxFIFO(cp); @@ -1653,7 +1529,7 @@ static void rp_hangup(struct tty_struct *tty) sDisCTSFlowCtl(cp); sDisTxSoftFlowCtl(cp); sClrTxXOFF(cp); - info->flags &= ~ROCKET_INITIALIZED; + info->port.flags &= ~ASYNC_INITIALIZED; wake_up_interruptible(&info->port.open_wait); } @@ -1667,7 +1543,7 @@ static void rp_hangup(struct tty_struct *tty) */ static int rp_put_char(struct tty_struct *tty, unsigned char ch) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; unsigned long flags; @@ -1714,7 +1590,7 @@ static int rp_put_char(struct tty_struct *tty, unsigned char ch) static int rp_write(struct tty_struct *tty, const unsigned char *buf, int count) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; const unsigned char *b; int c, retval = 0; @@ -1764,7 +1640,8 @@ static int rp_write(struct tty_struct *tty, /* Write remaining data into the port's xmit_buf */ while (1) { - if (!info->port.tty) /* Seemingly obligatory check... */ + /* Hung up ? */ + if (!test_bit(ASYNC_NORMAL_ACTIVE, &info->port.flags)) goto end; c = min(count, XMIT_BUF_SIZE - info->xmit_cnt - 1); c = min(c, XMIT_BUF_SIZE - info->xmit_head); @@ -1806,7 +1683,7 @@ end: */ static int rp_write_room(struct tty_struct *tty) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; int ret; if (rocket_paranoia_check(info, "rp_write_room")) @@ -1827,7 +1704,7 @@ static int rp_write_room(struct tty_struct *tty) */ static int rp_chars_in_buffer(struct tty_struct *tty) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; if (rocket_paranoia_check(info, "rp_chars_in_buffer")) @@ -1848,7 +1725,7 @@ static int rp_chars_in_buffer(struct tty_struct *tty) */ static void rp_flush_buffer(struct tty_struct *tty) { - struct r_port *info = (struct r_port *) tty->driver_data; + struct r_port *info = tty->driver_data; CHANNEL_t *cp; unsigned long flags; @@ -2371,6 +2248,11 @@ static const struct tty_operations rocket_ops = { .tiocmset = rp_tiocmset, }; +static const struct tty_port_operations rocket_port_ops = { + .carrier_raised = carrier_raised, + .raise_dtr_rts = raise_dtr_rts, +}; + /* * The module "startup" routine; it's run when the module is loaded. */ diff --git a/drivers/char/rocket.h b/drivers/char/rocket.h index a8b09195ebba..ec863f35f1a9 100644 --- a/drivers/char/rocket.h +++ b/drivers/char/rocket.h @@ -39,7 +39,7 @@ struct rocket_version { /* * Rocketport flags */ -#define ROCKET_CALLOUT_NOHUP 0x00000001 +/*#define ROCKET_CALLOUT_NOHUP 0x00000001 */ #define ROCKET_FORCE_CD 0x00000002 #define ROCKET_HUP_NOTIFY 0x00000004 #define ROCKET_SPLIT_TERMIOS 0x00000008 diff --git a/drivers/char/rocket_int.h b/drivers/char/rocket_int.h index 21f3ff53ba32..67e0f1e778a2 100644 --- a/drivers/char/rocket_int.h +++ b/drivers/char/rocket_int.h @@ -1162,11 +1162,6 @@ struct r_port { /* number of characters left in xmit buffer before we ask for more */ #define WAKEUP_CHARS 256 -/* Internal flags used only by the rocketport driver */ -#define ROCKET_INITIALIZED 0x80000000 /* Port is active */ -#define ROCKET_CLOSING 0x40000000 /* Serial port is closing */ -#define ROCKET_NORMAL_ACTIVE 0x20000000 /* Normal port is active */ - /* * Assigned major numbers for the Comtrol Rocketport */ diff --git a/drivers/char/selection.c b/drivers/char/selection.c index 2978a49a172b..f29fbe9b8ed7 100644 --- a/drivers/char/selection.c +++ b/drivers/char/selection.c @@ -306,7 +306,7 @@ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *t */ int paste_selection(struct tty_struct *tty) { - struct vc_data *vc = (struct vc_data *)tty->driver_data; + struct vc_data *vc = tty->driver_data; int pasted = 0; unsigned int count; struct tty_ldisc *ld; diff --git a/drivers/char/ser_a2232.c b/drivers/char/ser_a2232.c index 7b0c35207d9b..33872a219df6 100644 --- a/drivers/char/ser_a2232.c +++ b/drivers/char/ser_a2232.c @@ -122,7 +122,7 @@ static void a2232_disable_tx_interrupts(void *ptr); static void a2232_enable_tx_interrupts(void *ptr); static void a2232_disable_rx_interrupts(void *ptr); static void a2232_enable_rx_interrupts(void *ptr); -static int a2232_get_CD(void *ptr); +static int a2232_carrier_raised(struct tty_port *port); static void a2232_shutdown_port(void *ptr); static int a2232_set_real_termios(void *ptr); static int a2232_chars_in_buffer(void *ptr); @@ -148,7 +148,6 @@ static struct real_driver a2232_real_driver = { a2232_enable_tx_interrupts, a2232_disable_rx_interrupts, a2232_enable_rx_interrupts, - a2232_get_CD, a2232_shutdown_port, a2232_set_real_termios, a2232_chars_in_buffer, @@ -260,9 +259,10 @@ static void a2232_enable_rx_interrupts(void *ptr) port->disable_rx = 0; } -static int a2232_get_CD(void *ptr) +static int a2232_carrier_raised(struct tty_port *port) { - return ((struct a2232_port *) ptr)->cd_status; + struct a2232_port *ap = container_of(port, struct a2232_port, gs.port); + return ap->cd_status; } static void a2232_shutdown_port(void *ptr) @@ -460,14 +460,14 @@ static void a2232_throttle(struct tty_struct *tty) if switched on. So the only thing we can do at this layer here is not taking any characters out of the A2232 buffer any more. */ - struct a2232_port *port = (struct a2232_port *) tty->driver_data; + struct a2232_port *port = tty->driver_data; port->throttle_input = -1; } static void a2232_unthrottle(struct tty_struct *tty) { /* Unthrottle: dual to "throttle()" above. */ - struct a2232_port *port = (struct a2232_port *) tty->driver_data; + struct a2232_port *port = tty->driver_data; port->throttle_input = 0; } @@ -638,6 +638,10 @@ int ch, err, n, p; return IRQ_HANDLED; } +static const struct tty_port_operations a2232_port_ops = { + .carrier_raised = a2232_carrier_raised, +}; + static void a2232_init_portstructs(void) { struct a2232_port *port; @@ -645,6 +649,8 @@ static void a2232_init_portstructs(void) for (i = 0; i < MAX_A2232_BOARDS*NUMLINES; i++) { port = a2232_ports + i; + tty_port_init(&port->gs.port); + port->gs.port.ops = &a2232_port_ops; port->which_a2232 = i/NUMLINES; port->which_port_on_a2232 = i%NUMLINES; port->disable_rx = port->throttle_input = port->cd_status = 0; @@ -652,11 +658,6 @@ static void a2232_init_portstructs(void) port->gs.close_delay = HZ/2; port->gs.closing_wait = 30 * HZ; port->gs.rd = &a2232_real_driver; -#ifdef NEW_WRITE_LOCKING - mutex_init(&(port->gs.port_write_mutex)); -#endif - init_waitqueue_head(&port->gs.port.open_wait); - init_waitqueue_head(&port->gs.port.close_wait); } } diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index a8f15e6be594..f1f24f0ee26f 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -315,7 +315,7 @@ u_short write_cy_cmd(volatile u_char * base_addr, u_char cmd) static void cy_stop(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; int channel; unsigned long flags; @@ -337,7 +337,7 @@ static void cy_stop(struct tty_struct *tty) static void cy_start(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR; int channel; unsigned long flags; @@ -1062,7 +1062,7 @@ static void config_setup(struct cyclades_port *info) static int cy_put_char(struct tty_struct *tty, unsigned char ch) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; unsigned long flags; #ifdef SERIAL_DEBUG_IO @@ -1090,7 +1090,7 @@ static int cy_put_char(struct tty_struct *tty, unsigned char ch) static void cy_flush_chars(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; unsigned long flags; volatile unsigned char *base_addr = (u_char *) BASE_ADDR; int channel; @@ -1122,7 +1122,7 @@ static void cy_flush_chars(struct tty_struct *tty) */ static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; unsigned long flags; int c, total = 0; @@ -1166,7 +1166,7 @@ static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) static int cy_write_room(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; int ret; #ifdef SERIAL_DEBUG_IO @@ -1183,7 +1183,7 @@ static int cy_write_room(struct tty_struct *tty) static int cy_chars_in_buffer(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; #ifdef SERIAL_DEBUG_IO printk("cy_chars_in_buffer %s %d\n", tty->name, info->xmit_cnt); /* */ @@ -1197,7 +1197,7 @@ static int cy_chars_in_buffer(struct tty_struct *tty) static void cy_flush_buffer(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; unsigned long flags; #ifdef SERIAL_DEBUG_IO @@ -1218,7 +1218,7 @@ static void cy_flush_buffer(struct tty_struct *tty) */ static void cy_throttle(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; unsigned long flags; volatile unsigned char *base_addr = (u_char *) BASE_ADDR; int channel; @@ -1250,7 +1250,7 @@ static void cy_throttle(struct tty_struct *tty) static void cy_unthrottle(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; unsigned long flags; volatile unsigned char *base_addr = (u_char *) BASE_ADDR; int channel; @@ -1345,7 +1345,7 @@ check_and_exit: static int cy_tiocmget(struct tty_struct *tty, struct file *file) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; int channel; volatile unsigned char *base_addr = (u_char *) BASE_ADDR; unsigned long flags; @@ -1369,7 +1369,7 @@ static int cy_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; int channel; volatile unsigned char *base_addr = (u_char *) BASE_ADDR; unsigned long flags; @@ -1532,7 +1532,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { unsigned long val; - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; int ret_val = 0; void __user *argp = (void __user *)arg; @@ -1607,7 +1607,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file, static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; #ifdef SERIAL_DEBUG_OTHER printk("cy_set_termios %s\n", tty->name); @@ -1631,7 +1631,7 @@ static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios) static void cy_close(struct tty_struct *tty, struct file *filp) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; /* CP('C'); */ #ifdef SERIAL_DEBUG_OTHER @@ -1698,7 +1698,7 @@ static void cy_close(struct tty_struct *tty, struct file *filp) */ void cy_hangup(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; #ifdef SERIAL_DEBUG_OTHER printk("cy_hangup %s\n", tty->name); /* */ diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index a16b94f12eb2..3c67c3d83de9 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -1450,7 +1450,7 @@ static int sx_open(struct tty_struct *tty, struct file *filp) static void sx_flush_buffer(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; unsigned long flags; struct specialix_board *bp; @@ -1472,7 +1472,7 @@ static void sx_flush_buffer(struct tty_struct *tty) static void sx_close(struct tty_struct *tty, struct file *filp) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; unsigned long timeout; @@ -1585,7 +1585,7 @@ static void sx_close(struct tty_struct *tty, struct file *filp) static int sx_write(struct tty_struct *tty, const unsigned char *buf, int count) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; int c, total = 0; unsigned long flags; @@ -1637,7 +1637,7 @@ static int sx_write(struct tty_struct *tty, static int sx_put_char(struct tty_struct *tty, unsigned char ch) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; unsigned long flags; struct specialix_board *bp; @@ -1676,7 +1676,7 @@ static int sx_put_char(struct tty_struct *tty, unsigned char ch) static void sx_flush_chars(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; unsigned long flags; struct specialix_board *bp = port_Board(port); @@ -1703,7 +1703,7 @@ static void sx_flush_chars(struct tty_struct *tty) static int sx_write_room(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; int ret; func_enter(); @@ -1724,7 +1724,7 @@ static int sx_write_room(struct tty_struct *tty) static int sx_chars_in_buffer(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; func_enter(); @@ -1738,7 +1738,7 @@ static int sx_chars_in_buffer(struct tty_struct *tty) static int sx_tiocmget(struct tty_struct *tty, struct file *file) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned char status; unsigned int result; @@ -1780,7 +1780,7 @@ static int sx_tiocmget(struct tty_struct *tty, struct file *file) static int sx_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; unsigned long flags; struct specialix_board *bp; @@ -1820,7 +1820,7 @@ static int sx_tiocmset(struct tty_struct *tty, struct file *file, static int sx_send_break(struct tty_struct *tty, int length) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp = port_Board(port); unsigned long flags; @@ -1931,7 +1931,7 @@ static int sx_get_serial_info(struct specialix_port *port, static int sx_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, unsigned long arg) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; void __user *argp = (void __user *)arg; func_enter(); @@ -1959,7 +1959,7 @@ static int sx_ioctl(struct tty_struct *tty, struct file *filp, static void sx_throttle(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; @@ -2004,7 +2004,7 @@ static void sx_throttle(struct tty_struct *tty) static void sx_unthrottle(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; @@ -2045,7 +2045,7 @@ static void sx_unthrottle(struct tty_struct *tty) static void sx_stop(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; @@ -2072,7 +2072,7 @@ static void sx_stop(struct tty_struct *tty) static void sx_start(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; @@ -2100,7 +2100,7 @@ static void sx_start(struct tty_struct *tty) static void sx_hangup(struct tty_struct *tty) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; struct specialix_board *bp; unsigned long flags; @@ -2135,7 +2135,7 @@ static void sx_hangup(struct tty_struct *tty) static void sx_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct specialix_port *port = (struct specialix_port *)tty->driver_data; + struct specialix_port *port = tty->driver_data; unsigned long flags; struct specialix_board *bp; diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index 963b03fb29e5..e1e0dd89ac9a 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -130,6 +130,8 @@ static char stl_unwanted[SC26198_RXFIFOSIZE]; static DEFINE_MUTEX(stl_brdslock); static struct stlbrd *stl_brds[STL_MAXBRDS]; +static const struct tty_port_operations stl_port_ops; + /* * Per board state flags. Used with the state field of the board struct. * Not really much here! @@ -407,7 +409,6 @@ static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, uns static int stl_brdinit(struct stlbrd *brdp); static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comstats_t __user *cp); static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp); -static int stl_waitcarrier(struct tty_struct *tty, struct stlport *portp, struct file *filp); /* * CD1400 uart specific handling functions. @@ -703,8 +704,9 @@ static int stl_open(struct tty_struct *tty, struct file *filp) { struct stlport *portp; struct stlbrd *brdp; + struct tty_port *port; unsigned int minordev, brdnr, panelnr; - int portnr, rc; + int portnr; pr_debug("stl_open(tty=%p,filp=%p): device=%s\n", tty, filp, tty->name); @@ -715,6 +717,7 @@ static int stl_open(struct tty_struct *tty, struct file *filp) brdp = stl_brds[brdnr]; if (brdp == NULL) return -ENODEV; + minordev = MINOR2PORT(minordev); for (portnr = -1, panelnr = 0; panelnr < STL_MAXPANELS; panelnr++) { if (brdp->panels[panelnr] == NULL) @@ -731,16 +734,17 @@ static int stl_open(struct tty_struct *tty, struct file *filp) portp = brdp->panels[panelnr]->ports[portnr]; if (portp == NULL) return -ENODEV; + port = &portp->port; /* * On the first open of the device setup the port hardware, and * initialize the per port data structure. */ - tty_port_tty_set(&portp->port, tty); + tty_port_tty_set(port, tty); tty->driver_data = portp; - portp->port.count++; + port->count++; - if ((portp->port.flags & ASYNC_INITIALIZED) == 0) { + if ((port->flags & ASYNC_INITIALIZED) == 0) { if (!portp->tx.buf) { portp->tx.buf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL); if (!portp->tx.buf) @@ -754,91 +758,24 @@ static int stl_open(struct tty_struct *tty, struct file *filp) stl_enablerxtx(portp, 1, 1); stl_startrxtx(portp, 1, 0); clear_bit(TTY_IO_ERROR, &tty->flags); - portp->port.flags |= ASYNC_INITIALIZED; - } - -/* - * Check if this port is in the middle of closing. If so then wait - * until it is closed then return error status, based on flag settings. - * The sleep here does not need interrupt protection since the wakeup - * for it is done with the same context. - */ - if (portp->port.flags & ASYNC_CLOSING) { - interruptible_sleep_on(&portp->port.close_wait); - if (portp->port.flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - return -ERESTARTSYS; + port->flags |= ASYNC_INITIALIZED; } - -/* - * Based on type of open being done check if it can overlap with any - * previous opens still in effect. If we are a normal serial device - * then also we might have to wait for carrier. - */ - if (!(filp->f_flags & O_NONBLOCK)) - if ((rc = stl_waitcarrier(tty, portp, filp)) != 0) - return rc; - - portp->port.flags |= ASYNC_NORMAL_ACTIVE; - - return 0; + return tty_port_block_til_ready(port, tty, filp); } /*****************************************************************************/ -/* - * Possibly need to wait for carrier (DCD signal) to come high. Say - * maybe because if we are clocal then we don't need to wait... - */ - -static int stl_waitcarrier(struct tty_struct *tty, struct stlport *portp, - struct file *filp) +static int stl_carrier_raised(struct tty_port *port) { - unsigned long flags; - int rc, doclocal; - - pr_debug("stl_waitcarrier(portp=%p,filp=%p)\n", portp, filp); - - rc = 0; - doclocal = 0; - - spin_lock_irqsave(&stallion_lock, flags); - - if (tty->termios->c_cflag & CLOCAL) - doclocal++; - - portp->openwaitcnt++; - if (! tty_hung_up_p(filp)) - portp->port.count--; - - for (;;) { - /* Takes brd_lock internally */ - stl_setsignals(portp, 1, 1); - if (tty_hung_up_p(filp) || - ((portp->port.flags & ASYNC_INITIALIZED) == 0)) { - if (portp->port.flags & ASYNC_HUP_NOTIFY) - rc = -EBUSY; - else - rc = -ERESTARTSYS; - break; - } - if (((portp->port.flags & ASYNC_CLOSING) == 0) && - (doclocal || (portp->sigs & TIOCM_CD))) - break; - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - /* FIXME */ - interruptible_sleep_on(&portp->port.open_wait); - } - - if (! tty_hung_up_p(filp)) - portp->port.count++; - portp->openwaitcnt--; - spin_unlock_irqrestore(&stallion_lock, flags); + struct stlport *portp = container_of(port, struct stlport, port); + return (portp->sigs & TIOCM_CD) ? 1 : 0; +} - return rc; +static void stl_raise_dtr_rts(struct tty_port *port) +{ + struct stlport *portp = container_of(port, struct stlport, port); + /* Takes brd_lock internally */ + stl_setsignals(portp, 1, 1); } /*****************************************************************************/ @@ -890,47 +827,29 @@ static void stl_waituntilsent(struct tty_struct *tty, int timeout) static void stl_close(struct tty_struct *tty, struct file *filp) { struct stlport *portp; + struct tty_port *port; unsigned long flags; pr_debug("stl_close(tty=%p,filp=%p)\n", tty, filp); portp = tty->driver_data; - if (portp == NULL) - return; + BUG_ON(portp == NULL); - spin_lock_irqsave(&stallion_lock, flags); - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&stallion_lock, flags); - return; - } - if ((tty->count == 1) && (portp->port.count != 1)) - portp->port.count = 1; - if (portp->port.count-- > 1) { - spin_unlock_irqrestore(&stallion_lock, flags); - return; - } - - portp->port.count = 0; - portp->port.flags |= ASYNC_CLOSING; + port = &portp->port; + if (tty_port_close_start(port, tty, filp) == 0) + return; /* * May want to wait for any data to drain before closing. The BUSY * flag keeps track of whether we are still sending or not - it is * very accurate for the cd1400, not quite so for the sc26198. * (The sc26198 has no "end-of-data" interrupt only empty FIFO) */ - tty->closing = 1; - - spin_unlock_irqrestore(&stallion_lock, flags); - - if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, portp->closing_wait); stl_waituntilsent(tty, (HZ / 2)); - - spin_lock_irqsave(&stallion_lock, flags); + spin_lock_irqsave(&port->lock, flags); portp->port.flags &= ~ASYNC_INITIALIZED; - spin_unlock_irqrestore(&stallion_lock, flags); + spin_unlock_irqrestore(&port->lock, flags); stl_disableintrs(portp); if (tty->termios->c_cflag & HUPCL) @@ -944,20 +863,9 @@ static void stl_close(struct tty_struct *tty, struct file *filp) portp->tx.head = NULL; portp->tx.tail = NULL; } - set_bit(TTY_IO_ERROR, &tty->flags); - tty_ldisc_flush(tty); - tty->closing = 0; - tty_port_tty_set(&portp->port, NULL); - - if (portp->openwaitcnt) { - if (portp->close_delay) - msleep_interruptible(jiffies_to_msecs(portp->close_delay)); - wake_up_interruptible(&portp->port.open_wait); - } - - portp->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&portp->port.close_wait); + tty_port_close_end(port, tty); + tty_port_tty_set(port, NULL); } /*****************************************************************************/ @@ -1405,14 +1313,20 @@ static void stl_stop(struct tty_struct *tty) static void stl_hangup(struct tty_struct *tty) { struct stlport *portp; + struct tty_port *port; + unsigned long flags; pr_debug("stl_hangup(tty=%p)\n", tty); portp = tty->driver_data; if (portp == NULL) return; + port = &portp->port; + + spin_lock_irqsave(&port->lock, flags); + port->flags &= ~ASYNC_INITIALIZED; + spin_unlock_irqrestore(&port->lock, flags); - portp->port.flags &= ~ASYNC_INITIALIZED; stl_disableintrs(portp); if (tty->termios->c_cflag & HUPCL) stl_setsignals(portp, 0, 0); @@ -1426,10 +1340,7 @@ static void stl_hangup(struct tty_struct *tty) portp->tx.head = NULL; portp->tx.tail = NULL; } - tty_port_tty_set(&portp->port, NULL); - portp->port.flags &= ~ASYNC_NORMAL_ACTIVE; - portp->port.count = 0; - wake_up_interruptible(&portp->port.open_wait); + tty_port_hangup(port); } /*****************************************************************************/ @@ -1776,6 +1687,7 @@ static int __devinit stl_initports(struct stlbrd *brdp, struct stlpanel *panelp) break; } tty_port_init(&portp->port); + portp->port.ops = &stl_port_ops; portp->magic = STL_PORTMAGIC; portp->portnr = i; portp->brdnr = panelp->brdnr; @@ -2659,6 +2571,11 @@ static const struct tty_operations stl_ops = { .tiocmset = stl_tiocmset, }; +static const struct tty_port_operations stl_port_ops = { + .carrier_raised = stl_carrier_raised, + .raise_dtr_rts = stl_raise_dtr_rts, +}; + /*****************************************************************************/ /* CD1400 HARDWARE FUNCTIONS */ /*****************************************************************************/ diff --git a/drivers/char/sx.c b/drivers/char/sx.c index ba4e86281fbf..b60be7b0decf 100644 --- a/drivers/char/sx.c +++ b/drivers/char/sx.c @@ -279,7 +279,7 @@ static void sx_disable_tx_interrupts(void *ptr); static void sx_enable_tx_interrupts(void *ptr); static void sx_disable_rx_interrupts(void *ptr); static void sx_enable_rx_interrupts(void *ptr); -static int sx_get_CD(void *ptr); +static int sx_carrier_raised(struct tty_port *port); static void sx_shutdown_port(void *ptr); static int sx_set_real_termios(void *ptr); static void sx_close(void *ptr); @@ -360,7 +360,6 @@ static struct real_driver sx_real_driver = { sx_enable_tx_interrupts, sx_disable_rx_interrupts, sx_enable_rx_interrupts, - sx_get_CD, sx_shutdown_port, sx_set_real_termios, sx_chars_in_buffer, @@ -791,7 +790,7 @@ static int sx_getsignals(struct sx_port *port) sx_dprintk(SX_DEBUG_MODEMSIGNALS, "getsignals: %d/%d (%d/%d) " "%02x/%02x\n", (o_stat & OP_DTR) != 0, (o_stat & OP_RTS) != 0, - port->c_dcd, sx_get_CD(port), + port->c_dcd, tty_port_carrier_raised(&port->gs.port), sx_read_channel_byte(port, hi_ip), sx_read_channel_byte(port, hi_state)); @@ -1190,7 +1189,7 @@ static inline void sx_check_modem_signals(struct sx_port *port) hi_state = sx_read_channel_byte(port, hi_state); sx_dprintk(SX_DEBUG_MODEMSIGNALS, "Checking modem signals (%d/%d)\n", - port->c_dcd, sx_get_CD(port)); + port->c_dcd, tty_port_carrier_raised(&port->gs.port)); if (hi_state & ST_BREAK) { hi_state &= ~ST_BREAK; @@ -1202,11 +1201,11 @@ static inline void sx_check_modem_signals(struct sx_port *port) hi_state &= ~ST_DCD; sx_dprintk(SX_DEBUG_MODEMSIGNALS, "got a DCD change.\n"); sx_write_channel_byte(port, hi_state, hi_state); - c_dcd = sx_get_CD(port); + c_dcd = tty_port_carrier_raised(&port->gs.port); sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD is now %d\n", c_dcd); if (c_dcd != port->c_dcd) { port->c_dcd = c_dcd; - if (sx_get_CD(port)) { + if (tty_port_carrier_raised(&port->gs.port)) { /* DCD went UP */ if ((sx_read_channel_byte(port, hi_hstat) != HS_IDLE_CLOSED) && @@ -1415,13 +1414,10 @@ static void sx_enable_rx_interrupts(void *ptr) } /* Jeez. Isn't this simple? */ -static int sx_get_CD(void *ptr) +static int sx_carrier_raised(struct tty_port *port) { - struct sx_port *port = ptr; - func_enter2(); - - func_exit(); - return ((sx_read_channel_byte(port, hi_ip) & IP_DCD) != 0); + struct sx_port *sp = container_of(port, struct sx_port, gs.port); + return ((sx_read_channel_byte(sp, hi_ip) & IP_DCD) != 0); } /* Jeez. Isn't this simple? */ @@ -1536,7 +1532,7 @@ static int sx_open(struct tty_struct *tty, struct file *filp) } /* tty->low_latency = 1; */ - port->c_dcd = sx_get_CD(port); + port->c_dcd = sx_carrier_raised(&port->gs.port); sx_dprintk(SX_DEBUG_OPEN, "at open: cd=%d\n", port->c_dcd); func_exit(); @@ -1945,7 +1941,7 @@ static int sx_ioctl(struct tty_struct *tty, struct file *filp, static void sx_throttle(struct tty_struct *tty) { - struct sx_port *port = (struct sx_port *)tty->driver_data; + struct sx_port *port = tty->driver_data; func_enter2(); /* If the port is using any type of input flow @@ -1959,7 +1955,7 @@ static void sx_throttle(struct tty_struct *tty) static void sx_unthrottle(struct tty_struct *tty) { - struct sx_port *port = (struct sx_port *)tty->driver_data; + struct sx_port *port = tty->driver_data; func_enter2(); /* Always unthrottle even if flow control is not enabled on @@ -2354,6 +2350,10 @@ static const struct tty_operations sx_ops = { .tiocmset = sx_tiocmset, }; +static const struct tty_port_operations sx_port_ops = { + .carrier_raised = sx_carrier_raised, +}; + static int sx_init_drivers(void) { int error; @@ -2410,6 +2410,7 @@ static int sx_init_portstructs(int nboards, int nports) for (j = 0; j < boards[i].nports; j++) { sx_dprintk(SX_DEBUG_INIT, "initing port %d\n", j); tty_port_init(&port->gs.port); + port->gs.port.ops = &sx_port_ops; port->gs.magic = SX_MAGIC; port->gs.close_delay = HZ / 2; port->gs.closing_wait = 30 * HZ; diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index 500f5176b6ba..b8063d4cad32 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -977,7 +977,7 @@ static void ldisc_receive_buf(struct tty_struct *tty, */ static void mgsl_stop(struct tty_struct *tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (mgsl_paranoia_check(info, tty->name, "mgsl_stop")) @@ -1000,7 +1000,7 @@ static void mgsl_stop(struct tty_struct *tty) */ static void mgsl_start(struct tty_struct *tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (mgsl_paranoia_check(info, tty->name, "mgsl_start")) @@ -2057,7 +2057,7 @@ static int mgsl_put_char(struct tty_struct *tty, unsigned char ch) */ static void mgsl_flush_chars(struct tty_struct *tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if ( debug_level >= DEBUG_LEVEL_INFO ) @@ -2109,7 +2109,7 @@ static int mgsl_write(struct tty_struct * tty, const unsigned char *buf, int count) { int c, ret = 0; - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if ( debug_level >= DEBUG_LEVEL_INFO ) @@ -2232,7 +2232,7 @@ cleanup: */ static int mgsl_write_room(struct tty_struct *tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; int ret; if (mgsl_paranoia_check(info, tty->name, "mgsl_write_room")) @@ -2267,7 +2267,7 @@ static int mgsl_write_room(struct tty_struct *tty) */ static int mgsl_chars_in_buffer(struct tty_struct *tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgsl_chars_in_buffer(%s)\n", @@ -2301,7 +2301,7 @@ static int mgsl_chars_in_buffer(struct tty_struct *tty) */ static void mgsl_flush_buffer(struct tty_struct *tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -2329,7 +2329,7 @@ static void mgsl_flush_buffer(struct tty_struct *tty) */ static void mgsl_send_xchar(struct tty_struct *tty, char ch) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -2358,7 +2358,7 @@ static void mgsl_send_xchar(struct tty_struct *tty, char ch) */ static void mgsl_throttle(struct tty_struct * tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -2388,7 +2388,7 @@ static void mgsl_throttle(struct tty_struct * tty) */ static void mgsl_unthrottle(struct tty_struct * tty) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -2841,7 +2841,7 @@ static int modem_input_wait(struct mgsl_struct *info,int arg) */ static int tiocmget(struct tty_struct *tty, struct file *file) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned int result; unsigned long flags; @@ -2867,7 +2867,7 @@ static int tiocmget(struct tty_struct *tty, struct file *file) static int tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -2898,7 +2898,7 @@ static int tiocmset(struct tty_struct *tty, struct file *file, */ static int mgsl_break(struct tty_struct *tty, int break_state) { - struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct * info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -2932,7 +2932,7 @@ static int mgsl_break(struct tty_struct *tty, int break_state) static int mgsl_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) { - struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct * info = tty->driver_data; int ret; if (debug_level >= DEBUG_LEVEL_INFO) @@ -3042,7 +3042,7 @@ static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigne */ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -3096,7 +3096,7 @@ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termio */ static void mgsl_close(struct tty_struct *tty, struct file * filp) { - struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct * info = tty->driver_data; if (mgsl_paranoia_check(info, tty->name, "mgsl_close")) return; @@ -3104,70 +3104,18 @@ static void mgsl_close(struct tty_struct *tty, struct file * filp) if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgsl_close(%s) entry, count=%d\n", __FILE__,__LINE__, info->device_name, info->port.count); - - if (!info->port.count) - return; - if (tty_hung_up_p(filp)) + if (tty_port_close_start(&info->port, tty, filp) == 0) goto cleanup; - if ((tty->count == 1) && (info->port.count != 1)) { - /* - * tty->count is 1 and the tty structure will be freed. - * info->port.count should be one in this case. - * if it's not, correct it so that the port is shutdown. - */ - printk("mgsl_close: bad refcount; tty->count is 1, " - "info->port.count is %d\n", info->port.count); - info->port.count = 1; - } - - info->port.count--; - - /* if at least one open remaining, leave hardware active */ - if (info->port.count) - goto cleanup; - - info->port.flags |= ASYNC_CLOSING; - - /* set tty->closing to notify line discipline to - * only process XON/XOFF characters. Only the N_TTY - * discipline appears to use this (ppp does not). - */ - tty->closing = 1; - - /* wait for transmit data to clear all layers */ - - if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) { - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_close(%s) calling tty_wait_until_sent\n", - __FILE__,__LINE__, info->device_name ); - tty_wait_until_sent(tty, info->port.closing_wait); - } - if (info->port.flags & ASYNC_INITIALIZED) mgsl_wait_until_sent(tty, info->timeout); - mgsl_flush_buffer(tty); - tty_ldisc_flush(tty); - shutdown(info); - - tty->closing = 0; + + tty_port_close_end(&info->port, tty); info->port.tty = NULL; - - if (info->port.blocked_open) { - if (info->port.close_delay) { - msleep_interruptible(jiffies_to_msecs(info->port.close_delay)); - } - wake_up_interruptible(&info->port.open_wait); - } - - info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - - wake_up_interruptible(&info->port.close_wait); - cleanup: if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__, @@ -3188,7 +3136,7 @@ cleanup: */ static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout) { - struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct * info = tty->driver_data; unsigned long orig_jiffies, char_time; if (!info ) @@ -3261,7 +3209,7 @@ exit: */ static void mgsl_hangup(struct tty_struct *tty) { - struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data; + struct mgsl_struct * info = tty->driver_data; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgsl_hangup(%s)\n", @@ -3281,6 +3229,35 @@ static void mgsl_hangup(struct tty_struct *tty) } /* end of mgsl_hangup() */ +/* + * carrier_raised() + * + * Return true if carrier is raised + */ + +static int carrier_raised(struct tty_port *port) +{ + unsigned long flags; + struct mgsl_struct *info = container_of(port, struct mgsl_struct, port); + + spin_lock_irqsave(&info->irq_spinlock, flags); + usc_get_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock, flags); + return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; +} + +static void raise_dtr_rts(struct tty_port *port) +{ + struct mgsl_struct *info = container_of(port, struct mgsl_struct, port); + unsigned long flags; + + spin_lock_irqsave(&info->irq_spinlock,flags); + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + usc_set_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); +} + + /* block_til_ready() * * Block the current process until the specified port @@ -3302,6 +3279,8 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, bool do_clocal = false; bool extra_count = false; unsigned long flags; + int dcd; + struct tty_port *port = &info->port; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):block_til_ready on %s\n", @@ -3309,7 +3288,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ /* nonblock mode is set or port is not enabled */ - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -3318,50 +3297,42 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, /* Wait for carrier detect and the line to become * free (i.e., not in use by the callout). While we are in - * this loop, info->port.count is dropped by one, so that + * this loop, port->count is dropped by one, so that * mgsl_close() knows when to free things. We restore it upon * exit, either normal or abnormal. */ retval = 0; - add_wait_queue(&info->port.open_wait, &wait); + add_wait_queue(&port->open_wait, &wait); if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):block_til_ready before block on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->port.count ); + __FILE__,__LINE__, tty->driver->name, port->count ); spin_lock_irqsave(&info->irq_spinlock, flags); if (!tty_hung_up_p(filp)) { extra_count = true; - info->port.count--; + port->count--; } spin_unlock_irqrestore(&info->irq_spinlock, flags); - info->port.blocked_open++; + port->blocked_open++; while (1) { - if (tty->termios->c_cflag & CBAUD) { - spin_lock_irqsave(&info->irq_spinlock,flags); - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; - usc_set_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } + if (tty->termios->c_cflag & CBAUD) + tty_port_raise_dtr_rts(port); set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(info->port.flags & ASYNC_INITIALIZED)){ - retval = (info->port.flags & ASYNC_HUP_NOTIFY) ? + if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){ + retval = (port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS; break; } - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_get_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); + dcd = tty_port_carrier_raised(&info->port); - if (!(info->port.flags & ASYNC_CLOSING) && - (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) { + if (!(port->flags & ASYNC_CLOSING) && (do_clocal || dcd)) break; - } if (signal_pending(current)) { retval = -ERESTARTSYS; @@ -3370,24 +3341,25 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):block_til_ready blocking on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->port.count ); + __FILE__,__LINE__, tty->driver->name, port->count ); schedule(); } set_current_state(TASK_RUNNING); - remove_wait_queue(&info->port.open_wait, &wait); + remove_wait_queue(&port->open_wait, &wait); + /* FIXME: Racy on hangup during close wait */ if (extra_count) - info->port.count++; - info->port.blocked_open--; + port->count++; + port->blocked_open--; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):block_til_ready after blocking on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->port.count ); + __FILE__,__LINE__, tty->driver->name, port->count ); if (!retval) - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return retval; @@ -4304,6 +4276,12 @@ static void mgsl_add_device( struct mgsl_struct *info ) } /* end of mgsl_add_device() */ +static const struct tty_port_operations mgsl_port_ops = { + .carrier_raised = carrier_raised, + .raise_dtr_rts = raise_dtr_rts, +}; + + /* mgsl_allocate_device() * * Allocate and initialize a device instance structure @@ -4322,6 +4300,7 @@ static struct mgsl_struct* mgsl_allocate_device(void) printk("Error can't allocate device instance data\n"); } else { tty_port_init(&info->port); + info->port.ops = &mgsl_port_ops; info->magic = MGSL_MAGIC; INIT_WORK(&info->task, mgsl_bh_handler); info->max_frame_size = 4096; diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 08911ed66494..53544e21f191 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -720,44 +720,9 @@ static void close(struct tty_struct *tty, struct file *filp) return; DBGINFO(("%s close entry, count=%d\n", info->device_name, info->port.count)); - if (!info->port.count) - return; - - if (tty_hung_up_p(filp)) - goto cleanup; - - if ((tty->count == 1) && (info->port.count != 1)) { - /* - * tty->count is 1 and the tty structure will be freed. - * info->port.count should be one in this case. - * if it's not, correct it so that the port is shutdown. - */ - DBGERR(("%s close: bad refcount; tty->count=1, " - "info->port.count=%d\n", info->device_name, info->port.count)); - info->port.count = 1; - } - - info->port.count--; - - /* if at least one open remaining, leave hardware active */ - if (info->port.count) + if (tty_port_close_start(&info->port, tty, filp) == 0) goto cleanup; - info->port.flags |= ASYNC_CLOSING; - - /* set tty->closing to notify line discipline to - * only process XON/XOFF characters. Only the N_TTY - * discipline appears to use this (ppp does not). - */ - tty->closing = 1; - - /* wait for transmit data to clear all layers */ - - if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) { - DBGINFO(("%s call tty_wait_until_sent\n", info->device_name)); - tty_wait_until_sent(tty, info->port.closing_wait); - } - if (info->port.flags & ASYNC_INITIALIZED) wait_until_sent(tty, info->timeout); flush_buffer(tty); @@ -765,20 +730,8 @@ static void close(struct tty_struct *tty, struct file *filp) shutdown(info); - tty->closing = 0; + tty_port_close_end(&info->port, tty); info->port.tty = NULL; - - if (info->port.blocked_open) { - if (info->port.close_delay) { - msleep_interruptible(jiffies_to_msecs(info->port.close_delay)); - } - wake_up_interruptible(&info->port.open_wait); - } - - info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - - wake_up_interruptible(&info->port.close_wait); - cleanup: DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->port.count)); } @@ -3132,6 +3085,29 @@ static int tiocmset(struct tty_struct *tty, struct file *file, return 0; } +static int carrier_raised(struct tty_port *port) +{ + unsigned long flags; + struct slgt_info *info = container_of(port, struct slgt_info, port); + + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + return (info->signals & SerialSignal_DCD) ? 1 : 0; +} + +static void raise_dtr_rts(struct tty_port *port) +{ + unsigned long flags; + struct slgt_info *info = container_of(port, struct slgt_info, port); + + spin_lock_irqsave(&info->lock,flags); + info->signals |= SerialSignal_RTS + SerialSignal_DTR; + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); +} + + /* * block current process until the device is ready to open */ @@ -3143,12 +3119,14 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, bool do_clocal = false; bool extra_count = false; unsigned long flags; + int cd; + struct tty_port *port = &info->port; DBGINFO(("%s block_til_ready\n", tty->driver->name)); if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ /* nonblock mode is set or port is not enabled */ - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -3157,46 +3135,38 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, /* Wait for carrier detect and the line to become * free (i.e., not in use by the callout). While we are in - * this loop, info->port.count is dropped by one, so that + * this loop, port->count is dropped by one, so that * close() knows when to free things. We restore it upon * exit, either normal or abnormal. */ retval = 0; - add_wait_queue(&info->port.open_wait, &wait); + add_wait_queue(&port->open_wait, &wait); spin_lock_irqsave(&info->lock, flags); if (!tty_hung_up_p(filp)) { extra_count = true; - info->port.count--; + port->count--; } spin_unlock_irqrestore(&info->lock, flags); - info->port.blocked_open++; + port->blocked_open++; while (1) { - if ((tty->termios->c_cflag & CBAUD)) { - spin_lock_irqsave(&info->lock,flags); - info->signals |= SerialSignal_RTS + SerialSignal_DTR; - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } + if ((tty->termios->c_cflag & CBAUD)) + tty_port_raise_dtr_rts(port); set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(info->port.flags & ASYNC_INITIALIZED)){ - retval = (info->port.flags & ASYNC_HUP_NOTIFY) ? + if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){ + retval = (port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS; break; } - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); + cd = tty_port_carrier_raised(port); - if (!(info->port.flags & ASYNC_CLOSING) && - (do_clocal || (info->signals & SerialSignal_DCD)) ) { + if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd )) break; - } if (signal_pending(current)) { retval = -ERESTARTSYS; @@ -3208,14 +3178,14 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, } set_current_state(TASK_RUNNING); - remove_wait_queue(&info->port.open_wait, &wait); + remove_wait_queue(&port->open_wait, &wait); if (extra_count) - info->port.count++; - info->port.blocked_open--; + port->count++; + port->blocked_open--; if (!retval) - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval)); return retval; @@ -3444,6 +3414,11 @@ static void add_device(struct slgt_info *info) #endif } +static const struct tty_port_operations slgt_port_ops = { + .carrier_raised = carrier_raised, + .raise_dtr_rts = raise_dtr_rts, +}; + /* * allocate device instance structure, return NULL on failure */ @@ -3458,6 +3433,7 @@ static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev driver_name, adapter_num, port_num)); } else { tty_port_init(&info->port); + info->port.ops = &slgt_port_ops; info->magic = MGSL_MAGIC; INIT_WORK(&info->task, bh_handler); info->max_frame_size = 4096; diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c index 6bdb44f7bec2..7b0c5b2dd263 100644 --- a/drivers/char/synclinkmp.c +++ b/drivers/char/synclinkmp.c @@ -558,6 +558,7 @@ static void release_resources(SLMP_INFO *info); static int startup(SLMP_INFO *info); static int block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info); +static int carrier_raised(struct tty_port *port); static void shutdown(SLMP_INFO *info); static void program_hw(SLMP_INFO *info); static void change_params(SLMP_INFO *info); @@ -800,7 +801,7 @@ cleanup: */ static void close(struct tty_struct *tty, struct file *filp) { - SLMP_INFO * info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO * info = tty->driver_data; if (sanity_check(info, tty->name, "close")) return; @@ -809,70 +810,18 @@ static void close(struct tty_struct *tty, struct file *filp) printk("%s(%d):%s close() entry, count=%d\n", __FILE__,__LINE__, info->device_name, info->port.count); - if (!info->port.count) - return; - - if (tty_hung_up_p(filp)) - goto cleanup; - - if ((tty->count == 1) && (info->port.count != 1)) { - /* - * tty->count is 1 and the tty structure will be freed. - * info->port.count should be one in this case. - * if it's not, correct it so that the port is shutdown. - */ - printk("%s(%d):%s close: bad refcount; tty->count is 1, " - "info->port.count is %d\n", - __FILE__,__LINE__, info->device_name, info->port.count); - info->port.count = 1; - } - - info->port.count--; - - /* if at least one open remaining, leave hardware active */ - if (info->port.count) + if (tty_port_close_start(&info->port, tty, filp) == 0) goto cleanup; - - info->port.flags |= ASYNC_CLOSING; - - /* set tty->closing to notify line discipline to - * only process XON/XOFF characters. Only the N_TTY - * discipline appears to use this (ppp does not). - */ - tty->closing = 1; - - /* wait for transmit data to clear all layers */ - - if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) { - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s close() calling tty_wait_until_sent\n", - __FILE__,__LINE__, info->device_name ); - tty_wait_until_sent(tty, info->port.closing_wait); - } - + if (info->port.flags & ASYNC_INITIALIZED) wait_until_sent(tty, info->timeout); flush_buffer(tty); - tty_ldisc_flush(tty); - shutdown(info); - tty->closing = 0; + tty_port_close_end(&info->port, tty); info->port.tty = NULL; - - if (info->port.blocked_open) { - if (info->port.close_delay) { - msleep_interruptible(jiffies_to_msecs(info->port.close_delay)); - } - wake_up_interruptible(&info->port.open_wait); - } - - info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - - wake_up_interruptible(&info->port.close_wait); - cleanup: if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__, @@ -884,7 +833,7 @@ cleanup: */ static void hangup(struct tty_struct *tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s hangup()\n", @@ -907,7 +856,7 @@ static void hangup(struct tty_struct *tty) */ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -960,7 +909,7 @@ static int write(struct tty_struct *tty, const unsigned char *buf, int count) { int c, ret = 0; - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -1038,7 +987,7 @@ cleanup: */ static int put_char(struct tty_struct *tty, unsigned char ch) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; int ret = 0; @@ -1075,7 +1024,7 @@ static int put_char(struct tty_struct *tty, unsigned char ch) */ static void send_xchar(struct tty_struct *tty, char ch) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -1099,7 +1048,7 @@ static void send_xchar(struct tty_struct *tty, char ch) */ static void wait_until_sent(struct tty_struct *tty, int timeout) { - SLMP_INFO * info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO * info = tty->driver_data; unsigned long orig_jiffies, char_time; if (!info ) @@ -1166,7 +1115,7 @@ exit: */ static int write_room(struct tty_struct *tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; int ret; if (sanity_check(info, tty->name, "write_room")) @@ -1193,7 +1142,7 @@ static int write_room(struct tty_struct *tty) */ static void flush_chars(struct tty_struct *tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if ( debug_level >= DEBUG_LEVEL_INFO ) @@ -1232,7 +1181,7 @@ static void flush_chars(struct tty_struct *tty) */ static void flush_buffer(struct tty_struct *tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -1254,7 +1203,7 @@ static void flush_buffer(struct tty_struct *tty) */ static void tx_hold(struct tty_struct *tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (sanity_check(info, tty->name, "tx_hold")) @@ -1274,7 +1223,7 @@ static void tx_hold(struct tty_struct *tty) */ static void tx_release(struct tty_struct *tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (sanity_check(info, tty->name, "tx_release")) @@ -1304,7 +1253,7 @@ static void tx_release(struct tty_struct *tty) static int do_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; int error; struct mgsl_icount cnow; /* kernel counter temps */ struct serial_icounter_struct __user *p_cuser; /* user space */ @@ -1515,7 +1464,7 @@ done: */ static int chars_in_buffer(struct tty_struct *tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; if (sanity_check(info, tty->name, "chars_in_buffer")) return 0; @@ -1531,7 +1480,7 @@ static int chars_in_buffer(struct tty_struct *tty) */ static void throttle(struct tty_struct * tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -1556,7 +1505,7 @@ static void throttle(struct tty_struct * tty) */ static void unthrottle(struct tty_struct * tty) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -1587,7 +1536,7 @@ static void unthrottle(struct tty_struct * tty) static int set_break(struct tty_struct *tty, int break_state) { unsigned char RegValue; - SLMP_INFO * info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO * info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -3269,7 +3218,7 @@ static int modem_input_wait(SLMP_INFO *info,int arg) */ static int tiocmget(struct tty_struct *tty, struct file *file) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned int result; unsigned long flags; @@ -3295,7 +3244,7 @@ static int tiocmget(struct tty_struct *tty, struct file *file) static int tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - SLMP_INFO *info = (SLMP_INFO *)tty->driver_data; + SLMP_INFO *info = tty->driver_data; unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) @@ -3318,7 +3267,28 @@ static int tiocmset(struct tty_struct *tty, struct file *file, return 0; } +static int carrier_raised(struct tty_port *port) +{ + SLMP_INFO *info = container_of(port, SLMP_INFO, port); + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; +} + +static void raise_dtr_rts(struct tty_port *port) +{ + SLMP_INFO *info = container_of(port, SLMP_INFO, port); + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); +} /* Block the current process until the specified port is ready to open. */ @@ -3330,6 +3300,8 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, bool do_clocal = false; bool extra_count = false; unsigned long flags; + int cd; + struct tty_port *port = &info->port; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s block_til_ready()\n", @@ -3338,7 +3310,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ /* nonblock mode is set or port is not enabled */ /* just verify that callout device is not active */ - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -3347,50 +3319,42 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, /* Wait for carrier detect and the line to become * free (i.e., not in use by the callout). While we are in - * this loop, info->port.count is dropped by one, so that + * this loop, port->count is dropped by one, so that * close() knows when to free things. We restore it upon * exit, either normal or abnormal. */ retval = 0; - add_wait_queue(&info->port.open_wait, &wait); + add_wait_queue(&port->open_wait, &wait); if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s block_til_ready() before block, count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->port.count ); + __FILE__,__LINE__, tty->driver->name, port->count ); spin_lock_irqsave(&info->lock, flags); if (!tty_hung_up_p(filp)) { extra_count = true; - info->port.count--; + port->count--; } spin_unlock_irqrestore(&info->lock, flags); - info->port.blocked_open++; + port->blocked_open++; while (1) { - if ((tty->termios->c_cflag & CBAUD)) { - spin_lock_irqsave(&info->lock,flags); - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } + if (tty->termios->c_cflag & CBAUD) + tty_port_raise_dtr_rts(port); set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(info->port.flags & ASYNC_INITIALIZED)){ - retval = (info->port.flags & ASYNC_HUP_NOTIFY) ? + if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){ + retval = (port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS; break; } - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); + cd = tty_port_carrier_raised(port); - if (!(info->port.flags & ASYNC_CLOSING) && - (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) { + if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd)) break; - } if (signal_pending(current)) { retval = -ERESTARTSYS; @@ -3399,24 +3363,24 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s block_til_ready() count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->port.count ); + __FILE__,__LINE__, tty->driver->name, port->count ); schedule(); } set_current_state(TASK_RUNNING); - remove_wait_queue(&info->port.open_wait, &wait); + remove_wait_queue(&port->open_wait, &wait); if (extra_count) - info->port.count++; - info->port.blocked_open--; + port->count++; + port->blocked_open--; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s block_til_ready() after, count=%d\n", - __FILE__,__LINE__, tty->driver->name, info->port.count ); + __FILE__,__LINE__, tty->driver->name, port->count ); if (!retval) - info->port.flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return retval; } @@ -3782,6 +3746,11 @@ static void add_device(SLMP_INFO *info) #endif } +static const struct tty_port_operations port_ops = { + .carrier_raised = carrier_raised, + .raise_dtr_rts = raise_dtr_rts, +}; + /* Allocate and initialize a device instance structure * * Return Value: pointer to SLMP_INFO if success, otherwise NULL @@ -3798,6 +3767,7 @@ static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev) __FILE__,__LINE__, adapter_num, port_num); } else { tty_port_init(&info->port); + info->port.ops = &port_ops; info->magic = MGSL_MAGIC; INIT_WORK(&info->task, bh_handler); info->max_frame_size = 4096; @@ -3940,6 +3910,7 @@ static const struct tty_operations ops = { .tiocmset = tiocmset, }; + static void synclinkmp_cleanup(void) { int rc; diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index db15f9ba7c0b..d33e5ab06177 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -1111,9 +1111,7 @@ void tty_write_message(struct tty_struct *tty, char *msg) * Locks the line discipline as required * Writes to the tty driver are serialized by the atomic_write_lock * and are then processed in chunks to the device. The line discipline - * write method will not be involked in parallel for each device - * The line discipline write method is called under the big - * kernel lock for historical reasons. New code should not rely on this. + * write method will not be invoked in parallel for each device. */ static ssize_t tty_write(struct file *file, const char __user *buf, @@ -1213,7 +1211,7 @@ static void tty_line_name(struct tty_driver *driver, int index, char *p) * be held until the 'fast-open' is also done. Will change once we * have refcounting in the driver and per driver locking */ -struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver, +static struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver, struct inode *inode, int idx) { struct tty_struct *tty; @@ -2050,7 +2048,6 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg) /** * tty_do_resize - resize event * @tty: tty being resized - * @real_tty: real tty (not the same as tty if using a pty/tty pair) * @rows: rows (character) * @cols: cols (character) * @@ -2058,41 +2055,34 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg) * peform a terminal resize correctly */ -int tty_do_resize(struct tty_struct *tty, struct tty_struct *real_tty, - struct winsize *ws) +int tty_do_resize(struct tty_struct *tty, struct winsize *ws) { - struct pid *pgrp, *rpgrp; + struct pid *pgrp; unsigned long flags; - /* For a PTY we need to lock the tty side */ - mutex_lock(&real_tty->termios_mutex); - if (!memcmp(ws, &real_tty->winsize, sizeof(*ws))) + /* Lock the tty */ + mutex_lock(&tty->termios_mutex); + if (!memcmp(ws, &tty->winsize, sizeof(*ws))) goto done; /* Get the PID values and reference them so we can avoid holding the tty ctrl lock while sending signals */ spin_lock_irqsave(&tty->ctrl_lock, flags); pgrp = get_pid(tty->pgrp); - rpgrp = get_pid(real_tty->pgrp); spin_unlock_irqrestore(&tty->ctrl_lock, flags); if (pgrp) kill_pgrp(pgrp, SIGWINCH, 1); - if (rpgrp != pgrp && rpgrp) - kill_pgrp(rpgrp, SIGWINCH, 1); - put_pid(pgrp); - put_pid(rpgrp); tty->winsize = *ws; - real_tty->winsize = *ws; done: - mutex_unlock(&real_tty->termios_mutex); + mutex_unlock(&tty->termios_mutex); return 0; } /** * tiocswinsz - implement window size set ioctl - * @tty; tty + * @tty; tty side of tty * @arg: user buffer for result * * Copies the user idea of the window size to the kernel. Traditionally @@ -2105,17 +2095,16 @@ done: * then calls into the default method. */ -static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty, - struct winsize __user *arg) +static int tiocswinsz(struct tty_struct *tty, struct winsize __user *arg) { struct winsize tmp_ws; if (copy_from_user(&tmp_ws, arg, sizeof(*arg))) return -EFAULT; if (tty->ops->resize) - return tty->ops->resize(tty, real_tty, &tmp_ws); + return tty->ops->resize(tty, &tmp_ws); else - return tty_do_resize(tty, real_tty, &tmp_ws); + return tty_do_resize(tty, &tmp_ws); } /** @@ -2540,7 +2529,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case TIOCGWINSZ: return tiocgwinsz(real_tty, p); case TIOCSWINSZ: - return tiocswinsz(tty, real_tty, p); + return tiocswinsz(real_tty, p); case TIOCCONS: return real_tty != tty ? -EINVAL : tioccons(file); case FIONBIO: @@ -2785,6 +2774,8 @@ void initialize_tty_struct(struct tty_struct *tty, INIT_WORK(&tty->hangup_work, do_tty_hangup); mutex_init(&tty->atomic_read_lock); mutex_init(&tty->atomic_write_lock); + mutex_init(&tty->output_lock); + mutex_init(&tty->echo_lock); spin_lock_init(&tty->read_lock); spin_lock_init(&tty->ctrl_lock); INIT_LIST_HEAD(&tty->tty_files); diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index f307f135cbfb..7a84b406a952 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -316,8 +316,7 @@ struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty) { /* wait_event is a macro */ wait_event(tty_ldisc_wait, tty_ldisc_try(tty)); - if (tty->ldisc.refcount == 0) - printk(KERN_ERR "tty_ldisc_ref_wait\n"); + WARN_ON(tty->ldisc.refcount == 0); return &tty->ldisc; } @@ -376,15 +375,17 @@ EXPORT_SYMBOL_GPL(tty_ldisc_deref); * @tty: terminal to activate ldisc on * * Set the TTY_LDISC flag when the line discipline can be called - * again. Do necessary wakeups for existing sleepers. + * again. Do necessary wakeups for existing sleepers. Clear the LDISC + * changing flag to indicate any ldisc change is now over. * - * Note: nobody should set this bit except via this function. Clearing - * directly is allowed. + * Note: nobody should set the TTY_LDISC bit except via this function. + * Clearing directly is allowed. */ void tty_ldisc_enable(struct tty_struct *tty) { set_bit(TTY_LDISC, &tty->flags); + clear_bit(TTY_LDISC_CHANGING, &tty->flags); wake_up(&tty_ldisc_wait); } @@ -496,7 +497,14 @@ restart: * reference to the line discipline. The TTY_LDISC bit * prevents anyone taking a reference once it is clear. * We need the lock to avoid racing reference takers. + * + * We must clear the TTY_LDISC bit here to avoid a livelock + * with a userspace app continually trying to use the tty in + * parallel to the change and re-referencing the tty. */ + clear_bit(TTY_LDISC, &tty->flags); + if (o_tty) + clear_bit(TTY_LDISC, &o_tty->flags); spin_lock_irqsave(&tty_ldisc_lock, flags); if (tty->ldisc.refcount || (o_tty && o_tty->ldisc.refcount)) { @@ -528,7 +536,7 @@ restart: * If the TTY_LDISC bit is set, then we are racing against * another ldisc change */ - if (!test_bit(TTY_LDISC, &tty->flags)) { + if (test_bit(TTY_LDISC_CHANGING, &tty->flags)) { struct tty_ldisc *ld; spin_unlock_irqrestore(&tty_ldisc_lock, flags); tty_ldisc_put(new_ldisc.ops); @@ -536,10 +544,14 @@ restart: tty_ldisc_deref(ld); goto restart; } - - clear_bit(TTY_LDISC, &tty->flags); + /* + * This flag is used to avoid two parallel ldisc changes. Once + * open and close are fine grained locked this may work better + * as a mutex shared with the open/close/hup paths + */ + set_bit(TTY_LDISC_CHANGING, &tty->flags); if (o_tty) - clear_bit(TTY_LDISC, &o_tty->flags); + set_bit(TTY_LDISC_CHANGING, &o_tty->flags); spin_unlock_irqrestore(&tty_ldisc_lock, flags); /* diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index c8f8024cb40e..9b8004c72686 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -7,6 +7,7 @@ #include <linux/tty.h> #include <linux/tty_driver.h> #include <linux/tty_flip.h> +#include <linux/serial.h> #include <linux/timer.h> #include <linux/string.h> #include <linux/slab.h> @@ -94,3 +95,227 @@ void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty) spin_unlock_irqrestore(&port->lock, flags); } EXPORT_SYMBOL(tty_port_tty_set); + +/** + * tty_port_hangup - hangup helper + * @port: tty port + * + * Perform port level tty hangup flag and count changes. Drop the tty + * reference. + */ + +void tty_port_hangup(struct tty_port *port) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + port->count = 0; + port->flags &= ~ASYNC_NORMAL_ACTIVE; + if (port->tty) + tty_kref_put(port->tty); + port->tty = NULL; + spin_unlock_irqrestore(&port->lock, flags); + wake_up_interruptible(&port->open_wait); +} +EXPORT_SYMBOL(tty_port_hangup); + +/** + * tty_port_carrier_raised - carrier raised check + * @port: tty port + * + * Wrapper for the carrier detect logic. For the moment this is used + * to hide some internal details. This will eventually become entirely + * internal to the tty port. + */ + +int tty_port_carrier_raised(struct tty_port *port) +{ + if (port->ops->carrier_raised == NULL) + return 1; + return port->ops->carrier_raised(port); +} +EXPORT_SYMBOL(tty_port_carrier_raised); + +/** + * tty_port_raise_dtr_rts - Riase DTR/RTS + * @port: tty port + * + * Wrapper for the DTR/RTS raise logic. For the moment this is used + * to hide some internal details. This will eventually become entirely + * internal to the tty port. + */ + +void tty_port_raise_dtr_rts(struct tty_port *port) +{ + if (port->ops->raise_dtr_rts) + port->ops->raise_dtr_rts(port); +} +EXPORT_SYMBOL(tty_port_raise_dtr_rts); + +/** + * tty_port_block_til_ready - Waiting logic for tty open + * @port: the tty port being opened + * @tty: the tty device being bound + * @filp: the file pointer of the opener + * + * Implement the core POSIX/SuS tty behaviour when opening a tty device. + * Handles: + * - hangup (both before and during) + * - non blocking open + * - rts/dtr/dcd + * - signals + * - port flags and counts + * + * The passed tty_port must implement the carrier_raised method if it can + * do carrier detect and the raise_dtr_rts method if it supports software + * management of these lines. Note that the dtr/rts raise is done each + * iteration as a hangup may have previously dropped them while we wait. + */ + +int tty_port_block_til_ready(struct tty_port *port, + struct tty_struct *tty, struct file *filp) +{ + int do_clocal = 0, retval; + unsigned long flags; + DECLARE_WAITQUEUE(wait, current); + int cd; + + /* block if port is in the process of being closed */ + if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) { + interruptible_sleep_on(&port->close_wait); + if (port->flags & ASYNC_HUP_NOTIFY) + return -EAGAIN; + else + return -ERESTARTSYS; + } + + /* if non-blocking mode is set we can pass directly to open unless + the port has just hung up or is in another error state */ + if ((filp->f_flags & O_NONBLOCK) || + (tty->flags & (1 << TTY_IO_ERROR))) { + port->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + if (C_CLOCAL(tty)) + do_clocal = 1; + + /* Block waiting until we can proceed. We may need to wait for the + carrier, but we must also wait for any close that is in progress + before the next open may complete */ + + retval = 0; + add_wait_queue(&port->open_wait, &wait); + + /* The port lock protects the port counts */ + spin_lock_irqsave(&port->lock, flags); + if (!tty_hung_up_p(filp)) + port->count--; + port->blocked_open++; + spin_unlock_irqrestore(&port->lock, flags); + + while (1) { + /* Indicate we are open */ + if (tty->termios->c_cflag & CBAUD) + tty_port_raise_dtr_rts(port); + + set_current_state(TASK_INTERRUPTIBLE); + /* Check for a hangup or uninitialised port. Return accordingly */ + if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) { + if (port->flags & ASYNC_HUP_NOTIFY) + retval = -EAGAIN; + else + retval = -ERESTARTSYS; + break; + } + /* Probe the carrier. For devices with no carrier detect this + will always return true */ + cd = tty_port_carrier_raised(port); + if (!(port->flags & ASYNC_CLOSING) && + (do_clocal || cd)) + break; + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + schedule(); + } + set_current_state(TASK_RUNNING); + remove_wait_queue(&port->open_wait, &wait); + + /* Update counts. A parallel hangup will have set count to zero and + we must not mess that up further */ + spin_lock_irqsave(&port->lock, flags); + if (!tty_hung_up_p(filp)) + port->count++; + port->blocked_open--; + if (retval == 0) + port->flags |= ASYNC_NORMAL_ACTIVE; + spin_unlock_irqrestore(&port->lock, flags); + return 0; + +} +EXPORT_SYMBOL(tty_port_block_til_ready); + +int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct file *filp) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + if (tty_hung_up_p(filp)) { + spin_unlock_irqrestore(&port->lock, flags); + return 0; + } + + if( tty->count == 1 && port->count != 1) { + printk(KERN_WARNING + "tty_port_close_start: tty->count = 1 port count = %d.\n", + port->count); + port->count = 1; + } + if (--port->count < 0) { + printk(KERN_WARNING "tty_port_close_start: count = %d\n", + port->count); + port->count = 0; + } + + if (port->count) { + spin_unlock_irqrestore(&port->lock, flags); + return 0; + } + port->flags |= ASYNC_CLOSING; + tty->closing = 1; + spin_unlock_irqrestore(&port->lock, flags); + /* Don't block on a stalled port, just pull the chain */ + if (tty->flow_stopped) + tty_driver_flush_buffer(tty); + if (port->flags & ASYNC_INITIALIZED && + port->closing_wait != ASYNC_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, port->closing_wait); + return 1; +} +EXPORT_SYMBOL(tty_port_close_start); + +void tty_port_close_end(struct tty_port *port, struct tty_struct *tty) +{ + unsigned long flags; + + tty_ldisc_flush(tty); + + spin_lock_irqsave(&port->lock, flags); + tty->closing = 0; + + if (port->blocked_open) { + spin_unlock_irqrestore(&port->lock, flags); + if (port->close_delay) { + msleep_interruptible( + jiffies_to_msecs(port->close_delay)); + } + spin_lock_irqsave(&port->lock, flags); + wake_up_interruptible(&port->open_wait); + } + port->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); + wake_up_interruptible(&port->close_wait); + spin_unlock_irqrestore(&port->lock, flags); +} +EXPORT_SYMBOL(tty_port_close_end); diff --git a/drivers/char/vme_scc.c b/drivers/char/vme_scc.c index 1718b3c481db..0e8234bd0e19 100644 --- a/drivers/char/vme_scc.c +++ b/drivers/char/vme_scc.c @@ -69,7 +69,7 @@ static void scc_disable_tx_interrupts(void * ptr); static void scc_enable_tx_interrupts(void * ptr); static void scc_disable_rx_interrupts(void * ptr); static void scc_enable_rx_interrupts(void * ptr); -static int scc_get_CD(void * ptr); +static int scc_carrier_raised(struct tty_port *port); static void scc_shutdown_port(void * ptr); static int scc_set_real_termios(void *ptr); static void scc_hungup(void *ptr); @@ -100,7 +100,6 @@ static struct real_driver scc_real_driver = { scc_enable_tx_interrupts, scc_disable_rx_interrupts, scc_enable_rx_interrupts, - scc_get_CD, scc_shutdown_port, scc_set_real_termios, scc_chars_in_buffer, @@ -129,6 +128,10 @@ static const struct tty_operations scc_ops = { .break_ctl = scc_break_ctl, }; +static const struct tty_port_operations scc_port_ops = { + .carrier_raised = scc_carrier_raised, +}; + /*---------------------------------------------------------------------------- * vme_scc_init() and support functions *---------------------------------------------------------------------------*/ @@ -176,6 +179,8 @@ static void scc_init_portstructs(void) for (i = 0; i < 2; i++) { port = scc_ports + i; + tty_port_init(&port->gs.port); + port->gs.port.ops = &scc_port_ops; port->gs.magic = SCC_MAGIC; port->gs.close_delay = HZ/2; port->gs.closing_wait = 30 * HZ; @@ -624,10 +629,10 @@ static void scc_enable_rx_interrupts(void *ptr) } -static int scc_get_CD(void *ptr) +static int scc_carrier_raised(struct tty_port *port) { - struct scc_port *port = ptr; - unsigned channel = port->channel; + struct scc_port *sc = container_of(port, struct scc_port, gs.port); + unsigned channel = sc->channel; return !!(scc_last_status_reg[channel] & SR_DCD); } @@ -638,7 +643,7 @@ static void scc_shutdown_port(void *ptr) struct scc_port *port = ptr; port->gs.port.flags &= ~ GS_ACTIVE; - if (port->gs.port.tty && port->gs.port.tty->termios->c_cflag & HUPCL) { + if (port->gs.port.tty && (port->gs.port.tty->termios->c_cflag & HUPCL)) { scc_setsignals (port, 0, 0); } } @@ -779,7 +784,7 @@ static void scc_setsignals(struct scc_port *port, int dtr, int rts) static void scc_send_xchar(struct tty_struct *tty, char ch) { - struct scc_port *port = (struct scc_port *)tty->driver_data; + struct scc_port *port = tty->driver_data; port->x_char = ch; if (ch) @@ -896,7 +901,7 @@ static int scc_open (struct tty_struct * tty, struct file * filp) return retval; } - port->c_dcd = scc_get_CD (port); + port->c_dcd = tty_port_carrier_raised(&port->gs.port); scc_enable_rx_interrupts(port); @@ -906,7 +911,7 @@ static int scc_open (struct tty_struct * tty, struct file * filp) static void scc_throttle (struct tty_struct * tty) { - struct scc_port *port = (struct scc_port *)tty->driver_data; + struct scc_port *port = tty->driver_data; unsigned long flags; SCC_ACCESS_INIT(port); @@ -922,7 +927,7 @@ static void scc_throttle (struct tty_struct * tty) static void scc_unthrottle (struct tty_struct * tty) { - struct scc_port *port = (struct scc_port *)tty->driver_data; + struct scc_port *port = tty->driver_data; unsigned long flags; SCC_ACCESS_INIT(port); @@ -945,7 +950,7 @@ static int scc_ioctl(struct tty_struct *tty, struct file *file, static int scc_break_ctl(struct tty_struct *tty, int break_state) { - struct scc_port *port = (struct scc_port *)tty->driver_data; + struct scc_port *port = tty->driver_data; unsigned long flags; SCC_ACCESS_INIT(port); diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 008176edbd64..80014213fb53 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -819,8 +819,8 @@ static inline int resize_screen(struct vc_data *vc, int width, int height, * ctrl_lock of the tty IFF a tty is passed. */ -static int vc_do_resize(struct tty_struct *tty, struct tty_struct *real_tty, - struct vc_data *vc, unsigned int cols, unsigned int lines) +static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc, + unsigned int cols, unsigned int lines) { unsigned long old_origin, new_origin, new_scr_end, rlth, rrem, err = 0; unsigned int old_cols, old_rows, old_row_size, old_screen_size; @@ -932,7 +932,7 @@ static int vc_do_resize(struct tty_struct *tty, struct tty_struct *real_tty, ws.ws_row = vc->vc_rows; ws.ws_col = vc->vc_cols; ws.ws_ypixel = vc->vc_scan_lines; - tty_do_resize(tty, real_tty, &ws); + tty_do_resize(tty, &ws); } if (CON_IS_VISIBLE(vc)) @@ -954,13 +954,12 @@ static int vc_do_resize(struct tty_struct *tty, struct tty_struct *real_tty, int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows) { - return vc_do_resize(vc->vc_tty, vc->vc_tty, vc, cols, rows); + return vc_do_resize(vc->vc_tty, vc, cols, rows); } /** * vt_resize - resize a VT * @tty: tty to resize - * @real_tty: tty if a pty/tty pair * @ws: winsize attributes * * Resize a virtual terminal. This is called by the tty layer as we @@ -971,14 +970,13 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows) * termios_mutex and the tty ctrl_lock in that order. */ -int vt_resize(struct tty_struct *tty, struct tty_struct *real_tty, - struct winsize *ws) +int vt_resize(struct tty_struct *tty, struct winsize *ws) { struct vc_data *vc = tty->driver_data; int ret; acquire_console_sem(); - ret = vc_do_resize(tty, real_tty, vc, ws->ws_col, ws->ws_row); + ret = vc_do_resize(tty, vc, ws->ws_col, ws->ws_row); release_console_sem(); return ret; } @@ -2679,7 +2677,7 @@ static int con_write_room(struct tty_struct *tty) { if (tty->stopped) return 0; - return 4096; /* No limit, really; we're not buffering */ + return 32768; /* No limit, really; we're not buffering */ } static int con_chars_in_buffer(struct tty_struct *tty) diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c index 8944ce508e2f..a2dee0eb6dad 100644 --- a/drivers/char/vt_ioctl.c +++ b/drivers/char/vt_ioctl.c @@ -366,7 +366,7 @@ do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_ int vt_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) { - struct vc_data *vc = (struct vc_data *)tty->driver_data; + struct vc_data *vc = tty->driver_data; struct console_font_op op; /* used in multiple places here */ struct kbd_struct * kbd; unsigned int console; diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 9f7896a25f1b..c4918b86ed19 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -3,6 +3,8 @@ * Driver for Option High Speed Mobile Devices. * * Copyright (C) 2008 Option International + * Filip Aben <f.aben@option.com> + * Denis Joseph Barrow <d.barow@option.com> * Copyright (C) 2007 Andrew Bird (Sphere Systems Ltd) * <ajb@spheresystems.co.uk> * Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de> @@ -39,8 +41,11 @@ * port is opened, as this have a huge impact on the network port * throughput. * - * Interface 2: Standard modem interface - circuit switched interface, should - * not be used. + * Interface 2: Standard modem interface - circuit switched interface, this + * can be used to make a standard ppp connection however it + * should not be used in conjunction with the IP network interface + * enabled for USB performance reasons i.e. if using this set + * ideally disable_net=1. * *****************************************************************************/ @@ -63,6 +68,8 @@ #include <linux/usb/cdc.h> #include <net/arp.h> #include <asm/byteorder.h> +#include <linux/serial_core.h> +#include <linux/serial.h> #define DRIVER_VERSION "1.2" @@ -182,6 +189,41 @@ enum rx_ctrl_state{ RX_PENDING }; +#define BM_REQUEST_TYPE (0xa1) +#define B_NOTIFICATION (0x20) +#define W_VALUE (0x0) +#define W_INDEX (0x2) +#define W_LENGTH (0x2) + +#define B_OVERRUN (0x1<<6) +#define B_PARITY (0x1<<5) +#define B_FRAMING (0x1<<4) +#define B_RING_SIGNAL (0x1<<3) +#define B_BREAK (0x1<<2) +#define B_TX_CARRIER (0x1<<1) +#define B_RX_CARRIER (0x1<<0) + +struct hso_serial_state_notification { + u8 bmRequestType; + u8 bNotification; + u16 wValue; + u16 wIndex; + u16 wLength; + u16 UART_state_bitmap; +} __attribute__((packed)); + +struct hso_tiocmget { + struct mutex mutex; + wait_queue_head_t waitq; + int intr_completed; + struct usb_endpoint_descriptor *endp; + struct urb *urb; + struct hso_serial_state_notification serial_state_notification; + u16 prev_UART_state_bitmap; + struct uart_icount icount; +}; + + struct hso_serial { struct hso_device *parent; int magic; @@ -219,6 +261,7 @@ struct hso_serial { spinlock_t serial_lock; int (*write_data) (struct hso_serial *serial); + struct hso_tiocmget *tiocmget; /* Hacks required to get flow control * working on the serial receive buffers * so as not to drop characters on the floor. @@ -305,7 +348,7 @@ static void async_get_intf(struct work_struct *data); static void async_put_intf(struct work_struct *data); static int hso_put_activity(struct hso_device *hso_dev); static int hso_get_activity(struct hso_device *hso_dev); - +static void tiocmget_intr_callback(struct urb *urb); /*****************************************************************************/ /* Helping functions */ /*****************************************************************************/ @@ -362,8 +405,6 @@ static struct tty_driver *tty_drv; static struct hso_device *serial_table[HSO_SERIAL_TTY_MINORS]; static struct hso_device *network_table[HSO_MAX_NET_DEVICES]; static spinlock_t serial_table_lock; -static struct ktermios *hso_serial_termios[HSO_SERIAL_TTY_MINORS]; -static struct ktermios *hso_serial_termios_locked[HSO_SERIAL_TTY_MINORS]; static const s32 default_port_spec[] = { HSO_INTF_MUX | HSO_PORT_NETWORK, @@ -1009,23 +1050,11 @@ static void read_bulk_callback(struct urb *urb) /* Serial driver functions */ -static void _hso_serial_set_termios(struct tty_struct *tty, - struct ktermios *old) +static void hso_init_termios(struct ktermios *termios) { - struct hso_serial *serial = get_serial_by_tty(tty); - struct ktermios *termios; - - if ((!tty) || (!tty->termios) || (!serial)) { - printk(KERN_ERR "%s: no tty structures", __func__); - return; - } - - D4("port %d", serial->minor); - /* * The default requirements for this device are: */ - termios = tty->termios; termios->c_iflag &= ~(IGNBRK /* disable ignore break */ | BRKINT /* disable break causes interrupt */ @@ -1057,15 +1086,38 @@ static void _hso_serial_set_termios(struct tty_struct *tty, termios->c_cflag |= CS8; /* character size 8 bits */ /* baud rate 115200 */ - tty_encode_baud_rate(serial->tty, 115200, 115200); + tty_termios_encode_baud_rate(termios, 115200, 115200); +} + +static void _hso_serial_set_termios(struct tty_struct *tty, + struct ktermios *old) +{ + struct hso_serial *serial = get_serial_by_tty(tty); + struct ktermios *termios; + + if (!serial) { + printk(KERN_ERR "%s: no tty structures", __func__); + return; + } + + D4("port %d", serial->minor); /* - * Force low_latency on; otherwise the pushes are scheduled; - * this is bad as it opens up the possibility of dropping bytes - * on the floor. We don't want to drop bytes on the floor. :) + * Fix up unsupported bits */ - serial->tty->low_latency = 1; - return; + termios = tty->termios; + termios->c_iflag &= ~IXON; /* disable enable XON/XOFF flow control */ + + termios->c_cflag &= + ~(CSIZE /* no size */ + | PARENB /* disable parity bit */ + | CBAUD /* clear current baud rate */ + | CBAUDEX); /* clear current buad rate */ + + termios->c_cflag |= CS8; /* character size 8 bits */ + + /* baud rate 115200 */ + tty_encode_baud_rate(tty, 115200, 115200); } static void hso_resubmit_rx_bulk_urb(struct hso_serial *serial, struct urb *urb) @@ -1228,6 +1280,7 @@ static int hso_serial_open(struct tty_struct *tty, struct file *filp) /* sanity check */ if (serial == NULL || serial->magic != HSO_SERIAL_MAGIC) { + WARN_ON(1); tty->driver_data = NULL; D1("Failed to open port"); return -ENODEV; @@ -1242,8 +1295,10 @@ static int hso_serial_open(struct tty_struct *tty, struct file *filp) kref_get(&serial->parent->ref); /* setup */ + spin_lock_irq(&serial->serial_lock); tty->driver_data = serial; - serial->tty = tty; + serial->tty = tty_kref_get(tty); + spin_unlock_irq(&serial->serial_lock); /* check for port already opened, if not set the termios */ serial->open_count++; @@ -1285,6 +1340,10 @@ static void hso_serial_close(struct tty_struct *tty, struct file *filp) D1("Closing serial port"); + /* Open failed, no close cleanup required */ + if (serial == NULL) + return; + mutex_lock(&serial->parent->mutex); usb_gone = serial->parent->usb_gone; @@ -1297,10 +1356,13 @@ static void hso_serial_close(struct tty_struct *tty, struct file *filp) kref_put(&serial->parent->ref, hso_serial_ref_free); if (serial->open_count <= 0) { serial->open_count = 0; - if (serial->tty) { + spin_lock_irq(&serial->serial_lock); + if (serial->tty == tty) { serial->tty->driver_data = NULL; serial->tty = NULL; + tty_kref_put(tty); } + spin_unlock_irq(&serial->serial_lock); if (!usb_gone) hso_stop_serial_device(serial->parent); tasklet_kill(&serial->unthrottle_tasklet); @@ -1400,25 +1462,217 @@ static int hso_serial_chars_in_buffer(struct tty_struct *tty) return chars; } +int tiocmget_submit_urb(struct hso_serial *serial, + struct hso_tiocmget *tiocmget, + struct usb_device *usb) +{ + int result; + + if (serial->parent->usb_gone) + return -ENODEV; + usb_fill_int_urb(tiocmget->urb, usb, + usb_rcvintpipe(usb, + tiocmget->endp-> + bEndpointAddress & 0x7F), + &tiocmget->serial_state_notification, + sizeof(struct hso_serial_state_notification), + tiocmget_intr_callback, serial, + tiocmget->endp->bInterval); + result = usb_submit_urb(tiocmget->urb, GFP_ATOMIC); + if (result) { + dev_warn(&usb->dev, "%s usb_submit_urb failed %d\n", __func__, + result); + } + return result; + +} + +static void tiocmget_intr_callback(struct urb *urb) +{ + struct hso_serial *serial = urb->context; + struct hso_tiocmget *tiocmget; + int status = urb->status; + u16 UART_state_bitmap, prev_UART_state_bitmap; + struct uart_icount *icount; + struct hso_serial_state_notification *serial_state_notification; + struct usb_device *usb; + + /* Sanity checks */ + if (!serial) + return; + if (status) { + log_usb_status(status, __func__); + return; + } + tiocmget = serial->tiocmget; + if (!tiocmget) + return; + usb = serial->parent->usb; + serial_state_notification = &tiocmget->serial_state_notification; + if (serial_state_notification->bmRequestType != BM_REQUEST_TYPE || + serial_state_notification->bNotification != B_NOTIFICATION || + le16_to_cpu(serial_state_notification->wValue) != W_VALUE || + le16_to_cpu(serial_state_notification->wIndex) != W_INDEX || + le16_to_cpu(serial_state_notification->wLength) != W_LENGTH) { + dev_warn(&usb->dev, + "hso received invalid serial state notification\n"); + DUMP(serial_state_notification, + sizeof(hso_serial_state_notifation)) + } else { + + UART_state_bitmap = le16_to_cpu(serial_state_notification-> + UART_state_bitmap); + prev_UART_state_bitmap = tiocmget->prev_UART_state_bitmap; + icount = &tiocmget->icount; + spin_lock(&serial->serial_lock); + if ((UART_state_bitmap & B_OVERRUN) != + (prev_UART_state_bitmap & B_OVERRUN)) + icount->parity++; + if ((UART_state_bitmap & B_PARITY) != + (prev_UART_state_bitmap & B_PARITY)) + icount->parity++; + if ((UART_state_bitmap & B_FRAMING) != + (prev_UART_state_bitmap & B_FRAMING)) + icount->frame++; + if ((UART_state_bitmap & B_RING_SIGNAL) && + !(prev_UART_state_bitmap & B_RING_SIGNAL)) + icount->rng++; + if ((UART_state_bitmap & B_BREAK) != + (prev_UART_state_bitmap & B_BREAK)) + icount->brk++; + if ((UART_state_bitmap & B_TX_CARRIER) != + (prev_UART_state_bitmap & B_TX_CARRIER)) + icount->dsr++; + if ((UART_state_bitmap & B_RX_CARRIER) != + (prev_UART_state_bitmap & B_RX_CARRIER)) + icount->dcd++; + tiocmget->prev_UART_state_bitmap = UART_state_bitmap; + spin_unlock(&serial->serial_lock); + tiocmget->intr_completed = 1; + wake_up_interruptible(&tiocmget->waitq); + } + memset(serial_state_notification, 0, + sizeof(struct hso_serial_state_notification)); + tiocmget_submit_urb(serial, + tiocmget, + serial->parent->usb); +} + +/* + * next few functions largely stolen from drivers/serial/serial_core.c + */ +/* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change + * - mask passed in arg for lines of interest + * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) + * Caller should use TIOCGICOUNT to see which one it was + */ +static int +hso_wait_modem_status(struct hso_serial *serial, unsigned long arg) +{ + DECLARE_WAITQUEUE(wait, current); + struct uart_icount cprev, cnow; + struct hso_tiocmget *tiocmget; + int ret; + + tiocmget = serial->tiocmget; + if (!tiocmget) + return -ENOENT; + /* + * note the counters on entry + */ + spin_lock_irq(&serial->serial_lock); + memcpy(&cprev, &tiocmget->icount, sizeof(struct uart_icount)); + spin_unlock_irq(&serial->serial_lock); + add_wait_queue(&tiocmget->waitq, &wait); + for (;;) { + spin_lock_irq(&serial->serial_lock); + memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount)); + spin_unlock_irq(&serial->serial_lock); + set_current_state(TASK_INTERRUPTIBLE); + if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd))) { + ret = 0; + break; + } + schedule(); + /* see if a signal did it */ + if (signal_pending(current)) { + ret = -ERESTARTSYS; + break; + } + cprev = cnow; + } + current->state = TASK_RUNNING; + remove_wait_queue(&tiocmget->waitq, &wait); + + return ret; +} + +/* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ +static int hso_get_count(struct hso_serial *serial, + struct serial_icounter_struct __user *icnt) +{ + struct serial_icounter_struct icount; + struct uart_icount cnow; + struct hso_tiocmget *tiocmget = serial->tiocmget; + + if (!tiocmget) + return -ENOENT; + spin_lock_irq(&serial->serial_lock); + memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount)); + spin_unlock_irq(&serial->serial_lock); + + icount.cts = cnow.cts; + icount.dsr = cnow.dsr; + icount.rng = cnow.rng; + icount.dcd = cnow.dcd; + icount.rx = cnow.rx; + icount.tx = cnow.tx; + icount.frame = cnow.frame; + icount.overrun = cnow.overrun; + icount.parity = cnow.parity; + icount.brk = cnow.brk; + icount.buf_overrun = cnow.buf_overrun; + + return copy_to_user(icnt, &icount, sizeof(icount)) ? -EFAULT : 0; +} + static int hso_serial_tiocmget(struct tty_struct *tty, struct file *file) { - unsigned int value; + int retval; struct hso_serial *serial = get_serial_by_tty(tty); - unsigned long flags; + struct hso_tiocmget *tiocmget; + u16 UART_state_bitmap; /* sanity check */ if (!serial) { D1("no tty structures"); return -EINVAL; } - - spin_lock_irqsave(&serial->serial_lock, flags); - value = ((serial->rts_state) ? TIOCM_RTS : 0) | + spin_lock_irq(&serial->serial_lock); + retval = ((serial->rts_state) ? TIOCM_RTS : 0) | ((serial->dtr_state) ? TIOCM_DTR : 0); - spin_unlock_irqrestore(&serial->serial_lock, flags); + tiocmget = serial->tiocmget; + if (tiocmget) { - return value; + UART_state_bitmap = le16_to_cpu( + tiocmget->prev_UART_state_bitmap); + if (UART_state_bitmap & B_RING_SIGNAL) + retval |= TIOCM_RNG; + if (UART_state_bitmap & B_RX_CARRIER) + retval |= TIOCM_CD; + if (UART_state_bitmap & B_TX_CARRIER) + retval |= TIOCM_DSR; + } + spin_unlock_irq(&serial->serial_lock); + return retval; } static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file, @@ -1460,6 +1714,32 @@ static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file, USB_CTRL_SET_TIMEOUT); } +static int hso_serial_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct hso_serial *serial = get_serial_by_tty(tty); + void __user *uarg = (void __user *)arg; + int ret = 0; + D4("IOCTL cmd: %d, arg: %ld", cmd, arg); + + if (!serial) + return -ENODEV; + switch (cmd) { + case TIOCMIWAIT: + ret = hso_wait_modem_status(serial, arg); + break; + + case TIOCGICOUNT: + ret = hso_get_count(serial, uarg); + break; + default: + ret = -ENOIOCTLCMD; + break; + } + return ret; +} + + /* starts a transmit */ static void hso_kick_transmit(struct hso_serial *serial) { @@ -1653,6 +1933,7 @@ static void hso_std_serial_write_bulk_callback(struct urb *urb) { struct hso_serial *serial = urb->context; int status = urb->status; + struct tty_struct *tty; /* sanity check */ if (!serial) { @@ -1662,14 +1943,18 @@ static void hso_std_serial_write_bulk_callback(struct urb *urb) spin_lock(&serial->serial_lock); serial->tx_urb_used = 0; + tty = tty_kref_get(serial->tty); spin_unlock(&serial->serial_lock); if (status) { log_usb_status(status, __func__); + tty_kref_put(tty); return; } hso_put_activity(serial->parent); - if (serial->tty) - tty_wakeup(serial->tty); + if (tty) { + tty_wakeup(tty); + tty_kref_put(tty); + } hso_kick_transmit(serial); D1(" "); @@ -1706,6 +1991,7 @@ static void ctrl_callback(struct urb *urb) struct hso_serial *serial = urb->context; struct usb_ctrlrequest *req; int status = urb->status; + struct tty_struct *tty; /* sanity check */ if (!serial) @@ -1713,9 +1999,11 @@ static void ctrl_callback(struct urb *urb) spin_lock(&serial->serial_lock); serial->tx_urb_used = 0; + tty = tty_kref_get(serial->tty); spin_unlock(&serial->serial_lock); if (status) { log_usb_status(status, __func__); + tty_kref_put(tty); return; } @@ -1734,25 +2022,31 @@ static void ctrl_callback(struct urb *urb) spin_unlock(&serial->serial_lock); } else { hso_put_activity(serial->parent); - if (serial->tty) - tty_wakeup(serial->tty); + if (tty) + tty_wakeup(tty); /* response to a write command */ hso_kick_transmit(serial); } + tty_kref_put(tty); } /* handle RX data for serial port */ static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial) { - struct tty_struct *tty = serial->tty; + struct tty_struct *tty; int write_length_remaining = 0; int curr_write_len; + /* Sanity check */ if (urb == NULL || serial == NULL) { D1("serial = NULL"); return -2; } + spin_lock(&serial->serial_lock); + tty = tty_kref_get(serial->tty); + spin_unlock(&serial->serial_lock); + /* Push data to tty */ if (tty) { write_length_remaining = urb->actual_length - @@ -1774,6 +2068,7 @@ static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial) serial->curr_rx_urb_offset = 0; serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0; } + tty_kref_put(tty); return write_length_remaining; } @@ -1922,7 +2217,10 @@ static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags) serial->shared_int->use_count++; mutex_unlock(&serial->shared_int->shared_int_lock); } - + if (serial->tiocmget) + tiocmget_submit_urb(serial, + serial->tiocmget, + serial->parent->usb); return result; } @@ -1930,6 +2228,7 @@ static int hso_stop_serial_device(struct hso_device *hso_dev) { int i; struct hso_serial *serial = dev2ser(hso_dev); + struct hso_tiocmget *tiocmget; if (!serial) return -ENODEV; @@ -1958,6 +2257,11 @@ static int hso_stop_serial_device(struct hso_device *hso_dev) } mutex_unlock(&serial->shared_int->shared_int_lock); } + tiocmget = serial->tiocmget; + if (tiocmget) { + wake_up_interruptible(&tiocmget->waitq); + usb_kill_urb(tiocmget->urb); + } return 0; } @@ -2304,6 +2608,20 @@ exit: return NULL; } +static void hso_free_tiomget(struct hso_serial *serial) +{ + struct hso_tiocmget *tiocmget = serial->tiocmget; + if (tiocmget) { + kfree(tiocmget); + if (tiocmget->urb) { + usb_free_urb(tiocmget->urb); + tiocmget->urb = NULL; + } + serial->tiocmget = NULL; + + } +} + /* Frees an AT channel ( goes for both mux and non-mux ) */ static void hso_free_serial_device(struct hso_device *hso_dev) { @@ -2322,6 +2640,7 @@ static void hso_free_serial_device(struct hso_device *hso_dev) else mutex_unlock(&serial->shared_int->shared_int_lock); } + hso_free_tiomget(serial); kfree(serial); hso_free_device(hso_dev); } @@ -2333,6 +2652,7 @@ static struct hso_device *hso_create_bulk_serial_device( struct hso_device *hso_dev; struct hso_serial *serial; int num_urbs; + struct hso_tiocmget *tiocmget; hso_dev = hso_create_device(interface, port); if (!hso_dev) @@ -2345,8 +2665,27 @@ static struct hso_device *hso_create_bulk_serial_device( serial->parent = hso_dev; hso_dev->port_data.dev_serial = serial; - if (port & HSO_PORT_MODEM) + if ((port & HSO_PORT_MASK) == HSO_PORT_MODEM) { num_urbs = 2; + serial->tiocmget = kzalloc(sizeof(struct hso_tiocmget), + GFP_KERNEL); + /* it isn't going to break our heart if serial->tiocmget + * allocation fails don't bother checking this. + */ + if (serial->tiocmget) { + tiocmget = serial->tiocmget; + tiocmget->urb = usb_alloc_urb(0, GFP_KERNEL); + if (tiocmget->urb) { + mutex_init(&tiocmget->mutex); + init_waitqueue_head(&tiocmget->waitq); + tiocmget->endp = hso_get_ep( + interface, + USB_ENDPOINT_XFER_INT, + USB_DIR_IN); + } else + hso_free_tiomget(serial); + } + } else num_urbs = 1; @@ -2382,6 +2721,7 @@ static struct hso_device *hso_create_bulk_serial_device( exit2: hso_serial_common_free(serial); exit: + hso_free_tiomget(serial); kfree(serial); hso_free_device(hso_dev); return NULL; @@ -2786,15 +3126,20 @@ static void hso_serial_ref_free(struct kref *ref) static void hso_free_interface(struct usb_interface *interface) { struct hso_serial *hso_dev; + struct tty_struct *tty; int i; for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) { if (serial_table[i] && (serial_table[i]->interface == interface)) { hso_dev = dev2ser(serial_table[i]); - if (hso_dev->tty) - tty_hangup(hso_dev->tty); + spin_lock_irq(&hso_dev->serial_lock); + tty = tty_kref_get(hso_dev->tty); + spin_unlock_irq(&hso_dev->serial_lock); + if (tty) + tty_hangup(tty); mutex_lock(&hso_dev->parent->mutex); + tty_kref_put(tty); hso_dev->parent->usb_gone = 1; mutex_unlock(&hso_dev->parent->mutex); kref_put(&serial_table[i]->ref, hso_serial_ref_free); @@ -2887,6 +3232,7 @@ static const struct tty_operations hso_serial_ops = { .close = hso_serial_close, .write = hso_serial_write, .write_room = hso_serial_write_room, + .ioctl = hso_serial_ioctl, .set_termios = hso_serial_set_termios, .chars_in_buffer = hso_serial_chars_in_buffer, .tiocmget = hso_serial_tiocmget, @@ -2939,9 +3285,7 @@ static int __init hso_init(void) tty_drv->subtype = SERIAL_TYPE_NORMAL; tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; tty_drv->init_termios = tty_std_termios; - tty_drv->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - tty_drv->termios = hso_serial_termios; - tty_drv->termios_locked = hso_serial_termios_locked; + hso_init_termios(&tty_drv->init_termios); tty_set_operations(tty_drv, &hso_serial_ops); /* register the tty driver */ diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 303272af386e..daa00567bc44 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -279,6 +279,13 @@ static const struct serial8250_config uart_config[] = { .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, .flags = UART_CAP_FIFO, }, + [PORT_OCTEON] = { + .name = "OCTEON", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO, + }, }; #if defined (CONFIG_SERIAL_8250_AU1X00) @@ -303,16 +310,16 @@ static const u8 au_io_out_map[] = { }; /* sane hardware needs no mapping */ -static inline int map_8250_in_reg(struct uart_8250_port *up, int offset) +static inline int map_8250_in_reg(struct uart_port *p, int offset) { - if (up->port.iotype != UPIO_AU) + if (p->iotype != UPIO_AU) return offset; return au_io_in_map[offset]; } -static inline int map_8250_out_reg(struct uart_8250_port *up, int offset) +static inline int map_8250_out_reg(struct uart_port *p, int offset) { - if (up->port.iotype != UPIO_AU) + if (p->iotype != UPIO_AU) return offset; return au_io_out_map[offset]; } @@ -341,16 +348,16 @@ static const u8 [UART_SCR] = 0x2c }; -static inline int map_8250_in_reg(struct uart_8250_port *up, int offset) +static inline int map_8250_in_reg(struct uart_port *p, int offset) { - if (up->port.iotype != UPIO_RM9000) + if (p->iotype != UPIO_RM9000) return offset; return regmap_in[offset]; } -static inline int map_8250_out_reg(struct uart_8250_port *up, int offset) +static inline int map_8250_out_reg(struct uart_port *p, int offset) { - if (up->port.iotype != UPIO_RM9000) + if (p->iotype != UPIO_RM9000) return offset; return regmap_out[offset]; } @@ -363,108 +370,170 @@ static inline int map_8250_out_reg(struct uart_8250_port *up, int offset) #endif -static unsigned int serial_in(struct uart_8250_port *up, int offset) +static unsigned int hub6_serial_in(struct uart_port *p, int offset) { - unsigned int tmp; - offset = map_8250_in_reg(up, offset) << up->port.regshift; + offset = map_8250_in_reg(p, offset) << p->regshift; + outb(p->hub6 - 1 + offset, p->iobase); + return inb(p->iobase + 1); +} - switch (up->port.iotype) { - case UPIO_HUB6: - outb(up->port.hub6 - 1 + offset, up->port.iobase); - return inb(up->port.iobase + 1); +static void hub6_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + outb(p->hub6 - 1 + offset, p->iobase); + outb(value, p->iobase + 1); +} - case UPIO_MEM: - case UPIO_DWAPB: - return readb(up->port.membase + offset); +static unsigned int mem_serial_in(struct uart_port *p, int offset) +{ + offset = map_8250_in_reg(p, offset) << p->regshift; + return readb(p->membase + offset); +} - case UPIO_RM9000: - case UPIO_MEM32: - return readl(up->port.membase + offset); +static void mem_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + writeb(value, p->membase + offset); +} + +static void mem32_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + writel(value, p->membase + offset); +} + +static unsigned int mem32_serial_in(struct uart_port *p, int offset) +{ + offset = map_8250_in_reg(p, offset) << p->regshift; + return readl(p->membase + offset); +} #ifdef CONFIG_SERIAL_8250_AU1X00 - case UPIO_AU: - return __raw_readl(up->port.membase + offset); +static unsigned int au_serial_in(struct uart_port *p, int offset) +{ + offset = map_8250_in_reg(p, offset) << p->regshift; + return __raw_readl(p->membase + offset); +} + +static void au_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + __raw_writel(value, p->membase + offset); +} #endif - case UPIO_TSI: - if (offset == UART_IIR) { - tmp = readl(up->port.membase + (UART_IIR & ~3)); - return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */ - } else - return readb(up->port.membase + offset); +static unsigned int tsi_serial_in(struct uart_port *p, int offset) +{ + unsigned int tmp; + offset = map_8250_in_reg(p, offset) << p->regshift; + if (offset == UART_IIR) { + tmp = readl(p->membase + (UART_IIR & ~3)); + return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */ + } else + return readb(p->membase + offset); +} - default: - return inb(up->port.iobase + offset); - } +static void tsi_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + if (!((offset == UART_IER) && (value & UART_IER_UUE))) + writeb(value, p->membase + offset); } -static void -serial_out(struct uart_8250_port *up, int offset, int value) +static void dwapb_serial_out(struct uart_port *p, int offset, int value) { - /* Save the offset before it's remapped */ int save_offset = offset; - offset = map_8250_out_reg(up, offset) << up->port.regshift; + offset = map_8250_out_reg(p, offset) << p->regshift; + /* Save the LCR value so it can be re-written when a + * Busy Detect interrupt occurs. */ + if (save_offset == UART_LCR) { + struct uart_8250_port *up = (struct uart_8250_port *)p; + up->lcr = value; + } + writeb(value, p->membase + offset); + /* Read the IER to ensure any interrupt is cleared before + * returning from ISR. */ + if (save_offset == UART_TX || save_offset == UART_IER) + value = p->serial_in(p, UART_IER); +} - switch (up->port.iotype) { +static unsigned int io_serial_in(struct uart_port *p, int offset) +{ + offset = map_8250_in_reg(p, offset) << p->regshift; + return inb(p->iobase + offset); +} + +static void io_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + outb(value, p->iobase + offset); +} + +static void set_io_from_upio(struct uart_port *p) +{ + switch (p->iotype) { case UPIO_HUB6: - outb(up->port.hub6 - 1 + offset, up->port.iobase); - outb(value, up->port.iobase + 1); + p->serial_in = hub6_serial_in; + p->serial_out = hub6_serial_out; break; case UPIO_MEM: - writeb(value, up->port.membase + offset); + p->serial_in = mem_serial_in; + p->serial_out = mem_serial_out; break; case UPIO_RM9000: case UPIO_MEM32: - writel(value, up->port.membase + offset); + p->serial_in = mem32_serial_in; + p->serial_out = mem32_serial_out; break; #ifdef CONFIG_SERIAL_8250_AU1X00 case UPIO_AU: - __raw_writel(value, up->port.membase + offset); + p->serial_in = au_serial_in; + p->serial_out = au_serial_out; break; #endif case UPIO_TSI: - if (!((offset == UART_IER) && (value & UART_IER_UUE))) - writeb(value, up->port.membase + offset); + p->serial_in = tsi_serial_in; + p->serial_out = tsi_serial_out; break; case UPIO_DWAPB: - /* Save the LCR value so it can be re-written when a - * Busy Detect interrupt occurs. */ - if (save_offset == UART_LCR) - up->lcr = value; - writeb(value, up->port.membase + offset); - /* Read the IER to ensure any interrupt is cleared before - * returning from ISR. */ - if (save_offset == UART_TX || save_offset == UART_IER) - value = serial_in(up, UART_IER); + p->serial_in = mem_serial_in; + p->serial_out = dwapb_serial_out; break; default: - outb(value, up->port.iobase + offset); + p->serial_in = io_serial_in; + p->serial_out = io_serial_out; + break; } } static void serial_out_sync(struct uart_8250_port *up, int offset, int value) { - switch (up->port.iotype) { + struct uart_port *p = &up->port; + switch (p->iotype) { case UPIO_MEM: case UPIO_MEM32: #ifdef CONFIG_SERIAL_8250_AU1X00 case UPIO_AU: #endif case UPIO_DWAPB: - serial_out(up, offset, value); - serial_in(up, UART_LCR); /* safe, no side-effects */ + p->serial_out(p, offset, value); + p->serial_in(p, UART_LCR); /* safe, no side-effects */ break; default: - serial_out(up, offset, value); + p->serial_out(p, offset, value); } } +#define serial_in(up, offset) \ + (up->port.serial_in(&(up)->port, (offset))) +#define serial_out(up, offset, value) \ + (up->port.serial_out(&(up)->port, (offset), (value))) /* * We used to support using pause I/O for certain machines. We * haven't supported this for a while, but just in case it's badly @@ -2576,6 +2645,7 @@ static void __init serial8250_isa_init_ports(void) up->port.membase = old_serial_port[i].iomem_base; up->port.iotype = old_serial_port[i].io_type; up->port.regshift = old_serial_port[i].iomem_reg_shift; + set_io_from_upio(&up->port); if (share_irqs) up->port.flags |= UPF_SHARE_IRQ; } @@ -2752,12 +2822,30 @@ static struct uart_driver serial8250_reg = { */ int __init early_serial_setup(struct uart_port *port) { + struct uart_port *p; + if (port->line >= ARRAY_SIZE(serial8250_ports)) return -ENODEV; serial8250_isa_init_ports(); - serial8250_ports[port->line].port = *port; - serial8250_ports[port->line].port.ops = &serial8250_pops; + p = &serial8250_ports[port->line].port; + p->iobase = port->iobase; + p->membase = port->membase; + p->irq = port->irq; + p->uartclk = port->uartclk; + p->fifosize = port->fifosize; + p->regshift = port->regshift; + p->iotype = port->iotype; + p->flags = port->flags; + p->mapbase = port->mapbase; + p->private_data = port->private_data; + + set_io_from_upio(p); + if (port->serial_in) + p->serial_in = port->serial_in; + if (port->serial_out) + p->serial_out = port->serial_out; + return 0; } @@ -2822,6 +2910,9 @@ static int __devinit serial8250_probe(struct platform_device *dev) port.mapbase = p->mapbase; port.hub6 = p->hub6; port.private_data = p->private_data; + port.type = p->type; + port.serial_in = p->serial_in; + port.serial_out = p->serial_out; port.dev = &dev->dev; if (share_irqs) port.flags |= UPF_SHARE_IRQ; @@ -2976,6 +3067,20 @@ int serial8250_register_port(struct uart_port *port) if (port->dev) uart->port.dev = port->dev; + if (port->flags & UPF_FIXED_TYPE) { + uart->port.type = port->type; + uart->port.fifosize = uart_config[port->type].fifo_size; + uart->capabilities = uart_config[port->type].flags; + uart->tx_loadsz = uart_config[port->type].tx_loadsz; + } + + set_io_from_upio(&uart->port); + /* Possibly override default I/O functions. */ + if (port->serial_in) + uart->port.serial_in = port->serial_in; + if (port->serial_out) + uart->port.serial_out = port->serial_out; + ret = uart_add_one_port(&serial8250_reg, &uart->port); if (ret == 0) ret = uart->port.line; diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 5450a0e5ecdb..c088146b7513 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -42,7 +42,8 @@ struct pci_serial_quirk { u32 subvendor; u32 subdevice; int (*init)(struct pci_dev *dev); - int (*setup)(struct serial_private *, struct pciserial_board *, + int (*setup)(struct serial_private *, + const struct pciserial_board *, struct uart_port *, int); void (*exit)(struct pci_dev *dev); }; @@ -107,7 +108,7 @@ setup_port(struct serial_private *priv, struct uart_port *port, * ADDI-DATA GmbH communication cards <info@addi-data.com> */ static int addidata_apci7800_setup(struct serial_private *priv, - struct pciserial_board *board, + const struct pciserial_board *board, struct uart_port *port, int idx) { unsigned int bar = 0, offset = board->first_offset; @@ -134,7 +135,7 @@ static int addidata_apci7800_setup(struct serial_private *priv, * Not that ugly ;) -- HW */ static int -afavlab_setup(struct serial_private *priv, struct pciserial_board *board, +afavlab_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_port *port, int idx) { unsigned int bar, offset = board->first_offset; @@ -188,8 +189,9 @@ static int pci_hp_diva_init(struct pci_dev *dev) * some serial ports are supposed to be hidden on certain models. */ static int -pci_hp_diva_setup(struct serial_private *priv, struct pciserial_board *board, - struct uart_port *port, int idx) +pci_hp_diva_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) { unsigned int offset = board->first_offset; unsigned int bar = FL_GET_BASE(board->flags); @@ -306,7 +308,7 @@ static void __devexit pci_plx9050_exit(struct pci_dev *dev) /* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */ static int -sbs_setup(struct serial_private *priv, struct pciserial_board *board, +sbs_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_port *port, int idx) { unsigned int bar, offset = board->first_offset; @@ -463,7 +465,7 @@ static int pci_siig_init(struct pci_dev *dev) } static int pci_siig_setup(struct serial_private *priv, - struct pciserial_board *board, + const struct pciserial_board *board, struct uart_port *port, int idx) { unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0; @@ -534,7 +536,8 @@ static int pci_timedia_init(struct pci_dev *dev) * Ugh, this is ugly as all hell --- TYT */ static int -pci_timedia_setup(struct serial_private *priv, struct pciserial_board *board, +pci_timedia_setup(struct serial_private *priv, + const struct pciserial_board *board, struct uart_port *port, int idx) { unsigned int bar = 0, offset = board->first_offset; @@ -568,7 +571,7 @@ pci_timedia_setup(struct serial_private *priv, struct pciserial_board *board, */ static int titan_400l_800l_setup(struct serial_private *priv, - struct pciserial_board *board, + const struct pciserial_board *board, struct uart_port *port, int idx) { unsigned int bar, offset = board->first_offset; @@ -737,8 +740,41 @@ static void __devexit pci_ite887x_exit(struct pci_dev *dev) release_region(ioport, ITE_887x_IOSIZE); } +/* + * Oxford Semiconductor Inc. + * Check that device is part of the Tornado range of devices, then determine + * the number of ports available on the device. + */ +static int pci_oxsemi_tornado_init(struct pci_dev *dev) +{ + u8 __iomem *p; + unsigned long deviceID; + unsigned int number_uarts = 0; + + /* OxSemi Tornado devices are all 0xCxxx */ + if (dev->vendor == PCI_VENDOR_ID_OXSEMI && + (dev->device & 0xF000) != 0xC000) + return 0; + + p = pci_iomap(dev, 0, 5); + if (p == NULL) + return -ENOMEM; + + deviceID = ioread32(p); + /* Tornado device */ + if (deviceID == 0x07000200) { + number_uarts = ioread8(p + 4); + printk(KERN_DEBUG + "%d ports detected on Oxford PCI Express device\n", + number_uarts); + } + pci_iounmap(dev, p); + return number_uarts; +} + static int -pci_default_setup(struct serial_private *priv, struct pciserial_board *board, +pci_default_setup(struct serial_private *priv, + const struct pciserial_board *board, struct uart_port *port, int idx) { unsigned int bar, offset = board->first_offset, maxnr; @@ -1018,6 +1054,25 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .setup = pci_default_setup, }, /* + * For Oxford Semiconductor and Mainpine + */ + { + .vendor = PCI_VENDOR_ID_OXSEMI, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_oxsemi_tornado_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_MAINPINE, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_oxsemi_tornado_init, + .setup = pci_default_setup, + }, + /* * Default "match everything" terminator entry */ { @@ -1048,7 +1103,7 @@ static struct pci_serial_quirk *find_quirk(struct pci_dev *dev) } static inline int get_pci_irq(struct pci_dev *dev, - struct pciserial_board *board) + const struct pciserial_board *board) { if (board->flags & FL_NOIRQ) return 0; @@ -1843,8 +1898,8 @@ serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) } static inline int -serial_pci_matches(struct pciserial_board *board, - struct pciserial_board *guessed) +serial_pci_matches(const struct pciserial_board *board, + const struct pciserial_board *guessed) { return board->num_ports == guessed->num_ports && @@ -1854,54 +1909,14 @@ serial_pci_matches(struct pciserial_board *board, board->first_offset == guessed->first_offset; } -/* - * Oxford Semiconductor Inc. - * Check that device is part of the Tornado range of devices, then determine - * the number of ports available on the device. - */ -static int pci_oxsemi_tornado_init(struct pci_dev *dev, struct pciserial_board *board) -{ - u8 __iomem *p; - unsigned long deviceID; - unsigned int number_uarts; - - /* OxSemi Tornado devices are all 0xCxxx */ - if (dev->vendor == PCI_VENDOR_ID_OXSEMI && - (dev->device & 0xF000) != 0xC000) - return 0; - - p = pci_iomap(dev, 0, 5); - if (p == NULL) - return -ENOMEM; - - deviceID = ioread32(p); - /* Tornado device */ - if (deviceID == 0x07000200) { - number_uarts = ioread8(p + 4); - board->num_ports = number_uarts; - printk(KERN_DEBUG - "%d ports detected on Oxford PCI Express device\n", - number_uarts); - } - pci_iounmap(dev, p); - return 0; -} - struct serial_private * -pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board) +pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) { struct uart_port serial_port; struct serial_private *priv; struct pci_serial_quirk *quirk; int rc, nr_ports, i; - /* - * Find number of ports on board - */ - if (dev->vendor == PCI_VENDOR_ID_OXSEMI || - dev->vendor == PCI_VENDOR_ID_MAINPINE) - pci_oxsemi_tornado_init(dev, board); - nr_ports = board->num_ports; /* @@ -2028,7 +2043,8 @@ static int __devinit pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) { struct serial_private *priv; - struct pciserial_board *board, tmp; + const struct pciserial_board *board; + struct pciserial_board tmp; int rc; if (ent->driver_data >= ARRAY_SIZE(pci_boards)) { @@ -2055,7 +2071,7 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) * We matched one of our class entries. Try to * determine the parameters of this board. */ - rc = serial_pci_guess_board(dev, board); + rc = serial_pci_guess_board(dev, &tmp); if (rc) goto disable; } else { @@ -2271,6 +2287,9 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_8_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_7803, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_460800 }, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_8_115200 }, @@ -2372,6 +2391,9 @@ static struct pci_device_id serial_pci_tbl[] = { * For now just used the hex ID 0x950a. */ { PCI_VENDOR_ID_OXSEMI, 0x950a, + PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL, 0, 0, + pbn_b0_2_115200 }, + { PCI_VENDOR_ID_OXSEMI, 0x950a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_2_1130000 }, { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 569f0e2476c6..318d69dce8e1 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -22,7 +22,8 @@ #include <linux/tty_flip.h> #include <linux/serial_core.h> -#ifdef CONFIG_KGDB_UART +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) #include <linux/kgdb.h> #include <asm/irq_regs.h> #endif @@ -45,6 +46,16 @@ static struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; static int nr_active_ports = ARRAY_SIZE(bfin_serial_resource); +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + +# ifndef CONFIG_SERIAL_BFIN_PIO +# error KGDB only support UART in PIO mode. +# endif + +static int kgdboc_port_line; +static int kgdboc_break_enabled; +#endif /* * Setup for console. Argument comes from the menuconfig */ @@ -62,13 +73,17 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart); static void bfin_serial_mctrl_check(struct bfin_serial_port *uart); +static void bfin_serial_reset_irda(struct uart_port *port); + /* * interrupts are disabled on entry */ static void bfin_serial_stop_tx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; +#ifdef CONFIG_SERIAL_BFIN_DMA struct circ_buf *xmit = &uart->port.info->xmit; +#endif while (!(UART_GET_LSR(uart) & TEMT)) cpu_relax(); @@ -94,6 +109,14 @@ static void bfin_serial_stop_tx(struct uart_port *port) static void bfin_serial_start_tx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + struct tty_struct *tty = uart->port.info->port.tty; + + /* + * To avoid losting RX interrupt, we reset IR function + * before sending data. + */ + if (tty->termios->c_line == N_IRDA) + bfin_serial_reset_irda(port); #ifdef CONFIG_SERIAL_BFIN_DMA if (uart->tx_done) @@ -110,9 +133,7 @@ static void bfin_serial_start_tx(struct uart_port *port) static void bfin_serial_stop_rx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; -#ifdef CONFIG_KGDB_UART - if (uart->port.line != CONFIG_KGDB_UART_PORT) -#endif + UART_CLEAR_IER(uart, ERBFI); } @@ -123,49 +144,6 @@ static void bfin_serial_enable_ms(struct uart_port *port) { } -#ifdef CONFIG_KGDB_UART -static int kgdb_entry_state; - -void kgdb_put_debug_char(int chr) -{ - struct bfin_serial_port *uart; - - if (CONFIG_KGDB_UART_PORT < 0 - || CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS) - uart = &bfin_serial_ports[0]; - else - uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT]; - - while (!(UART_GET_LSR(uart) & THRE)) { - SSYNC(); - } - - UART_CLEAR_DLAB(uart); - UART_PUT_CHAR(uart, (unsigned char)chr); - SSYNC(); -} - -int kgdb_get_debug_char(void) -{ - struct bfin_serial_port *uart; - unsigned char chr; - - if (CONFIG_KGDB_UART_PORT < 0 - || CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS) - uart = &bfin_serial_ports[0]; - else - uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT]; - - while(!(UART_GET_LSR(uart) & DR)) { - SSYNC(); - } - UART_CLEAR_DLAB(uart); - chr = UART_GET_CHAR(uart); - SSYNC(); - - return chr; -} -#endif #if ANOMALY_05000363 && defined(CONFIG_SERIAL_BFIN_PIO) # define UART_GET_ANOMALY_THRESHOLD(uart) ((uart)->anomaly_threshold) @@ -178,7 +156,7 @@ int kgdb_get_debug_char(void) #ifdef CONFIG_SERIAL_BFIN_PIO static void bfin_serial_rx_chars(struct bfin_serial_port *uart) { - struct tty_struct *tty = uart->port.info->port.tty; + struct tty_struct *tty = NULL; unsigned int status, ch, flg; static struct timeval anomaly_start = { .tv_sec = 0 }; @@ -188,27 +166,18 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) ch = UART_GET_CHAR(uart); uart->port.icount.rx++; -#ifdef CONFIG_KGDB_UART - if (uart->port.line == CONFIG_KGDB_UART_PORT) { - struct pt_regs *regs = get_irq_regs(); - if (uart->port.cons->index == CONFIG_KGDB_UART_PORT && ch == 0x1) { /* Ctrl + A */ - kgdb_breakkey_pressed(regs); - return; - } else if (kgdb_entry_state == 0 && ch == '$') {/* connection from KGDB */ - kgdb_entry_state = 1; - } else if (kgdb_entry_state == 1 && ch == 'q') { - kgdb_entry_state = 0; - kgdb_breakkey_pressed(regs); - return; - } else if (ch == 0x3) {/* Ctrl + C */ - kgdb_entry_state = 0; - kgdb_breakkey_pressed(regs); +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + if (kgdb_connected && kgdboc_port_line == uart->port.line) + if (ch == 0x3) {/* Ctrl + C */ + kgdb_breakpoint(); return; - } else { - kgdb_entry_state = 0; } - } + + if (!uart->port.info || !uart->port.info->tty) + return; #endif + tty = uart->port.info->tty; if (ANOMALY_05000363) { /* The BF533 (and BF561) family of processors have a nice anomaly @@ -250,6 +219,7 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) return; known_good_char: + status &= ~BI; anomaly_start.tv_sec = 0; } } @@ -445,7 +415,9 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) { - int x_pos, pos; + int x_pos, pos, flags; + + spin_lock_irqsave(&uart->port.lock, flags); uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); x_pos = get_dma_curr_xcount(uart->rx_dma_channel); @@ -463,6 +435,8 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) uart->rx_dma_buf.tail = uart->rx_dma_buf.head; } + spin_unlock_irqrestore(&uart->port.lock, flags); + mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES); } @@ -497,10 +471,9 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) spin_lock(&uart->port.lock); irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); clear_dma_irqstat(uart->rx_dma_channel); + bfin_serial_dma_rx_chars(uart); spin_unlock(&uart->port.lock); - mod_timer(&(uart->rx_dma_timer), jiffies); - return IRQ_HANDLED; } #endif @@ -630,16 +603,16 @@ static int bfin_serial_startup(struct uart_port *port) uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES; add_timer(&(uart->rx_dma_timer)); #else +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + if (kgdboc_port_line == uart->port.line && kgdboc_break_enabled) + kgdboc_break_enabled = 0; + else { +# endif if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED, "BFIN_UART_RX", uart)) { -# ifdef CONFIG_KGDB_UART - if (uart->port.line != CONFIG_KGDB_UART_PORT) { -# endif printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n"); return -EBUSY; -# ifdef CONFIG_KGDB_UART - } -# endif } if (request_irq @@ -685,6 +658,10 @@ static int bfin_serial_startup(struct uart_port *port) } } # endif +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + } +# endif #endif UART_SET_IER(uart, ERBFI); return 0; @@ -716,9 +693,6 @@ static void bfin_serial_shutdown(struct uart_port *port) break; }; #endif -#ifdef CONFIG_KGDB_UART - if (uart->port.line != CONFIG_KGDB_UART_PORT) -#endif free_irq(uart->port.irq, uart); free_irq(uart->port.irq+1, uart); #endif @@ -887,6 +861,65 @@ static void bfin_serial_set_ldisc(struct uart_port *port) } } +#ifdef CONFIG_CONSOLE_POLL +static void bfin_serial_poll_put_char(struct uart_port *port, unsigned char chr) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + + while (!(UART_GET_LSR(uart) & THRE)) + cpu_relax(); + + UART_CLEAR_DLAB(uart); + UART_PUT_CHAR(uart, (unsigned char)chr); +} + +static int bfin_serial_poll_get_char(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + unsigned char chr; + + while (!(UART_GET_LSR(uart) & DR)) + cpu_relax(); + + UART_CLEAR_DLAB(uart); + chr = UART_GET_CHAR(uart); + + return chr; +} +#endif + +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) +static void bfin_kgdboc_port_shutdown(struct uart_port *port) +{ + if (kgdboc_break_enabled) { + kgdboc_break_enabled = 0; + bfin_serial_shutdown(port); + } +} + +static int bfin_kgdboc_port_startup(struct uart_port *port) +{ + kgdboc_port_line = port->line; + kgdboc_break_enabled = !bfin_serial_startup(port); + return 0; +} +#endif + +static void bfin_serial_reset_irda(struct uart_port *port) +{ + int line = port->line; + unsigned short val; + + val = UART_GET_GCTL(&bfin_serial_ports[line]); + val &= ~(IREN | RPOLC); + UART_PUT_GCTL(&bfin_serial_ports[line], val); + SSYNC(); + val |= (IREN | RPOLC); + UART_PUT_GCTL(&bfin_serial_ports[line], val); + SSYNC(); +} + static struct uart_ops bfin_serial_pops = { .tx_empty = bfin_serial_tx_empty, .set_mctrl = bfin_serial_set_mctrl, @@ -905,6 +938,15 @@ static struct uart_ops bfin_serial_pops = { .request_port = bfin_serial_request_port, .config_port = bfin_serial_config_port, .verify_port = bfin_serial_verify_port, +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + .kgdboc_port_startup = bfin_kgdboc_port_startup, + .kgdboc_port_shutdown = bfin_kgdboc_port_shutdown, +#endif +#ifdef CONFIG_CONSOLE_POLL + .poll_put_char = bfin_serial_poll_put_char, + .poll_get_char = bfin_serial_poll_get_char, +#endif }; static void __init bfin_serial_init_ports(void) @@ -950,7 +992,7 @@ static void __init bfin_serial_init_ports(void) } -#ifdef CONFIG_SERIAL_BFIN_CONSOLE +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) /* * If the port was already initialised (eg, by a boot loader), * try to determine the current setup. @@ -994,24 +1036,20 @@ bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud, } pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __func__, *baud, *parity, *bits); } -#endif -#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) static struct uart_driver bfin_serial_reg; static int __init bfin_serial_console_setup(struct console *co, char *options) { struct bfin_serial_port *uart; -# ifdef CONFIG_SERIAL_BFIN_CONSOLE int baud = 57600; int bits = 8; int parity = 'n'; -# ifdef CONFIG_SERIAL_BFIN_CTSRTS +# ifdef CONFIG_SERIAL_BFIN_CTSRTS int flow = 'r'; -# else +# else int flow = 'n'; -# endif # endif /* @@ -1023,16 +1061,12 @@ bfin_serial_console_setup(struct console *co, char *options) co->index = 0; uart = &bfin_serial_ports[co->index]; -# ifdef CONFIG_SERIAL_BFIN_CONSOLE if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); else bfin_serial_console_get_options(uart, &baud, &parity, &bits); return uart_set_options(&uart->port, co, baud, parity, bits, flow); -# else - return 0; -# endif } #endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) || defined (CONFIG_EARLY_PRINTK) */ @@ -1076,10 +1110,7 @@ static int __init bfin_serial_rs_console_init(void) { bfin_serial_init_ports(); register_console(&bfin_serial_console); -#ifdef CONFIG_KGDB_UART - kgdb_entry_state = 0; - init_kgdb_uart(); -#endif + return 0; } console_initcall(bfin_serial_rs_console_init); @@ -1144,7 +1175,7 @@ struct console __init *bfin_earlyserial_init(unsigned int port, return &bfin_early_serial_console; } -#endif /* CONFIG_SERIAL_BFIN_CONSOLE */ +#endif /* CONFIG_EARLY_PRINTK */ static struct uart_driver bfin_serial_reg = { .owner = THIS_MODULE, @@ -1235,10 +1266,6 @@ static struct platform_driver bfin_serial_driver = { static int __init bfin_serial_init(void) { int ret; -#ifdef CONFIG_KGDB_UART - struct bfin_serial_port *uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT]; - struct ktermios t; -#endif pr_info("Serial: Blackfin serial driver\n"); @@ -1252,21 +1279,6 @@ static int __init bfin_serial_init(void) uart_unregister_driver(&bfin_serial_reg); } } -#ifdef CONFIG_KGDB_UART - if (uart->port.cons->index != CONFIG_KGDB_UART_PORT) { - request_irq(uart->port.irq, bfin_serial_rx_int, - IRQF_DISABLED, "BFIN_UART_RX", uart); - pr_info("Request irq for kgdb uart port\n"); - UART_SET_IER(uart, ERBFI); - SSYNC(); - t.c_cflag = CS8|B57600; - t.c_iflag = 0; - t.c_oflag = 0; - t.c_lflag = ICANON; - t.c_line = CONFIG_KGDB_UART_PORT; - bfin_serial_set_termios(&uart->port, &t, &t); - } -#endif return ret; } @@ -1276,6 +1288,7 @@ static void __exit bfin_serial_exit(void) uart_unregister_driver(&bfin_serial_reg); } + module_init(bfin_serial_init); module_exit(bfin_serial_exit); diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c index dd8564d25051..529c0ff7952c 100644 --- a/drivers/serial/bfin_sport_uart.c +++ b/drivers/serial/bfin_sport_uart.c @@ -99,7 +99,7 @@ static void sport_stop_tx(struct uart_port *port); static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value) { - pr_debug("%s value:%x\n", __FUNCTION__, value); + pr_debug("%s value:%x\n", __func__, value); /* Place a Start and Stop bit */ __asm__ volatile ( "R2 = b#01111111100;\n\t" @@ -110,7 +110,7 @@ static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value) :"=r"(value) :"0"(value) :"R2", "R3"); - pr_debug("%s value:%x\n", __FUNCTION__, value); + pr_debug("%s value:%x\n", __func__, value); SPORT_PUT_TX(up, value); } @@ -120,7 +120,7 @@ static inline unsigned int rx_one_byte(struct sport_uart_port *up) unsigned int value, extract; value = SPORT_GET_RX32(up); - pr_debug("%s value:%x\n", __FUNCTION__, value); + pr_debug("%s value:%x\n", __func__, value); /* Extract 8 bits data */ __asm__ volatile ( @@ -151,12 +151,12 @@ static int sport_uart_setup(struct sport_uart_port *up, int sclk, int baud_rate) /* Set TCR1 and TCR2 */ SPORT_PUT_TCR1(up, (LTFS | ITFS | TFSR | TLSBIT | ITCLK)); SPORT_PUT_TCR2(up, 10); - pr_debug("%s TCR1:%x, TCR2:%x\n", __FUNCTION__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up)); + pr_debug("%s TCR1:%x, TCR2:%x\n", __func__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up)); /* Set RCR1 and RCR2 */ SPORT_PUT_RCR1(up, (RCKFE | LARFS | LRFS | RFSR | IRCLK)); SPORT_PUT_RCR2(up, 28); - pr_debug("%s RCR1:%x, RCR2:%x\n", __FUNCTION__, SPORT_GET_RCR1(up), SPORT_GET_RCR2(up)); + pr_debug("%s RCR1:%x, RCR2:%x\n", __func__, SPORT_GET_RCR1(up), SPORT_GET_RCR2(up)); tclkdiv = sclk/(2 * baud_rate) - 1; tfsdiv = 12; @@ -166,7 +166,7 @@ static int sport_uart_setup(struct sport_uart_port *up, int sclk, int baud_rate) SPORT_PUT_RCLKDIV(up, rclkdiv); SSYNC(); pr_debug("%s sclk:%d, baud_rate:%d, tclkdiv:%d, tfsdiv:%d, rclkdiv:%d\n", - __FUNCTION__, sclk, baud_rate, tclkdiv, tfsdiv, rclkdiv); + __func__, sclk, baud_rate, tclkdiv, tfsdiv, rclkdiv); return 0; } @@ -231,7 +231,7 @@ static int sport_startup(struct uart_port *port) char buffer[20]; int retval; - pr_debug("%s enter\n", __FUNCTION__); + pr_debug("%s enter\n", __func__); memset(buffer, 20, '\0'); snprintf(buffer, 20, "%s rx", up->name); retval = request_irq(up->rx_irq, sport_uart_rx_irq, IRQF_SAMPLE_RANDOM, buffer, up); @@ -320,7 +320,7 @@ static unsigned int sport_tx_empty(struct uart_port *port) unsigned int stat; stat = SPORT_GET_STAT(up); - pr_debug("%s stat:%04x\n", __FUNCTION__, stat); + pr_debug("%s stat:%04x\n", __func__, stat); if (stat & TXHRE) { return TIOCSER_TEMT; } else @@ -329,13 +329,13 @@ static unsigned int sport_tx_empty(struct uart_port *port) static unsigned int sport_get_mctrl(struct uart_port *port) { - pr_debug("%s enter\n", __FUNCTION__); + pr_debug("%s enter\n", __func__); return (TIOCM_CTS | TIOCM_CD | TIOCM_DSR); } static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl) { - pr_debug("%s enter\n", __FUNCTION__); + pr_debug("%s enter\n", __func__); } static void sport_stop_tx(struct uart_port *port) @@ -343,7 +343,7 @@ static void sport_stop_tx(struct uart_port *port) struct sport_uart_port *up = (struct sport_uart_port *)port; unsigned int stat; - pr_debug("%s enter\n", __FUNCTION__); + pr_debug("%s enter\n", __func__); stat = SPORT_GET_STAT(up); while(!(stat & TXHRE)) { @@ -366,21 +366,21 @@ static void sport_start_tx(struct uart_port *port) { struct sport_uart_port *up = (struct sport_uart_port *)port; - pr_debug("%s enter\n", __FUNCTION__); + pr_debug("%s enter\n", __func__); /* Write data into SPORT FIFO before enable SPROT to transmit */ sport_uart_tx_chars(up); /* Enable transmit, then an interrupt will generated */ SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN)); SSYNC(); - pr_debug("%s exit\n", __FUNCTION__); + pr_debug("%s exit\n", __func__); } static void sport_stop_rx(struct uart_port *port) { struct sport_uart_port *up = (struct sport_uart_port *)port; - pr_debug("%s enter\n", __FUNCTION__); + pr_debug("%s enter\n", __func__); /* Disable sport to stop rx */ SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN)); SSYNC(); @@ -388,19 +388,19 @@ static void sport_stop_rx(struct uart_port *port) static void sport_enable_ms(struct uart_port *port) { - pr_debug("%s enter\n", __FUNCTION__); + pr_debug("%s enter\n", __func__); } static void sport_break_ctl(struct uart_port *port, int break_state) { - pr_debug("%s enter\n", __FUNCTION__); + pr_debug("%s enter\n", __func__); } static void sport_shutdown(struct uart_port *port) { struct sport_uart_port *up = (struct sport_uart_port *)port; - pr_debug("%s enter\n", __FUNCTION__); + pr_debug("%s enter\n", __func__); /* Disable sport */ SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); @@ -421,7 +421,7 @@ static void sport_shutdown(struct uart_port *port) static void sport_set_termios(struct uart_port *port, struct termios *termios, struct termios *old) { - pr_debug("%s enter, c_cflag:%08x\n", __FUNCTION__, termios->c_cflag); + pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag); uart_update_timeout(port, CS8 ,port->uartclk); } @@ -429,18 +429,18 @@ static const char *sport_type(struct uart_port *port) { struct sport_uart_port *up = (struct sport_uart_port *)port; - pr_debug("%s enter\n", __FUNCTION__); + pr_debug("%s enter\n", __func__); return up->name; } static void sport_release_port(struct uart_port *port) { - pr_debug("%s enter\n", __FUNCTION__); + pr_debug("%s enter\n", __func__); } static int sport_request_port(struct uart_port *port) { - pr_debug("%s enter\n", __FUNCTION__); + pr_debug("%s enter\n", __func__); return 0; } @@ -448,13 +448,13 @@ static void sport_config_port(struct uart_port *port, int flags) { struct sport_uart_port *up = (struct sport_uart_port *)port; - pr_debug("%s enter\n", __FUNCTION__); + pr_debug("%s enter\n", __func__); up->port.type = PORT_BFIN_SPORT; } static int sport_verify_port(struct uart_port *port, struct serial_struct *ser) { - pr_debug("%s enter\n", __FUNCTION__); + pr_debug("%s enter\n", __func__); return 0; } @@ -527,7 +527,7 @@ static int sport_uart_suspend(struct platform_device *dev, pm_message_t state) { struct sport_uart_port *sport = platform_get_drvdata(dev); - pr_debug("%s enter\n", __FUNCTION__); + pr_debug("%s enter\n", __func__); if (sport) uart_suspend_port(&sport_uart_reg, &sport->port); @@ -538,7 +538,7 @@ static int sport_uart_resume(struct platform_device *dev) { struct sport_uart_port *sport = platform_get_drvdata(dev); - pr_debug("%s enter\n", __FUNCTION__); + pr_debug("%s enter\n", __func__); if (sport) uart_resume_port(&sport_uart_reg, &sport->port); @@ -547,7 +547,7 @@ static int sport_uart_resume(struct platform_device *dev) static int sport_uart_probe(struct platform_device *dev) { - pr_debug("%s enter\n", __FUNCTION__); + pr_debug("%s enter\n", __func__); sport_uart_ports[dev->id].port.dev = &dev->dev; uart_add_one_port(&sport_uart_reg, &sport_uart_ports[dev->id].port); platform_set_drvdata(dev, &sport_uart_ports[dev->id]); @@ -559,7 +559,7 @@ static int sport_uart_remove(struct platform_device *dev) { struct sport_uart_port *sport = platform_get_drvdata(dev); - pr_debug("%s enter\n", __FUNCTION__); + pr_debug("%s enter\n", __func__); platform_set_drvdata(dev, NULL); if (sport) @@ -582,7 +582,7 @@ static int __init sport_uart_init(void) { int ret; - pr_debug("%s enter\n", __FUNCTION__); + pr_debug("%s enter\n", __func__); ret = uart_register_driver(&sport_uart_reg); if (ret != 0) { printk(KERN_ERR "Failed to register %s:%d\n", @@ -597,13 +597,13 @@ static int __init sport_uart_init(void) } - pr_debug("%s exit\n", __FUNCTION__); + pr_debug("%s exit\n", __func__); return ret; } static void __exit sport_uart_exit(void) { - pr_debug("%s enter\n", __FUNCTION__); + pr_debug("%s enter\n", __func__); platform_driver_unregister(&sport_uart_driver); uart_unregister_driver(&sport_uart_reg); } diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c index a697914ae3d0..3547558d2caf 100644 --- a/drivers/serial/jsm/jsm_tty.c +++ b/drivers/serial/jsm/jsm_tty.c @@ -272,7 +272,7 @@ static void jsm_tty_close(struct uart_port *port) jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n"); bd = channel->ch_bd; - ts = channel->uart_port.info->port.tty->termios; + ts = port->info->port.tty->termios; channel->ch_flags &= ~(CH_STOPI); diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 874786a11fe9..dc68b7e0c930 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -50,7 +50,7 @@ static struct lock_class_key port_lock_key; #define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) -#define uart_users(state) ((state)->count + ((state)->info ? (state)->info->port.blocked_open : 0)) +#define uart_users(state) ((state)->count + (state)->info.port.blocked_open) #ifdef CONFIG_SERIAL_CORE_CONSOLE #define uart_console(port) ((port)->cons && (port)->cons->index == (port)->line) @@ -94,7 +94,7 @@ static void __uart_start(struct tty_struct *tty) struct uart_state *state = tty->driver_data; struct uart_port *port = state->port; - if (!uart_circ_empty(&state->info->xmit) && state->info->xmit.buf && + if (!uart_circ_empty(&state->info.xmit) && state->info.xmit.buf && !tty->stopped && !tty->hw_stopped) port->ops->start_tx(port); } @@ -113,7 +113,7 @@ static void uart_start(struct tty_struct *tty) static void uart_tasklet_action(unsigned long data) { struct uart_state *state = (struct uart_state *)data; - tty_wakeup(state->info->port.tty); + tty_wakeup(state->info.port.tty); } static inline void @@ -139,7 +139,7 @@ uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear) */ static int uart_startup(struct uart_state *state, int init_hw) { - struct uart_info *info = state->info; + struct uart_info *info = &state->info; struct uart_port *port = state->port; unsigned long page; int retval = 0; @@ -212,14 +212,15 @@ static int uart_startup(struct uart_state *state, int init_hw) */ static void uart_shutdown(struct uart_state *state) { - struct uart_info *info = state->info; + struct uart_info *info = &state->info; struct uart_port *port = state->port; + struct tty_struct *tty = info->port.tty; /* * Set the TTY IO error marker */ - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); + if (tty) + set_bit(TTY_IO_ERROR, &tty->flags); if (info->flags & UIF_INITIALIZED) { info->flags &= ~UIF_INITIALIZED; @@ -227,7 +228,7 @@ static void uart_shutdown(struct uart_state *state) /* * Turn off DTR and RTS early. */ - if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) + if (!tty || (tty->termios->c_cflag & HUPCL)) uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); /* @@ -427,7 +428,7 @@ EXPORT_SYMBOL(uart_get_divisor); static void uart_change_speed(struct uart_state *state, struct ktermios *old_termios) { - struct tty_struct *tty = state->info->port.tty; + struct tty_struct *tty = state->info.port.tty; struct uart_port *port = state->port; struct ktermios *termios; @@ -444,14 +445,14 @@ uart_change_speed(struct uart_state *state, struct ktermios *old_termios) * Set flags based on termios cflag */ if (termios->c_cflag & CRTSCTS) - state->info->flags |= UIF_CTS_FLOW; + state->info.flags |= UIF_CTS_FLOW; else - state->info->flags &= ~UIF_CTS_FLOW; + state->info.flags &= ~UIF_CTS_FLOW; if (termios->c_cflag & CLOCAL) - state->info->flags &= ~UIF_CHECK_CD; + state->info.flags &= ~UIF_CHECK_CD; else - state->info->flags |= UIF_CHECK_CD; + state->info.flags |= UIF_CHECK_CD; port->ops->set_termios(port, termios, old_termios); } @@ -479,7 +480,7 @@ static int uart_put_char(struct tty_struct *tty, unsigned char ch) { struct uart_state *state = tty->driver_data; - return __uart_put_char(state->port, &state->info->xmit, ch); + return __uart_put_char(state->port, &state->info.xmit, ch); } static void uart_flush_chars(struct tty_struct *tty) @@ -500,13 +501,13 @@ uart_write(struct tty_struct *tty, const unsigned char *buf, int count) * This means you called this function _after_ the port was * closed. No cookie for you. */ - if (!state || !state->info) { + if (!state) { WARN_ON(1); return -EL3HLT; } port = state->port; - circ = &state->info->xmit; + circ = &state->info.xmit; if (!circ->buf) return 0; @@ -537,7 +538,7 @@ static int uart_write_room(struct tty_struct *tty) int ret; spin_lock_irqsave(&state->port->lock, flags); - ret = uart_circ_chars_free(&state->info->xmit); + ret = uart_circ_chars_free(&state->info.xmit); spin_unlock_irqrestore(&state->port->lock, flags); return ret; } @@ -549,7 +550,7 @@ static int uart_chars_in_buffer(struct tty_struct *tty) int ret; spin_lock_irqsave(&state->port->lock, flags); - ret = uart_circ_chars_pending(&state->info->xmit); + ret = uart_circ_chars_pending(&state->info.xmit); spin_unlock_irqrestore(&state->port->lock, flags); return ret; } @@ -564,7 +565,7 @@ static void uart_flush_buffer(struct tty_struct *tty) * This means you called this function _after_ the port was * closed. No cookie for you. */ - if (!state || !state->info) { + if (!state) { WARN_ON(1); return; } @@ -573,7 +574,7 @@ static void uart_flush_buffer(struct tty_struct *tty) pr_debug("uart_flush_buffer(%d) called\n", tty->index); spin_lock_irqsave(&port->lock, flags); - uart_circ_clear(&state->info->xmit); + uart_circ_clear(&state->info.xmit); if (port->ops->flush_buffer) port->ops->flush_buffer(port); spin_unlock_irqrestore(&port->lock, flags); @@ -837,15 +838,15 @@ static int uart_set_info(struct uart_state *state, state->closing_wait = closing_wait; if (new_serial.xmit_fifo_size) port->fifosize = new_serial.xmit_fifo_size; - if (state->info->port.tty) - state->info->port.tty->low_latency = + if (state->info.port.tty) + state->info.port.tty->low_latency = (port->flags & UPF_LOW_LATENCY) ? 1 : 0; check_and_exit: retval = 0; if (port->type == PORT_UNKNOWN) goto exit; - if (state->info->flags & UIF_INITIALIZED) { + if (state->info.flags & UIF_INITIALIZED) { if (((old_flags ^ port->flags) & UPF_SPD_MASK) || old_custom_divisor != port->custom_divisor) { /* @@ -858,7 +859,7 @@ static int uart_set_info(struct uart_state *state, printk(KERN_NOTICE "%s sets custom speed on %s. This " "is deprecated.\n", current->comm, - tty_name(state->info->port.tty, buf)); + tty_name(state->info.port.tty, buf)); } uart_change_speed(state, NULL); } @@ -889,8 +890,8 @@ static int uart_get_lsr_info(struct uart_state *state, * interrupt happens). */ if (port->x_char || - ((uart_circ_chars_pending(&state->info->xmit) > 0) && - !state->info->port.tty->stopped && !state->info->port.tty->hw_stopped)) + ((uart_circ_chars_pending(&state->info.xmit) > 0) && + !state->info.port.tty->stopped && !state->info.port.tty->hw_stopped)) result &= ~TIOCSER_TEMT; return put_user(result, value); @@ -1017,7 +1018,7 @@ uart_wait_modem_status(struct uart_state *state, unsigned long arg) port->ops->enable_ms(port); spin_unlock_irq(&port->lock); - add_wait_queue(&state->info->delta_msr_wait, &wait); + add_wait_queue(&state->info.delta_msr_wait, &wait); for (;;) { spin_lock_irq(&port->lock); memcpy(&cnow, &port->icount, sizeof(struct uart_icount)); @@ -1045,7 +1046,7 @@ uart_wait_modem_status(struct uart_state *state, unsigned long arg) } current->state = TASK_RUNNING; - remove_wait_queue(&state->info->delta_msr_wait, &wait); + remove_wait_queue(&state->info.delta_msr_wait, &wait); return ret; } @@ -1241,7 +1242,7 @@ static void uart_set_termios(struct tty_struct *tty, */ if (!(old_termios->c_cflag & CLOCAL) && (tty->termios->c_cflag & CLOCAL)) - wake_up_interruptible(&state->info->port.open_wait); + wake_up_interruptible(&info->port.open_wait); #endif } @@ -1303,7 +1304,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp) * At this point, we stop accepting input. To do this, we * disable the receive line status interrupts. */ - if (state->info->flags & UIF_INITIALIZED) { + if (state->info.flags & UIF_INITIALIZED) { unsigned long flags; spin_lock_irqsave(&port->lock, flags); port->ops->stop_rx(port); @@ -1322,9 +1323,9 @@ static void uart_close(struct tty_struct *tty, struct file *filp) tty_ldisc_flush(tty); tty->closing = 0; - state->info->port.tty = NULL; + state->info.port.tty = NULL; - if (state->info->port.blocked_open) { + if (state->info.port.blocked_open) { if (state->close_delay) msleep_interruptible(state->close_delay); } else if (!uart_console(port)) { @@ -1334,8 +1335,8 @@ static void uart_close(struct tty_struct *tty, struct file *filp) /* * Wake up anyone trying to open this port. */ - state->info->flags &= ~UIF_NORMAL_ACTIVE; - wake_up_interruptible(&state->info->port.open_wait); + state->info.flags &= ~UIF_NORMAL_ACTIVE; + wake_up_interruptible(&state->info.port.open_wait); done: mutex_unlock(&state->mutex); @@ -1409,19 +1410,20 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout) static void uart_hangup(struct tty_struct *tty) { struct uart_state *state = tty->driver_data; + struct uart_info *info = &state->info; BUG_ON(!kernel_locked()); pr_debug("uart_hangup(%d)\n", state->port->line); mutex_lock(&state->mutex); - if (state->info && state->info->flags & UIF_NORMAL_ACTIVE) { + if (info->flags & UIF_NORMAL_ACTIVE) { uart_flush_buffer(tty); uart_shutdown(state); state->count = 0; - state->info->flags &= ~UIF_NORMAL_ACTIVE; - state->info->port.tty = NULL; - wake_up_interruptible(&state->info->port.open_wait); - wake_up_interruptible(&state->info->delta_msr_wait); + info->flags &= ~UIF_NORMAL_ACTIVE; + info->port.tty = NULL; + wake_up_interruptible(&info->port.open_wait); + wake_up_interruptible(&info->delta_msr_wait); } mutex_unlock(&state->mutex); } @@ -1434,7 +1436,7 @@ static void uart_hangup(struct tty_struct *tty) */ static void uart_update_termios(struct uart_state *state) { - struct tty_struct *tty = state->info->port.tty; + struct tty_struct *tty = state->info.port.tty; struct uart_port *port = state->port; if (uart_console(port) && port->cons->cflag) { @@ -1469,7 +1471,7 @@ static int uart_block_til_ready(struct file *filp, struct uart_state *state) { DECLARE_WAITQUEUE(wait, current); - struct uart_info *info = state->info; + struct uart_info *info = &state->info; struct uart_port *port = state->port; unsigned int mctrl; @@ -1563,28 +1565,6 @@ static struct uart_state *uart_get(struct uart_driver *drv, int line) ret = -ENXIO; goto err_unlock; } - - /* BKL: RACE HERE - LEAK */ - /* We should move this into the uart_state structure and kill off - this whole complexity */ - if (!state->info) { - state->info = kzalloc(sizeof(struct uart_info), GFP_KERNEL); - if (state->info) { - init_waitqueue_head(&state->info->port.open_wait); - init_waitqueue_head(&state->info->delta_msr_wait); - - /* - * Link the info into the other structures. - */ - state->port->info = state->info; - - tasklet_init(&state->info->tlet, uart_tasklet_action, - (unsigned long)state); - } else { - ret = -ENOMEM; - goto err_unlock; - } - } return state; err_unlock: @@ -1641,9 +1621,10 @@ static int uart_open(struct tty_struct *tty, struct file *filp) * Any failures from here onwards should not touch the count. */ tty->driver_data = state; + state->port->info = &state->info; tty->low_latency = (state->port->flags & UPF_LOW_LATENCY) ? 1 : 0; tty->alt_speed = 0; - state->info->port.tty = tty; + state->info.port.tty = tty; /* * If the port is in the middle of closing, bail out now. @@ -1676,8 +1657,8 @@ static int uart_open(struct tty_struct *tty, struct file *filp) /* * If this is the first open to succeed, adjust things to suit. */ - if (retval == 0 && !(state->info->flags & UIF_NORMAL_ACTIVE)) { - state->info->flags |= UIF_NORMAL_ACTIVE; + if (retval == 0 && !(state->info.flags & UIF_NORMAL_ACTIVE)) { + state->info.flags |= UIF_NORMAL_ACTIVE; uart_update_termios(state); } @@ -2028,11 +2009,11 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port) } port->suspended = 1; - if (state->info && state->info->flags & UIF_INITIALIZED) { + if (state->info.flags & UIF_INITIALIZED) { const struct uart_ops *ops = port->ops; int tries; - state->info->flags = (state->info->flags & ~UIF_INITIALIZED) + state->info.flags = (state->info.flags & ~UIF_INITIALIZED) | UIF_SUSPENDED; spin_lock_irq(&port->lock); @@ -2107,15 +2088,15 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port) /* * If that's unset, use the tty termios setting. */ - if (state->info && state->info->port.tty && termios.c_cflag == 0) - termios = *state->info->port.tty->termios; + if (state->info.port.tty && termios.c_cflag == 0) + termios = *state->info.port.tty->termios; uart_change_pm(state, 0); port->ops->set_termios(port, &termios, NULL); console_start(port->cons); } - if (state->info && state->info->flags & UIF_SUSPENDED) { + if (state->info.flags & UIF_SUSPENDED) { const struct uart_ops *ops = port->ops; int ret; @@ -2130,7 +2111,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port) ops->set_mctrl(port, port->mctrl); ops->start_tx(port); spin_unlock_irq(&port->lock); - state->info->flags |= UIF_INITIALIZED; + state->info.flags |= UIF_INITIALIZED; } else { /* * Failed to resume - maybe hardware went away? @@ -2140,7 +2121,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port) uart_shutdown(state); } - state->info->flags &= ~UIF_SUSPENDED; + state->info.flags &= ~UIF_SUSPENDED; } mutex_unlock(&state->mutex); @@ -2198,11 +2179,14 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state, * Now do the auto configuration stuff. Note that config_port * is expected to claim the resources and map the port for us. */ - flags = UART_CONFIG_TYPE; + flags = 0; if (port->flags & UPF_AUTO_IRQ) flags |= UART_CONFIG_IRQ; if (port->flags & UPF_BOOT_AUTOCONF) { - port->type = PORT_UNKNOWN; + if (!(port->flags & UPF_FIXED_TYPE)) { + port->type = PORT_UNKNOWN; + flags |= UART_CONFIG_TYPE; + } port->ops->config_port(port, flags); } @@ -2383,8 +2367,12 @@ int uart_register_driver(struct uart_driver *drv) state->close_delay = 500; /* .5 seconds */ state->closing_wait = 30000; /* 30 seconds */ - mutex_init(&state->mutex); + + tty_port_init(&state->info.port); + init_waitqueue_head(&state->info.delta_msr_wait); + tasklet_init(&state->info.tlet, uart_tasklet_action, + (unsigned long)state); } retval = tty_register_driver(normal); @@ -2455,7 +2443,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port) state->pm_state = -1; port->cons = drv->cons; - port->info = state->info; + port->info = &state->info; /* * If this port is a console, then the spinlock is already @@ -2527,18 +2515,11 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port) */ tty_unregister_device(drv->tty_driver, port->line); - info = state->info; + info = &state->info; if (info && info->port.tty) tty_vhangup(info->port.tty); /* - * All users of this port should now be disconnected from - * this driver, and the port shut down. We should be the - * only thread fiddling with this port from now on. - */ - state->info = NULL; - - /* * Free the port IO and memory resources, if any. */ if (port->type != PORT_UNKNOWN) @@ -2552,10 +2533,8 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port) /* * Kill the tasklet, and free resources. */ - if (info) { + if (info) tasklet_kill(&info->tlet); - kfree(info); - } state->port = NULL; mutex_unlock(&port_mutex); diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 5b95009d2fbb..19e24045b137 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -241,12 +241,25 @@ static void usb_console_write(struct console *co, } } +static struct tty_driver *usb_console_device(struct console *co, int *index) +{ + struct tty_driver **p = (struct tty_driver **)co->data; + + if (!*p) + return NULL; + + *index = co->index; + return *p; +} + static struct console usbcons = { .name = "ttyUSB", .write = usb_console_write, + .device = usb_console_device, .setup = usb_console_setup, .flags = CON_PRINTBUFFER, .index = -1, + .data = &usb_serial_tty_driver, }; void usb_serial_console_disconnect(struct usb_serial *serial) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index fb6f2933b01b..ef6cfa5a447f 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1054,6 +1054,8 @@ static int set_serial_info(struct tty_struct *tty, if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) return -EFAULT; + + lock_kernel(); old_priv = *priv; /* Do error checking and permission checking */ @@ -1069,8 +1071,10 @@ static int set_serial_info(struct tty_struct *tty, } if ((new_serial.baud_base != priv->baud_base) && - (new_serial.baud_base < 9600)) + (new_serial.baud_base < 9600)) { + unlock_kernel(); return -EINVAL; + } /* Make the changes - these are privileged changes! */ @@ -1098,8 +1102,11 @@ check_and_exit: (priv->flags & ASYNC_SPD_MASK)) || (((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && (old_priv.custom_divisor != priv->custom_divisor))) { + unlock_kernel(); change_speed(tty, port); } + else + unlock_kernel(); return 0; } /* set_serial_info */ diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index dc36a052766f..fcd9082f3e7f 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -878,6 +878,7 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state) dbg("%sstate=%d", __func__, break_state); + /* LOCKING */ if (break_state) lcr |= MCT_U232_SET_BREAK; diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 07710cf31d0d..82930a7d5093 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -721,10 +721,10 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state) spin_lock_irqsave(&priv->lock, flags); lcr = priv->last_lcr; - spin_unlock_irqrestore(&priv->lock, flags); if (break_state) lcr |= MCT_U232_SET_BREAK; + spin_unlock_irqrestore(&priv->lock, flags); mct_u232_set_line_ctrl(serial, lcr); } /* mct_u232_break_ctl */ diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index fda4a6421c44..96a8c7713212 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1343,6 +1343,7 @@ static void mos7840_break(struct tty_struct *tty, int break_state) else data = mos7840_port->shadowLCR & ~LCR_SET_BREAK; + /* FIXME: no locking on shadowLCR anywhere in driver */ mos7840_port->shadowLCR = data; dbg("mcs7840_break mos7840_port->shadowLCR is %x\n", mos7840_port->shadowLCR); @@ -2214,10 +2215,12 @@ static int mos7840_set_modem_info(struct moschip_port *mos7840_port, break; } + lock_kernel(); mos7840_port->shadowMCR = mcr; Data = mos7840_port->shadowMCR; status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); + unlock_kernel(); if (status < 0) { dbg("setting MODEM_CONTROL_REGISTER Failed\n"); return -1; diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 0f2b67244af6..d9bf9a5c20ec 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -442,7 +442,7 @@ static void sierra_indat_callback(struct urb *urb) " endpoint %02x.", __func__, status, endpoint); } else { if (urb->actual_length) { - tty = tty_port_tty_get(&port->port); + tty = tty_port_tty_get(&port->port); tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 794b5ffe4397..080ade223d53 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -269,15 +269,19 @@ static void serial_close(struct tty_struct *tty, struct file *filp) return; } - --port->port.count; - if (port->port.count == 0) + if (port->port.count == 1) /* only call the device specific close if this - * port is being closed by the last owner */ + * port is being closed by the last owner. Ensure we do + * this before we drop the port count. The call is protected + * by the port mutex + */ port->serial->type->close(tty, port, filp); - if (port->port.count == (port->console? 1 : 0)) { + if (port->port.count == (port->console ? 2 : 1)) { struct tty_struct *tty = tty_port_tty_get(&port->port); if (tty) { + /* We must do this before we drop the port count to + zero. */ if (tty->driver_data) tty->driver_data = NULL; tty_port_tty_set(&port->port, NULL); @@ -285,13 +289,14 @@ static void serial_close(struct tty_struct *tty, struct file *filp) } } - if (port->port.count == 0) { + if (port->port.count == 1) { mutex_lock(&port->serial->disc_mutex); if (!port->serial->disconnected) usb_autopm_put_interface(port->serial->interface); mutex_unlock(&port->serial->disc_mutex); module_put(port->serial->type->driver.owner); } + --port->port.count; mutex_unlock(&port->mutex); usb_serial_put(port->serial); @@ -334,6 +339,10 @@ static int serial_chars_in_buffer(struct tty_struct *tty) dbg("%s = port %d", __func__, port->number); WARN_ON(!port->port.count); + /* if the device was unplugged then any remaining characters + fell out of the connector ;) */ + if (port->serial->disconnected) + return 0; /* pass on to the driver specific version of this function */ return port->serial->type->chars_in_buffer(tty); } @@ -373,9 +382,7 @@ static int serial_ioctl(struct tty_struct *tty, struct file *file, /* pass on to the driver specific version of this function if it is available */ if (port->serial->type->ioctl) { - lock_kernel(); retval = port->serial->type->ioctl(tty, file, cmd, arg); - unlock_kernel(); } else retval = -ENOIOCTLCMD; return retval; @@ -404,11 +411,8 @@ static int serial_break(struct tty_struct *tty, int break_state) WARN_ON(!port->port.count); /* pass on to the driver specific version of this function if it is available */ - if (port->serial->type->break_ctl) { - lock_kernel(); + if (port->serial->type->break_ctl) port->serial->type->break_ctl(tty, break_state); - unlock_kernel(); - } return 0; } diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c index 5d61b7c06e13..fff96e152c0c 100644 --- a/fs/devpts/inode.c +++ b/fs/devpts/inode.c @@ -27,25 +27,32 @@ #define DEVPTS_SUPER_MAGIC 0x1cd1 #define DEVPTS_DEFAULT_MODE 0600 +/* + * ptmx is a new node in /dev/pts and will be unused in legacy (single- + * instance) mode. To prevent surprises in user space, set permissions of + * ptmx to 0. Use 'chmod' or remount with '-o ptmxmode' to set meaningful + * permissions. + */ +#define DEVPTS_DEFAULT_PTMX_MODE 0000 #define PTMX_MINOR 2 extern int pty_limit; /* Config limit on Unix98 ptys */ -static DEFINE_IDA(allocated_ptys); static DEFINE_MUTEX(allocated_ptys_lock); static struct vfsmount *devpts_mnt; -static struct dentry *devpts_root; -static struct { +struct pts_mount_opts { int setuid; int setgid; uid_t uid; gid_t gid; umode_t mode; -} config = {.mode = DEVPTS_DEFAULT_MODE}; + umode_t ptmxmode; + int newinstance; +}; enum { - Opt_uid, Opt_gid, Opt_mode, + Opt_uid, Opt_gid, Opt_mode, Opt_ptmxmode, Opt_newinstance, Opt_err }; @@ -53,18 +60,50 @@ static const match_table_t tokens = { {Opt_uid, "uid=%u"}, {Opt_gid, "gid=%u"}, {Opt_mode, "mode=%o"}, +#ifdef CONFIG_DEVPTS_MULTIPLE_INSTANCES + {Opt_ptmxmode, "ptmxmode=%o"}, + {Opt_newinstance, "newinstance"}, +#endif {Opt_err, NULL} }; -static int devpts_remount(struct super_block *sb, int *flags, char *data) +struct pts_fs_info { + struct ida allocated_ptys; + struct pts_mount_opts mount_opts; + struct dentry *ptmx_dentry; +}; + +static inline struct pts_fs_info *DEVPTS_SB(struct super_block *sb) +{ + return sb->s_fs_info; +} + +static inline struct super_block *pts_sb_from_inode(struct inode *inode) +{ +#ifdef CONFIG_DEVPTS_MULTIPLE_INSTANCES + if (inode->i_sb->s_magic == DEVPTS_SUPER_MAGIC) + return inode->i_sb; +#endif + return devpts_mnt->mnt_sb; +} + +#define PARSE_MOUNT 0 +#define PARSE_REMOUNT 1 + +static int parse_mount_options(char *data, int op, struct pts_mount_opts *opts) { char *p; - config.setuid = 0; - config.setgid = 0; - config.uid = 0; - config.gid = 0; - config.mode = DEVPTS_DEFAULT_MODE; + opts->setuid = 0; + opts->setgid = 0; + opts->uid = 0; + opts->gid = 0; + opts->mode = DEVPTS_DEFAULT_MODE; + opts->ptmxmode = DEVPTS_DEFAULT_PTMX_MODE; + + /* newinstance makes sense only on initial mount */ + if (op == PARSE_MOUNT) + opts->newinstance = 0; while ((p = strsep(&data, ",")) != NULL) { substring_t args[MAX_OPT_ARGS]; @@ -79,20 +118,32 @@ static int devpts_remount(struct super_block *sb, int *flags, char *data) case Opt_uid: if (match_int(&args[0], &option)) return -EINVAL; - config.uid = option; - config.setuid = 1; + opts->uid = option; + opts->setuid = 1; break; case Opt_gid: if (match_int(&args[0], &option)) return -EINVAL; - config.gid = option; - config.setgid = 1; + opts->gid = option; + opts->setgid = 1; break; case Opt_mode: if (match_octal(&args[0], &option)) return -EINVAL; - config.mode = option & S_IALLUGO; + opts->mode = option & S_IALLUGO; + break; +#ifdef CONFIG_DEVPTS_MULTIPLE_INSTANCES + case Opt_ptmxmode: + if (match_octal(&args[0], &option)) + return -EINVAL; + opts->ptmxmode = option & S_IALLUGO; + break; + case Opt_newinstance: + /* newinstance makes sense only on initial mount */ + if (op == PARSE_MOUNT) + opts->newinstance = 1; break; +#endif default: printk(KERN_ERR "devpts: called with bogus options\n"); return -EINVAL; @@ -102,13 +153,108 @@ static int devpts_remount(struct super_block *sb, int *flags, char *data) return 0; } +#ifdef CONFIG_DEVPTS_MULTIPLE_INSTANCES +static int mknod_ptmx(struct super_block *sb) +{ + int mode; + int rc = -ENOMEM; + struct dentry *dentry; + struct inode *inode; + struct dentry *root = sb->s_root; + struct pts_fs_info *fsi = DEVPTS_SB(sb); + struct pts_mount_opts *opts = &fsi->mount_opts; + + mutex_lock(&root->d_inode->i_mutex); + + /* If we have already created ptmx node, return */ + if (fsi->ptmx_dentry) { + rc = 0; + goto out; + } + + dentry = d_alloc_name(root, "ptmx"); + if (!dentry) { + printk(KERN_NOTICE "Unable to alloc dentry for ptmx node\n"); + goto out; + } + + /* + * Create a new 'ptmx' node in this mount of devpts. + */ + inode = new_inode(sb); + if (!inode) { + printk(KERN_ERR "Unable to alloc inode for ptmx node\n"); + dput(dentry); + goto out; + } + + inode->i_ino = 2; + inode->i_uid = inode->i_gid = 0; + inode->i_blocks = 0; + inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME; + + mode = S_IFCHR|opts->ptmxmode; + init_special_inode(inode, mode, MKDEV(TTYAUX_MAJOR, 2)); + + d_add(dentry, inode); + + fsi->ptmx_dentry = dentry; + rc = 0; + + printk(KERN_DEBUG "Created ptmx node in devpts ino %lu\n", + inode->i_ino); +out: + mutex_unlock(&root->d_inode->i_mutex); + return rc; +} + +static void update_ptmx_mode(struct pts_fs_info *fsi) +{ + struct inode *inode; + if (fsi->ptmx_dentry) { + inode = fsi->ptmx_dentry->d_inode; + inode->i_mode = S_IFCHR|fsi->mount_opts.ptmxmode; + } +} +#else +static inline void update_ptmx_mode(struct pts_fs_info *fsi) +{ + return; +} +#endif + +static int devpts_remount(struct super_block *sb, int *flags, char *data) +{ + int err; + struct pts_fs_info *fsi = DEVPTS_SB(sb); + struct pts_mount_opts *opts = &fsi->mount_opts; + + err = parse_mount_options(data, PARSE_REMOUNT, opts); + + /* + * parse_mount_options() restores options to default values + * before parsing and may have changed ptmxmode. So, update the + * mode in the inode too. Bogus options don't fail the remount, + * so do this even on error return. + */ + update_ptmx_mode(fsi); + + return err; +} + static int devpts_show_options(struct seq_file *seq, struct vfsmount *vfs) { - if (config.setuid) - seq_printf(seq, ",uid=%u", config.uid); - if (config.setgid) - seq_printf(seq, ",gid=%u", config.gid); - seq_printf(seq, ",mode=%03o", config.mode); + struct pts_fs_info *fsi = DEVPTS_SB(vfs->mnt_sb); + struct pts_mount_opts *opts = &fsi->mount_opts; + + if (opts->setuid) + seq_printf(seq, ",uid=%u", opts->uid); + if (opts->setgid) + seq_printf(seq, ",gid=%u", opts->gid); + seq_printf(seq, ",mode=%03o", opts->mode); +#ifdef CONFIG_DEVPTS_MULTIPLE_INSTANCES + seq_printf(seq, ",ptmxmode=%03o", opts->ptmxmode); +#endif return 0; } @@ -119,10 +265,25 @@ static const struct super_operations devpts_sops = { .show_options = devpts_show_options, }; +static void *new_pts_fs_info(void) +{ + struct pts_fs_info *fsi; + + fsi = kzalloc(sizeof(struct pts_fs_info), GFP_KERNEL); + if (!fsi) + return NULL; + + ida_init(&fsi->allocated_ptys); + fsi->mount_opts.mode = DEVPTS_DEFAULT_MODE; + fsi->mount_opts.ptmxmode = DEVPTS_DEFAULT_PTMX_MODE; + + return fsi; +} + static int devpts_fill_super(struct super_block *s, void *data, int silent) { - struct inode * inode; + struct inode *inode; s->s_blocksize = 1024; s->s_blocksize_bits = 10; @@ -130,9 +291,13 @@ devpts_fill_super(struct super_block *s, void *data, int silent) s->s_op = &devpts_sops; s->s_time_gran = 1; + s->s_fs_info = new_pts_fs_info(); + if (!s->s_fs_info) + goto fail; + inode = new_inode(s); if (!inode) - goto fail; + goto free_fsi; inode->i_ino = 1; inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME; inode->i_blocks = 0; @@ -142,27 +307,226 @@ devpts_fill_super(struct super_block *s, void *data, int silent) inode->i_fop = &simple_dir_operations; inode->i_nlink = 2; - devpts_root = s->s_root = d_alloc_root(inode); + s->s_root = d_alloc_root(inode); if (s->s_root) return 0; - - printk("devpts: get root dentry failed\n"); + + printk(KERN_ERR "devpts: get root dentry failed\n"); iput(inode); + +free_fsi: + kfree(s->s_fs_info); fail: return -ENOMEM; } +#ifdef CONFIG_DEVPTS_MULTIPLE_INSTANCES +static int compare_init_pts_sb(struct super_block *s, void *p) +{ + if (devpts_mnt) + return devpts_mnt->mnt_sb == s; + return 0; +} + +/* + * Safely parse the mount options in @data and update @opts. + * + * devpts ends up parsing options two times during mount, due to the + * two modes of operation it supports. The first parse occurs in + * devpts_get_sb() when determining the mode (single-instance or + * multi-instance mode). The second parse happens in devpts_remount() + * or new_pts_mount() depending on the mode. + * + * Parsing of options modifies the @data making subsequent parsing + * incorrect. So make a local copy of @data and parse it. + * + * Return: 0 On success, -errno on error + */ +static int safe_parse_mount_options(void *data, struct pts_mount_opts *opts) +{ + int rc; + void *datacp; + + if (!data) + return 0; + + /* Use kstrdup() ? */ + datacp = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!datacp) + return -ENOMEM; + + memcpy(datacp, data, PAGE_SIZE); + rc = parse_mount_options((char *)datacp, PARSE_MOUNT, opts); + kfree(datacp); + + return rc; +} + +/* + * Mount a new (private) instance of devpts. PTYs created in this + * instance are independent of the PTYs in other devpts instances. + */ +static int new_pts_mount(struct file_system_type *fs_type, int flags, + void *data, struct vfsmount *mnt) +{ + int err; + struct pts_fs_info *fsi; + struct pts_mount_opts *opts; + + printk(KERN_NOTICE "devpts: newinstance mount\n"); + + err = get_sb_nodev(fs_type, flags, data, devpts_fill_super, mnt); + if (err) + return err; + + fsi = DEVPTS_SB(mnt->mnt_sb); + opts = &fsi->mount_opts; + + err = parse_mount_options(data, PARSE_MOUNT, opts); + if (err) + goto fail; + + err = mknod_ptmx(mnt->mnt_sb); + if (err) + goto fail; + + return 0; + +fail: + dput(mnt->mnt_sb->s_root); + deactivate_super(mnt->mnt_sb); + return err; +} + +/* + * Check if 'newinstance' mount option was specified in @data. + * + * Return: -errno on error (eg: invalid mount options specified) + * : 1 if 'newinstance' mount option was specified + * : 0 if 'newinstance' mount option was NOT specified + */ +static int is_new_instance_mount(void *data) +{ + int rc; + struct pts_mount_opts opts; + + if (!data) + return 0; + + rc = safe_parse_mount_options(data, &opts); + if (!rc) + rc = opts.newinstance; + + return rc; +} + +/* + * get_init_pts_sb() + * + * This interface is needed to support multiple namespace semantics in + * devpts while preserving backward compatibility of the current 'single- + * namespace' semantics. i.e all mounts of devpts without the 'newinstance' + * mount option should bind to the initial kernel mount, like + * get_sb_single(). + * + * Mounts with 'newinstance' option create a new private namespace. + * + * But for single-mount semantics, devpts cannot use get_sb_single(), + * because get_sb_single()/sget() find and use the super-block from + * the most recent mount of devpts. But that recent mount may be a + * 'newinstance' mount and get_sb_single() would pick the newinstance + * super-block instead of the initial super-block. + * + * This interface is identical to get_sb_single() except that it + * consistently selects the 'single-namespace' superblock even in the + * presence of the private namespace (i.e 'newinstance') super-blocks. + */ +static int get_init_pts_sb(struct file_system_type *fs_type, int flags, + void *data, struct vfsmount *mnt) +{ + struct super_block *s; + int error; + + s = sget(fs_type, compare_init_pts_sb, set_anon_super, NULL); + if (IS_ERR(s)) + return PTR_ERR(s); + + if (!s->s_root) { + s->s_flags = flags; + error = devpts_fill_super(s, data, flags & MS_SILENT ? 1 : 0); + if (error) { + up_write(&s->s_umount); + deactivate_super(s); + return error; + } + s->s_flags |= MS_ACTIVE; + } + do_remount_sb(s, flags, data, 0); + return simple_set_mnt(mnt, s); +} + +/* + * Mount or remount the initial kernel mount of devpts. This type of + * mount maintains the legacy, single-instance semantics, while the + * kernel still allows multiple-instances. + */ +static int init_pts_mount(struct file_system_type *fs_type, int flags, + void *data, struct vfsmount *mnt) +{ + int err; + + err = get_init_pts_sb(fs_type, flags, data, mnt); + if (err) + return err; + + err = mknod_ptmx(mnt->mnt_sb); + if (err) { + dput(mnt->mnt_sb->s_root); + deactivate_super(mnt->mnt_sb); + } + + return err; +} + static int devpts_get_sb(struct file_system_type *fs_type, int flags, const char *dev_name, void *data, struct vfsmount *mnt) { + int new; + + new = is_new_instance_mount(data); + if (new < 0) + return new; + + if (new) + return new_pts_mount(fs_type, flags, data, mnt); + + return init_pts_mount(fs_type, flags, data, mnt); +} +#else +/* + * This supports only the legacy single-instance semantics (no + * multiple-instance semantics) + */ +static int devpts_get_sb(struct file_system_type *fs_type, int flags, + const char *dev_name, void *data, struct vfsmount *mnt) +{ return get_sb_single(fs_type, flags, data, devpts_fill_super, mnt); } +#endif + +static void devpts_kill_sb(struct super_block *sb) +{ + struct pts_fs_info *fsi = DEVPTS_SB(sb); + + kfree(fsi); + kill_litter_super(sb); +} static struct file_system_type devpts_fs_type = { .owner = THIS_MODULE, .name = "devpts", .get_sb = devpts_get_sb, - .kill_sb = kill_anon_super, + .kill_sb = devpts_kill_sb, }; /* @@ -172,16 +536,17 @@ static struct file_system_type devpts_fs_type = { int devpts_new_index(struct inode *ptmx_inode) { + struct super_block *sb = pts_sb_from_inode(ptmx_inode); + struct pts_fs_info *fsi = DEVPTS_SB(sb); int index; int ida_ret; retry: - if (!ida_pre_get(&allocated_ptys, GFP_KERNEL)) { + if (!ida_pre_get(&fsi->allocated_ptys, GFP_KERNEL)) return -ENOMEM; - } mutex_lock(&allocated_ptys_lock); - ida_ret = ida_get_new(&allocated_ptys, &index); + ida_ret = ida_get_new(&fsi->allocated_ptys, &index); if (ida_ret < 0) { mutex_unlock(&allocated_ptys_lock); if (ida_ret == -EAGAIN) @@ -190,7 +555,7 @@ retry: } if (index >= pty_limit) { - ida_remove(&allocated_ptys, index); + ida_remove(&fsi->allocated_ptys, index); mutex_unlock(&allocated_ptys_lock); return -EIO; } @@ -200,18 +565,26 @@ retry: void devpts_kill_index(struct inode *ptmx_inode, int idx) { + struct super_block *sb = pts_sb_from_inode(ptmx_inode); + struct pts_fs_info *fsi = DEVPTS_SB(sb); + mutex_lock(&allocated_ptys_lock); - ida_remove(&allocated_ptys, idx); + ida_remove(&fsi->allocated_ptys, idx); mutex_unlock(&allocated_ptys_lock); } int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty) { - int number = tty->index; /* tty layer puts index from devpts_new_index() in here */ + /* tty layer puts index from devpts_new_index() in here */ + int number = tty->index; struct tty_driver *driver = tty->driver; dev_t device = MKDEV(driver->major, driver->minor_start+number); struct dentry *dentry; - struct inode *inode = new_inode(devpts_mnt->mnt_sb); + struct super_block *sb = pts_sb_from_inode(ptmx_inode); + struct inode *inode = new_inode(sb); + struct dentry *root = sb->s_root; + struct pts_fs_info *fsi = DEVPTS_SB(sb); + struct pts_mount_opts *opts = &fsi->mount_opts; char s[12]; /* We're supposed to be given the slave end of a pty */ @@ -221,25 +594,25 @@ int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty) if (!inode) return -ENOMEM; - inode->i_ino = number+2; - inode->i_uid = config.setuid ? config.uid : current_fsuid(); - inode->i_gid = config.setgid ? config.gid : current_fsgid(); + inode->i_ino = number + 3; + inode->i_uid = opts->setuid ? opts->uid : current_fsuid(); + inode->i_gid = opts->setgid ? opts->gid : current_fsgid(); inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME; - init_special_inode(inode, S_IFCHR|config.mode, device); + init_special_inode(inode, S_IFCHR|opts->mode, device); inode->i_private = tty; tty->driver_data = inode; sprintf(s, "%d", number); - mutex_lock(&devpts_root->d_inode->i_mutex); + mutex_lock(&root->d_inode->i_mutex); - dentry = d_alloc_name(devpts_root, s); + dentry = d_alloc_name(root, s); if (!IS_ERR(dentry)) { d_add(dentry, inode); - fsnotify_create(devpts_root->d_inode, dentry); + fsnotify_create(root->d_inode, dentry); } - mutex_unlock(&devpts_root->d_inode->i_mutex); + mutex_unlock(&root->d_inode->i_mutex); return 0; } @@ -256,20 +629,27 @@ struct tty_struct *devpts_get_tty(struct inode *pts_inode, int number) void devpts_pty_kill(struct tty_struct *tty) { struct inode *inode = tty->driver_data; + struct super_block *sb = pts_sb_from_inode(inode); + struct dentry *root = sb->s_root; struct dentry *dentry; BUG_ON(inode->i_rdev == MKDEV(TTYAUX_MAJOR, PTMX_MINOR)); - mutex_lock(&devpts_root->d_inode->i_mutex); + mutex_lock(&root->d_inode->i_mutex); dentry = d_find_alias(inode); - if (dentry && !IS_ERR(dentry)) { + if (IS_ERR(dentry)) + goto out; + + if (dentry) { inode->i_nlink--; d_delete(dentry); - dput(dentry); + dput(dentry); /* d_alloc_name() in devpts_pty_new() */ } - mutex_unlock(&devpts_root->d_inode->i_mutex); + dput(dentry); /* d_find_alias above */ +out: + mutex_unlock(&root->d_inode->i_mutex); } static int __init init_devpts_fs(void) diff --git a/include/linux/8250_pci.h b/include/linux/8250_pci.h index 3209dd46ea7d..b24ff086a662 100644 --- a/include/linux/8250_pci.h +++ b/include/linux/8250_pci.h @@ -31,7 +31,7 @@ struct pciserial_board { struct serial_private; struct serial_private * -pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board); +pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board); void pciserial_remove_ports(struct serial_private *priv); void pciserial_suspend_ports(struct serial_private *priv); void pciserial_resume_ports(struct serial_private *priv); diff --git a/include/linux/generic_serial.h b/include/linux/generic_serial.h index 4cc913939817..fadff28505bb 100644 --- a/include/linux/generic_serial.h +++ b/include/linux/generic_serial.h @@ -21,7 +21,6 @@ struct real_driver { void (*enable_tx_interrupts) (void *); void (*disable_rx_interrupts) (void *); void (*enable_rx_interrupts) (void *); - int (*get_CD) (void *); void (*shutdown_port) (void*); int (*set_real_termios) (void*); int (*chars_in_buffer) (void*); diff --git a/include/linux/istallion.h b/include/linux/istallion.h index 0d1840723249..7faca98c7d14 100644 --- a/include/linux/istallion.h +++ b/include/linux/istallion.h @@ -59,9 +59,7 @@ struct stliport { unsigned int devnr; int baud_base; int custom_divisor; - int close_delay; int closing_wait; - int openwaitcnt; int rc; int argsize; void *argp; diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index b6e694454280..218c73b1e6d4 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1766,6 +1766,7 @@ #define PCI_DEVICE_ID_SIIG_8S_20x_650 0x2081 #define PCI_DEVICE_ID_SIIG_8S_20x_850 0x2082 #define PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL 0x2050 +#define PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL 0x2530 #define PCI_VENDOR_ID_RADISYS 0x1331 @@ -1795,6 +1796,7 @@ #define PCI_DEVICE_ID_SEALEVEL_UCOMM232 0x7202 #define PCI_DEVICE_ID_SEALEVEL_COMM4 0x7401 #define PCI_DEVICE_ID_SEALEVEL_COMM8 0x7801 +#define PCI_DEVICE_ID_SEALEVEL_7803 0x7803 #define PCI_DEVICE_ID_SEALEVEL_UCOMM8 0x7804 #define PCI_VENDOR_ID_HYPERCOPE 0x1365 diff --git a/include/linux/serial.h b/include/linux/serial.h index 1ea8d9265bf6..9136cc5608c3 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -10,8 +10,9 @@ #ifndef _LINUX_SERIAL_H #define _LINUX_SERIAL_H -#ifdef __KERNEL__ #include <linux/types.h> + +#ifdef __KERNEL__ #include <asm/page.h> /* diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index 3d37c94abbc8..d4d2a78ad43e 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -28,6 +28,9 @@ struct plat_serial8250_port { unsigned char iotype; /* UPIO_* */ unsigned char hub6; upf_t flags; /* UPF_* flags */ + unsigned int type; /* If UPF_FIXED_TYPE */ + unsigned int (*serial_in)(struct uart_port *, int); + void (*serial_out)(struct uart_port *, int, int); }; /* diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index feb3b939ec4b..b4199841f1fc 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -40,7 +40,8 @@ #define PORT_NS16550A 14 #define PORT_XSCALE 15 #define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */ -#define PORT_MAX_8250 16 /* max port ID */ +#define PORT_OCTEON 17 /* Cavium OCTEON internal UART */ +#define PORT_MAX_8250 17 /* max port ID */ /* * ARM specific type numbers. These are not currently guaranteed @@ -248,6 +249,8 @@ struct uart_port { spinlock_t lock; /* port lock */ unsigned long iobase; /* in/out[bwl] */ unsigned char __iomem *membase; /* read/write[bwl] */ + unsigned int (*serial_in)(struct uart_port *, int); + void (*serial_out)(struct uart_port *, int, int); unsigned int irq; /* irq number */ unsigned int uartclk; /* base uart clock */ unsigned int fifosize; /* tx fifo size */ @@ -293,6 +296,8 @@ struct uart_port { #define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16)) #define UPF_CONS_FLOW ((__force upf_t) (1 << 23)) #define UPF_SHARE_IRQ ((__force upf_t) (1 << 24)) +/* The exact UART type is known and should not be probed. */ +#define UPF_FIXED_TYPE ((__force upf_t) (1 << 27)) #define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28)) #define UPF_FIXED_PORT ((__force upf_t) (1 << 29)) #define UPF_DEAD ((__force upf_t) (1 << 30)) @@ -316,35 +321,13 @@ struct uart_port { }; /* - * This is the state information which is persistent across opens. - * The low level driver must not to touch any elements contained - * within. - */ -struct uart_state { - unsigned int close_delay; /* msec */ - unsigned int closing_wait; /* msec */ - -#define USF_CLOSING_WAIT_INF (0) -#define USF_CLOSING_WAIT_NONE (~0U) - - int count; - int pm_state; - struct uart_info *info; - struct uart_port *port; - - struct mutex mutex; -}; - -#define UART_XMIT_SIZE PAGE_SIZE - -typedef unsigned int __bitwise__ uif_t; - -/* * This is the state information which is only valid when the port - * is open; it may be freed by the core driver once the device has + * is open; it may be cleared the core driver once the device has * been closed. Either the low level driver or the core can modify * stuff here. */ +typedef unsigned int __bitwise__ uif_t; + struct uart_info { struct tty_port port; struct circ_buf xmit; @@ -366,6 +349,29 @@ struct uart_info { wait_queue_head_t delta_msr_wait; }; +/* + * This is the state information which is persistent across opens. + * The low level driver must not to touch any elements contained + * within. + */ +struct uart_state { + unsigned int close_delay; /* msec */ + unsigned int closing_wait; /* msec */ + +#define USF_CLOSING_WAIT_INF (0) +#define USF_CLOSING_WAIT_NONE (~0U) + + int count; + int pm_state; + struct uart_info info; + struct uart_port *port; + + struct mutex mutex; +}; + +#define UART_XMIT_SIZE PAGE_SIZE + + /* number of characters left in xmit buffer before we ask for more */ #define WAKEUP_CHARS 256 @@ -439,8 +445,13 @@ int uart_resume_port(struct uart_driver *reg, struct uart_port *port); #define uart_circ_chars_free(circ) \ (CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE)) -#define uart_tx_stopped(portp) \ - ((portp)->info->port.tty->stopped || (portp)->info->port.tty->hw_stopped) +static inline int uart_tx_stopped(struct uart_port *port) +{ + struct tty_struct *tty = port->info->port.tty; + if(tty->stopped || tty->hw_stopped) + return 1; + return 0; +} /* * The following are helper functions for the low level drivers. @@ -451,7 +462,7 @@ uart_handle_sysrq_char(struct uart_port *port, unsigned int ch) #ifdef SUPPORT_SYSRQ if (port->sysrq) { if (ch && time_before(jiffies, port->sysrq)) { - handle_sysrq(ch, port->info ? port->info->port.tty : NULL); + handle_sysrq(ch, port->info->port.tty); port->sysrq = 0; return 1; } diff --git a/include/linux/tty.h b/include/linux/tty.h index 3f4954c55e53..fc39db95499f 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -180,8 +180,17 @@ struct signal_struct; * until a hangup so don't use the wrong path. */ +struct tty_port; + +struct tty_port_operations { + /* Return 1 if the carrier is raised */ + int (*carrier_raised)(struct tty_port *port); + void (*raise_dtr_rts)(struct tty_port *port); +}; + struct tty_port { struct tty_struct *tty; /* Back pointer */ + const struct tty_port_operations *ops; /* Port operations */ spinlock_t lock; /* Lock protecting tty field */ int blocked_open; /* Waiting to open */ int count; /* Usage count */ @@ -253,6 +262,7 @@ struct tty_struct { unsigned int column; unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1; unsigned char closing:1; + unsigned char echo_overrun:1; unsigned short minimum_to_wake; unsigned long overrun_time; int num_overrun; @@ -262,11 +272,16 @@ struct tty_struct { int read_tail; int read_cnt; unsigned long read_flags[N_TTY_BUF_SIZE/(8*sizeof(unsigned long))]; + unsigned char *echo_buf; + unsigned int echo_pos; + unsigned int echo_cnt; int canon_data; unsigned long canon_head; unsigned int canon_column; struct mutex atomic_read_lock; struct mutex atomic_write_lock; + struct mutex output_lock; + struct mutex echo_lock; unsigned char *write_buf; int write_cnt; spinlock_t read_lock; @@ -295,6 +310,7 @@ struct tty_struct { #define TTY_PUSH 6 /* n_tty private */ #define TTY_CLOSING 7 /* ->close() in progress */ #define TTY_LDISC 9 /* Line discipline attached */ +#define TTY_LDISC_CHANGING 10 /* Line discipline changing */ #define TTY_HW_COOK_OUT 14 /* Hardware can do output cooking */ #define TTY_HW_COOK_IN 15 /* Hardware can do input cooking */ #define TTY_PTY_LOCK 16 /* pty private */ @@ -354,8 +370,7 @@ extern int tty_write_room(struct tty_struct *tty); extern void tty_driver_flush_buffer(struct tty_struct *tty); extern void tty_throttle(struct tty_struct *tty); extern void tty_unthrottle(struct tty_struct *tty); -extern int tty_do_resize(struct tty_struct *tty, struct tty_struct *real_tty, - struct winsize *ws); +extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws); extern void tty_shutdown(struct tty_struct *tty); extern void tty_free_termios(struct tty_struct *tty); extern int is_current_pgrp_orphaned(void); @@ -421,6 +436,14 @@ extern int tty_port_alloc_xmit_buf(struct tty_port *port); extern void tty_port_free_xmit_buf(struct tty_port *port); extern struct tty_struct *tty_port_tty_get(struct tty_port *port); extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty); +extern int tty_port_carrier_raised(struct tty_port *port); +extern void tty_port_raise_dtr_rts(struct tty_port *port); +extern void tty_port_hangup(struct tty_port *port); +extern int tty_port_block_til_ready(struct tty_port *port, + struct tty_struct *tty, struct file *filp); +extern int tty_port_close_start(struct tty_port *port, + struct tty_struct *tty, struct file *filp); +extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty); extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc); extern int tty_unregister_ldisc(int disc); diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index 78416b901589..08e088334dba 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -196,8 +196,7 @@ * Optional: If not provided then the write method is called under * the atomic write lock to keep it serialized with the ldisc. * - * int (*resize)(struct tty_struct *tty, struct tty_struct *real_tty, - * unsigned int rows, unsigned int cols); + * int (*resize)(struct tty_struct *tty, struct winsize *ws) * * Called when a termios request is issued which changes the * requested terminal geometry. @@ -258,8 +257,7 @@ struct tty_operations { int (*tiocmget)(struct tty_struct *tty, struct file *file); int (*tiocmset)(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); - int (*resize)(struct tty_struct *tty, struct tty_struct *real_tty, - struct winsize *ws); + int (*resize)(struct tty_struct *tty, struct winsize *ws); int (*set_termiox)(struct tty_struct *tty, struct termiox *tnew); #ifdef CONFIG_CONSOLE_POLL int (*poll_init)(struct tty_driver *driver, int line, char *options); diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c index e4e2caeb9d82..086d5ef098fd 100644 --- a/net/irda/ircomm/ircomm_tty.c +++ b/net/irda/ircomm/ircomm_tty.c @@ -371,9 +371,8 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp) IRDA_DEBUG(2, "%s()\n", __func__ ); line = tty->index; - if ((line < 0) || (line >= IRCOMM_TTY_PORTS)) { + if (line >= IRCOMM_TTY_PORTS) return -ENODEV; - } /* Check if instance already exists */ self = hashbin_lock_find(ircomm_tty, line, NULL); @@ -405,6 +404,8 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp) * Force TTY into raw mode by default which is usually what * we want for IrCOMM and IrLPT. This way applications will * not have to twiddle with printcap etc. + * + * Note this is completely usafe and doesn't work properly */ tty->termios->c_iflag = 0; tty->termios->c_oflag = 0; |