diff options
| -rw-r--r-- | Documentation/networking/s2io.txt | 199 | ||||
| -rw-r--r-- | MAINTAINERS | 9 | ||||
| -rw-r--r-- | drivers/net/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/net/fec_8xx/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/net/fec_8xx/fec_mii.c | 42 | ||||
| -rw-r--r-- | drivers/net/fs_enet/fs_enet-main.c | 21 | ||||
| -rw-r--r-- | drivers/net/ibm_emac/ibm_emac.h | 22 | ||||
| -rw-r--r-- | drivers/net/ibm_emac/ibm_emac_core.c | 20 | ||||
| -rw-r--r-- | drivers/net/ibm_emac/ibm_emac_mal.h | 5 | ||||
| -rw-r--r-- | drivers/net/ibm_emac/ibm_emac_phy.c | 12 | ||||
| -rw-r--r-- | drivers/net/pcnet32.c | 87 | ||||
| -rw-r--r-- | drivers/net/phy/mdio_bus.c | 3 | ||||
| -rw-r--r-- | drivers/net/s2io.c | 762 | ||||
| -rw-r--r-- | drivers/net/s2io.h | 91 | ||||
| -rw-r--r-- | drivers/net/wireless/airo.c | 2 | ||||
| -rw-r--r-- | include/linux/phy.h | 3 |
16 files changed, 792 insertions, 507 deletions
diff --git a/Documentation/networking/s2io.txt b/Documentation/networking/s2io.txt index 6726b524ec45..bd528ffbeb4b 100644 --- a/Documentation/networking/s2io.txt +++ b/Documentation/networking/s2io.txt @@ -1,48 +1,153 @@ -S2IO Technologies XFrame 10 Gig adapter. -------------------------------------------- - -I. Module loadable parameters. -When loaded as a module, the driver provides a host of Module loadable -parameters, so the device can be tuned as per the users needs. -A list of the Module params is given below. -(i) ring_num: This can be used to program the number of - receive rings used in the driver. -(ii) ring_len: This defines the number of descriptors each ring - can have. There can be a maximum of 8 rings. -(iii) frame_len: This is an array of size 8. Using this we can - set the maximum size of the received frame that can - be steered into the corrsponding receive ring. -(iv) fifo_num: This defines the number of Tx FIFOs thats used in - the driver. -(v) fifo_len: Each element defines the number of - Tx descriptors that can be associated with each - corresponding FIFO. There are a maximum of 8 FIFOs. -(vi) tx_prio: This is a bool, if module is loaded with a non-zero - value for tx_prio multi FIFO scheme is activated. -(vii) rx_prio: This is a bool, if module is loaded with a non-zero - value for tx_prio multi RING scheme is activated. -(viii) latency_timer: The value given against this param will be - loaded into the latency timer register in PCI Config - space, else the register is left with its reset value. - -II. Performance tuning. - By changing a few sysctl parameters. - Copy the following lines into a file and run the following command, - "sysctl -p <file_name>" -### IPV4 specific settings -net.ipv4.tcp_timestamps = 0 # turns TCP timestamp support off, default 1, reduces CPU use -net.ipv4.tcp_sack = 0 # turn SACK support off, default on -# on systems with a VERY fast bus -> memory interface this is the big gainer -net.ipv4.tcp_rmem = 10000000 10000000 10000000 # sets min/default/max TCP read buffer, default 4096 87380 174760 -net.ipv4.tcp_wmem = 10000000 10000000 10000000 # sets min/pressure/max TCP write buffer, default 4096 16384 131072 -net.ipv4.tcp_mem = 10000000 10000000 10000000 # sets min/pressure/max TCP buffer space, default 31744 32256 32768 - -### CORE settings (mostly for socket and UDP effect) -net.core.rmem_max = 524287 # maximum receive socket buffer size, default 131071 -net.core.wmem_max = 524287 # maximum send socket buffer size, default 131071 -net.core.rmem_default = 524287 # default receive socket buffer size, default 65535 -net.core.wmem_default = 524287 # default send socket buffer size, default 65535 -net.core.optmem_max = 524287 # maximum amount of option memory buffers, default 10240 -net.core.netdev_max_backlog = 300000 # number of unprocessed input packets before kernel starts dropping them, default 300 ----End of performance tuning file--- +Release notes for Neterion's (Formerly S2io) Xframe I/II PCI-X 10GbE driver. + +Contents +======= +- 1. Introduction +- 2. Identifying the adapter/interface +- 3. Features supported +- 4. Command line parameters +- 5. Performance suggestions +- 6. Available Downloads + + +1. Introduction: +This Linux driver supports Neterion's Xframe I PCI-X 1.0 and +Xframe II PCI-X 2.0 adapters. It supports several features +such as jumbo frames, MSI/MSI-X, checksum offloads, TSO, UFO and so on. +See below for complete list of features. +All features are supported for both IPv4 and IPv6. + +2. Identifying the adapter/interface: +a. Insert the adapter(s) in your system. +b. Build and load driver +# insmod s2io.ko +c. View log messages +# dmesg | tail -40 +You will see messages similar to: +eth3: Neterion Xframe I 10GbE adapter (rev 3), Version 2.0.9.1, Intr type INTA +eth4: Neterion Xframe II 10GbE adapter (rev 2), Version 2.0.9.1, Intr type INTA +eth4: Device is on 64 bit 133MHz PCIX(M1) bus + +The above messages identify the adapter type(Xframe I/II), adapter revision, +driver version, interface name(eth3, eth4), Interrupt type(INTA, MSI, MSI-X). +In case of Xframe II, the PCI/PCI-X bus width and frequency are displayed +as well. + +To associate an interface with a physical adapter use "ethtool -p <ethX>". +The corresponding adapter's LED will blink multiple times. + +3. Features supported: +a. Jumbo frames. Xframe I/II supports MTU upto 9600 bytes, +modifiable using ifconfig command. + +b. Offloads. Supports checksum offload(TCP/UDP/IP) on transmit +and receive, TSO. + +c. Multi-buffer receive mode. Scattering of packet across multiple +buffers. Currently driver supports 2-buffer mode which yields +significant performance improvement on certain platforms(SGI Altix, +IBM xSeries). + +d. MSI/MSI-X. Can be enabled on platforms which support this feature +(IA64, Xeon) resulting in noticeable performance improvement(upto 7% +on certain platforms). + +e. NAPI. Compile-time option(CONFIG_S2IO_NAPI) for better Rx interrupt +moderation. + +f. Statistics. Comprehensive MAC-level and software statistics displayed +using "ethtool -S" option. + +g. Multi-FIFO/Ring. Supports up to 8 transmit queues and receive rings, +with multiple steering options. + +4. Command line parameters +a. tx_fifo_num +Number of transmit queues +Valid range: 1-8 +Default: 1 + +b. rx_ring_num +Number of receive rings +Valid range: 1-8 +Default: 1 + +c. tx_fifo_len +Size of each transmit queue +Valid range: Total length of all queues should not exceed 8192 +Default: 4096 + +d. rx_ring_sz +Size of each receive ring(in 4K blocks) +Valid range: Limited by memory on system +Default: 30 + +e. intr_type +Specifies interrupt type. Possible values 1(INTA), 2(MSI), 3(MSI-X) +Valid range: 1-3 +Default: 1 + +5. Performance suggestions +General: +a. Set MTU to maximum(9000 for switch setup, 9600 in back-to-back configuration) +b. Set TCP windows size to optimal value. +For instance, for MTU=1500 a value of 210K has been observed to result in +good performance. +# sysctl -w net.ipv4.tcp_rmem="210000 210000 210000" +# sysctl -w net.ipv4.tcp_wmem="210000 210000 210000" +For MTU=9000, TCP window size of 10 MB is recommended. +# sysctl -w net.ipv4.tcp_rmem="10000000 10000000 10000000" +# sysctl -w net.ipv4.tcp_wmem="10000000 10000000 10000000" + +Transmit performance: +a. By default, the driver respects BIOS settings for PCI bus parameters. +However, you may want to experiment with PCI bus parameters +max-split-transactions(MOST) and MMRBC (use setpci command). +A MOST value of 2 has been found optimal for Opterons and 3 for Itanium. +It could be different for your hardware. +Set MMRBC to 4K**. + +For example you can set +For opteron +#setpci -d 17d5:* 62=1d +For Itanium +#setpci -d 17d5:* 62=3d + +For detailed description of the PCI registers, please see Xframe User Guide. + +b. Ensure Transmit Checksum offload is enabled. Use ethtool to set/verify this +parameter. +c. Turn on TSO(using "ethtool -K") +# ethtool -K <ethX> tso on + +Receive performance: +a. By default, the driver respects BIOS settings for PCI bus parameters. +However, you may want to set PCI latency timer to 248. +#setpci -d 17d5:* LATENCY_TIMER=f8 +For detailed description of the PCI registers, please see Xframe User Guide. +b. Use 2-buffer mode. This results in large performance boost on +on certain platforms(eg. SGI Altix, IBM xSeries). +c. Ensure Receive Checksum offload is enabled. Use "ethtool -K ethX" command to +set/verify this option. +d. Enable NAPI feature(in kernel configuration Device Drivers ---> Network +device support ---> Ethernet (10000 Mbit) ---> S2IO 10Gbe Xframe NIC) to +bring down CPU utilization. + +** For AMD opteron platforms with 8131 chipset, MMRBC=1 and MOST=1 are +recommended as safe parameters. +For more information, please review the AMD8131 errata at +http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26310.pdf + +6. Available Downloads +Neterion "s2io" driver in Red Hat and Suse 2.6-based distributions is kept up +to date, also the latest "s2io" code (including support for 2.4 kernels) is +available via "Support" link on the Neterion site: http://www.neterion.com. + +For Xframe User Guide (Programming manual), visit ftp site ns1.s2io.com, +user: linuxdocs password: HALdocs + +7. Support +For further support please contact either your 10GbE Xframe NIC vendor (IBM, +HP, SGI etc.) or click on the "Support" link on the Neterion site: +http://www.neterion.com. diff --git a/MAINTAINERS b/MAINTAINERS index 983f9e9aed61..f08a1434b217 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -910,6 +910,15 @@ L: linux-fbdev-devel@lists.sourceforge.net W: http://linux-fbdev.sourceforge.net/ S: Maintained +FREESCALE SOC FS_ENET DRIVER +P: Pantelis Antoniou +M: pantelis.antoniou@gmail.com +P: Vitaly Bordug +M: vbordug@ru.mvista.com +L: linuxppc-embedded@ozlabs.org +L: netdev@vger.kernel.org +S: Maintained + FILE LOCKING (flock() and fcntl()/lockf()) P: Matthew Wilcox M: matthew@wil.cx diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 57edae4790e8..1958d9e16a3a 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1203,7 +1203,7 @@ config IBM_EMAC_RX_SKB_HEADROOM config IBM_EMAC_PHY_RX_CLK_FIX bool "PHY Rx clock workaround" - depends on IBM_EMAC && (405EP || 440GX || 440EP) + depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR) help Enable this if EMAC attached to a PHY which doesn't generate RX clock if there is no link, if this is the case, you will @@ -2258,17 +2258,6 @@ config S2IO_NAPI If in doubt, say N. -config 2BUFF_MODE - bool "Use 2 Buffer Mode on Rx side." - depends on S2IO - ---help--- - On enabling the 2 buffer mode, the received frame will be - split into 2 parts before being DMA'ed to the hosts memory. - The parts are the ethernet header and ethernet payload. - This is useful on systems where DMA'ing to to unaligned - physical memory loactions comes with a heavy price. - If not sure please say N. - endmenu if !UML diff --git a/drivers/net/fec_8xx/Kconfig b/drivers/net/fec_8xx/Kconfig index db36ac3ea453..4560026ed419 100644 --- a/drivers/net/fec_8xx/Kconfig +++ b/drivers/net/fec_8xx/Kconfig @@ -1,6 +1,6 @@ config FEC_8XX tristate "Motorola 8xx FEC driver" - depends on NET_ETHERNET && 8xx && (NETTA || NETPHONE) + depends on NET_ETHERNET select MII config FEC_8XX_GENERIC_PHY @@ -12,3 +12,9 @@ config FEC_8XX_DM9161_PHY bool "Support DM9161 PHY" depends on FEC_8XX default n + +config FEC_8XX_LXT971_PHY + bool "Support LXT971/LXT972 PHY" + depends on FEC_8XX + default n + diff --git a/drivers/net/fec_8xx/fec_mii.c b/drivers/net/fec_8xx/fec_mii.c index 803eb095cf8e..3b44ac1a7bfe 100644 --- a/drivers/net/fec_8xx/fec_mii.c +++ b/drivers/net/fec_8xx/fec_mii.c @@ -203,6 +203,39 @@ static void dm9161_shutdown(struct net_device *dev) #endif +#ifdef CONFIG_FEC_8XX_LXT971_PHY + +/* Support for LXT971/972 PHY */ + +#define MII_LXT971_PCR 16 /* Port Control Register */ +#define MII_LXT971_SR2 17 /* Status Register 2 */ +#define MII_LXT971_IER 18 /* Interrupt Enable Register */ +#define MII_LXT971_ISR 19 /* Interrupt Status Register */ +#define MII_LXT971_LCR 20 /* LED Control Register */ +#define MII_LXT971_TCR 30 /* Transmit Control Register */ + +static void lxt971_startup(struct net_device *dev) +{ + struct fec_enet_private *fep = netdev_priv(dev); + + fec_mii_write(dev, fep->mii_if.phy_id, MII_LXT971_IER, 0x00F2); +} + +static void lxt971_ack_int(struct net_device *dev) +{ + struct fec_enet_private *fep = netdev_priv(dev); + + fec_mii_read(dev, fep->mii_if.phy_id, MII_LXT971_ISR); +} + +static void lxt971_shutdown(struct net_device *dev) +{ + struct fec_enet_private *fep = netdev_priv(dev); + + fec_mii_write(dev, fep->mii_if.phy_id, MII_LXT971_IER, 0x0000); +} +#endif + /**********************************************************************************/ static const struct phy_info phy_info[] = { @@ -215,6 +248,15 @@ static const struct phy_info phy_info[] = { .shutdown = dm9161_shutdown, }, #endif +#ifdef CONFIG_FEC_8XX_LXT971_PHY + { + .id = 0x0001378e, + .name = "LXT971/972", + .startup = lxt971_startup, + .ack_int = lxt971_ack_int, + .shutdown = lxt971_shutdown, + }, +#endif #ifdef CONFIG_FEC_8XX_GENERIC_PHY { .id = 0, diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index 44fac7373289..9342d5bc7bb4 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -130,7 +130,7 @@ static int fs_enet_rx_napi(struct net_device *dev, int *budget) skb = fep->rx_skbuff[curidx]; - dma_unmap_single(fep->dev, skb->data, + dma_unmap_single(fep->dev, CBDR_BUFADDR(bdp), L1_CACHE_ALIGN(PKT_MAXBUF_SIZE), DMA_FROM_DEVICE); @@ -144,7 +144,7 @@ static int fs_enet_rx_napi(struct net_device *dev, int *budget) skb = fep->rx_skbuff[curidx]; - dma_unmap_single(fep->dev, skb->data, + dma_unmap_single(fep->dev, CBDR_BUFADDR(bdp), L1_CACHE_ALIGN(PKT_MAXBUF_SIZE), DMA_FROM_DEVICE); @@ -268,7 +268,7 @@ static int fs_enet_rx_non_napi(struct net_device *dev) skb = fep->rx_skbuff[curidx]; - dma_unmap_single(fep->dev, skb->data, + dma_unmap_single(fep->dev, CBDR_BUFADDR(bdp), L1_CACHE_ALIGN(PKT_MAXBUF_SIZE), DMA_FROM_DEVICE); @@ -278,7 +278,7 @@ static int fs_enet_rx_non_napi(struct net_device *dev) skb = fep->rx_skbuff[curidx]; - dma_unmap_single(fep->dev, skb->data, + dma_unmap_single(fep->dev, CBDR_BUFADDR(bdp), L1_CACHE_ALIGN(PKT_MAXBUF_SIZE), DMA_FROM_DEVICE); @@ -399,7 +399,8 @@ static void fs_enet_tx(struct net_device *dev) fep->stats.collisions++; /* unmap */ - dma_unmap_single(fep->dev, skb->data, skb->len, DMA_TO_DEVICE); + dma_unmap_single(fep->dev, CBDR_BUFADDR(bdp), + skb->len, DMA_TO_DEVICE); /* * Free the sk buffer associated with this last transmit. @@ -547,17 +548,19 @@ void fs_cleanup_bds(struct net_device *dev) { struct fs_enet_private *fep = netdev_priv(dev); struct sk_buff *skb; + cbd_t *bdp; int i; /* * Reset SKB transmit buffers. */ - for (i = 0; i < fep->tx_ring; i++) { + for (i = 0, bdp = fep->tx_bd_base; i < fep->tx_ring; i++, bdp++) { if ((skb = fep->tx_skbuff[i]) == NULL) continue; /* unmap */ - dma_unmap_single(fep->dev, skb->data, skb->len, DMA_TO_DEVICE); + dma_unmap_single(fep->dev, CBDR_BUFADDR(bdp), + skb->len, DMA_TO_DEVICE); fep->tx_skbuff[i] = NULL; dev_kfree_skb(skb); @@ -566,12 +569,12 @@ void fs_cleanup_bds(struct net_device *dev) /* * Reset SKB receive buffers */ - for (i = 0; i < fep->rx_ring; i++) { + for (i = 0, bdp = fep->rx_bd_base; i < fep->rx_ring; i++, bdp++) { if ((skb = fep->rx_skbuff[i]) == NULL) continue; /* unmap */ - dma_unmap_single(fep->dev, skb->data, + dma_unmap_single(fep->dev, CBDR_BUFADDR(bdp), L1_CACHE_ALIGN(PKT_MAXBUF_SIZE), DMA_FROM_DEVICE); diff --git a/drivers/net/ibm_emac/ibm_emac.h b/drivers/net/ibm_emac/ibm_emac.h index 28c476f28c20..644edbff4f94 100644 --- a/drivers/net/ibm_emac/ibm_emac.h +++ b/drivers/net/ibm_emac/ibm_emac.h @@ -26,7 +26,8 @@ /* This is a simple check to prevent use of this driver on non-tested SoCs */ #if !defined(CONFIG_405GP) && !defined(CONFIG_405GPR) && !defined(CONFIG_405EP) && \ !defined(CONFIG_440GP) && !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && \ - !defined(CONFIG_440EP) && !defined(CONFIG_NP405H) + !defined(CONFIG_440EP) && !defined(CONFIG_NP405H) && !defined(CONFIG_440SPE) && \ + !defined(CONFIG_440GR) #error "Unknown SoC. Please, check chip user manual and make sure EMAC defines are OK" #endif @@ -246,6 +247,25 @@ struct emac_regs { #define EMAC_STACR_PCDA_SHIFT 5 #define EMAC_STACR_PRA_MASK 0x1f +/* + * For the 440SPe, AMCC inexplicably changed the polarity of + * the "operation complete" bit in the MII control register. + */ +#if defined(CONFIG_440SPE) +static inline int emac_phy_done(u32 stacr) +{ + return !(stacr & EMAC_STACR_OC); +}; +#define EMAC_STACR_START EMAC_STACR_OC + +#else /* CONFIG_440SPE */ +static inline int emac_phy_done(u32 stacr) +{ + return stacr & EMAC_STACR_OC; +}; +#define EMAC_STACR_START 0 +#endif /* !CONFIG_440SPE */ + /* EMACx_TRTR */ #if !defined(CONFIG_IBM_EMAC4) #define EMAC_TRTR_SHIFT 27 diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c index 943fbd1546ff..eb7d69478715 100644 --- a/drivers/net/ibm_emac/ibm_emac_core.c +++ b/drivers/net/ibm_emac/ibm_emac_core.c @@ -87,10 +87,11 @@ MODULE_LICENSE("GPL"); */ static u32 busy_phy_map; -#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && (defined(CONFIG_405EP) || defined(CONFIG_440EP)) +#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && \ + (defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)) /* 405EP has "EMAC to PHY Control Register" (CPC0_EPCTL) which can help us * with PHY RX clock problem. - * 440EP has more sane SDR0_MFR register implementation than 440GX, which + * 440EP/440GR has more sane SDR0_MFR register implementation than 440GX, which * also allows controlling each EMAC clock */ static inline void EMAC_RX_CLK_TX(int idx) @@ -100,7 +101,7 @@ static inline void EMAC_RX_CLK_TX(int idx) #if defined(CONFIG_405EP) mtdcr(0xf3, mfdcr(0xf3) | (1 << idx)); -#else /* CONFIG_440EP */ +#else /* CONFIG_440EP || CONFIG_440GR */ SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) | (0x08000000 >> idx)); #endif @@ -546,7 +547,7 @@ static int __emac_mdio_read(struct ocp_enet_private *dev, u8 id, u8 reg) /* Wait for management interface to become idle */ n = 10; - while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) { + while (!emac_phy_done(in_be32(&p->stacr))) { udelay(1); if (!--n) goto to; @@ -556,11 +557,12 @@ static int __emac_mdio_read(struct ocp_enet_private *dev, u8 id, u8 reg) out_be32(&p->stacr, EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_READ | (reg & EMAC_STACR_PRA_MASK) - | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT)); + | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) + | EMAC_STACR_START); /* Wait for read to complete */ n = 100; - while (!((r = in_be32(&p->stacr)) & EMAC_STACR_OC)) { + while (!emac_phy_done(r = in_be32(&p->stacr))) { udelay(1); if (!--n) goto to; @@ -594,7 +596,7 @@ static void __emac_mdio_write(struct ocp_enet_private *dev, u8 id, u8 reg, /* Wait for management interface to be idle */ n = 10; - while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) { + while (!emac_phy_done(in_be32(&p->stacr))) { udelay(1); if (!--n) goto to; @@ -605,11 +607,11 @@ static void __emac_mdio_write(struct ocp_enet_private *dev, u8 id, u8 reg, EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_WRITE | (reg & EMAC_STACR_PRA_MASK) | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) | - (val << EMAC_STACR_PHYD_SHIFT)); + (val << EMAC_STACR_PHYD_SHIFT) | EMAC_STACR_START); /* Wait for write to complete */ n = 100; - while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) { + while (!emac_phy_done(in_be32(&p->stacr))) { udelay(1); if (!--n) goto to; diff --git a/drivers/net/ibm_emac/ibm_emac_mal.h b/drivers/net/ibm_emac/ibm_emac_mal.h index 15b0bdae26ac..2a2d3b24b037 100644 --- a/drivers/net/ibm_emac/ibm_emac_mal.h +++ b/drivers/net/ibm_emac/ibm_emac_mal.h @@ -32,9 +32,10 @@ * reflect the fact that 40x and 44x have slightly different MALs. --ebs */ #if defined(CONFIG_405GP) || defined(CONFIG_405GPR) || defined(CONFIG_405EP) || \ - defined(CONFIG_440EP) || defined(CONFIG_NP405H) + defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_NP405H) #define MAL_VERSION 1 -#elif defined(CONFIG_440GP) || defined(CONFIG_440GX) || defined(CONFIG_440SP) +#elif defined(CONFIG_440GP) || defined(CONFIG_440GX) || defined(CONFIG_440SP) || \ + defined(CONFIG_440SPE) #define MAL_VERSION 2 #else #error "Unknown SoC, please check chip manual and choose MAL 'version'" diff --git a/drivers/net/ibm_emac/ibm_emac_phy.c b/drivers/net/ibm_emac/ibm_emac_phy.c index a27e49cfe43b..67935dd33a65 100644 --- a/drivers/net/ibm_emac/ibm_emac_phy.c +++ b/drivers/net/ibm_emac/ibm_emac_phy.c @@ -236,12 +236,16 @@ static struct mii_phy_def genmii_phy_def = { }; /* CIS8201 */ +#define MII_CIS8201_10BTCSR 0x16 +#define TENBTCSR_ECHO_DISABLE 0x2000 #define MII_CIS8201_EPCR 0x17 #define EPCR_MODE_MASK 0x3000 #define EPCR_GMII_MODE 0x0000 #define EPCR_RGMII_MODE 0x1000 #define EPCR_TBI_MODE 0x2000 #define EPCR_RTBI_MODE 0x3000 +#define MII_CIS8201_ACSR 0x1c +#define ACSR_PIN_PRIO_SELECT 0x0004 static int cis8201_init(struct mii_phy *phy) { @@ -269,6 +273,14 @@ static int cis8201_init(struct mii_phy *phy) } phy_write(phy, MII_CIS8201_EPCR, epcr); + + /* MII regs override strap pins */ + phy_write(phy, MII_CIS8201_ACSR, + phy_read(phy, MII_CIS8201_ACSR) | ACSR_PIN_PRIO_SELECT); + + /* Disable TX_EN -> CRS echo mode, otherwise 10/HDX doesn't work */ + phy_write(phy, MII_CIS8201_10BTCSR, + phy_read(phy, MII_CIS8201_10BTCSR) | TENBTCSR_ECHO_DISABLE); return 0; } diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index 70fe81a89df9..be319229f543 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -22,8 +22,8 @@ *************************************************************************/ #define DRV_NAME "pcnet32" -#define DRV_VERSION "1.31a" -#define DRV_RELDATE "12.Sep.2005" +#define DRV_VERSION "1.31c" +#define DRV_RELDATE "01.Nov.2005" #define PFX DRV_NAME ": " static const char *version = @@ -260,6 +260,11 @@ static int homepna[MAX_UNITS]; * v1.31 02 Sep 2005 Hubert WS Lin <wslin@tw.ibm.c0m> added set_ringparam(). * v1.31a 12 Sep 2005 Hubert WS Lin <wslin@tw.ibm.c0m> set min ring size to 4 * to allow loopback test to work unchanged. + * v1.31b 06 Oct 2005 Don Fry changed alloc_ring to show name of device + * if allocation fails + * v1.31c 01 Nov 2005 Don Fry Allied Telesyn 2700/2701 FX are 100Mbit only. + * Force 100Mbit FD if Auto (ASEL) is selected. + * See Bugzilla 2669 and 4551. */ @@ -408,7 +413,7 @@ static int pcnet32_get_regs_len(struct net_device *dev); static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *ptr); static void pcnet32_purge_tx_ring(struct net_device *dev); -static int pcnet32_alloc_ring(struct net_device *dev); +static int pcnet32_alloc_ring(struct net_device *dev, char *name); static void pcnet32_free_ring(struct net_device *dev); @@ -669,15 +674,17 @@ static int pcnet32_set_ringparam(struct net_device *dev, struct ethtool_ringpara lp->rx_mod_mask = lp->rx_ring_size - 1; lp->rx_len_bits = (i << 4); - if (pcnet32_alloc_ring(dev)) { + if (pcnet32_alloc_ring(dev, dev->name)) { pcnet32_free_ring(dev); + spin_unlock_irqrestore(&lp->lock, flags); return -ENOMEM; } spin_unlock_irqrestore(&lp->lock, flags); if (pcnet32_debug & NETIF_MSG_DRV) - printk(KERN_INFO PFX "Ring Param Settings: RX: %d, TX: %d\n", lp->rx_ring_size, lp->tx_ring_size); + printk(KERN_INFO PFX "%s: Ring Param Settings: RX: %d, TX: %d\n", + dev->name, lp->rx_ring_size, lp->tx_ring_size); if (netif_running(dev)) pcnet32_open(dev); @@ -981,7 +988,11 @@ static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs, *buff++ = a->read_csr(ioaddr, 114); /* read bus configuration registers */ - for (i=0; i<36; i++) { + for (i=0; i<30; i++) { + *buff++ = a->read_bcr(ioaddr, i); + } + *buff++ = 0; /* skip bcr30 so as not to hang 79C976 */ + for (i=31; i<36; i++) { *buff++ = a->read_bcr(ioaddr, i); } @@ -1340,7 +1351,8 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) } lp->a = *a; - if (pcnet32_alloc_ring(dev)) { + /* prior to register_netdev, dev->name is not yet correct */ + if (pcnet32_alloc_ring(dev, pci_name(lp->pci_dev))) { ret = -ENOMEM; goto err_free_ring; } @@ -1448,48 +1460,63 @@ err_release_region: } -static int pcnet32_alloc_ring(struct net_device *dev) +/* if any allocation fails, caller must also call pcnet32_free_ring */ +static int pcnet32_alloc_ring(struct net_device *dev, char *name) { struct pcnet32_private *lp = dev->priv; - if ((lp->tx_ring = pci_alloc_consistent(lp->pci_dev, sizeof(struct pcnet32_tx_head) * lp->tx_ring_size, - &lp->tx_ring_dma_addr)) == NULL) { + lp->tx_ring = pci_alloc_consistent(lp->pci_dev, + sizeof(struct pcnet32_tx_head) * lp->tx_ring_size, + &lp->tx_ring_dma_addr); + if (lp->tx_ring == NULL) { if (pcnet32_debug & NETIF_MSG_DRV) - printk(KERN_ERR PFX "Consistent memory allocation failed.\n"); + printk("\n" KERN_ERR PFX "%s: Consistent memory allocation failed.\n", + name); return -ENOMEM; } - if ((lp->rx_ring = pci_alloc_consistent(lp->pci_dev, sizeof(struct pcnet32_rx_head) * lp->rx_ring_size, - &lp->rx_ring_dma_addr)) == NULL) { + lp->rx_ring = pci_alloc_consistent(lp->pci_dev, + sizeof(struct pcnet32_rx_head) * lp->rx_ring_size, + &lp->rx_ring_dma_addr); + if (lp->rx_ring == NULL) { if (pcnet32_debug & NETIF_MSG_DRV) - printk(KERN_ERR PFX "Consistent memory allocation failed.\n"); + printk("\n" KERN_ERR PFX "%s: Consistent memory allocation failed.\n", + name); return -ENOMEM; } - if (!(lp->tx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->tx_ring_size, GFP_ATOMIC))) { + lp->tx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->tx_ring_size, + GFP_ATOMIC); + if (!lp->tx_dma_addr) { if (pcnet32_debug & NETIF_MSG_DRV) - printk(KERN_ERR PFX "Memory allocation failed.\n"); + printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } memset(lp->tx_dma_addr, 0, sizeof(dma_addr_t) * lp->tx_ring_size); - if (!(lp->rx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->rx_ring_size, GFP_ATOMIC))) { + lp->rx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->rx_ring_size, + GFP_ATOMIC); + if (!lp->rx_dma_addr) { if (pcnet32_debug & NETIF_MSG_DRV) - printk(KERN_ERR PFX "Memory allocation failed.\n"); + printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } memset(lp->rx_dma_addr, 0, sizeof(dma_addr_t) * lp->rx_ring_size); - if (!(lp->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->tx_ring_size, GFP_ATOMIC))) { + lp->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->tx_ring_size, + GFP_ATOMIC); + if (!lp->tx_skbuff) { if (pcnet32_debug & NETIF_MSG_DRV) - printk(KERN_ERR PFX "Memory allocation failed.\n"); + printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } memset(lp->tx_skbuff, 0, sizeof(struct sk_buff *) * lp->tx_ring_size); - if (!(lp->rx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->rx_ring_size, GFP_ATOMIC))) { + lp->rx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->rx_ring_size, + GFP_ATOMIC); + if (!lp->rx_skbuff) { if (pcnet32_debug & NETIF_MSG_DRV) - printk(KERN_ERR PFX "Memory allocation failed.\n"); + printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } memset(lp->rx_skbuff, 0, sizeof(struct sk_buff *) * lp->rx_ring_size); @@ -1592,12 +1619,18 @@ pcnet32_open(struct net_device *dev) val |= 0x10; lp->a.write_csr (ioaddr, 124, val); - /* Allied Telesyn AT 2700/2701 FX looses the link, so skip that */ + /* Allied Telesyn AT 2700/2701 FX are 100Mbit only and do not negotiate */ if (lp->pci_dev->subsystem_vendor == PCI_VENDOR_ID_AT && - (lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX || - lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) { - printk(KERN_DEBUG "%s: Skipping PHY selection.\n", dev->name); - } else { + (lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX || + lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) { + if (lp->options & PCNET32_PORT_ASEL) { + lp->options = PCNET32_PORT_FD | PCNET32_PORT_100; + if (netif_msg_link(lp)) + printk(KERN_DEBUG "%s: Setting 100Mb-Full Duplex.\n", + dev->name); + } + } + { /* * 24 Jun 2004 according AMD, in order to change the PHY, * DANAS (or DISPM for 79C976) must be set; then select the speed, diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index ad93b0da87f0..5eab9c42a111 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -61,6 +61,9 @@ int mdiobus_register(struct mii_bus *bus) for (i = 0; i < PHY_MAX_ADDR; i++) { struct phy_device *phydev; + if (bus->phy_mask & (1 << i)) + continue; + phydev = get_phy_device(bus, i); if (IS_ERR(phydev)) diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 3f5e93aad5c7..9c4935407f26 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -30,6 +30,8 @@ * in the driver. * rx_ring_sz: This defines the number of descriptors each ring can have. This * is also an array of size 8. + * rx_ring_mode: This defines the operation mode of all 8 rings. The valid + * values are 1, 2 and 3. * tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver. * tx_fifo_len: This too is an array of 8. Each element defines the number of * Tx descriptors that can be associated with each corresponding FIFO. @@ -65,12 +67,15 @@ #include "s2io.h" #include "s2io-regs.h" -#define DRV_VERSION "Version 2.0.9.1" +#define DRV_VERSION "Version 2.0.9.3" /* S2io Driver name & version. */ static char s2io_driver_name[] = "Neterion"; static char s2io_driver_version[] = DRV_VERSION; +int rxd_size[4] = {32,48,48,64}; +int rxd_count[4] = {127,85,85,63}; + static inline int RXD_IS_UP2DT(RxD_t *rxdp) { int ret; @@ -104,7 +109,7 @@ static inline int rx_buffer_level(nic_t * sp, int rxb_size, int ring) mac_control = &sp->mac_control; if ((mac_control->rings[ring].pkt_cnt - rxb_size) > 16) { level = LOW; - if (rxb_size <= MAX_RXDS_PER_BLOCK) { + if (rxb_size <= rxd_count[sp->rxd_mode]) { level = PANIC; } } @@ -296,6 +301,7 @@ static unsigned int rx_ring_sz[MAX_RX_RINGS] = {[0 ...(MAX_RX_RINGS - 1)] = 0 }; static unsigned int rts_frm_len[MAX_RX_RINGS] = {[0 ...(MAX_RX_RINGS - 1)] = 0 }; +static unsigned int rx_ring_mode = 1; static unsigned int use_continuous_tx_intrs = 1; static unsigned int rmac_pause_time = 65535; static unsigned int mc_pause_threshold_q0q3 = 187; @@ -304,6 +310,7 @@ static unsigned int shared_splits; static unsigned int tmac_util_period = 5; static unsigned int rmac_util_period = 5; static unsigned int bimodal = 0; +static unsigned int l3l4hdr_size = 128; #ifndef CONFIG_S2IO_NAPI static unsigned int indicate_max_pkts; #endif @@ -357,10 +364,8 @@ static int init_shared_mem(struct s2io_nic *nic) int i, j, blk_cnt, rx_sz, tx_sz; int lst_size, lst_per_page; struct net_device *dev = nic->dev; -#ifdef CONFIG_2BUFF_MODE unsigned long tmp; buffAdd_t *ba; -#endif mac_info_t *mac_control; struct config_param *config; @@ -458,7 +463,8 @@ static int init_shared_mem(struct s2io_nic *nic) /* Allocation and initialization of RXDs in Rings */ size = 0; for (i = 0; i < config->rx_ring_num; i++) { - if (config->rx_cfg[i].num_rxd % (MAX_RXDS_PER_BLOCK + 1)) { + if (config->rx_cfg[i].num_rxd % + (rxd_count[nic->rxd_mode] + 1)) { DBG_PRINT(ERR_DBG, "%s: RxD count of ", dev->name); DBG_PRINT(ERR_DBG, "Ring%d is not a multiple of ", i); @@ -467,11 +473,15 @@ static int init_shared_mem(struct s2io_nic *nic) } size += config->rx_cfg[i].num_rxd; mac_control->rings[i].block_count = - config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1); - mac_control->rings[i].pkt_cnt = - config->rx_cfg[i].num_rxd - mac_control->rings[i].block_count; + config->rx_cfg[i].num_rxd / + (rxd_count[nic->rxd_mode] + 1 ); + mac_control->rings[i].pkt_cnt = config->rx_cfg[i].num_rxd - + mac_control->rings[i].block_count; } - size = (size * (sizeof(RxD_t))); + if (nic->rxd_mode == RXD_MODE_1) + size = (size * (sizeof(RxD1_t))); + else + size = (size * (sizeof(RxD3_t))); rx_sz = size; for (i = 0; i < config->rx_ring_num; i++) { @@ -486,15 +496,15 @@ static int init_shared_mem(struct s2io_nic *nic) mac_control->rings[i].nic = nic; mac_control->rings[i].ring_no = i; - blk_cnt = - config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1); + blk_cnt = config->rx_cfg[i].num_rxd / + (rxd_count[nic->rxd_mode] + 1); /* Allocating all the Rx blocks */ for (j = 0; j < blk_cnt; j++) { -#ifndef CONFIG_2BUFF_MODE - size = (MAX_RXDS_PER_BLOCK + 1) * (sizeof(RxD_t)); -#else - size = SIZE_OF_BLOCK; -#endif + rx_block_info_t *rx_blocks; + int l; + + rx_blocks = &mac_control->rings[i].rx_blocks[j]; + size = SIZE_OF_BLOCK; //size is always page size tmp_v_addr = pci_alloc_consistent(nic->pdev, size, &tmp_p_addr); if (tmp_v_addr == NULL) { @@ -504,11 +514,24 @@ static int init_shared_mem(struct s2io_nic *nic) * memory that was alloced till the * failure happened. */ - mac_control->rings[i].rx_blocks[j].block_virt_addr = - tmp_v_addr; + rx_blocks->block_virt_addr = tmp_v_addr; return -ENOMEM; } memset(tmp_v_addr, 0, size); + rx_blocks->block_virt_addr = tmp_v_addr; + rx_blocks->block_dma_addr = tmp_p_addr; + rx_blocks->rxds = kmalloc(sizeof(rxd_info_t)* + rxd_count[nic->rxd_mode], + GFP_KERNEL); + for (l=0; l<rxd_count[nic->rxd_mode];l++) { + rx_blocks->rxds[l].virt_addr = + rx_blocks->block_virt_addr + + (rxd_size[nic->rxd_mode] * l); + rx_blocks->rxds[l].dma_addr = + rx_blocks->block_dma_addr + + (rxd_size[nic->rxd_mode] * l); + } + mac_control->rings[i].rx_blocks[j].block_virt_addr = tmp_v_addr; mac_control->rings[i].rx_blocks[j].block_dma_addr = @@ -528,62 +551,58 @@ static int init_shared_mem(struct s2io_nic *nic) blk_cnt].block_dma_addr; pre_rxd_blk = (RxD_block_t *) tmp_v_addr; - pre_rxd_blk->reserved_1 = END_OF_BLOCK; /* last RxD - * marker. - */ -#ifndef CONFIG_2BUFF_MODE pre_rxd_blk->reserved_2_pNext_RxD_block = (unsigned long) tmp_v_addr_next; -#endif pre_rxd_blk->pNext_RxD_Blk_physical = (u64) tmp_p_addr_next; } } - -#ifdef CONFIG_2BUFF_MODE - /* - * Allocation of Storages for buffer addresses in 2BUFF mode - * and the buffers as well. - */ - for (i = 0; i < config->rx_ring_num; i++) { - blk_cnt = - config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1); - mac_control->rings[i].ba = kmalloc((sizeof(buffAdd_t *) * blk_cnt), + if (nic->rxd_mode >= RXD_MODE_3A) { + /* + * Allocation of Storages for buffer addresses in 2BUFF mode + * and the buffers as well. + */ + for (i = 0; i < config->rx_ring_num; i++) { + blk_cnt = config->rx_cfg[i].num_rxd / + (rxd_count[nic->rxd_mode]+ 1); + mac_control->rings[i].ba = + kmalloc((sizeof(buffAdd_t *) * blk_cnt), GFP_KERNEL); - if (!mac_control->rings[i].ba) - return -ENOMEM; - for (j = 0; j < blk_cnt; j++) { - int k = 0; - mac_control->rings[i].ba[j] = kmalloc((sizeof(buffAdd_t) * - (MAX_RXDS_PER_BLOCK + 1)), - GFP_KERNEL); - if (!mac_control->rings[i].ba[j]) + if (!mac_control->rings[i].ba) return -ENOMEM; - while (k != MAX_RXDS_PER_BLOCK) { - ba = &mac_control->rings[i].ba[j][k]; - - ba->ba_0_org = (void *) kmalloc - (BUF0_LEN + ALIGN_SIZE, GFP_KERNEL); - if (!ba->ba_0_org) - return -ENOMEM; - tmp = (unsigned long) ba->ba_0_org; - tmp += ALIGN_SIZE; - tmp &= ~((unsigned long) ALIGN_SIZE); - ba->ba_0 = (void *) tmp; - - ba->ba_1_org = (void *) kmalloc - (BUF1_LEN + ALIGN_SIZE, GFP_KERNEL); - if (!ba->ba_1_org) + for (j = 0; j < blk_cnt; j++) { + int k = 0; + mac_control->rings[i].ba[j] = + kmalloc((sizeof(buffAdd_t) * + (rxd_count[nic->rxd_mode] + 1)), + GFP_KERNEL); + if (!mac_control->rings[i].ba[j]) return -ENOMEM; - tmp = (unsigned long) ba->ba_1_org; - tmp += ALIGN_SIZE; - tmp &= ~((unsigned long) ALIGN_SIZE); - ba->ba_1 = (void *) tmp; - k++; + while (k != rxd_count[nic->rxd_mode]) { + ba = &mac_control->rings[i].ba[j][k]; + + ba->ba_0_org = (void *) kmalloc + (BUF0_LEN + ALIGN_SIZE, GFP_KERNEL); + if (!ba->ba_0_org) + return -ENOMEM; + tmp = (unsigned long)ba->ba_0_org; + tmp += ALIGN_SIZE; + tmp &= ~((unsigned long) ALIGN_SIZE); + ba->ba_0 = (void *) tmp; + + ba->ba_1_org = (void *) kmalloc + (BUF1_LEN + ALIGN_SIZE, GFP_KERNEL); + if (!ba->ba_1_org) + return -ENOMEM; + tmp = (unsigned long) ba->ba_1_org; + tmp += ALIGN_SIZE; + tmp &= ~((unsigned long) ALIGN_SIZE); + ba->ba_1 = (void *) tmp; + k++; + } } } } -#endif /* Allocation and initialization of Statistics block */ size = sizeof(StatInfo_t); @@ -669,11 +688,7 @@ static void free_shared_mem(struct s2io_nic *nic) kfree(mac_control->fifos[i].list_info); } -#ifndef CONFIG_2BUFF_MODE - size = (MAX_RXDS_PER_BLOCK + 1) * (sizeof(RxD_t)); -#else size = SIZE_OF_BLOCK; -#endif for (i = 0; i < config->rx_ring_num; i++) { blk_cnt = mac_control->rings[i].block_count; for (j = 0; j < blk_cnt; j++) { @@ -685,29 +700,31 @@ static void free_shared_mem(struct s2io_nic *nic) break; pci_free_consistent(nic->pdev, size, tmp_v_addr, tmp_p_addr); + kfree(mac_control->rings[i].rx_blocks[j].rxds); } } -#ifdef CONFIG_2BUFF_MODE - /* Freeing buffer storage addresses in 2BUFF mode. */ - for (i = 0; i < config->rx_ring_num; i++) { - blk_cnt = - config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1); - for (j = 0; j < blk_cnt; j++) { - int k = 0; - if (!mac_control->rings[i].ba[j]) - continue; - while (k != MAX_RXDS_PER_BLOCK) { - buffAdd_t *ba = &mac_control->rings[i].ba[j][k]; - kfree(ba->ba_0_org); - kfree(ba->ba_1_org); - k++; + if (nic->rxd_mode >= RXD_MODE_3A) { + /* Freeing buffer storage addresses in 2BUFF mode. */ + for (i = 0; i < config->rx_ring_num; i++) { + blk_cnt = config->rx_cfg[i].num_rxd / + (rxd_count[nic->rxd_mode] + 1); + for (j = 0; j < blk_cnt; j++) { + int k = 0; + if (!mac_control->rings[i].ba[j]) + continue; + while (k != rxd_count[nic->rxd_mode]) { + buffAdd_t *ba = + &mac_control->rings[i].ba[j][k]; + kfree(ba->ba_0_org); + kfree(ba->ba_1_org); + k++; + } + kfree(mac_control->rings[i].ba[j]); } - kfree(mac_control->rings[i].ba[j]); + kfree(mac_control->rings[i].ba); } - kfree(mac_control->rings[i].ba); } -#endif if (mac_control->stats_mem) { pci_free_consistent(nic->pdev, @@ -1894,20 +1911,19 @@ static int start_nic(struct s2io_nic *nic) val64 = readq(&bar0->prc_ctrl_n[i]); if (nic->config.bimodal) val64 |= PRC_CTRL_BIMODAL_INTERRUPT; -#ifndef CONFIG_2BUFF_MODE - val64 |= PRC_CTRL_RC_ENABLED; -#else - val64 |= PRC_CTRL_RC_ENABLED | PRC_CTRL_RING_MODE_3; -#endif + if (nic->rxd_mode == RXD_MODE_1) + val64 |= PRC_CTRL_RC_ENABLED; + else + val64 |= PRC_CTRL_RC_ENABLED | PRC_CTRL_RING_MODE_3; writeq(val64, &bar0->prc_ctrl_n[i]); } -#ifdef CONFIG_2BUFF_MODE - /* Enabling 2 buffer mode by writing into Rx_pa_cfg reg. */ - val64 = readq(&bar0->rx_pa_cfg); - val64 |= RX_PA_CFG_IGNORE_L2_ERR; - writeq(val64, &bar0->rx_pa_cfg); -#endif + if (nic->rxd_mode == RXD_MODE_3B) { + /* Enabling 2 buffer mode by writing into Rx_pa_cfg reg. */ + val64 = readq(&bar0->rx_pa_cfg); + val64 |= RX_PA_CFG_IGNORE_L2_ERR; + writeq(val64, &bar0->rx_pa_cfg); + } /* * Enabling MC-RLDRAM. After enabling the device, we timeout @@ -2090,6 +2106,41 @@ static void stop_nic(struct s2io_nic *nic) } } +int fill_rxd_3buf(nic_t *nic, RxD_t *rxdp, struct sk_buff *skb) +{ + struct net_device *dev = nic->dev; + struct sk_buff *frag_list; + u64 tmp; + + /* Buffer-1 receives L3/L4 headers */ + ((RxD3_t*)rxdp)->Buffer1_ptr = pci_map_single + (nic->pdev, skb->data, l3l4hdr_size + 4, + PCI_DMA_FROMDEVICE); + + /* skb_shinfo(skb)->frag_list will have L4 data payload */ + skb_shinfo(skb)->frag_list = dev_alloc_skb(dev->mtu + ALIGN_SIZE); + if (skb_shinfo(skb)->frag_list == NULL) { + DBG_PRINT(ERR_DBG, "%s: dev_alloc_skb failed\n ", dev->name); + return -ENOMEM ; + } + frag_list = skb_shinfo(skb)->frag_list; + frag_list->next = NULL; + tmp = (u64) frag_list->data; + tmp += ALIGN_SIZE; + tmp &= ~ALIGN_SIZE; + frag_list->data = (void *) tmp; + frag_list->tail = (void *) tmp; + + /* Buffer-2 receives L4 data payload */ + ((RxD3_t*)rxdp)->Buffer2_ptr = pci_map_single(nic->pdev, + frag_list->data, dev->mtu, + PCI_DMA_FROMDEVICE); + rxdp->Control_2 |= SET_BUFFER1_SIZE_3(l3l4hdr_size + 4); + rxdp->Control_2 |= SET_BUFFER2_SIZE_3(dev->mtu); + + return SUCCESS; +} + /** * fill_rx_buffers - Allocates the Rx side skbs * @nic: device private variable @@ -2117,18 +2168,12 @@ int fill_rx_buffers(struct s2io_nic *nic, int ring_no) struct sk_buff *skb; RxD_t *rxdp; int off, off1, size, block_no, block_no1; - int offset, offset1; u32 alloc_tab = 0; u32 alloc_cnt; mac_info_t *mac_control; struct config_param *config; -#ifdef CONFIG_2BUFF_MODE - RxD_t *rxdpnext; - int nextblk; u64 tmp; buffAdd_t *ba; - dma_addr_t rxdpphys; -#endif #ifndef CONFIG_S2IO_NAPI unsigned long flags; #endif @@ -2138,8 +2183,6 @@ int fill_rx_buffers(struct s2io_nic *nic, int ring_no) config = &nic->config; alloc_cnt = mac_control->rings[ring_no].pkt_cnt - atomic_read(&nic->rx_bufs_left[ring_no]); - size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE + - HEADER_802_2_SIZE + HEADER_SNAP_SIZE; while (alloc_tab < alloc_cnt) { block_no = mac_control->rings[ring_no].rx_curr_put_info. @@ -2148,159 +2191,145 @@ int fill_rx_buffers(struct s2io_nic *nic, int ring_no) block_index; off = mac_control->rings[ring_no].rx_curr_put_info.offset; off1 = mac_control->rings[ring_no].rx_curr_get_info.offset; -#ifndef CONFIG_2BUFF_MODE - offset = block_no * (MAX_RXDS_PER_BLOCK + 1) + off; - offset1 = block_no1 * (MAX_RXDS_PER_BLOCK + 1) + off1; -#else - offset = block_no * (MAX_RXDS_PER_BLOCK) + off; - offset1 = block_no1 * (MAX_RXDS_PER_BLOCK) + off1; -#endif - rxdp = mac_control->rings[ring_no].rx_blocks[block_no]. - block_virt_addr + off; - if ((offset == offset1) && (rxdp->Host_Control)) { - DBG_PRINT(INTR_DBG, "%s: Get and Put", dev->name); + rxdp = mac_control->rings[ring_no]. + rx_blocks[block_no].rxds[off].virt_addr; + + if ((block_no == block_no1) && (off == off1) && + (rxdp->Host_Control)) { + DBG_PRINT(INTR_DBG, "%s: Get and Put", + dev->name); DBG_PRINT(INTR_DBG, " info equated\n"); goto end; } -#ifndef CONFIG_2BUFF_MODE - if (rxdp->Control_1 == END_OF_BLOCK) { + if (off && (off == rxd_count[nic->rxd_mode])) { mac_control->rings[ring_no].rx_curr_put_info. block_index++; + if (mac_control->rings[ring_no].rx_curr_put_info. + block_index == mac_control->rings[ring_no]. + block_count) + mac_control->rings[ring_no].rx_curr_put_info. + block_index = 0; + block_no = mac_control->rings[ring_no]. + rx_curr_put_info.block_index; + if (off == rxd_count[nic->rxd_mode]) + off = 0; mac_control->rings[ring_no].rx_curr_put_info. - block_index %= mac_control->rings[ring_no].block_count; - block_no = mac_control->rings[ring_no].rx_curr_put_info. - block_index; - off++; - off %= (MAX_RXDS_PER_BLOCK + 1); - mac_control->rings[ring_no].rx_curr_put_info.offset = - off; - rxdp = (RxD_t *) ((unsigned long) rxdp->Control_2); + offset = off; + rxdp = mac_control->rings[ring_no]. + rx_blocks[block_no].block_virt_addr; DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n", dev->name, rxdp); } #ifndef CONFIG_S2IO_NAPI spin_lock_irqsave(&nic->put_lock, flags); mac_control->rings[ring_no].put_pos = - (block_no * (MAX_RXDS_PER_BLOCK + 1)) + off; + (block_no * (rxd_count[nic->rxd_mode] + 1)) + off; spin_unlock_irqrestore(&nic->put_lock, flags); #endif -#else - if (rxdp->Host_Control == END_OF_BLOCK) { + if ((rxdp->Control_1 & RXD_OWN_XENA) && + ((nic->rxd_mode >= RXD_MODE_3A) && + (rxdp->Control_2 & BIT(0)))) { mac_control->rings[ring_no].rx_curr_put_info. - block_index++; - mac_control->rings[ring_no].rx_curr_put_info.block_index - %= mac_control->rings[ring_no].block_count; - block_no = mac_control->rings[ring_no].rx_curr_put_info - .block_index; - off = 0; - DBG_PRINT(INTR_DBG, "%s: block%d at: 0x%llx\n", - dev->name, block_no, - (unsigned long long) rxdp->Control_1); - mac_control->rings[ring_no].rx_curr_put_info.offset = - off; - rxdp = mac_control->rings[ring_no].rx_blocks[block_no]. - block_virt_addr; - } -#ifndef CONFIG_S2IO_NAPI - spin_lock_irqsave(&nic->put_lock, flags); - mac_control->rings[ring_no].put_pos = (block_no * - (MAX_RXDS_PER_BLOCK + 1)) + off; - spin_unlock_irqrestore(&nic->put_lock, flags); -#endif -#endif - -#ifndef CONFIG_2BUFF_MODE - if (rxdp->Control_1 & RXD_OWN_XENA) -#else - if (rxdp->Control_2 & BIT(0)) -#endif - { - mac_control->rings[ring_no].rx_curr_put_info. - offset = off; + offset = off; goto end; } -#ifdef CONFIG_2BUFF_MODE - /* - * RxDs Spanning cache lines will be replenished only - * if the succeeding RxD is also owned by Host. It - * will always be the ((8*i)+3) and ((8*i)+6) - * descriptors for the 48 byte descriptor. The offending - * decsriptor is of-course the 3rd descriptor. - */ - rxdpphys = mac_control->rings[ring_no].rx_blocks[block_no]. - block_dma_addr + (off * sizeof(RxD_t)); - if (((u64) (rxdpphys)) % 128 > 80) { - rxdpnext = mac_control->rings[ring_no].rx_blocks[block_no]. - block_virt_addr + (off + 1); - if (rxdpnext->Host_Control == END_OF_BLOCK) { - nextblk = (block_no + 1) % - (mac_control->rings[ring_no].block_count); - rxdpnext = mac_control->rings[ring_no].rx_blocks - [nextblk].block_virt_addr; - } - if (rxdpnext->Control_2 & BIT(0)) - goto end; - } -#endif + /* calculate size of skb based on ring mode */ + size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE + + HEADER_802_2_SIZE + HEADER_SNAP_SIZE; + if (nic->rxd_mode == RXD_MODE_1) + size += NET_IP_ALIGN; + else if (nic->rxd_mode == RXD_MODE_3B) + size = dev->mtu + ALIGN_SIZE + BUF0_LEN + 4; + else + size = l3l4hdr_size + ALIGN_SIZE + BUF0_LEN + 4; -#ifndef CONFIG_2BUFF_MODE - skb = dev_alloc_skb(size + NET_IP_ALIGN); -#else - skb = dev_alloc_skb(dev->mtu + ALIGN_SIZE + BUF0_LEN + 4); -#endif - if (!skb) { + /* allocate skb */ + skb = dev_alloc_skb(size); + if(!skb) { DBG_PRINT(ERR_DBG, "%s: Out of ", dev->name); DBG_PRINT(ERR_DBG, "memory to allocate SKBs\n"); if (first_rxdp) { wmb(); first_rxdp->Control_1 |= RXD_OWN_XENA; } - return -ENOMEM; + return -ENOMEM ; + } + if (nic->rxd_mode == RXD_MODE_1) { + /* 1 buffer mode - normal operation mode */ + memset(rxdp, 0, sizeof(RxD1_t)); + skb_reserve(skb, NET_IP_ALIGN); + ((RxD1_t*)rxdp)->Buffer0_ptr = pci_map_single + (nic->pdev, skb->data, size, PCI_DMA_FROMDEVICE); + rxdp->Control_2 &= (~MASK_BUFFER0_SIZE_1); + rxdp->Control_2 |= SET_BUFFER0_SIZE_1(size); + + } else if (nic->rxd_mode >= RXD_MODE_3A) { + /* + * 2 or 3 buffer mode - + * Both 2 buffer mode and 3 buffer mode provides 128 + * byte aligned receive buffers. + * + * 3 buffer mode provides header separation where in + * skb->data will have L3/L4 headers where as + * skb_shinfo(skb)->frag_list will have the L4 data + * payload + */ + + memset(rxdp, 0, sizeof(RxD3_t)); + ba = &mac_control->rings[ring_no].ba[block_no][off]; + skb_reserve(skb, BUF0_LEN); + tmp = (u64)(unsigned long) skb->data; + tmp += ALIGN_SIZE; + tmp &= ~ALIGN_SIZE; + skb->data = (void *) (unsigned long)tmp; + skb->tail = (void *) (unsigned long)tmp; + + ((RxD3_t*)rxdp)->Buffer0_ptr = + pci_map_single(nic->pdev, ba->ba_0, BUF0_LEN, + PCI_DMA_FROMDEVICE); + rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN); + if (nic->rxd_mode == RXD_MODE_3B) { + /* Two buffer mode */ + + /* + * Buffer2 will have L3/L4 header plus + * L4 payload + */ + ((RxD3_t*)rxdp)->Buffer2_ptr = pci_map_single + (nic->pdev, skb->data, dev->mtu + 4, + PCI_DMA_FROMDEVICE); + + /* Buffer-1 will be dummy buffer not used */ + ((RxD3_t*)rxdp)->Buffer1_ptr = + pci_map_single(nic->pdev, ba->ba_1, BUF1_LEN, + PCI_DMA_FROMDEVICE); + rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1); + rxdp->Control_2 |= SET_BUFFER2_SIZE_3 + (dev->mtu + 4); + } else { + /* 3 buffer mode */ + if (fill_rxd_3buf(nic, rxdp, skb) == -ENOMEM) { + dev_kfree_skb_irq(skb); + if (first_rxdp) { + wmb(); + first_rxdp->Control_1 |= + RXD_OWN_XENA; + } + return -ENOMEM ; + } + } + rxdp->Control_2 |= BIT(0); } -#ifndef CONFIG_2BUFF_MODE - skb_reserve(skb, NET_IP_ALIGN); - memset(rxdp, 0, sizeof(RxD_t)); - rxdp->Buffer0_ptr = pci_map_single - (nic->pdev, skb->data, size, PCI_DMA_FROMDEVICE); - rxdp->Control_2 &= (~MASK_BUFFER0_SIZE); - rxdp->Control_2 |= SET_BUFFER0_SIZE(size); rxdp->Host_Control = (unsigned long) (skb); if (alloc_tab & ((1 << rxsync_frequency) - 1)) rxdp->Control_1 |= RXD_OWN_XENA; off++; - off %= (MAX_RXDS_PER_BLOCK + 1); - mac_control->rings[ring_no].rx_curr_put_info.offset = off; -#else - ba = &mac_control->rings[ring_no].ba[block_no][off]; - skb_reserve(skb, BUF0_LEN); - tmp = ((unsigned long) skb->data & ALIGN_SIZE); - if (tmp) - skb_reserve(skb, (ALIGN_SIZE + 1) - tmp); - - memset(rxdp, 0, sizeof(RxD_t)); - rxdp->Buffer2_ptr = pci_map_single - (nic->pdev, skb->data, dev->mtu + BUF0_LEN + 4, - PCI_DMA_FROMDEVICE); - rxdp->Buffer0_ptr = - pci_map_single(nic->pdev, ba->ba_0, BUF0_LEN, - PCI_DMA_FROMDEVICE); - rxdp->Buffer1_ptr = - pci_map_single(nic->pdev, ba->ba_1, BUF1_LEN, - PCI_DMA_FROMDEVICE); - - rxdp->Control_2 = SET_BUFFER2_SIZE(dev->mtu + 4); - rxdp->Control_2 |= SET_BUFFER0_SIZE(BUF0_LEN); - rxdp->Control_2 |= SET_BUFFER1_SIZE(1); /* dummy. */ - rxdp->Control_2 |= BIT(0); /* Set Buffer_Empty bit. */ - rxdp->Host_Control = (u64) ((unsigned long) (skb)); - if (alloc_tab & ((1 << rxsync_frequency) - 1)) - rxdp->Control_1 |= RXD_OWN_XENA; - off++; + if (off == (rxd_count[nic->rxd_mode] + 1)) + off = 0; mac_control->rings[ring_no].rx_curr_put_info.offset = off; -#endif - rxdp->Control_2 |= SET_RXD_MARKER; + rxdp->Control_2 |= SET_RXD_MARKER; if (!(alloc_tab & ((1 << rxsync_frequency) - 1))) { if (first_rxdp) { wmb(); @@ -2325,6 +2354,67 @@ int fill_rx_buffers(struct s2io_nic *nic, int ring_no) return SUCCESS; } +static void free_rxd_blk(struct s2io_nic *sp, int ring_no, int blk) +{ + struct net_device *dev = sp->dev; + int j; + struct sk_buff *skb; + RxD_t *rxdp; + mac_info_t *mac_control; + buffAdd_t *ba; + + mac_control = &sp->mac_control; + for (j = 0 ; j < rxd_count[sp->rxd_mode]; j++) { + rxdp = mac_control->rings[ring_no]. + rx_blocks[blk].rxds[j].virt_addr; + skb = (struct sk_buff *) + ((unsigned long) rxdp->Host_Control); + if (!skb) { + continue; + } + if (sp->rxd_mode == RXD_MODE_1) { + pci_unmap_single(sp->pdev, (dma_addr_t) + ((RxD1_t*)rxdp)->Buffer0_ptr, + dev->mtu + + HEADER_ETHERNET_II_802_3_SIZE + + HEADER_802_2_SIZE + + HEADER_SNAP_SIZE, + PCI_DMA_FROMDEVICE); + memset(rxdp, 0, sizeof(RxD1_t)); + } else if(sp->rxd_mode == RXD_MODE_3B) { + ba = &mac_control->rings[ring_no]. + ba[blk][j]; + pci_unmap_single(sp->pdev, (dma_addr_t) + ((RxD3_t*)rxdp)->Buffer0_ptr, + BUF0_LEN, + PCI_DMA_FROMDEVICE); + pci_unmap_single(sp->pdev, (dma_addr_t) + ((RxD3_t*)rxdp)->Buffer1_ptr, + BUF1_LEN, + PCI_DMA_FROMDEVICE); + pci_unmap_single(sp->pdev, (dma_addr_t) + ((RxD3_t*)rxdp)->Buffer2_ptr, + dev->mtu + 4, + PCI_DMA_FROMDEVICE); + memset(rxdp, 0, sizeof(RxD3_t)); + } else { + pci_unmap_single(sp->pdev, (dma_addr_t) + ((RxD3_t*)rxdp)->Buffer0_ptr, BUF0_LEN, + PCI_DMA_FROMDEVICE); + pci_unmap_single(sp->pdev, (dma_addr_t) + ((RxD3_t*)rxdp)->Buffer1_ptr, + l3l4hdr_size + 4, + PCI_DMA_FROMDEVICE); + pci_unmap_single(sp->pdev, (dma_addr_t) + ((RxD3_t*)rxdp)->Buffer2_ptr, dev->mtu, + PCI_DMA_FROMDEVICE); + memset(rxdp, 0, sizeof(RxD3_t)); + } + dev_kfree_skb(skb); + atomic_dec(&sp->rx_bufs_left[ring_no]); + } +} + /** * free_rx_buffers - Frees all Rx buffers * @sp: device private variable. @@ -2337,77 +2427,17 @@ int fill_rx_buffers(struct s2io_nic *nic, int ring_no) static void free_rx_buffers(struct s2io_nic *sp) { struct net_device *dev = sp->dev; - int i, j, blk = 0, off, buf_cnt = 0; - RxD_t *rxdp; - struct sk_buff *skb; + int i, blk = 0, buf_cnt = 0; mac_info_t *mac_control; struct config_param *config; -#ifdef CONFIG_2BUFF_MODE - buffAdd_t *ba; -#endif mac_control = &sp->mac_control; config = &sp->config; for (i = 0; i < config->rx_ring_num; i++) { - for (j = 0, blk = 0; j < config->rx_cfg[i].num_rxd; j++) { - off = j % (MAX_RXDS_PER_BLOCK + 1); - rxdp = mac_control->rings[i].rx_blocks[blk]. - block_virt_addr + off; - -#ifndef CONFIG_2BUFF_MODE - if (rxdp->Control_1 == END_OF_BLOCK) { - rxdp = - (RxD_t *) ((unsigned long) rxdp-> - Control_2); - j++; - blk++; - } -#else - if (rxdp->Host_Control == END_OF_BLOCK) { - blk++; - continue; - } -#endif + for (blk = 0; blk < rx_ring_sz[i]; blk++) + free_rxd_blk(sp,i,blk); - if (!(rxdp->Control_1 & RXD_OWN_XENA)) { - memset(rxdp, 0, sizeof(RxD_t)); - continue; - } - - skb = - (struct sk_buff *) ((unsigned long) rxdp-> - Host_Control); - if (skb) { -#ifndef CONFIG_2BUFF_MODE - pci_unmap_single(sp->pdev, (dma_addr_t) - rxdp->Buffer0_ptr, - dev->mtu + - HEADER_ETHERNET_II_802_3_SIZE - + HEADER_802_2_SIZE + - HEADER_SNAP_SIZE, - PCI_DMA_FROMDEVICE); -#else - ba = &mac_control->rings[i].ba[blk][off]; - pci_unmap_single(sp->pdev, (dma_addr_t) - rxdp->Buffer0_ptr, - BUF0_LEN, - PCI_DMA_FROMDEVICE); - pci_unmap_single(sp->pdev, (dma_addr_t) - rxdp->Buffer1_ptr, - BUF1_LEN, - PCI_DMA_FROMDEVICE); - pci_unmap_single(sp->pdev, (dma_addr_t) - rxdp->Buffer2_ptr, - dev->mtu + BUF0_LEN + 4, - PCI_DMA_FROMDEVICE); -#endif - dev_kfree_skb(skb); - atomic_dec(&sp->rx_bufs_left[i]); - buf_cnt++; - } - memset(rxdp, 0, sizeof(RxD_t)); - } mac_control->rings[i].rx_curr_put_info.block_index = 0; mac_control->rings[i].rx_curr_get_info.block_index = 0; mac_control->rings[i].rx_curr_put_info.offset = 0; @@ -2513,7 +2543,7 @@ static void rx_intr_handler(ring_info_t *ring_data) { nic_t *nic = ring_data->nic; struct net_device *dev = (struct net_device *) nic->dev; - int get_block, get_offset, put_block, put_offset, ring_bufs; + int get_block, put_block, put_offset; rx_curr_get_info_t get_info, put_info; RxD_t *rxdp; struct sk_buff *skb; @@ -2532,21 +2562,22 @@ static void rx_intr_handler(ring_info_t *ring_data) get_block = get_info.block_index; put_info = ring_data->rx_curr_put_info; put_block = put_info.block_index; - ring_bufs = get_info.ring_len+1; - rxdp = ring_data->rx_blocks[get_block].block_virt_addr + - get_info.offset; - get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) + - get_info.offset; + rxdp = ring_data->rx_blocks[get_block].rxds[get_info.offset].virt_addr; #ifndef CONFIG_S2IO_NAPI spin_lock(&nic->put_lock); put_offset = ring_data->put_pos; spin_unlock(&nic->put_lock); #else - put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) + + put_offset = (put_block * (rxd_count[nic->rxd_mode] + 1)) + put_info.offset; #endif - while (RXD_IS_UP2DT(rxdp) && - (((get_offset + 1) % ring_bufs) != put_offset)) { + while (RXD_IS_UP2DT(rxdp)) { + /* If your are next to put index then it's FIFO full condition */ + if ((get_block == put_block) && + (get_info.offset + 1) == put_info.offset) { + DBG_PRINT(ERR_DBG, "%s: Ring Full\n",dev->name); + break; + } skb = (struct sk_buff *) ((unsigned long)rxdp->Host_Control); if (skb == NULL) { DBG_PRINT(ERR_DBG, "%s: The skb is ", @@ -2555,46 +2586,52 @@ static void rx_intr_handler(ring_info_t *ring_data) spin_unlock(&nic->rx_lock); return; } -#ifndef CONFIG_2BUFF_MODE - pci_unmap_single(nic->pdev, (dma_addr_t) - rxdp->Buffer0_ptr, + if (nic->rxd_mode == RXD_MODE_1) { + pci_unmap_single(nic->pdev, (dma_addr_t) + ((RxD1_t*)rxdp)->Buffer0_ptr, dev->mtu + HEADER_ETHERNET_II_802_3_SIZE + HEADER_802_2_SIZE + HEADER_SNAP_SIZE, PCI_DMA_FROMDEVICE); -#else - pci_unmap_single(nic->pdev, (dma_addr_t) - rxdp->Buffer0_ptr, + } else if (nic->rxd_mode == RXD_MODE_3B) { + pci_unmap_single(nic->pdev, (dma_addr_t) + ((RxD3_t*)rxdp)->Buffer0_ptr, BUF0_LEN, PCI_DMA_FROMDEVICE); - pci_unmap_single(nic->pdev, (dma_addr_t) - rxdp->Buffer1_ptr, + pci_unmap_single(nic->pdev, (dma_addr_t) + ((RxD3_t*)rxdp)->Buffer1_ptr, BUF1_LEN, PCI_DMA_FROMDEVICE); - pci_unmap_single(nic->pdev, (dma_addr_t) - rxdp->Buffer2_ptr, - dev->mtu + BUF0_LEN + 4, + pci_unmap_single(nic->pdev, (dma_addr_t) + ((RxD3_t*)rxdp)->Buffer2_ptr, + dev->mtu + 4, PCI_DMA_FROMDEVICE); -#endif + } else { + pci_unmap_single(nic->pdev, (dma_addr_t) + ((RxD3_t*)rxdp)->Buffer0_ptr, BUF0_LEN, + PCI_DMA_FROMDEVICE); + pci_unmap_single(nic->pdev, (dma_addr_t) + ((RxD3_t*)rxdp)->Buffer1_ptr, + l3l4hdr_size + 4, + PCI_DMA_FROMDEVICE); + pci_unmap_single(nic->pdev, (dma_addr_t) + ((RxD3_t*)rxdp)->Buffer2_ptr, + dev->mtu, PCI_DMA_FROMDEVICE); + } rx_osm_handler(ring_data, rxdp); get_info.offset++; - ring_data->rx_curr_get_info.offset = - get_info.offset; - rxdp = ring_data->rx_blocks[get_block].block_virt_addr + - get_info.offset; - if (get_info.offset && - (!(get_info.offset % MAX_RXDS_PER_BLOCK))) { + ring_data->rx_curr_get_info.offset = get_info.offset; + rxdp = ring_data->rx_blocks[get_block]. + rxds[get_info.offset].virt_addr; + if (get_info.offset == rxd_count[nic->rxd_mode]) { get_info.offset = 0; - ring_data->rx_curr_get_info.offset - = get_info.offset; + ring_data->rx_curr_get_info.offset = get_info.offset; get_block++; - get_block %= ring_data->block_count; - ring_data->rx_curr_get_info.block_index - = get_block; + if (get_block == ring_data->block_count) + get_block = 0; + ring_data->rx_curr_get_info.block_index = get_block; rxdp = ring_data->rx_blocks[get_block].block_virt_addr; } - get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) + - get_info.offset; #ifdef CONFIG_S2IO_NAPI nic->pkts_to_process -= 1; if (!nic->pkts_to_process) @@ -3044,7 +3081,7 @@ int s2io_set_swapper(nic_t * sp) int wait_for_msix_trans(nic_t *nic, int i) { - XENA_dev_config_t __iomem *bar0 = nic->bar0; + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; u64 val64; int ret = 0, cnt = 0; @@ -3065,7 +3102,7 @@ int wait_for_msix_trans(nic_t *nic, int i) void restore_xmsi_data(nic_t *nic) { - XENA_dev_config_t __iomem *bar0 = nic->bar0; + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; u64 val64; int i; @@ -3083,7 +3120,7 @@ void restore_xmsi_data(nic_t *nic) void store_xmsi_data(nic_t *nic) { - XENA_dev_config_t __iomem *bar0 = nic->bar0; + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; u64 val64, addr, data; int i; @@ -3106,7 +3143,7 @@ void store_xmsi_data(nic_t *nic) int s2io_enable_msi(nic_t *nic) { - XENA_dev_config_t __iomem *bar0 = nic->bar0; + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; u16 msi_ctrl, msg_val; struct config_param *config = &nic->config; struct net_device *dev = nic->dev; @@ -3156,7 +3193,7 @@ int s2io_enable_msi(nic_t *nic) int s2io_enable_msi_x(nic_t *nic) { - XENA_dev_config_t __iomem *bar0 = nic->bar0; + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; u64 tx_mat, rx_mat; u16 msi_control; /* Temp variable */ int ret, i, j, msix_indx = 1; @@ -5537,16 +5574,7 @@ static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp) ((unsigned long) rxdp->Host_Control); int ring_no = ring_data->ring_no; u16 l3_csum, l4_csum; -#ifdef CONFIG_2BUFF_MODE - int buf0_len = RXD_GET_BUFFER0_SIZE(rxdp->Control_2); - int buf2_len = RXD_GET_BUFFER2_SIZE(rxdp->Control_2); - int get_block = ring_data->rx_curr_get_info.block_index; - int get_off = ring_data->rx_curr_get_info.offset; - buffAdd_t *ba = &ring_data->ba[get_block][get_off]; - unsigned char *buff; -#else - u16 len = (u16) ((RXD_GET_BUFFER0_SIZE(rxdp->Control_2)) >> 48);; -#endif + skb->dev = dev; if (rxdp->Control_1 & RXD_T_CODE) { unsigned long long err = rxdp->Control_1 & RXD_T_CODE; @@ -5563,19 +5591,36 @@ static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp) rxdp->Host_Control = 0; sp->rx_pkt_count++; sp->stats.rx_packets++; -#ifndef CONFIG_2BUFF_MODE - sp->stats.rx_bytes += len; -#else - sp->stats.rx_bytes += buf0_len + buf2_len; -#endif + if (sp->rxd_mode == RXD_MODE_1) { + int len = RXD_GET_BUFFER0_SIZE_1(rxdp->Control_2); -#ifndef CONFIG_2BUFF_MODE - skb_put(skb, len); -#else - buff = skb_push(skb, buf0_len); - memcpy(buff, ba->ba_0, buf0_len); - skb_put(skb, buf2_len); -#endif + sp->stats.rx_bytes += len; + skb_put(skb, len); + + } else if (sp->rxd_mode >= RXD_MODE_3A) { + int get_block = ring_data->rx_curr_get_info.block_index; + int get_off = ring_data->rx_curr_get_info.offset; + int buf0_len = RXD_GET_BUFFER0_SIZE_3(rxdp->Control_2); + int buf2_len = RXD_GET_BUFFER2_SIZE_3(rxdp->Control_2); + unsigned char *buff = skb_push(skb, buf0_len); + + buffAdd_t *ba = &ring_data->ba[get_block][get_off]; + sp->stats.rx_bytes += buf0_len + buf2_len; + memcpy(buff, ba->ba_0, buf0_len); + + if (sp->rxd_mode == RXD_MODE_3A) { + int buf1_len = RXD_GET_BUFFER1_SIZE_3(rxdp->Control_2); + + skb_put(skb, buf1_len); + skb->len += buf2_len; + skb->data_len += buf2_len; + skb->truesize += buf2_len; + skb_put(skb_shinfo(skb)->frag_list, buf2_len); + sp->stats.rx_bytes += buf1_len; + + } else + skb_put(skb, buf2_len); + } if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) && (sp->rx_csum)) { @@ -5711,6 +5756,7 @@ MODULE_VERSION(DRV_VERSION); module_param(tx_fifo_num, int, 0); module_param(rx_ring_num, int, 0); +module_param(rx_ring_mode, int, 0); module_param_array(tx_fifo_len, uint, NULL, 0); module_param_array(rx_ring_sz, uint, NULL, 0); module_param_array(rts_frm_len, uint, NULL, 0); @@ -5722,6 +5768,7 @@ module_param(shared_splits, int, 0); module_param(tmac_util_period, int, 0); module_param(rmac_util_period, int, 0); module_param(bimodal, bool, 0); +module_param(l3l4hdr_size, int , 0); #ifndef CONFIG_S2IO_NAPI module_param(indicate_max_pkts, int, 0); #endif @@ -5843,6 +5890,13 @@ Defaulting to INTA\n"); sp->pdev = pdev; sp->high_dma_flag = dma_flag; sp->device_enabled_once = FALSE; + if (rx_ring_mode == 1) + sp->rxd_mode = RXD_MODE_1; + if (rx_ring_mode == 2) + sp->rxd_mode = RXD_MODE_3B; + if (rx_ring_mode == 3) + sp->rxd_mode = RXD_MODE_3A; + sp->intr_type = dev_intr_type; if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) || @@ -5895,7 +5949,7 @@ Defaulting to INTA\n"); config->rx_ring_num = rx_ring_num; for (i = 0; i < MAX_RX_RINGS; i++) { config->rx_cfg[i].num_rxd = rx_ring_sz[i] * - (MAX_RXDS_PER_BLOCK + 1); + (rxd_count[sp->rxd_mode] + 1); config->rx_cfg[i].ring_priority = i; } @@ -6090,9 +6144,6 @@ Defaulting to INTA\n"); DBG_PRINT(ERR_DBG, "(rev %d), Version %s", get_xena_rev_id(sp->pdev), s2io_driver_version); -#ifdef CONFIG_2BUFF_MODE - DBG_PRINT(ERR_DBG, ", Buffer mode %d",2); -#endif switch(sp->intr_type) { case INTA: DBG_PRINT(ERR_DBG, ", Intr type INTA"); @@ -6125,9 +6176,6 @@ Defaulting to INTA\n"); DBG_PRINT(ERR_DBG, "(rev %d), Version %s", get_xena_rev_id(sp->pdev), s2io_driver_version); -#ifdef CONFIG_2BUFF_MODE - DBG_PRINT(ERR_DBG, ", Buffer mode %d",2); -#endif switch(sp->intr_type) { case INTA: DBG_PRINT(ERR_DBG, ", Intr type INTA"); @@ -6148,6 +6196,12 @@ Defaulting to INTA\n"); sp->def_mac_addr[0].mac_addr[4], sp->def_mac_addr[0].mac_addr[5]); } + if (sp->rxd_mode == RXD_MODE_3B) + DBG_PRINT(ERR_DBG, "%s: 2-Buffer mode support has been " + "enabled\n",dev->name); + if (sp->rxd_mode == RXD_MODE_3A) + DBG_PRINT(ERR_DBG, "%s: 3-Buffer mode support has been " + "enabled\n",dev->name); /* Initialize device name */ strcpy(sp->name, dev->name); diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 1cc24b56760e..419aad7f10e7 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -418,7 +418,7 @@ typedef struct list_info_hold { void *list_virt_addr; } list_info_hold_t; -/* Rx descriptor structure */ +/* Rx descriptor structure for 1 buffer mode */ typedef struct _RxD_t { u64 Host_Control; /* reserved for host */ u64 Control_1; @@ -439,49 +439,54 @@ typedef struct _RxD_t { #define SET_RXD_MARKER vBIT(THE_RXD_MARK, 0, 2) #define GET_RXD_MARKER(ctrl) ((ctrl & SET_RXD_MARKER) >> 62) -#ifndef CONFIG_2BUFF_MODE -#define MASK_BUFFER0_SIZE vBIT(0x3FFF,2,14) -#define SET_BUFFER0_SIZE(val) vBIT(val,2,14) -#else -#define MASK_BUFFER0_SIZE vBIT(0xFF,2,14) -#define MASK_BUFFER1_SIZE vBIT(0xFFFF,16,16) -#define MASK_BUFFER2_SIZE vBIT(0xFFFF,32,16) -#define SET_BUFFER0_SIZE(val) vBIT(val,8,8) -#define SET_BUFFER1_SIZE(val) vBIT(val,16,16) -#define SET_BUFFER2_SIZE(val) vBIT(val,32,16) -#endif - #define MASK_VLAN_TAG vBIT(0xFFFF,48,16) #define SET_VLAN_TAG(val) vBIT(val,48,16) #define SET_NUM_TAG(val) vBIT(val,16,32) -#ifndef CONFIG_2BUFF_MODE -#define RXD_GET_BUFFER0_SIZE(Control_2) (u64)((Control_2 & vBIT(0x3FFF,2,14))) -#else -#define RXD_GET_BUFFER0_SIZE(Control_2) (u8)((Control_2 & MASK_BUFFER0_SIZE) \ - >> 48) -#define RXD_GET_BUFFER1_SIZE(Control_2) (u16)((Control_2 & MASK_BUFFER1_SIZE) \ - >> 32) -#define RXD_GET_BUFFER2_SIZE(Control_2) (u16)((Control_2 & MASK_BUFFER2_SIZE) \ - >> 16) + +} RxD_t; +/* Rx descriptor structure for 1 buffer mode */ +typedef struct _RxD1_t { + struct _RxD_t h; + +#define MASK_BUFFER0_SIZE_1 vBIT(0x3FFF,2,14) +#define SET_BUFFER0_SIZE_1(val) vBIT(val,2,14) +#define RXD_GET_BUFFER0_SIZE_1(_Control_2) \ + (u16)((_Control_2 & MASK_BUFFER0_SIZE_1) >> 48) + u64 Buffer0_ptr; +} RxD1_t; +/* Rx descriptor structure for 3 or 2 buffer mode */ + +typedef struct _RxD3_t { + struct _RxD_t h; + +#define MASK_BUFFER0_SIZE_3 vBIT(0xFF,2,14) +#define MASK_BUFFER1_SIZE_3 vBIT(0xFFFF,16,16) +#define MASK_BUFFER2_SIZE_3 vBIT(0xFFFF,32,16) +#define SET_BUFFER0_SIZE_3(val) vBIT(val,8,8) +#define SET_BUFFER1_SIZE_3(val) vBIT(val,16,16) +#define SET_BUFFER2_SIZE_3(val) vBIT(val,32,16) +#define RXD_GET_BUFFER0_SIZE_3(Control_2) \ + (u8)((Control_2 & MASK_BUFFER0_SIZE_3) >> 48) +#define RXD_GET_BUFFER1_SIZE_3(Control_2) \ + (u16)((Control_2 & MASK_BUFFER1_SIZE_3) >> 32) +#define RXD_GET_BUFFER2_SIZE_3(Control_2) \ + (u16)((Control_2 & MASK_BUFFER2_SIZE_3) >> 16) #define BUF0_LEN 40 #define BUF1_LEN 1 -#endif u64 Buffer0_ptr; -#ifdef CONFIG_2BUFF_MODE u64 Buffer1_ptr; u64 Buffer2_ptr; -#endif -} RxD_t; +} RxD3_t; + /* Structure that represents the Rx descriptor block which contains * 128 Rx descriptors. */ -#ifndef CONFIG_2BUFF_MODE typedef struct _RxD_block { -#define MAX_RXDS_PER_BLOCK 127 - RxD_t rxd[MAX_RXDS_PER_BLOCK]; +#define MAX_RXDS_PER_BLOCK_1 127 + RxD1_t rxd[MAX_RXDS_PER_BLOCK_1]; u64 reserved_0; #define END_OF_BLOCK 0xFEFFFFFFFFFFFFFFULL @@ -492,18 +497,13 @@ typedef struct _RxD_block { * the upper 32 bits should * be 0 */ } RxD_block_t; -#else -typedef struct _RxD_block { -#define MAX_RXDS_PER_BLOCK 85 - RxD_t rxd[MAX_RXDS_PER_BLOCK]; -#define END_OF_BLOCK 0xFEFFFFFFFFFFFFFFULL - u64 reserved_1; /* 0xFEFFFFFFFFFFFFFF to mark last Rxd - * in this blk */ - u64 pNext_RxD_Blk_physical; /* Phy ponter to next blk. */ -} RxD_block_t; #define SIZE_OF_BLOCK 4096 +#define RXD_MODE_1 0 +#define RXD_MODE_3A 1 +#define RXD_MODE_3B 2 + /* Structure to hold virtual addresses of Buf0 and Buf1 in * 2buf mode. */ typedef struct bufAdd { @@ -512,7 +512,6 @@ typedef struct bufAdd { void *ba_0; void *ba_1; } buffAdd_t; -#endif /* Structure which stores all the MAC control parameters */ @@ -539,10 +538,17 @@ typedef struct { typedef tx_curr_get_info_t tx_curr_put_info_t; + +typedef struct rxd_info { + void *virt_addr; + dma_addr_t dma_addr; +}rxd_info_t; + /* Structure that holds the Phy and virt addresses of the Blocks */ typedef struct rx_block_info { - RxD_t *block_virt_addr; + void *block_virt_addr; dma_addr_t block_dma_addr; + rxd_info_t *rxds; } rx_block_info_t; /* pre declaration of the nic structure */ @@ -578,10 +584,8 @@ typedef struct ring_info { int put_pos; #endif -#ifdef CONFIG_2BUFF_MODE /* Buffer Address store. */ buffAdd_t **ba; -#endif nic_t *nic; } ring_info_t; @@ -647,8 +651,6 @@ typedef struct { /* Default Tunable parameters of the NIC. */ #define DEFAULT_FIFO_LEN 4096 -#define SMALL_RXD_CNT 30 * (MAX_RXDS_PER_BLOCK+1) -#define LARGE_RXD_CNT 100 * (MAX_RXDS_PER_BLOCK+1) #define SMALL_BLK_CNT 30 #define LARGE_BLK_CNT 100 @@ -678,6 +680,7 @@ struct msix_info_st { /* Structure representing one instance of the NIC */ struct s2io_nic { + int rxd_mode; #ifdef CONFIG_S2IO_NAPI /* * Count of packets to be processed in a given iteration, it will be indicated diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 750c0167539c..849ac88bcccc 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -2040,7 +2040,7 @@ static int mpi_send_packet (struct net_device *dev) return 1; } -static void get_tx_error(struct airo_info *ai, u32 fid) +static void get_tx_error(struct airo_info *ai, s32 fid) { u16 status; diff --git a/include/linux/phy.h b/include/linux/phy.h index 72cb67b66e0c..92a9696fdebe 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -72,6 +72,9 @@ struct mii_bus { /* list of all PHYs on bus */ struct phy_device *phy_map[PHY_MAX_ADDR]; + /* Phy addresses to be ignored when probing */ + u32 phy_mask; + /* Pointer to an array of interrupts, each PHY's * interrupt at the index matching its address */ int *irq; |