Merge commit 'v2.6.28-rc2' into tracing/urgent

1 files changed, 602 insertions, 0 deletions

diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
new file mode 100644
index 000000000000..daf9dce39e52
--- /dev/null
+++ b/drivers/ide/alim15x3.c
@@ -0,0 +1,602 @@
+/*
+ *  Copyright (C) 1998-2000 Michel Aubry, Maintainer
+ *  Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer
+ *  Copyright (C) 1999-2000 CJ, cjtsai@ali.com.tw, Maintainer
+ *
+ *  Copyright (C) 1998-2000 Andre Hedrick (andre@linux-ide.org)
+ *  May be copied or modified under the terms of the GNU General Public License
+ *  Copyright (C) 2002 Alan Cox <alan@redhat.com>
+ *  ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw>
+ *  Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
+ *  Copyright (C) 2007 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
+ *
+ *  (U)DMA capable version of ali 1533/1543(C), 1535(D)
+ *
+ **********************************************************************
+ *  9/7/99 --Parts from the above author are included and need to be
+ *  converted into standard interface, once I finish the thought.
+ *
+ *  Recent changes
+ *	Don't use LBA48 mode on ALi <= 0xC4
+ *	Don't poke 0x79 with a non ALi northbridge
+ *	Don't flip undefined bits on newer chipsets (fix Fujitsu laptop hang)
+ *	Allow UDMA6 on revisions > 0xC4
+ *
+ *  Documentation
+ *	Chipset documentation available under NDA only
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+#include <linux/dmi.h>
+
+#include <asm/io.h>
+
+#define DRV_NAME "alim15x3"
+
+/*
+ * Allow UDMA on M1543C-E chipset for WDC disks that ignore CRC checking
+ * (this is DANGEROUS and could result in data corruption).
+ */
+static int wdc_udma;
+
+module_param(wdc_udma, bool, 0);
+MODULE_PARM_DESC(wdc_udma,
+		 "allow UDMA on M1543C-E chipset for WDC disks (DANGEROUS)");
+
+/*
+ *	ALi devices are not plug in. Otherwise these static values would
+ *	need to go. They ought to go away anyway
+ */
+ 
+static u8 m5229_revision;
+static u8 chip_is_1543c_e;
+static struct pci_dev *isa_dev;
+
+/**
+ *	ali_set_pio_mode	-	set host controller for PIO mode
+ *	@drive: drive
+ *	@pio: PIO mode number
+ *
+ *	Program the controller for the given PIO mode.
+ */
+
+static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
+	struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
+	int s_time = t->setup, a_time = t->active, c_time = t->cycle;
+	u8 s_clc, a_clc, r_clc;
+	unsigned long flags;
+	int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
+	int port = hwif->channel ? 0x5c : 0x58;
+	int portFIFO = hwif->channel ? 0x55 : 0x54;
+	u8 cd_dma_fifo = 0, unit = drive->dn & 1;
+
+	if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8)
+		s_clc = 0;
+	if ((a_clc = (a_time * bus_speed + 999) / 1000) >= 8)
+		a_clc = 0;
+
+	if (!(r_clc = (c_time * bus_speed + 999) / 1000 - a_clc - s_clc)) {
+		r_clc = 1;
+	} else {
+		if (r_clc >= 16)
+			r_clc = 0;
+	}
+	local_irq_save(flags);
+	
+	/* 
+	 * PIO mode => ATA FIFO on, ATAPI FIFO off
+	 */
+	pci_read_config_byte(dev, portFIFO, &cd_dma_fifo);
+	if (drive->media==ide_disk) {
+		if (unit) {
+			pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0x0F) | 0x50);
+		} else {
+			pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0xF0) | 0x05);
+		}
+	} else {
+		if (unit) {
+			pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0x0F);
+		} else {
+			pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0xF0);
+		}
+	}
+	
+	pci_write_config_byte(dev, port, s_clc);
+	pci_write_config_byte(dev, port + unit + 2, (a_clc << 4) | r_clc);
+	local_irq_restore(flags);
+}
+
+/**
+ *	ali_udma_filter		-	compute UDMA mask
+ *	@drive: IDE device
+ *
+ *	Return available UDMA modes.
+ *
+ *	The actual rules for the ALi are:
+ *		No UDMA on revisions <= 0x20
+ *		Disk only for revisions < 0xC2
+ *		Not WDC drives on M1543C-E (?)
+ */
+
+static u8 ali_udma_filter(ide_drive_t *drive)
+{
+	if (m5229_revision > 0x20 && m5229_revision < 0xC2) {
+		if (drive->media != ide_disk)
+			return 0;
+		if (wdc_udma == 0 && chip_is_1543c_e &&
+		    strstr((char *)&drive->id[ATA_ID_PROD], "WDC "))
+			return 0;
+	}
+
+	return drive->hwif->ultra_mask;
+}
+
+/**
+ *	ali_set_dma_mode	-	set host controller for DMA mode
+ *	@drive: drive
+ *	@speed: DMA mode
+ *
+ *	Configure the hardware for the desired IDE transfer mode.
+ */
+
+static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed)
+{
+	ide_hwif_t *hwif	= HWIF(drive);
+	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	u8 speed1		= speed;
+	u8 unit			= drive->dn & 1;
+	u8 tmpbyte		= 0x00;
+	int m5229_udma		= (hwif->channel) ? 0x57 : 0x56;
+
+	if (speed == XFER_UDMA_6)
+		speed1 = 0x47;
+
+	if (speed < XFER_UDMA_0) {
+		u8 ultra_enable	= (unit) ? 0x7f : 0xf7;
+		/*
+		 * clear "ultra enable" bit
+		 */
+		pci_read_config_byte(dev, m5229_udma, &tmpbyte);
+		tmpbyte &= ultra_enable;
+		pci_write_config_byte(dev, m5229_udma, tmpbyte);
+
+		/*
+		 * FIXME: Oh, my... DMA timings are never set.
+		 */
+	} else {
+		pci_read_config_byte(dev, m5229_udma, &tmpbyte);
+		tmpbyte &= (0x0f << ((1-unit) << 2));
+		/*
+		 * enable ultra dma and set timing
+		 */
+		tmpbyte |= ((0x08 | ((4-speed1)&0x07)) << (unit << 2));
+		pci_write_config_byte(dev, m5229_udma, tmpbyte);
+		if (speed >= XFER_UDMA_3) {
+			pci_read_config_byte(dev, 0x4b, &tmpbyte);
+			tmpbyte |= 1;
+			pci_write_config_byte(dev, 0x4b, tmpbyte);
+		}
+	}
+}
+
+/**
+ *	ali15x3_dma_setup	-	begin a DMA phase
+ *	@drive:	target device
+ *
+ *	Returns 1 if the DMA cannot be performed, zero on success.
+ */
+
+static int ali15x3_dma_setup(ide_drive_t *drive)
+{
+	if (m5229_revision < 0xC2 && drive->media != ide_disk) {
+		if (rq_data_dir(drive->hwif->hwgroup->rq))
+			return 1;	/* try PIO instead of DMA */
+	}
+	return ide_dma_setup(drive);
+}
+
+/**
+ *	init_chipset_ali15x3	-	Initialise an ALi IDE controller
+ *	@dev: PCI device
+ *
+ *	This function initializes the ALI IDE controller and where 
+ *	appropriate also sets up the 1533 southbridge.
+ */
+
+static unsigned int init_chipset_ali15x3(struct pci_dev *dev)
+{
+	unsigned long flags;
+	u8 tmpbyte;
+	struct pci_dev *north = pci_get_slot(dev->bus, PCI_DEVFN(0,0));
+
+	m5229_revision = dev->revision;
+
+	isa_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
+
+	local_irq_save(flags);
+
+	if (m5229_revision < 0xC2) {
+		/*
+		 * revision 0x20 (1543-E, 1543-F)
+		 * revision 0xC0, 0xC1 (1543C-C, 1543C-D, 1543C-E)
+		 * clear CD-ROM DMA write bit, m5229, 0x4b, bit 7
+		 */
+		pci_read_config_byte(dev, 0x4b, &tmpbyte);
+		/*
+		 * clear bit 7
+		 */
+		pci_write_config_byte(dev, 0x4b, tmpbyte & 0x7F);
+		/*
+		 * check m1533, 0x5e, bit 1~4 == 1001 => & 00011110 = 00010010
+		 */
+		if (m5229_revision >= 0x20 && isa_dev) {
+			pci_read_config_byte(isa_dev, 0x5e, &tmpbyte);
+			chip_is_1543c_e = ((tmpbyte & 0x1e) == 0x12) ? 1: 0;
+		}
+		goto out;
+	}
+
+	/*
+	 * 1543C-B?, 1535, 1535D, 1553
+	 * Note 1: not all "motherboard" support this detection
+	 * Note 2: if no udma 66 device, the detection may "error".
+	 *         but in this case, we will not set the device to
+	 *         ultra 66, the detection result is not important
+	 */
+
+	/*
+	 * enable "Cable Detection", m5229, 0x4b, bit3
+	 */
+	pci_read_config_byte(dev, 0x4b, &tmpbyte);
+	pci_write_config_byte(dev, 0x4b, tmpbyte | 0x08);
+
+	/*
+	 * We should only tune the 1533 enable if we are using an ALi
+	 * North bridge. We might have no north found on some zany
+	 * box without a device at 0:0.0. The ALi bridge will be at
+	 * 0:0.0 so if we didn't find one we know what is cooking.
+	 */
+	if (north && north->vendor != PCI_VENDOR_ID_AL)
+		goto out;
+
+	if (m5229_revision < 0xC5 && isa_dev)
+	{	
+		/*
+		 * set south-bridge's enable bit, m1533, 0x79
+		 */
+
+		pci_read_config_byte(isa_dev, 0x79, &tmpbyte);
+		if (m5229_revision == 0xC2) {
+			/*
+			 * 1543C-B0 (m1533, 0x79, bit 2)
+			 */
+			pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x04);
+		} else if (m5229_revision >= 0xC3) {
+			/*
+			 * 1553/1535 (m1533, 0x79, bit 1)
+			 */
+			pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x02);
+		}
+	}
+
+out:
+	/*
+	 * CD_ROM DMA on (m5229, 0x53, bit0)
+	 *      Enable this bit even if we want to use PIO.
+	 * PIO FIFO off (m5229, 0x53, bit1)
+	 *      The hardware will use 0x54h and 0x55h to control PIO FIFO.
+	 *	(Not on later devices it seems)
+	 *
+	 *	0x53 changes meaning on later revs - we must no touch
+	 *	bit 1 on them.  Need to check if 0x20 is the right break.
+	 */
+	if (m5229_revision >= 0x20) {
+		pci_read_config_byte(dev, 0x53, &tmpbyte);
+
+		if (m5229_revision <= 0x20)
+			tmpbyte = (tmpbyte & (~0x02)) | 0x01;
+		else if (m5229_revision == 0xc7 || m5229_revision == 0xc8)
+			tmpbyte |= 0x03;
+		else
+			tmpbyte |= 0x01;
+
+		pci_write_config_byte(dev, 0x53, tmpbyte);
+	}
+	pci_dev_put(north);
+	pci_dev_put(isa_dev);
+	local_irq_restore(flags);
+	return 0;
+}
+
+/*
+ *	Cable special cases
+ */
+
+static const struct dmi_system_id cable_dmi_table[] = {
+	{
+		.ident = "HP Pavilion N5430",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"),
+		},
+	},
+	{
+		.ident = "Toshiba Satellite S1800-814",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "S1800-814"),
+		},
+	},
+	{ }
+};
+
+static int ali_cable_override(struct pci_dev *pdev)
+{
+	/* Fujitsu P2000 */
+	if (pdev->subsystem_vendor == 0x10CF &&
+	    pdev->subsystem_device == 0x10AF)
+		return 1;
+
+	/* Mitac 8317 (Winbook-A) and relatives */
+	if (pdev->subsystem_vendor == 0x1071 &&
+	    pdev->subsystem_device == 0x8317)
+		return 1;
+
+	/* Systems by DMI */
+	if (dmi_check_system(cable_dmi_table))
+		return 1;
+
+	return 0;
+}
+
+/**
+ *	ali_cable_detect	-	cable detection
+ *	@hwif: IDE interface
+ *
+ *	This checks if the controller and the cable are capable
+ *	of UDMA66 transfers. It doesn't check the drives.
+ *	But see note 2 below!
+ *
+ *	FIXME: frobs bits that are not defined on newer ALi devicea
+ */
+
+static u8 ali_cable_detect(ide_hwif_t *hwif)
+{
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
+	unsigned long flags;
+	u8 cbl = ATA_CBL_PATA40, tmpbyte;
+
+	local_irq_save(flags);
+
+	if (m5229_revision >= 0xC2) {
+		/*
+		 * m5229 80-pin cable detection (from Host View)
+		 *
+		 * 0x4a bit0 is 0 => primary channel has 80-pin
+		 * 0x4a bit1 is 0 => secondary channel has 80-pin
+		 *
+		 * Certain laptops use short but suitable cables
+		 * and don't implement the detect logic.
+		 */
+		if (ali_cable_override(dev))
+			cbl = ATA_CBL_PATA40_SHORT;
+		else {
+			pci_read_config_byte(dev, 0x4a, &tmpbyte);
+			if ((tmpbyte & (1 << hwif->channel)) == 0)
+				cbl = ATA_CBL_PATA80;
+		}
+	}
+
+	local_irq_restore(flags);
+
+	return cbl;
+}
+
+#if !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC)
+/**
+ *	init_hwif_ali15x3	-	Initialize the ALI IDE x86 stuff
+ *	@hwif: interface to configure
+ *
+ *	Obtain the IRQ tables for an ALi based IDE solution on the PC
+ *	class platforms. This part of the code isn't applicable to the
+ *	Sparc and PowerPC systems.
+ */
+
+static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif)
+{
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
+	u8 ideic, inmir;
+	s8 irq_routing_table[] = { -1,  9, 3, 10, 4,  5, 7,  6,
+				      1, 11, 0, 12, 0, 14, 0, 15 };
+	int irq = -1;
+
+	if (dev->device == PCI_DEVICE_ID_AL_M5229)
+		hwif->irq = hwif->channel ? 15 : 14;
+
+	if (isa_dev) {
+		/*
+		 * read IDE interface control
+		 */
+		pci_read_config_byte(isa_dev, 0x58, &ideic);
+
+		/* bit0, bit1 */
+		ideic = ideic & 0x03;
+
+		/* get IRQ for IDE Controller */
+		if ((hwif->channel && ideic == 0x03) ||
+		    (!hwif->channel && !ideic)) {
+			/*
+			 * get SIRQ1 routing table
+			 */
+			pci_read_config_byte(isa_dev, 0x44, &inmir);
+			inmir = inmir & 0x0f;
+			irq = irq_routing_table[inmir];
+		} else if (hwif->channel && !(ideic & 0x01)) {
+			/*
+			 * get SIRQ2 routing table
+			 */
+			pci_read_config_byte(isa_dev, 0x75, &inmir);
+			inmir = inmir & 0x0f;
+			irq = irq_routing_table[inmir];
+		}
+		if(irq >= 0)
+			hwif->irq = irq;
+	}
+}
+#else
+#define init_hwif_ali15x3 NULL
+#endif /* !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) */
+
+/**
+ *	init_dma_ali15x3	-	set up DMA on ALi15x3
+ *	@hwif: IDE interface
+ *	@d: IDE port info
+ *
+ *	Set up the DMA functionality on the ALi 15x3.
+ */
+
+static int __devinit init_dma_ali15x3(ide_hwif_t *hwif,
+				      const struct ide_port_info *d)
+{
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
+	unsigned long base = ide_pci_dma_base(hwif, d);
+
+	if (base == 0)
+		return -1;
+
+	hwif->dma_base = base;
+
+	if (ide_pci_check_simplex(hwif, d) < 0)
+		return -1;
+
+	if (ide_pci_set_master(dev, d->name) < 0)
+		return -1;
+
+	if (!hwif->channel)
+		outb(inb(base + 2) & 0x60, base + 2);
+
+	printk(KERN_INFO "    %s: BM-DMA at 0x%04lx-0x%04lx\n",
+			 hwif->name, base, base + 7);
+
+	if (ide_allocate_dma_engine(hwif))
+		return -1;
+
+	hwif->dma_ops = &sff_dma_ops;
+
+	return 0;
+}
+
+static const struct ide_port_ops ali_port_ops = {
+	.set_pio_mode		= ali_set_pio_mode,
+	.set_dma_mode		= ali_set_dma_mode,
+	.udma_filter		= ali_udma_filter,
+	.cable_detect		= ali_cable_detect,
+};
+
+static const struct ide_dma_ops ali_dma_ops = {
+	.dma_host_set		= ide_dma_host_set,
+	.dma_setup		= ali15x3_dma_setup,
+	.dma_exec_cmd		= ide_dma_exec_cmd,
+	.dma_start		= ide_dma_start,
+	.dma_end		= ide_dma_end,
+	.dma_test_irq		= ide_dma_test_irq,
+	.dma_lost_irq		= ide_dma_lost_irq,
+	.dma_timeout		= ide_dma_timeout,
+};
+
+static const struct ide_port_info ali15x3_chipset __devinitdata = {
+	.name		= DRV_NAME,
+	.init_chipset	= init_chipset_ali15x3,
+	.init_hwif	= init_hwif_ali15x3,
+	.init_dma	= init_dma_ali15x3,
+	.port_ops	= &ali_port_ops,
+	.pio_mask	= ATA_PIO5,
+	.swdma_mask	= ATA_SWDMA2,
+	.mwdma_mask	= ATA_MWDMA2,
+};
+
+/**
+ *	alim15x3_init_one	-	set up an ALi15x3 IDE controller
+ *	@dev: PCI device to set up
+ *
+ *	Perform the actual set up for an ALi15x3 that has been found by the
+ *	hot plug layer.
+ */
+ 
+static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	struct ide_port_info d = ali15x3_chipset;
+	u8 rev = dev->revision, idx = id->driver_data;
+
+	/* don't use LBA48 DMA on ALi devices before rev 0xC5 */
+	if (rev <= 0xC4)
+		d.host_flags |= IDE_HFLAG_NO_LBA48_DMA;
+
+	if (rev >= 0x20) {
+		if (rev == 0x20)
+			d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
+
+		if (rev < 0xC2)
+			d.udma_mask = ATA_UDMA2;
+		else if (rev == 0xC2 || rev == 0xC3)
+			d.udma_mask = ATA_UDMA4;
+		else if (rev == 0xC4)
+			d.udma_mask = ATA_UDMA5;
+		else
+			d.udma_mask = ATA_UDMA6;
+
+		d.dma_ops = &ali_dma_ops;
+	} else {
+		d.host_flags |= IDE_HFLAG_NO_DMA;
+
+		d.mwdma_mask = d.swdma_mask = 0;
+	}
+
+	if (idx == 0)
+		d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
+
+	return ide_pci_init_one(dev, &d, NULL);
+}
+
+
+static const struct pci_device_id alim15x3_pci_tbl[] = {
+	{ PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5229), 0 },
+	{ PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), 1 },
+	{ 0, },
+};
+MODULE_DEVICE_TABLE(pci, alim15x3_pci_tbl);
+
+static struct pci_driver alim15x3_pci_driver = {
+	.name		= "ALI15x3_IDE",
+	.id_table	= alim15x3_pci_tbl,
+	.probe		= alim15x3_init_one,
+	.remove		= ide_pci_remove,
+	.suspend	= ide_pci_suspend,
+	.resume		= ide_pci_resume,
+};
+
+static int __init ali15x3_ide_init(void)
+{
+	return ide_pci_register_driver(&alim15x3_pci_driver);
+}
+
+static void __exit ali15x3_ide_exit(void)
+{
+	return pci_unregister_driver(&alim15x3_pci_driver);
+}
+
+module_init(ali15x3_ide_init);
+module_exit(ali15x3_ide_exit);
+
+MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox");
+MODULE_DESCRIPTION("PCI driver module for ALi 15x3 IDE");
+MODULE_LICENSE("GPL");