Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver specific changes from Arnd Bergmann:
 "These changes are all driver specific and cross over between arm-soc
  contents and some other subsystem, in these cases cpufreq, crypto,
  dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have
  these changes merged through arm-soc.

  As we proceed to untangle the dependencies between platform code and
  driver code, the amount of changes in this category is fortunately
  shrinking, for 3.11 we have 16 branches here and 101 non-merge
  changesets, the majority of which are for the stedma40 dma engine
  driver used in the ux500 platform.  Cleaning up that code touches
  multiple subsystems, but gets rid of the dependency in the end.

  The mailbox code moved out from mach-omap2 to drivers/mailbox is an
  intermediate step and is still omap specific at the moment.  Patches
  exist to generalize the subsystem and add other drivers with the same
  API, but those did not make it for 3.11."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits)
  crypto: ux500: use dmaengine_submit API
  crypto: ux500: use dmaengine_prep_slave_sg API
  crypto: ux500: use dmaengine_device_control API
  crypto: ux500/crypt: add missing __iomem qualifiers
  crypto: ux500/hash: add missing static qualifiers
  crypto: ux500/hash: use readl on iomem addresses
  dmaengine: ste_dma40: Declare memcpy config as static
  ARM: ux500: Remove mop500_snowball_ethernet_clock_enable()
  ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO
  ARM: ux500: Provide a AB8500 GPIO Device Tree node
  gpio: rcar: fix gpio_rcar_of_table
  gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections
  gpio-rcar: Reference core gpio documentation in the DT bindings
  clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2
  ARM: dts: Update Samsung I2S documentation
  ARM: dts: add clock provider information for i2s controllers in Exynos5250
  ARM: dts: add Exynos audio subsystem clock controller node
  clk: samsung: register audio subsystem clocks using common clock framework
  ARM: dts: use #include for all device trees for Samsung
  pinctrl: s3c24xx: use correct header for chained_irq functions
  ...

3 files changed, 137 insertions, 2 deletions

diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index b7c232e67425..187681013bdb 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_COMMON_CLK)	+= clk.o clk-pll.o
 obj-$(CONFIG_ARCH_EXYNOS4)	+= clk-exynos4.o
 obj-$(CONFIG_SOC_EXYNOS5250)	+= clk-exynos5250.o
 obj-$(CONFIG_SOC_EXYNOS5440)	+= clk-exynos5440.o
+obj-$(CONFIG_ARCH_EXYNOS)	+= clk-exynos-audss.o
diff --git a/drivers/clk/samsung/clk-exynos-audss.c b/drivers/clk/samsung/clk-exynos-audss.c
new file mode 100644
index 000000000000..9b1bbd52fd1f
--- /dev/null
+++ b/drivers/clk/samsung/clk-exynos-audss.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Author: Padmavathi Venna <padma.v@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Audio Subsystem Clock Controller.
+*/
+
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clk/exynos-audss-clk.h>
+
+static DEFINE_SPINLOCK(lock);
+static struct clk **clk_table;
+static void __iomem *reg_base;
+static struct clk_onecell_data clk_data;
+
+#define ASS_CLK_SRC 0x0
+#define ASS_CLK_DIV 0x4
+#define ASS_CLK_GATE 0x8
+
+static unsigned long reg_save[][2] = {
+	{ASS_CLK_SRC,  0},
+	{ASS_CLK_DIV,  0},
+	{ASS_CLK_GATE, 0},
+};
+
+/* list of all parent clock list */
+static const char *mout_audss_p[] = { "fin_pll", "fout_epll" };
+static const char *mout_i2s_p[] = { "mout_audss", "cdclk0", "sclk_audio0" };
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos_audss_clk_suspend(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(reg_save); i++)
+		reg_save[i][1] = readl(reg_base + reg_save[i][0]);
+
+	return 0;
+}
+
+static void exynos_audss_clk_resume(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(reg_save); i++)
+		writel(reg_save[i][1], reg_base + reg_save[i][0]);
+}
+
+static struct syscore_ops exynos_audss_clk_syscore_ops = {
+	.suspend	= exynos_audss_clk_suspend,
+	.resume		= exynos_audss_clk_resume,
+};
+#endif /* CONFIG_PM_SLEEP */
+
+/* register exynos_audss clocks */
+void __init exynos_audss_clk_init(struct device_node *np)
+{
+	reg_base = of_iomap(np, 0);
+	if (!reg_base) {
+		pr_err("%s: failed to map audss registers\n", __func__);
+		return;
+	}
+
+	clk_table = kzalloc(sizeof(struct clk *) * EXYNOS_AUDSS_MAX_CLKS,
+				GFP_KERNEL);
+	if (!clk_table) {
+		pr_err("%s: could not allocate clk lookup table\n", __func__);
+		return;
+	}
+
+	clk_data.clks = clk_table;
+	clk_data.clk_num = EXYNOS_AUDSS_MAX_CLKS;
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+	clk_table[EXYNOS_MOUT_AUDSS] = clk_register_mux(NULL, "mout_audss",
+				mout_audss_p, ARRAY_SIZE(mout_audss_p), 0,
+				reg_base + ASS_CLK_SRC, 0, 1, 0, &lock);
+
+	clk_table[EXYNOS_MOUT_I2S] = clk_register_mux(NULL, "mout_i2s",
+				mout_i2s_p, ARRAY_SIZE(mout_i2s_p), 0,
+				reg_base + ASS_CLK_SRC, 2, 2, 0, &lock);
+
+	clk_table[EXYNOS_DOUT_SRP] = clk_register_divider(NULL, "dout_srp",
+				"mout_audss", 0, reg_base + ASS_CLK_DIV, 0, 4,
+				0, &lock);
+
+	clk_table[EXYNOS_DOUT_AUD_BUS] = clk_register_divider(NULL,
+				"dout_aud_bus", "dout_srp", 0,
+				reg_base + ASS_CLK_DIV, 4, 4, 0, &lock);
+
+	clk_table[EXYNOS_DOUT_I2S] = clk_register_divider(NULL, "dout_i2s",
+				"mout_i2s", 0, reg_base + ASS_CLK_DIV, 8, 4, 0,
+				&lock);
+
+	clk_table[EXYNOS_SRP_CLK] = clk_register_gate(NULL, "srp_clk",
+				"dout_srp", CLK_SET_RATE_PARENT,
+				reg_base + ASS_CLK_GATE, 0, 0, &lock);
+
+	clk_table[EXYNOS_I2S_BUS] = clk_register_gate(NULL, "i2s_bus",
+				"dout_aud_bus", CLK_SET_RATE_PARENT,
+				reg_base + ASS_CLK_GATE, 2, 0, &lock);
+
+	clk_table[EXYNOS_SCLK_I2S] = clk_register_gate(NULL, "sclk_i2s",
+				"dout_i2s", CLK_SET_RATE_PARENT,
+				reg_base + ASS_CLK_GATE, 3, 0, &lock);
+
+	clk_table[EXYNOS_PCM_BUS] = clk_register_gate(NULL, "pcm_bus",
+				 "sclk_pcm", CLK_SET_RATE_PARENT,
+				reg_base + ASS_CLK_GATE, 4, 0, &lock);
+
+	clk_table[EXYNOS_SCLK_PCM] = clk_register_gate(NULL, "sclk_pcm",
+				"div_pcm0", CLK_SET_RATE_PARENT,
+				reg_base + ASS_CLK_GATE, 5, 0, &lock);
+
+#ifdef CONFIG_PM_SLEEP
+	register_syscore_ops(&exynos_audss_clk_syscore_ops);
+#endif
+
+	pr_info("Exynos: Audss: clock setup completed\n");
+}
+CLK_OF_DECLARE(exynos4210_audss_clk, "samsung,exynos4210-audss-clock",
+		exynos_audss_clk_init);
+CLK_OF_DECLARE(exynos5250_audss_clk, "samsung,exynos5250-audss-clock",
+		exynos_audss_clk_init);
diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
index 22d7699e7ced..6f767c515ec7 100644
--- a/drivers/clk/samsung/clk-exynos5250.c
+++ b/drivers/clk/samsung/clk-exynos5250.c
@@ -87,6 +87,7 @@ enum exynos5250_clks {
 	sclk_mmc0, sclk_mmc1, sclk_mmc2, sclk_mmc3, sclk_sata, sclk_usb3,
 	sclk_jpeg, sclk_uart0, sclk_uart1, sclk_uart2, sclk_uart3, sclk_pwm,
 	sclk_audio1, sclk_audio2, sclk_spdif, sclk_spi0, sclk_spi1, sclk_spi2,
+	div_i2s1, div_i2s2,
 
 	/* gate clocks */
 	gscl0 = 256, gscl1, gscl2, gscl3, gscl_wa, gscl_wb, smmu_gscl0,
@@ -291,8 +292,8 @@ struct samsung_div_clock exynos5250_div_clks[] __initdata = {
 	DIV(none, "div_pcm1", "sclk_audio1", DIV_PERIC4, 4, 8),
 	DIV(none, "div_audio2", "mout_audio2", DIV_PERIC4, 16, 4),
 	DIV(none, "div_pcm2", "sclk_audio2", DIV_PERIC4, 20, 8),
-	DIV(none, "div_i2s1", "sclk_audio1", DIV_PERIC5, 0, 6),
-	DIV(none, "div_i2s2", "sclk_audio2", DIV_PERIC5, 8, 6),
+	DIV(div_i2s1, "div_i2s1", "sclk_audio1", DIV_PERIC5, 0, 6),
+	DIV(div_i2s2, "div_i2s2", "sclk_audio2", DIV_PERIC5, 8, 6),
 	DIV(sclk_pixel, "div_hdmi_pixel", "sclk_vpll", DIV_DISP1_0, 28, 4),
 	DIV_A(none, "armclk", "div_arm", DIV_CPU0, 28, 3, "armclk"),
 	DIV_F(none, "div_mipi1_pre", "div_mipi1",