sh: Shuffle the board directories in to mach groups.

This flattens out the board directories in to individual mach groups,
we will use this for getting rid of unneeded directories, simplifying
the build system, and becoming more coherent with the refactored
arch/sh/include topology.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 95 insertions, 0 deletions

diff --git a/arch/sh/boards/mach-snapgear/setup.c b/arch/sh/boards/mach-snapgear/setup.c
new file mode 100644
index 000000000000..a5e349d3dda2
--- /dev/null
+++ b/arch/sh/boards/mach-snapgear/setup.c
@@ -0,0 +1,95 @@
+/*
+ * linux/arch/sh/boards/snapgear/setup.c
+ *
+ * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
+ * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
+ *
+ * Based on files with the following comments:
+ *
+ *           Copyright (C) 2000  Kazumoto Kojima
+ *
+ *           Modified for 7751 Solution Engine by
+ *           Ian da Silva and Jeremy Siegel, 2001.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <asm/machvec.h>
+#include <asm/snapgear.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <cpu/timer.h>
+
+/*
+ * EraseConfig handling functions
+ */
+
+static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
+{
+	(void)ctrl_inb(0xb8000000);	/* dummy read */
+
+	printk("SnapGear: erase switch interrupt!\n");
+
+	return IRQ_HANDLED;
+}
+
+static int __init eraseconfig_init(void)
+{
+	printk("SnapGear: EraseConfig init\n");
+	/* Setup "EraseConfig" switch on external IRQ 0 */
+	if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED,
+				"Erase Config", NULL))
+		printk("SnapGear: failed to register IRQ%d for Reset witch\n",
+				IRL0_IRQ);
+	else
+		printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
+				IRL0_IRQ);
+	return(0);
+}
+
+module_init(eraseconfig_init);
+
+/****************************************************************************/
+/*
+ * Initialize IRQ setting
+ *
+ * IRL0 = erase switch
+ * IRL1 = eth0
+ * IRL2 = eth1
+ * IRL3 = crypto
+ */
+
+static void __init init_snapgear_IRQ(void)
+{
+	printk("Setup SnapGear IRQ/IPR ...\n");
+	/* enable individual interrupt mode for externals */
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_snapgear __initmv = {
+	.mv_name		= "SnapGear SecureEdge5410",
+	.mv_nr_irqs		= 72,
+
+	.mv_inb			= snapgear_inb,
+	.mv_inw			= snapgear_inw,
+	.mv_inl			= snapgear_inl,
+	.mv_outb		= snapgear_outb,
+	.mv_outw		= snapgear_outw,
+	.mv_outl		= snapgear_outl,
+
+	.mv_inb_p		= snapgear_inb_p,
+	.mv_inw_p		= snapgear_inw,
+	.mv_inl_p		= snapgear_inl,
+	.mv_outb_p		= snapgear_outb_p,
+	.mv_outw_p		= snapgear_outw,
+	.mv_outl_p		= snapgear_outl,
+
+	.mv_init_irq		= init_snapgear_IRQ,
+};