Release 1.11.90

1 files changed, 809 insertions, 2 deletions

diff --git a/ChangeLog b/ChangeLog
index feb21f512..55eebdca2 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,9 +1,816 @@
+=== release 1.11.90 ===
+
+2017-04-07  Sebastian Dröge <slomo@coaxion.net>
+
+	* configure.ac:
+	  releasing 1.11.90
+
+2017-04-07 15:06:30 +0300  Sebastian Dröge <sebastian@centricular.com>
+
+	* po/el.po:
+	  po: Update translations
+
+2017-04-06 12:01:00 +0200  Edward Hervey <edward@centricular.com>
+
+	* gst/audioparsers/gstaacparse.c:
+	  aacparse: streamline and improve AudioSpecificConfig parsing
+	  AudioSpecifigConfig is used in a variety of AAC streams but was
+	  being parsed differently. Instead, make everyone use the same parsing.
+	  * Remove unused 'bits' field (it was always set to 0 if present)
+	  * Add proper GAConfig parsing (to know the  number of samples per frame
+	  if present).
+	  Fixes wrong rate/channels configuration in streams coming from qtdemux
+	  https://bugzilla.gnome.org/show_bug.cgi?id=780966
+
+2017-04-05 09:46:31 -0400  Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+	* sys/v4l2/gstv4l2videodec.c:
+	  v4l2videodec: Fix 32bit only printf format
+	  The previous patch was using %llu for 64bits printf, which is 32bit
+	  specific. We also trace the latency in time human readable form now.
+
+2016-03-16 16:22:48 +0100  Philipp Zabel <p.zabel@pengutronix.de>
+
+	* sys/v4l2/gstv4l2object.c:
+	  v4l2object: set streamparm for outputs that support it
+	  Without a specified framerate from the sink, the decoder frame interval
+	  should be set using the framerate of the encoded video stream.
+	  Therefore, the v4l2object should be able to change the framerate on the
+	  output if the V4L2 device accepts it.
+	  This is also necessary for mem2mem encoders so that their bitrate
+	  calculation code may work correctly and they may report the correct
+	  frame duration on the capture queue.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=779466
+
+2016-03-16 16:24:55 +0100  Philipp Zabel <p.zabel@pengutronix.de>
+
+	* sys/v4l2/gstv4l2videodec.c:
+	  v4l2videodec: only set latency if the frame duration is valid
+	  If the duration of the v4l2object is GST_CLOCK_TIME_NONE, because the
+	  sink did not specify a framerate in the caps and the driver accepts the
+	  framerate, the decoder element uses GST_CLOCK_TIME_NONE to calculate and
+	  set the element latency.
+	  While this is a bug of the capture driver, the decoder element should
+	  not use the invalid duration to calculate a latency, but print a warning
+	  instead.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=779466
+
+2016-11-23 12:17:55 -0500  Olivier Crête <olivier.crete@collabora.com>
+
+	* sys/v4l2/gstv4l2sink.c:
+	  v4l2sink: Block in preroll_wait on unlock
+	  The correct behaviour of anything stuck in the ->render() function
+	  between ->unlock() and ->unlock_stop() is to call
+	  gst_base_sink_wait_preroll() and only return an error if this returns an
+	  error, otherwise, it must continue where it left off!
+	  https://bugzilla.gnome.org/show_bug.cgi?id=774945
+
+2017-04-05 15:55:20 +1000  Jan Schmidt <jan@centricular.com>
+
+	* ext/vpx/gstvp9dec.c:
+	  vp9dec: Add warnings for unsupported frame formats
+	  At least output an element warning on the bus when we
+	  encounter a frame format GStreamer doesn't currently support.
+
+2017-04-04 17:55:13 +0200  Edward Hervey <edward@centricular.com>
+
+	* gst/audioparsers/gstaacparse.c:
+	  aacparse: Handle Parametric Stereo with HE-AAC(v2)
+	  According to ISO/IEC:14496-2:2009 , in the case of HE-AACv2 (audioObjecType
+	  29) parametric stereo is used (a single mono track is used and then
+	  transformations are applied to it to provide a stereo output).
+	  We therefore report two channels in the case where there is one reported
+	  in the audioChannelConfiguration.
+	  Fixes the various issues where a demuxer would report two channels, but
+	  then the parser would say there's only one channel, and then the decoder
+	  would output two channels.
+
+2017-04-04 15:22:25 +0300  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/isomp4/gstqtmux.c:
+	  qtmux: Simplify buffer refcounting in add_buffer() and remove unneeded NULL checks
+
+2017-04-04 15:08:33 +0300  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/isomp4/gstqtmux.c:
+	  qtmux: Select the best pad based on the cached last_buf if any
+	  last_buf is the one we're going to write next, not buf. As such we
+	  should check timestamps against that one if there is one to select the
+	  earliest pad.
+	  Also remember the currently selected pad in the very beginning when
+	  storing the first last_buf.
+	  This both solves some edge cases where not the correct next pad was
+	  selected corresponding to the target interleave.
+
+2017-04-04 15:07:40 +0300  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/isomp4/gstqtmux.c:
+	  qtmux: Error out immediately if a timecode is to be written but downstream return not-OK
+
+2017-04-03 11:34:49 +0200  Edward Hervey <edward@centricular.com>
+
+	* gst/isomp4/qtdemux.c:
+	  qtdemux: Update variables before early exit
+	  This is an update of d78d5896272d78df41e696fac929e7dfb3bb3dfa
+	  We still exit as early as possible in case of non-ok/non-unlinked combined
+	  flow, but we first make sure that we update the internal position variables.
+	  This ensures that if upstreams "ignores" the flow return (and carries on pushing),
+	  we don't end up processing data with completely bogus variables/positions.
+
+2017-03-24 00:11:13 +1300  Douglas Bagnall <douglas@halo.gen.nz>
+
+	* gst/interleave/interleave.c:
+	* gst/interleave/interleave.h:
+	  interleave: avoid using uninitialised ordering_map
+	  If self->channel_positions == NULL (which seems unlikely),
+	  self->default_channels_ordering_map will be used unintialised.
+	  We avoid that by keeping track of the channel_mask, which is set when
+	  the ordering map is initialised.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=780331
+
+2017-03-23 23:56:31 +1300  Douglas Bagnall <douglas@halo.gen.nz>
+
+	* gst/interleave/interleave.c:
+	  interleave: don't overflow channel map with >64 channels
+	  When there are more than 64 channels, we don't want to exceed the
+	  bounds of the ordering_map buffer, and in these cases we don't want to
+	  rempa at all. Here we avoid doing that.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=780331
+
+2017-03-28 14:23:16 -0300  Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+	* tests/check/meson.build:
+	  meson: Use get_pkgconfig_variable instead of calling pkg-config ourself
+	  It is avalaible in meson 0.36 which is now are requirement
+
+2017-03-28 14:22:41 -0300  Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+	* pkgconfig/gstreamer-plugins-good.pc.in:
+	* pkgconfig/meson.build:
+	  pkgconfig: Do not ever build an installed .pc file
+
+2017-03-28 11:15:53 -0300  Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+	* tests/check/meson.build:
+	  meson: test: Fix environment object usage
+
+2017-03-28 11:14:47 -0300  Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+	* meson.build:
+	* pkgconfig/gstreamer-plugins-good.pc.in:
+	* pkgconfig/meson.build:
+	  pkgconfig: Generate the pkg-config with meson too
+
+2017-03-27 21:52:00 +0300  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/isomp4/qtdemux.c:
+	  qtdemux: In gap mode, consider the mdat offset when calculating the remaining mdat size
+	  The mdat generally does not start at offset 0, we have to include the
+	  size of the moof and whatever else was in front of the mdat.
+
+2017-03-27 11:43:31 +0300  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/isomp4/atomsrecovery.c:
+	  atomsrecovery: Error out when fseek() fails instead of silently ignoring
+	  CID 1403262
+
+2017-03-23 22:13:05 +0100  Carlos Rafael Giani <dv@pseudoterminal.org>
+
+	* sys/v4l2/gstv4l2object.c:
+	  v4l2object: Also add videometa if there is padding to the right and bottom
+	  https://bugzilla.gnome.org/show_bug.cgi?id=780478
+
+2017-03-21 12:54:27 +0200  George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+	* gst/rtpmanager/gstrtpmux.c:
+	  rtpmux: fix output segment and buffer DTS to correspond to the flattened PTS
+	  https://bugzilla.gnome.org/show_bug.cgi?id=780347
+
+2017-03-23 17:53:19 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/isomp4/gstqtmux.c:
+	* gst/isomp4/gstqtmux.h:
+	  qtmux: Remove some unused variables
+
+2017-03-23 15:01:16 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/isomp4/gstqtmux.c:
+	  qtmux: Remove a couple of unneeded levels of indentation
+
+2017-03-22 18:18:40 +0000  Enrique Ocaña González <eocanha@igalia.com>
+
+	* gst/isomp4/qtdemux.c:
+	  qtdemux: distinguish TFDT with value 0 from no TFDT at all
+	  TFDTs with time 0 are being ignored since commit 1fc3d42f. They're
+	  mistaken with the case of not having TFDT, but those two cases
+	  must be distinguished in some way.
+	  This patch passes an extra boolean flag when the TFDT is present.
+	  This is now the condition being evaluated, instead of checking for
+	  0 time.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=780410
+
+2017-03-22 19:15:09 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/isomp4/gstqtmux.c:
+	  qtmux: Reset current chunk after writing out timecode
+	  If we have multiple tracks with timecodes, or it's not the first track
+	  that has timecodes, or not the first buffer, we already started a chunk
+	  for media data. We now need to "close" that chunk because we wrote data
+	  for the timecode track and a new chunk has to be started for the
+	  original track the next time it has data.
+
+2017-03-22 18:52:51 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/isomp4/gstqtmux.c:
+	* gst/isomp4/gstqtmux.h:
+	  qtmux: Do timecode handling per track, not per muxer instance
+	  There could be multiple video tracks with timecodes.
+
+2017-03-22 00:38:51 +1100  Jan Schmidt <jan@centricular.com>
+
+	* gst/isomp4/qtdemux.c:
+	* gst/matroska/matroska-demux.c:
+	  qtdemux: matroskademux: Ignore repeated seek events
+	  Similar to what was done in adaptivedemux, ignore seek
+	  events we've already handled - such as when they are received
+	  on every srcpad of files with lots of streams.
+
+2017-03-21 14:55:32 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/isomp4/qtdemux.c:
+	* gst/isomp4/qtdemux.h:
+	  dashdemux: Update mdatleft from overall mdatsize and offset when observing a gap
+	  Otherwise mdatleft will have a value calculated from the initial
+	  mdatsize minus the parts of the stream that we saw, which is not
+	  including all the parts of the stream that might've been skipped.
+
+2017-03-20 17:03:32 +0000  Tim-Philipp Müller <tim@centricular.com>
+
+	* ext/soup/gstsouphttpsrc.c:
+	* gst/audioparsers/gstmpegaudioparse.c:
+	  docs: update two references to the removed 'mad' plugin
+	  https://bugzilla.gnome.org/show_bug.cgi?id=776140
+
+2017-03-20 12:03:29 +0200  George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+	* gst/rtpmanager/gstrtprtxqueue.c:
+	  rtprtxqueue: add basic documentation and example pipelines
+	  Mostly explaining the difference between rtprtxqueue and rtprtxsend.
+
+2017-03-17 20:58:28 -0400  Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+	* sys/v4l2/meson.build:
+	  v4l2: Fix meson plugin shared object name
+	  It didn't match between AutoMake and Meson, and the Meson name
+	  didn't math the plugin name (video4linux2).
+
+2017-03-16 18:20:54 +0200  George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+	* gst/rtpmanager/gstrtprtxreceive.c:
+	  rtprtxreceive: fix example pipelines and improve the documentation
+	  https://bugzilla.gnome.org/show_bug.cgi?id=771383
+
+2017-03-17 14:10:40 +0000  Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
+
+	* gst/audioparsers/gstflacparse.c:
+	* gst/audioparsers/gstflacparse.h:
+	  flacparse: fix playback if sample number does not start at 0
+	  This reverts commit 29b807685d3c962bbe8afe351c5dca97d59eb5e0, while
+	  fixing the original breaking tests/check/pipelines/flacdec.
+
+2017-03-17 11:30:04 +0000  Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
+
+	* gst/audioparsers/gstflacparse.c:
+	* gst/audioparsers/gstflacparse.h:
+	  Revert "flacparse: fix playback if sample number does not start at 0"
+	  This breaks gst-validate on the build server (though not locally),
+	  and a unit test, and I can't run unit tests right now for some
+	  unrelated reason.
+	  This reverts commit 0747b56f8e7f4731d67f8d13a4bdc453dde0fdf7.
+
+2017-03-16 17:44:41 +0200  George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+	* gst/rtpmanager/rtpsession.c:
+	  rtpsession: print the correct variable in debug statement
+	  This debug statement is meant to print the time since the last (early)
+	  RTCP transmission, not the last regular RTCP transmission (which also
+	  happens to be set a few lines above to current_time, so the debug output
+	  is just confusing)
+
+2017-03-16 17:42:27 +0200  George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+	* gst/rtpmanager/gstrtprtxsend.c:
+	  rtprtxsend: convert LOG message to TRACE
+	  This is printed too often (for every chained buffer!) and just clutters the logs.
+
+2017-03-16 14:58:45 +0100  Miguel París Díaz <mparisdiaz@gmail.com>
+
+	* gst/rtpmanager/rtpsource.c:
+	  rtpsource: fix warning message
+	  https://bugzilla.gnome.org/show_bug.cgi?id=780105
+
+2017-03-16 13:54:54 +0000  Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
+
+	* gst/audioparsers/gstflacparse.c:
+	* gst/audioparsers/gstflacparse.h:
+	  flacparse: fix playback if sample number does not start at 0
+	  https://bugzilla.gnome.org/show_bug.cgi?id=777738
+
+2017-03-15 18:58:55 +0100  Miguel París Díaz <mparisdiaz@gmail.com>
+
+	* gst/rtpmanager/rtpsource.c:
+	* gst/rtpmanager/rtpsource.h:
+	  rtpsource: get clock-rate from pt if needed to generate SR
+	  https://bugzilla.gnome.org/show_bug.cgi?id=780105
+
+2017-03-16 13:52:48 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* ext/soup/gstsouphttpsrc.c:
+	  souphttpsrc: Include GStreamer souphttpsrc version in default User-Agent string
+
+2017-03-16 00:41:44 +0000  Tim-Philipp Müller <tim@centricular.com>
+
+	* gst/rtp/gstrtph264depay.c:
+	  rtph264depay: fix crash with empty sprops-parameters
+	  https://bugzilla.gnome.org/show_bug.cgi?id=780040
+
+2017-03-11 21:20:40 -0800  Thiago Santos <thiagossantos@gmail.com>
+
+	* gst/isomp4/atomsrecovery.c:
+	* gst/isomp4/atomsrecovery.h:
+	  atomsrecovery: also handle extra atoms after 'mdia' in a 'trak'
+	  Take into account the atoms at the end of the 'trak' atom when
+	  recovering it. So that its size (already computed and added in the trak
+	  size) isn't making offsets wrong.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=771478
+
+2017-03-11 12:56:33 -0800  Thiago Santos <thiagossantos@gmail.com>
+
+	* gst/isomp4/gstqtmux.c:
+	  qtmux: avoid fallthrough to moovrecovery failure section
+	  Return before that to preserve our successfull results, otherwise no
+	  moov recovery information would be written
+	  https://bugzilla.gnome.org/show_bug.cgi?id=771478
+
+2017-03-11 12:27:28 -0800  Thiago Santos <thiagossantos@gmail.com>
+
+	* gst/isomp4/atomsrecovery.c:
+	  atomsrecovery: expect more atom types at the headers
+	  Skip more atoms at the header until it finds the 'mdat' to continue the
+	  moov recovery
+	  https://bugzilla.gnome.org/show_bug.cgi?id=771478
+
+2017-03-14 16:42:25 -0400  Olivier Crête <olivier.crete@collabora.com>
+
+	* Makefile.am:
+	* configure.ac:
+	* tests/examples/Makefile.am:
+	* tests/examples/pulse/.gitignore:
+	* tests/examples/pulse/Makefile.am:
+	* tests/examples/pulse/pulse.c:
+	  pulse example: Remove
+	  That example only tested the property probe interface, which has been removed.
+	  The same kind of thing can now be done with the generic gst-device-monitor tool.
+
+2017-03-14 16:38:02 -0400  Olivier Crête <olivier.crete@collabora.com>
+
+	* sys/v4l2/gstv4l2object.h:
+	  v4l2: Remove unused macro
+
+2017-03-14 16:35:25 -0400  Olivier Crête <olivier.crete@collabora.com>
+
+	* sys/v4l2/gstv4l2object.c:
+	* sys/v4l2/gstv4l2object.h:
+	  v4l2: Remove unused definitions
+
+2017-03-14 10:10:19 +0100  Emeric Grange <egrange@gopro.com>
+
+	* gst/isomp4/fourcc.h:
+	* gst/isomp4/gstqtmux.c:
+	* gst/isomp4/gstqtmuxmap.c:
+	* gst/isomp4/qtdemux.c:
+	* gst/isomp4/qtdemux_types.c:
+	  qtmux: add CineForm support
+	  https://bugzilla.gnome.org/show_bug.cgi?id=780024
+
+2017-03-14 15:09:44 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/isomp4/gstqtmux.c:
+	  qtmux: Only create new chunks if we have more than a single stream
+	  There's no point in creating multiple chunks otherwise, it only wastes
+	  some bytes for storing the chunk offsets.
+
+2017-03-14 10:09:46 +0100  Emeric Grange <egrange@gopro.com>
+
+	* gst/isomp4/qtdemux.c:
+	  qtdemux: add S16L support
+	  https://bugzilla.gnome.org/show_bug.cgi?id=780022
+
+2017-03-14 15:48:08 +1100  Jan Schmidt <jan@centricular.com>
+
+	* tests/check/elements/splitmux.c:
+	  splitmux test: Use passed first/last timestamps
+	  Don't hard-code the expected timestamp range, use the
+	  values the caller is passing in.
+
+2017-03-12 11:42:25 -0400  Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+	* Makefile.am:
+	* docs/plugins/inspect/plugin-soup.xml:
+	  Add old plugin names to cruft list
+	  This will help fixing uninstalled setup. Also fix missing path
+	  correction in one of the plugin xml.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=779344
+
+2016-12-15 12:38:40 +0100  Michael Dutka <mail@michael-dutka.de>
+
+	* gst/rtp/gstrtph264depay.c:
+	* gst/rtp/gstrtph265depay.c:
+	  rtph264depay, rtph265depay: remove stray g_debug()
+	  https://bugzilla.gnome.org/show_bug.cgi?id=779858
+
+2017-03-10 11:24:14 +0100  Wim Taymans <wtaymans@redhat.com>
+
+	* gst/isomp4/gstqtmux.c:
+	  qtmux: init fourcc
+	  Initialize the fourcc to 0 so that we can detect failure later.
+
+2017-03-08 22:50:52 -0500  Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+	* tests/check/Makefile.am:
+	* tests/check/elements/level.c:
+	* tests/check/elements/rglimiter.c:
+	  tests: Add missing LDADD for libm in tests using math.h
+	  Also, remove the math.h include for the one that just prentend to need
+	  it.
+
+2017-03-08 22:15:46 -0500  Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+	* Makefile.am:
+	* docs/plugins/gst-plugins-good-plugins-docs.sgml:
+	  Fix shout2 plugin doc generation
+	  In the previous patch, we also renamed shout2send to shout2, so it does
+	  not clash with it's feature. Though we forgot to rename it in the doc
+	  reference. This patch also add a cruft detection on the xml that made me
+	  miss this error.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=779344
+
+2017-03-04 10:52:47 -0500  Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+	* docs/plugins/inspect/plugin-oss4.xml:
+	* docs/plugins/inspect/plugin-pulseaudio.xml:
+	* docs/plugins/inspect/plugin-shout2.xml:
+	* ext/pulse/Makefile.am:
+	* ext/pulse/meson.build:
+	* ext/shout2/gstshout2.c:
+	* ext/soup/Makefile.am:
+	* ext/soup/meson.build:
+	* sys/oss4/Makefile.am:
+	  Fix plugin filenames to match plugin names
+	  - libgstpulse.so becomes libgstpulseaudio.so
+	  - libgstsouphttpsrc.so becomes libgstsoup.so
+	  - libgstoss4audio.so becomes libgstoss4.so
+	  https://bugzilla.gnome.org/show_bug.cgi?id=779344
+
+2017-03-08 16:01:02 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/isomp4/atoms.c:
+	  qtmux: Free EDTS instead of just clearing it and setting it to NULL
+
+2017-03-08 15:27:32 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/isomp4/atoms.c:
+	* gst/isomp4/gstqtmux.c:
+	  qtmux: Fix some memory leaks related to timecode tracks
+
+2017-03-04 00:34:44 +1100  Jan Schmidt <jan@centricular.com>
+
+	* tests/check/elements/splitmux.c:
+	  splitmux: Add unit test for reverse playback
+	  Ensure that reverse playback works and generates the range
+	  of timestamps (0-3s) we expect, in monotonically descending order.
+
+2017-02-28 11:50:45 +1100  Jan Schmidt <jan@centricular.com>
+
+	* gst/multifile/gstsplitmuxsrc.c:
+	  splitmuxsrc: Fix reverse playback
+	  Fix the check for whether the start time of the segment has
+	  been reached when playing in reverse. Otherwise, playback
+	  stops after reaching the start of any file part, instead of
+	  continuing until all parts within the segment have played
+
+2017-02-22 03:01:31 +1100  Jan Schmidt <jan@centricular.com>
+
+	* gst/isomp4/qtdemux.c:
+	  qtdemux: Don't lose crypto info on a new moof
+	  We parse the next moof in advance of having pushed
+	  all samples from the previous one in some cases, and
+	  we'll still need the crypto info from the previous
+	  fragment so keep around any unused crypto info entries
+	  when adding new ones
+
+2017-02-27 13:55:58 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/isomp4/atoms.c:
+	* gst/isomp4/atoms.h:
+	* gst/isomp4/gstqtmux.c:
+	  qtmux: Update modification times when sending the moov
+	  https://bugzilla.gnome.org/show_bug.cgi?id=779422
+
+2017-03-01 16:11:47 -0800  Michael Smith <mlrsmith@gmail.com>
+
+	* gst/audioparsers/gstsbcparse.h:
+	  sbcparse: Fix up values for allocation enumeration.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=779389
+
+2017-02-28 13:10:50 +0200  George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+	* gst/rtpmanager/gstrtprtxreceive.c:
+	  rtprtxreceive: fix potential leak of old, unassociated, association requests
+	  https://bugzilla.gnome.org/show_bug.cgi?id=722560
+
+2017-02-28 15:47:23 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/avi/gstavidemux.c:
+	  avidemux: Don't increment -1 / unset indices
+	  CID 1398545
+
+2017-02-28 15:20:31 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/isomp4/qtdemux.c:
+	  qtdemux: Protect against NULL pointer dereference for streams without caps
+	  CID 1363332
+
+2017-02-28 12:57:02 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/rtp/gstrtph263pay.c:
+	  rtph263pay: Free mac on errors
+	  CID 1212149
+
+2017-02-28 12:45:24 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/rtp/gstrtpvorbispay.c:
+	  rtpvorbispay: Add missing break to for loop
+
+2017-02-28 11:02:54 +0100  Edward Hervey <edward@centricular.com>
+
+	* tests/check/Makefile.am:
+	  check: Fix splitmux test CFLAGS
+	  Needs to know where the gstapp headers are
+
+2017-02-27 21:02:51 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/isomp4/qtdemux.c:
+	  qtdemux: Fix compilation with gcc 7
+	  qtdemux.c: In function ‘qtdemux_parse_samples’:
+	  qtdemux.c:8450:39: error: ‘*’ in boolean context, suggest ‘&&’ instead [-Werror=int-in-bool-context]
+	  if (stream->samples_per_frame * stream->bytes_per_frame) {
+	  ~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
+
+2017-02-27 21:01:23 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/audioparsers/gstmpegaudioparse.c:
+	  mpegaudioparse: Fix compilation with gcc 7
+	  gstmpegaudioparse.c: In function ‘gst_mpeg_audio_parse_reset’:
+	  gstmpegaudioparse.c:209:3: error: ‘memset’ used with length equal to number of elements without multiplication by element size [-Werror=memset-elt-size]
+	  memset (mp3parse->xing_seek_table_inverse, 0, 256);
+	  ^~~~~~
+	  gstmpegaudioparse.c: In function ‘gst_mpeg_audio_parse_handle_first_frame’:
+	  gstmpegaudioparse.c:951:7: error: ‘memset’ used with length equal to number of elements without multiplication by element size [-Werror=memset-elt-size]
+	  memset (mp3parse->xing_seek_table_inverse, 0, 256);
+	  ^~~~~~
+
+2017-02-27 19:31:39 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/rtp/gstrtpvorbispay.c:
+	  rtpvorbispay: When getting new headers, replace the old version of them
+	  This prevents storing an infinite amount of e.g. comment headers if they
+	  come without a new initialization header in front of them. There can
+	  only be one header of each type.
+
+2017-02-27 19:25:35 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* tests/check/Makefile.am:
+	* tests/check/elements/rtp-payloading.c:
+	  rtp-payloading: Add new test for Vorbis renegotiation
+	  Check if encoding, payloading, depayloading and decoding works if the
+	  stream configuration (and thus the headers) change.
+
+2017-02-27 19:24:07 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/rtp/gstrtpvorbispay.c:
+	  vorbispay: Only replace headers when receiving a new config header
+	  If we also replace all headers when receiving any possibly following
+	  comments header, we would throw away the config header before being able
+	  to make use of it.
+
+2017-02-23 12:11:15 +0200  George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+	* tests/check/Makefile.am:
+	* tests/check/elements/splitmux.c:
+	  tests: splitmux: add unit test for content with sparse streams
+	  https://bugzilla.gnome.org/show_bug.cgi?id=761086
+
+2017-02-22 11:23:19 +0200  George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+	* gst/multifile/gstsplitmuxpartreader.c:
+	  splitmuxpartreader: ignore sparse streams when calculating the end offset of a part
+	  A sparse stream's ending timestamp can be considerably smaller
+	  than the ending timestamps of the other streams, which can lead
+	  to skipping considerable time from the next part.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=761086
+
+2017-02-22 11:21:06 +0200  George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+	* gst/multifile/gstsplitmuxpartreader.c:
+	  splitmuxpartreader: identify sparse streams
+
+2017-02-25 21:47:03 -0300  Edgard Lima <edgard.lima@gmail.com>
+
+	* docs/plugins/inspect/plugin-rtp.xml:
+	* docs/plugins/inspect/plugin-video4linux2.xml:
+	* gst/audioparsers/gstamrparse.c:
+	* gst/rtp/gstrtpg726depay.c:
+	* gst/rtp/gstrtpg726depay.h:
+	* gst/rtp/gstrtpg726pay.c:
+	* gst/rtp/gstrtpg726pay.h:
+	* gst/rtp/gstrtppcmadepay.c:
+	* gst/rtp/gstrtppcmadepay.h:
+	* gst/rtp/gstrtppcmapay.c:
+	* gst/rtp/gstrtppcmapay.h:
+	* gst/rtp/gstrtppcmudepay.c:
+	* gst/rtp/gstrtppcmudepay.h:
+	* gst/rtp/gstrtppcmupay.c:
+	* gst/rtp/gstrtppcmupay.h:
+	* gst/rtp/gstrtpspeexdepay.c:
+	* gst/rtp/gstrtpspeexdepay.h:
+	* gst/rtp/gstrtpspeexpay.c:
+	* gst/rtp/gstrtpspeexpay.h:
+	* sys/v4l2/gstv4l2.c:
+	* sys/v4l2/gstv4l2bufferpool.c:
+	* sys/v4l2/gstv4l2bufferpool.h:
+	* sys/v4l2/gstv4l2colorbalance.c:
+	* sys/v4l2/gstv4l2colorbalance.h:
+	* sys/v4l2/gstv4l2object.c:
+	* sys/v4l2/gstv4l2object.h:
+	* sys/v4l2/gstv4l2src.c:
+	* sys/v4l2/gstv4l2src.h:
+	* sys/v4l2/gstv4l2tuner.c:
+	* sys/v4l2/gstv4l2tuner.h:
+	* sys/v4l2/gstv4l2vidorient.c:
+	* sys/v4l2/gstv4l2vidorient.h:
+	* sys/v4l2/v4l2_calls.c:
+	* sys/v4l2/v4l2_calls.h:
+	  Update Edgard Lima's email
+	  https://bugzilla.gnome.org/show_bug.cgi?id=779230
+
+2017-02-08 13:36:00 +0000  Andrew <nifigase@gmail.com>
+
+	* gst/rtpmanager/gstrtpjitterbuffer.c:
+	* gst/rtpmanager/rtpjitterbuffer.c:
+	* gst/rtpmanager/rtpjitterbuffer.h:
+	  rtpjitterbuffer: Don't always reset PTS to 0 after a gap
+	  In function rtp_jitter_buffer_calculate_pts: If gap in incoming RTP
+	  timestamps is more than (3 * jbuf->clock_rate) we call
+	  rtp_jitter_buffer_reset_skew which resets pts to 0. So components down
+	  the pipeline (playes, mixers) just skip frames/samples until pts becomes
+	  equal to pts before gap.
+	  In version 1.10.2 and before this checking was bypassed for packets with
+	  "estimated dts", and gaps were handled correctly.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=778341
+
+2017-02-24 15:59:41 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* meson.build:
+	  meson: Update version
+
+2017-02-24 15:37:36 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* configure.ac:
+	  Back to development
+
 === release 1.11.2 ===
 
-2017-02-24  Sebastian Dröge <slomo@coaxion.net>
+2017-02-24 15:07:23 +0200  Sebastian Dröge <sebastian@centricular.com>
 
+	* ChangeLog:
+	* NEWS:
+	* RELEASE:
 	* configure.ac:
-	  releasing 1.11.2
+	* docs/plugins/gst-plugins-good-plugins.args:
+	* docs/plugins/inspect/plugin-1394.xml:
+	* docs/plugins/inspect/plugin-aasink.xml:
+	* docs/plugins/inspect/plugin-alaw.xml:
+	* docs/plugins/inspect/plugin-alpha.xml:
+	* docs/plugins/inspect/plugin-alphacolor.xml:
+	* docs/plugins/inspect/plugin-apetag.xml:
+	* docs/plugins/inspect/plugin-audiofx.xml:
+	* docs/plugins/inspect/plugin-audioparsers.xml:
+	* docs/plugins/inspect/plugin-auparse.xml:
+	* docs/plugins/inspect/plugin-autodetect.xml:
+	* docs/plugins/inspect/plugin-avi.xml:
+	* docs/plugins/inspect/plugin-cacasink.xml:
+	* docs/plugins/inspect/plugin-cairo.xml:
+	* docs/plugins/inspect/plugin-cutter.xml:
+	* docs/plugins/inspect/plugin-debug.xml:
+	* docs/plugins/inspect/plugin-deinterlace.xml:
+	* docs/plugins/inspect/plugin-dtmf.xml:
+	* docs/plugins/inspect/plugin-dv.xml:
+	* docs/plugins/inspect/plugin-effectv.xml:
+	* docs/plugins/inspect/plugin-equalizer.xml:
+	* docs/plugins/inspect/plugin-flac.xml:
+	* docs/plugins/inspect/plugin-flv.xml:
+	* docs/plugins/inspect/plugin-flxdec.xml:
+	* docs/plugins/inspect/plugin-gdkpixbuf.xml:
+	* docs/plugins/inspect/plugin-goom.xml:
+	* docs/plugins/inspect/plugin-goom2k1.xml:
+	* docs/plugins/inspect/plugin-icydemux.xml:
+	* docs/plugins/inspect/plugin-id3demux.xml:
+	* docs/plugins/inspect/plugin-imagefreeze.xml:
+	* docs/plugins/inspect/plugin-interleave.xml:
+	* docs/plugins/inspect/plugin-isomp4.xml:
+	* docs/plugins/inspect/plugin-jack.xml:
+	* docs/plugins/inspect/plugin-jpeg.xml:
+	* docs/plugins/inspect/plugin-level.xml:
+	* docs/plugins/inspect/plugin-matroska.xml:
+	* docs/plugins/inspect/plugin-mulaw.xml:
+	* docs/plugins/inspect/plugin-multifile.xml:
+	* docs/plugins/inspect/plugin-multipart.xml:
+	* docs/plugins/inspect/plugin-navigationtest.xml:
+	* docs/plugins/inspect/plugin-oss4.xml:
+	* docs/plugins/inspect/plugin-ossaudio.xml:
+	* docs/plugins/inspect/plugin-png.xml:
+	* docs/plugins/inspect/plugin-pulseaudio.xml:
+	* docs/plugins/inspect/plugin-replaygain.xml:
+	* docs/plugins/inspect/plugin-rtp.xml:
+	* docs/plugins/inspect/plugin-rtpmanager.xml:
+	* docs/plugins/inspect/plugin-rtsp.xml:
+	* docs/plugins/inspect/plugin-shapewipe.xml:
+	* docs/plugins/inspect/plugin-shout2send.xml:
+	* docs/plugins/inspect/plugin-smpte.xml:
+	* docs/plugins/inspect/plugin-soup.xml:
+	* docs/plugins/inspect/plugin-spectrum.xml:
+	* docs/plugins/inspect/plugin-speex.xml:
+	* docs/plugins/inspect/plugin-taglib.xml:
+	* docs/plugins/inspect/plugin-udp.xml:
+	* docs/plugins/inspect/plugin-video4linux2.xml:
+	* docs/plugins/inspect/plugin-videobox.xml:
+	* docs/plugins/inspect/plugin-videocrop.xml:
+	* docs/plugins/inspect/plugin-videofilter.xml:
+	* docs/plugins/inspect/plugin-videomixer.xml:
+	* docs/plugins/inspect/plugin-vpx.xml:
+	* docs/plugins/inspect/plugin-wavenc.xml:
+	* docs/plugins/inspect/plugin-wavpack.xml:
+	* docs/plugins/inspect/plugin-wavparse.xml:
+	* docs/plugins/inspect/plugin-ximagesrc.xml:
+	* docs/plugins/inspect/plugin-y4menc.xml:
+	* gst-plugins-good.doap:
+	  Release 1.11.2
+
+2017-02-24 12:50:21 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* po/af.po:
+	* po/az.po:
+	* po/bg.po:
+	* po/ca.po:
+	* po/cs.po:
+	* po/da.po:
+	* po/de.po:
+	* po/el.po:
+	* po/en_GB.po:
+	* po/eo.po:
+	* po/es.po:
+	* po/eu.po:
+	* po/fi.po:
+	* po/fr.po:
+	* po/gl.po:
+	* po/hr.po:
+	* po/hu.po:
+	* po/id.po:
+	* po/it.po:
+	* po/ja.po:
+	* po/lt.po:
+	* po/lv.po:
+	* po/mt.po:
+	* po/nb.po:
+	* po/nl.po:
+	* po/or.po:
+	* po/pl.po:
+	* po/pt_BR.po:
+	* po/ro.po:
+	* po/ru.po:
+	* po/sk.po:
+	* po/sl.po:
+	* po/sq.po:
+	* po/sr.po:
+	* po/sv.po:
+	* po/tr.po:
+	* po/uk.po:
+	* po/vi.po:
+	* po/zh_CN.po:
+	* po/zh_HK.po:
+	* po/zh_TW.po:
+	  Update .po files
 
 2017-02-24 12:44:58 +0200  Sebastian Dröge <sebastian@centricular.com>