Initial import of fatgrind.HEADmaster

1 files changed, 969 insertions, 0 deletions

diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000..fbd2dac
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,969 @@
+# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+
+
+pkgdatadir = $(datadir)/valgrind
+pkglibdir = $(libdir)/valgrind
+pkgincludedir = $(includedir)/valgrind
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-unknown-linux-gnu
+host_triplet = x86_64-unknown-linux-gnu
+DIST_COMMON = README $(am__configure_deps) $(dist_noinst_DATA) \
+	$(dist_val_DATA) $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(srcdir)/config.h.in $(srcdir)/glibc-2.X.supp.in \
+	$(srcdir)/valgrind.pc.in $(srcdir)/valgrind.spec.in \
+	$(top_srcdir)/Makefile.all.am $(top_srcdir)/configure \
+	$(top_srcdir)/drd/scripts/download-and-build-splash2.in \
+	$(top_srcdir)/fat/Makefile.in AUTHORS COPYING INSTALL NEWS \
+	compile config.guess config.sub depcomp install-sh missing
+#am__append_1 = valt_load_address_x86_linux.lds
+#am__append_2 = valt_load_address_x86_linux.lds
+am__append_3 = valt_load_address_amd64_linux.lds
+am__append_4 = valt_load_address_amd64_linux.lds
+#am__append_5 = valt_load_address_ppc32_linux.lds
+#am__append_6 = valt_load_address_ppc32_linux.lds
+#am__append_7 = valt_load_address_ppc64_linux.lds
+#am__append_8 = valt_load_address_ppc64_linux.lds
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES = valgrind.spec valgrind.pc glibc-2.X.supp \
+	fat/Makefile drd/scripts/download-and-build-splash2
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-dvi-recursive install-exec-recursive \
+	install-html-recursive install-info-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
+	installcheck-recursive installdirs-recursive pdf-recursive \
+	ps-recursive uninstall-recursive
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__installdirs = "$(DESTDIR)$(valdir)" "$(DESTDIR)$(pkgconfigdir)" \
+	"$(DESTDIR)$(incincdir)"
+dist_valDATA_INSTALL = $(INSTALL_DATA)
+pkgconfigDATA_INSTALL = $(INSTALL_DATA)
+DATA = $(dist_noinst_DATA) $(dist_val_DATA) $(pkgconfig_DATA)
+nodist_incincHEADERS_INSTALL = $(INSTALL_HEADER)
+HEADERS = $(nodist_incinc_HEADERS)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d $(distdir) \
+    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr $(distdir); }; }
+DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = ${SHELL} /home/steph/compile/valgrind/missing --run aclocal-1.10
+AMTAR = ${SHELL} /home/steph/compile/valgrind/missing --run tar
+AR = /usr/bin/ar
+AUTOCONF = ${SHELL} /home/steph/compile/valgrind/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/steph/compile/valgrind/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/steph/compile/valgrind/missing --run automake-1.10
+AWK = gawk
+BOOST_CFLAGS = 
+BOOST_LIBS = -lboost_thread-mt -m64
+CC = gcc
+CCAS = gcc
+CCASDEPMODE = depmode=gcc3
+CCASFLAGS = -Wno-long-long
+CCDEPMODE = depmode=gcc3
+CFLAGS = -Wno-long-long -Wno-pointer-sign -Wdeclaration-after-statement -fno-stack-protector
+CPP = gcc -E
+CPPFLAGS = 
+CXX = g++
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS = -g -O2
+CYGPATH_W = echo
+DEFAULT_SUPP = exp-ptrcheck.supp xfree-3.supp xfree-4.supp glibc-2.X-drd.supp glibc-2.34567-NPTL-helgrind.supp glibc-2.X.supp 
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DIFF = diff -u
+DISTCHECK_CONFIGURE_FLAGS = --with-vex=$(top_srcdir)/VEX
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+FLAG_FNO_STACK_PROTECTOR = -fno-stack-protector
+FLAG_M32 = -m32
+FLAG_M64 = -m64
+FLAG_MAIX32 = 
+FLAG_MAIX64 = 
+FLAG_MMMX = -mmmx
+FLAG_MSSE = -msse
+FLAG_UNLIMITED_INLINE_UNIT_GROWTH = --param inline-unit-growth=900
+FLAG_WDECL_AFTER_STMT = -Wdeclaration-after-statement
+FLAG_W_EXTRA = -Wextra
+FLAG_W_NO_FORMAT_ZERO_LENGTH = -Wno-format-zero-length
+GDB = /usr/bin/gdb
+GLIBC_VERSION = 2.8
+GREP = /bin/grep
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+LDFLAGS = 
+LIBOBJS = 
+LIBS = 
+LN_S = ln -s
+LTLIBOBJS = 
+MAINT = #
+MAKEINFO = ${SHELL} /home/steph/compile/valgrind/missing --run makeinfo
+MKDIR_P = /bin/mkdir -p
+MPI_CC = mpicc
+OBJEXT = o
+PACKAGE = valgrind
+PACKAGE_BUGREPORT = valgrind-users@lists.sourceforge.net
+PACKAGE_NAME = Valgrind
+PACKAGE_STRING = Valgrind 3.5.0.SVN
+PACKAGE_TARNAME = valgrind
+PACKAGE_VERSION = 3.5.0.SVN
+PATH_SEPARATOR = :
+PERL = /usr/bin/perl
+PKG_CONFIG = /usr/bin/pkg-config
+PREFERRED_STACK_BOUNDARY = 
+QTCORE_CFLAGS = -DQT_SHARED -I/usr/include/QtCore  
+QTCORE_LIBS = -lQtCore  
+RANLIB = ranlib
+SET_MAKE = 
+SHELL = /bin/sh
+STRIP = 
+VALT_LOAD_ADDRESS = 0x38000000
+VERSION = 3.5.0.SVN
+VEX_DIR = $(top_srcdir)/VEX
+VGCONF_ARCH_PRI = amd64
+VGCONF_OS = linux
+VGCONF_PLATFORM_PRI_CAPS = AMD64_LINUX
+VGCONF_PLATFORM_SEC_CAPS = 
+abs_builddir = /home/steph/compile/valgrind
+abs_srcdir = /home/steph/compile/valgrind
+abs_top_builddir = /home/steph/compile/valgrind
+abs_top_srcdir = /home/steph/compile/valgrind
+ac_ct_CC = gcc
+ac_ct_CXX = g++
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-unknown-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = unknown
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = x86_64-unknown-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = unknown
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = $(SHELL) /home/steph/compile/valgrind/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+mandir = ${datarootdir}/man
+mkdir_p = /bin/mkdir -p
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+prefix = /usr/local
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = ${prefix}/etc
+target_alias = 
+top_builddir = .
+top_srcdir = .
+AUTOMAKE_OPTIONS = foreign 1.7 dist-bzip2
+valdir = $(libdir)/valgrind
+inplacedir = $(top_builddir)/.in_place
+TOOLS = memcheck \
+		cachegrind \
+		callgrind \
+		fat \
+		massif \
+		lackey \
+		none \
+		helgrind \
+		drd
+
+EXP_TOOLS = exp-omega \
+		exp-ptrcheck
+
+
+# Put docs last because building the HTML is slow and we want to get
+# everything else working before we try it.
+SUBDIRS = include coregrind . tests perf auxprogs $(TOOLS) $(EXP_TOOLS) docs
+DIST_SUBDIRS = $(SUBDIRS)
+SUPP_FILES = \
+	glibc-2.2.supp glibc-2.3.supp glibc-2.4.supp glibc-2.5.supp \
+	glibc-2.6.supp glibc-2.7.supp glibc-2.X.supp.in \
+	aix5libc.supp xfree-3.supp xfree-4.supp \
+	glibc-2.34567-NPTL-helgrind.supp \
+	glibc-2.2-LinuxThreads-helgrind.supp \
+	glibc-2.X-drd.supp \
+	exp-ptrcheck.supp
+
+DEFAULT_SUPP_FILES = exp-ptrcheck.supp xfree-3.supp xfree-4.supp glibc-2.X-drd.supp glibc-2.34567-NPTL-helgrind.supp glibc-2.X.supp 
+
+# We include all .supp files in the distribution, but only install
+# default.supp.
+dist_val_DATA = default.supp
+dist_noinst_DATA = $(SUPP_FILES)
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = valgrind.pc
+incincdir = $(includedir)/valgrind
+nodist_incinc_HEADERS = $(VEX_PUBLIC_HDRS)
+BUILT_SOURCES = default.supp valgrind.pc $(am__append_1) \
+	$(am__append_3) $(am__append_5) $(am__append_7)
+CLEANFILES = $(am__append_2) $(am__append_4) $(am__append_6) \
+	$(am__append_8)
+DISTCLEANFILES = default.supp
+
+# Nb: no need to include any Makefile.am files here, or files included from
+# them, as automake includes them automatically.
+EXTRA_DIST = \
+	ACKNOWLEDGEMENTS \
+	README_DEVELOPERS \
+	README_PACKAGERS \
+	README_MISSING_SYSCALL_OR_IOCTL \
+	valgrind.spec.in valgrind.pc.in \
+	$(vex_primary_sources) \
+	vg-in-place
+
+
+# These list the bits of vex we need to install
+VEX_PUBLIC_HDRS = \
+	$(top_srcdir)/VEX/pub/libvex_guest_amd64.h \
+	$(top_srcdir)/VEX/pub/libvex_ir.h \
+	$(top_srcdir)/VEX/pub/libvex_guest_ppc32.h \
+	$(top_srcdir)/VEX/pub/libvex_guest_ppc64.h \
+	$(top_srcdir)/VEX/pub/libvex_basictypes.h \
+	$(top_srcdir)/VEX/pub/libvex_guest_offsets.h \
+	$(top_srcdir)/VEX/pub/libvex_emwarn.h \
+	$(top_srcdir)/VEX/pub/libvex.h \
+	$(top_srcdir)/VEX/pub/libvex_trc_values.h \
+	$(top_srcdir)/VEX/pub/libvex_guest_arm.h \
+	$(top_srcdir)/VEX/pub/libvex_guest_x86.h
+
+
+# These list the bits of vex we need to copy into the tarball
+vex_primary_sources = \
+	VEX/quote.txt \
+	VEX/newline.txt \
+	VEX/HACKING.README \
+	VEX/LICENSE.README \
+	VEX/LICENSE.GPL \
+	VEX/Makefile \
+	VEX/auxprogs/genoffsets.c \
+	VEX/pub/libvex_guest_amd64.h \
+	VEX/pub/libvex_ir.h \
+	VEX/pub/libvex_guest_ppc32.h \
+	VEX/pub/libvex_guest_ppc64.h \
+	VEX/pub/libvex_basictypes.h \
+	VEX/pub/libvex_guest_offsets.h \
+	VEX/pub/libvex_emwarn.h \
+	VEX/pub/libvex.h \
+	VEX/pub/libvex_trc_values.h \
+	VEX/pub/libvex_guest_arm.h \
+	VEX/pub/libvex_guest_x86.h \
+	VEX/priv/ir/irmatch.c \
+	VEX/priv/ir/irmatch.h \
+	VEX/priv/ir/irdefs.c \
+	VEX/priv/ir/iropt.c \
+	VEX/priv/ir/iropt.h \
+	VEX/priv/host-ppc/isel.c \
+	VEX/priv/host-ppc/hdefs.c \
+	VEX/priv/host-ppc/hdefs.h \
+	VEX/priv/main/vex_svnversion.h \
+	VEX/priv/main/vex_globals.c \
+	VEX/priv/main/vex_globals.h \
+	VEX/priv/main/vex_main.c \
+	VEX/priv/main/vex_util.c \
+	VEX/priv/main/vex_util.h \
+	VEX/priv/guest-arm/ghelpers.c \
+	VEX/priv/guest-arm/gdefs.h \
+	VEX/priv/guest-arm/toIR.c \
+	VEX/priv/guest-x86/ghelpers.c \
+	VEX/priv/guest-x86/gdefs.h \
+	VEX/priv/guest-x86/toIR.c \
+	VEX/priv/guest-generic/g_generic_x87.c \
+	VEX/priv/guest-generic/g_generic_x87.h \
+	VEX/priv/guest-generic/bb_to_IR.c \
+	VEX/priv/guest-generic/bb_to_IR.h \
+	VEX/priv/host-arm/isel.c \
+	VEX/priv/host-arm/hdefs.c \
+	VEX/priv/host-arm/hdefs.h \
+	VEX/priv/host-x86/isel.c \
+	VEX/priv/host-x86/hdefs.c \
+	VEX/priv/host-x86/hdefs.h \
+	VEX/priv/guest-amd64/ghelpers.c \
+	VEX/priv/guest-amd64/gdefs.h \
+	VEX/priv/guest-amd64/toIR.c \
+	VEX/priv/guest-ppc/ghelpers.c \
+	VEX/priv/guest-ppc/gdefs.h \
+	VEX/priv/guest-ppc/toIR.c \
+	VEX/priv/host-generic/reg_alloc2.c \
+	VEX/priv/host-generic/h_generic_regs.c \
+	VEX/priv/host-generic/h_generic_regs.h \
+	VEX/priv/host-generic/h_generic_simd64.c \
+	VEX/priv/host-generic/h_generic_simd64.h \
+	VEX/priv/host-amd64/isel.c \
+	VEX/priv/host-amd64/hdefs.c \
+	VEX/priv/host-amd64/hdefs.h
+
+all: $(BUILT_SOURCES) config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+am--refresh:
+	@:
+$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/Makefile.all.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
+	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: # $(am__configure_deps)
+	cd $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.h: stamp-h1
+	@if test ! -f $@; then \
+	  rm -f stamp-h1; \
+	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
+	else :; fi
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in: # $(am__configure_deps) 
+	cd $(top_srcdir) && $(AUTOHEADER)
+	rm -f stamp-h1
+	touch $@
+
+distclean-hdr:
+	-rm -f config.h stamp-h1
+valgrind.spec: $(top_builddir)/config.status $(srcdir)/valgrind.spec.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+valgrind.pc: $(top_builddir)/config.status $(srcdir)/valgrind.pc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+glibc-2.X.supp: $(top_builddir)/config.status $(srcdir)/glibc-2.X.supp.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+fat/Makefile: $(top_builddir)/config.status $(top_srcdir)/fat/Makefile.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+drd/scripts/download-and-build-splash2: $(top_builddir)/config.status $(top_srcdir)/drd/scripts/download-and-build-splash2.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+install-dist_valDATA: $(dist_val_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(valdir)" || $(MKDIR_P) "$(DESTDIR)$(valdir)"
+	@list='$(dist_val_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f=$(am__strip_dir) \
+	  echo " $(dist_valDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(valdir)/$$f'"; \
+	  $(dist_valDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(valdir)/$$f"; \
+	done
+
+uninstall-dist_valDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(dist_val_DATA)'; for p in $$list; do \
+	  f=$(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(valdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(valdir)/$$f"; \
+	done
+install-pkgconfigDATA: $(pkgconfig_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
+	@list='$(pkgconfig_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f=$(am__strip_dir) \
+	  echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
+	  $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
+	done
+
+uninstall-pkgconfigDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pkgconfig_DATA)'; for p in $$list; do \
+	  f=$(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
+	done
+install-nodist_incincHEADERS: $(nodist_incinc_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(incincdir)" || $(MKDIR_P) "$(DESTDIR)$(incincdir)"
+	@list='$(nodist_incinc_HEADERS)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f=$(am__strip_dir) \
+	  echo " $(nodist_incincHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(incincdir)/$$f'"; \
+	  $(nodist_incincHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(incincdir)/$$f"; \
+	done
+
+uninstall-nodist_incincHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(nodist_incinc_HEADERS)'; for p in $$list; do \
+	  f=$(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(incincdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(incincdir)/$$f"; \
+	done
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	test -d $(distdir) || mkdir $(distdir)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || $(MKDIR_P) "$(distdir)/$$subdir" \
+	    || exit 1; \
+	    distdir=`$(am__cd) $(distdir) && pwd`; \
+	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$top_distdir" \
+	        distdir="$$distdir/$$subdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r $(distdir)
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && cd $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@cd $(distuninstallcheck_dir) \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) check-recursive
+all-am: Makefile $(DATA) $(HEADERS) config.h all-local
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(valdir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(incincdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-dist_valDATA install-nodist_incincHEADERS \
+	install-pkgconfigDATA
+
+install-dvi: install-dvi-recursive
+
+install-exec-am:
+	@$(NORMAL_INSTALL)
+	$(MAKE) $(AM_MAKEFLAGS) install-exec-hook
+
+install-html: install-html-recursive
+
+install-info: install-info-recursive
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-ps: install-ps-recursive
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-dist_valDATA uninstall-nodist_incincHEADERS \
+	uninstall-pkgconfigDATA
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
+	install-exec-am install-strip
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+	all all-am all-local am--refresh check check-am clean \
+	clean-generic clean-local ctags ctags-recursive dist dist-all \
+	dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ dist-zip \
+	distcheck distclean distclean-generic distclean-hdr \
+	distclean-tags distcleancheck distdir distuninstallcheck dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dist_valDATA install-dvi \
+	install-dvi-am install-exec install-exec-am install-exec-hook \
+	install-html install-html-am install-info install-info-am \
+	install-man install-nodist_incincHEADERS install-pdf \
+	install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
+	tags-recursive uninstall uninstall-am uninstall-dist_valDATA \
+	uninstall-nodist_incincHEADERS uninstall-pkgconfigDATA
+
+
+# The kludge that passes for vex's build system can't handle parallel
+# builds.  So, for the time being, serialise all Valgrind building.
+# (this is equivalent to enforcing "make -j 1".
+.NOTPARALLEL:
+# No need to generate valt_load_address*.lds; the final executables
+# can be linked to be at any address.  They will be relocated by
+# AIX kernel when they are loaded.
+# Ditto
+
+default.supp: $(DEFAULT_SUPP_FILES)
+	echo "# This is a generated file, composed of the following suppression rules:" > default.supp
+	echo "# " $(DEFAULT_SUPP_FILES) >> default.supp
+	cat $(DEFAULT_SUPP_FILES) >> default.supp
+
+regtest: check
+	/usr/bin/perl tests/vg_regtest $(TOOLS) $(EXP_TOOLS)
+nonexp-regtest: check
+	/usr/bin/perl tests/vg_regtest $(TOOLS)
+exp-regtest: check
+	/usr/bin/perl tests/vg_regtest $(EXP_TOOLS)
+
+perf: check
+	/usr/bin/perl perf/vg_perf perf
+
+install-exec-hook:
+	$(mkinstalldirs) $(DESTDIR)$(valdir)
+
+all-local: default.supp
+	mkdir -p $(inplacedir)
+	rm -f $(inplacedir)/default.supp
+	ln -s ../default.supp $(inplacedir)
+
+clean-local:
+	rm -rf $(inplacedir)
+
+# Generate a linker script for linking the binaries.  This is the
+# standard gcc linker script, except hacked so that an alternative
+# load address can be specified by (1) asking gcc to use this script
+# (-Wl,-T,valt_load_address.lds) and (2) setting the symbol
+# valt_load_address to the required value
+# (-Wl,-defsym,valt_load_address=0x70000000).
+#
+# Extract ld's default linker script and hack it to our needs.
+# First we cut everything above and below the "=====..." lines at the top
+# and bottom.
+# Then we have to replace the load address with "valt_load_address".
+# The line to replace in has one of the following two forms:
+#
+#   . = 0x08048000 + SIZEOF_HEADERS;
+#
+# or
+#   PROVIDE (__executable_start = 0x08048000); . = 0x08048000 + SIZEOF_HEADERS;
+#
+# So we search for the line with a hex value "+ SIZEOF_HEADERS", and replace
+# all the hex values in that line with "valt_load_address".
+valt_load_address_x86_linux.lds: Makefile
+	$(CC) -m32 -Wl,--verbose -nostdlib 2>&1 | sed \
+		-e '1,/^=====\+$$/d' \
+		-e '/^=====\+$$/,/.\*/d' \
+		-e '/\. = \(0x[0-9A-Fa-f]\+\|SEGMENT_START("[^"]\+", 0x[0-9A-Fa-f]\+)\) + SIZEOF_HEADERS/s/0x[0-9A-Fa-f]\+/valt_load_address/g' > $@ \
+	|| rm -f $@
+
+valt_load_address_amd64_linux.lds: Makefile
+	$(CC) -m64 -Wl,--verbose -nostdlib 2>&1 | sed \
+		-e '1,/^=====\+$$/d' \
+		-e '/^=====\+$$/,/.\*/d' \
+		-e '/\. = \(0x[0-9A-Fa-f]\+\|SEGMENT_START("[^"]\+", 0x[0-9A-Fa-f]\+)\) + SIZEOF_HEADERS/s/0x[0-9A-Fa-f]\+/valt_load_address/g' > $@ \
+	|| rm -f $@
+
+valt_load_address_ppc32_linux.lds: Makefile
+	$(CC) -m32 -Wl,--verbose -nostdlib 2>&1 | sed \
+		-e '1,/^=====\+$$/d' \
+		-e '/^=====\+$$/,/.\*/d' \
+		-e '/\. = \(0x[0-9A-Fa-f]\+\|SEGMENT_START("[^"]\+", 0x[0-9A-Fa-f]\+)\) + SIZEOF_HEADERS/s/0x[0-9A-Fa-f]\+/valt_load_address/g' > $@ \
+	|| rm -f $@
+
+valt_load_address_ppc64_linux.lds: Makefile
+	$(CC) -m64 -Wl,--verbose -nostdlib 2>&1 | sed \
+		-e '1,/^=====\+$$/d' \
+		-e '/^=====\+$$/,/.\*/d' \
+		-e '/\. = \(0x[0-9A-Fa-f]\+\|SEGMENT_START("[^"]\+", 0x[0-9A-Fa-f]\+)\) + SIZEOF_HEADERS/s/0x[0-9A-Fa-f]\+/valt_load_address/g' > $@ \
+	|| rm -f $@
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: