diff options
Diffstat (limited to 'src/settings/plugins/ifupdown/tests/Makefile.in')
| -rw-r--r-- | src/settings/plugins/ifupdown/tests/Makefile.in | 437 |
1 files changed, 347 insertions, 90 deletions
diff --git a/src/settings/plugins/ifupdown/tests/Makefile.in b/src/settings/plugins/ifupdown/tests/Makefile.in index d8c5b39ec..a1c029c32 100644 --- a/src/settings/plugins/ifupdown/tests/Makefile.in +++ b/src/settings/plugins/ifupdown/tests/Makefile.in @@ -206,13 +206,196 @@ am__tty_colors = { \ std='[m'; \ fi; \ } +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__recheck_rx = ^[ ]*:recheck:[ ]* +am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* +am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]* +# A command that, given a newline-separated list of test names on the +# standard input, print the name of the tests that are to be re-run +# upon "make recheck". +am__list_recheck_tests = $(AWK) '{ \ + recheck = 1; \ + while ((rc = (getline line < ($$0 ".trs"))) != 0) \ + { \ + if (rc < 0) \ + { \ + if ((getline line2 < ($$0 ".log")) < 0) \ + recheck = 0; \ + break; \ + } \ + else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ + { \ + recheck = 0; \ + break; \ + } \ + else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ + { \ + break; \ + } \ + }; \ + if (recheck) \ + print $$0; \ + close ($$0 ".trs"); \ + close ($$0 ".log"); \ +}' +# A command that, given a newline-separated list of test names on the +# standard input, create the global log from their .trs and .log files. +am__create_global_log = $(AWK) ' \ +function fatal(msg) \ +{ \ + print "fatal: making $@: " msg | "cat >&2"; \ + exit 1; \ +} \ +function rst_section(header) \ +{ \ + print header; \ + len = length(header); \ + for (i = 1; i <= len; i = i + 1) \ + printf "="; \ + printf "\n\n"; \ +} \ +{ \ + copy_in_global_log = 1; \ + global_test_result = "RUN"; \ + while ((rc = (getline line < ($$0 ".trs"))) != 0) \ + { \ + if (rc < 0) \ + fatal("failed to read from " $$0 ".trs"); \ + if (line ~ /$(am__global_test_result_rx)/) \ + { \ + sub("$(am__global_test_result_rx)", "", line); \ + sub("[ ]*$$", "", line); \ + global_test_result = line; \ + } \ + else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ + copy_in_global_log = 0; \ + }; \ + if (copy_in_global_log) \ + { \ + rst_section(global_test_result ": " $$0); \ + while ((rc = (getline line < ($$0 ".log"))) != 0) \ + { \ + if (rc < 0) \ + fatal("failed to read from " $$0 ".log"); \ + print line; \ + }; \ + printf "\n"; \ + }; \ + close ($$0 ".trs"); \ + close ($$0 ".log"); \ +}' +# Restructured Text title. +am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } +# Solaris 10 'make', and several other traditional 'make' implementations, +# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it +# by disabling -e (using the XSI extension "set +e") if it's set. +am__sh_e_setup = case $$- in *e*) set +e;; esac +# Default flags passed to test drivers. +am__common_driver_flags = \ + --color-tests "$$am__color_tests" \ + --enable-hard-errors "$$am__enable_hard_errors" \ + --expect-failure "$$am__expect_failure" +# To be inserted before the command running the test. Creates the +# directory for the log if needed. Stores in $dir the directory +# containing $f, in $tst the test, in $log the log. Executes the +# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and +# passes TESTS_ENVIRONMENT. Set up options for the wrapper that +# will run the test scripts (or their associated LOG_COMPILER, if +# thy have one). +am__check_pre = \ +$(am__sh_e_setup); \ +$(am__vpath_adj_setup) $(am__vpath_adj) \ +$(am__tty_colors); \ +srcdir=$(srcdir); export srcdir; \ +case "$@" in \ + */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ + *) am__odir=.;; \ +esac; \ +test "x$$am__odir" = x"." || test -d "$$am__odir" \ + || $(MKDIR_P) "$$am__odir" || exit $$?; \ +if test -f "./$$f"; then dir=./; \ +elif test -f "$$f"; then dir=; \ +else dir="$(srcdir)/"; fi; \ +tst=$$dir$$f; log='$@'; \ +if test -n '$(DISABLE_HARD_ERRORS)'; then \ + am__enable_hard_errors=no; \ +else \ + am__enable_hard_errors=yes; \ +fi; \ +case " $(XFAIL_TESTS) " in \ + *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ + am__expect_failure=yes;; \ + *) \ + am__expect_failure=no;; \ +esac; \ +$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) +# A shell command to get the names of the tests scripts with any registered +# extension removed (i.e., equivalently, the names of the test logs, with +# the '.log' extension removed). The result is saved in the shell variable +# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, +# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", +# since that might cause problem with VPATH rewrites for suffix-less tests. +# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. +am__set_TESTS_bases = \ + bases='$(TEST_LOGS)'; \ + bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ + bases=`echo $$bases` +RECHECK_LOGS = $(TEST_LOGS) +AM_RECURSIVE_TARGETS = check recheck +TEST_SUITE_LOG = test-suite.log +TEST_EXTENSIONS = @EXEEXT@ .test +LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS) +am__set_b = \ + case '$@' in \ + */*) \ + case '$*' in \ + */*) b='$*';; \ + *) b=`echo '$@' | sed 's/\.log$$//'`; \ + esac;; \ + *) \ + b='$*';; \ + esac +am__test_logs1 = $(TESTS:=.log) +am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log) +TEST_LOGS = $(am__test_logs2:.test.log=.log) +TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/build-aux/test-driver +TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \ + $(TEST_LOG_FLAGS) am__DIST_COMMON = $(srcdir)/Makefile.in \ - $(top_srcdir)/build-aux/depcomp + $(top_srcdir)/build-aux/depcomp \ + $(top_srcdir)/build-aux/test-driver DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AM_TESTS_FD_REDIRECT = @AM_TESTS_FD_REDIRECT@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ @@ -326,6 +509,7 @@ LIBTEAMDCTL_LIBS = @LIBTEAMDCTL_LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ +LOG_DRIVER = @LOG_DRIVER@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ @@ -499,7 +683,7 @@ EXTRA_DIST = \ all: all-am .SUFFIXES: -.SUFFIXES: .c .lo .o .obj +.SUFFIXES: .c .lo .log .o .obj .test .test$(EXEEXT) .trs $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ @@ -660,98 +844,168 @@ cscopelist-am: $(am__tagged_files) distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -check-TESTS: $(TESTS) - @failed=0; all=0; xfail=0; xpass=0; skip=0; \ - srcdir=$(srcdir); export srcdir; \ - list=' $(TESTS) '; \ - $(am__tty_colors); \ - if test -n "$$list"; then \ - for tst in $$list; do \ - if test -f ./$$tst; then dir=./; \ - elif test -f $$tst; then dir=; \ - else dir="$(srcdir)/"; fi; \ - if $(TESTS_ENVIRONMENT) $${dir}$$tst $(AM_TESTS_FD_REDIRECT); then \ - all=`expr $$all + 1`; \ - case " $(XFAIL_TESTS) " in \ - *[\ \ ]$$tst[\ \ ]*) \ - xpass=`expr $$xpass + 1`; \ - failed=`expr $$failed + 1`; \ - col=$$red; res=XPASS; \ - ;; \ - *) \ - col=$$grn; res=PASS; \ - ;; \ - esac; \ - elif test $$? -ne 77; then \ - all=`expr $$all + 1`; \ - case " $(XFAIL_TESTS) " in \ - *[\ \ ]$$tst[\ \ ]*) \ - xfail=`expr $$xfail + 1`; \ - col=$$lgn; res=XFAIL; \ - ;; \ - *) \ - failed=`expr $$failed + 1`; \ - col=$$red; res=FAIL; \ - ;; \ - esac; \ - else \ - skip=`expr $$skip + 1`; \ - col=$$blu; res=SKIP; \ - fi; \ - echo "$${col}$$res$${std}: $$tst"; \ - done; \ - if test "$$all" -eq 1; then \ - tests="test"; \ - All=""; \ - else \ - tests="tests"; \ - All="All "; \ +# Recover from deleted '.trs' file; this should ensure that +# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create +# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells +# to avoid problems with "make -n". +.log.trs: + rm -f $< $@ + $(MAKE) $(AM_MAKEFLAGS) $< + +# Leading 'am--fnord' is there to ensure the list of targets does not +# expand to empty, as could happen e.g. with make check TESTS=''. +am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) +am--force-recheck: + @: + +$(TEST_SUITE_LOG): $(TEST_LOGS) + @$(am__set_TESTS_bases); \ + am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ + redo_bases=`for i in $$bases; do \ + am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ + done`; \ + if test -n "$$redo_bases"; then \ + redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ + redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ + if $(am__make_dryrun); then :; else \ + rm -f $$redo_logs && rm -f $$redo_results || exit 1; \ fi; \ - if test "$$failed" -eq 0; then \ - if test "$$xfail" -eq 0; then \ - banner="$$All$$all $$tests passed"; \ - else \ - if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \ - banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \ - fi; \ - else \ - if test "$$xpass" -eq 0; then \ - banner="$$failed of $$all $$tests failed"; \ + fi; \ + if test -n "$$am__remaking_logs"; then \ + echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ + "recursion detected" >&2; \ + elif test -n "$$redo_logs"; then \ + am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ + fi; \ + if $(am__make_dryrun); then :; else \ + st=0; \ + errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ + for i in $$redo_bases; do \ + test -f $$i.trs && test -r $$i.trs \ + || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ + test -f $$i.log && test -r $$i.log \ + || { echo "$$errmsg $$i.log" >&2; st=1; }; \ + done; \ + test $$st -eq 0 || exit 1; \ + fi + @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ + ws='[ ]'; \ + results=`for b in $$bases; do echo $$b.trs; done`; \ + test -n "$$results" || results=/dev/null; \ + all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ + pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ + fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ + skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ + xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ + xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ + error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ + if test `expr $$fail + $$xpass + $$error` -eq 0; then \ + success=true; \ + else \ + success=false; \ + fi; \ + br='==================='; br=$$br$$br$$br$$br; \ + result_count () \ + { \ + if test x"$$1" = x"--maybe-color"; then \ + maybe_colorize=yes; \ + elif test x"$$1" = x"--no-color"; then \ + maybe_colorize=no; \ else \ - if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \ - banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \ + echo "$@: invalid 'result_count' usage" >&2; exit 4; \ fi; \ - fi; \ - dashes="$$banner"; \ - skipped=""; \ - if test "$$skip" -ne 0; then \ - if test "$$skip" -eq 1; then \ - skipped="($$skip test was not run)"; \ + shift; \ + desc=$$1 count=$$2; \ + if test $$maybe_colorize = yes && test $$count -gt 0; then \ + color_start=$$3 color_end=$$std; \ else \ - skipped="($$skip tests were not run)"; \ + color_start= color_end=; \ fi; \ - test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ - dashes="$$skipped"; \ - fi; \ - report=""; \ - if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ - report="Please report to $(PACKAGE_BUGREPORT)"; \ - test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ - dashes="$$report"; \ - fi; \ - dashes=`echo "$$dashes" | sed s/./=/g`; \ - if test "$$failed" -eq 0; then \ - col="$$grn"; \ - else \ - col="$$red"; \ - fi; \ - echo "$${col}$$dashes$${std}"; \ - echo "$${col}$$banner$${std}"; \ - test -z "$$skipped" || echo "$${col}$$skipped$${std}"; \ - test -z "$$report" || echo "$${col}$$report$${std}"; \ - echo "$${col}$$dashes$${std}"; \ - test "$$failed" -eq 0; \ - else :; fi + echo "$${color_start}# $$desc $$count$${color_end}"; \ + }; \ + create_testsuite_report () \ + { \ + result_count $$1 "TOTAL:" $$all "$$brg"; \ + result_count $$1 "PASS: " $$pass "$$grn"; \ + result_count $$1 "SKIP: " $$skip "$$blu"; \ + result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ + result_count $$1 "FAIL: " $$fail "$$red"; \ + result_count $$1 "XPASS:" $$xpass "$$red"; \ + result_count $$1 "ERROR:" $$error "$$mgn"; \ + }; \ + { \ + echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ + $(am__rst_title); \ + create_testsuite_report --no-color; \ + echo; \ + echo ".. contents:: :depth: 2"; \ + echo; \ + for b in $$bases; do echo $$b; done \ + | $(am__create_global_log); \ + } >$(TEST_SUITE_LOG).tmp || exit 1; \ + mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ + if $$success; then \ + col="$$grn"; \ + else \ + col="$$red"; \ + test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ + fi; \ + echo "$${col}$$br$${std}"; \ + echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ + echo "$${col}$$br$${std}"; \ + create_testsuite_report --maybe-color; \ + echo "$$col$$br$$std"; \ + if $$success; then :; else \ + echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ + if test -n "$(PACKAGE_BUGREPORT)"; then \ + echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ + fi; \ + echo "$$col$$br$$std"; \ + fi; \ + $$success || exit 1 + +check-TESTS: + @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list + @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list + @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + @set +e; $(am__set_TESTS_bases); \ + log_list=`for i in $$bases; do echo $$i.log; done`; \ + trs_list=`for i in $$bases; do echo $$i.trs; done`; \ + log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \ + $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \ + exit $$?; +recheck: all + @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + @set +e; $(am__set_TESTS_bases); \ + bases=`for i in $$bases; do echo $$i; done \ + | $(am__list_recheck_tests)` || exit 1; \ + log_list=`for i in $$bases; do echo $$i.log; done`; \ + log_list=`echo $$log_list`; \ + $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ + am__force_recheck=am--force-recheck \ + TEST_LOGS="$$log_list"; \ + exit $$? +test-ifupdown.log: test-ifupdown$(EXEEXT) + @p='test-ifupdown$(EXEEXT)'; \ + b='test-ifupdown'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +.test.log: + @p='$<'; \ + $(am__set_b); \ + $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +@am__EXEEXT_TRUE@.test$(EXEEXT).log: +@am__EXEEXT_TRUE@ @p='$<'; \ +@am__EXEEXT_TRUE@ $(am__set_b); \ +@am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ +@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \ +@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ +@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT) distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ @@ -808,6 +1062,9 @@ install-strip: "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: + -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) + -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) + -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) clean-generic: @@ -903,7 +1160,7 @@ uninstall-am: installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags tags-am uninstall uninstall-am + recheck tags tags-am uninstall uninstall-am .PRECIOUS: Makefile |