Move from ati to mach64. Kill atifillin, probably needed for the loader

    with ati and atimisc, so a leftover of last commit.

1 files changed, 828 insertions, 0 deletions

diff --git a/README.mach64 b/README.mach64
new file mode 100644
index 0000000..7dddbee
--- /dev/null
+++ b/README.mach64
@@ -0,0 +1,828 @@
+  $Id$ Based on
+  XFree86: xc/programs/Xserver/hw/xfree86/doc/sgml/ati.sgml,v
+  3.42 2003/01/20 03:43:07 dawes Exp ATI Adapters README file
+  Marc Aurele La France
+  2002 February 12
+
+  This is the README for the XAA ATI driver included in this release.
+  ______________________________________________________________________
+
+  Table of Contents
+
+
+  1. Statement of intent
+  2. A note on acceleration
+  3. Current implementation for ATI adapters
+  4. Current implementation of generic VGA support for non-ATI adapters
+  5. xorg.conf specifications
+     5.1 Driver ``ati''
+     5.2 ChipSet ``name''
+     5.3 ChipID & ChipRev specifications
+     5.4 IOBase
+     5.5 BusID
+     5.6 Clocks
+        5.6.1 Clocks for supported programmable clock generators
+        5.6.2 Clocks for unsupported programmable clock generators
+        5.6.3 Clocks for fixed clock generators on ATI adapters
+        5.6.4 Clocks for non-ATI adapters
+     5.7 Option ``nopanel_display''
+     5.8 Option ``crt_display''
+     5.9 Option ``noaccel''
+     5.10 Option ``nolinear''
+     5.11 Option ``HWCursor'' and Option ``SWCursor''
+     5.12 Option ``SilkenMouse''
+     5.13 Option ``shadowfb''
+     5.14 Option ``dpms''
+     5.15 Option ``backingstore''
+     5.16 MemBase address
+     5.17 Option ``ReferenceClock'' ``frequency''
+     5.18 ClockChip ``name''
+
+  6. Video modes
+  7. Known problems and limitations
+  8. Reporting problems
+  9. Driver history
+  10. Driver versions
+
+
+  ______________________________________________________________________
+
+  1.  Statement of intent
+
+  Generally speaking, the driver is intended for all ATI video adapters,
+  providing maximum video function within hardware limitations.  The
+  driver is also intended to optionally provide the same level of
+  support for generic VGA or 8514/A adapters.  This driver is still
+  being actively developed, meaning that it currently does not yet fully
+  meet these goals.
+
+  The driver will provide
+
+  +o  accelerated support if an ATI accelerator is detected and the user
+     has not requested that this support be disabled;  otherwise
+
+  +o  accelerated support if a non-ATI 8514/A-capable adapter is detected
+     and the user has requested such support;  otherwise
+
+  +o  unaccelerated SuperVGA support if an ATI VGA-capable adapter is
+     detected; otherwise
+
+  +o  generic VGA support if a non-ATI VGA-capable adapter is detected
+     and the user has requested such support.
+
+     Thus, the level of support provided not only depends on what the
+     driver detects in the system, but also, on what the user specifies
+     in the xorg.conf file.  See the ``xorg.conf specifications''
+     section below for details.
+
+  If none of the above conditions are met, the ATI driver will
+  essentially disable itself to allow other drivers to examine the
+  system.
+
+  Note that I am currently considering removing the driver's support for
+  generic VGA.  If you have any concerns about this, please contact me
+  at <tsi@xfree86.org>.
+
+  2.  A note on acceleration
+
+  The meaning of ``acceleration'', as used in this document, needs to be
+  clarified.  Two of the many components in an accelerator are the CRT
+  controller (CRTC) and the Draw Engine.  This is in addition to another
+  CRTC that, generally, is also present in the system (often in the same
+  chip) and typically provides EGA, VGA or SuperVGA functionality.
+
+  A CRTC is the component of a graphics controller that is responsible
+  for reading video memory for output to the screen.  A Draw Engine is
+  an accelerator component that can be programmed to manipulate video
+  memory contents, thus freeing the CPU for other tasks.
+
+  When the VGA CRTC is used, all drawing operations into video memory
+  are the responsibility of the system's CPU, i.e. no Draw Engine can be
+  used.  On the other hand, if the accelerator's CRTC is chosen to drive
+  the screen, the Draw Engine can also be used for drawing operations,
+  although the CPU can still be used for this purpose if it can access
+  the accelerator's video memory.
+
+  Video acceleration refers to the programming of an accelerator's Draw
+  Engine to offload drawing operations from the CPU, and thus also
+  implies the use of the accelerator's CRTC.
+
+
+  3.  Current implementation for ATI adapters
+
+  The driver currently supports the SuperVGA capabilities of all ATI
+  adapters except some early Mach8 and Mach32 adapters that do not
+  provide the required functionality.  This support works for
+  monochrome, 16-colour and 256-colour video modes, if one of the
+  following ATI graphics controller chips is present:
+
+  VGAWonder series:  18800, 18800-1, 28800-2, 28800-4, 28800-5, 28800-6
+     Mach32 series:  68800-3, 68800-6, 68800AX, 68800LX
+     Mach64 series:  88800GX-C, 88800GX-D, 88800GX-E, 88800GX-F, 88800CX,
+                     264CT, 264ET, 264VT, 264GT (3D Rage), 264VT-B, 264VT3,
+                     264VT4, 264GT-B (3D Rage II), 3D Rage IIc, 3D Rage Pro,
+                     3D Rage LT, 3D Rage LT Pro, 3D Rage XL, 3D Rage XC,
+                     3D Rage Mobility (including the -M and -P variants)
+
+
+  The driver also supports 32K, 64K and 16M-colour modes on the 264xT
+  and 3D Rage series of adapters using the accelerator CRTC (but not the
+  VGA CRTC).
+
+
+  The newer Rage 128 and Radeon chips are not yet supported by this
+  driver.  Rage 128's and Radeon's are, however, supported by separate
+  drivers, and owners of such adapters should consult the documentation
+  provided with these drivers.  This driver will also invoke the
+  appropriate driver if it finds Rage 128 and/or Radeon adapter(s) in
+  the system.
+
+  Adapters based on the above chips have been marketed under a rather
+  large number of names over the years.  Among them are:
+
+  VGAWonder series:  VGAWonder V3, VGAWonder V4, VGAWonder V5, VGAWonder+,
+                     VGAWonder XL, VGAWonder XL24, VGAWonder VLB, VGA Basic,
+                     VGA Basic 16, VGA Edge, VGA Edge 16, VGA Integra,
+                     VGA Charger, VGAStereo F/X, VGA 640, VGA 800, VGA 1024,
+                     VGA 1024D, VGA 1024 XL, VGA 1024 DXL, VGA 1024 VLB
+      Mach8 series:  Graphics Ultra, Graphics Vantage, VGAWonder GT
+                     (None of the 8514/Ultra and 8514 Vantage series is
+                      supported at this time)
+     Mach32 series:  Graphics Ultra+, Graphics Ultra Pro, Graphics Wonder,
+                     Graphics Ultra XLR, Graphics Ultra AXO, VLB mach32-D,
+                     PCI mach32-D, ISA mach32
+     Mach64 series:  Graphics Xpression, Graphics Pro Turbo, WinBoost,
+                     WinTurbo, Graphics Pro Turbo 1600, Video Xpression,
+                     3D Xpression, Video Xpression+, 3D Xpression+,
+                     3D Charger, Video Charger, WinCharger, All-In-Wonder,
+                     All-In-Wonder PRO, 3D Pro Turbo, XPERT@Play,
+                     XPERT@Play 98, XPERT@Work, XPERT 98, XPERT LCD,
+                     XPERT XL
+
+
+  Also, a number of mainboards, laptops and notebooks harbour a Mach32
+  or Mach64 controller.
+
+  VGAWonder, Mach8 and Mach32 ISA adapters are available with or without
+  a mouse.
+
+  These adapters are available with a variety of clock generators and
+  RAMDACs.  The 264xT and 3D Rage series of chips are integrated
+  controllers, meaning that they include a programmable clock generator
+  and a RAMDAC.
+
+  For all but Mach64 adapters, this driver still does not provide
+  support for accelerated drawing to the screen.  This means that all
+  drawing is done by the CPU, rather than by any accelerator present in
+  the system.  This can make opaque moves, for example, quite ``jerky''.
+  Also, given that IBM 8514/A and ATI Mach8 do not allow CPU access to
+  their frame buffer, the driver will currently ignore these
+  accelerators.  Most Mach32 adapters provide both accelerated function
+  and SuperVGA functionality, but the driver currently only uses the
+  VGA.
+
+  The driver does however support the accelerator CRTC present in all
+  ATI Mach64 adapters.  For 256-colour, and higher depth modes, this
+  support will be used by default, although an xorg.conf option can be
+  specified to use the SuperVGA CRTC instead.  A linear video memory
+  aperture is also available in 256-colour and higher depth modes and
+  enabled by default if a 264xT or 3D Rage controller is detected or, on
+  88800 controllers, if the accelerator CRTC is used.  xorg.conf options
+  are available to disable this aperture, or (for non-PCI adapters)
+  enable it or move it to some other address.
+
+  By default, the driver provides some acceleration for Mach64 if the
+  accelerator CRTC is used, and modes whose colour depth greater than or
+  equal to 8 are to be used.  This support is as yet incomplete and can
+  be disabled entirely with an xorg.conf option.
+
+  On non-Intel platforms, the driver can, currently, only support PCI
+  Mach64 adapters.
+
+
+  4.  Current implementation of generic VGA support for non-ATI adapters
+
+  Support for generic VGA with non-ATI adapters is also implemented, but
+  has undergone only limited testing.  The driver will intentionally
+  disallow the use of this support with ATI adapters.  This support must
+  be explicitly requested through an xorg.conf ChipSet specification.
+  This prevents the current VGA generic driver from being disabled.
+
+  This driver's generic VGA support is intended as an extension of that
+  provided by the current generic driver.  Specifically, within the
+  architectural bounds defined by IBM's VGA standard, this driver will
+  allow the use of any 256-colour mode, and any dot clock frequencies
+  both of which allow for many more mode possibilities.
+
+  The driver will enforce the following limitations derived from IBM's
+  original VGA implementation:
+
+  +o  There can only be a set of four (non-programmable) clocks to choose
+     from.
+
+  +o  Video memory is limited to 256kB in monochrome and 16-colour modes.
+
+  +o  Video memory is limited to 64kB in 256-colour modes.
+
+  +o  Interlaced modes are not available.
+
+  +o  Colour depths higher than 8 are not available.
+
+  5.  xorg.conf specifications
+
+  The driver recognises a number of xorg.conf options.  In general, all
+  such options should be specified in a ``Device'' section, and affect
+  only that ``Device'' section.
+
+  Those options that affect how the driver associates adapters with
+  ``Device'' sections are described first.  The driver will ignore (with
+  a message) a ``Device'' section if the section cannot be associated
+  with exactly one adapter in the system.  Similarly, the driver will
+  ignore, or disable, (with a message) any adapter that cannot be
+  associated with exactly one ``Device'' section.  Thus, these options
+  will be required in those uncommon cases where such unique
+  associations cannot automatically be made by the driver.
+
+  Other options affect the driver's operation once an adapter has been
+  assigned to the ``Device'' section which contains them.
+
+
+  5.1.  Driver ``ati''
+
+  The use of this specification is highly recommended if the ``Device''
+  section is to be recognised by the driver.  In fact, it is almost (but
+  not quite) mandatory, particularly when using the loader server as it
+  indicates what driver is to be loaded and associated with the
+  ``Device'' section.
+
+
+  5.2.  ChipSet ``name''
+
+  The default ChipSet name for this driver is ``ati''.  In this case,
+  any ATI adapter can be associated with the ``Device'' section.  If an
+  ATI accelerator is detected and the driver supports it, the
+  accelerator's CRTC will be used to drive the screen.  Otherwise, the
+  driver will programme the adapter's SuperVGA CRTC.
+
+  If ``ativga'' is specified instead, the driver will ignore any ATI
+  accelerator it detects, but otherwise operate as if ``ati'' had been
+  specified.  This specification ensures the VGA CRTC is used.
+
+  A ChipSet name of ``ibmvga'' causes any VGA-capable adapter in the
+  system to be associated with the ``Device'' section.  It enables the
+  driver's generic VGA support, but only for non-ATI adapters.  If an
+  ATI adapter is associated with the ``Device'' section, the driver will
+  operate as if ``ativga'' had been specified instead.
+
+  A ChipSet name of ``vgawonder'' is equivalent to ``ativga'', except
+  that only VGAWonder-capable adapters can be assigned to the ``Device''
+  section.  This specifically excludes the newer integrated Mach64
+  controllers.
+
+  In some PCI or AGP systems, the driver will not, by default, probe for
+  non-PCI Mach32's or Mach64's.  This is because, before doing any such
+  probe, the driver attempts to determine if the probe can cause a
+  lockup.  If the driver has enough information to determine that a
+  lockup would occur, it will skip the probe.  In some situations, this
+  determination cannot be accurate, and the driver will err on the side
+  of caution, skipping the probe.  Specifying a ChipSet name of
+  ``mach32'' or ``mach64'', as appropriate, will force the driver to
+  probe for the non-PCI adapter.  These ChipSet names should, therefore,
+  only be used when there is in fact such an adapter in the system.
+  They are otherwise equivalent to ``ati''.
+
+  On non-Intel platforms, only ``ati'' and ``mach64'' ChipSet values are
+  operative.
+
+
+  5.3.  ChipID & ChipRev specifications
+
+  These specifications will cause the driver to associate the ``Device''
+  section only with an adapter having the same attributes, or an adapter
+  whose PCI device ID the driver does not recognise.  In the second
+  case, these options cause the driver to treat the adapter as if it was
+  one with the specified PCI device ID or revision.  ChipID can only be
+  used with Mach32 or Mach64 adapters, and, thus, specifically excludes
+  any other adapter from matching the ``Device'' section.  ChipRev is
+  meaningful only with Mach64 adapters, and then only if ChipID is also
+  specified in the same ``Device'' section.
+
+
+  5.4.  IOBase
+
+  This option limits the adapters that can be associated with the
+  ``Device'' section to the one with the specified I/O base.  This
+  option only applies to Mach64 adapters and specifically excludes other
+  adapters.
+
+
+  5.5.  BusID
+
+  This option limits the adapters that can be associated with the
+  ``Device'' section to the one with the specified PCI Bus ID.  This
+  specification excludes non-PCI adapters.
+
+
+  5.6.  Clocks
+
+  For the purpose of specifying a clock line in your xorg.conf, one of
+  four different situations can occur, as follows.
+
+  Those configuring the driver's generic VGA support for a non-ATI
+  adapter, can skip ahead to the ``Clocks for non-ATI adapters'' section
+  below.  Those not trying to configure the driver for a Mach64 adapter,
+  can skip ahead to the ``Clocks for fixed clock generators on ATI
+  adapters'' section below.
+
+  The very earliest Mach64 adapters use fixed (i.e. non-programmable)
+  clock generators.  Very few of these (mostly prototypes) are known to
+  exist, but if you have one of these, you can also skip ahead to the
+  ``Clocks for fixed clock generators on ATI adapters'' section below.
+
+  The two cases that are left deal with programmable clock generators,
+  which are used on the great majority of Mach64 adapters.
+
+  If you are uncertain which situation applies to your adapter, you can
+  run a clock probe with the command ``X -probeonly''.
+
+
+  5.6.1.  Clocks for supported programmable clock generators
+
+  At bootup, video BIOS initialisation programmes an initial set of
+  frequencies.  Two of these are reserved to allow the setting of modes
+  that do not use a frequency from this initial set.  One of these
+  reserved slots is used by the BIOS mode set routine, the other by the
+  particular driver used (e.g. MS-Windows, AutoCAD, X, etc.).  The clock
+  numbers reserved in this way are dependent on the particular clock
+  generator used by the adapter.
+
+  The driver currently supports all programmable clock generators known
+  to exist on Mach64 adapters.  In this case, the driver will completely
+  ignore any xorg.conf clock specification, and programme the clock
+  generator as needed by the modes used during the X session.
+
+
+  5.6.2.  Clocks for unsupported programmable clock generators
+
+  This case is unlikely to occur, but is documented for the sake of
+  completeness.
+
+  In this situation, the driver will probe the adapter for clock
+  frequencies unless xorg.conf clocks are already specified.  In either
+  case, the driver will then attempt to normalise the clocks to one of
+  the following specifications:
+
+  BIOS setting 1:
+
+    Clocks   0.000 110.000 126.000 135.000  50.350  56.640  63.000  72.000
+             0.000  80.000  75.000  65.000  40.000  44.900  49.500  50.000
+             0.000  55.000  63.000  67.500  25.180  28.320  31.500  36.000
+             0.000  40.000  37.500  32.500  20.000  22.450  24.750  25.000
+
+
+
+  BIOS setting 2:
+
+    Clocks   0.000 110.000 126.000 135.000  25.180  28.320  31.500  36.000
+             0.000  80.000  75.000  65.000  40.000  44.900  49.500  50.000
+             0.000  55.000  63.000  67.500  12.590  14.160  15.750  18.000
+             0.000  40.000  37.500  32.500  20.000  22.450  24.750  25.000
+
+
+
+  BIOS setting 3:
+
+    Clocks   0.000   0.000   0.000   0.000  25.180  28.320   0.000   0.000
+             0.000   0.000   0.000   0.000   0.000   0.000   0.000   0.000
+             0.000   0.000   0.000   0.000  12.590  14.160   0.000   0.000
+             0.000   0.000   0.000   0.000   0.000   0.000   0.000   0.000
+
+
+  If the driver matches the clocks to the third setting above, function-
+  ality will be extremely limited (assuming the driver works at all).
+
+
+  5.6.3.  Clocks for fixed clock generators on ATI adapters
+
+  This section applies to all VGAWonder and Mach32 adapters, and to
+  early Mach64 prototypes.
+
+  One of the following clocks specifications (or an initial subset
+  thereof) can be used depending on what the adapter uses to generate
+  dot clocks:
+
+  Crystals (VGA Wonder V3 and V4 adapters only):
+
+    Clocks  50.000  56.644   0.000  44.900  44.900  50.000   0.000  36.000
+            25.000  28.322   0.000  22.450  22.450  25.000   0.000  18.000
+            16.667  18.881   0.000  14.967  14.967  16.667   0.000  12.000
+            12.500  14.161   0.000  11.225  11.225  12.500   0.000   9.000
+
+
+
+  ATI 18810 clock generator:
+
+    Clocks  30.240  32.000  37.500  39.000  42.954  48.771   0.000  36.000
+            40.000   0.000  75.000  65.000  50.350  56.640   0.000  44.900
+            15.120  16.000  18.750  19.500  21.477  24.386   0.000  18.000
+            20.000   0.000  37.500  32.500  25.175  28.320   0.000  22.450
+            10.080  10.667  12.500  13.000  14.318  16.257   0.000  12.000
+            13.333   0.000  25.000  21.667  16.783  18.880   0.000  14.967
+             7.560   8.000   9.375   9.750  10.739  12.193   0.000   9.000
+            10.000   0.000  18.750  16.250  12.586  14.160   0.000  11.225
+
+
+
+  ATI 18811-0 and ATI 18812-0 clock generators:
+
+    Clocks  30.240  32.000 110.000  80.000  42.954  48.771  92.400  36.000
+            39.910  44.900  75.000  65.000  50.350  56.640   0.000  44.900
+            15.120  16.000  55.000  40.000  21.477  24.386  46.200  18.000
+            19.955  22.450  37.500  32.500  25.175  28.320   0.000  22.450
+            10.080  10.667  36.667  26.667  14.318  16.257  30.800  12.000
+            13.303  14.967  25.000  21.667  16.783  18.880   0.000  14.967
+             7.560   8.000  27.500  20.000  10.739  12.193  23.100   9.000
+             9.978  11.225  18.750  16.250  12.588  14.160   0.000  11.225
+
+
+
+  ATI 18811-1 and ATI 18811-2 clock generators:
+
+    Clocks 135.000  32.000 110.000  80.000 100.000 126.000  92.400  36.000
+            39.910  44.900  75.000  65.000  50.350  56.640   0.000  44.900
+            67.500  16.000  55.000  40.000  50.000  63.000  46.200  18.000
+            19.955  22.450  37.500  32.500  25.175  28.320   0.000  22.450
+            45.000  10.667  36.667  26.667  33.333  42.000  30.800  12.000
+            13.303  14.967  25.000  21.667  16.783  18.880   0.000  14.967
+            33.750   8.000  27.500  20.000  25.000  31.500  23.100   9.000
+             9.978  11.225  18.750  16.250  12.588  14.160   0.000  11.225
+
+
+
+  ICS 2494-AM clock generators (found on some Dell motherboards):
+
+    Clocks  75.000  77.500  80.000  90.000  25.175  28.322  31.500  36.000
+           100.000 110.000 126.000 135.000  40.000  44.900  50.000  65.000
+            37.500  38.750  40.000  45.000  12.588  14.161  15.750  18.000
+            50.000  55.000  63.000  67.500  20.000  22.450  25.000  32.500
+            25.000  25.833  26.667  30.000   8.392   9.441  10.500  12.000
+            33.333  36.667  42.000  45.000  13.333  14.767  16.667  21.667
+            18.750  19.375  20.000  22.500   6.294   7.081   7.875   9.000
+            25.000  27.500  31.500  33.750  10.000  11.225  12.500  16.250
+
+
+  VGAWonder VLB, VGA 1024 VLB, Mach32 and Mach64 owners should only
+  specify up to the first 32 frequencies.  Any more will be ignored.
+
+  Other clock generators that have been used on ATI adapters (which can
+  all be said to be clones of one of the above) might generate non-zero
+  frequencies for those that are zero above, or vice-versa.
+
+  The order of the clocks is very important, although the driver will
+  reorder the specified clocks if it deems it appropriate to do so.
+  Mach32 and Mach64 owners should note that this order is different than
+  what they would use for previous accelerated servers.
+
+
+  5.6.4.  Clocks for non-ATI adapters
+
+  If no clocks are specified in the xorg.conf, the driver will probe for
+  four clocks, the second of which will be assumed to be 28.322 MHz.
+  The first clock will typically be 25.175 MHz, but there are
+  exceptions.  You can include up to four clock frequencies in your
+  xorg.conf to specify the actual values used by the adapter.  Any more
+  will be ignored.
+
+
+  5.7.  Option ``nopanel_display''
+
+  This specification is only effective when the driver detects that the
+  adapter's BIOS has initialised both the digital flat panel and CRT
+  interfaces.  In such a situation, the driver will normally drive both
+  the panel and the CRT.  This specification causes the driver to
+  disable the digital flat panel and display the screen image on the CRT
+  instead, which could potentially allow for larger physical resolutions
+  than the panel can handle.
+
+
+  5.8.  Option ``crt_display''
+
+  This specification is only effective when the driver detects that the
+  adapter's BIOS has initialised the digital flat panel interface, but
+  has disabled the CRT interface.  In such a situation the driver will
+  normally drive only the panel.  This specification causes the driver
+  to instead display the same image on both the panel and the CRT.
+  5.9.  Option ``noaccel''
+
+  By default, the driver will accelerate draw operations if a Mach64
+  CRTC is used to drive the display.  As implemented in this driver,
+  acceleration does not require a linear video memory aperture.  This
+  option disables this acceleration.
+
+
+  5.10.  Option ``nolinear''
+
+  By default, the driver will enable a linear video memory aperture for
+  256-colour and higher depth modes if it is also using a Mach64
+  accelerator CRTC or an integrated Mach64 graphics chip.  This option
+  disables this linear aperture.
+
+  On non-Intel platforms, the driver requires a linear aperture and, so,
+  this option is ignored.
+
+
+  5.11.  Option ``HWCursor''  and Option ``SWCursor''
+
+  Option ``HWCursor'', which is the default, specifies that hardware
+  facilities are to be used to paint the mouse pointer on the screen.
+  Option ``SWCursor'' specifies that the mouse pointer is to be drawn by
+  software, which is much slower.  If both options are specified, option
+  ``SWCursor'' prevails.  Currently, these options are only acted upon
+  for 256-colour or higher depth modes, if a Mach64 accelerator CRTC, or
+  a Mach64 integrated controller is being used.  In all other
+  situations, a software cursor will be used, regardless of what these
+  options specify.
+
+
+  5.12.  Option ``SilkenMouse''
+
+  This option is only acted upon when a hardware cursor is being used.
+  It specifies that the cursor's position on the screen is to be updated
+  as quickly as possible when the mouse is moved.  This is the default
+  behaviour.  If this option is negated, the cursor may lag the mouse
+  when the X server is very busy.
+
+
+  5.13.  Option ``shadowfb''
+
+  If this option is enabled, the driver will cause the CPU to do each
+  drawing operation first into a shadow frame buffer in system virtual
+  memory and then copy the result into video memory.  If this option is
+  not active, the CPU will draw directly into video memory.  Enabling
+  this option is beneficial for those systems where reading from video
+  memory is, on average, slower than the corresponding read/modify/write
+  operation in system virtual memory.  This is normally the case for PCI
+  or AGP adapters, and, so, this option is enabled by default.  For
+  other bus types, the default behaviour is to disable this option.
+
+  Note that, due to various limitations, this option is forcibly
+  disabled when a linear video memory aperture is not enabled, when the
+  frame buffer depth is less than 8, or when acceleration is used.
+
+
+  5.14.  Option ``dpms''
+
+  This option enables the driver's support for VESA's Display Power
+  Management Specification.
+
+
+
+  5.15.  Option ``backingstore''
+
+  This is not specifically a driver option.  It is used to enable the
+  server's support for backing store, a mechanism by which pixel data
+  for occluded window regions is remembered by the server thereby
+  alleviating the need to send expose events to X clients when the data
+  needs to be redisplayed.
+
+
+  5.16.  MemBase address
+
+  This specification is only effective for non-PCI Mach64 adapters, and
+  is used to override the CPU address at which the adapter will map its
+  video memory.  Normally, for non-PCI adapters, this address is set by
+  a DOS install utility provided with the adapter.  The MemBase option
+  can also be used to enable the linear aperture in those cases where
+  ATI's utility was not, or can not be, used.
+
+  For PCI and AGP adapters, this address is determined at system bootup
+  according to the PCI Plug'n'Play specification which arbitrates the
+  resource requirements of most devices in the system.  This means the
+  driver can not easily change the linear aperture address.
+
+
+  5.17.  Option ``ReferenceClock''  ``frequency''
+
+  This option is only applicable to non-Intel platforms, where an
+  adapter BIOS is not available to the driver.  The option specifies the
+  reference frequency used by the adapter's clock generator.  The
+  default is 14.318 MHz, and other typical values are 28.636, or 29.5
+  MHz.
+
+
+  5.18.  ClockChip ``name''
+
+  This option is only applicable to non-Intel platforms, where an
+  adapter BIOS is not available to the driver, and the driver cannot
+  reliably determine whether the clock generator the adapter uses is a
+  variant of an ATI 18818 (a.k.a.  ICS 2595) or an unsupported clock
+  generator.  The only values that are acted upon are ``ATI 18818-0'' or
+  ``ATI 18818-1''.  From this specification, the driver derives a
+  reference divider of 43 or 46 (respectively) for use in clock
+  programming calculations.  The driver's default behaviour, in this
+  case, is to assume an unsupported clock generator, which means it will
+  treat it as a fixed-frequency clock generator, as described under the
+  heading ``Clocks for unsupported programmable clock generators''
+  above.
+
+
+  6.  Video modes
+
+  Mode timings can be derived from the information in X's doc
+  subdirectory.  However, it is no longer required to specify such
+  timings in an xorg.conf's ``Monitor'' section(s), if only standard
+  mode timings are to be used.  The server automatically inserts VESA
+  standard mode timings in every ``Monitor'' section, and these modes
+  will be checked first for mode constraints (monitor sync tolerances,
+  video memory size, etc.).
+
+  Furthermore, it is also no longer required to specify mode names in
+  ``Display'' subsections.  Should no mode names be specified (or those
+  specified do not yield a usable mode), the server will automatically
+  select as a default resolution the largest usable mode, whether or not
+  the chosen mode is specified in the corresponding ``Monitor'' section.
+
+
+  For a digital flat panel, any sync tolerances should be removed from
+  the corresponding ``Monitor'' section.  The driver will automatically
+  calculate these from the mode that is active on server entry.  The
+  driver also inserts timings for a mode called "Native panel mode" that
+  represents the panel's native resolution.
+
+
+  7.  Known problems and limitations
+
+  There are several known problems or limitations related to the ATI
+  driver.  They include:
+
+
+  +o  When using a Mach64's accelerator CRTC, the virtual resolution must
+     be less than 8192 pixels wide.  The VGA CRTC further limits the
+     virtual resolution width to less than 4096 pixels, or to less than
+     2048 pixels for adapters based on 18800-x's (with 256kB of memory)
+     and on Mach64 integrated controllers.  These are hardware limits
+     that cannot be circumvented.
+
+  +o  Virtual resolutions requiring more than 1MB of video memory (256kB
+     in the monochrome case) are not supported by the VGA CRTC on
+     88800GX and 88800CX adapters.  This is a hardware limit that cannot
+     be circumvented.
+
+  +o  Due to hardware limitations, doublescanned modes are not supported
+     by the accelerator CRTC in 88800GX, 88800CX, 264CT and 264ET
+     adapters.
+
+  +o  The ``VScan'' modeline parameter is only supported when using the
+     VGA CRTC.
+
+  +o  Interlaced modes are not supported on 18800-x and 28800-x adapters
+     when using a virtual resolution that is 2048 pixels or wider.  When
+     using a 18800-x with 256kB of video memory in 256-colour modes,
+     this limit is reduced to 1024.  This is yet another hardware
+     limitation that cannot be circumvented.
+
+  +o  Video memory banking does not work in monochrome and 16-colour
+     modes on 18800-x adapters.  This appears to be another hardware
+     limit, but this conclusion cannot be confirmed at this time.  The
+     driver's default behaviour in this case is to limit video memory to
+     256kB.
+
+  +o  Video memory corruption can still occur during mode switches on
+     18800-x adapters.  Symptoms of this problem include garbled fonts
+     on return to text mode, and various effects (snow, dashed lines,
+     etc) on initial entry into a graphics mode.  In the first case, the
+     workaround is to use some other means of restoring the text font.
+     On Linux, this can be accomplished with the kbd or svgalib
+     packages.  In the second case, xrefresh(1) will usually clean up
+     the image.  No complete solution to this problem is currently
+     known.  It appears this corruption occurs due to either video
+     memory bandwidth or RAMDAC limitations, and so the driver will
+     limit mode clocks to 40MHz.
+
+  +o  There is some controversy over what the maximum allowed clock
+     frequency should be on 264xT and 3D Rage adapters.  For now, clocks
+     will, by default, be limited to 80MHz, 135MHz, 170MHz, 200MHz or
+     230MHz, depending on the specific controller.  This limit can only
+     be increased (up to a driver-calculated absolute maximum) through
+     the DACSpeed specification in xorg.conf.  Be aware however that
+     doing so is untested and might damage the adapter.
+
+  +o  Except as in the previous items, clocks are limited to 80MHz on
+     most adapters, although many are capable of higher frequencies.
+     This will eventually be fixed in a future release.
+
+  +o  The use of a laptop's hot-keys to switch displays while this driver
+     is active can cause lockups and/or other woes, and is therefore not
+     recommended.  It is not currently possible to solve this problem.
+
+
+  +o  In situations where the driver is to simultaneously display on both
+     a panel and a CRT, the same image will be seen on both.  In
+     particular, this means the CRT must be able to synchronise with the
+     timings of the panel's native resolution.  This is quite evident
+     when the panel has ``odd-ball'' dimensions, such as 1400x1050, a
+     resolution not commonly possible on CRTs or projection equipment.
+
+     Also, the display of independent images on the panel and CRT is not
+     currently implemented, and might never be, pending resolution of
+     the previous item.
+
+
+     Support for the following will be added in a future release:
+
+  +o  Mach32's accelerator CRTC.  This support is the first step towards
+     accelerated support for Mach32's, Mach8's, 8514/A's and other
+     clones.
+
+  +o  Colour depth greater than 8 on non-integrated controllers, where
+     permitted by the hardware.
+
+  +o  Mach32, Mach8 and 8514/A Draw Engines.
+
+  +o  Hardware cursors where implemented by hardware.  This has already
+     been done for Mach64 integrated controllers.
+
+  +o  TVOut, i.e. the ability to use a television screen as a monitor.
+
+  +o  Motion Video, i.e. displaying an asynchronous data stream (TV
+     signal, DVD, etc.) in a window or full-screen.
+
+  +o  3D operations.
+
+  8.  Reporting problems
+
+  If you are experiencing problems that are not already recorded in this
+  document, first ensure that you have the latest current release of
+  this driver and the Xorg X server..  Check the server's log (usually
+  found in /var/log/Xorg.0.log) and ftp://ftp.freedesktop.org/pub/Xorg
+  if you are uncertain.
+
+  Secondly, please check Xorg's doc directory for additional
+  information.
+
+  Thirdly, a scan through the comp.windows.x.i386unix and
+  comp.os.linux.x newsgroups and the xorg mailing list using your
+  favourite archiving service can also prove useful in resolving
+  problems.
+
+  If you are still experiencing problems, you can send me non-HTMLised
+  e-mail at  <tsi@xfree86.org>.  Please be as specific as possible when
+  describing the problem(s), and include an unedited copy of the
+  server's log and the xorg.conf file used.
+
+
+  9.  Driver history
+
+  The complete history of the driver is rather cloudy.  The following is
+  more than likely to be incomplete and inaccurate.
+  Apparently, Per Lindqvist first got a driver working with an early ATI
+  adapter under X386 1.1a.  This original driver might have actually
+  been based on a non-functional ATI driver written by Thomas Roell
+  (currently of Xi Graphics).
+
+  Then Doug Evans added support for the ATI VGA Wonder XL, trying in the
+  process to make the driver work with all other ATI adapters available
+  at the time.
+
+  Rik Faith obtained the X11R4 driver from Doug Evans in the summer of
+  1992 and ported the code to the X386 part of X11R5.  This subsequently
+  became part of XFree86.
+
+  I (Marc Aurele La France) took over development and maintenance of the
+  driver in the fall of 1993 after Rik got rid of his VGA Wonder
+  adapter.
+
+
+  10.  Driver versions
+
+  Due to the introduction of loadable drivers in XFree86 4.0, it has
+  become necessary to track driver versions separately.  Driver releases
+  use the following version numbering scheme.
+
+  Version 1 of this driver is the one I inherited from Rik Faith.  This
+  is the version found in XFree86 2.0 and 2.1.
+
+  Version 2 is my first rewrite of this code which only ended up being a
+  partially unsuccessful attempt at generalising the driver for all VGA
+  Wonder, Mach32, and early Mach64 adapters.  Various releases of this
+  version of the driver can be found in XFree86 2.1.1, 3.1, 3.1.1 and
+  3.1.2.
+
+  Version 3 represents my second rewrite (although a rather lame one as
+  rewrites go).  Into version 3, I introduced clock programming for
+  Mach64 adapters and merged in the old ati_test debugging tool.  This
+  is the version found in XFree86 3.2, 3.3 and 3.3.1.
+
+  Version 4 is a rather major restructuring of version 3, which became
+  larger than I could comfortably handle in one source file.  This is
+  the version found in XFree86 3.3.2, 3.3.3, 3.3.3.1, 3.3.3.2, 3.3.4,
+  3.3.5 and 3.3.6.
+
+  Version 5 is an almost complete restructuring of version 4 to fit in
+  the newer driver API of XFree86 4.0 and later.
+
+  The introduction of version 6 is a first swipe at porting the driver
+  to non-Intel architectures.
+
+
+