| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This is a modified version of a patch we've been carry-ing in Fedora and
RHEL for years now. This patch automatically adds secondary GPUs to the
master as output sink / offload source making e.g. the use of
slave-outputs just work, with requiring the user to manually run
"xrandr --setprovideroutputsource" before he can hookup an external
monitor to his hybrid graphics laptop.
There is one problem with this patch, which is why it was not upstreamed
before. What to do when a secondary GPU gets detected really is a policy
decission (e.g. one may want to autobind PCI GPUs but not USB ones) and
as such should be under control of the Desktop Environment.
Unconditionally adding autobinding support to the xserver will result
in races between the DE dealing with the hotplug of a secondary GPU
and the server itself dealing with it.
However we've waited for years for any Desktop Environments to actually
start doing some sort of autoconfiguration of secondary GPUs and there
is still not a single DE dealing with this, so I believe that it is
time to upstream this now.
To avoid potential future problems if any DEs get support for doing
secondary GPU configuration themselves, the new autobind functionality
is made optional. Since no DEs currently support doing this themselves it
is enabled by default. When DEs grow support for doing this themselves
they can disable the servers autobinding through the servers cmdline or a
xorg.conf snippet.
Signed-off-by: Dave Airlie <airlied@gmail.com>
[hdegoede@redhat.com: Make configurable, fix with nvidia, submit upstream]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
---
Changes in v2:
-Make the default enabled instead of installing a xorg.conf
snippet which enables it unconditionally
Changes in v3:
-Handle GPUScreen autoconfig in randr/rrprovider.c, looking at
rrScrPriv->provider, rather then in hw/xfree86/modes/xf86Crtc.c
looking at xf86CrtcConfig->provider. This fixes the autoconfig not
working with the nvidia binary driver
|
|
This allows making the master screen's pixmap_dirty_list entries
explicitly reflect that we're now tracking the root window instead of
the screen pixmap, in order to allow Present page flipping on master
outputs while there are active slave outputs.
Define HAS_DIRTYTRACKING_DRAWABLE_SRC for drivers to check, but leave
HAS_DIRTYTRACKING_ROTATION defined as well to make things slightly
easier for drivers.
Reviewed-by: Adam Jackson <ajax@redhat.com>
|
|
Currently, RRCrtcPendingTransform returns false unless the
transformation matrix itself is changing. This makes RRCrtcSet skip
doing anything if the only thing that is changing is the transform
filter.
There's already a function for comparing RRTransformPtrs, so use that
instead.
Tested by running
xrandr --output DP-1 --mode 1920x1080 --rate 144 --scale 0.5x0.5 --filter nearest
follwed by
xrandr --output DP-1 --mode 1920x1080 --rate 144 --scale 0.5x0.5 --filter bilinear
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
|
|
This is a work in progress that builds Xvfb, Xephyr, Xwayland, Xnest,
and Xdmx so far. The outline of Xquartz/Xwin support is in tree, but
hasn't been built yet. The unit tests are also not done.
The intent is to build this as a complete replacement for the
autotools system, then eventually replace autotools. meson is faster
to generate the build, faster to run the bulid, shorter to write the
build files in, and less error-prone than autotools.
v2: Fix indentation nits, move version declaration to project(), use
existing meson_options for version-config.h's vendor name/web.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
This touches everything that ends up in the Xorg binary; the big missing
part is GLX since that's all generated code. Cuts about 14k from the
binary on amd64.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
|
|
xrandr --setprovideroutputsource <screen> <gpu screen>
Xorg: ../../../xserver/dix/dispatch.c:4018: AttachOutputGPU:
Assertion `new->isGPU' failed.
GPUScreen is not allowed to be sink output.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Reviewed-by: Adam Jackson <ajax@redhat.com>
|
|
The purpose of rrCheckPixmapBounding is to make sure that the
screen_pixmap is *large* enough for the slave-output which crtc is
being configured.
However until now rrCheckPixmapBounding would also shrink the
screen_pixmap in certain scenarios leading to various problems.
For example: Take a laptop with its internalscreen on a slave-output and
currently disabled and an external monitor at 1920x1080+0+0.
Now lets say that we want to drive the external monitor at its native
resolution of 2560x1440 and have the internal screen mirror the top left
part of the external monitor, so we run:
$ xrandr --output eDP --mode 1920x1080 --pos 0x0 --output HDMI \
--mode 2560x1440 --pos 0x0
Here xrandr utility first calls RRSetScreenSize to 2560x1440, then it
calls RRSetCrtc 1920x1080+0+0 on the eDP, since this is a slave output,
rrCheckPixmapBounding gets called and resizes the screen_pixmap to
1920x1080, undoing the RRSetScreenSize. Then RRSetCrtc 2560x1440+0+0
gets called on the HDMI, depending on crtc->transforms this will
either result in a BadValue error from ProcRRSetCrtcConfig; or
it will succeed, but the monitor ends up running at 2560x1440
while showing a 1920x1080 screen_pixmap + black borders on the right
and bottom. Neither of which is what we want.
This commit removes the troublesome shrinking behavior, fixing this.
Note:
1) One could argue that this will leave us with a too large screen_pixmap
in some cases, but rrCheckPixmapBounding only gets called for slave
outputs, so xrandr clients already must manually shrink the screen_pixmap
after disabling crtcs in normal setups.
2) An alternative approach would be to also call rrCheckPixmapBounding
on RRSetCrtc on normal (non-slave) outputs, but that would result in
2 unnecessary resizes of the screen_pixmap in the above example, which
seems undesirable.
Cc: Nikhil Mahale <nmahale@nvidia.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
|
|
The purpose of rrCheckPixmapBounding is to make sure that the
screen_pixmap is large enough for the slave-output which crtc is
being configured.
This should include crtc->x and crtc->y, otherwise the crtc might
still end up scanning out an area outside of the screen-pixmap.
For example: Take a laptop with an external monitor on a slave-output at
1920x1080+0+0 and its internal-screen at 3840x2160+1920+0 and in
gnome-settings-daemon move the external monitor to be on the ri ght of
the internal screen rather then on the left. First g-s-d will do a
RRSetScreenSize to 5760*2160 (which is a nop), then it calls RRSetCrtc
to move the slave output to 1920x1080+3840+0, since this is a slave
output, rrCheckPixmapBounding gets called, since the 2 crtcs now overlap
the code before this commit would shrinks the screen_pixmap to 3180*2160.
Then g-s-d calls RRSetCrtc to move the internal screen to 3180*2160+0+0.
And we end up with the slave-output configured to scan-out an area
which completely falls outside of the screen-pixmap (and end up with
a black display on the external monitor).
This commit fixes this by not substracting the x1 and y1 coordinates
of the union-ed region when determining the new screen_pixmap size.
Cc: Nikhil Mahale <nmahale@nvidia.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
|
|
Before this commit crtc_bounds() did not take reflection into account,
when using reflection with 0 / 180 degree rotation this was not an
issue because of the default in the switch-case doing the right thing.
But when using 90 / 270 degree rotation we would also end up in the
default which is wrong in this case. This would lead to the cursor
being constrained to a height x height area of the monitor.
This commit masks out the reflection bits for the switch-case,
making crtc_bounds return the correct bounds and fixing the
problematic cursor constraining.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
|
|
This is a preparation patch for adding prime hw-cursor support.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
|
|
Adds an output parameter to disable PRIME synchronization.
Output parameter is created when the user calls 'xrandr
--setprovideroutputsource <sink> <source>' to prevent polluting output
parameters of non-PRIME configurations.
Defaults to on, so if the user wants PRIME synchronization they don't need
to do anything.
If the user wishes to disable PRIME synchronization when they first set up
PRIME, they can run 'xrandr --output <output> --set "PRIME Synchronization"
0' after running 'xrandr --setprovideroutputsource <sink> <source>', but
before 'xrandr --auto'.
If the user wishes to enable or disable PRIME synchronization after PRIME has
already been set up, they can run 'xrandr --output <output> --set "PRIME
Synchronization" <0 or 1>' at any time, xrandr will trigger a modeset, which
will tear down and setup PRIME in the configuration they requested on CRTCs
associated with that output.
randrstr.h:
Add central definition of the output property name.
rrcrtc.c:
Add function rrGetPixmapSharingSyncProp() to query the status of the
output property.
Add function rrSetPixmapSharingSyncProp() to set the output property.
Add 'sync' parameter to rrSetupPixmapSharing(), which when false will
use single buffering even if the required ABI functions are supported.
Changes rrSetupPixmapSharing() to only report an error if falling back
to single buffering when the user requested synchronization.
Change RRCrtcSet() to use rrPixmapSharingSyncProp() to query the status
of the output property and feed it into rrSetupPixmapSharing() using
the 'sync' parameter.
rrprovider.c:
Add RR(Init/Fini)PrimeSyncProps(), functions to create and destroy the
PRIME synchronization output property.
Add a call to RRInitPrimeSyncProps() in
ProcRRSetProviderOutputSource(), such that the output property is
created when the user requests PRIME.
Add a call to RRFiniPrimeSyncProps() in RRProviderDestroy().
v1: Initial commit
v2: Unchanged
v3: Add /* TODO */ for handling different sources with different outputs
Make rrSetupPixmapSharing() set the output property to 0 if it has to fall
back, to avoid user confusion.
Make rr(Get)PixmapSharingSyncProp() check the current value if there isn't a
pending value
v4: Unchanged
v5: Unchanged
v6: Rebase onto ToT
v7: Unchanged
Signed-off-by: Alex Goins <agoins@nvidia.com>
|
|
Changes PRIME to use double buffering and synchronization if all required
driver functions are available.
rrcrtc.c:
Changes rrSetupPixmapSharing() to use double buffering and
synchronization in the case that all required driver functions are
available. Otherwise, falls back to unsynchronized single buffer.
Changes RRCrtcDetachScanoutPixmap() to properly clean up in the case of
double buffering.
Moves StopPixmapTracking() from rrDestroySharedPixmap() to
RRCrtcDetachScanoutPixmap().
Changes RRReplaceScanoutPixmap() to fail if we are using double buffering,
as it would need a second ppix parameter to function with double buffering,
and AFAICT no driver I've implemented double buffered source support in uses
RRReplaceScanoutPixmap().
randrstr.h:
Adds scanout_pixmap_back to struct _rrCrtc to facilitate PRIME
double buffering.
xf86Crtc.h:
Adds current_scanout_back to _xf86Crtc to facilitate detection
of changes to it in xf86RandR12CrtcSet().
xf86RandR12.c:
Changes xf86RandR12CrtcSet() to detect changes in
scanout_pixmap_back.
Adds scanout_pixmap_back to struct _rrCrtc to facilitate PRIME double
buffering.
v1: Initial commit
v2: Rename PresentTrackedFlippingPixmap to PresentSharedPixmap
v3: Refactor to accomodate moving (rr)StartFlippingPixmapTracking and
(rr)(Enable/Disable)SharedPixmapFlipping to rrScrPrivRec from ScreenRec
Add fallback if flipping funcs fail
v4: Detach scanout pixmap when destroying scanout_pixmap_back, to avoid
dangling pointers in some drivers
v5: Disable RRReplaceScanoutPixmap for double-buffered PRIME, it would need an
ABI change with support for 2 pixmaps if it were to be supported, but AFAICT
no driver that actually supports double-buffered PRIME uses it.
Refactor to use rrEnableSharedPixmapFlipping() as a substitute for
rrCrtcSetScanoutPixmap() in the flipping case.
Remove extraneous pSlaveScrPriv from DetachScanoutPixmap()
Remove extraneous protopix and pScrPriv from rrSetupPixmapSharing()
v6: Rebase onto ToT
v7: Unchanged
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
|
|
Adds typedefs for (*RRStartFlippingPixmapTrackingProcPtr),
(*RREnableSharedPixmapFlippingProcPtr),
and (*RRDisableSharedPixmapFlippingProcPtr) in randrstr.h.
Adds typedefs for (*PresentSharedPixmapProcPtr),
(*SharedPixmapNotifyDamageProcPtr),
(*RequestSharedPixmapNotifyDamageProcPtr), and
(*StopFlippingPixmapTrackingProcPtr) in scrnintstr.h.
Adds RR(Enable/Disable)SharedPixmapFlipping, and
RRStartFlippingPixmapTracking to rrScrnPrivRec.
Adds StopFlippingPixmapTracking, PresentSharedPixmap,
SharedPixmapNotifyDamage, and RequestSharedPixmapNotifyDamage to ScreenRec.
rrScrnPrivRec used for functions that use RandR-private data types, and
ScreenRec used for the rest.
RREnableSharedPixmapFlipping will allow the sink driver to setup for
flipping between two shared pixmaps.
RRDisableSharedPixmapFlipping will allow the sink driver to do teardown
associated with flipping between two shared pixmaps.
(RRStart/Stop)FlippingPixmapTracking are merely the double-buffered
equivalents of (Start/Stop)PixmapTracking, allowing the source driver to do
whatever setup and teardown necessary for presenting on the two shared
pixmaps.
PresentSharedPixmap is a function exposed by the source driver for the X
server or sink driver to call to request a present on a given shared
pixmap. This way, presents can be driven by the sink's vblank instead of a
timer or similar mechanism.
SharedPixmapNotifyDamage and RequestSharedPixmapNotifyDamage are OPTIONAL
(even for double-buffered PRIME) functions exposed by the sink driver and
the source driver, respectively. By calling
master->RequestSharedPixmapNotifyDamage(ppix), the sink driver can request
for the source driver to call slave->SharedPixmapNotifyDamage(ppix) in
response to damage on the master screen pixmap tracked by ppix.
v1: Initial commit
v2: Rename PresentTrackedFlippingPixmap to PresentSharedPixmap
Add SharedPixmapNotifyDamage / RequestSharedPixmapNotifyDamage
v3: Add RRCrtcPtr as a parameter to StartFlippingPixmapTracking
Move functions that use RandR-private data types to rrScrnPrivRec.
v4: Unchanged
v5: Add front and back parameters to RREnableSharedPixmapFlippingProcPtr
v6: Rebase onto ToT
v7: Unchanged
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
|
|
In prime configurations master's last set time may not be latest
and greatest, adjust it with slaves last set time, pick up greatest
one. Otherwise xserver may end with events which has
lastSetTime < lastConfigTime even if that's not
the case and confuse xrandr client.
[hdegoede: rebase on "xrandrprovider: Do not use separate lists for unbound /
source / offload slaves"]
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
A single provider can be both a offload and source slave at the same time,
the use of seperate lists breaks in this case e.g. :
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 0 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 0 name:modesetting
xrandr --setprovideroutputsource 1 0x7b
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 1 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 1 name:modesetting
xrandr --setprovideroffloadsink 1 0x7b
xrandr --listproviders
Providers: number : 3
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 2 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 2 name:modesetting
Provider 2: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 2 name:modesetting
Not good. The problem is that the provider with id 0x46 now is on both
the output_slave_list and the offload_slave_list of the master screen.
This commit fixes this by unifying all 3 lists into a single slaves list.
Note that this does change the struct _Screen definition, so this is an ABI
break. I do not expect any of the drivers to actually use the removed / changed
fields so a recompile should suffice.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
|
|
RRScreenSizeNotify() will update the connection information block, but
if this occurs during initialization before ConnectionInfo is even
initialized, this will lead to a crash.
Simply check for ConnectionInfo prior to update it to avoid the crash.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95337
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
|
|
This is an ABI break, in that we now pass NULL to a function that hasn't
accepted it before.
Alex Goins had a different patch for this but it wasn't symmetrical, it
freed something in a very different place than it allocated it, this
attempts to retain symmetry in the releasing of the backing bo.
v2: use a new toplevel API, though it still passes NULL to something
that wasn't expecting it.
v3: pass -1 instead of 0.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alex Goins <agoins at nvidia.com>
|
|
The other way around makes no sense.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
This was added in:
commit 312910b4e34215aaa50fc0c6092684d5878dc32f
Author: Chase Douglas <chase.douglas@canonical.com>
Date: Wed Apr 18 11:15:40 2012 -0700
Update currentTime in dispatch loop
Unfortunately this is equivalent to calling GetTimeInMillis() once per
request. In the absolute best case (as on Linux) you're only hitting the
vDSO; on other platforms that's a syscall. Either way it puts a pretty
hard ceiling on request throughput.
Instead, push the call down to the requests that need it; basically,
grab processing and event generation.
Cc: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
|
|
This lets clients know that the layout of the monitors on the screen
has changed so they can adapt appropriately.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
|
|
Make sure we account for slave CRTCs when building the monitor list,
since that's what rrxinerama uses to fake Xinerama geometry.
[ajax: Slightly more informative commit message.]
Bugzilla: https://bugs.freedesktop.org/92313
Reviewed-by: Dave Airlie <airlied@redhat.com>
|
|
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
|
|
Otherwise, we leave a dangling reference to the destroyed pixmap in the
master screen's pixmap_dirty_list.
Fixes regression from commit cf5d6414 ("randr: Factor out shared pixmap
destruction").
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
|
|
protopix is completely redundant with mscreenpix. Get rid of it.
We don't need rrScrPriv, so remove it.
[ajax: also squash an unused variable in RRCrtcDetachScanoutPixmap,
though it'll come back when the rest of this series lands]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
|
|
The old version of rrCreateSharedPixmap(), in addition to actually creating
a shared pixmap with scanout, also set up pixmap tracking on the source
driver.
I will be needing to create multiple shared pixmaps for PRIME double
buffering, so factor the part that does shared pixmap creation into its own
function, the new rrCreateSharedPixmap(). Rename the old
rrCreateSharedPixmap() to rrSetupPixmapSharing(), a function that
replicates the old functionality of rrCreateSharedPixmap() using the new
rrCreateSharedPixmap().
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
|
|
Shared pixmap destruction is done by unrefing the master pixmap twice: once
for the original reference, and once for the reference implicitly added by
PixmapShareToSlave. Then, unrefing the slave pixmap once.
When I add PRIME double buffering and synchronization, I will need to do
this in multiple places. To avoid duplication of code and comments
explaining it everywhere, factor it out into its own function and use that
in place of where it was before.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
|
|
We only set changes on the main protocol screen as, for example
in RRSetChanged() and RRTellChanged(), therefore we should follow
the same logic when reporting that an output changed in
RROutputChanged().
This means that RRTellChanged() will then update the relevant
timestamps also when events come from gpu screens.
[ajax: Fix mixed code and decls]
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alberto Milone <alberto.milone@canonical.com>
|
|
rrtransform.c:199:23: warning: shifting a negative signed value is undefined [-Wshift-negative-value,Semantic Issue]
rot_cos = F(-1);
^~~~~
rrtransform.c:114:14: note: expanded from macro 'F'
^~~~~~~~~~~~~~
../render/picture.h:200:24: note: expanded from macro 'IntToxFixed'
^~~~~~~~~~~~~~~~~~~~~~
/opt/X11/include/pixman-1/pixman.h:130:56: note: expanded from macro 'pixman_int_to_fixed'
~~~ ^
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
|
|
rrtransform.c:124:22: warning: using integer absolute value function 'abs' when
argument is of floating point type [-Wabsolute-value,Semantic Issue]
if ((v = abs(f_transform->m[j][i])) > max)
^
rrtransform.c:124:22: note: use function 'fabs' instead [Semantic Issue]
if ((v = abs(f_transform->m[j][i])) > max)
^~~
fabs
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
|
|
xorg/xserver/randr/rrmonitor.c:35:5: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘RRCrtc’ [-Werror=format=]
RRCrtc is XID is CARD32, which inside the server is unsigned long or int
depending on architecture, so a cast is required.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
|
|
[ajax: To be clear, we already have code to emit these events, and it
looks like it works, but to get them you'd have had to also ask for one
of the other notify types. This makes it possible to listen for e.g.
ProviderChange alone.]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michal Srb <msrb@suse.com>
|
|
As we define sizeFits based on whether a CRTC is active, and skip trying
to redirect the scanout on a disable pipe, we then attempt to undo it
later and fail because crtc->scanout_pixmap != DRI2_Pixmap and
!sizeFits. Paper over this failure by skipping unredirected CRTC when
disabling.
v2: Unwind upon failure
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84653
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Reported-by: Christoph Haag <haagch@frickel.club>
Tested-by: Christoph Haag <haagch@frickel.club>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
|
|
One of the lacking features with output offloading was
that screen rotation didn't work at all.
This patch makes 0/90/180/270 rotation work with USB output
and GPU outputs.
When it allocates the shared pixmap it allocates it rotated,
and any updates to the shared pixmap are done using a composite
path that does the rotation. The slave GPU then doesn't need
to know about the rotation and just displays the pixmap.
v2:
rewrite the sync dirty helper to use the dst pixmap, and
avoid any strange hobbits and rotations.
This breaks ABI in two places.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
|
|
|
|
This creates an automatic monitor for a tiled monitor at startup.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
v2: remove now useless parentheses
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
|
|
This replaces the CRTC-based Xinerama implementation with one which
uses Monitors instead, allowing clients to manipulate the Xinerama
configuration through the RandR Monitor list.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Store the user-defined monitors in the RandR screen private.
Generate a list of monitors from both the user-defined ones and from
any outputs not mentioned in one of the user-defined monitors. This list
covers both the outputs in the main screen as well as any slaves.
v1.1: airlied: fix up primary skipping bug,
fix wrong height initialiser
add get_active flag from updated protocol.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
In most of xserver code-base we define new functions at column 0, with
their return type provided on the previous line. Two functions did not
follow this rule so update them, and get them wrapped up to 80 as an
added bonus.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Also make use of total_name_len variable for consistency.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This will allow us to make the code more readable, and the lines will
fit within 80 columns.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To provide some information about the origin of the message.
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
All of these seem like left over from developments stage. Remove them as
they can cause excessive flood in the logs.
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Prevent RRXinerama from activating if PseudoramiX is, so we don't get XINERAMA
listed twice in the list of extensions. I think this is otherwise benign, as
the PseudoramiX XINERAMA gets registered first and thus handles all requests.
Perhaps AddExtension() ought to warn us if the extension name is already
registered?
This appears to be a long-standing bug seen in XQuartz, and now in XWin as well.
Future work: Perhaps since RRXinerama isn't actually doing anything useful but
faking it when we have one screen, it seems that the PseudoramiX code could be
also used in that case.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
|
|
If the user wants to set one of the slave devices as
the primary output, we shouldn't fail to do so,
we were returning BadMatch which was tripping up
gnome-settings-daemon and bad things ensues.
Fix all the places we use primaryOutput to work
out primaryCrtc and take it into a/c when slave
gpus are in use.
v2: review from Aaron, fix indent, unhide has_primary from
macro. I left the int vs Bool alone to be consistent with
code below, a future patch could fix both.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=88614
Signed-off-by: Carlos Sánchez de La Lama <csanchezdll@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
|
