diff options
Diffstat (limited to 'qt4/spec/Connection_Interface_Contact_Info.xml')
-rw-r--r-- | qt4/spec/Connection_Interface_Contact_Info.xml | 550 |
1 files changed, 550 insertions, 0 deletions
diff --git a/qt4/spec/Connection_Interface_Contact_Info.xml b/qt4/spec/Connection_Interface_Contact_Info.xml new file mode 100644 index 000000000..527d32522 --- /dev/null +++ b/qt4/spec/Connection_Interface_Contact_Info.xml @@ -0,0 +1,550 @@ +<?xml version="1.0" ?> +<node name="/Connection_Interface_Contact_Info" xmlns:tp="http://telepathy.freedesktop.org/wiki/DbusSpec#extensions-v0"> + <tp:copyright> Copyright (C) 2008 Collabora Limited </tp:copyright> + <tp:copyright> Copyright (C) 2008 Nokia Corporation </tp:copyright> + <tp:license xmlns="http://www.w3.org/1999/xhtml"> + <p>This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version.</p> + +<p>This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details.</p> + +<p>You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.</p> + </tp:license> + <interface name="org.freedesktop.Telepathy.Connection.Interface.ContactInfo"> + <tp:added version="0.19.4">(as stable API)</tp:added> + <tp:requires interface="org.freedesktop.Telepathy.Connection"/> + + <tp:struct name="Contact_Info_Field" array-name="Contact_Info_Field_List"> + <tp:member type="s" name="Field_Name"> + <tp:docstring> + The name of the field; this is the lowercased name of a vCard field. + For example, a field representing a contact's address would be named + "adr". + </tp:docstring> + </tp:member> + <tp:member type="as" name="Parameters"> + <tp:docstring xmlns="http://www.w3.org/1999/xhtml"> + <p>A list of vCard type parameters applicable to this field, with their + values. The type parameter names, and any values that are + case-insensitive in vCard, MUST be in lower case. For example, a + contact's preferred home address would have parameters + 'type=home' and 'type=pref'.</p> + + <tp:rationale> + The type parameter 'type' is likely to be the most common, but + there can be others, such as 'language=en'. + </tp:rationale> + + <p>Characters which are required to be escaped in vCard type + parameters should not be escaped in this list. For instance, + a field "X-FOO;SEMICOLON=\;:bar" in a vCard would become + ('x-foo', ['semicolon=;'], ['bar']) in this interface.</p> + + <tp:rationale> + This avoids Telepathy UIs having to understand the escaping and + unescaping rules for vCards. The type parameter name is not + allowed (by RFC 2425) to contain an '=' character, so no ambiguity + is introduced. + </tp:rationale> + </tp:docstring> + </tp:member> + <tp:member type="as" name="Field_Value"> + <tp:docstring xmlns="http://www.w3.org/1999/xhtml"> + <p>For unstructured vCard fields (such as 'fn', a formatted name + field), a single-element array containing the field's value.</p> + + <p>For structured fields (such as 'adr', an address field), an array + corresponding to the semicolon-separated elements of the field (with + empty strings for empty elements).</p> + + <p>A vCard field with multiple comma-separated values, such as + 'nickname', should be represented by several + <tp:type>Contact_Info_Field</tp:type>s.</p> + + <p>Characters which are required to be escaped in vCard values, such as + semi-colons and newlines, should not be escaped in this list (e.g. if + a value contains a newline, the data passed over D-Bus should + contain a literal newline character).</p> + + <tp:rationale> + An earlier draft of this interface split structured vCard fields + into multiple Telepathy-level fields; for example, 'n' became + 'family-name', 'given-name', etc. But under this representation, + omitting empty components leads to difficulty identifying where one + name ends and another begins. Consider the fields ['given-name', + 'honorific-suffixes', 'family-name', 'honorific-prefixes']: does + this represent two 'n' fields, or one with incorrect component + ordering? + </tp:rationale> + </tp:docstring> + </tp:member> + <tp:docstring xmlns="http://www.w3.org/1999/xhtml"> + <p>Represents one piece of information about a contact, as modelled by + a single vCard field. Of the fields defined in RFC 2426, common + examples include:</p> + + <dl> + <dt>fn</dt> + <dd>The contact's full name, formatted to their liking</dd> + + <dt>n</dt> + <dd>The contact's full name, divided into five parts: family name, + given name, additional names, honorific prefixes, and honorific + suffixes</dd> + + <dt>org</dt> + <dd>The contact's organisation, divided into the organization's name + possibly followed by one or more organizational unit names.</dd> + + <dt>adr</dt> + <dd>A street address for the contact, divided into seven components: + post office box, extended address, street address, locality (e.g., + city), region (e.g., state or province), the postal code, and the + country name.</dd> + + <dt>label</dt> + <dd>A free-form street address for the contact, formatted as a + single value (with embedded newlines where necessary) suitable for + printing on an address label</dd> + + <dt>tel</dt> + <dd>A telephone number for the contact.</dd> + + <dt>email</dt> + <dd>An email address for the contact.</dd> + </dl> + + <p>For example, the following vCard:</p> + + <pre> + BEGIN:vCard + VERSION:3.0 + FN:Wee Ninja + N;LANGUAGE=ja:Ninja;Wee;;;-san + ORG:Collabora, Ltd.;Management Division;Human Resources\; Company Policy Enforcement + ADR;TYPE=WORK,POSTAL,PARCEL:;;11 Kings Parade;Cambridge;Cambridgeshire + ;CB2 1SJ;UK + LABEL;TYPE=WORK,POSTAL,PARCEL:11 Kings Parade\nCambridge\nCambridgeshire\nUK\nCB2 1SJ + TEL;TYPE=VOICE,WORK:+44 1223 362967, +44 7700 900753 + EMAIL;TYPE=INTERNET,PREF:wee.ninja@collabora.co.uk + EMAIL;TYPE=INTERNET:wee.ninja@example.com + URL:http://www.thinkgeek.com/geektoys/plush/8823/ + NICKNAME:HR Ninja,Enforcement Ninja + END:vCard</pre> + + <p>would be represented by (in Python-like syntax):</p> + + <pre> +[ + ('fn', [], ['Wee Ninja']), + ('n', ['language=ja'], ['Ninja', 'Wee', '', '', '-san']), + ('org', [], ['Collabora, Ltd.', 'Management Division', + 'Human Resources; Company Policy Enforcement']), + ('adr', ['type=work','type=postal','type=parcel'], + ['','','11 Kings Parade','Cambridge', 'Cambridgeshire','CB2 1SJ','UK']), + ('label', ['type=work','type=postal','type=parcel'], + ['''11 Kings Parade + Cambridge + Cambridgeshire + UK + CB2 1SJ''']), + ('tel', ['type=voice','type=work'], ['+44 1223 362967']), + ('tel', ['type=voice','type=work'], ['+44 7700 900753']), + ('email', ['type=internet','type=pref'], ['wee.ninja@collabora.co.uk']), + ('email', ['type=internet'], ['wee.ninja@example.com']), + ('url', [], ['http://www.thinkgeek.com/geektoys/plush/8823/']), + ('nickname', [], ['HR Ninja']), + ('nickname', [], ['Enforcement Ninja']) +]</pre> + </tp:docstring> + </tp:struct> + + <tp:mapping name="Contact_Info_Map" array-name=""> + <tp:docstring>A dictionary whose keys are contact handles and whose + values are contact information..</tp:docstring> + <tp:member type="u" tp:type="Contact_Handle" name="Handle"/> + <tp:member type="a(sasas)" tp:type="Contact_Info_Field[]" + name="Contact_Info"/> + </tp:mapping> + + <signal name="ContactInfoChanged" tp:name-for-bindings="Contact_Info_Changed"> + <arg name="Contact" type="u" tp:type="Contact_Handle"> + <tp:docstring> + An integer handle for the contact whose info has changed. + </tp:docstring> + </arg> + <arg name="ContactInfo" type="a(sasas)" tp:type="Contact_Info_Field[]"> + <tp:docstring xmlns="http://www.w3.org/1999/xhtml"> + An array of fields representing information about this contact. + </tp:docstring> + </arg> + <tp:docstring> + Emitted when a contact's information has changed or been received for + the first time on this connection. + </tp:docstring> + </signal> + + <method name="GetContactInfo" + tp:name-for-bindings="Get_Contact_Info"> + <arg direction="in" name="Contacts" type="au" tp:type="Contact_Handle[]"> + <tp:docstring> + An array of handles representing contacts. + </tp:docstring> + </arg> + <arg direction="out" name="ContactInfo" type="a{ua(sasas)}" + tp:type="Contact_Info_Map"> + <tp:docstring> + A dictionary mapping contact handles to information, whose keys are + the subset of the requested list of handles for which information was + cached. + </tp:docstring> + </arg> + <tp:docstring> + Request information on several contacts at once. This SHOULD only + return cached information, omitting handles for which no information is + cached from the returned map. + </tp:docstring> + </method> + + <method name="RefreshContactInfo" + tp:name-for-bindings="Refresh_Contact_Info"> + <arg direction="in" name="Contacts" type="au" tp:type="Contact_Handle[]"> + <tp:docstring> + Integer handles for contacts. + </tp:docstring> + </arg> + <tp:docstring> + Retrieve information for the given contact, requesting it from the + network if an up-to-date version is not cached locally. This method + SHOULD return immediately, emitting + <tp:member-ref>ContactInfoChanged</tp:member-ref> when the contacts' + updated contact information is returned. + + <tp:rationale> + This method allows a client with cached contact information to + update its cache after a number of days. + </tp:rationale> + </tp:docstring> + <tp:possible-errors> + <tp:error name="org.freedesktop.Telepathy.Error.Disconnected"/> + <tp:error name="org.freedesktop.Telepathy.Error.InvalidHandle"/> + </tp:possible-errors> + </method> + + <method name="RequestContactInfo" + tp:name-for-bindings="Request_Contact_Info"> + <arg direction="in" name="Contact" type="u" tp:type="Contact_Handle"> + <tp:docstring> + An integer handle for a contact. + </tp:docstring> + </arg> + <arg direction="out" name="Contact_Info" type="a(sasas)" + tp:type="Contact_Info_Field[]"> + <tp:docstring> + Information about that contact. + </tp:docstring> + </arg> + <tp:docstring> + Retrieve information for a contact, requesting it from the network if + it is not cached locally. + + <tp:rationale> + This method is appropriate for an explicit user request to show + a contact's information; it allows a UI to wait for the contact + info to be returned. + </tp:rationale> + </tp:docstring> + <tp:possible-errors> + <tp:error name="org.freedesktop.Telepathy.Error.Disconnected"/> + <tp:error name="org.freedesktop.Telepathy.Error.NetworkError"/> + <tp:error name="org.freedesktop.Telepathy.Error.InvalidHandle"/> + <tp:error name="org.freedesktop.Telepathy.Error.NotAvailable"> + <tp:docstring> + The contact's information could not be retrieved. + </tp:docstring> + </tp:error> + </tp:possible-errors> + </method> + + <method name="SetContactInfo" tp:name-for-bindings="Set_Contact_Info"> + <tp:docstring> + Set new contact information for this connection, replacing existing + information. This method is only suppported if + <tp:member-ref>ContactInfoFlags</tp:member-ref> contains + <code>Can_Set</code>, and may only be passed fields conforming to + <tp:member-ref>SupportedFields</tp:member-ref>. + </tp:docstring> + <arg direction="in" name="ContactInfo" type="a(sasas)" + tp:type="Contact_Info_Field[]"> + <tp:docstring> + The new information to be set. + </tp:docstring> + </arg> + <tp:possible-errors> + <tp:error name="org.freedesktop.Telepathy.Error.Disconnected"/> + <tp:error name="org.freedesktop.Telepathy.Error.NetworkError"/> + <tp:error name="org.freedesktop.Telepathy.Error.PermissionDenied"/> + <tp:error name="org.freedesktop.Telepathy.Error.NotAvailable"/> + <tp:error name="org.freedesktop.Telepathy.Error.NotImplemented"> + <tp:docstring> + Setting your own information is not supported on this protocol. + </tp:docstring> + </tp:error> + <tp:error name="org.freedesktop.Telepathy.Error.InvalidArgument"> + <tp:docstring> + The supplied fields do not match the restrictions specified by + <tp:member-ref>SupportedFields</tp:member-ref>. + </tp:docstring> + </tp:error> + </tp:possible-errors> + </method> + + <tp:flags name="Contact_Info_Flags" value-prefix="Contact_Info_Flag" + type="u"> + <tp:docstring> + Flags defining the behaviour of contact information on this protocol. + Some protocols provide no information on contacts without an explicit + request; others always push information to the connection manager as + and when it changes. + </tp:docstring> + + <tp:flag suffix="Can_Set" value="1"> + <tp:docstring> + Indicates that <tp:member-ref>SetContactInfo</tp:member-ref> is + supported on this connection. + </tp:docstring> + </tp:flag> + + <tp:flag suffix="Push" value="2"> + <tp:docstring> + Indicates that the protocol pushes all contacts' information to the + connection manager without prompting. If set, + <tp:member-ref>ContactInfoChanged</tp:member-ref> will be emitted + whenever contacts' information changes. + </tp:docstring> + </tp:flag> + </tp:flags> + + <tp:simple-type name="VCard_Field" type="s"> + <tp:docstring> + A string naming a field in a vCard, such as "fn" or "adr". Although + these are case-insensitive in RFC 2425, in Telepathy they MUST be + normalized to lower case. In the terminology of RFC 2425 this is + called a "type name", and corresponds to the "name" production given + in the ABNF. + </tp:docstring> + </tp:simple-type> + + <tp:simple-type name="VCard_Type_Parameter" type="s" + array-name="VCard_Type_Parameter_List"> + <tp:docstring> + A type parameter as defined by RFC 2426, such as "type=cell" or + "language=en". + </tp:docstring> + </tp:simple-type> + + <property name="ContactInfoFlags" type="u" access="read" + tp:type="Contact_Info_Flags" tp:name-for-bindings="Contact_Info_Flags"> + <tp:docstring xmlns="http://www.w3.org/1999/xhtml"> + <p>An integer representing the bitwise-OR of flags on this + connection.</p> + + <p>This property MAY change, without change notification, at any time + before the connection moves to status Connection_Status_Connected. + It MUST NOT change after that point.</p> + + <tp:rationale> + <p>Some XMPP servers, like Facebook Chat, do not allow the vCard to + be changed (and so would not have the Can_Set flag). Whether the + user's server is one of these cannot necessarily be detected until + quite late in the connection process.</p> + </tp:rationale> + + </tp:docstring> + </property> + + <tp:struct name="Field_Spec" array-name="Field_Specs"> + <tp:docstring>A struct describing a vCard field, with parameters, that + may be passed to <tp:member-ref>SetContactInfo</tp:member-ref> on this + Connection.</tp:docstring> + + <tp:member type="s" name="Name" tp:type="VCard_Field"> + <tp:docstring>A vCard field name, such as 'tel'.</tp:docstring> + </tp:member> + + <tp:member type="as" name="Parameters" tp:type="VCard_Type_Parameter[]"> + <tp:docstring>The set of vCard type parameters which may be set on this + field. If this list is empty and the + Contact_Info_Field_Flag_Parameters_Exact flag is not set, any vCard type + parameters may be used.</tp:docstring> + </tp:member> + + <tp:member type="u" name="Flags" tp:type="Contact_Info_Field_Flags"> + <tp:docstring>Flags describing the behaviour of this + field.</tp:docstring> + </tp:member> + + <tp:member type="u" name="Max"> + <tp:docstring>Maximum number of instances of this field which may be + set. MAXUINT32 is used to indicate that there is no + limit.</tp:docstring> + </tp:member> + </tp:struct> + + <property name="SupportedFields" type="a(sasuu)" tp:type="Field_Spec[]" + access="read" tp:name-for-bindings="Supported_Fields"> + <tp:docstring xmlns="http://www.w3.org/1999/xhtml"> + <p>A list of field specifications describing the kinds of fields which may + be passed to <tp:member-ref>SetContactInfo</tp:member-ref>. The empty + list indicates that arbitrary vCard fields are permitted. This + property SHOULD be the empty list, and be ignored by clients, if + <tp:member-ref>ContactInfoFlags</tp:member-ref> does not contain the + Can_Set flag.</p> + + <p>For example, a protocol in which arbitrary vCards were stored + as-is would set this property to the + empty list. A protocol whose notion of contact information is one + each of personal phone number, mobile phone number, location, email + address and date of birth, with no attributes allowed on each piece + of information, would set this property to (in Python-like + syntax):</p> + + <pre> +[ + ('tel', ['type=home'], Parameters_Exact, 1), + ('tel', ['type=cell'], Parameters_Exact, 1), + ('adr', [], Parameters_Exact, 1), + ('bday', [], Parameters_Exact, 1), + ('email', ['type=internet'], Parameters_Exact, 1), +]</pre> + + <p>A protocol which allows users to specify up to four phone numbers, + which may be labelled as personal and/or mobile, would set this + property to + <code>[ ('tel', ['type=home', 'type=cell'], 0, 4), ]</code>.</p> + + <tp:rationale> + <p>Studying existing IM protocols shows that in practice protocols + allow either a very restricted set of fields (such as MSN, which + seems to correspond roughly to the largest example above), or + something mapping 1:1 to a large subset of vCard (such as XMPP's + XEP-0054).</p> + </tp:rationale> + + <p>This property MAY change, without change notification, at any time + before the connection moves to status Connection_Status_Connected. + It MUST NOT change after that point.</p> + + <tp:rationale> + <p>Some XMPP servers, like Google Talk, only allow a small subset of + the "vcard-temp" protocol. Whether the user's server is one of + these cannot be detected until quite late in the connection + process.</p> + </tp:rationale> + </tp:docstring> + </property> + + <tp:flags name="Contact_Info_Field_Flags" + value-prefix="Contact_Info_Field_Flag" type="u"> + <tp:docstring xmlns="http://www.w3.org/1999/xhtml"> + Flags describing the behaviour of a vCard field. + </tp:docstring> + <tp:flag suffix="Parameters_Exact" value="1"> + <tp:docstring xmlns="http://www.w3.org/1999/xhtml"> + <p>If present, exactly the parameters indicated must be set on this + field; in the case of an empty list of parameters, this implies that + parameters may not be used.</p> + + <p>If absent, and the list of allowed parameters is non-empty, + any (possibly empty) subset of that list may be + used.</p> + + <p>If absent, and the list of allowed parameters is empty, + any parameters may be used.</p> + </tp:docstring> + </tp:flag> + + <tp:flag suffix="Overwritten_By_Nickname" value="2"> + <tp:docstring xmlns="http://www.w3.org/1999/xhtml"> + <p>Indicates that this field will be overwritten when the user's alias + is changed with <tp:dbus-ref + namespace="ofdT.Connection.Interface.Aliasing">SetAliases</tp:dbus-ref> + or when the Account's <tp:dbus-ref + namespace="ofdT.Account">Nickname</tp:dbus-ref> + is updated. Clients that allow the editing of the Alias and the + ContactInfo in the same location should hide fields with this flag.</p> + <tp:rationale> + <p>If a client allowed the user to edit both the nickname and the + ContactInfo field at the same time, the user could set them to two + different values even though they map to the same property. This + would result in surprising behavior where the second value would + win over the first.</p> + </tp:rationale> + <p>In addition to hiding this field when editing ContactInfo together + with the user's nickname, it is recommended that clients call + <tp:member-ref>SetContactInfo</tp:member-ref> before setting the + user's nickname.</p> + <tp:rationale> + <p>This ensures that if the user changes the nickname, the correct + value will get set even if the stale nickname is mistakenly sent + along with <tp:member-ref>SetContactInfo</tp:member-ref>.</p> + </tp:rationale> + <p>If used, this flag typically appears on either the 'nickname' or + 'fn' field.</p> + </tp:docstring> + </tp:flag> + </tp:flags> + + <tp:docstring xmlns="http://www.w3.org/1999/xhtml"> + <p>An interface for requesting information about a contact on a given + connection. Information is represented as a list of + <tp:type>Contact_Info_Field</tp:type>s forming a + structured representation of a vCard (as defined by RFC 2426), using + field names and semantics defined therein.</p> + + <p>On some protocols, information about your contacts is pushed to you, + with change notification; on others, like XMPP, the client must + explicitly request the avatar, and has no way to tell whether it has + changed without retrieving it in its entirety. This distinction is + exposed by <tp:member-ref>ContactInfoFlags</tp:member-ref> containing + the Push flag.</p> + + <p>On protocols with the Push flag set, UIs can connect to + <tp:member-ref>ContactInfoChanged</tp:member-ref>, call + <tp:member-ref>GetContactInfo</tp:member-ref> once at login for the set + of contacts they are interested in, and then be sure they will receive + the latest contact info. On protocols like XMPP, clients can do the + same, but will receive (at most) opportunistic updates if the info is + retrieved for other reasons. Clients may call + <tp:member-ref>RequestContactInfo</tp:member-ref> or + <tp:member-ref>RefreshContactInfo</tp:member-ref> to force a contact's + info to be updated, but MUST NOT do so unless this is either in + response to direct user action, or to refresh their own cache after a + number of days.</p> + + <tp:rationale> + <p>We don't want clients to accidentally cause a ridiculous amount of + network traffic.</p> + </tp:rationale> + </tp:docstring> + + <tp:contact-attribute name="info" + type="a(sasas)" tp:type="Contact_Info_Field[]"> + <tp:docstring xmlns="http://www.w3.org/1999/xhtml"> + <p>The same value that would be returned by + <tp:member-ref>GetContactInfo</tp:member-ref> for this contact. + Omitted from the result if the contact's info + is not known.</p> + </tp:docstring> + </tp:contact-attribute> + + </interface> +</node> +<!-- vim:set sw=2 sts=2 et ft=xml: --> |