summaryrefslogtreecommitdiff
path: root/hmp-commands.hx
AgeCommit message (Collapse)AuthorFilesLines
2018-12-11Deprecate HMP `cpu-add`Kashyap Chamarthy1-2/+4
Since we're deprecating the QMP `cpu-add`, let's deprecate its HMP equivalent, too. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com> Message-Id: <20181030123526.26415-3-kchamart@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-08-23hmp-commands: add sync-profileEmilio G. Cota1-0/+15
The command introduced here is just for developers. This means that: - the interface implemented here could change in the future - the command is only meant to be used from HMP, not from QMP Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-15block: Remove deprecated -drive geometry optionsKevin Wolf1-1/+0
This reinstates commit a7aff6dd10b16b67e8b142d0c94c5d92c3fe88f6, which was temporarily reverted for the 3.0 release so that libvirt gets some extra time to update their command lines. The -drive options cyls, heads, secs and trans were deprecated in QEMU 2.10. It's time to remove them. hd-geo-test tested both the old version with geometry options in -drive and the new one with -device. Therefore the code using -drive doesn't have to be replaced there, we just need to remove the -drive test cases. This in turn allows some simplification of the code. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-07-10Revert "block: Remove deprecated -drive geometry options"Cornelia Huck1-0/+1
This reverts commit a7aff6dd10b16b67e8b142d0c94c5d92c3fe88f6. Hold off removing this for one more QEMU release (current libvirt release still uses it.) Signed-off-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-29dump: add Windows dump format to dump-guest-memoryViktor Prutyanov1-5/+8
This patch adds Windows crashdumping feature. Now QEMU can produce ELF-dump containing Windows crashdump header, which can help to convert to a valid WinDbg-understandable crashdump file, or immediately create such file. The crashdump will be obtained by joining physical memory dump and 8K header exposed through vmcoreinfo/fw_cfg device by guest driver at BSOD time. Option '-w' was added to dump-guest-memory command. At the moment, only x64 configuration is supported. Suitable driver can be found at https://github.com/virtio-win/kvm-guest-drivers-windows/tree/master/fwcfg64 Signed-off-by: Viktor Prutyanov <viktor.prutyanov@virtuozzo.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180517162342.4330-2-viktor.prutyanov@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-21hmp: add exit_preconfigDr. David Alan Gilbert1-0/+19
Add the exit_preconfig command to return to normality. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20180620153947.30834-7-dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-06-21hmp: Add commands for preconfigDr. David Alan Gilbert1-0/+3
Allow a bunch of the info commands to be used in preconfig. version, chardev, name, uuid,memdev, iothreads Were enabled in QMP in the previous patch from Igor status, hotpluggable_cpus Was enabled in the original allow-preconfig series history is HMP specific qom-tree Don't have a QMP equivalent Also enable the qom commands qom-list and qom-set. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20180620153947.30834-6-dgilbert@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Dropped info numa as per Igor's 2018-06-21 review
2018-06-21hmp: Allow help on preconfig commandsDr. David Alan Gilbert1-0/+1
Allow the 'help' command in preconfig state but make it only list the preconfig commands. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20180620153947.30834-3-dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-06-21hmp-commands: use long for begin and length in dump-guest-memorySuraj Jitindar Singh1-1/+1
The dump-guest-memory command is used to dump an area of guest memory to a file, the piece of memory is specified by a begin address and a length. These parameters are specified as ints and thus have a maximum value of 4GB. This means you can't dump the guest memory past the first 4GB and instead get: (qemu) dump-guest-memory tmp 0x100000000 0x100000000 'dump-guest-memory' has failed: integer is for 32-bit values Try "help dump-guest-memory" for more information This limitation is imposed in monitor_parse_arguments() since they are both ints. hmp_dump_guest_memory() uses 64 bit quantities to store both the begin and length values. Thus specify begin and length as long so that the entire guest memory space can be dumped. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20180620003202.10546-1-sjitindarsingh@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-06-15block: Remove deprecated -drive geometry optionsKevin Wolf1-1/+0
The -drive options cyls, heads, secs and trans were deprecated in QEMU 2.10. It's time to remove them. hd-geo-test tested both the old version with geometry options in -drive and the new one with -device. Therefore the code using -drive doesn't have to be replaced there, we just need to remove the -drive test cases. This in turn allows some simplification of the code. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-05-15migration/hmp: add migrate_pause commandPeter Xu1-0/+14
Wrapper for QMP command "migrate-pause". Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180502104740.12123-25-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-05-15hmp/migration: add migrate_recover commandPeter Xu1-0/+13
Sister command to migrate-recover in QMP. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180502104740.12123-22-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-05-15qmp: hmp: add migrate "resume" optionPeter Xu1-3/+4
It will be used when we want to resume one paused migration. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180502104740.12123-8-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> --- s/2.12/2.13/
2018-05-15hmp: Allow using a qdev id in block_set_io_throttleAlberto Garcia1-1/+2
The QMP version of this command can take a qdev ID since 7a9877a02635, but the HMP version is still using the deprecated block device name so there's no way to refer to a block device added like this: -blockdev node-name=disk0,driver=qcow2,file.driver=file,file.filename=hd.qcow2 -device virtio-blk-pci,id=virtio-blk-pci0,drive=disk0 This patch works around this problem by using the specified name as a qdev ID if the block device name is not found. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-19block/mirror: change the semantic of 'force' of block-job-cancelLiang Li1-1/+2
When doing drive mirror to a low speed shared storage, if there was heavy BLK IO write workload in VM after the 'ready' event, drive mirror block job can't be canceled immediately, it would keep running until the heavy BLK IO workload stopped in the VM. Libvirt depends on the current block-job-cancel semantics, which is that when used without a flag after the 'ready' event, the command blocks until data is in sync. However, these semantics are awkward in other situations, for example, people may use drive mirror for realtime backups while still wanting to use block live migration. Libvirt cannot start a block live migration while another drive mirror is in progress, but the user would rather abandon the backup attempt as broken and proceed with the live migration than be stuck waiting for the current drive mirror backup to finish. The drive-mirror command already includes a 'force' flag, which libvirt does not use, although it documented the flag as only being useful to quit a job which is paused. However, since quitting a paused job has the same effect as abandoning a backup in a non-paused job (namely, the destination file is not in sync, and the command completes immediately), we can just improve the documentation to make the force flag obviously useful. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Jeff Cody <jcody@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: John Snow <jsnow@redhat.com> Reported-by: Huaitong Han <huanhuaitong@didichuxing.com> Signed-off-by: Huaitong Han <huanhuaitong@didichuxing.com> Signed-off-by: Liang Li <liliangleo@didichuxing.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-12qapi: Add device ID and head parameters to screendumpThomas Huth1-3/+4
QEMU's screendump command can only take dumps from the primary display. When using multiple VGA cards, there is no way to get a dump from a secondary card or other display heads yet. So let's add a 'device' and a 'head' parameter to the HMP and QMP commands to be able to specify alternative devices and heads with the screendump command, too. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1520267868-31778-1-git-send-email-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-03-05net: Remove the deprecated 'host_net_add' and 'host_net_remove' HMP commandsThomas Huth1-30/+0
They are deprecated since QEMU v2.10, and so far nobody complained that these commands are still necessary for any reason - and since you can use 'netdev_add' and 'netdev_remove' instead, there also should not be any real reason. Since they are also standing in the way for the upcoming 'vlan' clean-up, it's now time to remove them. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-02-14migration: improve documentation of postcopy-ramGreg Kurz1-1/+2
This capability must have the same value on both source and destination, otherwise migration fails (commit 875fcd013ab6 "migration: incoming postcopy advise sanity checks"). Let's write it down in various places where postcopy-ram is documented. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <151801810352.29167.4832480228518630626.stgit@bahia.lan> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-01-29Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell1-2/+2
staging # gpg: Signature made Mon 29 Jan 2018 08:14:19 GMT # gpg: using RSA key 0xEF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: MAINTAINERS: update Dmitry Fleytman email qemu-doc: Get rid of "vlan=X" example in the documentation net: Allow netdevs to be used with 'hostfwd_add' and 'hostfwd_remove' net: Allow hubports to connect to other netdevs colo: compare the packet based on the tcp sequence number colo: modified the payload compare function Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-29net: Allow netdevs to be used with 'hostfwd_add' and 'hostfwd_remove'Thomas Huth1-2/+2
It does not make much sense to limit these commands to the legacy 'vlan' concept only, they should work with the modern netdevs, too. So now it is possible to use this command with one, two or three parameters. With one parameter, the command installs a hostfwd rule on the default "user" network: hostfwd_add tcp:... With two parameters, the command installs a hostfwd rule on a netdev (that's the new way of using this command): hostfwd_add netdev_id tcp:... With three parameters, the command installs a rule on a 'vlan' (aka hub): hostfwd_add hub_id name tcp:... Same applies to the hostfwd_remove command now. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-01-26hmp: Add nbd_server_remove to mirror QMP commandEric Blake1-0/+17
Since everything else about the nbd-server-* QMP commands is accessible from HMP, we might as well make removing an export available as well. For now, I went with a bool flag rather than a mode string for choosing between safe (default) and hard modes. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20180125144557.25502-1-eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2018-01-26hmp: Add name parameter to nbd_server_addEric Blake1-4/+5
Extend the flexibility of the previous QMP patch to also work in HMP. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20180109192802.17167-1-eblake@redhat.com>
2017-12-14hmp-commands: Remove the deprecated usb_add and usb_delThomas Huth1-33/+0
It's easy to use device_add and device_del as replacement instead. The usb_add and usb_del commands are deprecated since QEMU 2.10, and nobody complained that they are still needed, so let's get rid of them now to make the HMP interface a little bit less overloaded. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1512073140-17672-1-git-send-email-thuth@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-10-23migrate: HMP migate_continueDr. David Alan Gilbert1-0/+12
HMP equivalent to the just added migrate-continue Unpause a migrate paused at a given state. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-07-14Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20170714' into ↵Peter Maydell1-0/+16
staging s390x/kvm/migration/cpumodel: fixes, enhancements and cleanups - add a network boot rom for s390 (Thomas Huth) - migration of storage attributes like the CMMA used/unused state - PCI related enhancements - full support for aen, ais and zpci - migration support for css with vmstates (Halil Pasic) - cpu model enhancements for cpu features - guarded storage support # gpg: Signature made Fri 14 Jul 2017 11:33:04 BST # gpg: using RSA key 0x117BBC80B5A61C7C # gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>" # Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C * remotes/borntraeger/tags/s390x-20170714: (40 commits) s390x/gdb: add gs registers s390x/arch_dump: also dump guarded storage control block s390x/kvm: enable guarded storage s390x/kvm: Enable KSS facility for nested virtualization s390x/cpumodel: add esop/esop2 to z12 model s390x/cpumodel: we are always in zarchitecture mode s390x/cpumodel: wire up new hardware features s390x/flic: migrate ais states s390x/cpumodel: add zpci, aen and ais facilities s390x: initialize cpu firstly pc-bios/s390: rebuild s390-ccw.img pc-bios/s390: add s390-netboot.img pc-bios/s390-ccw: Link libnet into the netboot image and do the TFTP load pc-bios/s390-ccw: Add virtio-net driver code pc-bios/s390-ccw: Add core files for the network bootloading program roms/SLOF: Update submodule to latest status pc-bios/s390-ccw: Add code for virtio feature negotiation pc-bios/s390-ccw: Remove unused structs from virtio.h pc-bios/s390-ccw: Move byteswap functions to a separate header pc-bios/s390-ccw: Add a write() function for stdio ... Conflicts: target/s390x/kvm.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-14s390x/migration: Monitor commands for storage attributesClaudio Imbrenda1-0/+16
Add an "info" monitor command to non-destructively inspect the state of the storage attributes of the guest, and a normal command to toggle migration mode (useful for debugging). Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14hmp: add hmp analogue for qmp-chardev-changeAnton Nefedov1-1/+17
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1499342940-56739-11-git-send-email-anton.nefedov@virtuozzo.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-11block: remove all encryption handling APIsDaniel P. Berrange1-0/+2
Now that all encryption keys must be provided upfront via the QCryptoSecret API and associated block driver properties there is no need for any explicit encryption handling APIs in the block layer. Encryption can be handled transparently within the block driver. We only retain an API for querying whether an image is encrypted or not, since that is a potentially useful piece of metadata to report to the user. Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-18-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-06-29Add chardev-send-break monitor commandStefan Fritsch1-0/+16
Sending a break on a serial console can be useful for debugging the guest. But not all chardev backends support sending breaks (only telnet and mux do). The chardev-send-break command allows to send a break even if using other backends. Signed-off-by: Stefan Fritsch <sf@sfritsch.de> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170611074817.13621-1-sf@sfritsch.de> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Use 'send a break' in all 3 pieces of text as suggested by eblake
2017-05-29usb: Deprecate HMP commands usb_add and usb_delThomas Huth1-2/+4
The commands 'device_add' and 'device_del' should be used nowadays instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 1495175803-12830-1-git-send-email-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-23hmp / net: Mark host_net_add/remove as deprecatedThomas Huth1-4/+4
The netdev_add and netdev_del commands should be used nowadays instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-04-26hmp: gpa2hva and gpa2hpa hostaddr commandPaolo Bonzini1-0/+32
These commands are useful when testing machine-check passthrough. gpa2hva is useful to inject a MADV_HWPOISON madvise from gdb, while gpa2hpa is useful to inject an error with the mce-inject kernel module. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1490021158-4469-1-git-send-email-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20170420133058.12911-1-pbonzini@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2016-10-30COLO: Add 'x-colo-lost-heartbeat' command to trigger failoverzhanghailiang1-0/+15
We leave users to choose whatever heartbeat solution they want, if the heartbeat is lost, or other errors they detect, they can use experimental command 'x_colo_lost_heartbeat' to tell COLO to do failover, COLO will do operations accordingly. For example, if the command is sent to the Primary side, the Primary side will exit COLO mode, does cleanup work, and then, PVM will take over the service work. If sent to the Secondary side, the Secondary side will run failover work, then takes over PVM's service work. Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-09-19monitor: remove mhandler.cmd_newMarc-André Lureau1-104/+104
This is no longer necessary now that we aren't using middle mode anymore. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20160912091913.15831-12-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-09-05drive-backup: added support for data compressionPavel Butsykin1-3/+5
The idea is simple - backup is "written-once" data. It is written block by block and it is large enough. It would be nice to save storage space and compress it. The patch adds a flag to the qmp/hmp drive-backup command which enables block compression. Compression should be implemented in the format driver to enable this feature. There are some limitations of the format driver to allow compressed writes. We can write data only once. Though for backup this is perfectly fine. These limitations are maintained by the driver and the error will be reported if we are doing something wrong. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-18trace: Add QAPI/QMP interfaces to query and control per-vCPU tracing stateLluís Vilanova1-3/+4
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-05-26migration: define 'tls-creds' and 'tls-hostname' migration parametersDaniel P. Berrange1-1/+1
Define two new migration parameters to be used with TLS encryption. The 'tls-creds' parameter provides the ID of an instance of the 'tls-creds' object type, or rather a subclass such as 'tls-creds-x509'. Providing these credentials will enable use of TLS on the migration data stream. If using x509 certificates, together with a migration URI that does not include a hostname, the 'tls-hostname' parameter provides the hostname to use when verifying the server's x509 certificate. This allows TLS to be used in combination with fd: and exec: protocols where a TCP connection is established by a 3rd party outside of QEMU. NB, this requires changing the migrate_set_parameter method in the HMP to accept a 's' (string) value instead of 'i' (integer). This is backwards compatible, because the parsing of strings allows the quotes to be optional, thus any integer is also a valid string. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1461751518-12128-26-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-03-14hmp: 'drive_add -n' for creating a node without BBKevin Wolf1-2/+2
This patch adds an option to the drive_add HMP command to create only a BlockDriverState without a BlockBackend on top. The motivation for this is that libvirt needs to specify options to a migration target (specifically, detect-zeroes). drive-mirror doesn't allow specifying options, and the proper way to do this is to create the target BDS separately with blockdev-add (where you can specify options) and then use blockdev-mirror to that BDS. However, libvirt can't use blockdev-add as long as it is still experimental, and we're expecting that it will still take some time, so we need to resort to drive_add. The problem with drive_add is that so far it always created a BB, and BDSes with a BB can't be used as a mirroring target as long as we don't support multiple BBs per BDS - and while we're working towards that goal, it's another thing that will still take some time. So to achieve the goal, the simplest solution to provide the functionality now without adding one-off options to the mirror QMP commands is to extend drive_add to create nodes without BBs. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-11postcopy: Remove the x-Dr. David Alan Gilbert1-1/+1
Postcopy seems to have survived a cycle with only a few fixes, and Jiri has the current libvirt wired up and working ( https://www.redhat.com/archives/libvir-list/2016-March/msg00080.html ) so remove the experimental tag. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1457690016-9070-3-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-02-22dump-guest-memory: add "detach" flag for QMP/HMP interfaces.Peter Xu1-2/+3
This patch only adds the interfaces, but does not implement them. "detach" parameter is made optional, to make sure that all the old dump-guest-memory requests will still be able to work. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-Id: <1455772616-8668-3-git-send-email-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-12migrate-start-postcopy: Improve textDr. David Alan Gilbert1-1/+3
Improve the text in both the qapi-schema and hmp help to point out you need to set the postcopy-ram capability prior to issuing migrate-start-postcopy. Also fix the text of the migrate_start_postcopy error that deals with capabilities. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Acked-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-11hmp: Add read-only-mode option to change commandMax Reitz1-3/+17
Expose the new read-only-mode option of 'blockdev-change-medium' for the 'change' HMP command. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-10migrate_start_postcopy: Command to trigger transition to postcopyDr. David Alan Gilbert1-0/+15
Once postcopy is enabled (with migrate_set_capability), the migration will still start on precopy mode. To cause a transition into postcopy the: migrate_start_postcopy command must be issued. Postcopy will start sometime after this (when it's next checked in the migration loop). Issuing the command before migration has started will error, and issuing after it has finished is ignored. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-09-22monitor: allow device_del to accept QOM pathsDaniel P. Berrange1-1/+2
Currently device_del requires that the client provide the device short ID. device_add allows devices to be created without giving an ID, at which point there is no way to delete them with device_del. The QOM object path, however, provides an alternative way to identify the devices. Allowing device_del to accept an object path ensures all devices are deletable regardless of whether they have an ID. (qemu) device_add usb-mouse (qemu) qom-list /machine/peripheral-anon device[0] (child<usb-mouse>) type (string) (qemu) device_del /machine/peripheral-anon/device[0] Devices are required to be marked as hotpluggable otherwise an error is raised (qemu) device_del /machine/unattached/device[4] Device 'PIIX3' does not support hotplugging Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1441974836-17476-1-git-send-email-berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Commit message touched up, accidental white-space change dropped] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-09-16monitor: added generation of documentation for hmp-commands-info.hxPavel Butsykin1-123/+0
It will be easier if you need to add info-commands to edit only hmp-commands-info.hx, before this had to edit monitor.c and hmp-commands.hx. From the build point of view all documentation is saved into qemu-monitor-info.texi which from now on is used for all user documentation building. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1441899541-1856-5-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-16hmp-commands.hx: fix end of table infoPavel Butsykin1-1/+4
The table info(information about the system state) closes earlier and some of its elements are outside(trace-events, rocker, etc). This can be confusing and lead to additional bugs. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1441899541-1856-4-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-04hmp: add info iothreads commandTing Wang1-0/+2
Make "info iothreads" available on the HMP monitor. For example, the results are as follows when executing qemu command with "-object iothread,id=iothread-1 -object iothread,id=iothread-2". (qemu) info iothreads iothread-1: thread_id=123 iothread-2: thread_id=456 Signed-off-by: Ting Wang <kathy.wangting@huawei.com> Message-Id: <1435306033-58372-1-git-send-email-kathy.wangting@huawei.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Amos Jianjun Kong <kongjianjun@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-09-03Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell1-0/+1
into staging # gpg: Signature made Thu 03 Sep 2015 15:46:52 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/tracing-pull-request: trace-events: Add hmp completion Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-03trace-events: Add hmp completionDr. David Alan Gilbert1-0/+1
Add completion for the trace event names in the hmp trace-event command. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 1439548063-18410-1-git-send-email-dgilbert@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-09-03s390x: Info skeys sub-commandJason J. Herne1-0/+2
Provide an info skeys hmp sub-command to allow the end user to dump a storage key for a given address. This is useful for guest operating system developers. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>