summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-05-09 15:40:28 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2017-05-09 15:40:28 -0700
commit4879b7ae05431ebcd228a4ff25a81120b3d85891 (patch)
tree921267ebdc9757ee770db6ef74032a6524d94bfa /Documentation
parentecc721a72c121e8b641d68efd24a225abedb9a30 (diff)
parentbe13ec668d043e5313985014d34735ec6ede074a (diff)
Merge tag 'dmaengine-4.12-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul: "This time again a smaller update consisting of: - support for TI DA8xx dma controller and updates to the cppi driver - updates on bunch of drivers like xilinx, pl08x, stm32-dma, mv_xor, ioat, dmatest" * tag 'dmaengine-4.12-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (35 commits) dmaengine: pl08x: remove lock documentation dmaengine: pl08x: fix pl08x_dma_chan_state documentation dmaengine: pl08x: Use the BIT() macro consistently dmaengine: pl080: Fix some missing kerneldoc dmaengine: pl080: Cut some unused defines dmaengine: dmatest: Add check for supported buffer count (sg_buffers) dmaengine: dmatest: Select DMA_ENGINE_RAID as its needed for the slave_sg test dmaengine: virt-dma: Convert to use list_for_each_entry_safe() dma-debug: use offset_in_page() macro dmaengine: mv_xor: use offset_in_page() macro dmaengine: dmatest: use offset_in_page() macro dmaengine: sun4i: fix invalid argument dmaengine: ioat: use setup_timer dmaengine: cppi41: Fix an Oops happening in cppi41_dma_probe() dmaengine: pl330: remove pdata based initialization dmaengine: cppi: fix build error due to bad variable dmaengine: imx-sdma: add 1ms delay to ensure SDMA channel is stopped dmaengine: cppi41: use managed functions devm_*() dmaengine: cppi41: fix cppi41_dma_tx_status() logic dmaengine: qcom_hidma: pause the channel on shutdown ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/usb/da8xx-usb.txt41
1 files changed, 40 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
index ccb844aba7d4..717c5f656237 100644
--- a/Documentation/devicetree/bindings/usb/da8xx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
@@ -18,10 +18,26 @@ Required properties:
- phy-names: Should be "usb-phy"
+ - dmas: specifies the dma channels
+
+ - dma-names: specifies the names of the channels. Use "rxN" for receive
+ and "txN" for transmit endpoints. N specifies the endpoint number.
+
Optional properties:
~~~~~~~~~~~~~~~~~~~~
- vbus-supply: Phandle to a regulator providing the USB bus power.
+DMA
+~~~
+- compatible: ti,da830-cppi41
+- reg: offset and length of the following register spaces: CPPI DMA Controller,
+ CPPI DMA Scheduler, Queue Manager
+- reg-names: "controller", "scheduler", "queuemgr"
+- #dma-cells: should be set to 2. The first number represents the
+ channel number (0 … 3 for endpoints 1 … 4).
+ The second number is 0 for RX and 1 for TX transfers.
+- #dma-channels: should be set to 4 representing the 4 endpoints.
+
Example:
usb_phy: usb-phy {
compatible = "ti,da830-usb-phy";
@@ -30,7 +46,10 @@ Example:
};
usb0: usb@200000 {
compatible = "ti,da830-musb";
- reg = <0x00200000 0x10000>;
+ reg = <0x00200000 0x1000>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
interrupts = <58>;
interrupt-names = "mc";
@@ -39,5 +58,25 @@ Example:
phys = <&usb_phy 0>;
phy-names = "usb-phy";
+ dmas = <&cppi41dma 0 0 &cppi41dma 1 0
+ &cppi41dma 2 0 &cppi41dma 3 0
+ &cppi41dma 0 1 &cppi41dma 1 1
+ &cppi41dma 2 1 &cppi41dma 3 1>;
+ dma-names =
+ "rx1", "rx2", "rx3", "rx4",
+ "tx1", "tx2", "tx3", "tx4";
+
status = "okay";
+
+ cppi41dma: dma-controller@201000 {
+ compatible = "ti,da830-cppi41";
+ reg = <0x201000 0x1000
+ 0x202000 0x1000
+ 0x204000 0x4000>;
+ reg-names = "controller", "scheduler", "queuemgr";
+ interrupts = <58>;
+ #dma-cells = <2>;
+ #dma-channels = <4>;
+ };
+
};