diff options
| author | Quentin Schulz <quentin.schulz@free-electrons.com> | 2017-05-23 11:48:08 +0200 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2017-05-24 15:25:22 -0400 |
| commit | 159a07604a99bd01e7db112de08d53dc4fcad109 (patch) | |
| tree | 7cf7377276f4e82b10ef2dc1b53c290e829af7e2 | |
| parent | 11d3c949b4ca37124fcace1ee3a5c2db0737a268 (diff) | |
net: fec: add post PHY reset delay DT property
Some PHY require to wait for a bit after the reset GPIO has been
toggled. This adds support for the DT property `phy-reset-post-delay`
which gives the delay in milliseconds to wait after reset.
If the DT property is not given, no delay is observed. Post reset delay
greater than 1000ms are invalid.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
| -rw-r--r-- | Documentation/devicetree/bindings/net/fsl-fec.txt | 4 | ||||
| -rw-r--r-- | drivers/net/ethernet/freescale/fec_main.c | 16 |
2 files changed, 19 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index a1e3693cca16..6f55bdd52f8a 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -15,6 +15,10 @@ Optional properties: - phy-reset-active-high : If present then the reset sequence using the GPIO specified in the "phy-reset-gpios" property is reversed (H=reset state, L=operation state). +- phy-reset-post-delay : Post reset delay in milliseconds. If present then + a delay of phy-reset-post-delay milliseconds will be observed after the + phy-reset-gpios has been toggled. Can be omitted thus no delay is + observed. Delay is in range of 1ms to 1000ms. Other delays are invalid. - phy-supply : regulator that powers the Ethernet PHY. - phy-handle : phandle to the PHY device connected to this device. - fixed-link : Assume a fixed link. See fixed-link.txt in the same directory. diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 56a563f90b0b..f7c8649fd28f 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -3192,7 +3192,7 @@ static int fec_reset_phy(struct platform_device *pdev) { int err, phy_reset; bool active_high = false; - int msec = 1; + int msec = 1, phy_post_delay = 0; struct device_node *np = pdev->dev.of_node; if (!np) @@ -3209,6 +3209,11 @@ static int fec_reset_phy(struct platform_device *pdev) else if (!gpio_is_valid(phy_reset)) return 0; + err = of_property_read_u32(np, "phy-reset-post-delay", &phy_post_delay); + /* valid reset duration should be less than 1s */ + if (!err && phy_post_delay > 1000) + return -EINVAL; + active_high = of_property_read_bool(np, "phy-reset-active-high"); err = devm_gpio_request_one(&pdev->dev, phy_reset, @@ -3226,6 +3231,15 @@ static int fec_reset_phy(struct platform_device *pdev) gpio_set_value_cansleep(phy_reset, !active_high); + if (!phy_post_delay) + return 0; + + if (phy_post_delay > 20) + msleep(phy_post_delay); + else + usleep_range(phy_post_delay * 1000, + phy_post_delay * 1000 + 1000); + return 0; } #else /* CONFIG_OF */ |