diff options
Diffstat (limited to 'glib-patches/depcomp.update.diff')
-rw-r--r-- | glib-patches/depcomp.update.diff | 482 |
1 files changed, 0 insertions, 482 deletions
diff --git a/glib-patches/depcomp.update.diff b/glib-patches/depcomp.update.diff deleted file mode 100644 index e85c12f..0000000 --- a/glib-patches/depcomp.update.diff +++ /dev/null @@ -1,482 +0,0 @@ ---- glib-1.2.8/depcomp 1970-01-01 01:00:00.000000000 +0100 -+++ glib-1.2.8-pkgconfig/depcomp 2005-02-20 23:26:37.216663960 +0100 -@@ -0,0 +1,479 @@ -+#! /bin/sh -+ -+# depcomp - compile a program generating dependencies as side-effects -+# Copyright 1999, 2000, 2003 Free Software Foundation, Inc. -+ -+# This program is free software; you can redistribute it and/or modify -+# it under the terms of the GNU General Public License as published by -+# the Free Software Foundation; either version 2, or (at your option) -+# any later version. -+ -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+ -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -+# 02111-1307, USA. -+ -+# As a special exception to the GNU General Public License, if you -+# distribute this file as part of a program that contains a -+# configuration script generated by Autoconf, you may include it under -+# the same distribution terms that you use for the rest of that program. -+ -+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>. -+ -+if test -z "$depmode" || test -z "$source" || test -z "$object"; then -+ echo "depcomp: Variables source, object and depmode must be set" 1>&2 -+ exit 1 -+fi -+# `libtool' can also be set to `yes' or `no'. -+ -+if test -z "$depfile"; then -+ base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'` -+ dir=`echo "$object" | sed 's,/.*$,/,'` -+ if test "$dir" = "$object"; then -+ dir= -+ fi -+ # FIXME: should be _deps on DOS. -+ depfile="$dir.deps/$base" -+fi -+ -+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} -+ -+rm -f "$tmpdepfile" -+ -+# Some modes work just like other modes, but use different flags. We -+# parameterize here, but still list the modes in the big case below, -+# to make depend.m4 easier to write. Note that we *cannot* use a case -+# here, because this file can only contain one case statement. -+if test "$depmode" = hp; then -+ # HP compiler uses -M and no extra arg. -+ gccflag=-M -+ depmode=gcc -+fi -+ -+if test "$depmode" = dashXmstdout; then -+ # This is just like dashmstdout with a different argument. -+ dashmflag=-xM -+ depmode=dashmstdout -+fi -+ -+case "$depmode" in -+gcc3) -+## gcc 3 implements dependency tracking that does exactly what -+## we want. Yay! Note: for some reason libtool 1.4 doesn't like -+## it if -MD -MP comes after the -MF stuff. Hmm. -+ "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" -+ stat=$? -+ if test $stat -eq 0; then : -+ else -+ rm -f "$tmpdepfile" -+ exit $stat -+ fi -+ mv "$tmpdepfile" "$depfile" -+ ;; -+ -+gcc) -+## There are various ways to get dependency output from gcc. Here's -+## why we pick this rather obscure method: -+## - Don't want to use -MD because we'd like the dependencies to end -+## up in a subdir. Having to rename by hand is ugly. -+## (We might end up doing this anyway to support other compilers.) -+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like -+## -MM, not -M (despite what the docs say). -+## - Using -M directly means running the compiler twice (even worse -+## than renaming). -+ if test -z "$gccflag"; then -+ gccflag=-MD, -+ fi -+ "$@" -Wp,"$gccflag$tmpdepfile" -+ stat=$? -+ if test $stat -eq 0; then : -+ else -+ rm -f "$tmpdepfile" -+ exit $stat -+ fi -+ rm -f "$depfile" -+ echo "$object : \\" > "$depfile" -+ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz -+## The second -e expression handles DOS-style file names with drive letters. -+ sed -e 's/^[^:]*: / /' \ -+ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" -+## This next piece of magic avoids the `deleted header file' problem. -+## The problem is that when a header file which appears in a .P file -+## is deleted, the dependency causes make to die (because there is -+## typically no way to rebuild the header). We avoid this by adding -+## dummy dependencies for each header file. Too bad gcc doesn't do -+## this for us directly. -+ tr ' ' ' -+' < "$tmpdepfile" | -+## Some versions of gcc put a space before the `:'. On the theory -+## that the space means something, we add a space to the output as -+## well. -+## Some versions of the HPUX 10.20 sed can't process this invocation -+## correctly. Breaking it into two sed invocations is a workaround. -+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" -+ rm -f "$tmpdepfile" -+ ;; -+ -+hp) -+ # This case exists only to let depend.m4 do its work. It works by -+ # looking at the text of this script. This case will never be run, -+ # since it is checked for above. -+ exit 1 -+ ;; -+ -+sgi) -+ if test "$libtool" = yes; then -+ "$@" "-Wp,-MDupdate,$tmpdepfile" -+ else -+ "$@" -MDupdate "$tmpdepfile" -+ fi -+ stat=$? -+ if test $stat -eq 0; then : -+ else -+ rm -f "$tmpdepfile" -+ exit $stat -+ fi -+ rm -f "$depfile" -+ -+ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files -+ echo "$object : \\" > "$depfile" -+ -+ # Clip off the initial element (the dependent). Don't try to be -+ # clever and replace this with sed code, as IRIX sed won't handle -+ # lines with more than a fixed number of characters (4096 in -+ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; -+ # the IRIX cc adds comments like `#:fec' to the end of the -+ # dependency line. -+ tr ' ' ' -+' < "$tmpdepfile" \ -+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ -+ tr ' -+' ' ' >> $depfile -+ echo >> $depfile -+ -+ # The second pass generates a dummy entry for each header file. -+ tr ' ' ' -+' < "$tmpdepfile" \ -+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ -+ >> $depfile -+ else -+ # The sourcefile does not contain any dependencies, so just -+ # store a dummy comment line, to avoid errors with the Makefile -+ # "include basename.Plo" scheme. -+ echo "#dummy" > "$depfile" -+ fi -+ rm -f "$tmpdepfile" -+ ;; -+ -+aix) -+ # The C for AIX Compiler uses -M and outputs the dependencies -+ # in a .u file. In older versions, this file always lives in the -+ # current directory. Also, the AIX compiler puts `$object:' at the -+ # start of each line; $object doesn't have directory information. -+ # Version 6 uses the directory in both cases. -+ stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` -+ tmpdepfile="$stripped.u" -+ if test "$libtool" = yes; then -+ "$@" -Wc,-M -+ else -+ "$@" -M -+ fi -+ stat=$? -+ -+ if test -f "$tmpdepfile"; then : -+ else -+ stripped=`echo "$stripped" | sed 's,^.*/,,'` -+ tmpdepfile="$stripped.u" -+ fi -+ -+ if test $stat -eq 0; then : -+ else -+ rm -f "$tmpdepfile" -+ exit $stat -+ fi -+ -+ if test -f "$tmpdepfile"; then -+ outname="$stripped.o" -+ # Each line is of the form `foo.o: dependent.h'. -+ # Do two passes, one to just change these to -+ # `$object: dependent.h' and one to simply `dependent.h:'. -+ sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" -+ sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" -+ else -+ # The sourcefile does not contain any dependencies, so just -+ # store a dummy comment line, to avoid errors with the Makefile -+ # "include basename.Plo" scheme. -+ echo "#dummy" > "$depfile" -+ fi -+ rm -f "$tmpdepfile" -+ ;; -+ -+icc) -+ # Intel's C compiler understands `-MD -MF file'. However on -+ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c -+ # ICC 7.0 will fill foo.d with something like -+ # foo.o: sub/foo.c -+ # foo.o: sub/foo.h -+ # which is wrong. We want: -+ # sub/foo.o: sub/foo.c -+ # sub/foo.o: sub/foo.h -+ # sub/foo.c: -+ # sub/foo.h: -+ # ICC 7.1 will output -+ # foo.o: sub/foo.c sub/foo.h -+ # and will wrap long lines using \ : -+ # foo.o: sub/foo.c ... \ -+ # sub/foo.h ... \ -+ # ... -+ -+ "$@" -MD -MF "$tmpdepfile" -+ stat=$? -+ if test $stat -eq 0; then : -+ else -+ rm -f "$tmpdepfile" -+ exit $stat -+ fi -+ rm -f "$depfile" -+ # Each line is of the form `foo.o: dependent.h', -+ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. -+ # Do two passes, one to just change these to -+ # `$object: dependent.h' and one to simply `dependent.h:'. -+ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" -+ # Some versions of the HPUX 10.20 sed can't process this invocation -+ # correctly. Breaking it into two sed invocations is a workaround. -+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | -+ sed -e 's/$/ :/' >> "$depfile" -+ rm -f "$tmpdepfile" -+ ;; -+ -+tru64) -+ # The Tru64 compiler uses -MD to generate dependencies as a side -+ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. -+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put -+ # dependencies in `foo.d' instead, so we check for that too. -+ # Subdirectories are respected. -+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` -+ test "x$dir" = "x$object" && dir= -+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` -+ -+ if test "$libtool" = yes; then -+ tmpdepfile1="$dir.libs/$base.lo.d" -+ tmpdepfile2="$dir.libs/$base.d" -+ "$@" -Wc,-MD -+ else -+ tmpdepfile1="$dir$base.o.d" -+ tmpdepfile2="$dir$base.d" -+ "$@" -MD -+ fi -+ -+ stat=$? -+ if test $stat -eq 0; then : -+ else -+ rm -f "$tmpdepfile1" "$tmpdepfile2" -+ exit $stat -+ fi -+ -+ if test -f "$tmpdepfile1"; then -+ tmpdepfile="$tmpdepfile1" -+ else -+ tmpdepfile="$tmpdepfile2" -+ fi -+ if test -f "$tmpdepfile"; then -+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" -+ # That's a tab and a space in the []. -+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" -+ else -+ echo "#dummy" > "$depfile" -+ fi -+ rm -f "$tmpdepfile" -+ ;; -+ -+#nosideeffect) -+ # This comment above is used by automake to tell side-effect -+ # dependency tracking mechanisms from slower ones. -+ -+dashmstdout) -+ # Important note: in order to support this mode, a compiler *must* -+ # always write the preprocessed file to stdout, regardless of -o. -+ "$@" || exit $? -+ -+ # Remove the call to Libtool. -+ if test "$libtool" = yes; then -+ while test $1 != '--mode=compile'; do -+ shift -+ done -+ shift -+ fi -+ -+ # Remove `-o $object'. -+ IFS=" " -+ for arg -+ do -+ case $arg in -+ -o) -+ shift -+ ;; -+ $object) -+ shift -+ ;; -+ *) -+ set fnord "$@" "$arg" -+ shift # fnord -+ shift # $arg -+ ;; -+ esac -+ done -+ -+ test -z "$dashmflag" && dashmflag=-M -+ # Require at least two characters before searching for `:' -+ # in the target name. This is to cope with DOS-style filenames: -+ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. -+ "$@" $dashmflag | -+ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" -+ rm -f "$depfile" -+ cat < "$tmpdepfile" > "$depfile" -+ tr ' ' ' -+' < "$tmpdepfile" | \ -+## Some versions of the HPUX 10.20 sed can't process this invocation -+## correctly. Breaking it into two sed invocations is a workaround. -+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" -+ rm -f "$tmpdepfile" -+ ;; -+ -+dashXmstdout) -+ # This case only exists to satisfy depend.m4. It is never actually -+ # run, as this mode is specially recognized in the preamble. -+ exit 1 -+ ;; -+ -+makedepend) -+ "$@" || exit $? -+ # Remove any Libtool call -+ if test "$libtool" = yes; then -+ while test $1 != '--mode=compile'; do -+ shift -+ done -+ shift -+ fi -+ # X makedepend -+ shift -+ cleared=no -+ for arg in "$@"; do -+ case $cleared in -+ no) -+ set ""; shift -+ cleared=yes ;; -+ esac -+ case "$arg" in -+ -D*|-I*) -+ set fnord "$@" "$arg"; shift ;; -+ # Strip any option that makedepend may not understand. Remove -+ # the object too, otherwise makedepend will parse it as a source file. -+ -*|$object) -+ ;; -+ *) -+ set fnord "$@" "$arg"; shift ;; -+ esac -+ done -+ obj_suffix="`echo $object | sed 's/^.*\././'`" -+ touch "$tmpdepfile" -+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" -+ rm -f "$depfile" -+ cat < "$tmpdepfile" > "$depfile" -+ sed '1,2d' "$tmpdepfile" | tr ' ' ' -+' | \ -+## Some versions of the HPUX 10.20 sed can't process this invocation -+## correctly. Breaking it into two sed invocations is a workaround. -+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" -+ rm -f "$tmpdepfile" "$tmpdepfile".bak -+ ;; -+ -+cpp) -+ # Important note: in order to support this mode, a compiler *must* -+ # always write the preprocessed file to stdout. -+ "$@" || exit $? -+ -+ # Remove the call to Libtool. -+ if test "$libtool" = yes; then -+ while test $1 != '--mode=compile'; do -+ shift -+ done -+ shift -+ fi -+ -+ # Remove `-o $object'. -+ IFS=" " -+ for arg -+ do -+ case $arg in -+ -o) -+ shift -+ ;; -+ $object) -+ shift -+ ;; -+ *) -+ set fnord "$@" "$arg" -+ shift # fnord -+ shift # $arg -+ ;; -+ esac -+ done -+ -+ "$@" -E | -+ sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | -+ sed '$ s: \\$::' > "$tmpdepfile" -+ rm -f "$depfile" -+ echo "$object : \\" > "$depfile" -+ cat < "$tmpdepfile" >> "$depfile" -+ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" -+ rm -f "$tmpdepfile" -+ ;; -+ -+msvisualcpp) -+ # Important note: in order to support this mode, a compiler *must* -+ # always write the preprocessed file to stdout, regardless of -o, -+ # because we must use -o when running libtool. -+ "$@" || exit $? -+ IFS=" " -+ for arg -+ do -+ case "$arg" in -+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") -+ set fnord "$@" -+ shift -+ shift -+ ;; -+ *) -+ set fnord "$@" "$arg" -+ shift -+ shift -+ ;; -+ esac -+ done -+ "$@" -E | -+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" -+ rm -f "$depfile" -+ echo "$object : \\" > "$depfile" -+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" -+ echo " " >> "$depfile" -+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" -+ rm -f "$tmpdepfile" -+ ;; -+ -+none) -+ exec "$@" -+ ;; -+ -+*) -+ echo "Unknown depmode $depmode" 1>&2 -+ exit 1 -+ ;; -+esac -+ -+exit 0 |