diff options
-rw-r--r-- | LICENSE | 2 | ||||
-rw-r--r-- | MacFiles.h | 6 | ||||
-rw-r--r-- | Makefile | 29 | ||||
-rw-r--r-- | Makefile.Mac | 25 | ||||
-rw-r--r-- | Makefile.in | 14 | ||||
-rw-r--r-- | README | 14 | ||||
-rwxr-xr-x | config.guess | 1317 | ||||
-rwxr-xr-x | config.sub | 1411 | ||||
-rwxr-xr-x | configure | 1402 | ||||
-rw-r--r-- | configure.in | 8 | ||||
-rw-r--r-- | crctab.c | 193 | ||||
-rw-r--r-- | dfont2res.c | 36 | ||||
-rw-r--r-- | fondu.c | 5 | ||||
-rw-r--r-- | frombin.1 | 17 | ||||
-rw-r--r-- | frommacbinary.c | 209 | ||||
-rwxr-xr-x | install-sh | 251 | ||||
-rw-r--r-- | showfond.c | 2 | ||||
-rw-r--r-- | tobin.1 | 36 | ||||
-rw-r--r-- | tomacbinary.c | 366 | ||||
-rw-r--r-- | ufond.c | 36 |
20 files changed, 4747 insertions, 632 deletions
@@ -1,4 +1,4 @@ -PfaEdit is copyright (C) 2000,2001 by George Williams +PfaEdit is copyright (C) 2000,2001,2002 by George Williams Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: @@ -43,9 +43,9 @@ typedef struct FSCatalogInfo { } FSCatalogInfo; short FSpOpenRF(const FSSpec *spec,char permission,short *refNum); -short FSpCreateResFile(const FSSpec *spec,int creator,int type,short script); -short FSRead(short refNum,int *cnt,char *buf); -short FSWrite(short refNum,int *cnt,char *buf); +void FSpCreateResFile(const FSSpec *spec,int creator,int type,short script); +short FSRead(short refNum,long *cnt,char *buf); +short FSWrite(short refNum,long *cnt,char *buf); short FSClose(short refNum ); short FSpGetFInfo(const FSSpec *spec,FInfo *fndrInfo); short SetEOF(short refNum,int eofpos); diff --git a/Makefile b/Makefile deleted file mode 100644 index 75da1f8..0000000 --- a/Makefile +++ /dev/null @@ -1,29 +0,0 @@ -CC = gcc -WFLAGS = -Wmissing-prototypes -Wunused -Wimplicit -Wreturn-type -Wparentheses -pedantic -CFLAGS = -g $(WFLAGS) -FONDUOBJS = fondu.o readnfnt.o -UFONDOBJS = ufond.o ufondbdf.o ufondpfb.o ufondttf.o crctab.o -DFONT2RESOBJS = dfont2res.o crctab.o -SHOWOBJS = showfond.o - -bindir = /usr/local/bin - -all: fondu ufond showfond dfont2res - -fondu: $(FONDUOBJS) - $(CC) $(CFLAGS) -o fondu $(FONDUOBJS) - -ufond: $(UFONDOBJS) - $(CC) $(CFLAGS) -o ufond $(UFONDOBJS) - -showfond: $(SHOWOBJS) - $(CC) $(CFLAGS) -o showfond $(SHOWOBJS) - -dfont2res: $(DFONT2RESOBJS) - $(CC) $(CFLAGS) -o dfont2res $(DFONT2RESOBJS) - -clean: - -rm -f *.o fondu ufond showfond dfont2res - -install: all - cp fondu ufond showfond dfont2res $(bindir) diff --git a/Makefile.Mac b/Makefile.Mac index 11f1505..640d4ee 100644 --- a/Makefile.Mac +++ b/Makefile.Mac @@ -1,16 +1,22 @@ CC = cc -WFLAGS = -Wmissing-prototypes -Wunused -Wimplicit -Wreturn-type -Wparentheses -pedantic -CFLAGS = -g $(WFLAGS) -D__Mac +#WFLAGS = -Wmissing-prototypes -Wunused -Wimplicit -Wreturn-type -Wparentheses -pedantic +# the 10.2 (July-2002) developer tools seems to think that all preprocessor +# directives are gnu extensions, and -pedantic generates a warning for each +# #include, #if, etc. +WFLAGS = -Wmissing-prototypes -Wunused -Wimplicit -Wreturn-type -Wparentheses +CFLAGS = -g $(WFLAGS) -D__Mac -I/Developer/Headers/FlatCarbon/ FONDUOBJS = fondu.o readnfnt.o UFONDOBJS = ufond.o ufondbdf.o ufondpfb.o ufondttf.o crctab.o DFONT2RESOBJS = dfont2res.o crctab.o SHOWOBJS = showfond.o +TOBINOBJS = tomacbinary.o crctab.o +FROMBINOBJS = frommacbinary.o #CORE = /System/Library/Frameworks/CoreServices.framework/Frameworks/CarbonCore.framework/CarbonCore CORE = /System/Library/Frameworks/CoreServices.framework/CoreServices bindir = /usr/local/bin -all: fondu ufond showfond dfont2res +all: fondu ufond showfond dfont2res tobin frombin fondu: $(FONDUOBJS) $(CC) $(CFLAGS) -o fondu $(FONDUOBJS) $(CORE) @@ -24,8 +30,17 @@ showfond: $(SHOWOBJS) dfont2res: $(DFONT2RESOBJS) $(CC) $(CFLAGS) -o dfont2res $(DFONT2RESOBJS) +tobin: $(TOBINOBJS) + $(CC) $(CFLAGS) -o tobin $(TOBINOBJS) $(CORE) + +frombin: $(FROMBINOBJS) + $(CC) $(CFLAGS) -o frombin $(FROMBINOBJS) $(CORE) + clean: - -rm -f *.o fondu ufond showfond dfont2res + -rm -f *.o fondu ufond showfond dfont2res tobin frombin + +distclean: clean + -rm Makefile install: all - cp fondu ufond showfond dfont2res $(bindir) + cp fondu ufond showfond dfont2res tobin frombin $(bindir) diff --git a/Makefile.in b/Makefile.in index 0f9011b..b2b4908 100644 --- a/Makefile.in +++ b/Makefile.in @@ -10,8 +10,10 @@ FONDUOBJS = fondu.o readnfnt.o UFONDOBJS = ufond.o ufondbdf.o ufondpfb.o ufondttf.o crctab.o DFONT2RESOBJS = dfont2res.o crctab.o SHOWOBJS = showfond.o +TOBINOBJS = tomacbinary.o crctab.o +FROMBINOBJS = frommacbinary.o -all: fondu ufond showfond dfont2res +all: fondu ufond showfond dfont2res tobin frombin fondu: $(FONDUOBJS) $(CC) $(CFLAGS) -o fondu $(FONDUOBJS) @@ -25,11 +27,17 @@ showfond: $(SHOWOBJS) dfont2res: $(DFONT2RESOBJS) $(CC) $(CFLAGS) -o dfont2res $(DFONT2RESOBJS) +tobin: $(TOBINOBJS) + $(CC) $(CFLAGS) -o tobin $(TOBINOBJS) + +frombin: $(FROMBINOBJS) + $(CC) $(CFLAGS) -o frombin $(FROMBINOBJS) + clean: - -rm -f *.o fondu ufond showfond dfont2res + -rm -f *.o fondu ufond showfond dfont2res tobin frombin distclean: clean -rm Makefile install: all - cp fondu ufond showfond dfont2res $(bindir) + cp fondu ufond showfond dfont2res tobin frombin $(bindir) @@ -1,8 +1,8 @@ BUILDING FONDU - I hope that these programs are sufficiently simple that they don't need a - configure script. Just type + Just type: + $ configure $ make - $ make install + # make install RUNNING FONDU fondu mac-font-files @@ -14,3 +14,11 @@ RUNNING FONDU be placed in one mac FOND (family). showfond mac-font-files Will show some information about various mac font resources. + tobin files + Will take a list of files and convert them into macbinary format + frombin files + Will take a list of files and convert them from macbinary format + (on non-max platforms each output file may be split into three files + <filename>.data For the data fork + <filename>.rcsc For the resource fork + <filename>.info For random info on the font diff --git a/config.guess b/config.guess new file mode 100755 index 0000000..dff9e48 --- /dev/null +++ b/config.guess @@ -0,0 +1,1317 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +# Free Software Foundation, Inc. + +timestamp='2001-09-04' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Written by Per Bothner <bothner@cygnus.com>. +# Please send patches to <config-patches@gnu.org>. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# The plan is that this can be called by configure scripts if you +# don't specify an explicit build system type. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to <config-patches@gnu.org>." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit 0 ;; + --version | -v ) + echo "$version" ; exit 0 ;; + --help | --h* | -h ) + echo "$usage"; exit 0 ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + + +dummy=dummy-$$ +trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +set_cc_for_build='case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int dummy(){}" > $dummy.c ; + for c in cc gcc c89 ; do + ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 ; + if test $? = 0 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + rm -f $dummy.c $dummy.o $dummy.rel ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # Netbsd (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # Determine the machine/vendor (is the vendor relevant). + case "${UNAME_MACHINE}" in + amiga) machine=m68k-unknown ;; + arm32) machine=arm-unknown ;; + atari*) machine=m68k-atari ;; + sun3*) machine=m68k-sun ;; + mac68k) machine=m68k-apple ;; + macppc) machine=powerpc-apple ;; + hp3[0-9][05]) machine=m68k-hp ;; + ibmrt|romp-ibm) machine=romp-ibm ;; + *) machine=${UNAME_MACHINE}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE}" in + i386|sparc|amiga|arm*|hp300|mvme68k|vax|atari|luna68k|mac68k|news68k|next68k|pc532|sun3*|x68k) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep __ELF__ >/dev/null + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit 0 ;; + alpha:OSF1:*:*) + if test $UNAME_RELEASE = "V4.0"; then + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + fi + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + cat <<EOF >$dummy.s + .data +\$Lformat: + .byte 37,100,45,37,120,10,0 # "%d-%x\n" + + .text + .globl main + .align 4 + .ent main +main: + .frame \$30,16,\$26,0 + ldgp \$29,0(\$27) + .prologue 1 + .long 0x47e03d80 # implver \$0 + lda \$2,-1 + .long 0x47e20c21 # amask \$2,\$1 + lda \$16,\$Lformat + mov \$0,\$17 + not \$1,\$18 + jsr \$26,printf + ldgp \$29,0(\$26) + mov 0,\$16 + jsr \$26,exit + .end main +EOF + eval $set_cc_for_build + $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null + if test "$?" = 0 ; then + case `./$dummy` in + 0-0) + UNAME_MACHINE="alpha" + ;; + 1-0) + UNAME_MACHINE="alphaev5" + ;; + 1-1) + UNAME_MACHINE="alphaev56" + ;; + 1-101) + UNAME_MACHINE="alphapca56" + ;; + 2-303) + UNAME_MACHINE="alphaev6" + ;; + 2-307) + UNAME_MACHINE="alphaev67" + ;; + 2-1307) + UNAME_MACHINE="alphaev68" + ;; + esac + fi + rm -f $dummy.s $dummy + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit 0 ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit 0 ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit 0 ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit 0;; + amiga:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit 0 ;; + arc64:OpenBSD:*:*) + echo mips64el-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + arc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + hkmips:OpenBSD:*:*) + echo mips-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + pmax:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sgi:OpenBSD:*:*) + echo mips-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + wgrisc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit 0 ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit 0;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit 0;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit 0 ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit 0 ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + i86pc:SunOS:5.*:*) + echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit 0 ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit 0 ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit 0 ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit 0 ;; + sparc*:NetBSD:*) + echo `uname -p`-unknown-netbsd${UNAME_RELEASE} + exit 0 ;; + atari*:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit 0 ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit 0 ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit 0 ;; + sun3*:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mac68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme88k:OpenBSD:*:*) + echo m88k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit 0 ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit 0 ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit 0 ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit 0 ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit 0 ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include <stdio.h> /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD $dummy.c -o $dummy \ + && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ + && rm -f $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + echo mips-mips-riscos${UNAME_RELEASE} + exit 0 ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit 0 ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit 0 ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit 0 ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit 0 ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit 0 ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit 0 ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit 0 ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit 0 ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit 0 ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit 0 ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit 0 ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit 0 ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit 0 ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include <sys/systemcfg.h> + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + echo rs6000-ibm-aix3.2.5 + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit 0 ;; + *:AIX:*:[45]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit 0 ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit 0 ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit 0 ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit 0 ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit 0 ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit 0 ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit 0 ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit 0 ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + case "${HPUX_REV}" in + 11.[0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + esac ;; + esac + fi ;; + esac + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include <stdlib.h> + #include <unistd.h> + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy` + if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi + rm -f $dummy.c $dummy + fi ;; + esac + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit 0 ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit 0 ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include <unistd.h> + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + echo unknown-hitachi-hiuxwe2 + exit 0 ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit 0 ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit 0 ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit 0 ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit 0 ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit 0 ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit 0 ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit 0 ;; + hppa*:OpenBSD:*:*) + echo hppa-unknown-openbsd + exit 0 ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit 0 ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit 0 ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit 0 ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit 0 ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit 0 ;; + CRAY*X-MP:*:*:*) + echo xmp-cray-unicos + exit 0 ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*T3D:*:*:*) + echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY-2:*:*:*) + echo cray2-cray-unicos + exit 0 ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit 0 ;; + hp300:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit 0 ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; + *:FreeBSD:*:*) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit 0 ;; + *:OpenBSD:*:*) + echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + exit 0 ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit 0 ;; + i*:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit 0 ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit 0 ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i386-pc-interix + exit 0 ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit 0 ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit 0 ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + *:GNU:*:*) + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit 0 ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit 0 ;; + arm*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux + exit 0 ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + mips:Linux:*:*) + case `sed -n '/^byte/s/^.*: \(.*\) endian/\1/p' < /proc/cpuinfo` in + big) echo mips-unknown-linux-gnu && exit 0 ;; + little) echo mipsel-unknown-linux-gnu && exit 0 ;; + esac + ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit 0 ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit 0 ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit 0 ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit 0 ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit 0 ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit 0 ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit 0 ;; + i*86:Linux:*:*) + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. + ld_supported_targets=`cd /; ld --help 2>&1 \ + | sed -ne '/supported targets:/!d + s/[ ][ ]*/ /g + s/.*supported targets: *// + s/ .*// + p'` + case "$ld_supported_targets" in + elf32-i386) + TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" + ;; + a.out-i386-linux) + echo "${UNAME_MACHINE}-pc-linux-gnuaout" + exit 0 ;; + coff-i386) + echo "${UNAME_MACHINE}-pc-linux-gnucoff" + exit 0 ;; + "") + # Either a pre-BFD a.out linker (linux-gnuoldld) or + # one that does not give us useful --help. + echo "${UNAME_MACHINE}-pc-linux-gnuoldld" + exit 0 ;; + esac + # Determine whether the default compiler is a.out or elf + eval $set_cc_for_build + cat >$dummy.c <<EOF +#include <features.h> +#ifdef __cplusplus +#include <stdio.h> /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif +#ifdef __ELF__ +# ifdef __GLIBC__ +# if __GLIBC__ >= 2 + printf ("%s-pc-linux-gnu\n", argv[1]); +# else + printf ("%s-pc-linux-gnulibc1\n", argv[1]); +# endif +# else + printf ("%s-pc-linux-gnulibc1\n", argv[1]); +# endif +#else + printf ("%s-pc-linux-gnuaout\n", argv[1]); +#endif + return 0; +} +EOF + $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 + ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit 0 ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit 0 ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit 0 ;; + i*86:*:5:[78]*) + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit 0 ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name` + echo ${UNAME_MACHINE}-pc-isc$UNAME_REL + elif /bin/uname -X 2>/dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')` + (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit 0 ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit 0 ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i386. + echo i386-pc-msdosdjgpp + exit 0 ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit 0 ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit 0 ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit 0 ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit 0 ;; + M68*:*:R3V[567]*:*) + test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; + 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && echo i486-ncr-sysv4.3${OS_REL} && exit 0 + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && echo i486-ncr-sysv4 && exit 0 ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit 0 ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit 0 ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit 0 ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit 0 ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit 0 ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says <Richard.M.Bartel@ccMail.Census.GOV> + echo i586-unisys-sysv4 + exit 0 ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes <hewes@openmarket.com>. + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit 0 ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit 0 ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit 0 ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit 0 ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit 0 ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit 0 ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit 0 ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit 0 ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit 0 ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit 0 ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit 0 ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + *:Darwin:*:*) + echo `uname -p`-apple-darwin${UNAME_RELEASE} + exit 0 ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + if test "${UNAME_MACHINE}" = "x86pc"; then + UNAME_MACHINE=pc + fi + echo `uname -p`-${UNAME_MACHINE}-nto-qnx + exit 0 ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit 0 ;; + NSR-[KW]:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit 0 ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit 0 ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit 0 ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit 0 ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit 0 ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit 0 ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit 0 ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit 0 ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit 0 ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit 0 ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit 0 ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit 0 ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit 0 ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit 0 ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c <<EOF +#ifdef _SEQUENT_ +# include <sys/types.h> +# include <sys/utsname.h> +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include <sys/param.h> + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include <sys/param.h> +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0 +rm -f $dummy.c $dummy + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit 0 ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit 0 ;; + c34*) + echo c34-convex-bsd + exit 0 ;; + c38*) + echo c38-convex-bsd + exit 0 ;; + c4*) + echo c4-convex-bsd + exit 0 ;; + esac +fi + +cat >&2 <<EOF +$0: unable to guess system type + +This script, last modified $timestamp, has failed to recognize +the operating system you are using. It is advised that you +download the most up to date version of the config scripts from + + ftp://ftp.gnu.org/pub/gnu/config/ + +If the version you run ($0) is already up to date, please +send the following data and any information you think might be +pertinent to <config-patches@gnu.org> in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/config.sub b/config.sub new file mode 100755 index 0000000..393f13d --- /dev/null +++ b/config.sub @@ -0,0 +1,1411 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +# Free Software Foundation, Inc. + +timestamp='2001-09-07' + +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, +# Boston, MA 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Please send patches to <config-patches@gnu.org>. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to <config-patches@gnu.org>." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit 0 ;; + --version | -v ) + echo "$version" ; exit 0 ;; + --help | --h* | -h ) + echo "$usage"; exit 0 ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit 0;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | storm-chaos* | os2-emx* | windows32-*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis) + os= + basic_machine=$1 + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ + | c4x | clipper \ + | d10v | d30v | dsp16xx \ + | fr30 \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | i370 | i860 | i960 | ia64 \ + | m32r | m68000 | m68k | m88k | mcore \ + | mips16 | mips64 | mips64el | mips64orion | mips64orionel \ + | mips64vr4100 | mips64vr4100el | mips64vr4300 \ + | mips64vr4300el | mips64vr5000 | mips64vr5000el \ + | mipsbe | mipseb | mipsel | mipsle | mipstx39 | mipstx39el \ + | mipsisa32 \ + | mn10200 | mn10300 \ + | ns16k | ns32k \ + | openrisc \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | pyramid \ + | s390 | s390x \ + | sh | sh[34] | sh[34]eb | shbe | shle \ + | sparc | sparc64 | sparclet | sparclite | sparcv9 | sparcv9b \ + | stormy16 | strongarm \ + | tahoe | thumb | tic80 | tron \ + | v850 \ + | we32k \ + | x86 | xscale \ + | z8k) + basic_machine=$basic_machine-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alphapca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armv*-* \ + | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c54x-* \ + | clipper-* | cray2-* | cydra-* \ + | d10v-* | d30v-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fr30-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | m32r-* \ + | m68000-* | m680[01234]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | mcore-* \ + | mips-* | mips16-* | mips64-* | mips64el-* | mips64orion-* \ + | mips64orionel-* | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* | mipsbe-* | mipseb-* \ + | mipsle-* | mipsel-* | mipstx39-* | mipstx39el-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ + | romp-* | rs6000-* \ + | s390-* | s390x-* \ + | sh-* | sh[34]-* | sh[34]eb-* | shbe-* | shle-* \ + | sparc-* | sparc64-* | sparc86x-* | sparclite-* \ + | sparcv9-* | sparcv9b-* | stormy16-* | strongarm-* | sv1-* \ + | t3e-* | tahoe-* | thumb-* | tic30-* | tic54x-* | tic80-* | tron-* \ + | v850-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xmp-* | xps100-* | xscale-* \ + | ymp-* \ + | z8k-*) + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | ymp) + basic_machine=ymp-cray + os=-unicos + ;; + cray2) + basic_machine=cray2-cray + os=-unicos + ;; + [cjt]90) + basic_machine=${basic_machine}-cray + os=-unicos + ;; + crds | unos) + basic_machine=m68k-crds + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; +# I'm not sure what "Sysv32" means. Should this be sysv3.2? + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mipsel*-linux*) + basic_machine=mipsel-unknown + os=-linux-gnu + ;; + mips*-linux*) + basic_machine=mips-unknown + os=-linux-gnu + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + mmix*) + basic_machine=mmix-knuth + os=-mmixware + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pentium | p5 | k5 | k6 | nexgen) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon) + basic_machine=i686-pc + ;; + pentiumii | pentium2) + basic_machine=i686-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc) basic_machine=powerpc-unknown + ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sparclite-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=t3e-cray + os=-unicos + ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + windows32) + basic_machine=i386-pc + os=-windows32-msvcrt + ;; + xmp) + basic_machine=xmp-cray + os=-unicos + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + mips) + if [ x$os = x-linux-gnu ]; then + basic_machine=mips-unknown + else + basic_machine=mips-mips + fi + ;; + romp) + basic_machine=romp-ibm + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh3 | sh4 | sh3eb | sh4eb) + basic_machine=sh-unknown + ;; + sparc | sparcv9 | sparcv9b) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + c4x*) + basic_machine=c4x-none + os=-coff + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ + | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto*) + os=-nto-qnx + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + m68*-cisco) + os=-aout + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-ibm) + os=-aix + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -vxsim* | -vxworks*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: @@ -1,24 +1,22 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by Autoconf 2.52. +# Generated by GNU Autoconf 2.53. # -# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 +# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 # Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi -# Sed expression to map a string onto a valid variable name. -as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then @@ -28,8 +26,165 @@ elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi +# NLS nuisances. +# Support unset when possible. +if (FOO=FOO; unset FOO) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + +(set +x; test -n "`(LANG=C; export LANG) 2>&1`") && + { $as_unset LANG || test "${LANG+set}" != set; } || + { LANG=C; export LANG; } +(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") && + { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } || + { LC_ALL=C; export LC_ALL; } +(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") && + { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } || + { LC_TIME=C; export LC_TIME; } +(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") && + { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } || + { LC_CTYPE=C; export LC_CTYPE; } +(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") && + { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } || + { LANGUAGE=C; export LANGUAGE; } +(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") && + { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } || + { LC_COLLATE=C; export LC_COLLATE; } +(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") && + { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } || + { LC_NUMERIC=C; export LC_NUMERIC; } +(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") && + { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } || + { LC_MESSAGES=C; export LC_MESSAGES; } + + # Name of the executable. -as_me=`echo "$0" |sed 's,.*[\\/],,'` +as_me=`(basename "$0") 2>/dev/null || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conftest.sh + echo "exit 0" >>conftest.sh + chmod +x conftest.sh + if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conftest.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr @@ -57,22 +212,12 @@ rm -f conf$$ conf$$.exe conf$$.file as_executable_p="test -f" -# Support unset when possible. -if (FOO=FOO; unset FOO) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" -# NLS nuisances. -$as_unset LANG || test "${LANG+set}" != set || { LANG=C; export LANG; } -$as_unset LC_ALL || test "${LC_ALL+set}" != set || { LC_ALL=C; export LC_ALL; } -$as_unset LC_TIME || test "${LC_TIME+set}" != set || { LC_TIME=C; export LC_TIME; } -$as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set || { LC_CTYPE=C; export LC_CTYPE; } -$as_unset LANGUAGE || test "${LANGUAGE+set}" != set || { LANGUAGE=C; export LANGUAGE; } -$as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set || { LC_COLLATE=C; export LC_COLLATE; } -$as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set || { LC_NUMERIC=C; export LC_NUMERIC; } -$as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set || { LC_MESSAGES=C; export LC_MESSAGES; } # IFS # We need space, tab and new line, in precisely that order. @@ -81,7 +226,8 @@ as_nl=' IFS=" $as_nl" # CDPATH. -$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=:; export CDPATH; } +$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } + # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, @@ -96,7 +242,8 @@ exec 6>&1 ac_default_prefix=/usr/local cross_compiling=no subdirs= -MFLAGS= MAKEFLAGS= +MFLAGS= +MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Maximum number of lines to put in a shell here document. @@ -104,6 +251,13 @@ SHELL=${CONFIG_SHELL-/bin/sh} # only ac_max_sed_lines should be used. : ${ac_max_here_lines=38} +# Identity of this package. +PACKAGE_NAME= +PACKAGE_TARNAME= +PACKAGE_VERSION= +PACKAGE_STRING= +PACKAGE_BUGREPORT= + ac_unique_file="fondu.c" # Initialize some variables set by options. @@ -144,13 +298,6 @@ oldincludedir='/usr/include' infodir='${prefix}/info' mandir='${prefix}/man' -# Identity of this package. -PACKAGE_NAME= -PACKAGE_TARNAME= -PACKAGE_VERSION= -PACKAGE_STRING= -PACKAGE_BUGREPORT= - ac_prev= for ac_option do @@ -283,7 +430,7 @@ do with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) + | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ @@ -462,7 +609,7 @@ do eval ac_val=$`echo $ac_var` case $ac_val in [\\/$]* | ?:[\\/]* | NONE | '' ) ;; - *) { echo "$as_me: error: expected an absolute path for --$ac_var: $ac_val" >&2 + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 { (exit 1); exit 1; }; };; esac done @@ -474,18 +621,19 @@ do eval ac_val=$`echo $ac_var` case $ac_val in [\\/$]* | ?:[\\/]* ) ;; - *) { echo "$as_me: error: expected an absolute path for --$ac_var: $ac_val" >&2 + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 { (exit 1); exit 1; }; };; esac done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. +# FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias -# FIXME: should be removed in autoconf 3.0. +# FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe @@ -501,13 +649,23 @@ test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null + # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. - ac_prog=$0 - ac_confdir=`echo "$ac_prog" | sed 's%[\\/][^\\/][^\\/]*$%%'` - test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + ac_confdir=`(dirname "$0") 2>/dev/null || +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. @@ -517,10 +675,10 @@ else fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then - { echo "$as_me: error: cannot find sources in $ac_confdir or .." >&2 + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 { (exit 1); exit 1; }; } else - { echo "$as_me: error: cannot find sources in $srcdir" >&2 + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 { (exit 1); exit 1; }; } fi fi @@ -560,7 +718,7 @@ ac_cv_env_CPPFLAGS_value=$CPPFLAGS if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. - cat <<EOF + cat <<_ACEOF \`configure' configures this package to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -581,9 +739,9 @@ Configuration: -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] -EOF +_ACEOF - cat <<EOF + cat <<_ACEOF Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] @@ -610,15 +768,19 @@ Fine tuning of the installation directories: --oldincludedir=DIR C header files for non-gcc [/usr/include] --infodir=DIR info documentation [PREFIX/info] --mandir=DIR man documentation [PREFIX/man] -EOF +_ACEOF + + cat <<\_ACEOF - cat <<\EOF -EOF +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] +_ACEOF fi if test -n "$ac_init_help"; then - cat <<\EOF + cat <<\_ACEOF Some influential environment variables: CC C compiler command @@ -631,40 +793,60 @@ Some influential environment variables: Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. -EOF +_ACEOF fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. ac_popdir=`pwd` - for ac_subdir in : $ac_subdirs_all; do test "x$ac_subdir" = x: && continue - cd $ac_subdir - # A "../" for each directory in /$ac_subdir. - ac_dots=`echo $ac_subdir | - sed 's,^\./,,;s,[^/]$,&/,;s,[^/]*/,../,g'` - - case $srcdir in - .) # No --srcdir option. We are building in place. - ac_sub_srcdir=$srcdir ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_sub_srcdir=$srcdir/$ac_subdir ;; - *) # Relative path. - ac_sub_srcdir=$ac_dots$srcdir/$ac_subdir ;; - esac + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d $ac_dir || continue + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac +# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be +# absolute. +ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` +ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` +ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` +ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` + + cd $ac_dir # Check for guested configure; otherwise get Cygnus style configure. - if test -f $ac_sub_srcdir/configure.gnu; then + if test -f $ac_srcdir/configure.gnu; then echo - $SHELL $ac_sub_srcdir/configure.gnu --help=recursive - elif test -f $ac_sub_srcdir/configure; then + $SHELL $ac_srcdir/configure.gnu --help=recursive + elif test -f $ac_srcdir/configure; then echo - $SHELL $ac_sub_srcdir/configure --help=recursive - elif test -f $ac_sub_srcdir/configure.ac || - test -f $ac_sub_srcdir/configure.in; then + $SHELL $ac_srcdir/configure --help=recursive + elif test -f $ac_srcdir/configure.ac || + test -f $ac_srcdir/configure.in; then echo $ac_configure --help else - echo "$as_me: WARNING: no configuration information is in $ac_subdir" >&2 + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi cd $ac_popdir done @@ -672,31 +854,31 @@ fi test -n "$ac_init_help" && exit 0 if $ac_init_version; then - cat <<\EOF + cat <<\_ACEOF -Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 +Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. -EOF +_ACEOF exit 0 fi exec 5>config.log -cat >&5 <<EOF +cat >&5 <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by $as_me, which was -generated by GNU Autoconf 2.52. Invocation command line was +generated by GNU Autoconf 2.53. Invocation command line was $ $0 $@ -EOF +_ACEOF { cat <<_ASUNAME -## ---------- ## -## Platform. ## -## ---------- ## +## --------- ## +## Platform. ## +## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` @@ -715,17 +897,27 @@ hostinfo = `(hostinfo) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` -PATH = $PATH - _ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" +done + } >&5 -cat >&5 <<EOF -## ------------ ## -## Core tests. ## -## ------------ ## +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF -EOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. @@ -736,15 +928,17 @@ for ac_arg do case $ac_arg in -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) ;; + | --no-cr | --no-c | -n ) continue ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + continue ;; *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` - ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" - ac_sep=" " ;; - *) ac_configure_args="$ac_configure_args$ac_sep$ac_arg" - ac_sep=" " ;; + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" + ac_sep=" " ;; esac # Get rid of the leading space. done @@ -752,14 +946,19 @@ done # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. +# WARNING: Be sure not to use single quotes in there, as some shells, +# such as our DU 5.0 friend, will then `close' the trap. trap 'exit_status=$? # Save into config.log some information that might help in debugging. - echo >&5 - echo "## ----------------- ##" >&5 - echo "## Cache variables. ##" >&5 - echo "## ----------------- ##" >&5 - echo >&5 - # The following way of writing the cache mishandles newlines in values, + { + echo + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, { (set) 2>&1 | case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in @@ -773,21 +972,24 @@ trap 'exit_status=$? "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ;; esac; -} >&5 - sed "/^$/d" confdefs.h >conftest.log - if test -s conftest.log; then - echo >&5 - echo "## ------------ ##" >&5 - echo "## confdefs.h. ##" >&5 - echo "## ------------ ##" >&5 - echo >&5 - cat conftest.log >&5 - fi - (echo; echo) >&5 - test "$ac_signal" != 0 && - echo "$as_me: caught signal $ac_signal" >&5 - echo "$as_me: exit $exit_status" >&5 - rm -rf conftest* confdefs* core core.* *.core conf$$* $ac_clean_files && +} + echo + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + sed "/^$/d" confdefs.h + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 + rm -f core core.* *.core && + rm -rf conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do @@ -800,6 +1002,33 @@ rm -rf conftest* confdefs.h # AIX cpp loses on an empty file, so make sure it contains at least a newline. echo >confdefs.h +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + # Let the site file select an alternate cache file if it wants to. # Prefer explicitly selected file to automatically selected ones. if test -z "$CONFIG_SITE"; then @@ -811,9 +1040,9 @@ if test -z "$CONFIG_SITE"; then fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then - { echo "$as_me:814: loading site script $ac_site_file" >&5 + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 echo "$as_me: loading site script $ac_site_file" >&6;} - cat "$ac_site_file" >&5 + sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done @@ -822,7 +1051,7 @@ if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special # files actually), so we avoid doing that. if test -f "$cache_file"; then - { echo "$as_me:825: loading cache $cache_file" >&5 + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . $cache_file;; @@ -830,7 +1059,7 @@ echo "$as_me: loading cache $cache_file" >&6;} esac fi else - { echo "$as_me:833: creating cache $cache_file" >&5 + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi @@ -846,42 +1075,42 @@ for ac_var in `(set) 2>&1 | eval ac_new_val="\$ac_env_${ac_var}_value" case $ac_old_set,$ac_new_set in set,) - { echo "$as_me:849: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) - { echo "$as_me:853: error: \`$ac_var' was not set in the previous run" >&5 + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:859: error: \`$ac_var' has changed since the previous run:" >&5 + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:861: former value: $ac_old_val" >&5 + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 echo "$as_me: former value: $ac_old_val" >&2;} - { echo "$as_me:863: current value: $ac_new_val" >&5 + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 echo "$as_me: current value: $ac_new_val" >&2;} ac_cache_corrupted=: fi;; esac - # Pass precious variables to config.status. It doesn't matter if - # we pass some twice (in addition to the command line arguments). + # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` - ac_configure_args="$ac_configure_args '$ac_arg'" - ;; - *) ac_configure_args="$ac_configure_args $ac_var=$ac_new_val" - ;; + ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then - { echo "$as_me:882: error: changes in the environment can compromise the build" >&5 + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 echo "$as_me: error: changes in the environment can compromise the build" >&2;} - { { echo "$as_me:884: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} { (exit 1); exit 1; }; } fi @@ -892,26 +1121,22 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -esac -echo "#! $SHELL" >conftest.sh -echo "exit 0" >>conftest.sh -chmod +x conftest.sh -if { (echo "$as_me:904: PATH=\".;.\"; conftest.sh") >&5 - (PATH=".;."; conftest.sh) 2>&5 - ac_status=$? - echo "$as_me:907: \$? = $ac_status" >&5 - (exit $ac_status); }; then - ac_path_separator=';' -else - ac_path_separator=: -fi -PATH_SEPARATOR="$ac_path_separator" -rm -f conftest.sh + + + + + + + + + + + + + + + + ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -921,7 +1146,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 -echo "$as_me:924: checking for $ac_word" >&5 +echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -929,25 +1154,28 @@ else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - ac_save_IFS=$IFS; IFS=$ac_path_separator -ac_dummy="$PATH" -for ac_dir in $ac_dummy; do - IFS=$ac_save_IFS - test -z "$ac_dir" && ac_dir=. - $as_executable_p "$ac_dir/$ac_word" || continue -ac_cv_prog_CC="${ac_tool_prefix}gcc" -echo "$as_me:939: found $ac_dir/$ac_word" >&5 -break +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done done fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:947: result: $CC" >&5 + echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else - echo "$as_me:950: result: no" >&5 + echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -956,7 +1184,7 @@ if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 -echo "$as_me:959: checking for $ac_word" >&5 +echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -964,25 +1192,28 @@ else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else - ac_save_IFS=$IFS; IFS=$ac_path_separator -ac_dummy="$PATH" -for ac_dir in $ac_dummy; do - IFS=$ac_save_IFS - test -z "$ac_dir" && ac_dir=. - $as_executable_p "$ac_dir/$ac_word" || continue -ac_cv_prog_ac_ct_CC="gcc" -echo "$as_me:974: found $ac_dir/$ac_word" >&5 -break +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done done fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - echo "$as_me:982: result: $ac_ct_CC" >&5 + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6 else - echo "$as_me:985: result: no" >&5 + echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -995,7 +1226,7 @@ if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 -echo "$as_me:998: checking for $ac_word" >&5 +echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -1003,25 +1234,28 @@ else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - ac_save_IFS=$IFS; IFS=$ac_path_separator -ac_dummy="$PATH" -for ac_dir in $ac_dummy; do - IFS=$ac_save_IFS - test -z "$ac_dir" && ac_dir=. - $as_executable_p "$ac_dir/$ac_word" || continue -ac_cv_prog_CC="${ac_tool_prefix}cc" -echo "$as_me:1013: found $ac_dir/$ac_word" >&5 -break +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done done fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:1021: result: $CC" >&5 + echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else - echo "$as_me:1024: result: no" >&5 + echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -1030,7 +1264,7 @@ if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 -echo "$as_me:1033: checking for $ac_word" >&5 +echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -1038,25 +1272,28 @@ else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else - ac_save_IFS=$IFS; IFS=$ac_path_separator -ac_dummy="$PATH" -for ac_dir in $ac_dummy; do - IFS=$ac_save_IFS - test -z "$ac_dir" && ac_dir=. - $as_executable_p "$ac_dir/$ac_word" || continue -ac_cv_prog_ac_ct_CC="cc" -echo "$as_me:1048: found $ac_dir/$ac_word" >&5 -break +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done done fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - echo "$as_me:1056: result: $ac_ct_CC" >&5 + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6 else - echo "$as_me:1059: result: no" >&5 + echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -1069,7 +1306,7 @@ fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 -echo "$as_me:1072: checking for $ac_word" >&5 +echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -1078,19 +1315,22 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no - ac_save_IFS=$IFS; IFS=$ac_path_separator -ac_dummy="$PATH" -for ac_dir in $ac_dummy; do - IFS=$ac_save_IFS - test -z "$ac_dir" && ac_dir=. - $as_executable_p "$ac_dir/$ac_word" || continue -if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue -fi -ac_cv_prog_CC="cc" -echo "$as_me:1092: found $ac_dir/$ac_word" >&5 -break +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done done if test $ac_prog_rejected = yes; then @@ -1102,7 +1342,7 @@ if test $ac_prog_rejected = yes; then # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift - set dummy "$ac_dir/$ac_word" ${1+"$@"} + set dummy "$as_dir/$ac_word" ${1+"$@"} shift ac_cv_prog_CC="$@" fi @@ -1111,10 +1351,10 @@ fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:1114: result: $CC" >&5 + echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else - echo "$as_me:1117: result: no" >&5 + echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -1125,7 +1365,7 @@ if test -z "$CC"; then do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:1128: checking for $ac_word" >&5 +echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -1133,25 +1373,28 @@ else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - ac_save_IFS=$IFS; IFS=$ac_path_separator -ac_dummy="$PATH" -for ac_dir in $ac_dummy; do - IFS=$ac_save_IFS - test -z "$ac_dir" && ac_dir=. - $as_executable_p "$ac_dir/$ac_word" || continue -ac_cv_prog_CC="$ac_tool_prefix$ac_prog" -echo "$as_me:1143: found $ac_dir/$ac_word" >&5 -break +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done done fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:1151: result: $CC" >&5 + echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else - echo "$as_me:1154: result: no" >&5 + echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -1164,7 +1407,7 @@ if test -z "$CC"; then do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo "$as_me:1167: checking for $ac_word" >&5 +echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -1172,25 +1415,28 @@ else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else - ac_save_IFS=$IFS; IFS=$ac_path_separator -ac_dummy="$PATH" -for ac_dir in $ac_dummy; do - IFS=$ac_save_IFS - test -z "$ac_dir" && ac_dir=. - $as_executable_p "$ac_dir/$ac_word" || continue -ac_cv_prog_ac_ct_CC="$ac_prog" -echo "$as_me:1182: found $ac_dir/$ac_word" >&5 -break +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done done fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - echo "$as_me:1190: result: $ac_ct_CC" >&5 + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6 else - echo "$as_me:1193: result: no" >&5 + echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -1202,34 +1448,41 @@ fi fi -test -z "$CC" && { { echo "$as_me:1205: error: no acceptable cc found in \$PATH" >&5 -echo "$as_me: error: no acceptable cc found in \$PATH" >&2;} + +test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH" >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH" >&2;} { (exit 1); exit 1; }; } # Provide some information about the compiler. -echo "$as_me:1210:" \ +echo "$as_me:$LINENO:" \ "checking for C compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:1213: \"$ac_compiler --version </dev/null >&5\"") >&5 +{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5 (eval $ac_compiler --version </dev/null >&5) 2>&5 ac_status=$? - echo "$as_me:1216: \$? = $ac_status" >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } -{ (eval echo "$as_me:1218: \"$ac_compiler -v </dev/null >&5\"") >&5 +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5 (eval $ac_compiler -v </dev/null >&5) 2>&5 ac_status=$? - echo "$as_me:1221: \$? = $ac_status" >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } -{ (eval echo "$as_me:1223: \"$ac_compiler -V </dev/null >&5\"") >&5 +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5 (eval $ac_compiler -V </dev/null >&5) 2>&5 ac_status=$? - echo "$as_me:1226: \$? = $ac_status" >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } cat >conftest.$ac_ext <<_ACEOF -#line 1230 "configure" +#line $LINENO "configure" #include "confdefs.h" +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -1243,22 +1496,26 @@ ac_clean_files="$ac_clean_files a.out a.exe" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. -echo "$as_me:1246: checking for C compiler default output" >&5 +echo "$as_me:$LINENO: checking for C compiler default output" >&5 echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6 ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -if { (eval echo "$as_me:1249: \"$ac_link_default\"") >&5 +if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 (eval $ac_link_default) 2>&5 ac_status=$? - echo "$as_me:1252: \$? = $ac_status" >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # Find the output, starting from the most likely. This scheme is # not robust to junk in `.', hence go to wildcards (a.*) only as a last # resort. -for ac_file in `ls a.exe conftest.exe 2>/dev/null; + +# Be careful to initialize this variable, since it used to be cached. +# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. +ac_cv_exeext= +for ac_file in `ls a_out.exe a.exe conftest.exe 2>/dev/null; ls a.out conftest 2>/dev/null; ls a.* conftest.* 2>/dev/null`; do case $ac_file in - *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;; + *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb | *.xSYM ) ;; a.out ) # We found the default executable, but exeext='' is most # certainly right. break;; @@ -1272,34 +1529,34 @@ done else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 -{ { echo "$as_me:1275: error: C compiler cannot create executables" >&5 +{ { echo "$as_me:$LINENO: error: C compiler cannot create executables" >&5 echo "$as_me: error: C compiler cannot create executables" >&2;} { (exit 77); exit 77; }; } fi ac_exeext=$ac_cv_exeext -echo "$as_me:1281: result: $ac_file" >&5 +echo "$as_me:$LINENO: result: $ac_file" >&5 echo "${ECHO_T}$ac_file" >&6 # Check the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. -echo "$as_me:1286: checking whether the C compiler works" >&5 +echo "$as_me:$LINENO: checking whether the C compiler works" >&5 echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 # If not cross compiling, check that we can run a simple program. if test "$cross_compiling" != yes; then if { ac_try='./$ac_file' - { (eval echo "$as_me:1292: \"$ac_try\"") >&5 + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:1295: \$? = $ac_status" >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else - { { echo "$as_me:1302: error: cannot run C compiled programs. + { { echo "$as_me:$LINENO: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'." >&5 echo "$as_me: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'." >&2;} @@ -1307,24 +1564,24 @@ If you meant to cross compile, use \`--host'." >&2;} fi fi fi -echo "$as_me:1310: result: yes" >&5 +echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 rm -f a.out a.exe conftest$ac_cv_exeext ac_clean_files=$ac_clean_files_save # Check the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. -echo "$as_me:1317: checking whether we are cross compiling" >&5 +echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 -echo "$as_me:1319: result: $cross_compiling" >&5 +echo "$as_me:$LINENO: result: $cross_compiling" >&5 echo "${ECHO_T}$cross_compiling" >&6 -echo "$as_me:1322: checking for executable suffix" >&5 -echo $ECHO_N "checking for executable suffix... $ECHO_C" >&6 -if { (eval echo "$as_me:1324: \"$ac_link\"") >&5 +echo "$as_me:$LINENO: checking for suffix of executables" >&5 +echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:1327: \$? = $ac_status" >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will @@ -1340,27 +1597,33 @@ for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do esac done else - { { echo "$as_me:1343: error: cannot compute EXEEXT: cannot compile and link" >&5 -echo "$as_me: error: cannot compute EXEEXT: cannot compile and link" >&2;} + { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link" >&5 +echo "$as_me: error: cannot compute suffix of executables: cannot compile and link" >&2;} { (exit 1); exit 1; }; } fi rm -f conftest$ac_cv_exeext -echo "$as_me:1349: result: $ac_cv_exeext" >&5 +echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 echo "${ECHO_T}$ac_cv_exeext" >&6 rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT -echo "$as_me:1355: checking for object suffix" >&5 -echo $ECHO_N "checking for object suffix... $ECHO_C" >&6 +echo "$as_me:$LINENO: checking for suffix of object files" >&5 +echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 if test "${ac_cv_objext+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line 1361 "configure" +#line $LINENO "configure" #include "confdefs.h" +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -1370,10 +1633,10 @@ main () } _ACEOF rm -f conftest.o conftest.obj -if { (eval echo "$as_me:1373: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:1376: \$? = $ac_status" >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do case $ac_file in @@ -1385,26 +1648,32 @@ done else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 -{ { echo "$as_me:1388: error: cannot compute OBJEXT: cannot compile" >&5 -echo "$as_me: error: cannot compute OBJEXT: cannot compile" >&2;} +{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile" >&5 +echo "$as_me: error: cannot compute suffix of object files: cannot compile" >&2;} { (exit 1); exit 1; }; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi -echo "$as_me:1395: result: $ac_cv_objext" >&5 +echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 echo "${ECHO_T}$ac_cv_objext" >&6 OBJEXT=$ac_cv_objext ac_objext=$OBJEXT -echo "$as_me:1399: checking whether we are using the GNU C compiler" >&5 +echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 if test "${ac_cv_c_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line 1405 "configure" +#line $LINENO "configure" #include "confdefs.h" +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -1417,16 +1686,16 @@ main () } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:1420: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:1423: \$? = $ac_status" >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:1426: \"$ac_try\"") >&5 + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:1429: \$? = $ac_status" >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_compiler_gnu=yes else @@ -1438,21 +1707,27 @@ rm -f conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi -echo "$as_me:1441: result: $ac_cv_c_compiler_gnu" >&5 +echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 GCC=`test $ac_compiler_gnu = yes && echo yes` ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS CFLAGS="-g" -echo "$as_me:1447: checking whether $CC accepts -g" >&5 +echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 if test "${ac_cv_prog_cc_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF -#line 1453 "configure" +#line $LINENO "configure" #include "confdefs.h" +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -1462,16 +1737,16 @@ main () } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:1465: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:1468: \$? = $ac_status" >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:1471: \"$ac_try\"") >&5 + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:1474: \$? = $ac_status" >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_prog_cc_g=yes else @@ -1481,7 +1756,7 @@ ac_cv_prog_cc_g=no fi rm -f conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:1484: result: $ac_cv_prog_cc_g" >&5 +echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS @@ -1508,16 +1783,16 @@ cat >conftest.$ac_ext <<_ACEOF #endif _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:1511: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:1514: \$? = $ac_status" >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:1517: \"$ac_try\"") >&5 + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:1520: \$? = $ac_status" >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then for ac_declaration in \ ''\ @@ -1529,10 +1804,16 @@ if { (eval echo "$as_me:1511: \"$ac_compile\"") >&5 'void exit (int);' do cat >conftest.$ac_ext <<_ACEOF -#line 1532 "configure" +#line $LINENO "configure" #include "confdefs.h" #include <stdlib.h> $ac_declaration +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -1542,16 +1823,16 @@ exit (42); } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:1545: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:1548: \$? = $ac_status" >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:1551: \"$ac_try\"") >&5 + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:1554: \$? = $ac_status" >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else @@ -1561,9 +1842,15 @@ continue fi rm -f conftest.$ac_objext conftest.$ac_ext cat >conftest.$ac_ext <<_ACEOF -#line 1564 "configure" +#line $LINENO "configure" #include "confdefs.h" $ac_declaration +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif int main () { @@ -1573,16 +1860,16 @@ exit (42); } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:1576: \"$ac_compile\"") >&5 +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:1579: \$? = $ac_status" >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:1582: \"$ac_try\"") >&5 + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:1585: \$? = $ac_status" >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then break else @@ -1609,6 +1896,93 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu +ac_aux_dir= +for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f $ac_dir/shtool; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 +echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} + { (exit 1); exit 1; }; } +fi +ac_config_guess="$SHELL $ac_aux_dir/config.guess" +ac_config_sub="$SHELL $ac_aux_dir/config.sub" +ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. + +# Make sure we can run config.sub. +$ac_config_sub sun4 >/dev/null 2>&1 || + { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 +echo "$as_me: error: cannot run $ac_config_sub" >&2;} + { (exit 1); exit 1; }; } + +echo "$as_me:$LINENO: checking build system type" >&5 +echo $ECHO_N "checking build system type... $ECHO_C" >&6 +if test "${ac_cv_build+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_build_alias=$build_alias +test -z "$ac_cv_build_alias" && + ac_cv_build_alias=`$ac_config_guess` +test -z "$ac_cv_build_alias" && + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 +echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } +ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +echo "${ECHO_T}$ac_cv_build" >&6 +build=$ac_cv_build +build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + + +echo "$as_me:$LINENO: checking host system type" >&5 +echo $ECHO_N "checking host system type... $ECHO_C" >&6 +if test "${ac_cv_host+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_host_alias=$host_alias +test -z "$ac_cv_host_alias" && + ac_cv_host_alias=$ac_cv_build_alias +ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +echo "${ECHO_T}$ac_cv_host" >&6 +host=$ac_cv_host +host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + + + +case "$host" in +*-apple-darwin*) + cp Makefile.Mac Makefile + exit 0 + ;; +esac + ac_config_files="$ac_config_files Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure @@ -1691,7 +2065,7 @@ fi # If the first sed substitution is executed (which looks for macros that # take arguments), then we branch to the quote section. Otherwise, # look for a macro that doesn't take arguments. -cat >confdef2opt.sed <<\EOF +cat >confdef2opt.sed <<\_ACEOF t clear : clear s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g @@ -1705,7 +2079,7 @@ s,\[,\\&,g s,\],\\&,g s,\$,$$,g p -EOF +_ACEOF # We use echo to avoid assuming a particular line-breaking character. # The extra dot is to prevent the shell from consuming trailing # line-breaks from the sub-command output. A line-break within @@ -1716,25 +2090,30 @@ ac_LF_and_DOT=`echo; echo .` DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` rm -f confdef2opt.sed + + : ${CONFIG_STATUS=./config.status} ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ echo "$as_me:1722: creating $CONFIG_STATUS" >&5 +{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 echo "$as_me: creating $CONFIG_STATUS" >&6;} cat >$CONFIG_STATUS <<_ACEOF #! $SHELL -# Generated automatically by configure. +# Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false SHELL=\${CONFIG_SHELL-$SHELL} -ac_cs_invocation="\$0 \$@" - _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF + +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh @@ -1743,8 +2122,167 @@ elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi +# NLS nuisances. +# Support unset when possible. +if (FOO=FOO; unset FOO) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + +(set +x; test -n "`(LANG=C; export LANG) 2>&1`") && + { $as_unset LANG || test "${LANG+set}" != set; } || + { LANG=C; export LANG; } +(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") && + { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } || + { LC_ALL=C; export LC_ALL; } +(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") && + { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } || + { LC_TIME=C; export LC_TIME; } +(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") && + { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } || + { LC_CTYPE=C; export LC_CTYPE; } +(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") && + { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } || + { LANGUAGE=C; export LANGUAGE; } +(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") && + { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } || + { LC_COLLATE=C; export LC_COLLATE; } +(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") && + { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } || + { LC_NUMERIC=C; export LC_NUMERIC; } +(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") && + { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } || + { LC_MESSAGES=C; export LC_MESSAGES; } + + # Name of the executable. -as_me=`echo "$0" |sed 's,.*[\\/],,'` +as_me=`(basename "$0") 2>/dev/null || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conftest.sh + echo "exit 0" >>conftest.sh + chmod +x conftest.sh + if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conftest.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr @@ -1772,22 +2310,12 @@ rm -f conf$$ conf$$.exe conf$$.file as_executable_p="test -f" -# Support unset when possible. -if (FOO=FOO; unset FOO) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" -# NLS nuisances. -$as_unset LANG || test "${LANG+set}" != set || { LANG=C; export LANG; } -$as_unset LC_ALL || test "${LC_ALL+set}" != set || { LC_ALL=C; export LC_ALL; } -$as_unset LC_TIME || test "${LC_TIME+set}" != set || { LC_TIME=C; export LC_TIME; } -$as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set || { LC_CTYPE=C; export LC_CTYPE; } -$as_unset LANGUAGE || test "${LANGUAGE+set}" != set || { LANGUAGE=C; export LANGUAGE; } -$as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set || { LC_COLLATE=C; export LC_COLLATE; } -$as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set || { LC_NUMERIC=C; export LC_NUMERIC; } -$as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set || { LC_MESSAGES=C; export LC_MESSAGES; } # IFS # We need space, tab and new line, in precisely that order. @@ -1796,10 +2324,34 @@ as_nl=' IFS=" $as_nl" # CDPATH. -$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=:; export CDPATH; } +$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } exec 6>&1 +# Open the log real soon, to keep \$[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. Logging --version etc. is OK. +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX +} >&5 +cat >&5 <<_CSEOF + +This file was extended by $as_me, which was +generated by GNU Autoconf 2.53. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +_CSEOF +echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +echo >&5 _ACEOF # Files that config.status was made for. @@ -1819,7 +2371,7 @@ if test -n "$ac_config_commands"; then echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS fi -cat >>$CONFIG_STATUS <<\EOF +cat >>$CONFIG_STATUS <<\_ACEOF ac_cs_usage="\ \`$as_me' instantiates files from templates according to the @@ -1838,12 +2390,12 @@ Configuration files: $config_files Report bugs to <bug-autoconf@gnu.org>." -EOF +_ACEOF -cat >>$CONFIG_STATUS <<EOF +cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ config.status -configured by $0, generated by GNU Autoconf 2.52, +configured by $0, generated by GNU Autoconf 2.53, with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 @@ -1851,9 +2403,9 @@ Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." srcdir=$srcdir -EOF +_ACEOF -cat >>$CONFIG_STATUS <<\EOF +cat >>$CONFIG_STATUS <<\_ACEOF # If no file are specified by the user, then we need to provide default # value. By we need to know if files were specified by the user. ac_need_defaults=: @@ -1875,18 +2427,18 @@ do case $1 in # Handling of the options. -EOF -cat >>$CONFIG_STATUS <<EOF +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion" exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;; -EOF -cat >>$CONFIG_STATUS <<\EOF +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF --version | --vers* | -V ) echo "$ac_cs_version"; exit 0 ;; --he | --h) # Conflict between --help and --header - { { echo "$as_me:1889: error: ambiguous option: $1 + { { echo "$as_me:$LINENO: error: ambiguous option: $1 Try \`$0 --help' for more information." >&5 echo "$as_me: error: ambiguous option: $1 Try \`$0 --help' for more information." >&2;} @@ -1905,7 +2457,7 @@ Try \`$0 --help' for more information." >&2;} ac_need_defaults=false;; # This is an error. - -*) { { echo "$as_me:1908: error: unrecognized option: $1 + -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 Try \`$0 --help' for more information." >&5 echo "$as_me: error: unrecognized option: $1 Try \`$0 --help' for more information." >&2;} @@ -1917,31 +2469,19 @@ Try \`$0 --help' for more information." >&2;} shift done -exec 5>>config.log -cat >&5 << _ACEOF +_ACEOF -## ----------------------- ## -## Running config.status. ## -## ----------------------- ## -This file was extended by $as_me 2.52, executed with - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - > $ac_cs_invocation -on `(hostname || uname -n) 2>/dev/null | sed 1q` -_ACEOF -EOF -cat >>$CONFIG_STATUS <<\EOF + +cat >>$CONFIG_STATUS <<\_ACEOF for ac_config_target in $ac_config_targets do case "$ac_config_target" in # Handling of arguments. "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; - *) { { echo "$as_me:1944: error: invalid argument: $ac_config_target" >&5 + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 echo "$as_me: error: invalid argument: $ac_config_target" >&2;} { (exit 1); exit 1; }; };; esac @@ -1977,9 +2517,9 @@ $debug || { (exit 1); exit 1; } } -EOF +_ACEOF -cat >>$CONFIG_STATUS <<EOF +cat >>$CONFIG_STATUS <<_ACEOF # # CONFIG_FILES section. @@ -1992,6 +2532,12 @@ if test -n "\$CONFIG_FILES"; then sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF s,@SHELL@,$SHELL,;t t +s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t s,@exec_prefix@,$exec_prefix,;t t s,@prefix@,$prefix,;t t s,@program_transform_name@,$program_transform_name,;t t @@ -2007,19 +2553,13 @@ s,@includedir@,$includedir,;t t s,@oldincludedir@,$oldincludedir,;t t s,@infodir@,$infodir,;t t s,@mandir@,$mandir,;t t -s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t -s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t -s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t -s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t -s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t s,@build_alias@,$build_alias,;t t s,@host_alias@,$host_alias,;t t s,@target_alias@,$target_alias,;t t +s,@DEFS@,$DEFS,;t t s,@ECHO_C@,$ECHO_C,;t t s,@ECHO_N@,$ECHO_N,;t t s,@ECHO_T@,$ECHO_T,;t t -s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t -s,@DEFS@,$DEFS,;t t s,@LIBS@,$LIBS,;t t s,@CC@,$CC,;t t s,@CFLAGS@,$CFLAGS,;t t @@ -2028,11 +2568,19 @@ s,@CPPFLAGS@,$CPPFLAGS,;t t s,@ac_ct_CC@,$ac_ct_CC,;t t s,@EXEEXT@,$EXEEXT,;t t s,@OBJEXT@,$OBJEXT,;t t +s,@build@,$build,;t t +s,@build_cpu@,$build_cpu,;t t +s,@build_vendor@,$build_vendor,;t t +s,@build_os@,$build_os,;t t +s,@host@,$host,;t t +s,@host_cpu@,$host_cpu,;t t +s,@host_vendor@,$host_vendor,;t t +s,@host_os@,$host_os,;t t CEOF -EOF +_ACEOF - cat >>$CONFIG_STATUS <<\EOF + cat >>$CONFIG_STATUS <<\_ACEOF # Split the substitutions into bite-sized pieces for seds with # small command number limits, like on Digital OSF/1 and HP-UX. ac_max_sed_lines=48 @@ -2071,8 +2619,8 @@ EOF fi fi # test -n "$CONFIG_FILES" -EOF -cat >>$CONFIG_STATUS <<\EOF +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case $ac_file in @@ -2086,7 +2634,8 @@ for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue esac # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. - ac_dir=`$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + ac_dir=`(dirname "$ac_file") 2>/dev/null || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| \ @@ -2097,8 +2646,7 @@ echo X"$ac_file" | /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` - if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then - { case "$ac_dir" in + { case "$ac_dir" in [\\/]* | ?:[\\/]* ) as_incr_dir=;; *) as_incr_dir=.;; esac @@ -2109,43 +2657,64 @@ for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do ?:) as_incr_dir=$as_mkdir_dir ;; *) as_incr_dir=$as_incr_dir/$as_mkdir_dir - test -d "$as_incr_dir" || mkdir "$as_incr_dir" + test -d "$as_incr_dir" || + mkdir "$as_incr_dir" || + { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; } ;; esac done; } - ac_dir_suffix="/`echo $ac_dir|sed 's,^\./,,'`" - # A "../" for each directory in $ac_dir_suffix. - ac_dots=`echo "$ac_dir_suffix" | sed 's,/[^/]*,../,g'` - else - ac_dir_suffix= ac_dots= - fi + ac_builddir=. - case $srcdir in - .) ac_srcdir=. - if test -z "$ac_dots"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_dots | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; *) # Relative path. - ac_srcdir=$ac_dots$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_dots$srcdir ;; - esac + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac +# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be +# absolute. +ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` +ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` +ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` +ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` + + if test x"$ac_file" != x-; then - { echo "$as_me:2140: creating $ac_file" >&5 + { echo "$as_me:$LINENO: creating $ac_file" >&5 echo "$as_me: creating $ac_file" >&6;} rm -f "$ac_file" fi # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: - # /* config.h. Generated automatically by config.status. */ - configure_input="Generated automatically from `echo $ac_file_in | - sed 's,.*/,,'` by configure." + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + configure_input= + else + configure_input="$ac_file. " + fi + configure_input=$configure_input"Generated from `echo $ac_file_in | + sed 's,.*/,,'` by configure." # First look for the input files in the build tree, otherwise in the # src tree. @@ -2155,7 +2724,7 @@ echo "$as_me: creating $ac_file" >&6;} -) echo $tmp/stdin ;; [\\/$]*) # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:2158: error: cannot find input file: $f" >&5 + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } echo $f;; @@ -2168,23 +2737,29 @@ echo "$as_me: error: cannot find input file: $f" >&2;} echo $srcdir/$f else # /dev/null tree - { { echo "$as_me:2171: error: cannot find input file: $f" >&5 + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } fi;; esac done` || { (exit 1); exit 1; } -EOF -cat >>$CONFIG_STATUS <<EOF +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF sed "$ac_vpsub $extrasub -EOF -cat >>$CONFIG_STATUS <<\EOF +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s,@configure_input@,$configure_input,;t t s,@srcdir@,$ac_srcdir,;t t +s,@abs_srcdir@,$ac_abs_srcdir,;t t s,@top_srcdir@,$ac_top_srcdir,;t t +s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +s,@builddir@,$ac_builddir,;t t +s,@abs_builddir@,$ac_abs_builddir,;t t +s,@top_builddir@,$ac_top_builddir,;t t +s,@abs_top_builddir@,$ac_abs_top_builddir,;t t " $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out rm -f $tmp/stdin if test x"$ac_file" != x-; then @@ -2195,15 +2770,16 @@ s,@top_srcdir@,$ac_top_srcdir,;t t fi done -EOF +_ACEOF -cat >>$CONFIG_STATUS <<\EOF +cat >>$CONFIG_STATUS <<\_ACEOF { (exit 0); exit 0; } -EOF +_ACEOF chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save + # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open diff --git a/configure.in b/configure.in index d0aee4a..f7a6290 100644 --- a/configure.in +++ b/configure.in @@ -2,5 +2,13 @@ dnl Process this file with autoconf to produce a configure script. AC_INIT(fondu.c) AC_PROG_CC +AC_CANONICAL_HOST + +case "$host" in +*-apple-darwin*) + cp Makefile.Mac Makefile + exit 0 + ;; +esac AC_OUTPUT(Makefile) @@ -1,142 +1,63 @@ -/* GWW: Taken from lrzsz-0.12.20.tar, an xmodem package */ -/* http://www.ohse.de/uwe/software/lrzsz.html */ -/* - * Crc calculation stuff - */ - -/* crctab calculated by Mark G. Mendel, Network Systems Corporation */ -unsigned short crctab[256] = { - 0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50a5, 0x60c6, 0x70e7, - 0x8108, 0x9129, 0xa14a, 0xb16b, 0xc18c, 0xd1ad, 0xe1ce, 0xf1ef, - 0x1231, 0x0210, 0x3273, 0x2252, 0x52b5, 0x4294, 0x72f7, 0x62d6, - 0x9339, 0x8318, 0xb37b, 0xa35a, 0xd3bd, 0xc39c, 0xf3ff, 0xe3de, - 0x2462, 0x3443, 0x0420, 0x1401, 0x64e6, 0x74c7, 0x44a4, 0x5485, - 0xa56a, 0xb54b, 0x8528, 0x9509, 0xe5ee, 0xf5cf, 0xc5ac, 0xd58d, - 0x3653, 0x2672, 0x1611, 0x0630, 0x76d7, 0x66f6, 0x5695, 0x46b4, - 0xb75b, 0xa77a, 0x9719, 0x8738, 0xf7df, 0xe7fe, 0xd79d, 0xc7bc, - 0x48c4, 0x58e5, 0x6886, 0x78a7, 0x0840, 0x1861, 0x2802, 0x3823, - 0xc9cc, 0xd9ed, 0xe98e, 0xf9af, 0x8948, 0x9969, 0xa90a, 0xb92b, - 0x5af5, 0x4ad4, 0x7ab7, 0x6a96, 0x1a71, 0x0a50, 0x3a33, 0x2a12, - 0xdbfd, 0xcbdc, 0xfbbf, 0xeb9e, 0x9b79, 0x8b58, 0xbb3b, 0xab1a, - 0x6ca6, 0x7c87, 0x4ce4, 0x5cc5, 0x2c22, 0x3c03, 0x0c60, 0x1c41, - 0xedae, 0xfd8f, 0xcdec, 0xddcd, 0xad2a, 0xbd0b, 0x8d68, 0x9d49, - 0x7e97, 0x6eb6, 0x5ed5, 0x4ef4, 0x3e13, 0x2e32, 0x1e51, 0x0e70, - 0xff9f, 0xefbe, 0xdfdd, 0xcffc, 0xbf1b, 0xaf3a, 0x9f59, 0x8f78, - 0x9188, 0x81a9, 0xb1ca, 0xa1eb, 0xd10c, 0xc12d, 0xf14e, 0xe16f, - 0x1080, 0x00a1, 0x30c2, 0x20e3, 0x5004, 0x4025, 0x7046, 0x6067, - 0x83b9, 0x9398, 0xa3fb, 0xb3da, 0xc33d, 0xd31c, 0xe37f, 0xf35e, - 0x02b1, 0x1290, 0x22f3, 0x32d2, 0x4235, 0x5214, 0x6277, 0x7256, - 0xb5ea, 0xa5cb, 0x95a8, 0x8589, 0xf56e, 0xe54f, 0xd52c, 0xc50d, - 0x34e2, 0x24c3, 0x14a0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405, - 0xa7db, 0xb7fa, 0x8799, 0x97b8, 0xe75f, 0xf77e, 0xc71d, 0xd73c, - 0x26d3, 0x36f2, 0x0691, 0x16b0, 0x6657, 0x7676, 0x4615, 0x5634, - 0xd94c, 0xc96d, 0xf90e, 0xe92f, 0x99c8, 0x89e9, 0xb98a, 0xa9ab, - 0x5844, 0x4865, 0x7806, 0x6827, 0x18c0, 0x08e1, 0x3882, 0x28a3, - 0xcb7d, 0xdb5c, 0xeb3f, 0xfb1e, 0x8bf9, 0x9bd8, 0xabbb, 0xbb9a, - 0x4a75, 0x5a54, 0x6a37, 0x7a16, 0x0af1, 0x1ad0, 0x2ab3, 0x3a92, - 0xfd2e, 0xed0f, 0xdd6c, 0xcd4d, 0xbdaa, 0xad8b, 0x9de8, 0x8dc9, - 0x7c26, 0x6c07, 0x5c64, 0x4c45, 0x3ca2, 0x2c83, 0x1ce0, 0x0cc1, - 0xef1f, 0xff3e, 0xcf5d, 0xdf7c, 0xaf9b, 0xbfba, 0x8fd9, 0x9ff8, - 0x6e17, 0x7e36, 0x4e55, 0x5e74, 0x2e93, 0x3eb2, 0x0ed1, 0x1ef0 -}; - -/* - * updcrc macro derived from article Copyright (C) 1986 Stephen Satchell. - * NOTE: First srgument must be in range 0 to 255. - * Second argument is referenced twice. - * - * Programmers may incorporate any or all code into their programs, - * giving proper credit within the source. Publication of the - * source routines is permitted so long as proper credit is given - * to Stephen Satchell, Satchell Evaluations and Chuck Forsberg, - * Omen Technology. - */ - -#define updcrc(cp, crc) ( crctab[((crc >> 8) & 255)] ^ (crc << 8) ^ cp) - -/* - * Copyright (C) 1986 Gary S. Brown. You may use this program, or - * code or tables extracted from it, as desired without restriction. - */ - -/* First, the polynomial itself and its table of feedback terms. The */ -/* polynomial is */ -/* X^32+X^26+X^23+X^22+X^16+X^12+X^11+X^10+X^8+X^7+X^5+X^4+X^2+X^1+X^0 */ -/* Note that we take it "backwards" and put the highest-order term in */ -/* the lowest-order bit. The X^32 term is "implied"; the LSB is the */ -/* X^31 term, etc. The X^0 term (usually shown as "+1") results in */ -/* the MSB being 1. */ - -/* Note that the usual hardware shift register implementation, which */ -/* is what we're using (we're merely optimizing it by doing eight-bit */ -/* chunks at a time) shifts bits into the lowest-order term. In our */ -/* implementation, that means shifting towards the right. Why do we */ -/* do it this way? Because the calculated CRC must be transmitted in */ -/* order from highest-order term to lowest-order term. UARTs transmit */ -/* characters in order from LSB to MSB. By storing the CRC this way, */ -/* we hand it to the UART in the order low-byte to high-byte; the UART */ -/* sends each low-bit to hight-bit; and the result is transmission bit */ -/* by bit from highest- to lowest-order term without requiring any bit */ -/* shuffling on our part. Reception works similarly. */ - -/* The feedback terms table consists of 256, 32-bit entries. Notes: */ -/* */ -/* The table can be generated at runtime if desired; code to do so */ -/* is shown later. It might not be obvious, but the feedback */ -/* terms simply represent the results of eight shift/xor opera- */ -/* tions for all combinations of data and CRC register values. */ -/* */ -/* The values must be right-shifted by eight bits by the "updcrc" */ -/* logic; the shift must be unsigned (bring in zeroes). On some */ -/* hardware you could probably optimize the shift in assembler by */ -/* using byte-swap instructions. */ - -long cr3tab[] = { /* CRC polynomial 0xedb88320 */ -0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3, -0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, -0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de, 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, -0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5, -0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172, 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, -0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59, -0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f, -0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924, 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, -0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433, -0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01, -0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, 0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, -0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65, -0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb, -0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0, 0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, -0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f, -0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad, -0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a, 0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, -0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, -0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7, -0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc, 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, -0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b, -0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79, -0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236, 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, -0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d, -0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713, -0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, 0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, -0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777, -0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45, -0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2, 0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, -0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9, -0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf, -0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94, 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d +/* GWW: taken from http://www.ctan.org/tex-archive/tools/macutils/crc/ */ +/* This is the output (slightly modified) of makecrc for the binhex case */ + +extern unsigned long binhex_crc(unsigned char *buffer,int size); + +static const unsigned long binhex_crcinit = 0; + +static unsigned short crctab[256] = { + 0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50a5, 0x60c6, 0x70e7, + 0x8108, 0x9129, 0xa14a, 0xb16b, 0xc18c, 0xd1ad, 0xe1ce, 0xf1ef, + 0x1231, 0x0210, 0x3273, 0x2252, 0x52b5, 0x4294, 0x72f7, 0x62d6, + 0x9339, 0x8318, 0xb37b, 0xa35a, 0xd3bd, 0xc39c, 0xf3ff, 0xe3de, + 0x2462, 0x3443, 0x0420, 0x1401, 0x64e6, 0x74c7, 0x44a4, 0x5485, + 0xa56a, 0xb54b, 0x8528, 0x9509, 0xe5ee, 0xf5cf, 0xc5ac, 0xd58d, + 0x3653, 0x2672, 0x1611, 0x0630, 0x76d7, 0x66f6, 0x5695, 0x46b4, + 0xb75b, 0xa77a, 0x9719, 0x8738, 0xf7df, 0xe7fe, 0xd79d, 0xc7bc, + 0x48c4, 0x58e5, 0x6886, 0x78a7, 0x0840, 0x1861, 0x2802, 0x3823, + 0xc9cc, 0xd9ed, 0xe98e, 0xf9af, 0x8948, 0x9969, 0xa90a, 0xb92b, + 0x5af5, 0x4ad4, 0x7ab7, 0x6a96, 0x1a71, 0x0a50, 0x3a33, 0x2a12, + 0xdbfd, 0xcbdc, 0xfbbf, 0xeb9e, 0x9b79, 0x8b58, 0xbb3b, 0xab1a, + 0x6ca6, 0x7c87, 0x4ce4, 0x5cc5, 0x2c22, 0x3c03, 0x0c60, 0x1c41, + 0xedae, 0xfd8f, 0xcdec, 0xddcd, 0xad2a, 0xbd0b, 0x8d68, 0x9d49, + 0x7e97, 0x6eb6, 0x5ed5, 0x4ef4, 0x3e13, 0x2e32, 0x1e51, 0x0e70, + 0xff9f, 0xefbe, 0xdfdd, 0xcffc, 0xbf1b, 0xaf3a, 0x9f59, 0x8f78, + 0x9188, 0x81a9, 0xb1ca, 0xa1eb, 0xd10c, 0xc12d, 0xf14e, 0xe16f, + 0x1080, 0x00a1, 0x30c2, 0x20e3, 0x5004, 0x4025, 0x7046, 0x6067, + 0x83b9, 0x9398, 0xa3fb, 0xb3da, 0xc33d, 0xd31c, 0xe37f, 0xf35e, + 0x02b1, 0x1290, 0x22f3, 0x32d2, 0x4235, 0x5214, 0x6277, 0x7256, + 0xb5ea, 0xa5cb, 0x95a8, 0x8589, 0xf56e, 0xe54f, 0xd52c, 0xc50d, + 0x34e2, 0x24c3, 0x14a0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405, + 0xa7db, 0xb7fa, 0x8799, 0x97b8, 0xe75f, 0xf77e, 0xc71d, 0xd73c, + 0x26d3, 0x36f2, 0x0691, 0x16b0, 0x6657, 0x7676, 0x4615, 0x5634, + 0xd94c, 0xc96d, 0xf90e, 0xe92f, 0x99c8, 0x89e9, 0xb98a, 0xa9ab, + 0x5844, 0x4865, 0x7806, 0x6827, 0x18c0, 0x08e1, 0x3882, 0x28a3, + 0xcb7d, 0xdb5c, 0xeb3f, 0xfb1e, 0x8bf9, 0x9bd8, 0xabbb, 0xbb9a, + 0x4a75, 0x5a54, 0x6a37, 0x7a16, 0x0af1, 0x1ad0, 0x2ab3, 0x3a92, + 0xfd2e, 0xed0f, 0xdd6c, 0xcd4d, 0xbdaa, 0xad8b, 0x9de8, 0x8dc9, + 0x7c26, 0x6c07, 0x5c64, 0x4c45, 0x3ca2, 0x2c83, 0x1ce0, 0x0cc1, + 0xef1f, 0xff3e, 0xcf5d, 0xdf7c, 0xaf9b, 0xbfba, 0x8fd9, 0x9ff8, + 0x6e17, 0x7e36, 0x4e55, 0x5e74, 0x2e93, 0x3eb2, 0x0ed1, 0x1ef0, }; -#ifdef NFGM -long -UPDC32(b, c) -long c; +static unsigned long binhex_updcrc(icrc, icp, icnt) + unsigned long icrc; + unsigned char *icp; + int icnt; { - return (cr3tab[((int)c ^ b) & 0xff] ^ ((c >> 8) & 0x00FFFFFF)); -} +#define M1 0xff +#define M2 0xff00 + register unsigned long crc = icrc; + register unsigned char *cp = icp; + register int cnt = icnt; -#else + while(cnt--) { + crc=((crc<<8)&M2)^crctab[((crc>>8)&0xff)^*cp++]; + } -#define UPDC32(b, c) (cr3tab[((int)c ^ b) & 0xff] ^ ((c >> 8) & 0x00FFFFFF)) -#endif + return(crc); +} -/* End of crctab.c */ +unsigned long binhex_crc(unsigned char *buffer,int size) { +return ( binhex_updcrc(binhex_crcinit,buffer,size)); +} diff --git a/dfont2res.c b/dfont2res.c index ec84587..d55f985 100644 --- a/dfont2res.c +++ b/dfont2res.c @@ -38,23 +38,20 @@ static void Usage(char *prog) { exit(0); } -/* MacBinary files use the same CRC that XModem does (in the MacBinary header) */ -/* Taken from zglobal.h in lrzsz-0.12.20.tar, an xmodem package */ -/* http://www.ohse.de/uwe/software/lrzsz.html */ - /* crctab.c */ - extern unsigned short crctab[256]; -# define updcrc(cp, crc) ( crctab[((crc >> 8) & 255)] ^ (crc << 8) ^ cp) - extern long cr3tab[]; -# define UPDC32(b, c) (cr3tab[((int)c ^ b) & 0xff] ^ ((c >> 8) & 0x00FFFFFF)) -/* End of borrowed code */ - -static int crcbuffer(uint8 *buffer,int size) { - int crc = 0, i; - - for ( i=0; size>=2; i+=2, size-=2 ) - crc = updcrc( ((buffer[i]<<8)|buffer[i+1]) , crc ); -return( crc ); -} +/* A MacBinary file */ +/* http://www.lazerware.com/formats/macbinary.html */ +/* begins with a 128 byte header */ +/* (which specifies lengths for data/resource forks) */ +/* (and contains mac type/creator data) */ +/* (and other stuff) */ +/* (and finally a crc checksum) +/* is followed by the data section (padded to a mult of 128 bytes) */ +/* is followed by the resource section (padded to a mult of 128 bytes) */ + +/* Crc code taken from: */ +/* http://www.ctan.org/tex-archive/tools/macutils/crc/ */ +/* MacBinary files use the same CRC that binhex does (in the MacBinary header) */ +extern unsigned long binhex_crc(unsigned char *buffer,int size); static void DumpMacBinaryHeader(FILE *res,struct macbinaryheader *mb) { uint8 header[128], *hpt; char buffer[256], *pt, *dpt; @@ -104,6 +101,9 @@ static void DumpMacBinaryHeader(FILE *res,struct macbinaryheader *mb) { fseek(res,0,SEEK_END); len = ftell(res)-sizeof(header); *hpt++ = len>>24; *hpt++ = len>>16; *hpt++ = len>>8; *hpt++ = len; + /* Pad resource fork to be a multiple of 128 bytes */ + while ( (len&127)!=0 ) + { putc('\0',res); ++len; } /* Creation time, (seconds from 1/1/1904) */ time(&now); @@ -127,7 +127,7 @@ static void DumpMacBinaryHeader(FILE *res,struct macbinaryheader *mb) { header[122] = 130; /* MacBinary version 3, written in (129 is MB2) */ header[123] = 129; /* MacBinary Version 2, needed to read */ - crc = crcbuffer(header,124); + crc = binhex_crc(header,124); header[124] = crc>>8; header[125] = crc; @@ -743,7 +743,7 @@ static int HasResourceFork(char *filename) { FSRef ref; FSSpec spec; short res; - int cnt, ret; + long cnt, ret; FILE *temp; char *buf; @@ -798,7 +798,8 @@ return( false ); return( MightBeTrueType(f,pos,dlen,(char *) header+2)); } } - offset = 128+dlen; + /* 128 bytes for header, then the dlen is padded to a 128 byte boundary */ + offset = 128 + ((dlen+127)&~127); return( IsResourceFork(f,offset)); } diff --git a/frombin.1 b/frombin.1 new file mode 100644 index 0000000..98bfcb8 --- /dev/null +++ b/frombin.1 @@ -0,0 +1,17 @@ +.TH FROMBIN 1 "21 December 2002" +.SH NAME +frombin \- convert macbinary files into normal files +.SH SYNOPSIS +.B frombin +.BR macbinaryfile ... +.SH DESCRIPTION +The program +.B frombin +reads a series of macbinary files and unwraps them. On the mac it will produce +a file similar to the original one. On non-macs it will create (up to) three files, +one for the data fork (called <filename>.data), one for the resource fork (called +<filename>.rsrc) and one containing random information in a human readable format +(called <filename>.info). +.SH AUTHOR +George Williams (gww@silcom.com). +.\" end of manual page diff --git a/frommacbinary.c b/frommacbinary.c new file mode 100644 index 0000000..4424dfa --- /dev/null +++ b/frommacbinary.c @@ -0,0 +1,209 @@ +/* Copyright (C) 2002 by George Williams */ +/* + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + + * The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO + * EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; + * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF + * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <stdio.h> +#include <string.h> +#include <stdlib.h> +#include <time.h> +#include <unistd.h> + +#if __Mac +# include <CoreServices.h> /* -I/Developer/Headers/FlatCarbon/ */ +#endif + +/* A MacBinary file */ +/* http://www.lazerware.com/formats/macbinary.html */ +/* begins with a 128 byte header */ +/* (which specifies lengths for data/resource forks) */ +/* (and contains mac type/creator data) */ +/* (and other stuff) */ +/* (and finally a crc checksum) +/* is followed by the data section (padded to a mult of 128 bytes) */ +/* is followed by the resource section (padded to a mult of 128 bytes) */ + +/* Crc code taken from: */ +/* http://www.ctan.org/tex-archive/tools/macutils/crc/ */ +/* MacBinary files use the same CRC that binhex does (in the MacBinary header) */ +extern unsigned long binhex_crc(unsigned char *buffer,int size); + + + +/* frombin filenames */ + +static void Usage(char *prog) { + fprintf( stderr, "Usage: %s [-usage] [-help] [-version] filenames\n" ); + fprintf( stderr, " -usage\t\tPrints this message\n" ); + fprintf( stderr, " -help\t\tPrints this message\n" ); + fprintf( stderr, " -version\t\tPrints the version of the program\n" ); + fprintf( stderr, "Takes a list of macbinary filenames and extracts the contents\n" ); + fprintf( stderr, " on the mac it creates the obvious file.\n" ); + fprintf( stderr, " on non-mac systems it will create up to three files for each input file\n"); + fprintf( stderr, " *.info contains some mac specific data\n" ); + fprintf( stderr, " *.data contains the data fork (if present)\n" ); + fprintf( stderr, " *.rsrc contains the resource fork (if present)\n" ); + exit( 1 ); +} + +static void ProcessFile(char *filename) { + FILE *binfile; + unsigned char header[128]; + char name[80]; + int dlen, rlen; + int i,ch; + + binfile = fopen(filename,"r"); + if ( binfile==NULL ) { + fprintf( stderr, "Cannot open %s\n", filename); +return; + } + fread(header,1,sizeof(header),binfile); + if ( header[0]!=0 || header[74]!=0 || header[82]!=0 || header[1]<=0 || + header[1]>33 || header[63]!=0 || header[2+header[1]]!=0 ) { + fprintf( stderr, "%s does not look like a macbinary file\n", filename ); + fclose(binfile); +return; + } + strncpy(name,(char *) header+2,header[1]); + name[header[1]] = '\0'; + dlen = ((header[0x53]<<24)|(header[0x54]<<16)|(header[0x55]<<8)|header[0x56]); + rlen = ((header[0x57]<<24)|(header[0x58]<<16)|(header[0x59]<<8)|header[0x5a]); + fprintf( stderr, " %s => %s, dfork len=%d rfork len=%d\n", filename, name, dlen, rlen ); +#ifndef __Mac + { + FILE *datafile, *resfile, *infofile; + + if ( dlen>0 ) { + fseek(binfile,128,SEEK_SET); + strcpy(name+header[1],".data"); + datafile = fopen(name,"w"); + if ( datafile==NULL ) + fprintf( stderr, "Cannot open output file: %s\n", name ); + else { + for ( i=0; i<dlen && (ch=getc(binfile))!=EOF; ++i ) + putc(ch,datafile); + fclose(datafile); + } + } + + if ( rlen>0 ) { + fseek(binfile,128 + ((dlen+127)&~127),SEEK_SET); + strcpy(name+header[1],".rsrc"); + resfile = fopen(name,"w"); + if ( resfile==NULL ) + fprintf( stderr, "Cannot open output file: %s\n", name ); + else { + for ( i=0; i<rlen && (ch=getc(binfile))!=EOF; ++i ) + putc(ch,resfile); + fclose(resfile); + } + } + + strcpy(name+header[1],".info"); + infofile = fopen(name,"w"); + if ( infofile==NULL ) { + fprintf( stderr, "Cannot open output file: %s\n", name ); + } else { + name[header[1]] = '\0'; + fprintf( infofile, "Mac filename = %s\n", name ); + fprintf( infofile, "Data fork length = %d\n", dlen ); + fprintf( infofile, "Resource fork length = %d\n", rlen ); + fprintf( infofile, "File Type = %c%c%c%c\n", + header[65], header[66], header[67], header[68]); + fprintf( infofile, "File Creator = %c%c%c%c\n", + header[69], header[70], header[71], header[72]); + fprintf( infofile, "Finder Flags = %08x\n", + header[73]); + fclose( infofile ); + } + } +#else /* __Mac */ + { + FILE *file; + FSRef ref; + FSSpec spec; + int creator, type; + long len; + short macfile; + unsigned char *buf; + + file = fopen( name,"w"); + if ( file==NULL ) + fprintf(stderr, "Cannot open output file: %s\n", name ); + else { + /* First the data fork */ + fseek(binfile,128,SEEK_SET); + for ( i=0; i<dlen && (ch=getc(binfile))!=EOF; ++i ) + putc(ch,file); + fclose(file); + + /* Then the resource fork */ + creator = (header[65]<<24)|(header[66]<<16)|(header[67]<<8)|header[68]; + type = (header[69]<<24)|(header[70]<<16)|(header[71]<<8)|header[72]; + if ( FSPathMakeRef( (unsigned char *) name,&ref,NULL)==noErr && + FSGetCatalogInfo(&ref,0,NULL,NULL,&spec,NULL)==noErr ) { + FSpCreateResFile(&spec,creator,type,smSystemScript); + if ( FSpOpenRF(&spec,fsWrPerm,&macfile)==noErr ) { + SetEOF(macfile,0); /* Truncate it just in case it existed... */ + fseek(binfile,128 + ((dlen+127)&~127),SEEK_SET); + buf = malloc(8*1024); + for ( i=0; i<rlen && (len=fread(buf,1,8*1024,binfile))>0 ; i+= len ) { + if ( i+len>rlen ) + len = rlen-i; + FSWrite(macfile,&len,buf); + } + FSClose(macfile); + free(buf); + } + } + } + } +#endif + fclose(binfile); +} + +int main( int argc, char **argv) { + int i; + + for ( i=1; i<argc; ++i ) { + if ( *argv[i]=='-' ) { + char *pt = argv[i]+1; + if ( *pt=='-' ) ++pt; + if ( strcmp(pt,"usage")==0 || strcmp(pt,"help")==0 ) + Usage(argv[0]); + else if ( strcmp(pt,"version")==0 ) { + printf( "frombin v1.0\n" ); + exit( 0 ); + } else { + fprintf( stderr, "Unrecognized argument %s\n", argv[i]); + Usage(argv[0]); + } + } else { + ProcessFile(argv[i]); + } + } +return( 0 ); +} diff --git a/install-sh b/install-sh new file mode 100755 index 0000000..e9de238 --- /dev/null +++ b/install-sh @@ -0,0 +1,251 @@ +#!/bin/sh +# +# install - install a program, script, or datafile +# This comes from X11R5 (mit/util/scripts/install.sh). +# +# Copyright 1991 by the Massachusetts Institute of Technology +# +# Permission to use, copy, modify, distribute, and sell this software and its +# documentation for any purpose is hereby granted without fee, provided that +# the above copyright notice appear in all copies and that both that +# copyright notice and this permission notice appear in supporting +# documentation, and that the name of M.I.T. not be used in advertising or +# publicity pertaining to distribution of the software without specific, +# written prior permission. M.I.T. makes no representations about the +# suitability of this software for any purpose. It is provided "as is" +# without express or implied warranty. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. It can only install one file at a time, a restriction +# shared with many OS's install programs. + + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" + + +# put in absolute paths if you don't have them in your path; or use env. vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +transformbasename="" +transform_arg="" +instcmd="$mvprog" +chmodcmd="$chmodprog 0755" +chowncmd="" +chgrpcmd="" +stripcmd="" +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src="" +dst="" +dir_arg="" + +while [ x"$1" != x ]; do + case $1 in + -c) instcmd="$cpprog" + shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + -s) stripcmd="$stripprog" + shift + continue;; + + -t=*) transformarg=`echo $1 | sed 's/-t=//'` + shift + continue;; + + -b=*) transformbasename=`echo $1 | sed 's/-b=//'` + shift + continue;; + + *) if [ x"$src" = x ] + then + src=$1 + else + # this colon is to work around a 386BSD /bin/sh bug + : + dst=$1 + fi + shift + continue;; + esac +done + +if [ x"$src" = x ] +then + echo "install: no input file specified" + exit 1 +else + true +fi + +if [ x"$dir_arg" != x ]; then + dst=$src + src="" + + if [ -d $dst ]; then + instcmd=: + chmodcmd="" + else + instcmd=mkdir + fi +else + +# Waiting for this to be detected by the "$instcmd $src $dsttmp" command +# might cause directories to be created, which would be especially bad +# if $src (and thus $dsttmp) contains '*'. + + if [ -f $src -o -d $src ] + then + true + else + echo "install: $src does not exist" + exit 1 + fi + + if [ x"$dst" = x ] + then + echo "install: no destination specified" + exit 1 + else + true + fi + +# If destination is a directory, append the input filename; if your system +# does not like double slashes in filenames, you may need to add some logic + + if [ -d $dst ] + then + dst="$dst"/`basename $src` + else + true + fi +fi + +## this sed command emulates the dirname command +dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` + +# Make sure that the destination directory exists. +# this part is taken from Noah Friedman's mkinstalldirs script + +# Skip lots of stat calls in the usual case. +if [ ! -d "$dstdir" ]; then +defaultIFS=' +' +IFS="${IFS-${defaultIFS}}" + +oIFS="${IFS}" +# Some sh's can't handle IFS=/ for some reason. +IFS='%' +set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` +IFS="${oIFS}" + +pathcomp='' + +while [ $# -ne 0 ] ; do + pathcomp="${pathcomp}${1}" + shift + + if [ ! -d "${pathcomp}" ] ; + then + $mkdirprog "${pathcomp}" + else + true + fi + + pathcomp="${pathcomp}/" +done +fi + +if [ x"$dir_arg" != x ] +then + $doit $instcmd $dst && + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi +else + +# If we're going to rename the final executable, determine the name now. + + if [ x"$transformarg" = x ] + then + dstfile=`basename $dst` + else + dstfile=`basename $dst $transformbasename | + sed $transformarg`$transformbasename + fi + +# don't allow the sed command to completely eliminate the filename + + if [ x"$dstfile" = x ] + then + dstfile=`basename $dst` + else + true + fi + +# Make a temp file name in the proper directory. + + dsttmp=$dstdir/#inst.$$# + +# Move or copy the file name to the temp name + + $doit $instcmd $src $dsttmp && + + trap "rm -f ${dsttmp}" 0 && + +# and set any options; do chmod last to preserve setuid bits + +# If any of these fail, we abort the whole thing. If we want to +# ignore errors from any of these, just make sure not to ignore +# errors from the above "$doit $instcmd $src $dsttmp" command. + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && + +# Now rename the file to the real destination. + + $doit $rmcmd -f $dstdir/$dstfile && + $doit $mvcmd $dsttmp $dstdir/$dstfile + +fi && + + +exit 0 @@ -529,7 +529,7 @@ static int HasResourceFork(char *filename) { FSRef ref; FSSpec spec; short res; - int cnt, ret; + long cnt; int ret; FILE *temp; char *buf; @@ -0,0 +1,36 @@ +.TH FROMBIN 1 "21 December 2002" +.SH NAME +tobin \- convert a series of files into a series of macbinary files +.SH SYNOPSIS +.B tobin +.RB [ \-res filename ] +.RB [ \-type 4-character-string ] +.RB [ \-creator 4-character-string ] +.BR file ... +.SH DESCRIPTION +The program +.B tobin +reads a series of files and wraps them up in a macbinary wrapper. +On the mac it read the resource fork and file create/type flags from the +filesystem (as one would expect). +On non-mac systems (where these concepts do not exist) you may specify these +on the command line with options. +.SH OPTIONS +.TP +.B \-res filename +Specify the name of a file from which a "resource fork" should be read. This argument should +precede the data file with which it is associated (if you want a file with no +data fork, you may omit the data file). +.TP +.B \-type 4-character-string +Specify the a mac 4 character type string used to tell the finder what kind of +file it is. This argument should +precede the data or resource file with which it is associated. +.TP +.B \-creator 4-character-string +Specify the a mac 4 character type string used to tell the finder what application +is associated with this file. This argument should +precede the data or resource file with which it is associated. +.SH AUTHOR +George Williams (gww@silcom.com). +.\" end of manual page diff --git a/tomacbinary.c b/tomacbinary.c new file mode 100644 index 0000000..d5f0420 --- /dev/null +++ b/tomacbinary.c @@ -0,0 +1,366 @@ +/* Copyright (C) 2002 by George Williams */ +/* + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + + * The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO + * EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; + * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF + * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <stdio.h> +#include <string.h> +#include <stdlib.h> +#include <time.h> +#include <unistd.h> + +#if __Mac +# include <CoreServices.h> /* -I/Developer/Headers/FlatCarbon/ */ +#endif + +/* A MacBinary file */ +/* http://www.lazerware.com/formats/macbinary.html */ +/* begins with a 128 byte header */ +/* (which specifies lengths for data/resource forks) */ +/* (and contains mac type/creator data) */ +/* (and other stuff) */ +/* (and finally a crc checksum) +/* is followed by the data section (padded to a mult of 128 bytes) */ +/* is followed by the resource section (padded to a mult of 128 bytes) */ + +/* Crc code taken from: */ +/* http://www.ctan.org/tex-archive/tools/macutils/crc/ */ +/* MacBinary files use the same CRC that binhex does (in the MacBinary header) */ +extern unsigned long binhex_crc(unsigned char *buffer,int size); + + + +/* tobin [-res rfilename] filename {[-res filename] rfilename} */ +/* tobin filename -res rfilename */ +/* tobin -res rfilename */ + +static void Usage(char *prog) { + fprintf( stderr, "Usage: %s {[-res filename] [-create creat] [-type type] [filename]}\n" ); + fprintf( stderr, " -res filename\tProvides the name of a file whose data fork is to\n" ); + fprintf( stderr, "\t\t\tplaced in a resource fork\n" ); + fprintf( stderr, " -create creat\tProvides a four character creator (if omitted on the\n" ); + fprintf( stderr, "\t\t\tmac this will be read from the datafile.\n" ); + fprintf( stderr, " -type type\tProvides a four character type (if omitted on the\n" ); + fprintf( stderr, "\t\t\tmac this will be read from the datafile.\n" ); + fprintf( stderr, "Takes a list of filenames and perhaps a list of resource forks\n" ); + fprintf( stderr, "and puts the result into a list of macbinary files.\n" ); + fprintf( stderr, "On the mac, if no resource fork file is specified and the datafork\n" ); + fprintf( stderr, "file contains a resource fork, then it will be used as the resource\n" ); + fprintf( stderr, "fork.\n" ); + fprintf( stderr, "If no data filename is specified then the resource file will be\n" ); + fprintf( stderr, "placed in the macbinary file without a data fork.\n" ); + fprintf( stderr, "The output filename will be the name of the data fork file with .bin\n" ); + fprintf( stderr, "appended, or if there is no data fork file, then the resource fork file\n" ); + fprintf( stderr, "with .bin appended.\n" ); + exit( 1 ); +} + +static FILE *ResForkOfDataFile(char *dataname) { +#if __Mac + /* copy the resource fork of dataname (if any) into the data fork of a temp file */ + FSRef ref; + FSSpec spec; + short res, err; + long cnt; + FILE *temp; + unsigned char *buf; + + if ( dataname==NULL ) +return( NULL ); + if ( FSPathMakeRef( (unsigned char *) dataname,&ref,NULL)!=noErr ) +return( NULL ); + if ( FSGetCatalogInfo(&ref,0,NULL,NULL,&spec,NULL)!=noErr ) +return( NULL ); + if ( FSpOpenRF(&spec,fsRdPerm,&res)!=noErr ) +return( NULL ); + temp = tmpfile(); + buf = malloc(8192); + while ( 1 ) { + cnt = 8192; + err = FSRead(res,&cnt,buf); + if ( cnt>0 ) + fwrite(buf,1,cnt,temp); + if ( err==eofErr ) + break; + if ( err!=noErr ) + break; + } + free(buf); + FSClose(res); + rewind(temp); +return( temp ); +#else +return( NULL ); +#endif +} + +static void FindTypeCreater(char *dataname,char **create,char **type) { +#if __Mac + static char cbuf[5], tbuf[5]; + FSRef ref; + FSSpec spec; + FInfo info; + + if ( dataname==NULL ) +return; + if ( FSPathMakeRef( (unsigned char *) dataname,&ref,NULL)!=noErr ) +return; + if ( FSGetCatalogInfo(&ref,0,NULL,NULL,&spec,NULL)!=noErr ) +return; + if ( FSpGetFInfo(&spec,&info)!=noErr ) +return; + if ( *type==NULL ) { + tbuf[0] = info.fdType>>24; + tbuf[1] = info.fdType>>16; + tbuf[2] = info.fdType>>8; + tbuf[3] = info.fdType; + tbuf[4] = '\0'; + *type = tbuf; + } + if ( *create==NULL ) { + cbuf[0] = info.fdCreator>>24; + cbuf[1] = info.fdCreator>>16; + cbuf[2] = info.fdCreator>>8; + cbuf[3] = info.fdCreator; + cbuf[4] = '\0'; + *create = cbuf; + } +#else + static char tbuf[5]; + int len = strlen(dataname); + if ( *type==NULL ) { + if (( len>4 && strcmp(dataname+len-4,".txt")==0 ) || + ( len>4 && strcmp(dataname+len-4,".TXT")==0 ) || + ( len>5 && strcmp(dataname+len-5,".text")==0 ) || + ( len>5 && strcmp(dataname+len-5,".TEXT")==0 )) { + strcpy(tbuf,"TEXT"); + *type = tbuf; + } + } +#endif +} + +static void Dump(char *dataname, char *resname, char *create, char *type) { + FILE *datafile=NULL, *resfile=NULL, *outfile; + char *outname; + unsigned char header[128], *hpt; char *pt, *ept; + time_t now; + unsigned long dlen, rlen; + int i,crc, ch; + + if ( dataname==NULL && resname==NULL ) +return; + if ( dataname!=NULL ) { + datafile = fopen(dataname,"r"); + if ( datafile==NULL ) { + fprintf(stderr,"Can't open %s for reading\n", dataname ); +exit(1); + } + FindTypeCreater(dataname,&create,&type); + } + if ( resname!=NULL ) { + resfile = fopen(resname,"r"); + if ( resfile==NULL ) { + fprintf(stderr,"Can't open %s for reading\n", resname ); +exit(1); + } + } else + resfile = ResForkOfDataFile(dataname); + + if ( dataname!=NULL ) { + outname = malloc(strlen(dataname)+30); + strcpy(outname,dataname); + strcat(outname,".bin"); + } else { + outname = malloc(strlen(resname)+30); + strcpy(outname,resname); + strcat(outname,".bin"); + } + outfile = fopen(outname,"w"); + if ( outfile==NULL ) { + fprintf( stderr, "Cannot open %s for writing\n", outname); + free(outname); + if ( datafile ) fclose(datafile); + if ( resfile ) fclose(resfile); + } + + memset(header,'\0',sizeof(header)); + hpt = header; + *hpt++ = '\0'; /* version number */ + /* Mac Filename */ + pt = dataname?dataname:resname; + ept = strrchr(pt,'/'); + if ( ept!=NULL ) pt = ept+1; + ept = pt+strlen(pt); + if ( ept-pt>63 ) ept=pt+63; + *hpt++ = ept-pt; + while ( pt<ept ) + *hpt++ = *pt++; + while ( hpt<header+65 ) + *hpt++ = '\0'; + + if ( type==NULL ) type = "\0\0\0\0"; + if ( create==NULL ) create = "\0\0\0\0"; + /* Mac File Type */ + *hpt++ = type[0]; *hpt++ = type[1]; *hpt++ = type[2]; *hpt++ = type[3]; + /* Mac Creator */ + *hpt++ = create[0]; *hpt++ = create[1]; *hpt++ = create[2]; *hpt++ = create[3]; + *hpt++ = '\0'; /* No finder flags set */ + *hpt++ = '\0'; /* (byte 74) MBZ */ + *hpt++ = '\0'; *hpt++ = '\0'; /* Vert Position in folder */ + *hpt++ = '\0'; *hpt++ = '\0'; /* Hor Position in folder */ + *hpt++ = '\0'; *hpt++ = '\0'; /* window or folder id??? */ + *hpt++ = '\0'; /* protected bit ??? */ + *hpt++ = '\0'; /* (byte 82) MBZ */ + + dlen = rlen = 0; + if ( datafile!=NULL ) { + fseek(datafile,0,SEEK_END); + dlen = ftell(datafile); + fseek(datafile,0,SEEK_SET); + } + if ( resfile!=NULL ) { + fseek(resfile,0,SEEK_END); + rlen = ftell(resfile); + fseek(resfile,0,SEEK_SET); + } + /* Data fork length */ + *hpt++ = dlen>>24; *hpt++ = dlen>>16; *hpt++ = dlen>>8; *hpt++ = dlen; + /* Resource fork length */ + *hpt++ = rlen>>24; *hpt++ = rlen>>16; *hpt++ = rlen>>8; *hpt++ = rlen; + + /* Creation time, (seconds from 1/1/1904) */ + time(&now); + /* convert from 1970 based time to 1904 based time */ + now += (1970-1904)*365L*24*60*60; + for ( i=1904; i<1970; i+=4 ) + now += 24*60*60; + /* Ignore any leap seconds */ + *hpt++ = now>>24; *hpt++ = now>>16; *hpt++ = now>>8; *hpt++ = now; + /* Modification time, (seconds from 1/1/1904) */ + *hpt++ = now>>24; *hpt++ = now>>16; *hpt++ = now>>8; *hpt++ = now; + + *hpt++ = '\0'; *hpt++ = '\0'; /* Get Info comment length */ + *hpt++ = 0; /* More finder flags */ + +/* MacBinary 3 */ + memcpy(header+102,"mBIN",4); + header[106] = 0; /* Script. I assume 0 is latin */ + header[107] = 0; /* extended finder flags */ +/* End of MacBinary 3 */ + header[122] = 130; /* MacBinary version 3, written in (129 is MB2) */ + header[123] = 129; /* MacBinary Version 2, needed to read */ + + crc = binhex_crc(header,124); + header[124] = crc>>8; + header[125] = crc; + + fwrite(header,1,sizeof(header),outfile); + if ( datafile ) { + while ( (ch=getc(datafile))!=EOF ) + putc(ch,outfile); + while ( (dlen&127)!=0 ) + { putc('\0',outfile); ++dlen; } + fclose(datafile); + } + if ( resfile ) { + while ( (ch=getc(resfile))!=EOF ) + putc(ch,outfile); + while ( (rlen&127)!=0 ) + { putc('\0',outfile); ++rlen; } + fclose(resfile); + } +} + +int main( int argc, char **argv) { + int i; + char *datafork=NULL, *resfork=NULL; + char *create=NULL, *type=NULL; /* these are sticky */ + + for ( i=1; i<argc; ++i ) { + if ( *argv[i]=='-' ) { + char *pt = argv[i]+1; + if ( *pt=='-' ) ++pt; + if ( strcmp(pt,"usage")==0 || strcmp(pt,"help")==0 ) + Usage(argv[0]); + else if ( strcmp(pt,"version")==0 ) { + printf( "tobin v1.0\n" ); + exit( 0 ); + } else if ( strcmp(pt,"create")==0 || strcmp(pt,"creator")==0 || strcmp(pt,"creater")==0 || strcmp(pt,"c")==0 ) { + if ( i+1>=argc ) { + fprintf( stderr, "%s must be followed by a filename\n", argv[i] ); + exit( 1 ); + } + if ( strlen(argv[i+1])!=4 ) { + fprintf( stderr, "the argument of %s must be four characters, but %s is not.\n", + argv[i], argv[i+1] ); +exit( 0 ); + } else + create = argv[++i]; + } else if ( strcmp(pt,"type")==0 || strcmp(pt,"t")==0 ) { + if ( i+1>=argc ) { + fprintf( stderr, "%s must be followed by a filename\n", argv[i] ); + exit( 1 ); + } + if ( strlen(argv[i+1])!=4 ) { + fprintf( stderr, "the argument of %s must be four characters, but %s is not.\n", + argv[i], argv[i+1] ); +exit( 0 ); + } else + type = argv[++i]; + } else if ( strcmp(pt,"res")==0 || strcmp(pt,"rsrc")==0 || strcmp(pt,"resource")==0 || strcmp(pt,"r")==0 ) { + if ( i+1>=argc ) { + fprintf( stderr, "%s must be followed by a filename\n", argv[i] ); + exit( 1 ); + } + if ( resfork!=NULL ) { + Dump(datafork,resfork,create,type); + datafork = NULL; + resfork = argv[++i]; + } else if ( datafork!=NULL ) { + Dump(datafork,argv[++i],create,type); + datafork = NULL; + } else + resfork = argv[++i]; + } else { + fprintf( stderr, "Unrecognized argument %s\n", argv[i]); + Usage(argv[0]); + } + } else { + if ( datafork!=NULL ) { + Dump(datafork,resfork,create,type); + datafork = argv[i]; + resfork = NULL; + } else if ( resfork!=NULL ) { + Dump(argv[i],resfork,create,type); + resfork = NULL; + } else + datafork = argv[i]; + } + } + if ( datafork!=NULL || resfork!=NULL ) + Dump(datafork,resfork,create,type); +return( 0 ); +} @@ -576,23 +576,20 @@ static void DumpResourceMap(FILE *res,struct resourcetype *rtypes) { putlong(mend-rend,res); /* length of map section */ } -/* MacBinary files use the same CRC that XModem does (in the MacBinary header) */ -/* Taken from zglobal.h in lrzsz-0.12.20.tar, an xmodem package */ -/* http://www.ohse.de/uwe/software/lrzsz.html */ - /* crctab.c */ - extern unsigned short crctab[256]; -# define updcrc(cp, crc) ( crctab[((crc >> 8) & 255)] ^ (crc << 8) ^ cp) - extern long cr3tab[]; -# define UPDC32(b, c) (cr3tab[((int)c ^ b) & 0xff] ^ ((c >> 8) & 0x00FFFFFF)) -/* End of borrowed code */ - -static int crcbuffer(uint8 *buffer,int size) { - int crc = 0, i; - - for ( i=0; size>=2; i+=2, size-=2 ) - crc = updcrc( ((buffer[i]<<8)|buffer[i+1]) , crc ); -return( crc ); -} +/* A MacBinary file */ +/* http://www.lazerware.com/formats/macbinary.html */ +/* begins with a 128 byte header */ +/* (which specifies lengths for data/resource forks) */ +/* (and contains mac type/creator data) */ +/* (and other stuff) */ +/* (and finally a crc checksum) +/* is followed by the data section (padded to a mult of 128 bytes) */ +/* is followed by the resource section (padded to a mult of 128 bytes) */ + +/* Crc code taken from: */ +/* http://www.ctan.org/tex-archive/tools/macutils/crc/ */ +/* MacBinary files use the same CRC that binhex does (in the MacBinary header) */ +extern unsigned long binhex_crc(unsigned char *buffer,int size); static void DumpMacBinaryHeader(FILE *res,struct macbinaryheader *mb) { uint8 header[128], *hpt; char buffer[256], *pt, *dpt; @@ -642,6 +639,9 @@ static void DumpMacBinaryHeader(FILE *res,struct macbinaryheader *mb) { fseek(res,0,SEEK_END); len = ftell(res)-sizeof(header); *hpt++ = len>>24; *hpt++ = len>>16; *hpt++ = len>>8; *hpt++ = len; + /* Pad resource fork to be a multiple of 128 bytes */ + while ( (len&127)!=0 ) + { putc('\0',res); ++len; } /* Creation time, (seconds from 1/1/1904) */ time(&now); @@ -665,7 +665,7 @@ static void DumpMacBinaryHeader(FILE *res,struct macbinaryheader *mb) { header[122] = 130; /* MacBinary version 3, written in (129 is MB2) */ header[123] = 129; /* MacBinary Version 2, needed to read */ - crc = crcbuffer(header,124); + crc = binhex_crc(header,124); header[124] = crc>>8; header[125] = crc; |