diff options
Diffstat (limited to 'include/vdpau/vdpau.h')
| -rw-r--r-- | include/vdpau/vdpau.h | 329 |
1 files changed, 328 insertions, 1 deletions
diff --git a/include/vdpau/vdpau.h b/include/vdpau/vdpau.h index b386825..249fb71 100644 --- a/include/vdpau/vdpau.h +++ b/include/vdpau/vdpau.h @@ -6,7 +6,7 @@ /* * This copyright notice applies to this header file: * - * Copyright (c) 2008-2010 NVIDIA Corporation + * Copyright (c) 2008-2015 NVIDIA Corporation * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation @@ -432,6 +432,26 @@ * Include all slices beginning with start codes 0x000001B6. The slice start * code must be included for all slices. * + * \subsection bitstream_hevc H.265/HEVC - High Efficiency Video Codec + * + * Include all video coding layer (VCL) NAL units, with nal_unit_type values + * of 0 (TRAIL_N) through 31 (RSV_VCL31) inclusive. In addition to parsing + * and providing NAL units, an H.265/HEVC decoder application using VDPAU + * for decoding must parse certain values of the first slice segment header + * in a VCL NAL unit and provide it through VdpPictureInfoHEVC. Please see + * the documentation for VdpPictureInfoHEVC below for further details. + * + * The complete slice start code (including the 0x000001 prefix) must be + * included for all slices, even when the prefix is not included in the + * bitstream. + * + * Note that if desired: + * + * - The slice start code prefix may be included in a separate bitstream + * buffer array entry to the actual slice data extracted from the bitstream. + * - Multiple bitstream buffer array entries (e.g. one per slice) may point at + * the same physical data storage for the slice start code prefix. + * * \section video_mixer_usage Video Mixer Usage * * \subsection video_surface_content VdpVideoSurface Content @@ -2463,6 +2483,17 @@ typedef uint32_t VdpDecoderProfile; /** \hideinitializer */ /** \brief Support for 8 bit depth only */ #define VDP_DECODER_PROFILE_H264_HIGH_444_PREDICTIVE ((VdpDecoderProfile)26) +/** \hideinitializer */ +/** \brief MPEG-H Part 2 == H.265 == HEVC */ +#define VDP_DECODER_PROFILE_HEVC_MAIN ((VdpDecoderProfile)50) +/** \hideinitializer */ +#define VDP_DECODER_PROFILE_HEVC_MAIN_10 ((VdpDecoderProfile)51) +/** \hideinitializer */ +#define VDP_DECODER_PROFILE_HEVC_MAIN_STILL ((VdpDecoderProfile)52) +/** \hideinitializer */ +#define VDP_DECODER_PROFILE_HEVC_MAIN_12 ((VdpDecoderProfile)53) +/** \hideinitializer */ +#define VDP_DECODER_PROFILE_HEVC_MAIN_444 ((VdpDecoderProfile)54) /** \hideinitializer */ #define VDP_DECODER_LEVEL_MPEG1_NA 0 @@ -2558,6 +2589,38 @@ typedef uint32_t VdpDecoderProfile; #define VDP_DECODER_LEVEL_DIVX_NA 0 /** + * The VDPAU H.265/HEVC decoder levels correspond to the values of + * general_level_idc as described in the H.265 Specification, Annex A, + * Table A.1. The enumeration values are equal to thirty times the level + * number. + */ +#define VDP_DECODER_LEVEL_HEVC_1 30 +/** \hideinitializer */ +#define VDP_DECODER_LEVEL_HEVC_2 60 +/** \hideinitializer */ +#define VDP_DECODER_LEVEL_HEVC_2_1 63 +/** \hideinitializer */ +#define VDP_DECODER_LEVEL_HEVC_3 90 +/** \hideinitializer */ +#define VDP_DECODER_LEVEL_HEVC_3_1 93 +/** \hideinitializer */ +#define VDP_DECODER_LEVEL_HEVC_4 120 +/** \hideinitializer */ +#define VDP_DECODER_LEVEL_HEVC_4_1 123 +/** \hideinitializer */ +#define VDP_DECODER_LEVEL_HEVC_5 150 +/** \hideinitializer */ +#define VDP_DECODER_LEVEL_HEVC_5_1 153 +/** \hideinitializer */ +#define VDP_DECODER_LEVEL_HEVC_5_2 156 +/** \hideinitializer */ +#define VDP_DECODER_LEVEL_HEVC_6 180 +/** \hideinitializer */ +#define VDP_DECODER_LEVEL_HEVC_6_1 183 +/** \hideinitializer */ +#define VDP_DECODER_LEVEL_HEVC_6_2 186 + +/** * \brief Query the implementation's VdpDecoder capabilities. * \param[in] device The device to query. * \param[in] profile The decoder profile for which information is requested. @@ -3054,6 +3117,270 @@ typedef VdpPictureInfoMPEG4Part2 VdpPictureInfoDivX4; typedef VdpPictureInfoMPEG4Part2 VdpPictureInfoDivX5; /** + * \brief Picture parameter information for an H.265/HEVC picture. + * + * References to "copy of ... bitstream field" in the field descriptions + * may refer to data literally parsed from the bitstream, + * or derived from the bitstream using a mechanism described in + * Rec. ITU-T H.265 (04/2013), hereafter referred to as + * "the H.265/HEVC Specification". + * + * VDPAU H.265/HEVC implementations implement the portion of the decoding + * process described by clauses 8.4, 8.5, 8.6 and 8.7 of the the + * H.265/HEVC Specification. VdpPictureInfoHEVC provides enough data + * to complete this portion of the decoding process, plus additional + * information not defined in the H.265/HEVC Specification that may be + * useful to particular implementations. + * + * Client applications must supply every field in this struct. + */ +typedef struct { + /** Copy of the Sequence Parameter Set bitstream field. */ + uint8_t chroma_format_idc; + /** Copy of the Sequence Parameter Set bitstream field. + Only valid if chroma_format_idc == 3. Ignored otherwise.*/ + uint8_t separate_colour_plane_flag; + /** Copy of the Sequence Parameter Set bitstream field. */ + uint32_t pic_width_in_luma_samples; + /** Copy of the Sequence Parameter Set bitstream field. */ + uint32_t pic_height_in_luma_samples; + /** Copy of the Sequence Parameter Set bitstream field. */ + uint8_t bit_depth_luma_minus8; + /** Copy of the Sequence Parameter Set bitstream field. */ + uint8_t bit_depth_chroma_minus8; + /** Copy of the Sequence Parameter Set bitstream field. */ + uint8_t log2_max_pic_order_cnt_lsb_minus4; + /** Copy of the Sequence Parameter Set bitstream field. Provides + the value corresponding to the nuh_temporal_id of the frame + to be decoded. */ + uint8_t sps_max_dec_pic_buffering_minus1; + /** Copy of the Sequence Parameter Set bitstream field. */ + uint8_t log2_min_luma_coding_block_size_minus3; + /** Copy of the Sequence Parameter Set bitstream field. */ + uint8_t log2_diff_max_min_luma_coding_block_size; + /** Copy of the Sequence Parameter Set bitstream field. */ + uint8_t log2_min_transform_block_size_minus2; + /** Copy of the Sequence Parameter Set bitstream field. */ + uint8_t log2_diff_max_min_transform_block_size; + /** Copy of the Sequence Parameter Set bitstream field. */ + uint8_t max_transform_hierarchy_depth_inter; + /** Copy of the Sequence Parameter Set bitstream field. */ + uint8_t max_transform_hierarchy_depth_intra; + /** Copy of the Sequence Parameter Set bitstream field. */ + uint8_t scaling_list_enabled_flag; + /** Scaling lists, in diagonal order, to be used for this frame. */ + /** Scaling List for 4x4 quantization matrix, + indexed as ScalingList4x4[matrixId][i]. */ + uint8_t ScalingList4x4[6][16]; + /** Scaling List for 8x8 quantization matrix, + indexed as ScalingList8x8[matrixId][i]. */ + uint8_t ScalingList8x8[6][64]; + /** Scaling List for 16x16 quantization matrix, + indexed as ScalingList16x16[matrixId][i]. */ + uint8_t ScalingList16x16[6][64]; + /** Scaling List for 32x32 quantization matrix, + indexed as ScalingList32x32[matrixId][i]. */ + uint8_t ScalingList32x32[2][64]; + /** Scaling List DC Coefficients for 16x16, + indexed as ScalingListDCCoeff16x16[matrixId]. */ + uint8_t ScalingListDCCoeff16x16[6]; + /** Scaling List DC Coefficients for 32x32, + indexed as ScalingListDCCoeff32x32[matrixId]. */ + uint8_t ScalingListDCCoeff32x32[2]; + /** Copy of the Sequence Parameter Set bitstream field. */ + uint8_t amp_enabled_flag; + /** Copy of the Sequence Parameter Set bitstream field. */ + uint8_t sample_adaptive_offset_enabled_flag; + /** Copy of the Sequence Parameter Set bitstream field. */ + uint8_t pcm_enabled_flag; + /** Copy of the Sequence Parameter Set bitstream field. + Only needs to be set if pcm_enabled_flag is set. Ignored otherwise. */ + uint8_t pcm_sample_bit_depth_luma_minus1; + /** Copy of the Sequence Parameter Set bitstream field. + Only needs to be set if pcm_enabled_flag is set. Ignored otherwise. */ + uint8_t pcm_sample_bit_depth_chroma_minus1; + /** Copy of the Sequence Parameter Set bitstream field. + Only needs to be set if pcm_enabled_flag is set. Ignored otherwise. */ + uint8_t log2_min_pcm_luma_coding_block_size_minus3; + /** Copy of the Sequence Parameter Set bitstream field. + Only needs to be set if pcm_enabled_flag is set. Ignored otherwise. */ + uint8_t log2_diff_max_min_pcm_luma_coding_block_size; + /** Copy of the Sequence Parameter Set bitstream field. + Only needs to be set if pcm_enabled_flag is set. Ignored otherwise. */ + uint8_t pcm_loop_filter_disabled_flag; + /** Copy of the Sequence Parameter Set bitstream field. + Per spec, when zero, assume short_term_ref_pic_set_sps_flag + is also zero. */ + uint8_t num_short_term_ref_pic_sets; + /** Copy of the Sequence Parameter Set bitstream field. */ + uint8_t long_term_ref_pics_present_flag; + /** Copy of the Sequence Parameter Set bitstream field. + Only needed if long_term_ref_pics_present_flag is set. Ignored + otherwise. */ + uint8_t num_long_term_ref_pics_sps; + /** Copy of the Sequence Parameter Set bitstream field. */ + uint8_t sps_temporal_mvp_enabled_flag; + /** Copy of the Sequence Parameter Set bitstream field. */ + uint8_t strong_intra_smoothing_enabled_flag; + + /** Copy of the Picture Parameter Set bitstream field. */ + uint8_t dependent_slice_segments_enabled_flag; + /** Copy of the Picture Parameter Set bitstream field. */ + uint8_t output_flag_present_flag; + /** Copy of the Picture Parameter Set bitstream field. */ + uint8_t num_extra_slice_header_bits; + /** Copy of the Picture Parameter Set bitstream field. */ + uint8_t sign_data_hiding_enabled_flag; + /** Copy of the Picture Parameter Set bitstream field. */ + uint8_t cabac_init_present_flag; + /** Copy of the Picture Parameter Set bitstream field. */ + uint8_t num_ref_idx_l0_default_active_minus1; + /** Copy of the Picture Parameter Set bitstream field. */ + uint8_t num_ref_idx_l1_default_active_minus1; + /** Copy of the Picture Parameter Set bitstream field. */ + int8_t init_qp_minus26; + /** Copy of the Picture Parameter Set bitstream field. */ + uint8_t constrained_intra_pred_flag; + /** Copy of the Picture Parameter Set bitstream field. */ + uint8_t transform_skip_enabled_flag; + /** Copy of the Picture Parameter Set bitstream field. */ + uint8_t cu_qp_delta_enabled_flag; + /** Copy of the Picture Parameter Set bitstream field. + Only needed if cu_qp_delta_enabled_flag is set. Ignored otherwise. */ + uint8_t diff_cu_qp_delta_depth; + /** Copy of the Picture Parameter Set bitstream field. */ + int8_t pps_cb_qp_offset; + /** Copy of the Picture Parameter Set bitstream field. */ + int8_t pps_cr_qp_offset; + /** Copy of the Picture Parameter Set bitstream field. */ + uint8_t pps_slice_chroma_qp_offsets_present_flag; + /** Copy of the Picture Parameter Set bitstream field. */ + uint8_t weighted_pred_flag; + /** Copy of the Picture Parameter Set bitstream field. */ + uint8_t weighted_bipred_flag; + /** Copy of the Picture Parameter Set bitstream field. */ + uint8_t transquant_bypass_enabled_flag; + /** Copy of the Picture Parameter Set bitstream field. */ + uint8_t tiles_enabled_flag; + /** Copy of the Picture Parameter Set bitstream field. */ + uint8_t entropy_coding_sync_enabled_flag; + /** Copy of the Picture Parameter Set bitstream field. + Only valid if tiles_enabled_flag is set. Ignored otherwise. */ + uint8_t num_tile_columns_minus1; + /** Copy of the Picture Parameter Set bitstream field. + Only valid if tiles_enabled_flag is set. Ignored otherwise. */ + uint8_t num_tile_rows_minus1; + /** Copy of the Picture Parameter Set bitstream field. + Only valid if tiles_enabled_flag is set. Ignored otherwise. */ + uint8_t uniform_spacing_flag; + /** Copy of the Picture Parameter Set bitstream field. + Only need to set 0..num_tile_columns_minus1. The struct + definition reserves up to the maximum of 22. Invalid values are + ignored. */ + uint16_t column_width_minus1[22]; + /** Copy of the Picture Parameter Set bitstream field. + Only need to set 0..num_tile_rows_minus1. The struct + definition reserves up to the maximum of 20. Invalid values are + ignored.*/ + uint16_t row_height_minus1[20]; + /** Copy of the Picture Parameter Set bitstream field. + Only needed if tiles_enabled_flag is set. Invalid values are + ignored. */ + uint8_t loop_filter_across_tiles_enabled_flag; + /** Copy of the Picture Parameter Set bitstream field. */ + uint8_t pps_loop_filter_across_slices_enabled_flag; + /** Copy of the Picture Parameter Set bitstream field. */ + uint8_t deblocking_filter_control_present_flag; + /** Copy of the Picture Parameter Set bitstream field. + Only valid if deblocking_filter_control_present_flag is set. Ignored + otherwise. */ + uint8_t deblocking_filter_override_enabled_flag; + /** Copy of the Picture Parameter Set bitstream field. + Only valid if deblocking_filter_control_present_flag is set. Ignored + otherwise. */ + uint8_t pps_deblocking_filter_disabled_flag; + /** Copy of the Picture Parameter Set bitstream field. + Only valid if deblocking_filter_control_present_flag is set and + pps_deblocking_filter_disabled_flag is not set. Ignored otherwise.*/ + int8_t pps_beta_offset_div2; + /** Copy of the Picture Parameter Set bitstream field. + Only valid if deblocking_filter_control_present_flag is set and + pps_deblocking_filter_disabled_flag is not set. Ignored otherwise. */ + int8_t pps_tc_offset_div2; + /** Copy of the Picture Parameter Set bitstream field. */ + uint8_t lists_modification_present_flag; + /** Copy of the Picture Parameter Set bitstream field. */ + uint8_t log2_parallel_merge_level_minus2; + /** Copy of the Picture Parameter Set bitstream field. */ + uint8_t slice_segment_header_extension_present_flag; + + /** Slice Segment Header bitstream fields and calculated values. */ + /** Set to 1 if nal_unit_type is equal to IDR_W_RADL or IDR_N_LP. + Set to zero otherwise. */ + uint8_t IDRPicFlag; + /** Set to 1 if nal_unit_type in the range of BLA_W_LP to + RSV_IRAP_VCL23, inclusive. Set to zero otherwise.*/ + uint8_t RAPPicFlag; + /** Copy of specification field, CurrRpsIdx, see 7.4.7.1. */ + uint8_t CurrRpsIdx; + /** Copy of specification field, see Section 7.4.7.2 of the + H.265/HEVC Specification. */ + uint32_t NumPocTotalCurr; + /** Corresponds to specification field, NumDeltaPocs[RefRpsIdx]. + Only applicable when short_term_ref_pic_set_sps_flag == 0. + Implementations will ignore this value in other cases. See 7.4.8. */ + uint32_t NumDeltaPocsOfRefRpsIdx; + /** Section 7.6.3.1 of the H.265/HEVC Specification defines the syntax of + the slice_segment_header. This header contains information that + some VDPAU implementations may choose to skip. The VDPAU API + requires client applications to track the number of bits used in the + slice header for structures associated with short term and long term + reference pictures. First, VDPAU requires the number of bits used by + the short_term_ref_pic_set array in the slice_segment_header. */ + uint32_t NumShortTermPictureSliceHeaderBits; + /** Second, VDPAU requires the number of bits used for long term reference + pictures in the slice_segment_header. This is equal to the number + of bits used for the contents of the block beginning with + "if(long_term_ref_pics_present_flag)". */ + uint32_t NumLongTermPictureSliceHeaderBits; + + /** Slice Decoding Process - Picture Order Count */ + /** The value of PicOrderCntVal of the picture in the access unit + containing the SEI message. The picture being decoded. */ + int32_t CurrPicOrderCntVal; + + /** Slice Decoding Process - Reference Picture Sets */ + /** Array of video reference surfaces. + Set any unused positions to VDP_INVALID_HANDLE. */ + VdpVideoSurface RefPics[16]; + /** Array of picture order counts. These correspond to positions + in the RefPics array. */ + int32_t PicOrderCntVal[16]; + /** Array used to specify whether a particular RefPic is + a long term reference. A value of "1" indicates a long-term + reference. */ + uint8_t IsLongTerm[16]; + /** Copy of specification field, see Section 8.3.2 of the + H.265/HEVC Specification. */ + uint8_t NumPocStCurrBefore; + /** Copy of specification field, see Section 8.3.2 of the + H.265/HEVC Specification. */ + uint8_t NumPocStCurrAfter; + /** Copy of specification field, see Section 8.3.2 of the + H.265/HEVC Specification. */ + uint8_t NumPocLtCurr; + /** Reference Picture Set list, one of the short-term RPS. These + correspond to positions in the RefPics array. */ + uint8_t RefPicSetStCurrBefore[8]; + /** Reference Picture Set list, one of the short-term RPS. These + correspond to positions in the RefPics array. */ + uint8_t RefPicSetStCurrAfter[8]; + /** Reference Picture Set list, one of the long-term RPS. These + correspond to positions in the RefPics array. */ + uint8_t RefPicSetLtCurr[8]; +} VdpPictureInfoHEVC; + +/** * \brief Decode a compressed field/frame and render the result * into a \ref VdpVideoSurface "VdpVideoSurface". * \param[in] decoder The decoder object that will perform the |