Several driver modules do not have a ChangeLog target in Makefile.am #23814

The git generated ChangeLog replaces the hand written one.
Update configure.ac to xorg-macros level 1.3.
Use XORG_DEFAULT_OPTIONS which replaces four XORG_* macros
Update Makefile.am to add ChangeLog target if missing
Remove ChangeLog from EXTRA_DIST or *CLEAN variables
This is a pre-req for the INSTALL_CMD

3 files changed, 13 insertions, 262 deletions

diff --git a/ChangeLog b/ChangeLog
deleted file mode 100644
index e402090..0000000
--- a/ChangeLog
+++ /dev/null
@@ -1,259 +0,0 @@
-2006-04-11  Luc Verhaegen  <libv@skynet.be>
-
-	* src/tseng_mode.c: (TsengSave), (TsengRestore):
-
-	Fix dotclock breakage on ET6000.
-	The fish crawled out of the swamp, but still had gills and fins.
-	The internal ramdac still has multiple dotclock registers, and the
-	previous change only fixed up the external ramdacs of ET4000W32ps.
-	(Reported by the other tseng owner: Adam Jackson)
-
-2006-03-08  Luc Verhaegen  <libv@skynet.be>
-
-	* src/tseng_mode.c: (STG1703Restore), (CH8398Store),
-	(TsengModeInit):
-
-	Remove daft dependance on mode->ClockIndex. We used it to tell
-	vgaHWInit to use clock 2, while ClockIndex = -1 is clock 3. So
-	just use clock 3 for the ramdacs and be done with.
-
-2006-01-31  Luc Verhaegen  <libv@skynet.be>
-
-	* src/tseng.h:
-	* src/tseng_driver.c: (TsengPreInit):
-	* src/tseng_mode.c: (STG1703Mode), (CH8398Mode),
-	(TsengSetupClockRange), (TsengSave), (TsengRestore),
-	(TsengModeInit):
-
-	Remove dual clockranges. ET4000W32p now always uses the dac bus
-	as 16bits wide.
-
-2006-01-29  Luc Verhaegen  <libv@skynet.be>
-
-	* src/tseng_driver.c: (TsengPreInit):
-	* src/tseng_mode.c: (STG1703Detect), (STG1703Restore),
-	(STG1703Clock), (STG1703Mode), (CH8398Detect), (CH8398PrintRegs),
-	(CH8398Store), (CH8398Restore), (CH8398Clock), (CH8398Mode),
-	(TsengRAMDACProbe), (TsengSave), (TsengRestore), (TsengModeInit):
-
-	Fully implement the Chrontel CH8398. This has the exact same
-        24bpp weirdness, so i guess this is an fb issue.
-
-2006-01-28  Luc Verhaegen  <libv@skynet.be>
-
-	* src/tseng.h:
-	* src/tseng_driver.c: (TsengGetRec), (TsengFreeRec),
-	(TsengPreInit):
-	* src/tseng_mode.c: (STG1703Detect), (STG1703PrintRegs),
-	(STG1703Store), (STG1703Restore), (STG1703Clock), (STG1703Mode),
-	(TsengRAMDACProbe), (tseng_set_ramdac_bpp), (TsengSave),
-	(TsengRestore), (TsengModeInit):
-
-	Fully implement the SGS-Thomson STG-1703. This is working great
-	except for 24bpp, where there seems to be an offset issue. Red is
-	blue, green is red, blue is green. Will dig that one out later on.
-	8bpp and 16bpp (both with 8 and 16bit dac bus) and 32bpp are great.
-
-2006-01-28  Luc Verhaegen  <libv@skynet.be>
-
-	* src/tseng.h:
-	* src/tseng_mode.c: (tseng_set_ramdac_bpp), (ET6000CalcClock),
-	(TsengSave), (TsengRestore), (TsengModeInit):
-	
-	- Remove pTseng->ModeReg
-	- Split ET6000 bpp, dotclock and ram clock handling from the 
-	  ET4000s ramdac code.
-
-2006-01-27  Luc Verhaegen  <libv@skynet.be>
-
-	* src/tseng.h:
-	* src/tseng_mode.c: (tseng_set_ramdac_bpp), (tseng_clock_setup),
-	(TsengModeInit):
-
-	Clear duplicate PrivFlag.
-
-2006-01-26  Luc Verhaegen  <libv@skynet.be>
-
-	* src/tseng.h:
-	* src/tseng_cursor.c: (ET4000CursorRead), (ET4000CursorWrite),
-	(TsengShowCursor), (TsengHideCursor), (TsengSetCursorPosition),
-	(TsengSetCursorColors), (TsengLoadCursorImage),
-	(TsengHWCursorInit), (TsengCursorStore), (TsengCursorRestore):
-	* src/tseng_driver.c: (TsengUnlock), (TsengLock),
-	(TsengPreInitPCI), (et6000_check_videoram), (TsengDetectMem),
-	(TsengProcessHibit), (TsengPreInit), (TsengEnterVT),
-	(TsengLeaveVT), (TsengSaveScreen):
-	* src/tseng_mode.c: (vgaHWReadDacReadAddr), (vgaHWWriteBank),
-	(vgaHWReadBank), (vgaHWWriteSegment), (vgaHWReadSegment),
-	(vgaHWWriteModeControl), (vgaHWHerculesSecondPage), (ET6000IORead),
-	(ET6000IOWrite), (TsengRAMDACProbe), (tseng_set_ramdac_bpp),
-	(TsengAdjustFrame), (TsengSave), (TsengRestore), (TsengModeInit),
-	(TsengCrtcDPMSSet), (TsengHVSyncDPMSSet):
-
-	Improve tseng driver transparency.
-	- move all VGA inbs/outbs to vgahw calls, provide our own when 
-	  relevant callbacks are missing.
-	- move ET4000 sprite accesses to ET4000CursorRead/Write.
-	- move ET6000 IO accesses to ET6000IORead/Write.
-	- fix regression with CH8398, introduced with the ramdac cleanup.
-
-2006-01-23  Luc Verhaegen  <libv@skynet.be>
-
-	* src/Makefile.am:
-	* src/tseng.h:
-	* src/tseng_accel.c: (tseng_terminate_acl),
-	(tseng_recover_timeout), (tseng_init_acl),
-	(TsengSubsequentScanlineCPUToScreenColorExpandFill),
-	(TsengSubsequentColorExpandScanline),
-	(TsengSubsequentColorExpandScanline_8bpp),
-	(TsengSubsequentColorExpandScanline_16bpp),
-	(TsengSubsequentColorExpandScanline_24bpp),
-	(TsengSubsequentColorExpandScanline_32bpp),
-	(TsengSetupForCPUToScreenColorExpandFill),
-	(TsengSubsequentCPUToScreenColorExpandFill),
-	(TsengSetupForScreenToScreenColorExpandFill),
-	(TsengSubsequentScreenToScreenColorExpandFill),
-	(TsengXAAInit_Colexp), (TsengXAAInit):
-	* src/tseng_accel.h:
-	* src/tseng_acl.c:
-	* src/tseng_acl.h:
-	* src/tseng_clock.c:
-	* src/tseng_colexp.c:
-	* src/tseng_dpms.c:
-	* src/tseng_driver.c: (TsengSaveScreen), (TsengSwitchMode):
-	* src/tseng_inline.h:
-	* src/tseng_mode.c: (vgaHWReadDacWriteAddr), (tsengSTG170xDetect),
-	(tsengCH8398Detect), (TsengRAMDACProbe), (tseng_set_ramdac_bpp),
-	(tseng_clock_setup), (TsengcommonCalcClock), (TsengAdjustFrame),
-	(TsengValidMode), (TsengSave), (TsengRestore), (TsengModeInit),
-	(TsengCrtcDPMSSet), (TsengHVSyncDPMSSet):
-	* src/tseng_ramdac.c:
-	
-	Reorganise code:
-	- move tseng_ramdac.c, tseng_clock.c, tseng_dpms.c, and
-	  TsengAdjustFrame, TsengValidMode, TsengSave, TsengRestore,
-	  TsengModeInit from tseng_driver.c into tseng_mode.c.
-	- move tseng_acl.c and tseng_colexp.c into tseng_accel.c
-	- move tseng_acl.h and tseng_inline.g into tseng_accel.h
-	- move all accel functions except for 2 to static, ifdef
-	  out unused ones.
-
-2006-01-22  Luc Verhaegen  <libv@skynet.be>
-
-	* .cvsignore:
-	* man/.cvsignore:
-	* src/tseng.h:
-	* src/tseng_clock.c: (tseng_clock_setup):
-	* src/tseng_driver.c: (TsengProcessOptions), (TsengPreInit),
-	(TsengModeInit), (TsengSave), (TsengRestore), (ET4000Probe), (if):
-	* src/tseng_ramdac.c: (vgaHWReadDacWriteAddr),
-	(tsengSTG170xDetect), (tsengCH8398Detect), (TsengRAMDACProbe),
-	(tseng_set_ramdac_bpp):
-
-	Clean up ramdac handling.
-	- Remove all ramdacs except STG1703 and CH8398. Both are in my
-	  possession, both are currently broken and have been for ages,
-	  but both will be fixed. ICS5341 is out there somewhere too,
-	  will be added when i get my hands on it.
-	- Cleanly split up ET4000 handling and ET6000 code, both for
-	  dotclock, memory clocking and ramdac.
-	- Limit driver to either 8, 16, 24 or 32bits.
-
-2006-01-22  Luc Verhaegen  <libv@skynet.be>
-
-	* src/Makefile.am:
-	* src/tseng.h:
-	* src/tseng_accel.c: (TsengXAAInit):
-	* src/tseng_acl.c: (tseng_init_acl):
-	* src/tseng_bank.c:
-	* src/tseng_colexp.c: (TsengXAAInit_Colexp):
-	* src/tseng_cursor.c: (TsengHWCursorInit):
-	* src/tseng_dga.c: (TsengDGAInit), (Tseng_OpenFramebuffer):
-	* src/tseng_driver.c: (TsengPreInitPCI), (TsengLimitMem),
-	(TsengProcessOptions), (TsengGetFbAddress), (TsengPreInit),
-	(TsengSetupAccelMemory), (TsengScreenInit), (TsengMapMem),
-	(TsengUnmapMem), (TsengModeInit):
-
-	Tseng in the PCI era: Remove banked memory.
-
-2006-01-22  Luc Verhaegen  <libv@skynet.be>
-
-	* configure.ac:
-	* src/tseng.h:
-	* src/tseng_accel.c: (TsengXAAInit), (Tseng_setup_screencopy):
-	* src/tseng_acl.c: (tseng_recover_timeout), (tseng_init_acl):
-	* src/tseng_acl.h:
-	* src/tseng_clock.c: (tseng_clock_setup),
-	(Tseng_ET4000ClockSelect):
-	* src/tseng_colexp.c: (TsengXAAInit_Colexp),
-	(TsengSubsequentScanlineCPUToScreenColorExpandFill):
-	* src/tseng_cursor.c: (TsengShowCursor), (TsengHideCursor),
-	(TsengSetCursorPosition), (TsengSetCursorColors),
-	(TsengLoadCursorImage):
-	* src/tseng_driver.c: (TsengIdentify), (TsengProbe),
-	(TsengPreInitPCI), (TsengLimitMem), (TsengDetectMem),
-	(TsengProcessOptions), (TsengGetLinFbAddress), (TsengPreInit),
-	(TsengScreenInit), (TsengSaveScreen), (TsengModeInit), (TsengSave):
-	* src/tseng_inline.h:
-	* src/tseng_ramdac.c: (Check_Tseng_Ramdac), (tseng_set_ramdac_bpp):
-
-	- -Wall and -pedantic are gccisms (Alan Coopersmith).
-	- Remove ET4000, ET4000W32 and ET4000W32I devices.
-	- Rework handling of remaining devices.
-	- Clean up Probe and PreInit to only handle pci devices.
-
-2006-01-21  Luc Verhaegen  <libv@skynet.be>
-
-	* configure.ac:
-	* src/tseng.h:
-	* src/tseng_driver.c: (TsengAssignFPtr), (TsengModeInit),
-	(TsengSave):
-	* src/tseng_ramdac.c: (tseng_set_ramdac_bpp):
-	It's 2006, maybe it's time to inform the tseng driver that humankind
-	survived the millenium bug.
-
-	First phase of changes:
-	- Fix a glaring problem that's been there since 1998: RegRec arrays
-	  used beyond their boundaries.
-	- Add -Wall and -pedantic to CFLAGS.
-	- Fix VERSION redefinition.
-	
-2005-12-20  Kevin E. Martin  <kem-at-freedesktop-dot-org>
-
-	* configure.ac:
-	Update package version for X11R7 release.
-
-2005-12-14  Kevin E. Martin  <kem-at-freedesktop-dot-org>
-
-	* configure.ac:
-	Update package version number for final X11R7 release candidate.
-
-2005-12-06  Kevin E. Martin  <kem-at-freedesktop-dot-org>
-
-	* man/Makefile.am:
-	Change *man_SOURCES ==> *man_PRE to fix autotools warnings.
-
-2005-12-03  Kevin E. Martin  <kem-at-freedesktop-dot-org>
-
-	* configure.ac:
-	Update package version number for X11R7 RC3 release.
-
-2005-12-01  Kevin E. Martin  <kem-at-freedesktop-dot-org>
-
-	* configure.ac:
-	Remove extraneous AC_MSG_RESULT.
-
-2005-11-29  Adam Jackson  <ajax@freedesktop.org>
-
-	* configure.ac:
-	Only build dlloader modules by default.
-
-2005-11-09  Kevin E. Martin  <kem-at-freedesktop-dot-org>
-
-	* configure.ac:
-	Update package version number for X11R7 RC2 release.
-
-2005-11-01  Kevin E. Martin  <kem-at-freedesktop-dot-org>
-
-	* configure.ac:
-	Update pkgcheck dependencies to work with separate build roots.
diff --git a/Makefile.am b/Makefile.am
index 7052905..8b7c3c7 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -20,3 +20,10 @@
 
 AUTOMAKE_OPTIONS = foreign
 SUBDIRS = src man
+
+.PHONY: ChangeLog
+
+ChangeLog:
+	$(CHANGELOG_CMD)
+
+dist-hook: ChangeLog
diff --git a/configure.ac b/configure.ac
index 7a0da70..fd820d9 100644
--- a/configure.ac
+++ b/configure.ac
@@ -34,6 +34,12 @@ AM_INIT_AUTOMAKE([dist-bzip2])
 
 AM_MAINTAINER_MODE
 
+# Require xorg-macros: XORG_DEFAULT_OPTIONS
+m4_ifndef([XORG_MACROS_VERSION],
+          [m4_fatal([must install xorg-macros 1.3 or later before running autoconf/autogen])])
+XORG_MACROS_VERSION(1.3)
+XORG_DEFAULT_OPTIONS
+
 # Checks for programs.
 AC_DISABLE_STATIC
 AC_PROG_LIBTOOL
@@ -86,9 +92,6 @@ AC_SUBST([moduledir])
 DRIVER_NAME=tseng
 AC_SUBST([DRIVER_NAME])
 
-XORG_MANPAGE_SECTIONS
-XORG_RELEASE_VERSION
-
 AC_OUTPUT([
 	Makefile
 	src/Makefile