README: fix linuxdoc content

defs.ent are located under X11 directory
ident tag is not a Linuxdoc tag
replace docbook email tag with linuxdoc email tag

Signed-off-by: Gaetan Nadon <memsize@videotron.ca>

2 files changed, 79 insertions, 80 deletions

diff --git a/README b/README
index ceffb0b..1d1dd9d 100644
--- a/README
+++ b/README
@@ -18,130 +18,130 @@
 
   ______________________________________________________________________
 
-  1.  Supported Hardware
+  1.  Supported Hardware
 
 
-  +o  Intel 740 based cards.
+  o  Intel 740 based cards.
 
 
 
-  2.  Features
+  2.  Features
 
 
-  +o  Full support for 8, 15, 16, and 24 bit pixel depths.
+  o  Full support for 8, 15, 16, and 24 bit pixel depths.
 
-  +o  Hardware cursor support to reduce sprite flicker.
+  o  Hardware cursor support to reduce sprite flicker.
 
-  +o  Hardware accelerated 2D drawing engine support for 8, 15, 16 and 24
+  o  Hardware accelerated 2D drawing engine support for 8, 15, 16 and 24
      bit pixel depths.
 
-  +o  Support for high resolution video modes up to 1600x1200.
+  o  Support for high resolution video modes up to 1600x1200.
 
-  +o  Support for doublescan video modes (e.g., 320x200 and 320x240).
+  o  Support for doublescan video modes (e.g., 320x200 and 320x240).
 
-  +o  Support for gamma correction at all pixel depths.
+  o  Support for gamma correction at all pixel depths.
 
-  +o  Fully programmable clock supported.
+  o  Fully programmable clock supported.
 
-  +o  Robust text mode restore for VT switching.
+  o  Robust text mode restore for VT switching.
 
 
 
-  3.  Technical Notes
+  3.  Technical Notes
 
 
-  +o  Hardware acceleration is not possible when using the framebuffer in
+  o  Hardware acceleration is not possible when using the framebuffer in
      32 bit per pixel format.
 
-  +o  Interlace modes cannot be supported.
+  o  Interlace modes cannot be supported.
 
 
 
-  4.  Reported Working Video Cards
+  4.  Reported Working Video Cards
 
 
-  +o  Real3D Starfighter AGP
+  o  Real3D Starfighter AGP
 
-  +o  Real3D Starfighter PCI
+  o  Real3D Starfighter PCI
 
-  +o  Diamond Stealth II/G460 AGP
+  o  Diamond Stealth II/G460 AGP
 
-  +o  3DVision-i740 AGP
+  o  3DVision-i740 AGP
 
-  +o  ABIT G740 8MB SDRAM
+  o  ABIT G740 8MB SDRAM
 
-  +o  Acorp AGP i740
+  o  Acorp AGP i740
 
-  +o  AGP 2D/3D V. 1N, AGP-740D
+  o  AGP 2D/3D V. 1N, AGP-740D
 
-  +o  AOpen AGP 2X 3D Navigator PA740
+  o  AOpen AGP 2X 3D Navigator PA740
 
-  +o  ARISTO i740 AGP (ART-i740-G)
+  o  ARISTO i740 AGP (ART-i740-G)
 
-  +o  ASUS AGP-V2740
+  o  ASUS AGP-V2740
 
-  +o  Atrend (Speedy) 3DIO740 AGP (ATC-2740)
+  o  Atrend (Speedy) 3DIO740 AGP (ATC-2740)
 
-  +o  Chaintech AGP-740D
+  o  Chaintech AGP-740D
 
-  +o  EliteGroup(ECS) 3DVision-i740 AGP
+  o  EliteGroup(ECS) 3DVision-i740 AGP
 
-  +o  EONtronics Picasso 740
+  o  EONtronics Picasso 740
 
-  +o  EONtronics Van Gogh
+  o  EONtronics Van Gogh
 
-  +o  Everex MVGA i740/AG
+  o  Everex MVGA i740/AG
 
-  +o  Flagpoint Shocker i740 8MB
+  o  Flagpoint Shocker i740 8MB
 
-  +o  Gainward CardExpert 740 8MB
+  o  Gainward CardExpert 740 8MB
 
-  +o  Genoa Systems Phantom 740
+  o  Genoa Systems Phantom 740
 
-  +o  Gigabyte Predator i740 8MB AGP
+  o  Gigabyte Predator i740 8MB AGP
 
-  +o  Hercules Terminator 128 2X/i AGP
+  o  Hercules Terminator 128 2X/i AGP
 
-  +o  HOT-158 (Shuttle)
+  o  HOT-158 (Shuttle)
 
-  +o  Intel Express 3D AGP
+  o  Intel Express 3D AGP
 
-  +o  Jaton Video-740 AGP 3D
+  o  Jaton Video-740 AGP 3D
 
-  +o  Jetway J-740-3D 8MB AGP, i740 AGP 3D
+  o  Jetway J-740-3D 8MB AGP, i740 AGP 3D
 
-  +o  Joymedia Apollo 7400
+  o  Joymedia Apollo 7400
 
-  +o  Leadtek Winfast S900
+  o  Leadtek Winfast S900
 
-  +o  Machspeed Raptor i740 AGP 4600
+  o  Machspeed Raptor i740 AGP 4600
 
-  +o  Magic-Pro MP-740DVD
+  o  Magic-Pro MP-740DVD
 
-  +o  MAXI Gamer AGP 8 MB
+  o  MAXI Gamer AGP 8 MB
 
-  +o  Palit Daytona AGP740
+  o  Palit Daytona AGP740
 
-  +o  PowerColor C740 (SG/SD) AGP
+  o  PowerColor C740 (SG/SD) AGP
 
-  +o  QDI Amazing I
+  o  QDI Amazing I
 
-  +o  Soyo AGP (SY-740 AGP)
+  o  Soyo AGP (SY-740 AGP)
 
-  +o  Spacewalker Hot-158
+  o  Spacewalker Hot-158
 
-  +o  VideoExcel AGP 740
+  o  VideoExcel AGP 740
 
-  +o  ViewTop ZeusL 8MB
+  o  ViewTop ZeusL 8MB
 
-  +o  Winfast S900 i740 AGP 8MB
+  o  Winfast S900 i740 AGP 8MB
 
 
 
-  5.  Configuration
+  5.  Configuration
 
   The driver auto-detects all device information necessary to initialize
-  the card.  The only lines you need in the "Device" section of your
+  the card. The only lines you need in the "Device" section of your
   xorg.conf file are:
 
          Section "Device"
@@ -150,59 +150,60 @@
          EndSection
 
 
+
   However, if you have problems with auto-detection, you can specify:
 
-  +o  VideoRam - in kilobytes
+  o  VideoRam - in kilobytes
 
-  +o  DacSpeed - in MHz
+  o  DacSpeed - in MHz
 
-  +o  MemBase  - physical address of the linear framebuffer
+  o  MemBase - physical address of the linear framebuffer
 
-  +o  IOBase   - physical address of the memory mapped IO registers
+  o  IOBase - physical address of the memory mapped IO registers
 
 
 
-  6.  Driver Options
+  6.  Driver Options
 
 
-  +o  "NoAccel"  - Turn off hardware acceleration
+  o  "NoAccel" - Turn off hardware acceleration
 
-  +o  "SWCursor" - Request a software cursor (hardware is default)
+  o  "SWCursor" - Request a software cursor (hardware is default)
 
-  +o  "SDRAM"    - Force the use of SDRAM timings
+  o  "SDRAM" - Force the use of SDRAM timings
 
-  +o  "SGRAM"    - Force the use of SGRAM timings
+  o  "SGRAM" - Force the use of SGRAM timings
 
-  +o  "SlowRam"  - Force the use of slower ram timings
+  o  "SlowRam" - Force the use of slower ram timings
 
-  +o  "Dac6Bit"  - Force the use of a 6 Bit Dac (8 Bit is the default)
+  o  "Dac6Bit" - Force the use of a 6 Bit Dac (8 Bit is the default)
 
-  +o  "UsePIO    - Force the use of programmed IO (Memory mapped is the
+  o  "UsePIO - Force the use of programmed IO (Memory mapped is the
      default)
 
   Note: the i740 X server should automatically detect whether your card
-  has SGRAM or SDRAM.  Use the "sgram" and "sdram" options if it is
+  has SGRAM or SDRAM. Use the "sgram" and "sdram" options if it is
   incorrectly detected.
 
 
 
-  7.  Known Limitations
+  7.  Known Limitations
 
 
-  +o  Certain drawing operations are very slow when using 24 bit pixel
+  o  Certain drawing operations are very slow when using 24 bit pixel
      depth mode.
 
 
 
-  8.  Author
+  8.  Author
 
 
-  +o  Original version by Kevin E Martin <kevin@precisioninsight.com>
+  o  Original version by Kevin E Martin
+     <mailto:kevin@precisioninsight.com>
 
-  +o  Daryll Strauss  <daryll@precisioninsight.com>
+  o  Daryll Strauss  <mailto:daryll@precisioninsight.com>
 
-  The Xorg version of this driver originally came from XFree86 4.4
-  rc2.
+  The Xorg version of this driver originally came from XFree86 4.4 rc2.
 
   The XFree86 version of this driver was donated to The XFree86 Project
   by:
diff --git a/README.sgml b/README.sgml
index eb20607..6302e2b 100644
--- a/README.sgml
+++ b/README.sgml
@@ -1,13 +1,11 @@
 <!DOCTYPE linuxdoc PUBLIC "-//Xorg//DTD linuxdoc//EN" [
-<!ENTITY % defs SYSTEM "defs.ent"> %defs;
+<!ENTITY % defs SYSTEM "X11/defs.ent"> %defs;
 ]>
 
 <article>
 <title>Information for i740 Users
 <author>Precision Insight, Inc.
 <date>18 February 1999
-<ident>
-</ident>
 <toc>
 
 <sect>Supported Hardware
@@ -135,8 +133,8 @@ if it is incorrectly detected.
 <p>
 <itemize>
    <item>Original version by Kevin E Martin
-	<email>kevin@precisioninsight.com</email>
-   <item>Daryll Strauss <email>daryll@precisioninsight.com</email>
+	<url url="mailto:kevin@precisioninsight.com">
+   <item>Daryll Strauss <url url="mailto:daryll@precisioninsight.com">
 </itemize>
 
 The Xorg version of this driver originally came from XFree86 4.4 rc2.