modularizeapp.sh: initialize LAST to "" symlink.sh: Add bitmaps for oclock,

    and an extra textfile for pclcomp

9 files changed, 122 insertions, 0 deletions

diff --git a/AUTHORS b/AUTHORS
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/AUTHORS
diff --git a/COPYING b/COPYING
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/COPYING
diff --git a/ChangeLog b/ChangeLog
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/ChangeLog
diff --git a/INSTALL b/INSTALL
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/INSTALL
diff --git a/Makefile.am b/Makefile.am
new file mode 100644
index 0000000..3645d7b
--- /dev/null
+++ b/Makefile.am
@@ -0,0 +1,33 @@
+# 
+#  Copyright 2005  Red Hat, Inc.
+# 
+#  Permission to use, copy, modify, distribute, and sell this software and its
+#  documentation for any purpose is hereby granted without fee, provided that
+#  the above copyright notice appear in all copies and that both that
+#  copyright notice and this permission notice appear in supporting
+#  documentation, and that the name of Red Hat not be used in
+#  advertising or publicity pertaining to distribution of the software without
+#  specific, written prior permission.  Red Hat makes no
+#  representations about the suitability of this software for any purpose.  It
+#  is provided "as is" without express or implied warranty.
+# 
+#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+#  PERFORMANCE OF THIS SOFTWARE.
+
+bin_PROGRAMS = pclcomp
+
+pclcomp_CFLAGS = $(DEP_CFLAGS)
+pclcomp_LDADD = $(DEP_LIBS)
+
+pclcomp_SOURCES =	\
+        pclcomp.c
+
+dist_man_MANS = \
+        pclcomp.man
+
+EXTRA_DIST = printer.note
diff --git a/NEWS b/NEWS
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/NEWS
diff --git a/README b/README
new file mode 100644
index 0000000..d78246a
--- /dev/null
+++ b/README
@@ -0,0 +1,42 @@
+
+
+     This is pclcomp -- An HP-PCL compression filter.  It reads in
+PCL graphics files, and outputs compressed PCL files which may be sent
+directly to printers that support the compressions.  A partial list of
+printer support is included.
+
+     Why use pclcomp?
+
+	1)  PCL files are much smaller ( up to 90% ).
+
+	2)  Graphics printing on a LaserJet (IIP or III) is faster.
+
+
+     If you have a LaserJet II that does not support compression, you can
+still compress the files for storage, and decompress them while printing.
+
+     I wrote this program for testing.  This is NOT an HP product.  It will
+NOT be supported by HP, but rather myself, in my spare time, if need be.
+
+     If you need real support for driver development, then call Hewlett-
+Packard directly, preferably the ISV support group at the Boise Division.
+
+     You may use parts of this code within your drivers to support compression
+if you wish.
+
+     I did what I think is a reasonable job to make the program work for
+most possible PCL files.  Please feel free to send comments, complaints 
+or suggestions to me at tony@sdd.hp.com.  If you have a file that does
+not survive the filter intact, please e-mail me the file and describe the
+problem.
+
+     This filter runs under UNIX and MS-DOS and hopefully anything else that
+supports ANSI-C.  To compile under HP-UX:
+
+cc -Aa -O pclcomp.c -o pclcomp
+
+
+     Please direct all compliments and praise to:  tony@sdd.hp.com
+
+
+     -- Tony Parkhurst
diff --git a/autogen.sh b/autogen.sh
new file mode 100755
index 0000000..e81f989
--- /dev/null
+++ b/autogen.sh
@@ -0,0 +1,13 @@
+#! /bin/sh
+
+srcdir=`dirname $0`
+test -z "$srcdir" && srcdir=.
+
+ORIGDIR=`pwd`
+cd $srcdir
+
+autoreconf -v --install || exit 1
+cd $ORIGDIR || exit $?
+
+$srcdir/configure --enable-maintainer-mode "$@"
+
diff --git a/configure.ac b/configure.ac
new file mode 100644
index 0000000..7349537
--- /dev/null
+++ b/configure.ac
@@ -0,0 +1,34 @@
+
+dnl  Copyright 2005 Red Hat, Inc.
+dnl 
+dnl  Permission to use, copy, modify, distribute, and sell this software and its
+dnl  documentation for any purpose is hereby granted without fee, provided that
+dnl  the above copyright notice appear in all copies and that both that
+dnl  copyright notice and this permission notice appear in supporting
+dnl  documentation, and that the name of Red Hat not be used in
+dnl  advertising or publicity pertaining to distribution of the software without
+dnl  specific, written prior permission.  Red Hat makes no
+dnl  representations about the suitability of this software for any purpose.  It
+dnl  is provided "as is" without express or implied warranty.
+dnl 
+dnl  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+dnl  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+dnl  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+dnl  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+dnl  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+dnl  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+dnl  PERFORMANCE OF THIS SOFTWARE.
+dnl
+dnl Process this file with autoconf to create configure.
+
+AC_PREREQ([2.57])
+AC_INIT(pclcomp,[7.0], [xorg@freedestkop.org],pclcomp)
+AM_INIT_AUTOMAKE([dist-bzip2])
+AM_MAINTAINER_MODE
+
+AM_CONFIG_HEADER(config.h)
+
+AC_PROG_CC
+AC_PROG_INSTALL
+
+AC_OUTPUT([Makefile])