summaryrefslogtreecommitdiff
path: root/src/shaders/h264/mc/header.inc
diff options
context:
space:
mode:
Diffstat (limited to 'src/shaders/h264/mc/header.inc')
-rw-r--r--src/shaders/h264/mc/header.inc333
1 files changed, 0 insertions, 333 deletions
diff --git a/src/shaders/h264/mc/header.inc b/src/shaders/h264/mc/header.inc
deleted file mode 100644
index 1291feb..0000000
--- a/src/shaders/h264/mc/header.inc
+++ /dev/null
@@ -1,333 +0,0 @@
-/*
- * Common header file for all AVC MC kernels
- * Copyright © <2010>, Intel Corporation.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the
- * "Software"), to deal in the Software without restriction, including
- * without limitation the rights to use, copy, modify, merge, publish,
- * distribute, sub license, and/or sell copies of the Software, and to
- * permit persons to whom the Software is furnished to do so, subject to
- * the following conditions:
- *
- * The above copyright notice and this permission notice (including the
- * next paragraph) shall be included in all copies or substantial portions
- * of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
- * IN NO EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR
- * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
- * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
- * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- * This file was originally licensed under the following license
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- */
-#if !defined(__HEADER__) // Make sure this file is only included once
-#define __HEADER__
-
-// Module name: header.inc
-//
-// Common header file for all AVC MC kernels
-//
-
-#ifndef COMBINED_KERNEL
-#ifdef DEV_CTG
- #define SW_SCOREBOARD // SW Scoreboard should be enabled for CTG and earlier
- #undef HW_SCOREBOARD // HW Scoreboard should be disabled for CTG and earlier
-#else
- #define HW_SCOREBOARD // HW Scoreboard should be enabled for ILK and beyond
- #undef SW_SCOREBOARD // SW Scoreboard should be disabled for ILK and beyond
-#endif // DEV_CTG
-#endif // COMBINED_KERNEL
-
-//#define MONO // Build Monochrome kernels
-
-// Surface state definition
-//
-#define DESTY 0
-#define DESTUV 1
-#define REFYFM0 2
-#define REFYFM1 3
-#define REFYFM2 4
-#define REFYFM3 5
-#define REFYFM4 6
-#define REFYFM5 7
-#define REFYFM6 8
-#define REFYFM7 9
-#define REFYFM8 10
-#define REFYFM9 11
-#define REFYFM10 12
-#define REFYFM11 13
-#define REFYFM12 14
-#define REFYFM13 15
-#define REFYFM14 16
-#define REFYFM15 17
-#define REFUVFM0 18
-#define REFUVFM1 19
-#define REFUVFM2 20
-#define REFUVFM3 21
-#define REFUVFM4 22
-#define REFUVFM5 23
-#define REFUVFM6 24
-#define REFUVFM7 25
-#define REFUVFM8 26
-#define REFUVFM9 27
-#define REFUVFM10 28
-#define REFUVFM11 29
-#define REFUVFM12 30
-#define REFUVFM13 31
-#define REFUVFM14 32
-#define REFUVFM15 33
-
-.default_execution_size (16)
-.default_register_type :ub
-
-// ----------- Common constant definitions ------------
-//
-// Bit position constants
-//
-#define BIT0 0x01
-#define BIT1 0x02
-#define BIT2 0x04
-#define BIT3 0x08
-#define BIT4 0x10
-#define BIT5 0x20
-#define BIT6 0x40
-#define BIT7 0x80
-#define BIT8 0x0100
-#define BIT9 0x0200
-#define BIT10 0x0400
-#define BIT11 0x0800
-#define BIT12 0x1000
-#define BIT13 0x2000
-#define BIT14 0x4000
-#define BIT15 0x8000
-#define BIT16 0x00010000
-#define BIT17 0x00020000
-#define BIT18 0x00040000
-#define BIT19 0x00080000
-#define BIT20 0x00100000
-#define BIT21 0x00200000
-#define BIT22 0x00400000
-#define BIT23 0x00800000
-#define BIT24 0x01000000
-#define BIT25 0x02000000
-#define BIT26 0x04000000
-#define BIT27 0x08000000
-#define BIT28 0x10000000
-#define BIT29 0x20000000
-#define BIT30 0x40000000
-#define BIT31 0x80000000
-
-#define GRFWIB 32 // GRF register width in byte
-#define GRFWIW 16 // GRF register width in word
-#define GRFWID 8 // GRF register width in dword
-
-#define INST_SIZE 16 // Instruction size = 128b = 16 Bytes
-
-#define REGION(Width,HStride) <Width*HStride;Width,HStride>
-
-#define NULLREG null<1>:ud
-#define NULLREGW null<1>:w
-
-#define TOP_FIELD 0
-#define BOTTOM_FIELD 1
-
-// M2 - M9 for date writing message payload
-.declare MSGPAYLOAD Base=m2 ElementSize=1 SrcRegion=REGION(16,1) Type=ub
-.declare MSGPAYLOADB Base=m2 ElementSize=1 SrcRegion=REGION(16,1) Type=ub
-.declare MSGPAYLOADW Base=m2 ElementSize=2 SrcRegion=REGION(16,1) Type=uw
-.declare MSGPAYLOADD Base=m2 ElementSize=4 SrcRegion=REGION(8,1) Type=ud
-
-// ----------- Common Message Descriptor ------------
-//
-#ifdef DEV_ILK
-#define MSG_GW 0x03 // Message Gateway Extended Message Descriptor,
-#define DAPREAD 0x04 // Data Port Read Extended Message Descriptor,
-#define DAPWRITE 0x05 // Data Port Write Extended Message Descriptor,
-#define TS 0x07 // Thread Spawner Extended Message Descriptor
-#define TS_EOT 0x27 // End of Thread Extended Message Descriptor
-
-#define EOTMSGDSC 0x02000010 // End of Thread Message Descriptor, don't deference URB handle
-
-// Data Port Message Descriptor
-#define DWBRMSGDSC_RC 0x02086000 // DWORD Block Read Message Descriptor, reading from render cache = 6.
-#define DWBRMSGDSC_RC_TF 0x02086600 // DWORD Block Read Message Descriptor, reading from render cache = 6.
-#define DWBRMSGDSC_RC_BF 0x02086700 // DWORD Block Read Message Descriptor, reading from render cache = 6.
-#define DWBRMSGDSC_SC 0x0208A000 // DWORD Block Read Message Descriptor, reading from sampler cache = A.
-#define DWBRMSGDSC_SC_TF 0x0208E600 // DWORD Block Read Message Descriptor, reading top field from field mode sampler cache.
-#define DWBRMSGDSC_SC_BF 0x0208E700 // DWORD Block Read Message Descriptor, reading bottom field from field mode sampler cache.
-
-#define DWBWMSGDSC 0x02082000 // DWORD Block Write Message Descriptor
-#define DWBWMSGDSC_WC 0x0218A000 // DWORD Block Write Message Descriptor + write commit
-
-// Enable Write Commit writeback mesage
-#define ENWRCOM 0x00108000 // Enable "write commit" and set response length = 1
-
-// Thread Spawner Message Descriptor
-#define TSMSGDSC 0x02000011
-
-// Message Gateway Message Descriptors
-#define OGWMSGDSC 0x02000000 // OpenGateway Message Descriptor
-#define CGWMSGDSC 0x02000001 // CloseGateway Message Descriptor
-#define FWDMSGDSC 0x02000002 // ForwardMsg Message Descriptor
-
-#define NOTIFYMSG 0x00008000 // Send notification with ForwardMsg message
-
-#define RESP_LEN(len) 0x100000*len
-#define MSG_LEN(len) 0x2000000*len
-
-#else // Pre DEV_ILK
-
-#define MSG_GW
-#define DAPREAD
-#define DAPWRITE
-#define TS
-#define TS_EOT
-
-#define EOTMSGDSC 0x87100010 // End of Thread Message Descriptor, don't deference URB handle
-
-// Data Port Message Descriptor
-#define DWBRMSGDSC_RC 0x04106000 // DWORD Block Read Message Descriptor, reading from render cache = 6.
-#define DWBRMSGDSC_RC_TF 0x04106600 // DWORD Block Read Message Descriptor, reading from render cache = 6.
-#define DWBRMSGDSC_RC_BF 0x04106700 // DWORD Block Read Message Descriptor, reading from render cache = 6.
-#define DWBRMSGDSC_SC 0x0410A000 // DWORD Block Read Message Descriptor, reading from sampler cache = A.
-#define DWBRMSGDSC_SC_TF 0x0410A600 // DWORD Block Read Message Descriptor, reading top field from field mode sampler cache.
-#define DWBRMSGDSC_SC_BF 0x0410A700 // DWORD Block Read Message Descriptor, reading bottom field from field mode sampler cache.
-
-#define DWBWMSGDSC 0x05102000 // DWORD Block Write Message Descriptor
-#define DWBWMSGDSC_WC 0x0511A000 // DWORD Block Write Message Descriptor + write commit
-
-// Enable Write Commit writeback mesage
-#define ENWRCOM 0x00018000 // Enable "write commit" and set response length = 1
-
-// Thread Spawner Message Descriptor
-#define TSMSGDSC 0x07100011
-
-// Message Gateway Message Descriptors
-#define OGWMSGDSC 0x03100000 // OpenGateway Message Descriptor
-#define CGWMSGDSC 0x03100001 // CloseGateway Message Descriptor
-#define FWDMSGDSC 0x03100002 // ForwardMsg Message Descriptor
-
-#define NOTIFYMSG 0x00008000 // Send notification with ForwardMsg message
-#define ACKREQMSG 0x00014000 // Acknowledgement required so response length should be 1
-
-#define RESP_LEN(len) 0x10000*len
-#define MSG_LEN(len) 0x100000*len
-
-#endif // DEV_ILK
-
-// Enable frame/field selection in message descriptor
-#define ENMSGDSCFM 0x400 // Enable MSGDSC to select frame surface
-#define ENMSGDSCTF 0x600 // Enable MSGDSC to select top field surface
-#define ENMSGDSCBF 0x700 // Enable MSGDSC to select bottom field surface
-
-// ----------- Message related register ------------
-//
-#define MSGHDR m1 // Message Payload Header
-#define MSGHDRY m1 // Message Payload Header register for Y data
-#define MSGHDRY0 m1 // Message Payload Header register for Y data
-#define MSGHDRY1 m2 // Message Payload Header register for Y data
-#define MSGHDRY2 m3 // Message Payload Header register for Y data
-#define MSGHDRY3 m4 // Message Payload Header register for Y data
-#define MSGHDRUV m5 // Message Payload Header register for U/V data
-#define MSGSRC r62 // Message source register, should never be used for other purposes
-#define MSGDSC a0.0:ud // Message Descriptor register (type DWORD)
-
-#define MH_ORI MSGSRC.0 // DWORD block R/W message header block offset
-#define MH_ORIX MSGSRC.0 // DWORD block R/W message header X offset
-#define MH_ORIY MSGSRC.1 // DWORD block R/W message header Y offset
-#define MH_SIZE MSGSRC.2 // DWORD block R/W message header block width & height
-
-// Data necessary for kernel operations
-//
-// Address registers used as pointers
-//
-// Note: Please keep the register order as is since they are used in compressed instructions
-//
-#define PPREDBUF_Y a0.4 // Pointer to predicted Y picture
-#define PPREDBUF_Y1 a0.5 // Pointer to predicted Y picture for extended instruction
-
-#define PPREDBUF_UV a0.4 // Pointer to predicted U/V picture
-#define PPREDBUF_UV1 a0.5 // Pointer to predicted U/V picture for extended instruction
-
-#define PDECBUF a0.4 // Pointer to decoded picture data
-#define PDECBUF_UD a0.2 // Pointer to decoded picture data in DWORD unit
-
-// ----------- R63 is reserved for global variables ------------
-//
-// Note: Don't program it with values other than what are defined here.
-
-#define G_REG r63
-
-#define RETURN_REG G_REG.0 // Return pointer for all sub-routine calls (type DWORD)
-#define RETURN_REG1 G_REG.1 // Return pointer for second-level calls
-
-#define I_ORIX G_REG.13 // :uw, H. origin of the macroblock in pixel unit, don't overwrite in-line data
-#define I_ORIY G_REG.14 // :uw, V. origin of the macroblock in pixel unit, don't overwrite in-line data
-
-// Macros
-//
-// Note: For macros that require multiple line expansion, insert "\n" at the end of each line.
-//
-#define GRF(reg) r##reg
-#ifdef DEV_ILK
-#define END_THREAD send (8) NULLREG MSGHDR r0:ud TS_EOT EOTMSGDSC
-#else
-#define END_THREAD send (8) NULLREG MSGHDR r0:ud EOTMSGDSC
-#endif // DEV_ILK
-
-#define CALL(subFunc, skipInst) add (1) RETURN_REG<1>:ud ip:ud (1+skipInst)*INST_SIZE \n\
- jmpi (1) subFunc
-
-#define CALL_1(subFunc, skipInst) add (1) RETURN_REG1<1>:ud ip:ud (1+skipInst)*INST_SIZE \n\
- jmpi (1) subFunc
-
-#define RETURN mov (1) ip:ud RETURN_REG<0;1,0>:ud // Return to calling module
-#define RETURN_1 mov (1) ip:ud RETURN_REG1<0;1,0>:ud // Return to second-level calling module
- // To support iterative calling
-#ifdef SW_SCOREBOARD
-
-#ifdef DEV_CTG_A
- #define LEADING_THREAD 1 // For CTG A, no SRT is needed. Only PRT is necessary
-#else
- #define LEADING_THREAD 0 // For CTG B0 and beyond, PRT doesn't take into debug count
- #define DOUBLE_SB // Scoreboard size needs to be doubled
-#endif
-
-#ifdef DOUBLE_SB // Scoreboard size needs to be doubled
- #define SB_MASK 0x1ff // Scoreboard wrap-around mask (for 512 entries)
-#else
- #define SB_MASK 0xff // Scoreboard wrap-around mask (for 256 entries)
-#endif // defined(DOUBLE_SB)
-
-// Scoreboard related definitions
-
-#define TEMPX r50
-#define TEMPY r51
-#define DELTA r52
-
-#define M05_STORE r0.13 // :uw, reuse r0.6:ud upper-word to store M0.5 header information for scoreboard
-
-
-#endif // SW_SCOREBOARD
-
-// End of header.inc
-
-#endif // !defined(__HEADER__)
-
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-05 10:22:53 +0000