diff options
| -rw-r--r-- | po/ru.po | 196 |
1 files changed, 64 insertions, 132 deletions
@@ -2,8 +2,8 @@ # Copyright (C) 2010 pulseaudio # This file is distributed under the same license as the pulseaudio package. # Leonid Kurbatov <llenchikk@rambler.ru>, 2010. -# -# +# +# msgid "" msgstr "" "Project-Id-Version: pulseaudio.master-tx\n" @@ -24,28 +24,24 @@ msgstr "%s %s" #: ../src/modules/alsa/alsa-util.c:1106 #, c-format msgid "" -"snd_pcm_avail() returned a value that is exceptionally large: %lu bytes (%lu " -"ms).\n" -"Most likely this is a bug in the ALSA driver '%s'. Please report this issue " -"to the ALSA developers." +"snd_pcm_avail() returned a value that is exceptionally large: %lu bytes (%lu ms).\n" +"Most likely this is a bug in the ALSA driver '%s'. Please report this issue to the ALSA developers." msgstr "" +"snd_pcm_avail() возвращает значение, которое является исключительно большим: %lu байт (%lu мс).\n" +"Вероятно, это ошибка в драйвере ALSA '%s'. Пожалуйста, сообщите об этой проблеме разработчикам ALSA." #: ../src/modules/alsa/alsa-util.c:1147 #, c-format msgid "" -"snd_pcm_delay() returned a value that is exceptionally large: %li bytes (%s%" -"lu ms).\n" -"Most likely this is a bug in the ALSA driver '%s'. Please report this issue " -"to the ALSA developers." +"snd_pcm_delay() returned a value that is exceptionally large: %li bytes (%s%lu ms).\n" +"Most likely this is a bug in the ALSA driver '%s'. Please report this issue to the ALSA developers." msgstr "" #: ../src/modules/alsa/alsa-util.c:1194 #, c-format msgid "" -"snd_pcm_mmap_begin() returned a value that is exceptionally large: %lu bytes " -"(%lu ms).\n" -"Most likely this is a bug in the ALSA driver '%s'. Please report this issue " -"to the ALSA developers." +"snd_pcm_mmap_begin() returned a value that is exceptionally large: %lu bytes (%lu ms).\n" +"Most likely this is a bug in the ALSA driver '%s'. Please report this issue to the ALSA developers." msgstr "" #: ../src/modules/module-always-sink.c:39 @@ -61,12 +57,7 @@ msgid "Virtual LADSPA sink" msgstr "" #: ../src/modules/module-ladspa-sink.c:53 -msgid "" -"sink_name=<name for the sink> sink_properties=<properties for the sink> " -"master=<name of sink to filter> format=<sample format> rate=<sample rate> " -"channels=<number of channels> channel_map=<channel map> plugin=<ladspa " -"plugin name> label=<ladspa plugin label> control=<comma seperated list of " -"input control values>" +msgid "sink_name=<name for the sink> sink_properties=<properties for the sink> master=<name of sink to filter> format=<sample format> rate=<sample rate> channels=<number of channels> channel_map=<channel map> plugin=<ladspa plugin name> label=<ladspa plugin label> control=<comma seperated list of input control values>" msgstr "" #: ../src/modules/module-null-sink.c:55 @@ -183,9 +174,7 @@ msgid "Failed to kill daemon: %s" msgstr "" #: ../src/daemon/main.c:571 -msgid "" -"This program is not intended to be run as root (unless --system is " -"specified)." +msgid "This program is not intended to be run as root (unless --system is specified)." msgstr "" #: ../src/daemon/main.c:573 @@ -338,12 +327,9 @@ msgstr "" #: ../src/daemon/main.c:792 msgid "" -"OK, so you are running PA in system mode. Please note that you most likely " -"shouldn't be doing that.\n" -"If you do it nonetheless then it's your own fault if things don't work as " -"expected.\n" -"Please read http://pulseaudio.org/wiki/WhatIsWrongWithSystemMode for an " -"explanation why system mode is usually a bad idea." +"OK, so you are running PA in system mode. Please note that you most likely shouldn't be doing that.\n" +"If you do it nonetheless then it's your own fault if things don't work as expected.\n" +"Please read http://pulseaudio.org/wiki/WhatIsWrongWithSystemMode for an explanation why system mode is usually a bad idea." msgstr "" #: ../src/daemon/main.c:809 @@ -355,9 +341,7 @@ msgid "Fresh high-resolution timers available! Bon appetit!" msgstr "" #: ../src/daemon/main.c:821 -msgid "" -"Dude, your kernel stinks! The chef's recommendation today is Linux with high-" -"resolution timers enabled!" +msgid "Dude, your kernel stinks! The chef's recommendation today is Linux with high-resolution timers enabled!" msgstr "" #: ../src/daemon/main.c:844 @@ -395,48 +379,37 @@ msgid "" " --dump-conf Dump default configuration\n" " --dump-modules Dump list of available modules\n" " --dump-resample-methods Dump available resample methods\n" -" --cleanup-shm Cleanup stale shared memory " -"segments\n" -" --start Start the daemon if it is not " -"running\n" +" --cleanup-shm Cleanup stale shared memory segments\n" +" --start Start the daemon if it is not running\n" " -k --kill Kill a running daemon\n" -" --check Check for a running daemon (only " -"returns exit code)\n" +" --check Check for a running daemon (only returns exit code)\n" "\n" "OPTIONS:\n" " --system[=BOOL] Run as system-wide instance\n" " -D, --daemonize[=BOOL] Daemonize after startup\n" " --fail[=BOOL] Quit when startup fails\n" " --high-priority[=BOOL] Try to set high nice level\n" -" (only available as root, when SUID " -"or\n" +" (only available as root, when SUID or\n" " with elevated RLIMIT_NICE)\n" " --realtime[=BOOL] Try to enable realtime scheduling\n" -" (only available as root, when SUID " -"or\n" +" (only available as root, when SUID or\n" " with elevated RLIMIT_RTPRIO)\n" -" --disallow-module-loading[=BOOL] Disallow module user requested " -"module\n" +" --disallow-module-loading[=BOOL] Disallow module user requested module\n" " loading/unloading after startup\n" " --disallow-exit[=BOOL] Disallow user requested exit\n" -" --exit-idle-time=SECS Terminate the daemon when idle and " -"this\n" +" --exit-idle-time=SECS Terminate the daemon when idle and this\n" " time passed\n" -" --module-idle-time=SECS Unload autoloaded modules when idle " -"and\n" +" --module-idle-time=SECS Unload autoloaded modules when idle and\n" " this time passed\n" -" --scache-idle-time=SECS Unload autoloaded samples when idle " -"and\n" +" --scache-idle-time=SECS Unload autoloaded samples when idle and\n" " this time passed\n" " --log-level[=LEVEL] Increase or set verbosity level\n" " -v Increase the verbosity level\n" " --log-target={auto,syslog,stderr} Specify the log target\n" -" --log-meta[=BOOL] Include code location in log " -"messages\n" +" --log-meta[=BOOL] Include code location in log messages\n" " --log-time[=BOOL] Include timestamps in log messages\n" " --log-backtrace=FRAMES Include a backtrace in log messages\n" -" -p, --dl-search-path=PATH Set the search path for dynamic " -"shared\n" +" -p, --dl-search-path=PATH Set the search path for dynamic shared\n" " objects (plugins)\n" " --resample-method=METHOD Use the specified resampling method\n" " (See --dump-resample-methods for\n" @@ -447,12 +420,10 @@ msgid "" " --disable-shm[=BOOL] Disable shared memory support.\n" "\n" "STARTUP SCRIPT:\n" -" -L, --load=\"MODULE ARGUMENTS\" Load the specified plugin module " -"with\n" +" -L, --load=\"MODULE ARGUMENTS\" Load the specified plugin module with\n" " the specified argument\n" " -F, --file=FILENAME Run the specified script\n" -" -C Open a command line on the running " -"TTY\n" +" -C Open a command line on the running TTY\n" " after startup\n" "\n" " -n Don't load default script file\n" @@ -467,9 +438,7 @@ msgid "--fail expects boolean argument" msgstr "" #: ../src/daemon/cmdline.c:264 -msgid "" -"--log-level expects log level argument (either numeric in range 0..4 or one " -"of debug, info, notice, warn, error)." +msgid "--log-level expects log level argument (either numeric in range 0..4 or one of debug, info, notice, warn, error)." msgstr "" #: ../src/daemon/cmdline.c:276 @@ -632,9 +601,7 @@ msgid "Failed to open configuration file: %s" msgstr "" #: ../src/daemon/daemon-conf.c:562 -msgid "" -"The specified default channel map has a different number of channels than " -"the specified default number of channels." +msgid "The specified default channel map has a different number of channels than the specified default number of channels." msgstr "" #: ../src/daemon/daemon-conf.c:638 @@ -1225,48 +1192,29 @@ msgid "" "\n" " -v, --verbose Enable verbose operations\n" "\n" -" -s, --server=SERVER The name of the server to connect " -"to\n" -" -d, --device=DEVICE The name of the sink/source to " -"connect to\n" -" -n, --client-name=NAME How to call this client on the " -"server\n" -" --stream-name=NAME How to call this stream on the " -"server\n" -" --volume=VOLUME Specify the initial (linear) volume " -"in range 0...65536\n" -" --rate=SAMPLERATE The sample rate in Hz (defaults to " -"44100)\n" -" --format=SAMPLEFORMAT The sample type, one of s16le, " -"s16be, u8, float32le,\n" -" float32be, ulaw, alaw, s32le, s32be, " -"s24le, s24be,\n" -" s24-32le, s24-32be (defaults to " -"s16ne)\n" -" --channels=CHANNELS The number of channels, 1 for mono, " -"2 for stereo\n" +" -s, --server=SERVER The name of the server to connect to\n" +" -d, --device=DEVICE The name of the sink/source to connect to\n" +" -n, --client-name=NAME How to call this client on the server\n" +" --stream-name=NAME How to call this stream on the server\n" +" --volume=VOLUME Specify the initial (linear) volume in range 0...65536\n" +" --rate=SAMPLERATE The sample rate in Hz (defaults to 44100)\n" +" --format=SAMPLEFORMAT The sample type, one of s16le, s16be, u8, float32le,\n" +" float32be, ulaw, alaw, s32le, s32be, s24le, s24be,\n" +" s24-32le, s24-32be (defaults to s16ne)\n" +" --channels=CHANNELS The number of channels, 1 for mono, 2 for stereo\n" " (defaults to 2)\n" -" --channel-map=CHANNELMAP Channel map to use instead of the " -"default\n" -" --fix-format Take the sample format from the sink " -"the stream is\n" +" --channel-map=CHANNELMAP Channel map to use instead of the default\n" +" --fix-format Take the sample format from the sink the stream is\n" " being connected to.\n" -" --fix-rate Take the sampling rate from the sink " -"the stream is\n" +" --fix-rate Take the sampling rate from the sink the stream is\n" " being connected to.\n" -" --fix-channels Take the number of channels and the " -"channel map\n" -" from the sink the stream is being " -"connected to.\n" +" --fix-channels Take the number of channels and the channel map\n" +" from the sink the stream is being connected to.\n" " --no-remix Don't upmix or downmix channels.\n" -" --no-remap Map channels by index instead of " -"name.\n" -" --latency=BYTES Request the specified latency in " -"bytes.\n" -" --process-time=BYTES Request the specified process time " -"per request in bytes.\n" -" --property=PROPERTY=VALUE Set the specified property to the " -"specified value.\n" +" --no-remap Map channels by index instead of name.\n" +" --latency=BYTES Request the specified latency in bytes.\n" +" --process-time=BYTES Request the specified process time per request in bytes.\n" +" --property=PROPERTY=VALUE Set the specified property to the specified value.\n" " --raw Record/play raw PCM data.\n" " --file-format=FFORMAT Record/play formatted PCM data.\n" " --list-file-formats List available file formats.\n" @@ -1342,9 +1290,7 @@ msgid "Failed to open audio file." msgstr "" #: ../src/utils/pacat.c:959 -msgid "" -"Warning: specified sample specification will be overwritten with " -"specification from file." +msgid "Warning: specified sample specification will be overwritten with specification from file." msgstr "" #: ../src/utils/pacat.c:962 ../src/utils/pactl.c:997 @@ -1365,8 +1311,7 @@ msgstr "" #: ../src/utils/pacat.c:1008 #, c-format -msgid "" -"Opening a %s stream with sample specification '%s' and channel map '%s'." +msgid "Opening a %s stream with sample specification '%s' and channel map '%s'." msgstr "" #: ../src/utils/pacat.c:1009 @@ -1449,8 +1394,7 @@ msgid "" "\n" " -h, --help Show this help\n" " --version Show version\n" -" -s, --server=SERVER The name of the server to connect " -"to\n" +" -s, --server=SERVER The name of the server to connect to\n" "\n" msgstr "" @@ -1762,10 +1706,8 @@ msgid "" " -h, --help Show this help\n" " --version Show version\n" "\n" -" -s, --server=SERVER The name of the server to connect " -"to\n" -" -n, --client-name=NAME How to call this client on the " -"server\n" +" -s, --server=SERVER The name of the server to connect to\n" +" -n, --client-name=NAME How to call this client on the server\n" msgstr "" #: ../src/utils/pactl.c:933 @@ -1813,14 +1755,11 @@ msgid "You have to specify a module index" msgstr "" #: ../src/utils/pactl.c:1090 -msgid "" -"You may not specify more than one sink. You have to specify a boolean value." +msgid "You may not specify more than one sink. You have to specify a boolean value." msgstr "" #: ../src/utils/pactl.c:1103 -msgid "" -"You may not specify more than one source. You have to specify a boolean " -"value." +msgid "You may not specify more than one source. You have to specify a boolean value." msgstr "" #: ../src/utils/pactl.c:1115 @@ -1884,8 +1823,7 @@ msgid "" "\n" " -d Show current PulseAudio data attached to X11 display (default)\n" " -e Export local PulseAudio data to X11 display\n" -" -i Import PulseAudio data from X11 display to local environment " -"variables and cookie file.\n" +" -i Import PulseAudio data from X11 display to local environment variables and cookie file.\n" " -r Remove PulseAudio data from X11 display\n" msgstr "" @@ -1993,23 +1931,17 @@ msgstr "" #: ../src/modules/alsa/alsa-sink.c:530 ../src/modules/alsa/alsa-sink.c:689 #, c-format msgid "" -"ALSA woke us up to write new data to the device, but there was actually " -"nothing to write!\n" -"Most likely this is a bug in the ALSA driver '%s'. Please report this issue " -"to the ALSA developers.\n" -"We were woken up with POLLOUT set -- however a subsequent snd_pcm_avail() " -"returned 0 or another value < min_avail." +"ALSA woke us up to write new data to the device, but there was actually nothing to write!\n" +"Most likely this is a bug in the ALSA driver '%s'. Please report this issue to the ALSA developers.\n" +"We were woken up with POLLOUT set -- however a subsequent snd_pcm_avail() returned 0 or another value < min_avail." msgstr "" #: ../src/modules/alsa/alsa-source.c:506 ../src/modules/alsa/alsa-source.c:656 #, c-format msgid "" -"ALSA woke us up to read new data from the device, but there was actually " -"nothing to read!\n" -"Most likely this is a bug in the ALSA driver '%s'. Please report this issue " -"to the ALSA developers.\n" -"We were woken up with POLLIN set -- however a subsequent snd_pcm_avail() " -"returned 0 or another value < min_avail." +"ALSA woke us up to read new data from the device, but there was actually nothing to read!\n" +"Most likely this is a bug in the ALSA driver '%s'. Please report this issue to the ALSA developers.\n" +"We were woken up with POLLIN set -- however a subsequent snd_pcm_avail() returned 0 or another value < min_avail." msgstr "" #: ../src/modules/alsa/module-alsa-card.c:152 |