# POD POD (plan old data) is a sort of data container. It is comparable to DBus Variant or LV2 Atom. A POD can express nested structures of Objects (with properties), Vectors, Arrays, sequences and various primitives types. All information in the POD is layed out sequentially in memory and can be written directly to storage or exchanged between processes or threads without additional marshalling.. Each POD is made of a 32 bits size followed by a 32 bits type field, followed by the pod contents. This makes it possible to skip over unknown POD type. The POD start is always aligned to 8 bytes. PODs can be efficiently constructed and parsed in real-time threads without requiring memory allocations. PODs use the SPA type system for the basic types and containers. See the SPA types for more info. ## Types PODs can contain a number of basic SPA types: * `SPA_TYPE_None`: no value or a NULL pointer. * `SPA_TYPE_Bool`: a boolean value * `SPA_TYPE_Id`: an enumerated value * `SPA_TYPE_Int`, `SPA_TYPE_Long`, `SPA_TYPE_Float`, `SPA_TYPE_Double`: various numerial types, 32 and 64 bits. * `SPA_TYPE_String`: a string * `SPA_TYPE_Bytes`: a byte array * `SPA_TYPE_Rectangle`: a rectangle with width and height * `SPA_TYPE_Fraction`: a fraction with numerator and denominator * `SPA_TYPE_Bitmap`: an array of bits PODs can be grouped together in these container types: * `SPA_TYPE_Array`: an array of equal sized objects * `SPA_TYPE_Struct`: a collection of types and objects * `SPA_TYPE_Object`: an object with properties * `SPA_TYPE_Sequence`: a timed sequence of PODs PODs can also contain some extra types: * `SPA_TYPE_Pointer`: a typed pointer in memory * `SPA_TYPE_Fd`: a file descriptor * `SPA_TYPE_Choice`: a choice of values * `SPA_TYPE_Pod`: a generic type for the POD itself # Constructing a POD A POD is usually constructed with a `struct spa_pod_builder`. The builder needs to be initialized with a memory region to write into. It is also possible to dynamically grow the memory as needed. The most common way to construct a POD is on the stack. This does not require any memory allocations. The size of the POD can be estimated pretty easily and it the buffer is not large enough, an appropriate error will be generated. The code fragment below initializes a pod builder to write into the stack allocated buffer. ```c uint8_t buffer[4096]; struct spa_pod_builder b; spa_pod_builder_init(&b, buffer, sizeof(buffer)); ``` Next we need to write some object into the builder. Let's write a simple struct with an Int and Float in it. Structs are comparable to JSON arrays. ```c struct spa_pod_frame f; spa_pod_builder_push_struct(&b, &f); ``` First we open the struct container, the `struct spa_pod_frame` keeps track of the container context. Next we add some values to the container like this: ```c spa_pod_builder_int(&b, 5); spa_pod_builder_float(&b, 3.1415f); ``` The we close the container by popping the frame again: ```c struct spa_pod *pod; pod = spa_pod_builder_pop(&b, &f); ``` `spa_pod_builder_pop()` returns a reference to the object we completed on the stack. ## Using varags builder. We can also use the following construct to make POD objects: ```c spa_pod_builder_push_struct(&b, &f); spa_pod_builder_add(&b, SPA_POD_Int(5), SPA_POD_Float(3.1415f)); pod = spa_pod_builder_pop(&b, &f); ``` Or even shorter: ```c pod = spa_pod_builder_add_struct(&b, SPA_POD_Int(5), SPA_POD_Float(3.1415f)); ``` It's not possible to use the varargs builder to make a Sequence or Array, use the normal builder methods for that. ## Making objects POD objects are containers for properties and are comparable to JSON objects. Start by pushing an object: ```c spa_pod_builder_push_object(&b, &f, SPA_TYPE_OBJECT_Props, SPA_PARAM_Props); ``` An object requires an object type (`SPA_TYPE_OBJECT_Props`) and a context id (`SPA_PARAM_Props`). The object type defines the properties that can be added to the object and their meaning. The SPA type system allows you to make this connection (See the type system). Next we can push some properties in the object: ```c spa_pod_builder_prop(&b, SPA_PROP_device, 0); spa_pod_builder_string(&b, "hw:0"); spa_pod_builder_prop(&b, SPA_PROP_frequency, 0); spa_pod_builder_float(&b, 440.0); ``` As can be seen, we always need to push a prop (with key and flags) and then the associated value. For performance reasons it is a good idea to always push (and parse) the object keys in ascending order. Don't forget to pop the result when the object is finished: ```c pod = spa_pod_builder_pop(&b, &f); ``` There is a shortcut for making objects: ```c pod = spa_pod_builder_add_object(&b, SPA_TYPE_OBJECT_Props, SPA_PARAM_Props, SPA_PROP_device, SPA_POD_String("hw:0"), SPA_PROP_frequency, SPA_POD_Float(440.0f)); ``` ## Choice values It is possible to express ranges or enumerations of possible values for properties (and to some extend structs). This is achieved with Choice values. Choice values are really just a choice type and an array of choice values (of the same type). Depending on the choice type, the array values are interpreted in different ways: * `SPA_CHOICE_None`: no choice, first value is current * `SPA_CHOICE_Range`: range: default, min, max * `SPA_CHOICE_Step`: range with step: default, min, max, step * `SPA_CHOICE_Enum`: enum: default, alternative,... * `SPA_CHOICE_Flags`: bitmask of flags Let's illustrate this with a Props object that specifies a range of possible values for the frequency: ```c struct spa_pod_frame f2; spa_pod_builder_push_object(&b, &f, SPA_TYPE_OBJECT_Props, SPA_PARAM_Props); spa_pod_builder_prop(&b, SPA_PROP_frequency, 0); spa_pod_builder_push_choice(&b, &f2, SPA_CHOICE_Range, 0); spa_pod_builder_float(&b, 440.0); /* default */ spa_pod_builder_float(&b, 110.0); /* min */ spa_pod_builder_float(&b, 880.0); /* min */ pod = spa_pod_builder_pop(&b, &f2); pod = spa_pod_builder_pop(&b, &f); ``` As you can see, first push the choice as a Range, then the values. A Range choice expects at least 3 values, the default value, mininum and maximum values. There is a shotcut for this as well using varargs: ```c pod = spa_pod_builder_add_object(&b, SPA_TYPE_OBJECT_Props, SPA_PARAM_Props, SPA_PROP_frequency, SPA_POD_CHOICE_RANGE_Float(440.0f, 110.0f, 880.0f)); ``` ## Choice examples This is a description of a possible `SPA_TYPE_OBJECT_Format` as used when enumerating allowed formats (`SPA_PARAM_EnumFormat`) in SPA objects: ```c pod = spa_pod_builder_add_object(&b, SPA_TYPE_OBJECT_Format, SPA_PARAM_EnumFormat, /* specify the media type and subtype */ SPA_FORMAT_mediaType, SPA_POD_Id(SPA_MEDIA_TYPE_audio), SPA_FORMAT_mediaSubtype, SPA_POD_Id(SPA_MEDIA_SUBTYPE_raw), /* audio/raw properties */ SPA_FORMAT_AUDIO_format, SPA_POD_CHOICE_ENUM_Id( SPA_AUDIO_FORMAT_S16, /* default */ SPA_AUDIO_FORMAT_S16, /* alternative1 */ SPA_AUDIO_FORMAT_S32, /* alternative2 */ SPA_AUDIO_FORMAT_f32 /* alternative3 */ ), SPA_FORMAT_AUDIO_rate, SPA_POD_CHOICE_RANGE_Int( 44100, /* default */ 8000, /* min */ 192000 /* max */ ), SPA_FORMAT_AUDIO_channels, SPA_POD_Int(2)); ``` ## Fixate We can remove all choice values from the object with the `spa_pod_object_fixate()` method. This modifies the pod in-place and sets all choice properties to `SPA_CHOICE_None`, forcing the default value as the only available value in the choice. Running fixate on our previous example would result in an object equivalent to: ```c pod = spa_pod_builder_add_object(&b, SPA_TYPE_OBJECT_Format, SPA_PARAM_EnumFormat, /* specify the media type and subtype */ SPA_FORMAT_mediaType, SPA_POD_Id(SPA_MEDIA_TYPE_audio), SPA_FORMAT_mediaSubtype, SPA_POD_Id(SPA_MEDIA_SUBTYPE_raw), /* audio/raw properties */ SPA_FORMAT_AUDIO_format, SPA_POD_Id(SPA_AUDIO_FORMAT_S16), SPA_FORMAT_AUDIO_rate, SPA_POD_Int(44100), SPA_FORMAT_AUDIO_channels, SPA_POD_Int(2)); ``` # Parsing a POD Parsing a POD usually consists of * validating if raw bytes + size can contain a valid pod * inspecting the type of a pod * looping over the items in an object or struct * getting data out of PODs. ## Validating bytes Use `spa_pod_from_data()` to check if maxsize of bytes in data contain a POD at the size bytes starting at offset. This function checks that the POD size will fit and not overflow. ```c struct spa_pod *pod; pod = spa_pod_from_data(data, maxsize, offset, size); ``` ## Checking the type of POD Use one of `spa_pod_is_bool()`, `spa_pod_is_int()`, etc to check for the type of the pod. For simple (non-container) types, `spa_pod_get_bool()`, `spa_pod_get_int()` etc can be used to extract the value of the pod. `spa_pod_is_object_type()` can be used to check if the POD contains an object of the expected type. ## Struct fields To iterate over the fields of a Struct use: ```c struct spa_pod *pod, *obj; SPA_POD_STRUCT_FOREACH(obj, pod) { printf("field type:%d\n", pod->type); } ``` For parsing Structs it is usually much easier to use the parser below. ## Object Properties To iterate over the properies in an object you can do: ```c struct spa_pod_prop *prop; struct spa_pod_object *obj = (struct spa_pod_object*)pod; SPA_POD_OBJECT_FOREACH(pod, prop) { printf("prop key:%d\n", prop->key); } ``` There is a function to retrieve the property for a certain key in the object. If the properties of the object are in ascending order, you can start searching from the previous key. ```c struct spa_pod_prop *prop; prop = spa_pod_find_prop(obj, NULL, SPA_FORMAT_AUDIO_format); /* .. use first prop */ prop = spa_pod_find_prop(obj, prop, SPA_FORMAT_AUDIO_rate); /* .. use next prop */ ``` ## Parser Similar to the builder, there is a parser object as well. It the fields in a struct are known, it is much easier to use the parser. Similarly, if the object type (and thus it's) keys are known, the parser is easier. First initialize a `struct spa_pod_parser`: ```c struct spa_pod_parser p; spa_pod_parser_pod(&p, obj); ``` You can then enter containers such as objects or structs with a push operation: ```c struct spa_pod_frame f; spa_pod_parser_push_struct(&p, &f); ``` You need to store the context in a `struct spa_pod_frame` to be able to exit the container again later. You can then parse each field. The parser takes care of moving to the next field. ```c uint32_t id, val; spa_pod_parser_get_id(&p, &id); spa_pod_parser_get_int(&p, &val); ... ``` And finally exit the container again: ```c spa_pod_parser_pop(&p, &f); ``` ## Parser with variable arguments In most cases, parsing objects is easier with the variable argument functions. The parse function look like the mirror image of the builder functions. To parse a struct: ```c spa_pod_parser_get_struct(&p, SPA_POD_Id(&id), SPA_POD_Int(&val)); ``` To parse properties in an object: ```c uint32_t type, subtype, format, rate, channels; spa_pod_parser_get_object(&p, SPA_TYPE_OBJECT_Format, SPA_PARAM_EnumFormat, SPA_FORMAT_mediaType, SPA_POD_Id(&type), SPA_FORMAT_mediaSubtype, SPA_POD_Id(&subtype), SPA_FORMAT_AUDIO_format, SPA_POD_Id(&format), SPA_FORMAT_AUDIO_rate, SPA_POD_Int(&rate), SPA_FORMAT_AUDIO_channels, SPA_POD_Int(&channels)); ``` When parsing objects it is possible to have optional fields. You can make a field optional be parsing it with the `SPA_POD_OPT_` prefix for the type. In the next example, the rate and channels fields are optional and when they are not present, the variables will not be changed. ```c uint32_t type, subtype, format, rate = 0, channels = 0; spa_pod_parser_get_object(&p, SPA_TYPE_OBJECT_Format, SPA_PARAM_EnumFormat, SPA_FORMAT_mediaType, SPA_POD_Id(&type), SPA_FORMAT_mediaSubtype, SPA_POD_Id(&subtype), SPA_FORMAT_AUDIO_format, SPA_POD_Id(&format), SPA_FORMAT_AUDIO_rate, SPA_POD_OPT_Int(&rate), SPA_FORMAT_AUDIO_channels, SPA_POD_OPT_Int(&channels)); ``` It is not possible to parse a Sequence or Array with the parser. Use the iterator for this. ## Choice values The parser will handle Choice values as long as they are of type None. It will then parse the single value from the choice. When dealing with other choice values, it's possible to parse the property values into a `struct spa_pod` and then inspect the Choice manually, if needed. Here is an example of parsing the format values as a POD: ```c uint32_t type, subtype; struct spa_pod *format; spa_pod_parser_get_object(&p, SPA_TYPE_OBJECT_Format, SPA_PARAM_EnumFormat, SPA_FORMAT_mediaType, SPA_POD_Id(&type), SPA_FORMAT_mediaSubtype, SPA_POD_Id(&subtype), SPA_FORMAT_AUDIO_format, SPA_POD_Pod(&format)); ``` `spa_pod_get_values()` is a useful function. It returns a `struct spa_pod*` with and array of values. For normal PODs and Choice None values, it simply returns the POD and 1 value. For other Choice values it returns the Choice type and an array of values: ```c struct spa_pod *value; uint32_t n_vals, choice; value = spa_pod_get_values(pod, &n_vals, &choice); switch (choice) { case SPA_CHOICE_None: /* one single value */ break; case SPA_CHOICE_Range: /* array of values of type of pod, cast to right type * to iterate. */ uint32_t *v = SPA_POD_BODY(values); if (n_vals < 3) break; printf("default value: %u\n", v[0]); printf("min value: %u\n", v[1]); printf("max value: %u\n", v[2]); break; /* ... */ default: break; } ``` # Filter Given 2 pod objects of the same type (Object, Struct, ..) one can run a filter and generate a new pod that only contains values that are compatibe with both input pods. This is, for example, used to find a compatible format between two ports. As an example we can run a filter on two simple PODs: ```c pod = spa_pod_builder_add_object(&b, SPA_TYPE_OBJECT_Format, SPA_PARAM_EnumFormat, SPA_FORMAT_mediaType, SPA_POD_Id(SPA_MEDIA_TYPE_audio), SPA_FORMAT_mediaSubtype, SPA_POD_Id(SPA_MEDIA_SUBTYPE_raw), SPA_FORMAT_AUDIO_format, SPA_POD_CHOICE_ENUM_Id( SPA_AUDIO_FORMAT_S16, /* default */ SPA_AUDIO_FORMAT_S16, /* alternative1 */ SPA_AUDIO_FORMAT_S32, /* alternative2 */ SPA_AUDIO_FORMAT_f32 /* alternative3 */ )); filter = spa_pod_builder_add_object(&b, SPA_TYPE_OBJECT_Format, SPA_PARAM_EnumFormat, SPA_FORMAT_mediaType, SPA_POD_Id(SPA_MEDIA_TYPE_audio), SPA_FORMAT_mediaSubtype, SPA_POD_Id(SPA_MEDIA_SUBTYPE_raw), SPA_FORMAT_AUDIO_format, SPA_POD_CHOICE_ENUM_Id( SPA_AUDIO_FORMAT_S16, /* default */ SPA_AUDIO_FORMAT_S16, /* alternative1 */ SPA_AUDIO_FORMAT_f64 /* alternative2 */ )); struct spa_pod *result; if (spa_pod_filter(&b, &result, pod, filter) < 0) goto exit_error; ``` Filter will contain a POD equivalent to: ```c result = spa_pod_builder_add_object(&b, SPA_TYPE_OBJECT_Format, SPA_PARAM_EnumFormat, SPA_FORMAT_mediaType, SPA_POD_Id(SPA_MEDIA_TYPE_audio), SPA_FORMAT_mediaSubtype, SPA_POD_Id(SPA_MEDIA_SUBTYPE_raw), SPA_FORMAT_AUDIO_format, SPA_AUDIO_FORMAT_S16); ``` # POD layout Each POD has a 32 bits size field, followed by a 32 bits type field. The size field specifies the size following the type field. Each POD is aligned to an 8 byte boundary.