diff options
Diffstat (limited to 'm4')
| -rw-r--r-- | m4/Makefile.am | 5 | ||||
| -rw-r--r-- | m4/README | 3 | ||||
| -rw-r--r-- | m4/glib.m4 | 196 | ||||
| -rw-r--r-- | m4/gst-feature.m4 | 182 | ||||
| -rw-r--r-- | m4/gtk.m4 | 194 | ||||
| -rw-r--r-- | m4/pkg.m4 | 56 |
6 files changed, 0 insertions, 636 deletions
diff --git a/m4/Makefile.am b/m4/Makefile.am deleted file mode 100644 index 7c718864b..000000000 --- a/m4/Makefile.am +++ /dev/null @@ -1,5 +0,0 @@ -EXTRA_DIST = \ - glib.m4 \ - gst-feature.m4 \ - gtk.m4 \ - README diff --git a/m4/README b/m4/README deleted file mode 100644 index f04459850..000000000 --- a/m4/README +++ /dev/null @@ -1,3 +0,0 @@ -All aclocal .m4 files we need are put here and cat'd to acinclude.m4 in -the source root. Official ones (taken from the relevant devel packages) -are named as-is, unofficial ones (or changed ones) get a gst-prefix. diff --git a/m4/glib.m4 b/m4/glib.m4 deleted file mode 100644 index b8094bbfe..000000000 --- a/m4/glib.m4 +++ /dev/null @@ -1,196 +0,0 @@ -# Configure paths for GLIB -# Owen Taylor 97-11-3 - -dnl AM_PATH_GLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]]) -dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or -dnl gthread is specified in MODULES, pass to glib-config -dnl -AC_DEFUN(AM_PATH_GLIB, -[dnl -dnl Get the cflags and libraries from the glib-config script -dnl -AC_ARG_WITH(glib-prefix,[ --with-glib-prefix=PFX Prefix where GLIB is installed (optional)], - glib_config_prefix="$withval", glib_config_prefix="") -AC_ARG_WITH(glib-exec-prefix,[ --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)], - glib_config_exec_prefix="$withval", glib_config_exec_prefix="") -AC_ARG_ENABLE(glibtest, [ --disable-glibtest Do not try to compile and run a test GLIB program], - , enable_glibtest=yes) - - if test x$glib_config_exec_prefix != x ; then - glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix" - if test x${GLIB_CONFIG+set} != xset ; then - GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config - fi - fi - if test x$glib_config_prefix != x ; then - glib_config_args="$glib_config_args --prefix=$glib_config_prefix" - if test x${GLIB_CONFIG+set} != xset ; then - GLIB_CONFIG=$glib_config_prefix/bin/glib-config - fi - fi - - for module in . $4 - do - case "$module" in - gmodule) - glib_config_args="$glib_config_args gmodule" - ;; - gthread) - glib_config_args="$glib_config_args gthread" - ;; - esac - done - - AC_PATH_PROG(GLIB_CONFIG, glib-config, no) - min_glib_version=ifelse([$1], ,0.99.7,$1) - AC_MSG_CHECKING(for GLIB - version >= $min_glib_version) - no_glib="" - if test "$GLIB_CONFIG" = "no" ; then - no_glib=yes - else - GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags` - GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs` - glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` - glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` - glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` - if test "x$enable_glibtest" = "xyes" ; then - ac_save_CFLAGS="$CFLAGS" - ac_save_LIBS="$LIBS" - CFLAGS="$CFLAGS $GLIB_CFLAGS" - LIBS="$GLIB_LIBS $LIBS" -dnl -dnl Now check if the installed GLIB is sufficiently new. (Also sanity -dnl checks the results of glib-config to some extent -dnl - rm -f conf.glibtest - AC_TRY_RUN([ -#include <glib.h> -#include <stdio.h> -#include <stdlib.h> - -int -main () -{ - int major, minor, micro; - char *tmp_version; - - system ("touch conf.glibtest"); - - /* HP/UX 9 (%@#!) writes to sscanf strings */ - tmp_version = g_strdup("$min_glib_version"); - if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { - printf("%s, bad version string\n", "$min_glib_version"); - exit(1); - } - - if ((glib_major_version != $glib_config_major_version) || - (glib_minor_version != $glib_config_minor_version) || - (glib_micro_version != $glib_config_micro_version)) - { - printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", - $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version, - glib_major_version, glib_minor_version, glib_micro_version); - printf ("*** was found! If glib-config was correct, then it is best\n"); - printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n"); - printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); - printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); - printf("*** required on your system.\n"); - printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n"); - printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n"); - printf("*** before re-running configure\n"); - } - else if ((glib_major_version != GLIB_MAJOR_VERSION) || - (glib_minor_version != GLIB_MINOR_VERSION) || - (glib_micro_version != GLIB_MICRO_VERSION)) - { - printf("*** GLIB header files (version %d.%d.%d) do not match\n", - GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION); - printf("*** library (version %d.%d.%d)\n", - glib_major_version, glib_minor_version, glib_micro_version); - } - else - { - if ((glib_major_version > major) || - ((glib_major_version == major) && (glib_minor_version > minor)) || - ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro))) - { - return 0; - } - else - { - printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n", - glib_major_version, glib_minor_version, glib_micro_version); - printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n", - major, minor, micro); - printf("*** GLIB is always available from ftp://ftp.gtk.org.\n"); - printf("***\n"); - printf("*** If you have already installed a sufficiently new version, this error\n"); - printf("*** probably means that the wrong copy of the glib-config shell script is\n"); - printf("*** being found. The easiest way to fix this is to remove the old version\n"); - printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n"); - printf("*** correct copy of glib-config. (In this case, you will have to\n"); - printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); - printf("*** so that the correct libraries are found at run-time))\n"); - } - } - return 1; -} -],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) - CFLAGS="$ac_save_CFLAGS" - LIBS="$ac_save_LIBS" - fi - fi - if test "x$no_glib" = x ; then - AC_MSG_RESULT(yes) - ifelse([$2], , :, [$2]) - else - AC_MSG_RESULT(no) - if test "$GLIB_CONFIG" = "no" ; then - echo "*** The glib-config script installed by GLIB could not be found" - echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in" - echo "*** your path, or set the GLIB_CONFIG environment variable to the" - echo "*** full path to glib-config." - else - if test -f conf.glibtest ; then - : - else - echo "*** Could not run GLIB test program, checking why..." - CFLAGS="$CFLAGS $GLIB_CFLAGS" - LIBS="$LIBS $GLIB_LIBS" - AC_TRY_LINK([ -#include <glib.h> -#include <stdio.h> -], [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ], - [ echo "*** The test program compiled, but did not run. This usually means" - echo "*** that the run-time linker is not finding GLIB or finding the wrong" - echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your" - echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" - echo "*** to the installed location Also, make sure you have run ldconfig if that" - echo "*** is required on your system" - echo "***" - echo "*** If you have an old version installed, it is best to remove it, although" - echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" - echo "***" - echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that" - echo "*** came with the system with the command" - echo "***" - echo "*** rpm --erase --nodeps gtk gtk-devel" ], - [ echo "*** The test program failed to compile or link. See the file config.log for the" - echo "*** exact error that occured. This usually means GLIB was incorrectly installed" - echo "*** or that you have moved GLIB since it was installed. In the latter case, you" - echo "*** may want to edit the glib-config script: $GLIB_CONFIG" ]) - CFLAGS="$ac_save_CFLAGS" - LIBS="$ac_save_LIBS" - fi - fi - GLIB_CFLAGS="" - GLIB_LIBS="" - ifelse([$3], , :, [$3]) - fi - AC_SUBST(GLIB_CFLAGS) - AC_SUBST(GLIB_LIBS) - rm -f conf.glibtest -]) diff --git a/m4/gst-feature.m4 b/m4/gst-feature.m4 deleted file mode 100644 index a0dc39c84..000000000 --- a/m4/gst-feature.m4 +++ /dev/null @@ -1,182 +0,0 @@ -dnl Perform a check for a feature for GStreamer -dnl Richard Boulton <richard-alsa@tartarus.org> -dnl Thomas Vander Stichele <thomas@apestaart.org> added useful stuff -dnl Last modification: 25/06/2001 -dnl GST_CHECK_FEATURE(FEATURE-NAME, FEATURE-DESCRIPTION, -dnl DEPENDENT-PLUGINS, TEST-FOR-FEATURE, -dnl DISABLE-BY-DEFAULT, ACTION-IF-USE, ACTION-IF-NOTUSE) -dnl -dnl This macro adds a command line argument to enable the user to enable -dnl or disable a feature, and if the feature is enabled, performs a supplied -dnl test to check if the feature is available. -dnl -dnl The test should define HAVE_<FEATURE-NAME> to "yes" or "no" depending -dnl on whether the feature is available. -dnl -dnl The macro will set USE_<FEATURE-NAME> to "yes" or "no" depending on -dnl whether the feature is to be used. -dnl Thomas changed this, so that when USE_<FEATURE-NAME> was already set -dnl to no, then it stays that way. -dnl -dnl The macro will call AM_CONDITIONAL(USE_<<FEATURE-NAME>, ...) to allow -dnl the feature to control what is built in Makefile.ams. If you want -dnl additional actions resulting from the test, you can add them with the -dnl ACTION-IF-USE and ACTION-IF-NOTUSE parameters. -dnl -dnl FEATURE-NAME is the name of the feature, and should be in -dnl purely upper case characters. -dnl FEATURE-DESCRIPTION is used to describe the feature in help text for -dnl the command line argument. -dnl DEPENDENT-PLUGINS lists any plugins which depend on this feature. -dnl TEST-FOR-FEATURE is a test which sets HAVE_<FEATURE-NAME> to "yes" -dnl or "no" depending on whether the feature is -dnl available. -dnl DISABLE-BY-DEFAULT if "disabled", the feature is disabled by default, -dnl if any other value, the feature is enabled by default. -dnl ACTION-IF-USE any extra actions to perform if the feature is to be -dnl used. -dnl ACTION-IF-NOTUSE any extra actions to perform if the feature is not to -dnl be used. -dnl -dnl -dnl thomas : -dnl we also added a history. -dnl GST_PLUGINS_YES will contain all plugins to be built -dnl that were checked through GST_CHECK_FEATURE -dnl GST_PLUGINS_NO will contain those that won't be built - -AC_DEFUN(GST_CHECK_FEATURE, -[dnl -builtin(define, [gst_endisable], ifelse($5, [disabled], [enable], [disable]))dnl -dnl if it is set to NO, then don't even consider it for building -NOUSE= -if test "x$USE_[$1]" = "xno"; then - NOUSE="yes" -fi -AC_ARG_ENABLE(translit([$1], A-Z, a-z), - [ ]builtin(format, --%-26s gst_endisable %s, gst_endisable-translit([$1], A-Z, a-z), [$2]ifelse([$3],,,: [$3])), - [ case "${enableval}" in - yes) USE_[$1]=yes;; - no) USE_[$1]=no;; - *) AC_MSG_ERROR(bad value ${enableval} for --enable-translit([$1], A-Z, a-z)) ;; - esac], - [ USE_$1=]ifelse($5, [disabled], [no], [yes])) dnl DEFAULT - -dnl *** set it back to no if it was preset to no -if test "x$NOUSE" = "xyes"; then - USE_[$1]="no" - AC_MSG_WARN(*** $3 pre-configured not to be built) -fi -NOUSE= - -dnl *** If it's enabled - -if test x$USE_[$1] = xyes; then - gst_check_save_LIBS=$LIBS - gst_check_save_LDFLAGS=$LDFLAGS - gst_check_save_CFLAGS=$CFLAGS - gst_check_save_CPPFLAGS=$CPPFLAGS - gst_check_save_CXXFLAGS=$CXXFLAGS - HAVE_[$1]=no - $4 - LIBS=$gst_check_save_LIBS - LDFLAGS=$gst_check_save_LDFLAGS - CFLAGS=$gst_check_save_CFLAGS - CPPFLAGS=$gst_check_save_CPPFLAGS - CXXFLAGS=$gst_check_save_CXXFLAGS - - dnl If it isn't found, unset USE_[$1] - if test x$HAVE_[$1] = xno; then - USE_[$1]=no - fi -fi -dnl *** Warn if it's disabled or not found -if test x$USE_[$1] = xyes; then - ifelse([$6], , :, [$6]) - GST_PLUGINS_YES="$GST_PLUGINS_YES \n\t[$3]" -else - ifelse([$3], , :, [AC_MSG_NOTICE( -These plugins will not be built: [$3] -)]) - GST_PLUGINS_NO="$GST_PLUGINS_NO \n\t[$3]" - ifelse([$7], , :, [$7]) -fi -dnl *** Define the conditional as appropriate -AM_CONDITIONAL(USE_[$1], test x$USE_[$1] = xyes) -]) - -dnl Use a -config program which accepts --cflags and --libs parameters -dnl to set *_CFLAGS and *_LIBS and check existence of a feature. -dnl Richard Boulton <richard-alsa@tartarus.org> -dnl Last modification: 26/06/2001 -dnl GST_CHECK_CONFIGPROG(FEATURE-NAME, CONFIG-PROG-FILENAME, MODULES) -dnl -dnl This check was written for GStreamer: it should be renamed and checked -dnl for portability if you decide to use it elsewhere. -dnl -AC_DEFUN(GST_CHECK_CONFIGPROG, -[ - AC_PATH_PROG([$1]_CONFIG, [$2], no) - if test x$[$1]_CONFIG = xno; then - [$1]_LIBS= - [$1]_CFLAGS= - HAVE_[$1]=no - else - [$1]_LIBS=`[$2] --libs [$3]` - [$1]_CFLAGS=`[$2] --cflags [$3]` - HAVE_[$1]=yes - fi - AC_SUBST([$1]_LIBS) - AC_SUBST([$1]_CFLAGS) -]) - -dnl Use AC_CHECK_LIB and AC_CHECK_HEADER to do both tests at once -dnl sets HAVE_module if we have it -dnl Richard Boulton <richard-alsa@tartarus.org> -dnl Last modification: 26/06/2001 -dnl GST_CHECK_LIBHEADER(FEATURE-NAME, LIB NAME, LIB FUNCTION, EXTRA LD FLAGS, -dnl HEADER NAME, ACTION-IF-FOUND, ACTION-IF-NOT-FOUND) -dnl -dnl This check was written for GStreamer: it should be renamed and checked -dnl for portability if you decide to use it elsewhere. -dnl -AC_DEFUN(GST_CHECK_LIBHEADER, -[ - AC_CHECK_LIB([$2], [$3], HAVE_[$1]=yes, HAVE_[$1]=no,[$4]) - if test "x$HAVE_[$1]" = "xyes"; then - AC_CHECK_HEADER([$5], :, HAVE_[$1]=no) - if test "x$HAVE_[$1]" = "xyes"; then - dnl execute what needs to be - ifelse([$6], , :, [$6]) - else - ifelse([$7], , :, [$7]) - fi - else - AC_MSG_WARN([$1] not found) - fi - AC_SUBST(HAVE_[$1]) -] -) - -dnl -dnl Add a subsystem --disable flag and all the necessary symbols and substitions -dnl -dnl GST_SUBSYSTEM_DISABLE(SYSNAME, [subsystem name]) -dnl -AC_DEFUN(GST_SUBSYSTEM_DISABLE, -[AC_ARG_ENABLE(translit([$1], A-Z, a-z), -[ ]builtin(format, --disable-%-17s disable %s, translit([$1], A-Z, a-z), $2), -[ case "${enableval}" in - yes) GST_DISABLE_[$1]=no ;; - no) GST_DISABLE_[$1]=yes ;; - *) AC_MSG_ERROR(bad value ${enableval} for --enable-translit([$1], A-Z, a-z)) ;; - esac], -[GST_DISABLE_[$1]=no]) dnl Default value -if test x$GST_DISABLE_[$1] = xyes; then - AC_DEFINE(GST_DISABLE_[$1], 1, [Disable $2]) - GST_DISABLE_[$1]_DEFINE=-DGST_DISABLE_[$1] -fi -AM_CONDITIONAL(GST_DISABLE_[$1], test x$GST_DISABLE_[$1] = xyes) -AC_SUBST(GST_DISABLE_[$1]_DEFINE) -GST_SUBSYSTEM_DISABLE_DEFINES="$GST_SUBSYTEM_DISABLE_DEFINES $GST_DISABLE_[$1]_DEFINE" -]) diff --git a/m4/gtk.m4 b/m4/gtk.m4 deleted file mode 100644 index b8cf4024a..000000000 --- a/m4/gtk.m4 +++ /dev/null @@ -1,194 +0,0 @@ -# Configure paths for GTK+ -# Owen Taylor 97-11-3 - -dnl AM_PATH_GTK([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]]) -dnl Test for GTK, and define GTK_CFLAGS and GTK_LIBS -dnl -AC_DEFUN(AM_PATH_GTK, -[dnl -dnl Get the cflags and libraries from the gtk-config script -dnl -AC_ARG_WITH(gtk-prefix,[ --with-gtk-prefix=PFX Prefix where GTK is installed (optional)], - gtk_config_prefix="$withval", gtk_config_prefix="") -AC_ARG_WITH(gtk-exec-prefix,[ --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)], - gtk_config_exec_prefix="$withval", gtk_config_exec_prefix="") -AC_ARG_ENABLE(gtktest, [ --disable-gtktest Do not try to compile and run a test GTK program], - , enable_gtktest=yes) - - for module in . $4 - do - case "$module" in - gthread) - gtk_config_args="$gtk_config_args gthread" - ;; - esac - done - - if test x$gtk_config_exec_prefix != x ; then - gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix" - if test x${GTK_CONFIG+set} != xset ; then - GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config - fi - fi - if test x$gtk_config_prefix != x ; then - gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix" - if test x${GTK_CONFIG+set} != xset ; then - GTK_CONFIG=$gtk_config_prefix/bin/gtk-config - fi - fi - - AC_PATH_PROG(GTK_CONFIG, gtk-config, no) - min_gtk_version=ifelse([$1], ,0.99.7,$1) - AC_MSG_CHECKING(for GTK - version >= $min_gtk_version) - no_gtk="" - if test "$GTK_CONFIG" = "no" ; then - no_gtk=yes - else - GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags` - GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs` - gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` - gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` - gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` - if test "x$enable_gtktest" = "xyes" ; then - ac_save_CFLAGS="$CFLAGS" - ac_save_LIBS="$LIBS" - CFLAGS="$CFLAGS $GTK_CFLAGS" - LIBS="$GTK_LIBS $LIBS" -dnl -dnl Now check if the installed GTK is sufficiently new. (Also sanity -dnl checks the results of gtk-config to some extent -dnl - rm -f conf.gtktest - AC_TRY_RUN([ -#include <gtk/gtk.h> -#include <stdio.h> -#include <stdlib.h> - -int -main () -{ - int major, minor, micro; - char *tmp_version; - - system ("touch conf.gtktest"); - - /* HP/UX 9 (%@#!) writes to sscanf strings */ - tmp_version = g_strdup("$min_gtk_version"); - if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { - printf("%s, bad version string\n", "$min_gtk_version"); - exit(1); - } - - if ((gtk_major_version != $gtk_config_major_version) || - (gtk_minor_version != $gtk_config_minor_version) || - (gtk_micro_version != $gtk_config_micro_version)) - { - printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", - $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version, - gtk_major_version, gtk_minor_version, gtk_micro_version); - printf ("*** was found! If gtk-config was correct, then it is best\n"); - printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n"); - printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); - printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); - printf("*** required on your system.\n"); - printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n"); - printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n"); - printf("*** before re-running configure\n"); - } -#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION) - else if ((gtk_major_version != GTK_MAJOR_VERSION) || - (gtk_minor_version != GTK_MINOR_VERSION) || - (gtk_micro_version != GTK_MICRO_VERSION)) - { - printf("*** GTK+ header files (version %d.%d.%d) do not match\n", - GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION); - printf("*** library (version %d.%d.%d)\n", - gtk_major_version, gtk_minor_version, gtk_micro_version); - } -#endif /* defined (GTK_MAJOR_VERSION) ... */ - else - { - if ((gtk_major_version > major) || - ((gtk_major_version == major) && (gtk_minor_version > minor)) || - ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro))) - { - return 0; - } - else - { - printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n", - gtk_major_version, gtk_minor_version, gtk_micro_version); - printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n", - major, minor, micro); - printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n"); - printf("***\n"); - printf("*** If you have already installed a sufficiently new version, this error\n"); - printf("*** probably means that the wrong copy of the gtk-config shell script is\n"); - printf("*** being found. The easiest way to fix this is to remove the old version\n"); - printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n"); - printf("*** correct copy of gtk-config. (In this case, you will have to\n"); - printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); - printf("*** so that the correct libraries are found at run-time))\n"); - } - } - return 1; -} -],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) - CFLAGS="$ac_save_CFLAGS" - LIBS="$ac_save_LIBS" - fi - fi - if test "x$no_gtk" = x ; then - AC_MSG_RESULT(yes) - ifelse([$2], , :, [$2]) - else - AC_MSG_RESULT(no) - if test "$GTK_CONFIG" = "no" ; then - echo "*** The gtk-config script installed by GTK could not be found" - echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in" - echo "*** your path, or set the GTK_CONFIG environment variable to the" - echo "*** full path to gtk-config." - else - if test -f conf.gtktest ; then - : - else - echo "*** Could not run GTK test program, checking why..." - CFLAGS="$CFLAGS $GTK_CFLAGS" - LIBS="$LIBS $GTK_LIBS" - AC_TRY_LINK([ -#include <gtk/gtk.h> -#include <stdio.h> -], [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ], - [ echo "*** The test program compiled, but did not run. This usually means" - echo "*** that the run-time linker is not finding GTK or finding the wrong" - echo "*** version of GTK. If it is not finding GTK, you'll need to set your" - echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" - echo "*** to the installed location Also, make sure you have run ldconfig if that" - echo "*** is required on your system" - echo "***" - echo "*** If you have an old version installed, it is best to remove it, although" - echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" - echo "***" - echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that" - echo "*** came with the system with the command" - echo "***" - echo "*** rpm --erase --nodeps gtk gtk-devel" ], - [ echo "*** The test program failed to compile or link. See the file config.log for the" - echo "*** exact error that occured. This usually means GTK was incorrectly installed" - echo "*** or that you have moved GTK since it was installed. In the latter case, you" - echo "*** may want to edit the gtk-config script: $GTK_CONFIG" ]) - CFLAGS="$ac_save_CFLAGS" - LIBS="$ac_save_LIBS" - fi - fi - GTK_CFLAGS="" - GTK_LIBS="" - ifelse([$3], , :, [$3]) - fi - AC_SUBST(GTK_CFLAGS) - AC_SUBST(GTK_LIBS) - rm -f conf.gtktest -]) diff --git a/m4/pkg.m4 b/m4/pkg.m4 deleted file mode 100644 index 874a120cf..000000000 --- a/m4/pkg.m4 +++ /dev/null @@ -1,56 +0,0 @@ - -dnl PKG_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4, action-if, action-not) -dnl defines GSTUFF_LIBS, GSTUFF_CFLAGS, see pkg-config man page -dnl also defines GSTUFF_PKG_ERRORS on error -AC_DEFUN(PKG_CHECK_MODULES, [ - succeeded=no - - if test -z "$PKG_CONFIG"; then - AC_PATH_PROG(PKG_CONFIG, pkg-config, no) - fi - - if test "$PKG_CONFIG" = "no" ; then - echo "*** The pkg-config script could not be found. Make sure it is" - echo "*** in your path, or set the PKG_CONFIG environment variable" - echo "*** to the full path to pkg-config." - echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config." - else - if ! $PKG_CONFIG --atleast-pkgconfig-version 0.7.0; then - echo "*** Your version of pkg-config is too old. You need version 0.7.0 or newer." - echo "*** See http://www.freedesktop.org/software/pkgconfig" - else - AC_MSG_CHECKING(for $2) - - if $PKG_CONFIG --exists "$2" ; then - AC_MSG_RESULT(yes) - succeeded=yes - - AC_MSG_CHECKING($1_CFLAGS) - $1_CFLAGS=`$PKG_CONFIG --cflags "$2"` - AC_MSG_RESULT($$1_CFLAGS) - - AC_MSG_CHECKING($1_LIBS) - $1_LIBS=`$PKG_CONFIG --libs "$2"` - AC_MSG_RESULT($$1_LIBS) - else - $1_CFLAGS="" - $1_LIBS="" - ## If we have a custom action on failure, don't print errors, but - ## do set a variable so people can do so. - $1_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` - ifelse([$4], ,echo $$1_PKG_ERRORS,) - fi - - AC_SUBST($1_CFLAGS) - AC_SUBST($1_LIBS) - fi - fi - - if test $succeeded = yes; then - ifelse([$3], , :, [$3]) - else - ifelse([$4], , AC_MSG_ERROR([Library requirements ($2) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.]), [$4]) - fi -]) - - |