Add m4 dir stuff to dist

Original commit message from CVS:
Add m4 dir stuff to dist
Add glib.m4
Remove m4s we don't need in the core

12 files changed, 201 insertions, 1350 deletions

diff --git a/m4/Makefile.am b/m4/Makefile.am
new file mode 100644
index 000000000..7c718864b
--- /dev/null
+++ b/m4/Makefile.am
@@ -0,0 +1,5 @@
+EXTRA_DIST = \
+	glib.m4 \
+	gst-feature.m4 \
+	gtk.m4 \
+	README
diff --git a/m4/aalib.m4 b/m4/aalib.m4
deleted file mode 100644
index c40b8db86..000000000
--- a/m4/aalib.m4
+++ /dev/null
@@ -1,169 +0,0 @@
-# Configure paths for AALIB
-# Jan Hubicka 4/22/2001
-# stolen from Sam Lantinga 9/21/99
-# stolen from Manish Singh
-# stolen back from Frank Belew
-# stolen from Manish Singh
-# Shamelessly stolen from Owen Taylor
-
-dnl AM_PATH_AALIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
-dnl Test for AALIB, and define AALIB_CFLAGS and AALIB_LIBS
-dnl
-AC_DEFUN(AM_PATH_AALIB,
-[dnl 
-dnl Get the cflags and libraries from the aalib-config script
-dnl
-AC_ARG_WITH(aalib-prefix,[  --with-aalib-prefix=PFX   Prefix where AALIB is installed (optional)],
-            aalib_prefix="$withval", aalib_prefix="")
-AC_ARG_WITH(aalib-exec-prefix,[  --with-aalib-exec-prefix=PFX Exec prefix where AALIB is installed (optional)],
-            aalib_exec_prefix="$withval", aalib_exec_prefix="")
-AC_ARG_ENABLE(aalibtest, [  --disable-aalibtest       Do not try to compile and run a test AALIB program],
-		    , enable_aalibtest=yes)
-
-  if test x$aalib_exec_prefix != x ; then
-     aalib_args="$aalib_args --exec-prefix=$aalib_exec_prefix"
-     if test x${AALIB_CONFIG+set} != xset ; then
-        AALIB_CONFIG=$aalib_exec_prefix/bin/aalib-config
-     fi
-  fi
-  if test x$aalib_prefix != x ; then
-     aalib_args="$aalib_args --prefix=$aalib_prefix"
-     if test x${AALIB_CONFIG+set} != xset ; then
-        AALIB_CONFIG=$aalib_prefix/bin/aalib-config
-     fi
-  fi
-
-  AC_PATH_PROG(AALIB_CONFIG, aalib-config, no)
-  min_aalib_version=ifelse([$1], ,0.11.0,$1)
-  AC_MSG_CHECKING(for AALIB - version >= $min_aalib_version)
-  no_aalib=""
-  if test "$AALIB_CONFIG" = "no" ; then
-    no_aalib=yes
-  else
-    AALIB_CFLAGS=`$AALIB_CONFIG $aalibconf_args --cflags`
-    AALIB_LIBS=`$AALIB_CONFIG $aalibconf_args --libs`
-
-    aalib_major_version=`$AALIB_CONFIG $aalib_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-    aalib_minor_version=`$AALIB_CONFIG $aalib_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-    aalib_micro_version=`$AALIB_CONFIG $aalib_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-    if test "x$enable_aalibtest" = "xyes" ; then
-      ac_save_CFLAGS="$CFLAGS"
-      ac_save_LIBS="$LIBS"
-      CFLAGS="$CFLAGS $AALIB_CFLAGS"
-      LIBS="$LIBS $AALIB_LIBS"
-dnl
-dnl Now check if the installed AALIB is sufficiently new. (Also sanity
-dnl checks the results of aalib-config to some extent
-dnl
-      rm -f conf.aalibtest
-      AC_TRY_RUN([
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "aalib.h"
-
-char*
-my_strdup (char *str)
-{
-  char *new_str;
-  
-  if (str)
-    {
-      new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
-      strcpy (new_str, str);
-    }
-  else
-    new_str = NULL;
-  
-  return new_str;
-}
-
-int main (int argc, char *argv[])
-{
-  int major, minor, micro;
-  char *tmp_version;
-
-  /* This hangs on some systems (?)
-  system ("touch conf.aalibtest");
-  */
-  { FILE *fp = fopen("conf.aalibtest", "a"); if ( fp ) fclose(fp); }
-
-  /* HP/UX 9 (%@#!) writes to sscanf strings */
-  tmp_version = my_strdup("$min_aalib_version");
-  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
-     printf("%s, bad version string\n", "$min_aalib_version");
-     exit(1);
-   }
-
-   if (($aalib_major_version > major) ||
-      (($aalib_major_version == major) && ($aalib_minor_version > minor)) ||
-      (($aalib_major_version == major) && ($aalib_minor_version == minor) && ($aalib_micro_version >= micro)))
-    {
-      return 0;
-    }
-  else
-    {
-      printf("\n*** 'aalib-config --version' returned %d.%d.%d, but the minimum version\n", $aalib_major_version, $aalib_minor_version, $aalib_micro_version);
-      printf("*** of AALIB required is %d.%d.%d. If aalib-config is correct, then it is\n", major, minor, micro);
-      printf("*** best to upgrade to the required version.\n");
-      printf("*** If aalib-config was wrong, set the environment variable AALIB_CONFIG\n");
-      printf("*** to point to the correct copy of aalib-config, and remove the file\n");
-      printf("*** config.cache before re-running configure\n");
-      return 1;
-    }
-}
-
-],, no_aalib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
-       CFLAGS="$ac_save_CFLAGS"
-       LIBS="$ac_save_LIBS"
-     fi
-  fi
-  if test "x$no_aalib" = x ; then
-     AC_MSG_RESULT(yes)
-     ifelse([$2], , :, [$2])     
-  else
-     AC_MSG_RESULT(no)
-     if test "$AALIB_CONFIG" = "no" ; then
-       echo "*** The aalib-config script installed by AALIB could not be found"
-       echo "*** If AALIB was installed in PREFIX, make sure PREFIX/bin is in"
-       echo "*** your path, or set the AALIB_CONFIG environment variable to the"
-       echo "*** full path to aalib-config."
-     else
-       if test -f conf.aalibtest ; then
-        :
-       else
-          echo "*** Could not run AALIB test program, checking why..."
-          CFLAGS="$CFLAGS $AALIB_CFLAGS"
-          LIBS="$LIBS $AALIB_LIBS"
-          AC_TRY_LINK([
-#include <stdio.h>
-#include "AALIB.h"
-],      [ return 0; ],
-        [ echo "*** The test program compiled, but did not run. This usually means"
-          echo "*** that the run-time linker is not finding AALIB or finding the wrong"
-          echo "*** version of AALIB. If it is not finding AALIB, you'll need to set your"
-          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
-          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
-          echo "*** is required on your system"
-	  echo "***"
-          echo "*** If you have an old version installed, it is best to remove it, although"
-          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
-        [ echo "*** The test program failed to compile or link. See the file config.log for the"
-          echo "*** exact error that occured. This usually means AALIB was incorrectly installed"
-          echo "*** or that you have moved AALIB since it was installed. In the latter case, you"
-          echo "*** may want to edit the aalib-config script: $AALIB_CONFIG" ])
-          CFLAGS="$ac_save_CFLAGS"
-          LIBS="$ac_save_LIBS"
-       fi
-     fi
-     AALIB_CFLAGS=""
-     AALIB_LIBS=""
-     ifelse([$3], , :, [$3])
-  fi
-  AC_SUBST(AALIB_CFLAGS)
-  AC_SUBST(AALIB_LIBS)
-  rm -f conf.aalibtest
-])
diff --git a/m4/as-arts.m4 b/m4/as-arts.m4
deleted file mode 100644
index 2d628199e..000000000
--- a/m4/as-arts.m4
+++ /dev/null
@@ -1,194 +0,0 @@
-# This is an example arts .m4 adapted and scrubbed by thomasvs
-
-# Configure paths for ARTS
-# Philip Stadermann   2001-06-21
-# stolen from esd.m4
-
-dnl AM_PATH_ARTS([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
-dnl Test for ARTS, and define ARTS_CXXFLAGS and ARTS_LIBS
-dnl
-AC_DEFUN([AM_PATH_ARTS],
-[dnl 
-dnl Get the cflags and libraries from the artsc-config script
-dnl
-AC_ARG_WITH(arts-prefix,[  --with-arts-prefix=PFX  Prefix where ARTS is installed (optional)],
-            arts_prefix="$withval", arts_prefix="")
-AC_ARG_WITH(arts-exec-prefix,[  --with-arts-exec-prefix=PFX                                                                             Exec prefix where ARTS is installed (optional)],
-            arts_exec_prefix="$withval", arts_exec_prefix="")
-AC_ARG_ENABLE(artstest, [  --disable-artstest      Do not try to compile and run a test ARTS program],
-		    , enable_artstest=yes)
-
-  if test x$arts_exec_prefix != x ; then
-    arts_args="$arts_args --exec-prefix=$arts_exec_prefix"
-    if test x${ARTS_CONFIG+set} != xset ; then
-      ARTS_CONFIG=$arts_exec_prefix/bin/artsc-config
-    fi
-  fi
-  if test x$arts_prefix != x ; then
-    arts_args="$arts_args --prefix=$arts_prefix"
-    if test x${ARTS_CONFIG+set} != xset ; then
-      ARTS_CONFIG=$arts_prefix/bin/artsc-config
-    fi
-  fi
-
-  AC_PATH_PROG(ARTS_CONFIG, artsc-config, no)
-  min_arts_version=ifelse([$1], ,0.9.5,$1)
-  AC_MSG_CHECKING(for ARTS artsc - version >= $min_arts_version)
-  no_arts=""
-  if test "$ARTS_CONFIG" = "no" ; then
-    no_arts=yes
-  else
-    # FIXME : thomas added this sed to get arts path instead of artsc
-    ARTS_CXXFLAGS=`$ARTS_CONFIG $artsconf_args --cflags | sed 's/artsc$/arts/'`
-    ARTS_LIBS=`$ARTS_CONFIG $artsconf_args --libs | sed 's/artsc$/arts/'`
-
-    arts_major_version=`$ARTS_CONFIG $arts_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-    arts_minor_version=`$ARTS_CONFIG $arts_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-    arts_micro_version=`$ARTS_CONFIG $arts_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-    if test "x$enable_artstest" = "xyes" ; then
-      dnl ac_save_CXXFLAGS="$CXXFLAGS"
-      dnl ac_save_LIBS="$LIBS"
-      dnl CFLAGS="$CFLAGS $ARTS_CXXFLAGS"
-      dnl LIBS="$LIBS $ARTS_LIBS"
-dnl
-dnl Now check if the installed ARTS is sufficiently new. (Also sanity
-dnl checks the results of artsc-config to some extent)
-dnl
-
-dnl a*s: to successfully compile the C++ test app, we need to 
-dnl first make sure we're going to compile it as C++ (with AC_LANG_PUSH),
-dnl then add the CFLAGS and CLIBS of arts which we just discovered to the
-dnl C++ compilation and linking flags.
-dnl We also need to clean up after the test; this means using AC_LANG_POP
-dnl and restoring the CPPFLAGS and LDFLAGS from the saved values we take 
-dnl here.
-
-dnl ask nicely for C++ compilation
-      AC_LANG_PUSH(C++)
-
-dnl save compilation and link flags and make our own
-      ac_save_CPPFLAGS="$CPPFLAGS"
-      ac_save_LDFLAGS="$LDFLAGS"
-      AC_SUBST(CPPFLAGS,"$CPPFLAGS $ARTS_CXXFLAGS")
-      AC_SUBST(LDFLAGS,"$LDFLAGS $ARTS_CLIBS")
- 
-      rm -f conf.artstest
-      AC_TRY_RUN([
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <artsflow.h>
-
-char*
-my_strdup (char *str)
-{
-  char *new_str;
-  
-  if (str)
-    {
-      // thomas: the original test did not have the typecast
-      new_str = (char *) malloc ((strlen (str) + 1) * sizeof(char));
-      strcpy (new_str, str);
-    }
-  else
-    new_str = NULL;
-  
-  return new_str;
-}
-
-int main ()
-{
-  int major, minor, micro;
-  char *tmp_version;
-
-  system ("touch conf.artstest");
-
-  /* HP/UX 9 (%@#!) writes to sscanf strings */
-  tmp_version = my_strdup("$min_arts_version");
-  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
-     printf("%s, bad version string\n", "$min_arts_version");
-     exit(1);
-   }
-
-   if (($arts_major_version > major) ||
-      (($arts_major_version == major) && ($arts_minor_version > minor)) ||
-      (($arts_major_version == major) && ($arts_minor_version == minor) && ($arts_micro_version >= micro)))
-    {
-      return 0;
-    }
-  else
-    {
-      printf("\n*** 'artsc-config --version' returned %d.%d.%d, but the minimum version\n", $arts_major_version, $arts_minor_version, $arts_micro_version);
-      printf("*** of ARTS required is %d.%d.%d. If artsc-config is correct, then it is\n", major, minor, micro);
-      printf("*** best to upgrade to the required version.\n");
-      printf("*** If artsc-config was wrong, set the environment variable ARTS_CONFIG\n");
-      printf("*** to point to the correct copy of artsc-config, and remove the file\n");
-      printf("*** config.cache before re-running configure\n");
-      return 1;
-    }
-}
-
-],, no_arts=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
-      dnl CFLAGS="$ac_save_CFLAGS"
-      dnl LIBS="$ac_save_LIBS"
-      dnl a*s this is were we clean up after the test
-      AC_LANG_POP(C++)
-      CXXFLAGS="$ac_save_CXXFLAGS"
-      LDFLAGS="$ac_save_LDFLAGS"
-      dnl a*s we are sure that these are right, so we make them active
-      AC_SUBST(CXXFLAGS,"$CXXFLAGS")
-      AC_SUBST(LDFLAGS,"$LDFLAGS")
-    fi
-  fi
-  if test "x$no_arts" = x ; then
-    AC_MSG_RESULT(yes)
-    ifelse([$2], , :, [$2])     
-  else
-    AC_MSG_RESULT(no)
-    if test "$ARTS_CONFIG" = "no" ; then
-      echo "*** The artsc-config script installed by ARTS could not be found"
-      echo "*** If ARTS was installed in PREFIX, make sure PREFIX/bin is in"
-      echo "*** your path, or set the ARTS_CONFIG environment variable to the"
-      echo "*** full path to artsc-config."
-    else
-      if test -f conf.artstest ; then
-        :
-      else
-         echo "*** Could not run ARTS test program, checking why..."
-         CFLAGS="$CFLAGS $ARTS_CXXFLAGS"
-         LIBS="$LIBS $ARTS_LIBS"
-         AC_TRY_LINK([
-#include <stdio.h>
-#include <artsflow.h>
-],      [ return 0; ],
-        [ echo "*** The test program compiled, but did not run. This usually means"
-          echo "*** that the run-time linker is not finding ARTS or finding the wrong"
-          echo "*** version of ARTS. If it is not finding ARTS, you'll need to set your"
-          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
-          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
-          echo "*** is required on your system"
-	  echo "***"
-          echo "*** If you have an old version installed, it is best to remove it, although"
-          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
-        [ echo "*** The test program failed to compile or link. See the file config.log for the"
-          echo "*** exact error that occured. This usually means ARTS was incorrectly installed"
-          echo "*** or that you have moved ARTS since it was installed. In the latter case, you"
-          echo "*** may want to edit the artsc-config script: $ARTS_CONFIG" ])
-          CFLAGS="$ac_save_CFLAGS"
-          LIBS="$ac_save_LIBS"
-      fi
-    fi
-    ARTS_CXXFLAGS=""
-    ARTS_LIBS=""
-    ifelse([$3], , :, [$3])
-  fi
-  AC_SUBST(ARTS_CXXFLAGS)
-  AC_SUBST(ARTS_LIBS)
-  rm -f conf.artstest
-])
-
-dnl release C++ question
-
diff --git a/m4/as-liblame.m4 b/m4/as-liblame.m4
deleted file mode 100644
index 40722a290..000000000
--- a/m4/as-liblame.m4
+++ /dev/null
@@ -1,50 +0,0 @@
-# CFLAGS and library paths for LIBLAME
-# taken from Autostar Sandbox, http://autostars.sourceforge.net/
-# inspired by xmms.m4
-
-dnl Usage:
-dnl AM_PATH_LIBLAME([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
-dnl FIXME: version checking does not work currently
-dnl
-dnl Example:
-dnl AM_PATH_LIBLAME(3.89, , AC_MSG_ERROR([*** LIBLAME >= 3.89 not installed)) 
-dnl
-dnl Defines LIBLAME_LIBS
-dnl FIXME: should define LIBLAME_VERSION
-dnl
-
-AC_DEFUN(AM_PATH_LIBLAME,
-[
-  dnl check for the library
-  AC_CHECK_LIB(mp3lame, lame_init, HAVE_LIBLAME=yes, HAVE_LIBLAME=no, -lm)
-  dnl check if lame.h is available in the standard location or not
-  HAVE_LAME_H_STD=no
-  AC_CHECK_HEADER(lame.h, HAVE_LAME_H_STD=no, :)
-  AC_CHECK_HEADER(lame/lame.h, HAVE_LAME_H_STD=yes, :)
-  AC_MSG_CHECKING(for lame.h in right location)
-  if test "x$HAVE_LAME_H_STD" = "xyes"; then
-    AC_MSG_RESULT(yes)
-  else
-    AC_MSG_RESULT(no)
-    HAVE_LIBLAME=no
-    if test "x$HAVE_LAME_H_STD"="xno"; then
-      AC_MSG_WARN(lame.h found in include dir,)
-      AC_MSG_WARN( while it should be in it's own lame/ dir !)
-    fi
- fi
-
-  dnl now do the actual "do we have it ?" test
-  if test "x$HAVE_LIBLAME" = "xyes"; then
-    LIBLAME_LIBS="-lmp3lame -lm"
-    dnl execute what we have to because it's found
-    ifelse([$2], , :, [$2])
-  else
-    LIBLAME_LIBS=""
-    dnl execute what we have to because it's not found
-    ifelse([$3], , :, [$3])
-  fi
-
-  dnl make variables available
-  AC_SUBST(LIBLAME_LIBS)
-  AC_SUBST(HAVE_LIBLAME)
-])
diff --git a/m4/glib.m4 b/m4/glib.m4
new file mode 100644
index 000000000..b8094bbfe
--- /dev/null
+++ b/m4/glib.m4
@@ -0,0 +1,196 @@
+# Configure paths for GLIB
+# Owen Taylor     97-11-3
+
+dnl AM_PATH_GLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
+dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or 
+dnl gthread is specified in MODULES, pass to glib-config
+dnl
+AC_DEFUN(AM_PATH_GLIB,
+[dnl 
+dnl Get the cflags and libraries from the glib-config script
+dnl
+AC_ARG_WITH(glib-prefix,[  --with-glib-prefix=PFX   Prefix where GLIB is installed (optional)],
+            glib_config_prefix="$withval", glib_config_prefix="")
+AC_ARG_WITH(glib-exec-prefix,[  --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)],
+            glib_config_exec_prefix="$withval", glib_config_exec_prefix="")
+AC_ARG_ENABLE(glibtest, [  --disable-glibtest       Do not try to compile and run a test GLIB program],
+		    , enable_glibtest=yes)
+
+  if test x$glib_config_exec_prefix != x ; then
+     glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix"
+     if test x${GLIB_CONFIG+set} != xset ; then
+        GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config
+     fi
+  fi
+  if test x$glib_config_prefix != x ; then
+     glib_config_args="$glib_config_args --prefix=$glib_config_prefix"
+     if test x${GLIB_CONFIG+set} != xset ; then
+        GLIB_CONFIG=$glib_config_prefix/bin/glib-config
+     fi
+  fi
+
+  for module in . $4
+  do
+      case "$module" in
+         gmodule) 
+             glib_config_args="$glib_config_args gmodule"
+         ;;
+         gthread) 
+             glib_config_args="$glib_config_args gthread"
+         ;;
+      esac
+  done
+
+  AC_PATH_PROG(GLIB_CONFIG, glib-config, no)
+  min_glib_version=ifelse([$1], ,0.99.7,$1)
+  AC_MSG_CHECKING(for GLIB - version >= $min_glib_version)
+  no_glib=""
+  if test "$GLIB_CONFIG" = "no" ; then
+    no_glib=yes
+  else
+    GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags`
+    GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs`
+    glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+    glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+    glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+    if test "x$enable_glibtest" = "xyes" ; then
+      ac_save_CFLAGS="$CFLAGS"
+      ac_save_LIBS="$LIBS"
+      CFLAGS="$CFLAGS $GLIB_CFLAGS"
+      LIBS="$GLIB_LIBS $LIBS"
+dnl
+dnl Now check if the installed GLIB is sufficiently new. (Also sanity
+dnl checks the results of glib-config to some extent
+dnl
+      rm -f conf.glibtest
+      AC_TRY_RUN([
+#include <glib.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+int 
+main ()
+{
+  int major, minor, micro;
+  char *tmp_version;
+
+  system ("touch conf.glibtest");
+
+  /* HP/UX 9 (%@#!) writes to sscanf strings */
+  tmp_version = g_strdup("$min_glib_version");
+  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
+     printf("%s, bad version string\n", "$min_glib_version");
+     exit(1);
+   }
+
+  if ((glib_major_version != $glib_config_major_version) ||
+      (glib_minor_version != $glib_config_minor_version) ||
+      (glib_micro_version != $glib_config_micro_version))
+    {
+      printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", 
+             $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
+             glib_major_version, glib_minor_version, glib_micro_version);
+      printf ("*** was found! If glib-config was correct, then it is best\n");
+      printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n");
+      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
+      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
+      printf("*** required on your system.\n");
+      printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n");
+      printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n");
+      printf("*** before re-running configure\n");
+    } 
+  else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
+	   (glib_minor_version != GLIB_MINOR_VERSION) ||
+           (glib_micro_version != GLIB_MICRO_VERSION))
+    {
+      printf("*** GLIB header files (version %d.%d.%d) do not match\n",
+	     GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
+      printf("*** library (version %d.%d.%d)\n",
+	     glib_major_version, glib_minor_version, glib_micro_version);
+    }
+  else
+    {
+      if ((glib_major_version > major) ||
+        ((glib_major_version == major) && (glib_minor_version > minor)) ||
+        ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
+      {
+        return 0;
+       }
+     else
+      {
+        printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
+               glib_major_version, glib_minor_version, glib_micro_version);
+        printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
+	       major, minor, micro);
+        printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
+        printf("***\n");
+        printf("*** If you have already installed a sufficiently new version, this error\n");
+        printf("*** probably means that the wrong copy of the glib-config shell script is\n");
+        printf("*** being found. The easiest way to fix this is to remove the old version\n");
+        printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n");
+        printf("*** correct copy of glib-config. (In this case, you will have to\n");
+        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
+        printf("*** so that the correct libraries are found at run-time))\n");
+      }
+    }
+  return 1;
+}
+],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+     fi
+  fi
+  if test "x$no_glib" = x ; then
+     AC_MSG_RESULT(yes)
+     ifelse([$2], , :, [$2])     
+  else
+     AC_MSG_RESULT(no)
+     if test "$GLIB_CONFIG" = "no" ; then
+       echo "*** The glib-config script installed by GLIB could not be found"
+       echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in"
+       echo "*** your path, or set the GLIB_CONFIG environment variable to the"
+       echo "*** full path to glib-config."
+     else
+       if test -f conf.glibtest ; then
+        :
+       else
+          echo "*** Could not run GLIB test program, checking why..."
+          CFLAGS="$CFLAGS $GLIB_CFLAGS"
+          LIBS="$LIBS $GLIB_LIBS"
+          AC_TRY_LINK([
+#include <glib.h>
+#include <stdio.h>
+],      [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
+        [ echo "*** The test program compiled, but did not run. This usually means"
+          echo "*** that the run-time linker is not finding GLIB or finding the wrong"
+          echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
+          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
+          echo "*** is required on your system"
+	  echo "***"
+          echo "*** If you have an old version installed, it is best to remove it, although"
+          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
+          echo "***"
+          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
+          echo "*** came with the system with the command"
+          echo "***"
+          echo "***    rpm --erase --nodeps gtk gtk-devel" ],
+        [ echo "*** The test program failed to compile or link. See the file config.log for the"
+          echo "*** exact error that occured. This usually means GLIB was incorrectly installed"
+          echo "*** or that you have moved GLIB since it was installed. In the latter case, you"
+          echo "*** may want to edit the glib-config script: $GLIB_CONFIG" ])
+          CFLAGS="$ac_save_CFLAGS"
+          LIBS="$ac_save_LIBS"
+       fi
+     fi
+     GLIB_CFLAGS=""
+     GLIB_LIBS=""
+     ifelse([$3], , :, [$3])
+  fi
+  AC_SUBST(GLIB_CFLAGS)
+  AC_SUBST(GLIB_LIBS)
+  rm -f conf.glibtest
+])
diff --git a/m4/gst-alsa.m4 b/m4/gst-alsa.m4
deleted file mode 100644
index 0ca35ef34..000000000
--- a/m4/gst-alsa.m4
+++ /dev/null
@@ -1,144 +0,0 @@
-dnl Configure Paths for Alsa
-dnl Some modifications by Richard Boulton <richard-alsa@tartarus.org>
-dnl Christopher Lansdown <lansdoct@cs.alfred.edu>
-dnl Jaroslav Kysela <perex@suse.cz>
-dnl Last modification: 07/01/2001
-dnl AM_PATH_ALSA([MINIMUM-VERSION [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
-dnl Test for libasound, and define ALSA_CFLAGS and ALSA_LIBS as appropriate.
-dnl enables arguments --with-alsa-prefix=
-dnl                   --with-alsa-enc-prefix=
-dnl                   --disable-alsatest  (this has no effect, as yet)
-dnl
-dnl For backwards compatibility, if ACTION_IF_NOT_FOUND is not specified,
-dnl and the alsa libraries are not found, a fatal AC_MSG_ERROR() will result.
-dnl
-AC_DEFUN(AM_PATH_ALSA,
-[dnl Save the original CFLAGS, LDFLAGS, and LIBS
-alsa_save_CFLAGS="$CFLAGS"
-alsa_save_LDFLAGS="$LDFLAGS"
-alsa_save_LIBS="$LIBS"
-alsa_found=yes
-
-dnl
-dnl Get the cflags and libraries for alsa
-dnl
-AC_ARG_WITH(alsa-prefix,
-[  --with-alsa-prefix=PFX  Prefix where Alsa library is installed(optional)],
-[alsa_prefix="$withval"], [alsa_prefix=""])
-
-AC_ARG_WITH(alsa-inc-prefix,
-[  --with-alsa-inc-prefix=PFX  Prefix where include libraries are (optional)],
-[alsa_inc_prefix="$withval"], [alsa_inc_prefix=""])
-
-dnl FIXME: this is not yet implemented
-AC_ARG_ENABLE(alsatest,
-[  --disable-alsatest      Do not try to compile and run a test Alsa program],
-[enable_alsatest=no],
-[enable_alsatest=yes])
-
-dnl Add any special include directories
-AC_MSG_CHECKING(for ALSA CFLAGS)
-if test "$alsa_inc_prefix" != "" ; then
-	ALSA_CFLAGS="$ALSA_CFLAGS -I$alsa_inc_prefix"
-	CFLAGS="$CFLAGS -I$alsa_inc_prefix"
-fi
-AC_MSG_RESULT($ALSA_CFLAGS)
-
-dnl add any special lib dirs
-AC_MSG_CHECKING(for ALSA LDFLAGS)
-if test "$alsa_prefix" != "" ; then
-	ALSA_LIBS="$ALSA_LIBS -L$alsa_prefix"
-	LDFLAGS="$LDFLAGS $ALSA_LIBS"
-fi
-
-dnl add the alsa library
-ALSA_LIBS="$ALSA_LIBS -lasound -lm -ldl"
-LIBS=`echo $LIBS | sed 's/-lm//'`
-LIBS=`echo $LIBS | sed 's/-ldl//'`
-LIBS=`echo $LIBS | sed 's/  //'`
-LIBS="$ALSA_LIBS $LIBS"
-AC_MSG_RESULT($ALSA_LIBS)
-
-dnl Check for a working version of libasound that is of the right version.
-min_alsa_version=ifelse([$1], ,0.1.1,$1)
-AC_MSG_CHECKING(for libasound headers version >= $min_alsa_version)
-no_alsa=""
-    alsa_min_major_version=`echo $min_alsa_version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-    alsa_min_minor_version=`echo $min_alsa_version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-    alsa_min_micro_version=`echo $min_alsa_version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-
-AC_LANG_SAVE
-AC_LANG_C
-AC_TRY_COMPILE([
-#include <sys/asoundlib.h>
-], [
-void main(void)
-{
-/* ensure backward compatibility */
-#if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
-#define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
-#endif
-#if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
-#define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
-#endif
-#if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
-#define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
-#endif
-
-#  if(SND_LIB_MAJOR > $alsa_min_major_version)
-  exit(0);
-#  else
-#    if(SND_LIB_MAJOR < $alsa_min_major_version)
-#       error not present
-#    endif
-
-#   if(SND_LIB_MINOR > $alsa_min_minor_version)
-  exit(0);
-#   else
-#     if(SND_LIB_MINOR < $alsa_min_minor_version)
-#          error not present
-#      endif
-
-#      if(SND_LIB_SUBMINOR < $alsa_min_micro_version)
-#        error not present
-#      endif
-#    endif
-#  endif
-exit(0);
-}
-],
-  [AC_MSG_RESULT(found.)],
-  [AC_MSG_RESULT(not present.)
-   ifelse([$3], , [AC_MSG_ERROR(Sufficiently new version of libasound not found.)])
-   alsa_found=no]
-)
-AC_LANG_RESTORE
-
-dnl Now that we know that we have the right version, let's see if we have the library and not just the headers.
-AC_CHECK_LIB([asound], [snd_seq_create_event],,
-	[ifelse([$3], , [AC_MSG_ERROR(No linkable libasound was found.)])
-	 alsa_found=no]
-)
-
-if test "x$alsa_found" = "xyes" ; then
-   ifelse([$2], , :, [$2])
-   LIBS=`echo $LIBS | sed 's/-lasound//g'`
-   LIBS=`echo $LIBS | sed 's/  //'`
-   LIBS="-lasound $LIBS"
-fi
-if test "x$alsa_found" = "xno" ; then
-   ifelse([$3], , :, [$3])
-   CFLAGS="$alsa_save_CFLAGS"
-   LDFLAGS="$alsa_save_LDFLAGS"
-   LIBS="$alsa_save_LIBS"
-   ALSA_CFLAGS=""
-   ALSA_LIBS=""
-fi
-
-dnl That should be it.  Now just export out symbols:
-AC_SUBST(ALSA_CFLAGS)
-AC_SUBST(ALSA_LIBS)
-])
diff --git a/m4/gst-artsc.m4 b/m4/gst-artsc.m4
deleted file mode 100644
index 723041b82..000000000
--- a/m4/gst-artsc.m4
+++ /dev/null
@@ -1,29 +0,0 @@
-dnl Perform a check for existence of ARTSC
-dnl Richard Boulton <richard-alsa@tartarus.org>
-dnl Last modification: 26/06/2001
-dnl GST_CHECK_FEATURE(FEATURE-NAME, FEATURE-DESCRIPTION,
-dnl                   DEPENDENT-PLUGINS, TEST-FOR-FEATURE)
-dnl
-dnl This check was written for GStreamer: it should be renamed and checked
-dnl for portability if you decide to use it elsewhere.
-dnl
-AC_DEFUN(GST_CHECK_ARTSC,
-[ 
-  AC_PATH_PROG(ARTSC_CONFIG, artsc-config, no)
-  if test "x$ARTSC_CONFIG" = "xno"; then
-    AC_MSG_WARN([Couldn't find artsc-config])
-    HAVE_ARTSC=no
-    ARTSC_LIBS=
-    ARTSC_CFLAGS=
-  else
-    ARTSC_LIBS=`artsc-config --libs`
-    ARTSC_CFLAGS=`artsc-config --cflags`
-    dnl AC_CHECK_HEADER uses CPPFLAGS, but not CFLAGS.  
-    dnl FIXME: Ensure only suitable flags result from artsc-config --cflags
-    CPPFLAGS="$CPPFLAGS $ARTSC_CFLAGS"
-    AC_CHECK_HEADER(artsc.h, HAVE_ARTSC=yes, HAVE_ARTSC=no)
-  fi
-  AC_SUBST(ARTSC_LIBS)
-  AC_SUBST(ARTSC_CFLAGS) 
-])
-
diff --git a/m4/gst-sdl.m4 b/m4/gst-sdl.m4
deleted file mode 100644
index a62b33c2e..000000000
--- a/m4/gst-sdl.m4
+++ /dev/null
@@ -1,176 +0,0 @@
-# stuff for SDL, hope this helps if we put it here
-
-# Configure paths for SDL
-# Sam Lantinga 9/21/99
-# stolen from Manish Singh
-# stolen back from Frank Belew
-# stolen from Manish Singh
-# Shamelessly stolen from Owen Taylor
-
-dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
-dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS
-dnl
-AC_DEFUN(AM_PATH_SDL,
-[dnl 
-dnl Get the cflags and libraries from the sdl-config script
-dnl
-AC_ARG_WITH(sdl-prefix,[  --with-sdl-prefix=PFX   Prefix where SDL is installed (optional)],
-            sdl_prefix="$withval", sdl_prefix="")
-AC_ARG_WITH(sdl-exec-prefix,[  --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)],
-            sdl_exec_prefix="$withval", sdl_exec_prefix="")
-AC_ARG_ENABLE(sdltest, [  --disable-sdltest       Do not try to compile and run a test SDL program],
-		    , enable_sdltest=yes)
-
-  if test x$sdl_exec_prefix != x ; then
-     sdl_args="$sdl_args --exec-prefix=$sdl_exec_prefix"
-     if test x${SDL_CONFIG+set} != xset ; then
-        SDL_CONFIG=$sdl_exec_prefix/bin/sdl-config
-     fi
-  fi
-  if test x$sdl_prefix != x ; then
-     sdl_args="$sdl_args --prefix=$sdl_prefix"
-     if test x${SDL_CONFIG+set} != xset ; then
-        SDL_CONFIG=$sdl_prefix/bin/sdl-config
-     fi
-  fi
-
-  AC_PATH_PROG(SDL_CONFIG, sdl-config, no)
-  min_sdl_version=ifelse([$1], ,0.11.0,$1)
-  AC_MSG_CHECKING(for SDL - version >= $min_sdl_version)
-  no_sdl=""
-  if test "$SDL_CONFIG" = "no" ; then
-    no_sdl=yes
-  else
-    SDL_CFLAGS=`$SDL_CONFIG $sdlconf_args --cflags`
-    SDL_LIBS=`$SDL_CONFIG $sdlconf_args --libs`
-
-    sdl_major_version=`$SDL_CONFIG $sdl_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-    sdl_minor_version=`$SDL_CONFIG $sdl_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-    sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-    if test "x$enable_sdltest" = "xyes" ; then
-      ac_save_CFLAGS="$CFLAGS"
-      ac_save_LIBS="$LIBS"
-      CFLAGS="$CFLAGS $SDL_CFLAGS"
-      LIBS="$LIBS $SDL_LIBS"
-dnl
-dnl Now check if the installed SDL is sufficiently new. (Also sanity
-dnl checks the results of sdl-config to some extent
-dnl
-      rm -f conf.sdltest
-      AC_TRY_RUN([
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "SDL.h"
-
-char*
-my_strdup (char *str)
-{
-  char *new_str;
-  
-  if (str)
-    {
-      new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
-      strcpy (new_str, str);
-    }
-  else
-    new_str = NULL;
-  
-  return new_str;
-}
-
-int main (int argc, char *argv[])
-{
-  int major, minor, micro;
-  char *tmp_version;
-
-  /* This hangs on some systems (?)
-  system ("touch conf.sdltest");
-  */
-  { FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); }
-
-  /* HP/UX 9 (%@#!) writes to sscanf strings */
-  tmp_version = my_strdup("$min_sdl_version");
-  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
-     printf("%s, bad version string\n", "$min_sdl_version");
-     exit(1);
-   }
-
-   if (($sdl_major_version > major) ||
-      (($sdl_major_version == major) && ($sdl_minor_version > minor)) ||
-      (($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro)))
-    {
-      return 0;
-    }
-  else
-    {
-      printf("\n*** 'sdl-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version);
-      printf("*** of SDL required is %d.%d.%d. If sdl-config is correct, then it is\n", major, minor, micro);
-      printf("*** best to upgrade to the required version.\n");
-      printf("*** If sdl-config was wrong, set the environment variable SDL_CONFIG\n");
-      printf("*** to point to the correct copy of sdl-config, and remove the file\n");
-      printf("*** config.cache before re-running configure\n");
-      return 1;
-    }
-}
-
-],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
-       CFLAGS="$ac_save_CFLAGS"
-       LIBS="$ac_save_LIBS"
-     fi
-  fi
-  if test "x$no_sdl" = x ; then
-     AC_MSG_RESULT(yes)
-     ifelse([$2], , :, [$2])     
-  else
-     AC_MSG_RESULT(no)
-     if test "$SDL_CONFIG" = "no" ; then
-       echo "*** The sdl-config script installed by SDL could not be found"
-       echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in"
-       echo "*** your path, or set the SDL_CONFIG environment variable to the"
-       echo "*** full path to sdl-config."
-     else
-       if test -f conf.sdltest ; then
-        :
-       else
-          echo "*** Could not run SDL test program, checking why..."
-          CFLAGS="$CFLAGS $SDL_CFLAGS"
-          LIBS="$LIBS $SDL_LIBS"
-          AC_TRY_LINK([
-#include <stdio.h>
-#include "SDL.h"
-
-int main(int argc, char *argv[])
-{ return 0; }
-#undef  main
-#define main K_and_R_C_main
-],      [ return 0; ],
-        [ echo "*** The test program compiled, but did not run. This usually means"
-          echo "*** that the run-time linker is not finding SDL or finding the wrong"
-          echo "*** version of SDL. If it is not finding SDL, you'll need to set your"
-          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
-          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
-          echo "*** is required on your system"
-	  echo "***"
-          echo "*** If you have an old version installed, it is best to remove it, although"
-          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
-        [ echo "*** The test program failed to compile or link. See the file config.log for the"
-          echo "*** exact error that occured. This usually means SDL was incorrectly installed"
-          echo "*** or that you have moved SDL since it was installed. In the latter case, you"
-          echo "*** may want to edit the sdl-config script: $SDL_CONFIG" ])
-          CFLAGS="$ac_save_CFLAGS"
-          LIBS="$ac_save_LIBS"
-       fi
-     fi
-     SDL_CFLAGS=""
-     SDL_LIBS=""
-     ifelse([$3], , :, [$3])
-  fi
-  AC_SUBST(SDL_CFLAGS)
-  AC_SUBST(SDL_LIBS)
-  rm -f conf.sdltest
-])
-
diff --git a/m4/gst-sid.m4 b/m4/gst-sid.m4
deleted file mode 100644
index fa93086c4..000000000
--- a/m4/gst-sid.m4
+++ /dev/null
@@ -1,133 +0,0 @@
-dnl FIXME: the longest macro for one of the small plugins ?
-dnl there must be a way to make this simpler !
-dnl sidplay stuff (taken from xmms)
-AC_DEFUN(AC_FIND_FILE,
-[ 
-  $3=NO
-  for i in $2; do
-    for j in $1; do
-      if test -r "$i/$j"; then
-        $3=$i
-        break 2
-      fi
-    done
-  done
-])
-
-AC_DEFUN(AC_PATH_LIBSIDPLAY,
-[
-AC_MSG_CHECKING([for SIDPLAY includes and library])
-ac_sidplay_cflags=NO
-ac_sidplay_library=NO
-sidplay_cflags=""
-sidplay_library=""
-AC_ARG_WITH(sidplay-includes,
-  [  --with-sidplay-includes=DIR
-                          where the sidplay includes are located],
-  [ac_sidplay_cflags="$withval"
-  ])
-
-AC_ARG_WITH(sidplay-library,
-  [  --with-sidplay-library=DIR
-                          where the sidplay library is installed],
-  [ac_sidplay_library="$withval"
-  ])
-  
-if test "$ac_sidplay_cflags" = NO || test "$ac_sidplay_library" = NO; then
-
-#search common locations
-    
-AC_CACHE_VAL(ac_cv_have_sidplay,
-[
-sidplay_incdirs="$ac_sidplay_cflags /usr/include /usr/local/include /usr/lib/sidplay/include /usr/local/lib/sidplay/include"
-AC_FIND_FILE(sidplay/sidtune.h,$sidplay_incdirs,sidplay_foundincdir)
-sidplay_libdirs="$ac_sidplay_library /usr/lib /usr/local/lib /usr/lib/sidplay /usr/local/lib/sidplay"
-AC_FIND_FILE(libsidplay.so libsidplay.so.1 libsidplay.so.1.36 libsidplay.so.1.37,$sidplay_libdirs,sidplay_foundlibdir)
-ac_sidplay_library=$sidplay_foundlibdir
-
-if test "$ac_sidplay_cflags" = NO || test "$ac_sidplay_library" = NO; then
-  ac_cv_have_sidplay="have_sidplay=no"
-  ac_sidplay_notfound=""
-  if test "$ac_sidplay_cflags" = NO; then
-    if test "$ac_sidplay_library" = NO; then
-      ac_sidplay_notfound="(headers and library)";
-    else
-      ac_sidplay_notfound="(headers)";
-    fi
-  else
-    ac_sidplay_notfound="(library)";
-  fi
-  eval "$ac_cv_have_sidplay"
-  AC_MSG_RESULT([$have_sidplay])
-else
-  have_sidplay=yes
-fi
-      
-])  dnl AC_CACHE_VAL(ac_cv_have_sidplay,
-else  
-  have_sidplay=yes
-fi  dnl if (have_to_search)
-  
-eval "$ac_cv_have_sidplay"
-if test "$have_sidplay" != yes; then
-  AC_MSG_RESULT([$have_sidplay]);
-else  
-  ac_cv_have_sidplay="have_sidplay=yes \
-    ac_sidplay_cflags=$ac_sidplay_cflags 
-ac_sidplay_library=$ac_sidplay_library"
-  AC_MSG_RESULT([library $ac_sidplay_library, headers $ac_sidplay_cflags])
-
-  sidplay_library=$ac_sidplay_library
-  sidplay_cflags=$ac_sidplay_cflags
-  SIDPLAY_LIBS="-L$sidplay_library -lsidplay"
-  all_libraries="$SIDPLAY_LIBS $all_libraries"
-  SIDPLAY_CFLAGS="-I$sidplay_cflags"
-  all_includes="$SIDPLAY_CFLAGS $all_includes"
-fi
-  
-dnl Test compilation.
-  
-AC_MSG_CHECKING([whether -lsidplay works])
-ac_cxxflags_safe=$CXXFLAGS
-ac_ldflags_safe=$LDFLAGS
-ac_libs_safe=$LIBS
-  
-CXXFLAGS="$CXXFLAGS -I$sidplay_cflags"
-LDFLAGS="$LDFLAGS -L$sidplay_library"
-LIBS="-lsidplay"
-
-AC_CACHE_VAL(ac_cv_sidplay_works,
-[
-
-  AC_LANG_CPLUSPLUS
-  AC_TRY_RUN([
-    #include <sidplay/player.h>
-  
-    int main()
-    {
-      sidTune tune = sidTune(0);
-    }
-    ],
-    ac_cv_sidplay_works="yes",
-    ac_cv_sidplay_works="no",
-    ac_cv_sidplay_works="no")
-  AC_LANG_C
-])
-    
-CXXFLAGS="$ac_cxxflags_safe"
-LDFLAGS="$ac_ldflags_safe"
-LIBS="$ac_libs_safe"
-      
-AC_MSG_RESULT([$ac_cv_sidplay_works])
-
-  have_sidplay=no
-fi
-  
-AC_SUBST(SIDPLAY_CFLAGS)  
-AC_SUBST(SIDPLAY_LIBS)
-      
-AC_SUBST(sidplay_library)
-AC_SUBST(sidplay_cflags)
-  
-])
-
diff --git a/m4/libmikmod.m4 b/m4/libmikmod.m4
deleted file mode 100644
index a87f6572d..000000000
--- a/m4/libmikmod.m4
+++ /dev/null
@@ -1,207 +0,0 @@
-# Configure paths for libmikmod
-#
-# Derived from glib.m4 (Owen Taylor 97-11-3)
-# Improved by Chris Butler
-#
-
-dnl AM_PATH_LIBMIKMOD([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND ]]])
-dnl Test for libmikmod, and define LIBMIKMOD_CFLAGS, LIBMIKMOD_LIBS and
-dnl LIBMIKMOD_LDADD
-dnl
-AC_DEFUN(AM_PATH_LIBMIKMOD,
-[dnl 
-dnl Get the cflags and libraries from the libmikmod-config script
-dnl
-AC_ARG_WITH(libmikmod-prefix,[  --with-libmikmod-prefix=PFX   Prefix where libmikmod is installed (optional)],
-            libmikmod_config_prefix="$withval", libmikmod_config_prefix="")
-AC_ARG_WITH(libmikmod-exec-prefix,[  --with-libmikmod-exec-prefix=PFX Exec prefix where libmikmod is installed (optional)],
-            libmikmod_config_exec_prefix="$withval", libmikmod_config_exec_prefix="")
-AC_ARG_ENABLE(libmikmodtest, [  --disable-libmikmodtest       Do not try to compile and run a test libmikmod program],
-		    , enable_libmikmodtest=yes)
-
-  if test x$libmikmod_config_exec_prefix != x ; then
-     libmikmod_config_args="$libmikmod_config_args --exec-prefix=$libmikmod_config_exec_prefix"
-     if test x${LIBMIKMOD_CONFIG+set} != xset ; then
-        LIBMIKMOD_CONFIG=$libmikmod_config_exec_prefix/bin/libmikmod-config
-     fi
-  fi
-  if test x$libmikmod_config_prefix != x ; then
-     libmikmod_config_args="$libmikmod_config_args --prefix=$libmikmod_config_prefix"
-     if test x${LIBMIKMOD_CONFIG+set} != xset ; then
-        LIBMIKMOD_CONFIG=$libmikmod_config_prefix/bin/libmikmod-config
-     fi
-  fi
-
-  AC_PATH_PROG(LIBMIKMOD_CONFIG, libmikmod-config, no)
-  min_libmikmod_version=ifelse([$1], ,3.1.5,$1)
-  AC_MSG_CHECKING(for libmikmod - version >= $min_libmikmod_version)
-  no_libmikmod=""
-  if test "$LIBMIKMOD_CONFIG" = "no" ; then
-    no_libmikmod=yes
-  else
-    LIBMIKMOD_CFLAGS=`$LIBMIKMOD_CONFIG $libmikmod_config_args --cflags`
-    LIBMIKMOD_LIBS=`$LIBMIKMOD_CONFIG $libmikmod_config_args --libs`
-    LIBMIKMOD_LDADD=`$LIBMIKMOD_CONFIG $libmikmod_config_args --ldadd`
-    libmikmod_config_major_version=`$LIBMIKMOD_CONFIG $libmikmod_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\1/'`
-    libmikmod_config_minor_version=`$LIBMIKMOD_CONFIG $libmikmod_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\2/'`
-    libmikmod_config_micro_version=`$LIBMIKMOD_CONFIG $libmikmod_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\3/'`
-    if test "x$enable_libmikmodtest" = "xyes" ; then
-      ac_save_CFLAGS="$CFLAGS"
-      ac_save_LIBS="$LIBS"
-	  AC_LANG_SAVE
-	  AC_LANG_C
-      CFLAGS="$CFLAGS $LIBMIKMOD_CFLAGS $LIBMIKMOD_LDADD"
-      LIBS="$LIBMIKMOD_LIBS $LIBS"
-dnl
-dnl Now check if the installed libmikmod is sufficiently new. (Also sanity
-dnl checks the results of libmikmod-config to some extent
-dnl
-      rm -f conf.mikmodtest
-      AC_TRY_RUN([
-#include <mikmod.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-char* my_strdup (char *str)
-{
-  char *new_str;
-
-  if (str) {
-    new_str = malloc ((strlen (str) + 1) * sizeof(char));
-    strcpy (new_str, str);
-  } else
-    new_str = NULL;
-
-  return new_str;
-}
-
-int main()
-{
-  int major,minor,micro;
-  int libmikmod_major_version,libmikmod_minor_version,libmikmod_micro_version;
-  char *tmp_version;
-
-  system("touch conf.mikmodtest");
-
-  /* HP/UX 9 (%@#!) writes to sscanf strings */
-  tmp_version = my_strdup("$min_libmikmod_version");
-  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
-     printf("%s, bad version string\n", "$min_libmikmod_version");
-     exit(1);
-   }
-
-  libmikmod_major_version=(MikMod_GetVersion() >> 16) & 255;
-  libmikmod_minor_version=(MikMod_GetVersion() >>  8) & 255;
-  libmikmod_micro_version=(MikMod_GetVersion()      ) & 255;
-
-  if ((libmikmod_major_version != $libmikmod_config_major_version) ||
-      (libmikmod_minor_version != $libmikmod_config_minor_version) ||
-      (libmikmod_micro_version != $libmikmod_config_micro_version))
-    {
-      printf("\n*** 'libmikmod-config --version' returned %d.%d.%d, but libmikmod (%d.%d.%d)\n", 
-             $libmikmod_config_major_version, $libmikmod_config_minor_version, $libmikmod_config_micro_version,
-             libmikmod_major_version, libmikmod_minor_version, libmikmod_micro_version);
-      printf ("*** was found! If libmikmod-config was correct, then it is best\n");
-      printf ("*** to remove the old version of libmikmod. You may also be able to fix the error\n");
-      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
-      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
-      printf("*** required on your system.\n");
-      printf("*** If libmikmod-config was wrong, set the environment variable LIBMIKMOD_CONFIG\n");
-      printf("*** to point to the correct copy of libmikmod-config, and remove the file config.cache\n");
-      printf("*** before re-running configure\n");
-    } 
-  else if ((libmikmod_major_version != LIBMIKMOD_VERSION_MAJOR) ||
-	   (libmikmod_minor_version != LIBMIKMOD_VERSION_MINOR) ||
-           (libmikmod_micro_version != LIBMIKMOD_REVISION))
-    {
-      printf("*** libmikmod header files (version %d.%d.%d) do not match\n",
-	     LIBMIKMOD_VERSION_MAJOR, LIBMIKMOD_VERSION_MINOR, LIBMIKMOD_REVISION);
-      printf("*** library (version %d.%d.%d)\n",
-	     libmikmod_major_version, libmikmod_minor_version, libmikmod_micro_version);
-    }
-  else
-    {
-      if ((libmikmod_major_version > major) ||
-        ((libmikmod_major_version == major) && (libmikmod_minor_version > minor)) ||
-        ((libmikmod_major_version == major) && (libmikmod_minor_version == minor) && (libmikmod_micro_version >= micro)))
-      {
-        return 0;
-       }
-     else
-      {
-        printf("\n*** An old version of libmikmod (%d.%d.%d) was found.\n",
-               libmikmod_major_version, libmikmod_minor_version, libmikmod_micro_version);
-        printf("*** You need a version of libmikmod newer than %d.%d.%d.\n",
-	       major, minor, micro);
-        printf("***\n");
-        printf("*** If you have already installed a sufficiently new version, this error\n");
-        printf("*** probably means that the wrong copy of the libmikmod-config shell script is\n");
-        printf("*** being found. The easiest way to fix this is to remove the old version\n");
-        printf("*** of libmikmod, but you can also set the LIBMIKMOD_CONFIG environment to point to the\n");
-        printf("*** correct copy of libmikmod-config. (In this case, you will have to\n");
-        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
-        printf("*** so that the correct libraries are found at run-time))\n");
-      }
-    }
-  return 1;
-}
-],, no_libmikmod=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
-       CFLAGS="$ac_save_CFLAGS"
-       LIBS="$ac_save_LIBS"
-	   AC_LANG_RESTORE
-     fi
-  fi
-  if test "x$no_libmikmod" = x ; then
-     AC_MSG_RESULT([yes, `$LIBMIKMOD_CONFIG --version`])
-     ifelse([$2], , :, [$2])     
-  else
-     AC_MSG_RESULT(no)
-     if test "$LIBMIKMOD_CONFIG" = "no" ; then
-       echo "*** The libmikmod-config script installed by libmikmod could not be found"
-       echo "*** If libmikmod was installed in PREFIX, make sure PREFIX/bin is in"
-       echo "*** your path, or set the LIBMIKMOD_CONFIG environment variable to the"
-       echo "*** full path to libmikmod-config."
-     else
-       if test -f conf.mikmodtest ; then
-        :
-       else
-          echo "*** Could not run libmikmod test program, checking why..."
-          CFLAGS="$CFLAGS $LIBMIKMOD_CFLAGS"
-          LIBS="$LIBS $LIBMIKMOD_LIBS"
-		  AC_LANG_SAVE
-		  AC_LANG_C
-          AC_TRY_LINK([
-#include <mikmod.h>
-#include <stdio.h>
-],      [ return (MikMod_GetVersion()!=0); ],
-        [ echo "*** The test program compiled, but did not run. This usually means"
-          echo "*** that the run-time linker is not finding libmikmod or finding the wrong"
-          echo "*** version of libmikmod. If it is not finding libmikmod, you'll need to set your"
-          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
-          echo "*** to the installed location. Also, make sure you have run ldconfig if that"
-          echo "*** is required on your system."
-	  echo "***"
-          echo "*** If you have an old version installed, it is best to remove it, although"
-          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
-        [ echo "*** The test program failed to compile or link. See the file config.log for the"
-          echo "*** exact error that occured. This usually means libmikmod was incorrectly installed"
-          echo "*** or that you have moved libmikmod since it was installed. In the latter case, you"
-          echo "*** may want to edit the libmikmod-config script: $LIBMIKMOD_CONFIG" ])
-          CFLAGS="$ac_save_CFLAGS"
-          LIBS="$ac_save_LIBS"
-		  AC_LANG_RESTORE
-       fi
-     fi
-     LIBMIKMOD_CFLAGS=""
-     LIBMIKMOD_LIBS=""
-     LIBMIKMOD_LDADD=""
-     ifelse([$3], , :, [$3])
-  fi
-  AC_SUBST(LIBMIKMOD_CFLAGS)
-  AC_SUBST(LIBMIKMOD_LIBS)
-  AC_SUBST(LIBMIKMOD_LDADD)
-  rm -f conf.mikmodtest
-])
diff --git a/m4/vorbis.m4 b/m4/vorbis.m4
deleted file mode 100644
index 1c0d8460c..000000000
--- a/m4/vorbis.m4
+++ /dev/null
@@ -1,100 +0,0 @@
-# Configure paths for libvorbis
-# Jack Moffitt <jack@icecast.org> 10-21-2000
-# Shamelessly stolen from Owen Taylor and Manish Singh
-
-dnl AM_PATH_VORBIS([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
-dnl Test for libvorbis, and define VORBIS_CFLAGS and VORBIS_LIBS
-dnl
-AC_DEFUN(AM_PATH_VORBIS,
-[dnl 
-dnl Get the cflags and libraries
-dnl
-AC_ARG_WITH(vorbis-prefix,[  --with-vorbis-prefix=PFX   Prefix where libvorbis is installed (optional)], vorbis_prefix="$withval", vorbis_prefix="")
-AC_ARG_ENABLE(vorbistest, [  --disable-vorbistest       Do not try to compile and run a test Vorbis program],, enable_vorbistest=yes)
-
-  if test "x$vorbis_prefix" != "xNONE" ; then
-    vorbis_args="$vorbis_args --prefix=$vorbis_prefix"
-    VORBIS_CFLAGS="-I$vorbis_prefix/include"
-    VORBIS_LIBDIR="-L$vorbis_prefix/lib"
-  elif test "$prefix" != ""; then
-    vorbis_args="$vorbis_args --prefix=$prefix"
-    VORBIS_CFLAGS="-I$prefix/include"
-    VORBIS_LIBDIR="-L$prefix/lib"
-  fi
-
-  VORBIS_LIBS="$VORBIS_LIBDIR -lvorbis -lm"
-  VORBISFILE_LIBS="-lvorbisfile"
-  VORBISENC_LIBS="-lvorbisenc"
-
-  AC_MSG_CHECKING(for Vorbis)
-  no_vorbis=""
-
-
-  if test "x$enable_vorbistest" = "xyes" ; then
-    ac_save_CFLAGS="$CFLAGS"
-    ac_save_LIBS="$LIBS"
-    CFLAGS="$CFLAGS $VORBIS_CFLAGS"
-    LIBS="$LIBS $VORBIS_LIBS $OGG_LIBS"
-dnl
-dnl Now check if the installed Vorbis is sufficiently new.
-dnl
-      rm -f conf.vorbistest
-      AC_TRY_RUN([
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <vorbis/codec.h>
-
-int main ()
-{
-  system("touch conf.vorbistest");
-  return 0;
-}
-
-],, no_vorbis=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
-       CFLAGS="$ac_save_CFLAGS"
-       LIBS="$ac_save_LIBS"
-  fi
-
-  if test "x$no_vorbis" = "x" ; then
-     AC_MSG_RESULT(yes)
-     ifelse([$1], , :, [$1])     
-  else
-     AC_MSG_RESULT(no)
-     if test -f conf.vorbistest ; then
-       :
-     else
-       echo "*** Could not run Vorbis test program, checking why..."
-       CFLAGS="$CFLAGS $VORBIS_CFLAGS"
-       LIBS="$LIBS $VORBIS_LIBS $OGG_LIBS"
-       AC_TRY_LINK([
-#include <stdio.h>
-#include <vorbis/codec.h>
-],     [ return 0; ],
-       [ echo "*** The test program compiled, but did not run. This usually means"
-       echo "*** that the run-time linker is not finding Vorbis or finding the wrong"
-       echo "*** version of Vorbis. If it is not finding Vorbis, you'll need to set your"
-       echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
-       echo "*** to the installed location  Also, make sure you have run ldconfig if that"
-       echo "*** is required on your system"
-       echo "***"
-       echo "*** If you have an old version installed, it is best to remove it, although"
-       echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
-       [ echo "*** The test program failed to compile or link. See the file config.log for the"
-       echo "*** exact error that occured. This usually means Vorbis was incorrectly installed"
-       echo "*** or that you have moved Vorbis since it was installed." ])
-       CFLAGS="$ac_save_CFLAGS"
-       LIBS="$ac_save_LIBS"
-     fi
-     VORBIS_CFLAGS=""
-     VORBIS_LIBS=""
-     VORBISFILE_LIBS=""
-     VORBISENC_LIBS=""
-     ifelse([$2], , :, [$2])
-  fi
-  AC_SUBST(VORBIS_CFLAGS)
-  AC_SUBST(VORBIS_LIBS)
-  AC_SUBST(VORBISFILE_LIBS)
-  AC_SUBST(VORBISENC_LIBS)
-  rm -f conf.vorbistest
-])
diff --git a/m4/xmms.m4 b/m4/xmms.m4
deleted file mode 100644
index 6d1489bf1..000000000
--- a/m4/xmms.m4
+++ /dev/null
@@ -1,148 +0,0 @@
-# CFLAGS and library paths for XMMS
-# written 15 December 1999 by Ben Gertzfield <che@debian.org>
-
-dnl Usage:
-dnl AM_PATH_XMMS([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
-dnl
-dnl Example:
-dnl AM_PATH_XMMS(0.9.5.1, , AC_MSG_ERROR([*** XMMS >= 0.9.5.1 not installed - please install first ***]))
-dnl
-dnl Defines XMMS_CFLAGS, XMMS_LIBS, XMMS_DATA_DIR, XMMS_PLUGIN_DIR, 
-dnl XMMS_VISUALIZATION_PLUGIN_DIR, XMMS_INPUT_PLUGIN_DIR, 
-dnl XMMS_OUTPUT_PLUGIN_DIR, XMMS_GENERAL_PLUGIN_DIR, XMMS_EFFECT_PLUGIN_DIR,
-dnl and XMMS_VERSION for your plugin pleasure.
-dnl
-
-dnl XMMS_TEST_VERSION(AVAILABLE-VERSION, NEEDED-VERSION [, ACTION-IF-OKAY [, ACTION-IF-NOT-OKAY]])
-AC_DEFUN(XMMS_TEST_VERSION, [
-
-# Determine which version number is greater. Prints 2 to stdout if	
-# the second number is greater, 1 if the first number is greater,	
-# 0 if the numbers are equal.						
-									
-# Written 15 December 1999 by Ben Gertzfield <che@debian.org>		
-# Revised 15 December 1999 by Jim Monty <monty@primenet.com>		
-									
-    AC_PROG_AWK
-    xmms_got_version=[` $AWK '						\
-BEGIN {									\
-    print vercmp(ARGV[1], ARGV[2]);					\
-}									\
-									\
-function vercmp(ver1, ver2,    ver1arr, ver2arr,			\
-                               ver1len, ver2len,			\
-                               ver1int, ver2int, len, i, p) {		\
-									\
-    ver1len = split(ver1, ver1arr, /\./);				\
-    ver2len = split(ver2, ver2arr, /\./);				\
-									\
-    len = ver1len > ver2len ? ver1len : ver2len;			\
-									\
-    for (i = 1; i <= len; i++) {					\
-        p = 1000 ^ (len - i);						\
-        ver1int += ver1arr[i] * p;					\
-        ver2int += ver2arr[i] * p;					\
-    }									\
-									\
-    if (ver1int < ver2int)						\
-        return 2;							\
-    else if (ver1int > ver2int)						\
-        return 1;							\
-    else								\
-        return 0;							\
-}' $1 $2`]								
-
-    if test $xmms_got_version -eq 2; then 	# failure
-	ifelse([$4], , :, $4)			
-    else  					# success!
-	ifelse([$3], , :, $3)
-    fi
-])
-
-AC_DEFUN(AM_PATH_XMMS,
-[
-AC_ARG_WITH(xmms-prefix,[  --with-xmms-prefix=PFX  Prefix where XMMS is installed (optional)],
-	xmms_config_prefix="$withval", xmms_config_prefix="")
-AC_ARG_WITH(xmms-exec-prefix,[  --with-xmms-exec-prefix=PFX Exec prefix where XMMS is installed (optional)],
-	xmms_config_exec_prefix="$withval", xmms_config_exec_prefix="")
-
-if test x$xmms_config_exec_prefix != x; then
-    xmms_config_args="$xmms_config_args --exec-prefix=$xmms_config_exec_prefix"
-    if test x${XMMS_CONFIG+set} != xset; then
-	XMMS_CONFIG=$xmms_config_exec_prefix/bin/xmms-config
-    fi
-fi
-
-if test x$xmms_config_prefix != x; then
-    xmms_config_args="$xmms_config_args --prefix=$xmms_config_prefix"
-    if test x${XMMS_CONFIG+set} != xset; then
-  	XMMS_CONFIG=$xmms_config_prefix/bin/xmms-config
-    fi
-fi
-
-AC_PATH_PROG(XMMS_CONFIG, xmms-config, no)
-min_xmms_version=ifelse([$1], ,0.9.5.1, $1)
-
-if test "$XMMS_CONFIG" = "no"; then
-    no_xmms=yes
-else
-    XMMS_CFLAGS=`$XMMS_CONFIG $xmms_config_args --cflags`
-    XMMS_LIBS=`$XMMS_CONFIG $xmms_config_args --libs`
-    XMMS_VERSION=`$XMMS_CONFIG $xmms_config_args --version`
-    XMMS_DATA_DIR=`$XMMS_CONFIG $xmms_config_args --data-dir`
-    XMMS_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --plugin-dir`
-    XMMS_VISUALIZATION_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args \
-					--visualization-plugin-dir`
-    XMMS_INPUT_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --input-plugin-dir`
-    XMMS_OUTPUT_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --output-plugin-dir`
-    XMMS_EFFECT_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --effect-plugin-dir`
-    XMMS_GENERAL_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --general-plugin-dir`
-
-    XMMS_TEST_VERSION($XMMS_VERSION, $min_xmms_version, ,no_xmms=version)
-fi
-
-AC_MSG_CHECKING(for XMMS - version >= $min_xmms_version)
-
-if test "x$no_xmms" = x; then
-    AC_MSG_RESULT(yes)
-    ifelse([$2], , :, [$2])
-else
-    AC_MSG_RESULT(no)
-
-    if test "$XMMS_CONFIG" = "no" ; then
-	echo "*** The xmms-config script installed by XMMS could not be found."
-      	echo "*** If XMMS was installed in PREFIX, make sure PREFIX/bin is in"
-	echo "*** your path, or set the XMMS_CONFIG environment variable to the"
-	echo "*** full path to xmms-config."
-    else
-	if test "$no_xmms" = "version"; then
-	    echo "*** An old version of XMMS, $XMMS_VERSION, was found."
-	    echo "*** You need a version of XMMS newer than $min_xmms_version."
-	    echo "*** The latest version of XMMS is always available from"
-	    echo "*** http://www.xmms.org/"
-	    echo "***"
-
-            echo "*** If you have already installed a sufficiently new version, this error"
-            echo "*** probably means that the wrong copy of the xmms-config shell script is"
-            echo "*** being found. The easiest way to fix this is to remove the old version"
-            echo "*** of XMMS, but you can also set the XMMS_CONFIG environment to point to the"
-            echo "*** correct copy of xmms-config. (In this case, you will have to"
-            echo "*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf"
-            echo "*** so that the correct libraries are found at run-time)"
-	fi
-    fi
-    XMMS_CFLAGS=""
-    XMMS_LIBS=""
-    ifelse([$3], , :, [$3])
-fi
-AC_SUBST(XMMS_CFLAGS)
-AC_SUBST(XMMS_LIBS)
-AC_SUBST(XMMS_VERSION)
-AC_SUBST(XMMS_DATA_DIR)
-AC_SUBST(XMMS_PLUGIN_DIR)
-AC_SUBST(XMMS_VISUALIZATION_PLUGIN_DIR)
-AC_SUBST(XMMS_INPUT_PLUGIN_DIR)
-AC_SUBST(XMMS_OUTPUT_PLUGIN_DIR)
-AC_SUBST(XMMS_GENERAL_PLUGIN_DIR)
-AC_SUBST(XMMS_EFFECT_PLUGIN_DIR)
-])