removing m4 dir

Original commit message from CVS:
removing m4 dir

9 files changed, 2 insertions, 639 deletions

diff --git a/autogen.sh b/autogen.sh
index 890a3f564..2252f3dd9 100755
--- a/autogen.sh
+++ b/autogen.sh
@@ -45,7 +45,7 @@ fi
 
 toplevel_check $srcfile
 
-tool_run "aclocal" "-I m4 -I common/m4 $ACLOCAL_FLAGS"
+tool_run "aclocal" "-I common/m4 $ACLOCAL_FLAGS"
 
 # FIXME : why does libtoolize keep complaining about aclocal ?
 
diff --git a/common b/common
-Subproject f1ddfc229b82ca75ab21707a0c52a0bcdb21d5d
+Subproject 42efc7fe3eda3ea184fa620f2e0dbc4977f16c2
diff --git a/configure.ac b/configure.ac
index 561659671..cf4cc9cfa 100644
--- a/configure.ac
+++ b/configure.ac
@@ -11,7 +11,7 @@ AM_CONFIG_HEADER(config.h)
 
 dnl Add parameters for aclocal
 dnl (This must come after AM_INIT_AUTOMAKE, since it modifies ACLOCAL)
-ACLOCAL="cat m4/*.m4 >acinclude.m4;$ACLOCAL $ACLOCAL_FLAGS"
+ACLOCAL="$ACLOCAL -I common/m4 $ACLOCAL_FLAGS"
 
 AM_MAINTAINER_MODE
 
@@ -411,7 +411,6 @@ dnl libs/ext/Makefile
 AC_OUTPUT(
 Makefile
 include/Makefile
-m4/Makefile
 gst/Makefile
 gst/gstversion.h
 gst/types/Makefile
diff --git a/m4/Makefile.am b/m4/Makefile.am
deleted file mode 100644
index 7c718864b..000000000
--- a/m4/Makefile.am
+++ /dev/null
@@ -1,5 +0,0 @@
-EXTRA_DIST = \
-	glib.m4 \
-	gst-feature.m4 \
-	gtk.m4 \
-	README
diff --git a/m4/README b/m4/README
deleted file mode 100644
index f04459850..000000000
--- a/m4/README
+++ /dev/null
@@ -1,3 +0,0 @@
-All aclocal .m4 files we need are put here and cat'd to acinclude.m4 in 
-the source root.  Official ones (taken from the relevant devel packages) 
-are named as-is, unofficial ones (or changed ones) get a gst-prefix.
diff --git a/m4/glib.m4 b/m4/glib.m4
deleted file mode 100644
index b8094bbfe..000000000
--- a/m4/glib.m4
+++ /dev/null
@@ -1,196 +0,0 @@
-# Configure paths for GLIB
-# Owen Taylor     97-11-3
-
-dnl AM_PATH_GLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
-dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or 
-dnl gthread is specified in MODULES, pass to glib-config
-dnl
-AC_DEFUN(AM_PATH_GLIB,
-[dnl 
-dnl Get the cflags and libraries from the glib-config script
-dnl
-AC_ARG_WITH(glib-prefix,[  --with-glib-prefix=PFX   Prefix where GLIB is installed (optional)],
-            glib_config_prefix="$withval", glib_config_prefix="")
-AC_ARG_WITH(glib-exec-prefix,[  --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)],
-            glib_config_exec_prefix="$withval", glib_config_exec_prefix="")
-AC_ARG_ENABLE(glibtest, [  --disable-glibtest       Do not try to compile and run a test GLIB program],
-		    , enable_glibtest=yes)
-
-  if test x$glib_config_exec_prefix != x ; then
-     glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix"
-     if test x${GLIB_CONFIG+set} != xset ; then
-        GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config
-     fi
-  fi
-  if test x$glib_config_prefix != x ; then
-     glib_config_args="$glib_config_args --prefix=$glib_config_prefix"
-     if test x${GLIB_CONFIG+set} != xset ; then
-        GLIB_CONFIG=$glib_config_prefix/bin/glib-config
-     fi
-  fi
-
-  for module in . $4
-  do
-      case "$module" in
-         gmodule) 
-             glib_config_args="$glib_config_args gmodule"
-         ;;
-         gthread) 
-             glib_config_args="$glib_config_args gthread"
-         ;;
-      esac
-  done
-
-  AC_PATH_PROG(GLIB_CONFIG, glib-config, no)
-  min_glib_version=ifelse([$1], ,0.99.7,$1)
-  AC_MSG_CHECKING(for GLIB - version >= $min_glib_version)
-  no_glib=""
-  if test "$GLIB_CONFIG" = "no" ; then
-    no_glib=yes
-  else
-    GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags`
-    GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs`
-    glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-    glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-    glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-    if test "x$enable_glibtest" = "xyes" ; then
-      ac_save_CFLAGS="$CFLAGS"
-      ac_save_LIBS="$LIBS"
-      CFLAGS="$CFLAGS $GLIB_CFLAGS"
-      LIBS="$GLIB_LIBS $LIBS"
-dnl
-dnl Now check if the installed GLIB is sufficiently new. (Also sanity
-dnl checks the results of glib-config to some extent
-dnl
-      rm -f conf.glibtest
-      AC_TRY_RUN([
-#include <glib.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-int 
-main ()
-{
-  int major, minor, micro;
-  char *tmp_version;
-
-  system ("touch conf.glibtest");
-
-  /* HP/UX 9 (%@#!) writes to sscanf strings */
-  tmp_version = g_strdup("$min_glib_version");
-  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
-     printf("%s, bad version string\n", "$min_glib_version");
-     exit(1);
-   }
-
-  if ((glib_major_version != $glib_config_major_version) ||
-      (glib_minor_version != $glib_config_minor_version) ||
-      (glib_micro_version != $glib_config_micro_version))
-    {
-      printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", 
-             $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
-             glib_major_version, glib_minor_version, glib_micro_version);
-      printf ("*** was found! If glib-config was correct, then it is best\n");
-      printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n");
-      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
-      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
-      printf("*** required on your system.\n");
-      printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n");
-      printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n");
-      printf("*** before re-running configure\n");
-    } 
-  else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
-	   (glib_minor_version != GLIB_MINOR_VERSION) ||
-           (glib_micro_version != GLIB_MICRO_VERSION))
-    {
-      printf("*** GLIB header files (version %d.%d.%d) do not match\n",
-	     GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
-      printf("*** library (version %d.%d.%d)\n",
-	     glib_major_version, glib_minor_version, glib_micro_version);
-    }
-  else
-    {
-      if ((glib_major_version > major) ||
-        ((glib_major_version == major) && (glib_minor_version > minor)) ||
-        ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
-      {
-        return 0;
-       }
-     else
-      {
-        printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
-               glib_major_version, glib_minor_version, glib_micro_version);
-        printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
-	       major, minor, micro);
-        printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
-        printf("***\n");
-        printf("*** If you have already installed a sufficiently new version, this error\n");
-        printf("*** probably means that the wrong copy of the glib-config shell script is\n");
-        printf("*** being found. The easiest way to fix this is to remove the old version\n");
-        printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n");
-        printf("*** correct copy of glib-config. (In this case, you will have to\n");
-        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
-        printf("*** so that the correct libraries are found at run-time))\n");
-      }
-    }
-  return 1;
-}
-],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
-       CFLAGS="$ac_save_CFLAGS"
-       LIBS="$ac_save_LIBS"
-     fi
-  fi
-  if test "x$no_glib" = x ; then
-     AC_MSG_RESULT(yes)
-     ifelse([$2], , :, [$2])     
-  else
-     AC_MSG_RESULT(no)
-     if test "$GLIB_CONFIG" = "no" ; then
-       echo "*** The glib-config script installed by GLIB could not be found"
-       echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in"
-       echo "*** your path, or set the GLIB_CONFIG environment variable to the"
-       echo "*** full path to glib-config."
-     else
-       if test -f conf.glibtest ; then
-        :
-       else
-          echo "*** Could not run GLIB test program, checking why..."
-          CFLAGS="$CFLAGS $GLIB_CFLAGS"
-          LIBS="$LIBS $GLIB_LIBS"
-          AC_TRY_LINK([
-#include <glib.h>
-#include <stdio.h>
-],      [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
-        [ echo "*** The test program compiled, but did not run. This usually means"
-          echo "*** that the run-time linker is not finding GLIB or finding the wrong"
-          echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
-          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
-          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
-          echo "*** is required on your system"
-	  echo "***"
-          echo "*** If you have an old version installed, it is best to remove it, although"
-          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
-          echo "***"
-          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
-          echo "*** came with the system with the command"
-          echo "***"
-          echo "***    rpm --erase --nodeps gtk gtk-devel" ],
-        [ echo "*** The test program failed to compile or link. See the file config.log for the"
-          echo "*** exact error that occured. This usually means GLIB was incorrectly installed"
-          echo "*** or that you have moved GLIB since it was installed. In the latter case, you"
-          echo "*** may want to edit the glib-config script: $GLIB_CONFIG" ])
-          CFLAGS="$ac_save_CFLAGS"
-          LIBS="$ac_save_LIBS"
-       fi
-     fi
-     GLIB_CFLAGS=""
-     GLIB_LIBS=""
-     ifelse([$3], , :, [$3])
-  fi
-  AC_SUBST(GLIB_CFLAGS)
-  AC_SUBST(GLIB_LIBS)
-  rm -f conf.glibtest
-])
diff --git a/m4/gst-feature.m4 b/m4/gst-feature.m4
deleted file mode 100644
index a0dc39c84..000000000
--- a/m4/gst-feature.m4
+++ /dev/null
@@ -1,182 +0,0 @@
-dnl Perform a check for a feature for GStreamer
-dnl Richard Boulton <richard-alsa@tartarus.org>
-dnl Thomas Vander Stichele <thomas@apestaart.org> added useful stuff
-dnl Last modification: 25/06/2001
-dnl GST_CHECK_FEATURE(FEATURE-NAME, FEATURE-DESCRIPTION,
-dnl                   DEPENDENT-PLUGINS, TEST-FOR-FEATURE,
-dnl                   DISABLE-BY-DEFAULT, ACTION-IF-USE, ACTION-IF-NOTUSE)
-dnl
-dnl This macro adds a command line argument to enable the user to enable
-dnl or disable a feature, and if the feature is enabled, performs a supplied
-dnl test to check if the feature is available.
-dnl
-dnl The test should define HAVE_<FEATURE-NAME> to "yes" or "no" depending
-dnl on whether the feature is available.
-dnl
-dnl The macro will set USE_<FEATURE-NAME> to "yes" or "no" depending on
-dnl whether the feature is to be used.
-dnl Thomas changed this, so that when USE_<FEATURE-NAME> was already set
-dnl to no, then it stays that way.
-dnl
-dnl The macro will call AM_CONDITIONAL(USE_<<FEATURE-NAME>, ...) to allow
-dnl the feature to control what is built in Makefile.ams.  If you want
-dnl additional actions resulting from the test, you can add them with the
-dnl ACTION-IF-USE and ACTION-IF-NOTUSE parameters.
-dnl 
-dnl FEATURE-NAME        is the name of the feature, and should be in
-dnl                     purely upper case characters.
-dnl FEATURE-DESCRIPTION is used to describe the feature in help text for
-dnl                     the command line argument.
-dnl DEPENDENT-PLUGINS   lists any plugins which depend on this feature.
-dnl TEST-FOR-FEATURE    is a test which sets HAVE_<FEATURE-NAME> to "yes"
-dnl                     or "no" depending on whether the feature is
-dnl                     available.
-dnl DISABLE-BY-DEFAULT  if "disabled", the feature is disabled by default,
-dnl                     if any other value, the feature is enabled by default.
-dnl ACTION-IF-USE       any extra actions to perform if the feature is to be
-dnl                     used.
-dnl ACTION-IF-NOTUSE    any extra actions to perform if the feature is not to
-dnl                     be used.
-dnl
-dnl
-dnl thomas :
-dnl we also added a history.  
-dnl GST_PLUGINS_YES will contain all plugins to be built
-dnl                 that were checked through GST_CHECK_FEATURE
-dnl GST_PLUGINS_NO will contain those that won't be built
-
-AC_DEFUN(GST_CHECK_FEATURE,
-[dnl
-builtin(define, [gst_endisable], ifelse($5, [disabled], [enable], [disable]))dnl
-dnl if it is set to NO, then don't even consider it for building
-NOUSE=
-if test "x$USE_[$1]" = "xno"; then
-  NOUSE="yes"
-fi
-AC_ARG_ENABLE(translit([$1], A-Z, a-z),
-  [  ]builtin(format, --%-26s gst_endisable %s, gst_endisable-translit([$1], A-Z, a-z), [$2]ifelse([$3],,,: [$3])),
-  [ case "${enableval}" in
-      yes) USE_[$1]=yes;;
-      no) USE_[$1]=no;;
-      *) AC_MSG_ERROR(bad value ${enableval} for --enable-translit([$1], A-Z, a-z)) ;;
-    esac],
-  [ USE_$1=]ifelse($5, [disabled], [no], [yes]))           dnl DEFAULT
-
-dnl *** set it back to no if it was preset to no
-if test "x$NOUSE" = "xyes"; then
-  USE_[$1]="no"
-  AC_MSG_WARN(*** $3 pre-configured not to be built)
-fi
-NOUSE=
-
-dnl *** If it's enabled
-
-if test x$USE_[$1] = xyes; then
-  gst_check_save_LIBS=$LIBS
-  gst_check_save_LDFLAGS=$LDFLAGS
-  gst_check_save_CFLAGS=$CFLAGS
-  gst_check_save_CPPFLAGS=$CPPFLAGS
-  gst_check_save_CXXFLAGS=$CXXFLAGS
-  HAVE_[$1]=no
-  $4
-  LIBS=$gst_check_save_LIBS
-  LDFLAGS=$gst_check_save_LDFLAGS
-  CFLAGS=$gst_check_save_CFLAGS
-  CPPFLAGS=$gst_check_save_CPPFLAGS
-  CXXFLAGS=$gst_check_save_CXXFLAGS
-
-  dnl If it isn't found, unset USE_[$1]
-  if test x$HAVE_[$1] = xno; then
-    USE_[$1]=no
-  fi
-fi
-dnl *** Warn if it's disabled or not found
-if test x$USE_[$1] = xyes; then
-  ifelse([$6], , :, [$6])
-  GST_PLUGINS_YES="$GST_PLUGINS_YES \n\t[$3]"
-else
-  ifelse([$3], , :, [AC_MSG_NOTICE(
-These plugins will not be built: [$3]
-)])
-  GST_PLUGINS_NO="$GST_PLUGINS_NO \n\t[$3]"
-  ifelse([$7], , :, [$7])
-fi
-dnl *** Define the conditional as appropriate
-AM_CONDITIONAL(USE_[$1], test x$USE_[$1] = xyes)
-])
-
-dnl Use a -config program which accepts --cflags and --libs parameters
-dnl to set *_CFLAGS and *_LIBS and check existence of a feature.
-dnl Richard Boulton <richard-alsa@tartarus.org>
-dnl Last modification: 26/06/2001
-dnl GST_CHECK_CONFIGPROG(FEATURE-NAME, CONFIG-PROG-FILENAME, MODULES)
-dnl
-dnl This check was written for GStreamer: it should be renamed and checked
-dnl for portability if you decide to use it elsewhere.
-dnl
-AC_DEFUN(GST_CHECK_CONFIGPROG,
-[
-  AC_PATH_PROG([$1]_CONFIG, [$2], no)
-  if test x$[$1]_CONFIG = xno; then
-    [$1]_LIBS=
-    [$1]_CFLAGS=
-    HAVE_[$1]=no
-  else
-    [$1]_LIBS=`[$2] --libs [$3]`
-    [$1]_CFLAGS=`[$2] --cflags [$3]`
-    HAVE_[$1]=yes
-  fi
-  AC_SUBST([$1]_LIBS)
-  AC_SUBST([$1]_CFLAGS)
-])
-
-dnl Use AC_CHECK_LIB and AC_CHECK_HEADER to do both tests at once
-dnl sets HAVE_module if we have it
-dnl Richard Boulton <richard-alsa@tartarus.org>
-dnl Last modification: 26/06/2001
-dnl GST_CHECK_LIBHEADER(FEATURE-NAME, LIB NAME, LIB FUNCTION, EXTRA LD FLAGS, 
-dnl                     HEADER NAME, ACTION-IF-FOUND, ACTION-IF-NOT-FOUND)
-dnl
-dnl This check was written for GStreamer: it should be renamed and checked
-dnl for portability if you decide to use it elsewhere.
-dnl
-AC_DEFUN(GST_CHECK_LIBHEADER,
-[
-  AC_CHECK_LIB([$2], [$3], HAVE_[$1]=yes, HAVE_[$1]=no,[$4])
-  if test "x$HAVE_[$1]" = "xyes"; then
-    AC_CHECK_HEADER([$5], :, HAVE_[$1]=no)
-    if test "x$HAVE_[$1]" = "xyes"; then
-      dnl execute what needs to be
-      ifelse([$6], , :, [$6])
-    else
-      ifelse([$7], , :, [$7])
-    fi
-  else
-    AC_MSG_WARN([$1] not found)
-  fi
-  AC_SUBST(HAVE_[$1])
-]
-)
-
-dnl
-dnl Add a subsystem --disable flag and all the necessary symbols and substitions
-dnl
-dnl GST_SUBSYSTEM_DISABLE(SYSNAME, [subsystem name])
-dnl
-AC_DEFUN(GST_SUBSYSTEM_DISABLE,
-[AC_ARG_ENABLE(translit([$1], A-Z, a-z), 
-[  ]builtin(format, --disable-%-17s  disable %s, translit([$1], A-Z, a-z), $2),
-[ case "${enableval}" in
-    yes) GST_DISABLE_[$1]=no ;;
-    no) GST_DISABLE_[$1]=yes ;;
-    *) AC_MSG_ERROR(bad value ${enableval} for --enable-translit([$1], A-Z, a-z)) ;;
-  esac],
-[GST_DISABLE_[$1]=no]) dnl Default value
-if test x$GST_DISABLE_[$1] = xyes; then
-  AC_DEFINE(GST_DISABLE_[$1], 1, [Disable $2])
-  GST_DISABLE_[$1]_DEFINE=-DGST_DISABLE_[$1]
-fi
-AM_CONDITIONAL(GST_DISABLE_[$1], test x$GST_DISABLE_[$1] = xyes)
-AC_SUBST(GST_DISABLE_[$1]_DEFINE)
-GST_SUBSYSTEM_DISABLE_DEFINES="$GST_SUBSYTEM_DISABLE_DEFINES $GST_DISABLE_[$1]_DEFINE"
-])
diff --git a/m4/gtk.m4 b/m4/gtk.m4
deleted file mode 100644
index b8cf4024a..000000000
--- a/m4/gtk.m4
+++ /dev/null
@@ -1,194 +0,0 @@
-# Configure paths for GTK+
-# Owen Taylor     97-11-3
-
-dnl AM_PATH_GTK([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
-dnl Test for GTK, and define GTK_CFLAGS and GTK_LIBS
-dnl
-AC_DEFUN(AM_PATH_GTK,
-[dnl 
-dnl Get the cflags and libraries from the gtk-config script
-dnl
-AC_ARG_WITH(gtk-prefix,[  --with-gtk-prefix=PFX   Prefix where GTK is installed (optional)],
-            gtk_config_prefix="$withval", gtk_config_prefix="")
-AC_ARG_WITH(gtk-exec-prefix,[  --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)],
-            gtk_config_exec_prefix="$withval", gtk_config_exec_prefix="")
-AC_ARG_ENABLE(gtktest, [  --disable-gtktest       Do not try to compile and run a test GTK program],
-		    , enable_gtktest=yes)
-
-  for module in . $4
-  do
-      case "$module" in
-         gthread) 
-             gtk_config_args="$gtk_config_args gthread"
-         ;;
-      esac
-  done
-
-  if test x$gtk_config_exec_prefix != x ; then
-     gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
-     if test x${GTK_CONFIG+set} != xset ; then
-        GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
-     fi
-  fi
-  if test x$gtk_config_prefix != x ; then
-     gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
-     if test x${GTK_CONFIG+set} != xset ; then
-        GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
-     fi
-  fi
-
-  AC_PATH_PROG(GTK_CONFIG, gtk-config, no)
-  min_gtk_version=ifelse([$1], ,0.99.7,$1)
-  AC_MSG_CHECKING(for GTK - version >= $min_gtk_version)
-  no_gtk=""
-  if test "$GTK_CONFIG" = "no" ; then
-    no_gtk=yes
-  else
-    GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
-    GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
-    gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-    gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-    gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-    if test "x$enable_gtktest" = "xyes" ; then
-      ac_save_CFLAGS="$CFLAGS"
-      ac_save_LIBS="$LIBS"
-      CFLAGS="$CFLAGS $GTK_CFLAGS"
-      LIBS="$GTK_LIBS $LIBS"
-dnl
-dnl Now check if the installed GTK is sufficiently new. (Also sanity
-dnl checks the results of gtk-config to some extent
-dnl
-      rm -f conf.gtktest
-      AC_TRY_RUN([
-#include <gtk/gtk.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-int 
-main ()
-{
-  int major, minor, micro;
-  char *tmp_version;
-
-  system ("touch conf.gtktest");
-
-  /* HP/UX 9 (%@#!) writes to sscanf strings */
-  tmp_version = g_strdup("$min_gtk_version");
-  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
-     printf("%s, bad version string\n", "$min_gtk_version");
-     exit(1);
-   }
-
-  if ((gtk_major_version != $gtk_config_major_version) ||
-      (gtk_minor_version != $gtk_config_minor_version) ||
-      (gtk_micro_version != $gtk_config_micro_version))
-    {
-      printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", 
-             $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
-             gtk_major_version, gtk_minor_version, gtk_micro_version);
-      printf ("*** was found! If gtk-config was correct, then it is best\n");
-      printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
-      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
-      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
-      printf("*** required on your system.\n");
-      printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
-      printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
-      printf("*** before re-running configure\n");
-    } 
-#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION)
-  else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
-	   (gtk_minor_version != GTK_MINOR_VERSION) ||
-           (gtk_micro_version != GTK_MICRO_VERSION))
-    {
-      printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
-	     GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
-      printf("*** library (version %d.%d.%d)\n",
-	     gtk_major_version, gtk_minor_version, gtk_micro_version);
-    }
-#endif /* defined (GTK_MAJOR_VERSION) ... */
-  else
-    {
-      if ((gtk_major_version > major) ||
-        ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
-        ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
-      {
-        return 0;
-       }
-     else
-      {
-        printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
-               gtk_major_version, gtk_minor_version, gtk_micro_version);
-        printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
-	       major, minor, micro);
-        printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
-        printf("***\n");
-        printf("*** If you have already installed a sufficiently new version, this error\n");
-        printf("*** probably means that the wrong copy of the gtk-config shell script is\n");
-        printf("*** being found. The easiest way to fix this is to remove the old version\n");
-        printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n");
-        printf("*** correct copy of gtk-config. (In this case, you will have to\n");
-        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
-        printf("*** so that the correct libraries are found at run-time))\n");
-      }
-    }
-  return 1;
-}
-],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
-       CFLAGS="$ac_save_CFLAGS"
-       LIBS="$ac_save_LIBS"
-     fi
-  fi
-  if test "x$no_gtk" = x ; then
-     AC_MSG_RESULT(yes)
-     ifelse([$2], , :, [$2])     
-  else
-     AC_MSG_RESULT(no)
-     if test "$GTK_CONFIG" = "no" ; then
-       echo "*** The gtk-config script installed by GTK could not be found"
-       echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
-       echo "*** your path, or set the GTK_CONFIG environment variable to the"
-       echo "*** full path to gtk-config."
-     else
-       if test -f conf.gtktest ; then
-        :
-       else
-          echo "*** Could not run GTK test program, checking why..."
-          CFLAGS="$CFLAGS $GTK_CFLAGS"
-          LIBS="$LIBS $GTK_LIBS"
-          AC_TRY_LINK([
-#include <gtk/gtk.h>
-#include <stdio.h>
-],      [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
-        [ echo "*** The test program compiled, but did not run. This usually means"
-          echo "*** that the run-time linker is not finding GTK or finding the wrong"
-          echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
-          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
-          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
-          echo "*** is required on your system"
-	  echo "***"
-          echo "*** If you have an old version installed, it is best to remove it, although"
-          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
-          echo "***"
-          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
-          echo "*** came with the system with the command"
-          echo "***"
-          echo "***    rpm --erase --nodeps gtk gtk-devel" ],
-        [ echo "*** The test program failed to compile or link. See the file config.log for the"
-          echo "*** exact error that occured. This usually means GTK was incorrectly installed"
-          echo "*** or that you have moved GTK since it was installed. In the latter case, you"
-          echo "*** may want to edit the gtk-config script: $GTK_CONFIG" ])
-          CFLAGS="$ac_save_CFLAGS"
-          LIBS="$ac_save_LIBS"
-       fi
-     fi
-     GTK_CFLAGS=""
-     GTK_LIBS=""
-     ifelse([$3], , :, [$3])
-  fi
-  AC_SUBST(GTK_CFLAGS)
-  AC_SUBST(GTK_LIBS)
-  rm -f conf.gtktest
-])
diff --git a/m4/pkg.m4 b/m4/pkg.m4
deleted file mode 100644
index 874a120cf..000000000
--- a/m4/pkg.m4
+++ /dev/null
@@ -1,56 +0,0 @@
-
-dnl PKG_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4, action-if, action-not)
-dnl defines GSTUFF_LIBS, GSTUFF_CFLAGS, see pkg-config man page
-dnl also defines GSTUFF_PKG_ERRORS on error
-AC_DEFUN(PKG_CHECK_MODULES, [
-  succeeded=no
-
-  if test -z "$PKG_CONFIG"; then
-    AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
-  fi
-
-  if test "$PKG_CONFIG" = "no" ; then
-     echo "*** The pkg-config script could not be found. Make sure it is"
-     echo "*** in your path, or set the PKG_CONFIG environment variable"
-     echo "*** to the full path to pkg-config."
-     echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
-  else
-     if ! $PKG_CONFIG --atleast-pkgconfig-version 0.7.0; then
-        echo "*** Your version of pkg-config is too old. You need version 0.7.0 or newer."
-        echo "*** See http://www.freedesktop.org/software/pkgconfig"
-     else
-        AC_MSG_CHECKING(for $2)
-
-        if $PKG_CONFIG --exists "$2" ; then
-            AC_MSG_RESULT(yes)
-            succeeded=yes
-
-            AC_MSG_CHECKING($1_CFLAGS)
-            $1_CFLAGS=`$PKG_CONFIG --cflags "$2"`
-            AC_MSG_RESULT($$1_CFLAGS)
-
-            AC_MSG_CHECKING($1_LIBS)
-            $1_LIBS=`$PKG_CONFIG --libs "$2"`
-            AC_MSG_RESULT($$1_LIBS)
-        else
-            $1_CFLAGS=""
-            $1_LIBS=""
-            ## If we have a custom action on failure, don't print errors, but 
-            ## do set a variable so people can do so.
-            $1_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"`
-            ifelse([$4], ,echo $$1_PKG_ERRORS,)
-        fi
-
-        AC_SUBST($1_CFLAGS)
-        AC_SUBST($1_LIBS)
-     fi
-  fi
-
-  if test $succeeded = yes; then
-     ifelse([$3], , :, [$3])
-  else
-     ifelse([$4], , AC_MSG_ERROR([Library requirements ($2) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.]), [$4])
-  fi
-])
-
-